Temat: ASUS TUF AX6000 - boot z spi i error -5 na ubi
W skrócie - pacjent żył sobie spokojnie przez ostatni rok dzielnie mieląc światłowód 2gbps z bajerami jak wireguard, robił za nasa, zbieracz smsów z kodami autoryzacyjnymi, logi wysyłał do sysloga aż... zresetował się i nie wstał
po uarcie wypluwa coś takiego, no nie wygląda to za ciekawie i choć mam backup z którego postawiłem 1043nd, to jednak miłoby było odzyskać bazę vnstata zanim spróbuję zaorać flasha
F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 0209 [010F]
Jump to BL
NOTICE: BL2: v2.6(release):
NOTICE: BL2: Built : 14:42:59, Jul 22 2022
NOTICE: WDT: disabled
NOTICE: CPU: MT7986 (2000MHz)
NOTICE: EMI: Using DDR4 settings
NOTICE: EMI: Detected DRAM size: 512MB
NOTICE: EMI: complex R/W mem test passed
NOTICE: SPI_NAND parses attributes from parameter page.
NOTICE: SPI_NAND Detected ID 0xef
NOTICE: Page size 2048, Block size 131072, size 268435456
NOTICE: BL2: Booting BL31
NOTICE: BL31: v2.6(release):
NOTICE: BL31: Built : 14:43:05, Jul 22 2022
U-Boot 2022.04-rc1 (Aug 02 2023 - 10:35:50 +0800)
TUF-AX6000 bootloader version: 1.0.0.5
CPU: MediaTek MT7986
Model: mt7986-rfb
DRAM: 512 MiB
Core: 43 devices, 15 uclasses, devicetree: embed
MMC: mmc@11230000: 0
Loading Environment from MTD...
SPINAND raw ID: 00 EF AA 22
spi-nand: spi_nand spi_nand@1: Winbond W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@1: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128, ECC strength 8/512, custom ECC status.
*** Warning - bad CRC, using default environment
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
ASUS TUF-AX6000 gpio/led init
Net:
Warning: ethernet1@15100000 (eth0) using random MAC address - xx:xx:xx:xx:xx:xx
eth0: ethernet1@15100000
Warning: ethernet0@15100000 (eth1) using random MAC address - xx:xx:xx:xx:xx:xx
, eth1: ethernet0@15100000
ubi0: attaching mtd4
ubi0: scanning is finished
ubi0: attached mtd4 (name "UBI_DEV", size 252 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 8, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 16418/14818, WL threshold: 4096, image sequence number: 1648108063
ubi0: available PEBs: 2, total reserved PEBs: 2014, PEBs reserved for bad PEB handling: 40
UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name
UBI: 0 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 5 nvram
UBI: 1 8 1 0 dynamic 1f000 8 f8000 1f000 0 0 7 Factory
UBI: 2 8 1 0 dynamic 1f000 8 f8000 1f000 0 0 8 Factory2
UBI: 3 21 1 0 dynamic 1f000 21 3ff000 1f000 0 0 5 linux
UBI: 4 242 1 0 dynamic 1f000 242 45fe000 1f000 0 0 6 linux2
UBI: 5 2 1 0 dynamic 1f000 2 3e000 1f000 0 0 5 jffs2
UBI: 6 43 1 0 dynamic 1f000 43 81d000 1f000 0 0 6 rootfs
UBI: 7 4f9 1 0 dynamic 1f000 4f9 9a27000 1f000 0 0 b rootfs_data
UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume
UBI volume [linux] size 3ff000 smaller than 45fe000!
Read 1015808 bytes from volume Factory to 000000005f707ac0
EEPROM set 0: OK (version 80)
Read 1015808 bytes from volume Factory2 to 000000005f707ac0
EEPROM set 1: OK (version 80)
Read 1015808 bytes from volume Factory to 000000005fb42630
Select EEPROM set 0 at offset 0x0.
Please choose the operation:
1: Load System code to SDRAM via TFTP.
2: Load System code then write to Flash via TFTP.
3: Boot System code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
0
3: Boot System code via Flash (default).
