351 Odpowiedź przez Bartekk

  • Zarejestrowany: 2013-06-30
  • Posty: 889

Odp: TVheadend dla wr1043dn

Chodzi Ci o jakieś komunikaty? Wrzucam dmesg i logread po starcie systemu. Jak widzę w lsmod to załadowało jedynie dvb-usb, dvb-core i rc-core.

root@OpenWrt:~# dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.3.8 (bartekdebian2@debian2) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sun Apr 6 10:59:24 CEST 2014
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: ZyXEL NSA-310
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c031b680, node_mem_map c0347000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=5
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 256500k/256500k available, 5644k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc02df000   (2908 kB)
[    0.000000]       .init : 0xc02df000 - 0xc02fe000   ( 124 kB)
[    0.000000]       .data : 0xc02fe000 - 0xc031bd40   ( 120 kB)
[    0.000000]        .bss : 0xc031bd64 - 0xc0346630   ( 171 kB)
[    0.000000] NR_IRQS:114
[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
[    0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1
[    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[   11.414567] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[   11.504550] pid_max: default: 32768 minimum: 301
[   11.504692] Mount-cache hash table entries: 512
[   11.504998] CPU: Testing write buffer coherency: ok
[   11.505252] Setting up static identity map for 0x281e08 - 0x281e44
[   11.507018] NET: Registered protocol family 16
[   11.509243] Kirkwood: MV88F6281-A1, TCLK=200000000.
[   11.509259] Feroceon L2: Enabling L2
[   11.509296] Feroceon L2: Cache support initialised.
[   11.510401] initial MPP regs: 01111111 00003311 00001100 00000000 00000000 00000000 00000000
[   11.510426]   final MPP regs: 01111111 00003311 00001100 00000000 00000000 00000000 00000000
[   11.511326] Kirkwood PCIe port 0:
[   11.511333] link up
[   11.511341] PCI: bus0 uses PCIe port 0
[   11.511486] PCI host bridge to bus 0000:00
[   11.511501] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[   11.511513] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   11.511543] pci 0000:00:00.0: [11ab:6281] type 0 class 0x000580
[   11.511566] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd00fffff 64bit pref]
[   11.511581] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0fffffff]
[   11.511615] pci 0000:00:00.0: supports D1 D2
[   11.511652] pci 0000:00:01.0: [10ec:8168] type 0 class 0x000200
[   11.511675] pci 0000:00:01.0: reg 10: [io  0x0000-0x00ff]
[   11.511704] pci 0000:00:01.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref]
[   11.511727] pci 0000:00:01.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
[   11.511746] pci 0000:00:01.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[   11.511788] pci 0000:00:01.0: supports D1 D2
[   11.511798] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[   11.511847] PCI: bus0: Fast back to back transfers disabled
[   11.512186] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
[   11.512203] pci 0000:00:01.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
[   11.512223] pci 0000:00:01.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
[   11.512240] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x10ff]
[   11.517902] bio: create slab <bio-0> at 0
[   11.518807] SCSI subsystem initialized
[   11.519376] usbcore: registered new interface driver usbfs
[   11.519516] usbcore: registered new interface driver hub
[   11.519668] usbcore: registered new device driver usb
[   11.520774] Switching to clocksource orion_clocksource
[   11.522347] NET: Registered protocol family 2
[   11.522504] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   11.522790] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   11.522973] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[   11.523068] TCP: Hash tables configured (established 8192 bind 8192)
[   11.523077] TCP reno registered
[   11.523087] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   11.523110] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   11.523284] NET: Registered protocol family 1
[   11.523322] PCI: CLS 32 bytes, default 32
[   11.524840] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   11.524854] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   11.525186] msgmni has been set to 500
[   11.525389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   11.525402] io scheduler noop registered
[   11.525411] io scheduler deadline registered (default)
[   11.592543] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[   11.615266] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[   12.014529] console [ttyS0] enabled
[   12.019546] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
[   12.028223] Scanning device for bad blocks
[   12.032591] Bad eraseblock 2 at 0x000000040000
[   12.037102] Bad eraseblock 3 at 0x000000060000
[   12.137455] Creating 9 MTD partitions on "orion_nand":
[   12.142641] 0x000000000000-0x000000100000 : "uboot"
[   12.148443] 0x000000100000-0x000000180000 : "uboot_env"
[   12.154546] 0x000000180000-0x000000200000 : "key_store"
[   12.160594] 0x000000200000-0x000000280000 : "info"
[   12.166211] 0x000000280000-0x000000c80000 : "etc"
[   12.171742] 0x000000c80000-0x000001680000 : "kernel_1"
[   12.177705] 0x000001680000-0x000004640000 : "rootfs1"
[   12.183643] 0x000004640000-0x000005040000 : "kernel_2"
