• Zarejestrowany: 2012-03-31
  • Posty: 93

Temat: MR-3020 + samba nie startuje...

Witam,
Posiadam router TL-MR3020.
Zainstalowałem najnowsze OpenWRT kolegi Cezarego.
Wrzuciłem Hub usb, na pendrive karta 2GB na swap i exroot.
Podpiąłem dysk 320 GB w kieszeni.
Zainstalowałem sobie sambe i niestety... działa.
Po restarcie natomiast leży.
muszę sobie odpalic konsole i klepnąć:

/etc/init.d/samba start

Prosiłbym o jakąś małą pomoc.

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

/etc/init.d/samba enable

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

niestety nie pomaga, już to ćwiczyłem.

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

Więc przyczyna jest inna - np. nie masz list interfaces w konfigu i nie startuje zanim siec się nie pojawi.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

Napisz proszę co to jest to list interfaces? i jak sprawdzic czy nie strartuje zanim pojawi sie siec?

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

Po pierwsze: pokaż wynik poleceń

opkg list_installed *samba*
uci show samba

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez redink77 (edytowany przez redink77 2012-03-31 21:21:36)

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

root@LuCI:/$ opkg list_installed *samba*
samba36-server - 3.6.3-1
root@LuCI:/$

root@LuCI:/$ uci show samba
samba.@samba[0]=samba
samba.@samba[0].name=LuCI
samba.@samba[0].workgroup=GRUPA_ROBOCZA
samba.@samba[0].description=320GB
samba.@samba[0].homes=0
samba.@sambashare[0]=sambashare
samba.@sambashare[0].name=HDD
samba.@sambashare[0].path=/mnt/hdd/samba
samba.@sambashare[0].read_only=no
samba.@sambashare[0].guest_ok=yes
samba.@sambashare[0].create_mask=0777
samba.@sambashare[0].dir_mask=0777

Tak to wygląda. sama samba z "palca" startuje i działa świetnie... no tylko ze po restarcie trzeba ją ręcznie popchnąć.
TP-Link jest podpięty jako DHCP Client, wifi działa w trybie AP.

Na linuszku mam dwa tunery, ale tam samba miała konfigurację w /etc/samba/smb.conf
nigdy nie miałem problemów ze startem usługi, z widocznością zasobów i owszem, ale takie cos trafiło mnie się pierwszy raz.

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

Do pliku /etc/config/samba dodaj sobie do pierwszej sekcji

list interfaces lan

Tu config powstaje z /etc/samba/smb.conf.template oraz w/w pliku. Możesz modyfikować recznie i dostosować ja jak chcesz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

config samba
        option 'name'                   'LuCI'
        option 'workgroup'              'GRUPA_ROBOCZA'
        option 'description'            '320GB'
        option 'homes'                  '0'
        list 'interface'               'lan'

config sambashare
        option 'name'                   'HDD'
        option 'path'                   '/mnt/hdd/samba'
        option 'read_only'              'no'
        option 'guest_ok'               'yes'
        option 'create_mask'            '0777'
        option 'dir_mask'               '0777'

Tak to wyglada i niestety nadal bez rezultatów. po restarcie samba lezy.

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

A po starcie robi się w /tmp/etc/ plik smb.conf?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

Plik smb.conf tworzy mi się w katalogu /var . W katalogu /etc/samba mam link do niego.

W katalogu /tmp/log tworzą sie po kazdym starcie pliki log.smbd i log.nmbd niestety ich wielkosc jest równa 0b.

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

Więc podczas uruchomienia same skrypty się uruchamiają, bo to one robią ten konfig. Poszukaj czemu Ci się nie chce demon uruchomić.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

Jakieś podpowiedzi? jak to zrobić ?