TUF-AX6000 bootloader version: 1.0.0.5
MAC Address: xx:xx:xx:xx:xx:xx
HwID A
Read 40 bytes from volume linux to 0000000046000000
FIT/FDT format image found at 0x46000000,size 0x3f4934
Read 4147548 bytes from volume linux to 0000000046000000
## Loading kernel from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.6.83
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x460000e8
Data Size: 4122758 Bytes = 3.9 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x48000000
Entry Point: 0x48000000
Hash algo: crc32
Hash value: 7c493fd3
Hash algo: sha1
Hash value: 04c1e712772fa637503792c8e06481d2d849e148
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt asus_tuf-ax6000 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x463eeab0
Data Size: 22870 Bytes = 22.3 KiB
Architecture: AArch64
Load Address: 0x47000000
Hash algo: crc32
Hash value: 65ecb7da
Hash algo: sha1
Hash value: 0e0c798e4977e795eaee94c762e6eb43cd3a518b
Verifying Hash Integrity ... crc32+ sha1+ OK
Loading fdt from 0x463eeab0 to 0x47000000
Booting using the fdt blob at 0x47000000
Read 40 bytes from volume linux2 to 000000005f7ffb90
Uncompressing Kernel Image
Loading Device Tree to 000000005f7f3000, end 000000005f7fb955 ... OK
volume linux seq: 4
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.83 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Mar 28 16:26:03 2025
[ 0.000000] Machine model: ASUS TUF-AX6000
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
[ 0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
[ 0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
[ 0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
[ 0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
[ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff]
[ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff]
[ 0.000000] node 0: [mem 0x000000004ffc0000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
[ 0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line:
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000005fcc4000-0x000000005fdc4000] (1MB)
[ 0.000000] Memory: 496120K/524288K available (9024K kernel code, 1000K rwdata, 1672K rodata, 448K init, 307K bss, 28168K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: 0xffffffc080010080
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000066] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000072] pid_max: default: 32768 minimum: 301
[ 0.002038] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.002045] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.003589] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.003973] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.004071] rcu: Hierarchical SRCU implementation.
[ 0.004073] rcu: Max phase no-delay instances is 1000.
[ 0.004387] smp: Bringing up secondary CPUs ...
[ 0.004645] Detected VIPT I-cache on CPU1
[ 0.004678] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.004705] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004990] Detected VIPT I-cache on CPU2
[ 0.005010] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.005021] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005277] Detected VIPT I-cache on CPU3
[ 0.005294] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.005304] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005332] smp: Brought up 1 node, 4 CPUs
[ 0.005335] SMP: Total of 4 processors activated.
[ 0.005337] CPU features: detected: 32-bit EL0 Support
[ 0.005339] CPU features: detected: CRC32 instructions
[ 0.005364] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005367] CPU: All CPU(s) started at EL2
[ 0.005369] alternatives: applying system-wide alternatives
[ 0.008075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.008089] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.008960] pinctrl core: initialized pinctrl subsystem
[ 0.009776] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010264] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.010284] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.010299] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.010595] thermal_sys: Registered thermal governor 'fair_share'
[ 0.010598] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.010599] thermal_sys: Registered thermal governor 'step_wise'
[ 0.010601] thermal_sys: Registered thermal governor 'user_space'
[ 0.010640] ASID allocator initialised with 65536 entries
[ 0.011319] pstore: Using crash dump compression: deflate
[ 0.011323] pstore: Registered ramoops as persistent store backend
[ 0.011324] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.012243] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[ 0.016819] Modules: 29616 pages in range for non-PLT usage
[ 0.016828] Modules: 521136 pages in range for PLT usage
[ 0.017732] cryptd: max_cpu_qlen set to 1000
[ 0.018578] SCSI subsystem initialized
[ 0.018723] libata version 3.00 loaded.
[ 0.019729] clocksource: Switched to clocksource arch_sys_counter
[ 0.021331] NET: Registered PF_INET protocol family
[ 0.021410] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.022414] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.022424] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.022430] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.022450] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.022536] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.022763] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
[ 0.022834] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.022846] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.023070] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.023091] PCI: CLS 0 bytes, default 64
[ 0.023948] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.027209] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.027213] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.048670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.052688] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.055644] printk: console [ttyS0] disabled
[ 0.075980] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
[ 0.076018] printk: console [ttyS0] enabled
[ 0.866607] mtk_rng 1020f000.rng: registered RNG driver
[ 0.874731] loop: module loaded
[ 0.879410] spi-nand spi0.0: Winbond SPI NAND was found.