[   12.189607] 0x000005040000-0x000008000000 : "rootfs2"
[   12.195904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.202522] orion-ehci orion-ehci.0: Marvell Orion EHCI
[   12.207815] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   12.240821] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   12.260804] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   12.267309] hub 1-0:1.0: USB hub found
[   12.271111] hub 1-0:1.0: 1 port detected
[   12.275454] Initializing USB Mass Storage driver...
[   12.280527] usbcore: registered new interface driver usb-storage
[   12.286577] USB Mass Storage support registered.
[   12.291505] cpuidle: using governor ladder
[   12.296117] Registered led device: nsa310:green:sys
[   12.296257] Registered led device: nsa310:red:sys
[   12.296396] Registered led device: nsa310:green:hdd
[   12.296534] Registered led device: nsa310:red:hdd
[   12.296673] Registered led device: nsa310:green:esata
[   12.296815] Registered led device: nsa310:red:esata
[   12.296958] Registered led device: nsa310:green:usb
[   12.297098] Registered led device: nsa310:red:usb
[   12.297237] Registered led device: nsa310:green:copy
[   12.297377] Registered led device: nsa310:red:copy
[   12.297723] TCP cubic registered
[   12.300990] NET: Registered protocol family 17
[   12.305524] Bridge firewalling registered
[   12.309713] 8021q: 802.1Q VLAN Support v1.8
[   12.313955] Gating clock of unused units
[   12.313964] before: 0x00dfc3fd
[   12.313971]  after: 0x00c7c1cc
[   12.314179] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   12.320852] Waiting 5sec before mounting root device...
[   12.590811] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   12.743015] hub 1-1:1.0: USB hub found
[   12.747065] hub 1-1:1.0: 4 ports detected
[   13.031074] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[   13.142881] hub 1-1.2:1.0: USB hub found
[   13.147193] hub 1-1.2:1.0: 4 ports detected
[   13.231090] usb 1-1.3: new high-speed USB device number 4 using orion-ehci
[   13.431077] usb 1-1.2.2: new high-speed USB device number 5 using orion-ehci
[   13.544279] scsi0 : usb-storage 1-1.2.2:1.0
[   13.621091] usb 1-1.2.4: new full-speed USB device number 6 using orion-ehci
[   14.541776] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[   14.551849] sd 0:0:0:0: [sda] 4016128 512-byte logical blocks: (2.05 GB/1.91 GiB)
[   14.560158] sd 0:0:0:0: [sda] Write Protect is off
[   14.564992] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[   14.565458] sd 0:0:0:0: [sda] No Caching mode page present
[   14.570980] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   14.579706] sd 0:0:0:0: [sda] No Caching mode page present
[   14.585231] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   14.592240]  sda: sda1
[   14.596831] sd 0:0:0:0: [sda] No Caching mode page present
[   14.602359] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   14.608481] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   17.332214] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[   17.341209] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   17.367970] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   17.375096] VFS: Mounted root (ext2 filesystem) on device 8:1.
[   17.381364] Freeing init memory: 124K
[   21.026463] EXT4-fs (sda1): re-mounted. Opts: (null)
[   21.147861] libata version 3.00 loaded.
[   21.156509] sata_mv sata_mv.0: version 1.28
[   21.156643] sata_mv sata_mv.0: slots 32 ports 2
[   21.164206] scsi1 : sata_mv
[   21.167230] scsi2 : sata_mv
[   21.170185] ata1: SATA max UDMA/133 irq 21
[   21.174351] ata2: SATA max UDMA/133 irq 21
[   21.680818] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   21.701010] ata1.00: HPA detected: current 488395055, native 488397168
[   21.707580] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[   21.713631] ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   21.771005] ata1.00: configured for UDMA/133
[   21.775545] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[   21.785629] sd 1:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[   21.793353] sd 1:0:0:0: [sdb] Write Protect is off
[   21.798165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   21.798249] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.813998]  sdb: sdb1
[   21.817723] sd 1:0:0:0: [sdb] Attached SCSI disk
[   22.130813] ata2: SATA link down (SStatus 0 SControl F300)
[   42.549751] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.643177] nf_conntrack version 0.5.0 (4009 buckets, 16036 max)
[   42.772759] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   42.778389] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
[   42.784569] r8169 0000:00:01.0: eth0: RTL8168d/8111d at 0xd09ae000, 00:00:00:00:00:30, XID 083000c0 IRQ 9
[   42.794231] r8169 0000:00:01.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   42.814061] i2c-core: driver [dummy] registered
[   42.821457] i2c /dev entries driver
[   42.832552] i2c-dev: adapter [mv64xxx_i2c adapter] registered as minor 0
[   42.832588] i2c i2c-0: adapter [mv64xxx_i2c adapter] registered
[   42.842499] i2c-core: driver [lm85] registered
[   42.842518] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   42.842535] i2c i2c-0: master_xfer[0] W, addr=0x2c, len=0
[   42.843029] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   42.843045] i2c i2c-0: master_xfer[0] W, addr=0x2d, len=0
