1 Temat przez mseba

  • mseba
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-01-03
  • Posty: 32

Temat: MR3420 + ZTE 637

Padł mi w niedzielę mój modem E169 i pożyczyłem od kolegi modem ZTE637.
Niestety nie działa ten model pod Gargolcem. Czy jest szansa na to aby podłączyc się przez ten model ?
Mam  wersje Gargoyle:1.5.9.3 (r35400), by obsy.

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: MR3420 + ZTE 637

Nie znam tego modemu. Pokaż wynik cat /proc/bus/usb/devices po podłączeniu modemu do usb. I wynik logread

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez mseba

  • mseba
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-01-03
  • Posty: 32

Odp: MR3420 + ZTE 637

cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0031 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=P673A3ZTED010000
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Logread

Apr 22 00:35:48 Gargoyle kern.info kernel: [16602.470000] usb 1-1: new high-speed USB device number 4 using ehci-platform
Apr 22 00:35:48 Gargoyle kern.info kernel: [16602.620000] scsi2 : usb-storage 1-1:1.0
Apr 22 00:35:48 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P673A3ZTED010000
Apr 22 00:35:48 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:2000 for mode switching
Apr 22 00:35:48 Gargoyle syslog.notice usb_modeswitch: switching device 19d2:2000 on 001/004
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.040000] usb 1-1: USB disconnect, device number 4
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.440000] usb 1-1: new high-speed USB device number 5 using ehci-platform
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.590000] option 1-1:1.0: GSM modem (1-port) converter detected
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.600000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.600000] option 1-1:1.1: GSM modem (1-port) converter detected
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.610000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.620000] scsi3 : usb-storage 1-1:1.2
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.620000] option 1-1:1.3: GSM modem (1-port) converter detected
Apr 22 00:35:54 Gargoyle kern.info kernel: [16608.630000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Apr 22 00:35:55 Gargoyle kern.notice kernel: [16609.620000] scsi 3:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
Apr 22 00:35:55 Gargoyle kern.notice kernel: [16609.630000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Apr 22 00:36:20 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P673A3ZTED010000
Apr 22 00:36:20 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/19d2:0031 for mode switching
Apr 22 00:36:20 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:21 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:22 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:23 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:24 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:25 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:26 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
Apr 22 00:36:27 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P673A3ZTED010000
Apr 22 00:36:27 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Selecting /etc/usb_modeswitch.d/19d2:0031 for mode switching
Apr 22 00:36:27 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:28 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:29 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:30 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:31 Gargoyle daemon.notice pppd[19402]: pppd 2.4.5 started by root, uid 0
Apr 22 00:36:31 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: abort on (BUSY)
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: abort on (NO CARRIER)
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: abort on (ERROR)
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: report (CONNECT)
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: timeout set to 10 seconds
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: send (AT&F^M)
Apr 22 00:36:32 Gargoyle local2.info chat[19411]: expect (OK)
Apr 22 00:36:33 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:34 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Switching seemingly failed
Apr 22 00:36:35 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P673A3ZTED010000
Apr 22 00:36:35 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Selecting /etc/usb_modeswitch.d/19d2:0031 for mode switching
Apr 22 00:36:35 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:36 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:37 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:38 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:39 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:40 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:41 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Switching seemingly failed
Apr 22 00:36:42 Gargoyle local2.info chat[19411]: alarm
Apr 22 00:36:42 Gargoyle local2.info chat[19411]: Failed
Apr 22 00:36:42 Gargoyle daemon.err pppd[19402]: Connect script failed
Apr 22 00:36:42 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Manufacturer=ZTE,Incorporated Product=ZTE_WCDMA_Technologies_MSM Serial=P673A3ZTED010000
Apr 22 00:36:42 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Selecting /etc/usb_modeswitch.d/19d2:0031 for mode switching
Apr 22 00:36:42 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Switching seemingly failed
Apr 22 00:36:43 Gargoyle daemon.info pppd[19402]: Exit.
Apr 22 00:36:43 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Apr 22 00:36:43 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Switching seemingly failed

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,252

Odp: MR3420 + ZTE 637

Jaki port ustawiłeś? /dev/ttyUSB2 zobacz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez mseba

  • mseba
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-01-03
  • Posty: 32

Odp: MR3420 + ZTE 637

Dobre. Wcześniej jak ustawiałem na ten port to było bez zmian. A teraz działa.
Nie ważne, jest już późno i jest sukces.
Dzięki Czarek za pomoc jak zwykle skuteczną :-)