[ 0.884736] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 0.893091] 2 fixed-partitions partitions found on MTD device spi0.0
[ 0.899617] Creating 2 MTD partitions on "spi0.0":
[ 0.904500] 0x000000000000-0x000000400000 : "bootloader"
[ 0.912803] 0x000000400000-0x000010000000 : "UBI_DEV"
[ 1.093560] ubi0: default fastmap pool size: 100
[ 1.098172] ubi0: default fastmap WL pool size: 50
[ 1.102953] ubi0: attaching mtd1
[ 1.799727] random: crng init done
[ 2.395780] ubi0: scanning is finished
[ 2.408130] ubi0: attached mtd1 (name "UBI_DEV", size 252 MiB)
[ 2.413972] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.420830] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.427596] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.434538] ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
[ 2.440612] ubi0: user volume: 8, internal volumes: 1, max. volumes count: 128
[ 2.447811] ubi0: max/mean erase counter: 16418/14818, WL threshold: 4096, image sequence number: 1648108063
[ 2.457615] ubi0: available PEBs: 0, total reserved PEBs: 2016, PEBs reserved for bad PEB handling: 40
[ 2.466903] ubi0: background thread "ubi_bgt0d" started, PID 264
[ 2.467728] block ubiblock0_6: created from ubi0:6(rootfs)
[ 2.478386] ubiblock: device ubiblock0_6 (rootfs) set to be root filesystem
[ 2.611397] mtk_soc_eth 15100000.ethernet: generated random MAC address xx:xx:xx:xx:xx:xx
[ 2.730795] Maxlinear Ethernet GPY211C mdio-bus:05: Firmware Version: 8.111 (0x886F)
[ 2.739948] Maxlinear Ethernet GPY211C mdio-bus:06: Firmware Version: 8.111 (0x886F)
[ 2.750286] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081580000, irq 120
[ 2.760070] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc081580000, irq 120
[ 2.769701] i2c_dev: i2c /dev entries driver
[ 2.775260] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 2.783767] NET: Registered PF_INET6 protocol family
[ 2.789342] Segment Routing with IPv6
[ 2.793032] In-situ OAM (IOAM) with IPv6
[ 2.796977] NET: Registered PF_PACKET protocol family
[ 2.802056] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.815103] 8021q: 802.1Q VLAN Support v1.8
[ 2.871291] mt7530-mdio mdio-bus:1f: no interrupt support
[ 2.907909] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
[ 2.916857] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 2.927763] MediaTek MT7531 PHY mt7530-0:01: Configure LED registers (num=14)
[ 2.942304] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 2.964219] MediaTek MT7531 PHY mt7530-0:02: Configure LED registers (num=14)
[ 2.978757] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 3.000361] MediaTek MT7531 PHY mt7530-0:03: Configure LED registers (num=14)
[ 3.014893] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 3.036536] MediaTek MT7531 PHY mt7530-0:04: Configure LED registers (num=14)
[ 3.051072] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=POLL)
[ 3.062329] mt7530-mdio mdio-bus:1f lan5 (uninitialized): PHY [mdio-bus:05] driver [Maxlinear Ethernet GPY211C] (irq=POLL)
[ 3.073782] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[ 3.080500] DSA: tree 0 setup
[ 3.083733] clk: Disabling unused clocks
[ 3.093353] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.100631] Freeing unused kernel memory: 448K
[ 3.105153] Run /sbin/init as init process
[ 3.109234] with arguments:
[ 3.112201] /sbin/init
[ 3.114892] with environment:
[ 3.118016] HOME=/
[ 3.120401] TERM=linux
[ 3.304666] init: Console is alive
[ 3.308162] init: - watchdog -
[ 3.869488] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.901445] usbcore: registered new interface driver usbfs
[ 3.906959] usbcore: registered new interface driver hub
[ 3.912315] usbcore: registered new device driver usb
[ 3.921483] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.933578] xhci-mtk 11200000.usb: xHCI Host Controller
[ 3.938818] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[ 3.949332] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[ 3.958492] xhci-mtk 11200000.usb: irq 124, io mem 0x11200000
[ 3.964353] xhci-mtk 11200000.usb: xHCI Host Controller
[ 3.969565] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[ 3.976947] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 3.984340] hub 1-0:1.0: USB hub found