14 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

System Log

Mar 31 22:47:03 LuCI kern.warn kernel: [    0.000000]     0: 0x00000000 -> 0x00002000
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 802dbca0, node_mem_map 81000000
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Mar 31 22:47:03 LuCI kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.000000] Kernel command line:  board=TL-MR3020 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 31 22:47:03 LuCI kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mar 31 22:47:03 LuCI kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] Memory: 29212k/32768k available (2153k kernel code, 3556k reserved, 391k data, 196k init, 0k highmem)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] NR_IRQS:48
Mar 31 22:47:03 LuCI kern.info kernel: [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Mar 31 22:47:03 LuCI kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Mar 31 22:47:03 LuCI kern.info kernel: [    0.090000] NET: Registered protocol family 16
Mar 31 22:47:03 LuCI kern.info kernel: [    0.090000] MIPS: machine is TP-LINK TL-MR3020
Mar 31 22:47:03 LuCI kern.info kernel: [    0.330000] bio: create slab <bio-0> at 0
Mar 31 22:47:03 LuCI kern.info kernel: [    0.340000] Switching to clocksource MIPS
Mar 31 22:47:03 LuCI kern.info kernel: [    0.350000] NET: Registered protocol family 2
Mar 31 22:47:03 LuCI kern.info kernel: [    0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.350000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.350000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.360000] TCP: Hash tables configured (established 1024 bind 1024)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.370000] TCP reno registered
Mar 31 22:47:03 LuCI kern.info kernel: [    0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.380000] NET: Registered protocol family 1
Mar 31 22:47:03 LuCI kern.debug kernel: [    0.390000] PCI: CLS 0 bytes, default 32
Mar 31 22:47:03 LuCI kern.info kernel: [    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mar 31 22:47:03 LuCI kern.info kernel: [    0.410000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mar 31 22:47:03 LuCI kern.info kernel: [    0.420000] msgmni has been set to 57
Mar 31 22:47:03 LuCI kern.info kernel: [    0.430000] io scheduler noop registered
Mar 31 22:47:03 LuCI kern.info kernel: [    0.430000] io scheduler deadline registered (default)
Mar 31 22:47:03 LuCI kern.info kernel: [    0.430000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mar 31 22:47:03 LuCI kern.info kernel: [    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
Mar 31 22:47:03 LuCI kern.info kernel: [    0.450000] console [ttyATH0] enabled, bootconsole disabled
Mar 31 22:47:03 LuCI kern.warn kernel: [    0.470000] m25p80 spi0.0: found s25sl032a, expected m25p80
Mar 31 22:47:03 LuCI kern.info kernel: [    0.470000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.480000] 5 tp-link partitions found on MTD device spi0.0
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.480000] Creating 5 MTD partitions on "spi0.0":
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.490000] 0x000000000000-0x000000020000 : "u-boot"
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.490000] 0x000000020000-0x000000102f28 : "kernel"
Mar 31 22:47:03 LuCI kern.warn kernel: [    0.500000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.510000] 0x000000102f28-0x0000003f0000 : "rootfs"
Mar 31 22:47:03 LuCI kern.warn kernel: [    0.510000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.530000] mtd: partition "rootfs" set to be root filesystem
Mar 31 22:47:03 LuCI kern.info kernel: [    0.530000] mtd: partition "rootfs_data" created automatically, ofs=370000, len=80000
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.540000] 0x000000370000-0x0000003f0000 : "rootfs_data"
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.550000] 0x0000003f0000-0x000000400000 : "art"
Mar 31 22:47:03 LuCI kern.notice kernel: [    0.550000] 0x000000020000-0x0000003f0000 : "firmware"
Mar 31 22:47:03 LuCI kern.info kernel: [    0.800000] ag71xx_mdio: probed
Mar 31 22:47:03 LuCI kern.info kernel: [    0.800000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Mar 31 22:47:03 LuCI kern.info kernel: [    1.410000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Mar 31 22:47:03 LuCI kern.info kernel: [    1.410000] TCP westwood registered