[   42.843142] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   42.843155] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=0
[   42.843250] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
[   42.843262] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
[   42.843569] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
[   42.843581] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
[   42.843887] i2c i2c-0: Creating lm85 at 0x2e
[   42.843956] i2c 0-002e: uevent
[   42.843995] lm85 0-002e: probe
[   42.844004] hwmon_vid: Unknown VRM version of your CPU
[   42.849171] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
[   42.849182] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
[   42.849905] i2c i2c-0: client [lm85] registered with bus id 0-002e
[   42.866575] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   42.881511] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[   42.928183] usbcore: registered new interface driver snd-usb-audio
[   44.086895] lm85 0-002e: uevent
[   44.736343] r8169 0000:00:01.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
[   44.752028] r8169 0000:00:01.0: eth0: link down
[   44.756585] r8169 0000:00:01.0: eth0: link down
[   44.762370] device eth0 entered promiscuous mode
[   46.533678] r8169 0000:00:01.0: eth0: link up
[   46.539018] br-lan: port 1(eth0) entered forwarding state
[   46.544487] br-lan: port 1(eth0) entered forwarding state
[   48.540804] br-lan: port 1(eth0) entered forwarding state
[   50.334057] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
[   50.334072] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
[   50.334395] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=2
[   50.334790] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=2
root@OpenWrt:~# logread
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.014529] console [ttyS0] enabled
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.019546] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.028223] Scanning device for bad blocks
Jan  1 00:00:32 OpenWrt kern.warn kernel: [   12.032591] Bad eraseblock 2 at 0x000000040000
Jan  1 00:00:32 OpenWrt kern.warn kernel: [   12.037102] Bad eraseblock 3 at 0x000000060000
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.137455] Creating 9 MTD partitions on "orion_nand":
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.142641] 0x000000000000-0x000000100000 : "uboot"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.148443] 0x000000100000-0x000000180000 : "uboot_env"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.154546] 0x000000180000-0x000000200000 : "key_store"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.160594] 0x000000200000-0x000000280000 : "info"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.166211] 0x000000280000-0x000000c80000 : "etc"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.171742] 0x000000c80000-0x000001680000 : "kernel_1"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.177705] 0x000001680000-0x000004640000 : "rootfs1"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.183643] 0x000004640000-0x000005040000 : "kernel_2"
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.189607] 0x000005040000-0x000008000000 : "rootfs2"
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.195904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.202522] orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.207815] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.240821] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.260804] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.267309] hub 1-0:1.0: USB hub found
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.271111] hub 1-0:1.0: 1 port detected
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.275454] Initializing USB Mass Storage driver...
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.280527] usbcore: registered new interface driver usb-storage
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.286577] USB Mass Storage support registered.
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.291505] cpuidle: using governor ladder
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296117] Registered led device: nsa310:green:sys
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296257] Registered led device: nsa310:red:sys
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296396] Registered led device: nsa310:green:hdd
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296534] Registered led device: nsa310:red:hdd
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296673] Registered led device: nsa310:green:esata
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296815] Registered led device: nsa310:red:esata
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.296958] Registered led device: nsa310:green:usb
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.297098] Registered led device: nsa310:red:usb
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.297237] Registered led device: nsa310:green:copy
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.297377] Registered led device: nsa310:red:copy
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.297723] TCP cubic registered
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.300990] NET: Registered protocol family 17
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   12.305524] Bridge firewalling registered