[ 3.988094] hub 1-0:1.0: 2 ports detected
[ 3.992408] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.000813] hub 2-0:1.0: USB hub found
[ 4.004567] hub 2-0:1.0: 1 port detected
[ 4.013150] usbcore: registered new interface driver usb-storage
[ 4.019960] usbcore: registered new interface driver uas
[ 4.025466] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.039687] init: - preinit -
[ 4.315370] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 4.323840] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 4.524714] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.778701] mount_root: loading kmods from internal overlay
[ 8.793148] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 8.800960] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 9.056884] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 9.065150] block: unable to load configuration (fstab: Entry not found)
[ 9.071891] block: attempting to load /tmp/overlay/etc/config/fstab
[ 9.078183] block: unable to load configuration (fstab: Entry not found)
[ 9.085031] block: attempting to load /etc/config/fstab
[ 9.093600] block: unable to load configuration (fstab: Entry not found)
[ 9.100404] block: no usable configuration
[ 9.107643] UBIFS (ubi0:7): Mounting in unauthenticated mode
[ 9.113371] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 841
[ 9.152140] UBIFS error (ubi0:7 pid 839): 0xffffffc0802f4d54: bad master node at offset 61440 error 3
[ 9.161348] magic 0x6101831
[ 9.164994] crc 0x257ed327
[ 9.168725] node_type 7 (master node)
[ 9.172895] group_type 0 (no node group)
[ 9.177233] sqnum 30155520282
[ 9.181053] len 512
[ 9.184178] highest_inum 4294967040
[ 9.187909] commit number 571401
[ 9.191296] flags 0x3
[ 9.194420] log_lnum 6
[ 9.197371] root_lnum 911
[ 9.200498] root_offs 488
[ 9.203623] root_len 68
[ 9.206661] gc_lnum 669
[ 9.209792] ihead_lnum 911
[ 9.212918] ihead_offs 2048
[ 9.216128] index_size 317944
[ 9.219513] lpt_lnum 8
[ 9.222467] lpt_offs 69802
[ 9.225765] nhead_lnum 8
[ 9.228715] nhead_offs 71680
[ 9.232015] ltab_lnum 8
[ 9.234966] ltab_offs 69632
[ 9.238263] lsave_lnum 0
[ 9.241217] lsave_offs 0
[ 9.244168] lscan_lnum 412
[ 9.247292] leb_cnt 1273
[ 9.250505] empty_lebs 997
[ 9.253629] idx_lebs 27
[ 9.256667] total_free 126914560
[ 9.260313] total_dirty 23273096
[ 9.263872] total_used 9611136
[ 9.267342] total_dead 40752
[ 9.270645] total_dark 7276920
[ 9.274123] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" stops
[ 9.282290] UBIFS (ubi0:7): Mounting in unauthenticated mode
[ 9.288004] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 844
[ 9.326603] UBIFS error (ubi0:7 pid 837): 0xffffffc0802f4d54: bad master node at offset 61440 error 3
[ 9.335821] magic 0x6101831
[ 9.339467] crc 0x257ed327
[ 9.343207] node_type 7 (master node)
[ 9.347372] group_type 0 (no node group)
[ 9.351721] sqnum 30155520282
[ 9.355539] len 512
[ 9.358663] highest_inum 4294967040
[ 9.362405] commit number 571401
[ 9.365790] flags 0x3
[ 9.368915] log_lnum 6
[ 9.371877] root_lnum 911
[ 9.375003] root_offs 488
[ 9.378127] root_len 68
[ 9.381168] gc_lnum 669
[ 9.384293] ihead_lnum 911
[ 9.387418] ihead_offs 2048
[ 9.390631] index_size 317944
[ 9.394016] lpt_lnum 8
[ 9.396967] lpt_offs 69802
[ 9.400267] nhead_lnum 8
[ 9.403218] nhead_offs 71680
[ 9.406515] ltab_lnum 8
[ 9.409466] ltab_offs 69632
[ 9.412765] lsave_lnum 0
[ 9.415716] lsave_offs 0
[ 9.418667] lscan_lnum 412
[ 9.421794] leb_cnt 1273
[ 9.425005] empty_lebs 997
[ 9.428128] idx_lebs 27
[ 9.431169] total_free 126914560
[ 9.434813] total_dirty 23273096
[ 9.438370] total_used 9611136
[ 9.441847] total_dead 40752
[ 9.445145] total_dark 7276920
[ 9.448624] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" stops
[ 9.455175] mount_root: failed to mount -t ubifs /dev/ubi0_7 /tmp/overlay: Invalid argument
[ 9.465839] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 9.493074] procd: - early -
[ 9.496002] procd: - watchdog -
Failed to connect to ubus
[ 10.033911] procd: - watchdog -
[ 10.051646] procd: - ubus -
[ 10.131749] procd: - init -
Please press Enter to activate this console.