Mar 31 22:47:03 LuCI kern.info kernel: [    1.420000] NET: Registered protocol family 17
Mar 31 22:47:03 LuCI kern.notice kernel: [    1.420000] Bridge firewalling registered
Mar 31 22:47:03 LuCI kern.info kernel: [    1.420000] 8021q: 802.1Q VLAN Support v1.8
Mar 31 22:47:03 LuCI kern.err kernel: [    1.430000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Mar 31 22:47:03 LuCI kern.info kernel: [    1.440000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Mar 31 22:47:03 LuCI kern.info kernel: [    1.450000] Freeing unused kernel memory: 196k freed
Mar 31 22:47:03 LuCI kern.debug kernel: [    3.560000] Registered led device: tp-link:green:3g
Mar 31 22:47:03 LuCI kern.debug kernel: [    3.560000] Registered led device: tp-link:green:wlan
Mar 31 22:47:03 LuCI kern.debug kernel: [    3.560000] Registered led device: tp-link:green:lan
Mar 31 22:47:03 LuCI kern.debug kernel: [    3.560000] Registered led device: tp-link:green:wps
Mar 31 22:47:03 LuCI kern.info kernel: [    6.780000] eth0: link up (100Mbps/Full duplex)
Mar 31 22:47:03 LuCI kern.notice kernel: [    6.870000] JFFS2 notice: (443) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 17 of xref (0 dead, 4 orphan) found.
Mar 31 22:47:03 LuCI kern.notice kernel: [    8.530000] SCSI subsystem initialized
Mar 31 22:47:03 LuCI kern.info kernel: [    8.710000] usbcore: registered new interface driver usbfs
Mar 31 22:47:03 LuCI kern.info kernel: [    8.710000] usbcore: registered new interface driver hub
Mar 31 22:47:03 LuCI kern.info kernel: [    8.720000] usbcore: registered new device driver usb
Mar 31 22:47:03 LuCI kern.info kernel: [    9.210000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 31 22:47:03 LuCI kern.info kernel: [    9.210000] ath79-ehci ar933x-ehci: Atheros built-in EHCI controller
Mar 31 22:47:03 LuCI kern.info kernel: [   33.870000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Mar 31 22:47:03 LuCI kern.info kernel: [   33.880000] cfg80211: Calling CRDA for country: US
Mar 31 22:47:03 LuCI kern.info kernel: [   33.970000] cfg80211: Regulatory domain changed to country: US
Mar 31 22:47:03 LuCI kern.info kernel: [   33.980000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 31 22:47:03 LuCI kern.info kernel: [   33.990000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Mar 31 22:47:03 LuCI kern.info kernel: [   33.990000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Mar 31 22:47:03 LuCI kern.info kernel: [   34.000000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:03 LuCI kern.info kernel: [   34.010000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:03 LuCI kern.info kernel: [   34.020000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:03 LuCI kern.info kernel: [   34.020000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Mar 31 22:47:03 LuCI kern.info kernel: [   34.460000] PPP generic driver version 2.4.2
Mar 31 22:47:03 LuCI kern.info kernel: [   34.620000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 31 22:47:04 LuCI kern.info kernel: [   37.170000] Adding 499964k swap on /dev/sdb2.  Priority:-1 extents:1 across:499964k
Mar 31 22:47:05 LuCI user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.2.12_ehci_hcd Product=Atheros_built-in_EHCI_controller Serial=ar933x-ehci
Mar 31 22:47:05 LuCI user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB_2.0_Hub Serial=?
Mar 31 22:47:06 LuCI user.notice fstab: e2fsck (/dev/sda1): /dev/sda1: clean, 13/19537920 files, 1364684/78142160 blocks
Mar 31 22:47:06 LuCI user.notice usb-modeswitch: 1-1.4:1.0: Manufacturer=? Product=USB_2.0_Hub Serial=?
Mar 31 22:47:06 LuCI kern.info kernel: [   38.520000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
Mar 31 22:47:06 LuCI kern.info kernel: [   38.580000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mar 31 22:47:06 LuCI user.notice usb-modeswitch: 1-1.4.3:1.0: Manufacturer=JMicron Product=USB_to_ATA/ATAPI_Bridge Serial=5D165FFFFFFF
Mar 31 22:47:06 LuCI user.notice usb-modeswitch: 1-1.4.4:1.0: Manufacturer=Generic Product=USB2.0-CRW Serial=20090815198100000
Mar 31 22:47:08 LuCI kern.info kernel: [   40.670000] cfg80211: Calling CRDA for country: PL
Mar 31 22:47:10 LuCI kern.info kernel: [   42.470000] device wlan0 entered promiscuous mode