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.309713] 8021q: 802.1Q VLAN Support v1.8
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.313955] Gating clock of unused units
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.313964] before: 0x00dfc3fd
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   12.313971]  after: 0x00c7c1cc
Jan  1 00:00:32 OpenWrt kern.err kernel: [   12.314179] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.320852] Waiting 5sec before mounting root device...
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.590811] usb 1-1: new high-speed USB device number 2 using orion-ehci
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.743015] hub 1-1:1.0: USB hub found
Jan  1 00:00:32 OpenWrt kern.info kernel: [   12.747065] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.031074] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.142881] hub 1-1.2:1.0: USB hub found
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.147193] hub 1-1.2:1.0: 4 ports detected
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.231090] usb 1-1.3: new high-speed USB device number 4 using orion-ehci
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.431077] usb 1-1.2.2: new high-speed USB device number 5 using orion-ehci
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.544279] scsi0 : usb-storage 1-1.2.2:1.0
Jan  1 00:00:32 OpenWrt kern.info kernel: [   13.621091] usb 1-1.2.4: new full-speed USB device number 6 using orion-ehci
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   14.541776] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   14.551849] sd 0:0:0:0: [sda] 4016128 512-byte logical blocks: (2.05 GB/1.91 GiB)
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   14.560158] sd 0:0:0:0: [sda] Write Protect is off
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   14.564992] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan  1 00:00:32 OpenWrt kern.err kernel: [   14.565458] sd 0:0:0:0: [sda] No Caching mode page present
Jan  1 00:00:32 OpenWrt kern.err kernel: [   14.570980] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 00:00:32 OpenWrt kern.err kernel: [   14.579706] sd 0:0:0:0: [sda] No Caching mode page present
Jan  1 00:00:32 OpenWrt kern.err kernel: [   14.585231] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 00:00:32 OpenWrt kern.info kernel: [   14.592240]  sda: sda1
Jan  1 00:00:32 OpenWrt kern.err kernel: [   14.596831] sd 0:0:0:0: [sda] No Caching mode page present
Jan  1 00:00:32 OpenWrt kern.err kernel: [   14.602359] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   14.608481] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 00:00:32 OpenWrt kern.err kernel: [   17.332214] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Jan  1 00:00:32 OpenWrt kern.info kernel: [   17.341209] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
Jan  1 00:00:32 OpenWrt kern.info kernel: [   17.367970] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   17.375096] VFS: Mounted root (ext2 filesystem) on device 8:1.
Jan  1 00:00:32 OpenWrt kern.info kernel: [   17.381364] Freeing init memory: 124K
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.026463] EXT4-fs (sda1): re-mounted. Opts: (null)
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   21.147861] libata version 3.00 loaded.
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   21.156509] sata_mv sata_mv.0: version 1.28
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.156643] sata_mv sata_mv.0: slots 32 ports 2
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.164206] scsi1 : sata_mv
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.167230] scsi2 : sata_mv
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.170185] ata1: SATA max UDMA/133 irq 21
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.174351] ata2: SATA max UDMA/133 irq 21
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.680818] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.701010] ata1.00: HPA detected: current 488395055, native 488397168
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.707580] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.713631] ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.771005] ata1.00: configured for UDMA/133
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   21.775545] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   21.785629] sd 1:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   21.793353] sd 1:0:0:0: [sdb] Write Protect is off
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   21.798165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   21.798249] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 00:00:32 OpenWrt kern.info kernel: [   21.813998]  sdb: sdb1
Jan  1 00:00:32 OpenWrt kern.notice kernel: [   21.817723] sd 1:0:0:0: [sdb] Attached SCSI disk
Jan  1 00:00:32 OpenWrt kern.info kernel: [   22.130813] ata2: SATA link down (SStatus 0 SControl F300)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.549751] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.643177] nf_conntrack version 0.5.0 (4009 buckets, 16036 max)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.772759] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jan  1 00:00:32 OpenWrt kern.warn kernel: [   42.778389] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.784569] r8169 0000:00:01.0: eth0: RTL8168d/8111d at 0xd09ae000, 00:00:00:00:00:30, XID 083000c0 IRQ 9