[ 10.343978] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.375116] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[ 10.384726] tun: Universal TUN/TAP device driver, 1.6
[ 10.398091] ntfs3: Enabled Linux POSIX ACLs support
[ 10.405060] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 10.423004] usbcore: registered new interface driver cdc_acm
[ 10.428659] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 10.437391] usbcore: registered new interface driver cdc_wdm
[ 10.443403] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 10.447895] urngd: v1.0.2 started.
[ 10.450895] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 10.466540] usbcore: registered new interface driver usblp
[ 10.474229] usbcore: registered new interface driver usbserial_generic
[ 10.480797] usbserial: USB Serial support registered for generic
[ 10.487425] usbcore: registered new interface driver cdc_ether
[ 10.494107] usbcore: registered new interface driver cdc_ncm
[ 10.506926] usbcore: registered new interface driver huawei_cdc_ncm
[ 10.863494] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823160656a
[ 10.863494]
[ 11.038448] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823160721
[ 11.130342] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823160840
[ 11.236754] mt798x-wmac 18000000.wifi: missing precal data, size=403472
[ 11.243428] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
[ 11.301149] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
[ 11.452090] PPP generic driver version 2.4.2
[ 11.457171] NET: Registered PF_PPPOX protocol family
[ 11.463390] usbcore: registered new interface driver qmi_wwan
[ 11.470179] usbcore: registered new interface driver rndis_host
[ 11.477195] usbcore: registered new interface driver sierra
[ 11.482914] usbserial: USB Serial support registered for Sierra USB modem
[ 11.492538] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 11.500369] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 11.510834] usbcore: registered new interface driver cdc_mbim
[ 11.517929] usbcore: registered new interface driver option
[ 11.523548] usbserial: USB Serial support registered for GSM modem (1-port)
[ 11.532105] usbcore: registered new interface driver qcserial
[ 11.537886] usbserial: USB Serial support registered for Qualcomm USB modem
[ 11.545003] kmodloader: done loading kernel modules from /etc/modules.d/*
login[2158]: root login on 'console'
BusyBox v1.36.1 (2025-01-04 10:56:06 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| |
| OpenWrt 24.10-SNAPSHOT, r28566-1c1c373943 |
| |
| Build time: 2025-03-29 07:38 UTC |
| Cezary Jackiewicz, https://eko.one.pl |
| |
-----------------------------------------------------------------------------
| Machine: ASUS TUF-AX6000 |
| Uptime: 0d, 00:00:15 |
| Load: 0.23 0.05 0.02 |
| Flash: total: 8.2MB, free: 0B, used: 100% |
| Memory: total: 484.9MB, free: 412.9MB, used: 14% |
| Leases: 0 |
uci: Entry not found
-----------------------------------------------------------------------------
| CPU temp: 31.86 C |
| Wi-Fi chip temp: 37.00 C, 35.00 C |
| Ethernet chip temp: 33.35 C, 32.72 C |
-----------------------------------------------------------------------------
=== WARNING! ================================================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
-----------------------------------------------------------------------------
root@(none):~#co się rzuca w oczy to
[ 9.152140] UBIFS error (ubi0:7 pid 839): 0xffffffc0802f4d54: bad master node at offset 61440 error 3
[ 9.448624] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" stops
[ 9.455175] mount_root: failed to mount -t ubifs /dev/ubi0_7 /tmp/overlay: Invalid argumentjest szansa ratować czy od razu ubiformat i jeździć obserwować?
spodziewam się dwóch opcji: po zaoraniu i wgraniu aktualnego snapshota wstanie i pójdzie dalej, albo stwierdzi, że nie wstanie i tak będzie leżał co zakwalifikuje go do wizyty w serwisie
z ntfsem, starymi extami sobie radzę... ale readonly overlaye są dla mnie jeszcze są nowościa w debugowaniu (bo działają i nie wymagają opieki)