Mar 31 22:47:11 LuCI kern.info kernel: [   43.830000] cfg80211: Calling CRDA to update world regulatory domain
Mar 31 22:47:12 LuCI kern.info kernel: [   44.820000] device wlan0 left promiscuous mode
Mar 31 22:47:12 LuCI kern.info kernel: [   44.820000] br-lan: port 1(wlan0) entering disabled state
Mar 31 22:47:12 LuCI kern.info kernel: [   45.170000] device wlan0 entered promiscuous mode
Mar 31 22:47:14 LuCI user.info sysinit: Loading defaults
Mar 31 22:47:14 LuCI user.info sysinit: Loading synflood protection
Mar 31 22:47:15 LuCI user.info sysinit: Adding custom chains
Mar 31 22:47:15 LuCI user.info sysinit: Loading zones
Mar 31 22:47:17 LuCI user.info sysinit: Loading forwardings
Mar 31 22:47:17 LuCI user.info sysinit: Loading rules
Mar 31 22:47:18 LuCI user.info sysinit: Loading redirects
Mar 31 22:47:18 LuCI user.info sysinit: Loading includes
Mar 31 22:47:18 LuCI user.info sysinit: Optimizing conntrack
Mar 31 22:47:18 LuCI user.info sysinit: Loading interfaces
Mar 31 22:47:19 LuCI authpriv.info dropbear[1483]: Running in background
Mar 31 22:47:20 LuCI user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mar 31 22:47:20 LuCI user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mar 31 22:47:20 LuCI daemon.info dnsmasq[1545]: started, version 2.59 cachesize 150
Mar 31 22:47:20 LuCI daemon.info dnsmasq[1545]: compile time options: IPv6 GNU-getopt no-DBus no-i18n DHCP TFTP no-conntrack no-IDN
Mar 31 22:47:20 LuCI daemon.info dnsmasq[1545]: using local addresses only for domain lan
Mar 31 22:47:20 LuCI daemon.warn dnsmasq[1545]: no servers found in /tmp/resolv.conf.auto, will retry
Mar 31 22:47:20 LuCI daemon.info dnsmasq[1545]: read /etc/hosts - 1 addresses
Mar 31 22:47:21 LuCI user.info sysinit: setting up led USB
Mar 31 22:47:21 LuCI user.info sysinit: setting up led WLAN
Mar 31 22:47:21 LuCI user.info sysinit: setting up led LAN
Mar 31 22:47:22 LuCI user.notice mr3020: W trybie 3G
Mar 31 22:47:42 LuCI user.notice fstab: Mount enabled for /dev/sdb1 but it doesn't have a defined mountpoint (target)
Mar 31 22:47:46 LuCI user.notice ifup: Enabling Router Solicitations on loopback (lo)
Mar 31 22:47:46 LuCI kern.info kernel: [   79.250000] device eth0 entered promiscuous mode
Mar 31 22:47:47 LuCI kern.info kernel: [   79.790000] eth0: link up (100Mbps/Full duplex)
Mar 31 22:47:48 LuCI kern.info kernel: [   80.330000] br-lan: port 2(eth0) entering forwarding state
Mar 31 22:47:48 LuCI kern.info kernel: [   80.330000] br-lan: port 2(eth0) entering forwarding state
Mar 31 22:47:48 LuCI kern.info kernel: [   80.340000] br-lan: port 1(wlan0) entering forwarding state
Mar 31 22:47:48 LuCI kern.info kernel: [   80.340000] br-lan: port 1(wlan0) entering forwarding state
Mar 31 22:47:49 LuCI kern.info kernel: [   81.600000] cfg80211: World regulatory domain updated:
Mar 31 22:47:49 LuCI kern.info kernel: [   81.600000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.610000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.620000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.620000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.630000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.640000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.690000] cfg80211: Calling CRDA for country: PL
Mar 31 22:47:49 LuCI kern.info kernel: [   81.760000] cfg80211: Regulatory domain changed to country: PL
Mar 31 22:47:49 LuCI kern.info kernel: [   81.760000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.770000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.780000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.790000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 31 22:47:49 LuCI kern.info kernel: [   81.790000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Mar 31 22:47:50 LuCI user.notice ifup: Allowing Router Advertisements on lan (br-lan)
Mar 31 22:47:51 LuCI user.info firewall: adding lan (br-lan) to zone lan
Mar 31 22:47:52 LuCI daemon.info dnsmasq[1545]: reading /tmp/resolv.conf.auto
Mar 31 22:47:52 LuCI daemon.info dnsmasq[1545]: using nameserver 192.168.1.1#53
Mar 31 22:47:52 LuCI daemon.info dnsmasq[1545]: using local addresses only for domain lan
Mar 31 22:49:08 LuCI kern.info kernel: [   95.360000] br-lan: port 2(eth0) entering forwarding state
Mar 31 22:49:08 LuCI kern.info kernel: [   95.360000] br-lan: port 1(wlan0) entering forwarding state