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.794231] r8169 0000:00:01.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.814061] i2c-core: driver [dummy] registered
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.821457] i2c /dev entries driver
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.832552] i2c-dev: adapter [mv64xxx_i2c adapter] registered as minor 0
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.832588] i2c i2c-0: adapter [mv64xxx_i2c adapter] registered
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.842499] i2c-core: driver [lm85] registered
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.842518] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.842535] i2c i2c-0: master_xfer[0] W, addr=0x2c, len=0
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843029] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843045] i2c i2c-0: master_xfer[0] W, addr=0x2d, len=0
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843142] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843155] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=0
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843250] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843262] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843569] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843581] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843887] i2c i2c-0: Creating lm85 at 0x2e
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843956] i2c 0-002e: uevent
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.843995] lm85 0-002e: probe
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.844004] hwmon_vid: Unknown VRM version of your CPU
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.849171] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.849182] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   42.849905] i2c i2c-0: client [lm85] registered with bus id 0-002e
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.866575] input: gpio-keys as /devices/platform/gpio-keys/input/input0
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.881511] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
Jan  1 00:00:32 OpenWrt kern.info kernel: [   42.928183] usbcore: registered new interface driver snd-usb-audio
Jan  1 00:00:32 OpenWrt kern.debug kernel: [   44.086895] lm85 0-002e: uevent
Jan  1 00:00:33 OpenWrt kern.warn kernel: [   44.736343] r8169 0000:00:01.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
Jan  1 00:00:33 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Jan  1 00:00:33 OpenWrt kern.info kernel: [   44.752028] r8169 0000:00:01.0: eth0: link down
Jan  1 00:00:33 OpenWrt kern.info kernel: [   44.756585] r8169 0000:00:01.0: eth0: link down
Jan  1 00:00:33 OpenWrt kern.info kernel: [   44.762370] device eth0 entered promiscuous mode
Jan  1 00:00:33 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Jan  1 00:00:33 OpenWrt user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Jan  1 00:00:35 OpenWrt kern.info kernel: [   46.533678] r8169 0000:00:01.0: eth0: link up
Jan  1 00:00:35 OpenWrt kern.info kernel: [   46.539018] br-lan: port 1(eth0) entered forwarding state
Jan  1 00:00:35 OpenWrt kern.info kernel: [   46.544487] br-lan: port 1(eth0) entered forwarding state
Jan  1 00:00:37 OpenWrt kern.info kernel: [   48.540804] br-lan: port 1(eth0) entered forwarding state
Jan  1 00:00:38 OpenWrt authpriv.info dropbear[1839]: Running in background
Jan  1 00:00:38 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 00:00:38 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: started, version 2.66 cachesize 150
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: using local addresses only for domain lan
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: reading /tmp/resolv.conf.auto
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: using nameserver 8.8.8.8#53
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: using local addresses only for domain lan
Jan  1 00:00:38 OpenWrt daemon.info dnsmasq[1878]: read /etc/hosts - 1 addresses
Jan  1 00:00:38 OpenWrt kern.debug kernel: [   50.334057] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
Jan  1 00:00:38 OpenWrt kern.debug kernel: [   50.334072] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
Jan  1 00:00:38 OpenWrt kern.debug kernel: [   50.334395] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=2
Jan  1 00:00:38 OpenWrt kern.debug kernel: [   50.334790] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=2
Jan  1 00:00:39 OpenWrt user.info sysinit: setting up led HDD
Jan  1 00:00:39 OpenWrt user.info sysinit: setting up led Heartbeat
Jan  1 00:00:39 OpenWrt user.info sysinit: setting up led USB
Apr  7 15:05:00 OpenWrt authpriv.info dropbear[2026]: Child connection from 192.168.1.3:53730
Apr  7 15:05:04 OpenWrt authpriv.notice dropbear[2026]: Password auth succeeded for 'root' from 192.168.1.3:53730
Apr  7 15:05:42 OpenWrt kern.err kernel: [  103.787046] EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities
Apr  7 15:05:42 OpenWrt kern.info kernel: [  103.795802] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
Apr  7 15:05:42 OpenWrt kern.warn kernel: [  103.816010] EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
Apr  7 15:05:43 OpenWrt kern.info kernel: [  103.826099] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
root@OpenWrt:~#

352 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Nie do diaska. Nie chcę logów systemu po jego starcie. Załaduj moduły ręcznie i zobacz co wypisał Ci na konsoli i co zostawił w logach.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

353 Odpowiedź przez Bartekk

  • Zarejestrowany: 2013-06-30
  • Posty: 889

Odp: TVheadend dla wr1043dn

No właśnie nic nie wypisuje. Załadowałem je ręcznie i nic.

354 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Coś musi. Chociaż by błąd załadowania.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

355 Odpowiedź przez Bartekk

  • Zarejestrowany: 2013-06-30
  • Posty: 889

Odp: TVheadend dla wr1043dn

No jak Boga kocham nic nie wypisuje. Zobacz sam:

root@OpenWrt:~# insmod rc-core
root@OpenWrt:~# insmod dvb-core
root@OpenWrt:~# insmod dvb-usb
root@OpenWrt:~# insmod it913x-fe.ko
root@OpenWrt:~# insmod rc-it913x-v1.ko
root@OpenWrt:~# insmod rc-it913x-v2.ko
root@OpenWrt:~# insmod dvb-usb-it913x.ko
root@OpenWrt:~#

i lsmod

root@OpenWrt:~# lsmod
Module                  Size  Used by    Not tainted
dvb_usb                16080  0
dvb_core               69436  1 dvb_usb
rc_core                 8688  1 dvb_usb
usbhid                 20296  0
hid                    66464  1 usbhid
snd_usb_audio          67184  0
snd_usbmidi_lib        12588  1 snd_usb_audio
rtc_mv                  2188  0
gpio_keys               4004  0
evdev                   6584  0
lm85                   12872  0
i2c_mv64xxx             3308  0
i2c_dev                 4380  0
i2c_core               13532  4 dvb_usb,lm85,i2c_mv64xxx,i2c_dev
r8169                  34544  0
ledtrig_usbdev          1728  0
ledtrig_heartbeat        768  0
nf_nat_irc               760  0
nf_conntrack_irc        2364  1 nf_nat_irc
nf_nat_ftp               968  0
nf_conntrack_ftp        4348  1 nf_nat_ftp
ipt_MASQUERADE           916  1
iptable_nat             2328  1
nf_nat                  9534  4 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
xt_conntrack            2204  3
xt_CT                   1172  0
xt_NOTRACK               476  0
iptable_raw              552  1
xt_state                 612  0
nf_conntrack_ipv4       4416  6 iptable_nat,nf_nat
nf_defrag_ipv4           628  1 nf_conntrack_ipv4
nf_conntrack           36208 12 nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_conntrack,xt_CT,xt_NOTRACK,xt_state,nf_conntrack_ipv4
hwmon_vid               1516  1 lm85
ipt_REJECT              1540  2
xt_TCPMSS               2388  0
ipt_LOG                 5996  0
xt_comment               396 18
xt_multiport            1168  0
xt_mac                   548  0
xt_limit                1020  1
iptable_mangle           700  1
iptable_filter           584  1
ip_tables               9120  4 iptable_nat,iptable_raw,iptable_mangle,iptable_filter
xt_tcpudp               1628  3
x_tables                8648 18 ipt_MASQUERADE,iptable_nat,xt_conntrack,xt_CT,xt_NOTRACK,iptable_raw,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_comment,xt_multiport,xt_mac,xt_limit,iptable_mangle,iptable_filter,ip_tables,xt_tcpudp
hwmon                    676  1 lm85
snd_pcm_oss            29444  0
snd_mixer_oss          10828  1 snd_pcm_oss
snd_pcm                46968  2 snd_usb_audio,snd_pcm_oss
snd_timer              13256  1 snd_pcm
snd_rawmidi            12768  1 snd_usbmidi_lib
snd_seq_device          3536  1 snd_rawmidi
snd_hwdep               3936  1 snd_usb_audio
snd_page_alloc          3784  1 snd_pcm
snd                    31772  9 snd_usb_audio,snd_usbmidi_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
soundcore               3332  1 snd
vfat                    7336  0
fat                    39104  1 vfat
nls_iso8859_1           2812  0
nls_cp437               4340  0
crc_ccitt                896  0
input_core             18680  9 dvb_usb,rc_core,usbhid,hid,gpio_keys,evdev,snd
mv_cesa                 7224  0
aes_generic            32820  1 mv_cesa
crypto_blkcipher        9266  1 mv_cesa
cryptomgr               1628  0
aead                    3564  1 cryptomgr
sata_mv                19676  1
libata                110916  1 sata_mv
crypto_hash             7556  1 mv_cesa
crypto_algapi           8556  6 mv_cesa,aes_generic,crypto_blkcipher,cryptomgr,aead,crypto_hash

356 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

A gdzie właściwie masz te moduły fizycznie na dysku?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