Kernel Log

[    0.000000] Linux version 3.2.12 (cezary@eko.one.pl) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #6 Thu Mar 29 19:33:47 CEST 2012
[    0.000000] MyLoader: sysp=7ab7c29c, boardp=07ac6486, parts=24fed496
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802dbca0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-MR3020 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29212k/32768k available (2153k kernel code, 3556k reserved, 391k data, 196k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-MR3020
[    0.330000] bio: create slab <bio-0> at 0
[    0.340000] Switching to clocksource MIPS
[    0.350000] NET: Registered protocol family 2
[    0.350000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.350000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.350000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.360000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.370000] TCP reno registered
[    0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.380000] NET: Registered protocol family 1
[    0.390000] PCI: CLS 0 bytes, default 32
[    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.420000] msgmni has been set to 57
[    0.430000] io scheduler noop registered
[    0.430000] io scheduler deadline registered (default)
[    0.430000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.450000] console [ttyATH0] enabled, bootconsole disabled
[    0.470000] m25p80 spi0.0: found s25sl032a, expected m25p80
[    0.470000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
[    0.480000] 5 tp-link partitions found on MTD device spi0.0
[    0.480000] Creating 5 MTD partitions on "spi0.0":
[    0.490000] 0x000000000000-0x000000020000 : "u-boot"
[    0.490000] 0x000000020000-0x000000102f28 : "kernel"
[    0.500000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.510000] 0x000000102f28-0x0000003f0000 : "rootfs"
[    0.510000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.530000] mtd: partition "rootfs" set to be root filesystem
[    0.530000] mtd: partition "rootfs_data" created automatically, ofs=370000, len=80000
[    0.540000] 0x000000370000-0x0000003f0000 : "rootfs_data"
[    0.550000] 0x0000003f0000-0x000000400000 : "art"
[    0.550000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.800000] ag71xx_mdio: probed
[    0.800000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    1.410000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.410000] TCP westwood registered
[    1.420000] NET: Registered protocol family 17
[    1.420000] Bridge firewalling registered
[    1.420000] 8021q: 802.1Q VLAN Support v1.8
[    1.430000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.440000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.450000] Freeing unused kernel memory: 196k freed
[    3.560000] Registered led device: tp-link:green:3g
[    3.560000] Registered led device: tp-link:green:wlan
[    3.560000] Registered led device: tp-link:green:lan
[    3.560000] Registered led device: tp-link:green:wps
[    6.780000] eth0: link up (100Mbps/Full duplex)
[    6.870000] JFFS2 notice: (443) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 17 of xref (0 dead, 4 orphan) found.
[    8.530000] SCSI subsystem initialized
[    8.710000] usbcore: registered new interface driver usbfs
[    8.710000] usbcore: registered new interface driver hub
[    8.720000] usbcore: registered new device driver usb
[    9.210000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.210000] ath79-ehci ar933x-ehci: Atheros built-in EHCI controller
[    9.220000] ath79-ehci ar933x-ehci: new USB bus registered, assigned bus number 1
[    9.260000] ath79-ehci ar933x-ehci: irq 3, io mem 0x1b000000
[    9.280000] ath79-ehci ar933x-ehci: USB 2.0 started, EHCI 1.00
[    9.280000] hub 1-0:1.0: USB hub found
[    9.280000] hub 1-0:1.0: 1 port detected
[    9.400000] Initializing USB Mass Storage driver...
[    9.410000] usbcore: registered new interface driver usb-storage
[    9.410000] USB Mass Storage support registered.
[    9.620000] usb 1-1: new high-speed USB device number 2 using ath79-ehci
[    9.770000] hub 1-1:1.0: USB hub found
[    9.770000] hub 1-1:1.0: 4 ports detected
[   10.050000] usb 1-1.4: new high-speed USB device number 3 using ath79-ehci
[   10.160000] hub 1-1.4:1.0: USB hub found
[   10.160000] hub 1-1.4:1.0: 4 ports detected
[   10.440000] usb 1-1.4.3: new high-speed USB device number 4 using ath79-ehci
[   10.550000] usb-storage 1-1.4.3:1.0: Quirks match for vid 152d pid 2329: 8020
[   10.560000] scsi0 : usb-storage 1-1.4.3:1.0
[   10.640000] usb 1-1.4.4: new high-speed USB device number 5 using ath79-ehci
[   11.010000] scsi1 : usb-storage 1-1.4.4:1.0
[   11.600000] scsi 0:0:0:0: Direct-Access     ST932032 5AS                   PQ: 0 ANSI: 2 CCS
[   11.610000] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[   11.620000] sd 0:0:0:0: [sda] Write Protect is off
[   11.620000] sd 0:0:0:0: [sda] Mode Sense: 34 00 00 00
[   11.620000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   11.990000]  sda: sda1
[   12.000000] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.010000] scsi 1:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   12.770000] sd 1:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[   12.780000] sd 1:0:0:0: [sdb] Write Protect is off