357 Odpowiedź przez Bartekk

  • Zarejestrowany: 2013-06-30
  • Posty: 889

Odp: TVheadend dla wr1043dn

/lib/modules/3.3.8

358 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

No to insmod dvb-usb-it913x a nie insmod dvb-usb-it913x.ko

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

359 Odpowiedź przez Bartekk

  • Zarejestrowany: 2013-06-30
  • Posty: 889

Odp: TVheadend dla wr1043dn

No masz

Jan  1 00:00:40 OpenWrt kern.warn kernel: [   52.014829] DVB: registering adapter 0 frontend 0 (ITE 9135(9006) Generic_1)...
Jan  1 00:00:40 OpenWrt kern.info kernel: [   52.022311] dvb-usb: ITE 9135(9006) Generic successfully initialized and connected.
Jan  1 00:00:40 OpenWrt kern.info kernel: [   52.030000] it913x: DEV registering device driver
Jan  1 00:00:40 OpenWrt kern.info kernel: [   52.034840] usbcore: registered new interface driver it913x

Dziękuje bardzo za pomoc! smile

360 Odpowiedź przez pawkon

  • pawkon
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-03-18
  • Posty: 208

Odp: TVheadend dla wr1043dn

Idac dalej w temacie dotyczacym samego tvheadenda, bo tunery juz pieknie dzialaja za co jeszcze raz dziekuje Cezaremu, cz taki wdr4300 pociagnie transkodowanie? W nowym tv headend jest opcja transcode i nawet ja sobie zaznaczylem bo chcialem sprobowac jak to bedzie dzialac i czy ogolnie sie uda. Jak dla mnie nawet jesli bedzie utylizacja procka na poziomie 90% to bedzie okey. Ale nie udalo mi sie odpalic tego. Probowalem z opcjami jakie byly podawane na forum oficjalnym tvheadenda ale cos nie bardzo. Udawalo mi sie zmienic tylko pomiedzy matroska a mpeg costam ale w zadnym wypadku nie chcial mi zmienic rozdzielczosci co przede wszystkim zaoszczedzilo by pasmo internetu. Wiec pytania mam 2. Jedno do Cezarego a mianowicie czy ten tvheadend ktory kompilowales ma wszystko do tego zeby to uruchomic ? Wiem ze instaluja sie jakies kodeki podczas instalacji tvheadenda, jest opcja transkodowania i zgodnie z info na forum tvh transkodowanie jest dostepne na glownej galezi tvh. 2 pytanie to jak to uruchomic? Czy ktos probowal itp. Mysle ze wielu osoba pomoglo by to gdyby udalo sie jakos uruchomic. A moze ktos wie jak uruchomic transkodowanie poprzecz addon w xbmc ? Podobnosie da ale nie ma tam opcji do wlaczenia transkodowania. Odrazu zaznacze ze nie chce uzywac tvh guide. Zreszta tam sie da tylko przelaczyc pomiedzy kodekami ale rozdzielczosci tez sie nie da zmienic

361 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Nie pociągnie. 680MHz Atheros robił mi online jakieś 3kl/s na sekundę smile

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

362 Odpowiedź przez pawkon

  • pawkon
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-03-18
  • Posty: 208

Odp: TVheadend dla wr1043dn

A da sie zrobic cokolwiek zeby zmniejszyc pasmo? Czy tuner sam w sobie nie moglby dekodowac? Moze dodanie karty graficznej? Cokolwiek? Moze wymyslam ale zmniejszenie przepustowosci jest dla mnie wazne

363 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

To znaczy że musisz mu dać jeszcze więcej pracy żeby zmniejszyć rozmiar.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

364 Odpowiedź przez zygzak

  • zygzak
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-06-18
  • Posty: 120

Odp: TVheadend dla wr1043dn

Witam
Idę wg poradnika, po wykonaniu insmod dvb-usb-it913x mam coś takiego:

[...]
[ 1965.080000] [<800cecd0>] 0x800cecd0
[ 1965.080000] [<8008fd84>] 0x8008fd84
[ 1965.090000] [<800a3610>] 0x800a3610
[ 1965.090000] [<800c932c>] 0x800c932c
[ 1965.100000] [<8006a2e4>] 0x8006a2e4
[ 1965.100000]
[ 1965.100000] Mem-Info:
[ 1965.100000] Normal per-cpu:
[ 1965.110000] CPU    0: hi:    0, btch:   1 usd:   0
[ 1965.110000] active_anon:325 inactive_anon:353 isolated_anon:0
[ 1965.110000]  active_file:1169 inactive_file:844 isolated_file:0
[ 1965.110000]  unevictable:0 dirty:0 writeback:0 unstable:0
[ 1965.110000]  free:551 slab_reclaimable:522 slab_unreclaimable:1710
[ 1965.110000]  mapped:456 shmem:72 pagetables:96 bounce:0
[ 1965.140000] Normal free:2204kB min:720kB low:900kB high:1080kB active_anon:1300kB inactive_anon:1412kB active_file:4676kB inactive_file:3376kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:32512kB mlocked:0kB dirty:0kB writeback:0kB mapped:1824kB shmem:288kB slab_reclaimable:2088kB slab_unreclaimable:6840kB kernel_stack:512kB pagetables:384kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 1965.180000] lowmem_reserve[]: 0 0
[ 1965.180000] Normal: 193*4kB 95*8kB 34*16kB 2*32kB 1*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2204kB
[ 1965.190000] 2130 total pagecache pages
[ 1965.200000] 45 pages in swap cache
[ 1965.200000] Swap cache stats: add 288, delete 243, find 128/141
[ 1965.210000] Free swap  = 507624kB
[ 1965.210000] Total swap = 507896kB
[ 1965.210000] 8192 pages RAM
[ 1965.220000] 903 pages reserved
[ 1965.220000] 2482 pages shared
[ 1965.220000] 5505 pages non-shared
[ 1965.230000] dvb-usb: ITE 9135(9006) Generic error while loading driver (-12)
[ 1965.230000] it913x: DEV it913x Error
[ 1965.240000] usbcore: registered new interface driver it913x

Z czym mam problem?

365 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Na jakiej wersji openwrt to robisz?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

366 Odpowiedź przez zygzak

  • zygzak
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-06-18
  • Posty: 120

Odp: TVheadend dla wr1043dn

gargoyle 1.5.11.7

367 Odpowiedź przez zygzak

  • zygzak
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-06-18
  • Posty: 120

Odp: TVheadend dla wr1043dn

Czyli co? Zła wersja gargoyle? Coś z pamięcią?

368 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Lub nieobsługiwany stick dvb-t. Nie wiem, nie miałem jeszcze czasu sprawdzić tej wersji którą napisałeś.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

369 Odpowiedź przez zygzak

  • zygzak
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-06-18
  • Posty: 120

Odp: TVheadend dla wr1043dn

Ten stick to MT4171  na IT9135, ładowałem pakiety wg uzupełnienia w art. dla tego chipa. Firmware z eko.one, dwa pliki.
Widzę że 2014-04-04 miała miejsce aktualizacja modułów dvb, może to rzeczywiście konflikt wersji.

370 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Numer wersji kernela się nie zmienił.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

371 Odpowiedź przez COVERek

  • Skąd: Miasto Włókniarzy
  • Zarejestrowany: 2010-07-14
  • Posty: 499

Odp: TVheadend dla wr1043dn

# insmod dvb-usb
insmod: can't insert 'dvb-usb': unknown symbol in module, or unknown parameter

Mam takie cudo...

# logread | grep dvb
Apr 25 23:31:44 p11 kern.warn kernel: [   73.590000] dvb_usb: Unknown symbol dvb_net_init (err 0)
Apr 25 23:31:44 p11 kern.warn kernel: [   73.600000] dvb_usb: Unknown symbol dvb_net_release (err 0)
Apr 25 23:31:44 p11 user.info sysinit: insmod: can't insert 'dvb-usb': unknown symbol in module, or unknown parameter

co się zepsuło?
1.6.0.5 + TL-WDR4300 v1

ZyXEL NBG6716 (Gargoyle by obsy)

COVERek's Strona

372 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

dvb-core nie załadowałeś?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

373 Odpowiedź przez COVERek

  • Skąd: Miasto Włókniarzy
  • Zarejestrowany: 2010-07-14
  • Posty: 499

Odp: TVheadend dla wr1043dn

chyba jest problem przy rtl2832u, poniewaz pamietam ze trzeba było inny dvb-core załadować.. Twoj dvb-core działa z dvb-usb, ale alternatywny nie odpala juz dvb-usb... i nie mozna uruchomic karty. ;/ co z tym zrobic?

ZyXEL NBG6716 (Gargoyle by obsy)

COVERek's Strona

374 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,895

Odp: TVheadend dla wr1043dn

Jaki znów alternatywny? smile U mnie jest jeden przecież.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

375 Odpowiedź przez zigi

  • zigi
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-10
  • Posty: 363

Odp: TVheadend dla wr1043dn

Mam dvb-t z tym scalakiem i działa na x86 bardzo dobrze. Kolejność ładowania modułów:
1 - dvb-core
2 - rc-core
3 - dvb-usb
4 - dvb-usb-rtl2832u
Nie wymaga ładowania firmware.