[   12.780000] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   12.780000] sd 1:0:0:0: [sdb] No Caching mode page present
[   12.780000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   12.790000] sd 1:0:0:0: [sdb] No Caching mode page present
[   12.800000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   12.820000]  sdb: sdb1 sdb2
[   12.830000] sd 1:0:0:0: [sdb] No Caching mode page present
[   12.830000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   12.840000] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[   31.120000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   31.280000] eth0: link down
[   32.780000] Compat-wireless backport release: compat-wireless-2012-02-27-1-r31139
[   32.790000] Backport based on wireless-testing.git master-2012-02-27
[   32.820000] cfg80211: Calling CRDA to update world regulatory domain
[   33.270000] cfg80211: World regulatory domain updated:
[   33.270000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.280000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.280000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   33.290000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   33.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.870000] ath: EEPROM regdomain: 0x0
[   33.870000] ath: EEPROM indicates default country code should be used
[   33.870000] ath: doing EEPROM country->regdmn map search
[   33.870000] ath: country maps to regdmn code: 0x3a
[   33.870000] ath: Country alpha2 being used: US
[   33.870000] ath: Regpair used: 0x3a
[   33.870000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   33.870000] Registered led device: ath9k-phy0
[   33.870000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   33.880000] cfg80211: Calling CRDA for country: US
[   33.970000] cfg80211: Regulatory domain changed to country: US
[   33.980000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.990000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   33.990000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   34.000000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.010000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.020000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.020000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   34.460000] PPP generic driver version 2.4.2
[   34.620000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   34.850000] NET: Registered protocol family 24
[   34.920000] nf_conntrack version 0.5.0 (459 buckets, 1836 max)
[   35.260000] usbcore: registered new interface driver cdc_acm
[   35.260000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   35.280000] usbcore: registered new interface driver usblp
[   35.310000] usbcore: registered new interface driver usbserial
[   35.310000] USB Serial support registered for generic
[   35.320000] usbcore: registered new interface driver usbserial_generic
[   35.320000] usbserial: USB Serial Driver core
[   35.530000] USB Serial support registered for GSM modem (1-port)
[   35.540000] usbcore: registered new interface driver option
[   35.540000] option: v0.7.2:USB Driver for GSM modems
[   35.560000] USB Serial support registered for Sierra USB modem
[   35.560000] usbcore: registered new interface driver sierra
[   35.570000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   35.690000] mr3020-gpio: TL-MR3020 GPIO exporter version 0.0.1
[   35.700000] mr3020-gpio: Cezary Jackiewicz <cezary@eko.one.pl>
[   37.170000] Adding 499964k swap on /dev/sdb2.  Priority:-1 extents:1 across:499964k
[   38.520000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   38.580000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   40.670000] cfg80211: Calling CRDA for country: PL
[   42.470000] device wlan0 entered promiscuous mode
[   43.830000] cfg80211: Calling CRDA to update world regulatory domain
[   44.820000] device wlan0 left promiscuous mode
[   44.820000] br-lan: port 1(wlan0) entering disabled state
[   45.170000] device wlan0 entered promiscuous mode
[   79.250000] device eth0 entered promiscuous mode
[   79.790000] eth0: link up (100Mbps/Full duplex)
[   80.330000] br-lan: port 2(eth0) entering forwarding state
[   80.330000] br-lan: port 2(eth0) entering forwarding state
[   80.340000] br-lan: port 1(wlan0) entering forwarding state
[   80.340000] br-lan: port 1(wlan0) entering forwarding state
[   81.600000] cfg80211: World regulatory domain updated:
[   81.600000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   81.610000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.620000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   81.620000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   81.630000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.640000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.690000] cfg80211: Calling CRDA for country: PL
[   81.760000] cfg80211: Regulatory domain changed to country: PL
[   81.760000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   81.770000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   81.780000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   81.790000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   81.790000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   95.360000] br-lan: port 2(eth0) entering forwarding state
[   95.360000] br-lan: port 1(wlan0) entering forwarding state

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

W /etc/init.d/samba masz uruchomienie demona smbd (service_start /usr/sbin/smbd -D). Zaremuj tą linię (#) i zrób np.

/usr/sbin/smbd -D >> /tmp/log.txt

Reboot i zobacz czy coś w  /tmp/log.txt jest.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

Wiec zrobiłem jak napisałeś linijkę service_start /usr/sbin/smbd -D zaremowałem.
poniżej wrzuciłem:
/usr/sbin/smbd -D >> /tmp/logsambyyy.txt
po reboocie samba lezy jak lezała. Plik się utworzył, niestety 0b wielkości.

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

To zamiast tej linii wstaw:

(sleep 10 && /usr/sbin/smbd -D) &

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

sleep 60 dało radę. ale cieszy mnie to tylko połowicznie. chciałbym wiedzieć co jest przyczyną iż proces wywala sie jesli startuje się go bez opóźnienia.

Ach i jeszcze jedno mnie martwi. taki wpis znalazłem
Mar 31 22:47:42 LuCI user.notice fstab: Mount enabled for /dev/sdb1 but it doesn't have a defined mountpoint (target)
o co chodzi?

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

Sprawę z sambą możesz na dev.openwrt.org zgłosić, tym bardziej że dotyczy to nowego pakietu.

uci show fstab

Nie masz zapewne zdefiniowanego target w jeden z sekcji w której /dev/sdb1 masz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez redink77

  • Zarejestrowany: 2012-03-31
  • Posty: 93

Odp: MR-3020 + samba nie startuje...

Faktycznie Brakowało

option target '/overlay'

Mam jeszcze pytanie. Czym rózni sie wywołanie samby za pomocą
service_start /usr/sbin/smbd -D

od zwykłego

/usr/sbin/smbd -D ?

czy dla porządku dałoby radę klepnąć coś takiego?

service_start sleep 60 && /usr/sbin/smbd -D

bo niestety jesli dam tak to samba nie startuje.

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,914

Odp: MR-3020 + samba nie startuje...

service_start to funkcja która zajmuje się zrobieniem pidów, przekazywaniem argumentów itd. To nie jest wyjście ż tym sleep - zgłaszaj że Ci nie działa i tyle.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona