1 Temat przez kafarowski (edytowany przez kafarowski 2025-07-20 14:22:32)

  • Zarejestrowany: 2017-05-27
  • Posty: 43

Temat: NBG7815 Gargoyle brak wifi

Pacjent:

----------------------------------------------------------------------------
 |         _____                             _          _____  _            |
 |        |  __ \                           | |        |  __ \| |           |
 |        | |  \/ __ _ _ __ __ _  ___  _   _| | ___    | |__) | |           |
 |        | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \   |  ___/| |           |
 |        | |_\ \ (_| | | | (_| | (_) | |_| | |  __/   | |    | |__         |
 |         \____/\__,_|_|  \__, |\___/ \__, |_|\___|   |_|    |____|        |
 |                          __/ |       __/ |                               |
 |                         |___/       |___/                                |
 |                                                                          |
 |--------------------------------------------------------------------------|
 | Gargoyle PL version 1.15.0.2        | OpenWrt 23.05 branch               |
 | Gargoyle revision 172329f6          | OpenWrt commit 1292a49             |
 | Built June 17, 2025                 | Target  ipq807x/generic            |
 ----------------------------------------------------------------------------
 | Machine: Zyxel NBG7815                                                   |
 | Uptime: 0d, 00:27:46                                                     |
 | Load: 0.00 0.00 0.00                                                     |
 | Flash: total: 41.0MB, free: 37.5MB, used: 0%                             |
 | Memory: total: 868.6MB, free: 796.4MB, used: 8%                          |
 | Leases: 1                                                                |
 | lan: static, 192.168.20.251                                              |
 | wan: dhcp, ?                                                             |
 | wan6: none, ?                                                            |
 ----------------------------------------------------------------------------

Brak pliku /etc/config/wireless
Brak Wifi w gui, pod przyciskiem tylko opcja: Wyłączone.
W logu ze startu takie errory:

Tue Jan 28 08:37:06 2025 kern.warn kernel: [   13.871178] remoteproc remoteproc0: Direct firmware load for IPQ8074/q6_fw.mdt failed with error -2
Tue Jan 28 08:37:06 2025 kern.warn kernel: [   13.876158] remoteproc remoteproc0: Falling back to sysfs fallback for: IPQ8074/q6_fw.mdt
Tue Jan 28 08:37:06 2025 kern.err kernel: [   30.981551] remoteproc remoteproc0: request_firmware failed: -12
Tue Jan 28 08:37:06 2025 kern.err kernel: [   30.981599] ath11k c000000.wifi: failed to boot the remote processor Q6
Tue Jan 28 08:37:06 2025 kern.err kernel: [   30.986636] ath11k c000000.wifi: failed to power up :-12
Tue Jan 28 08:37:06 2025 kern.err kernel: [   31.068514] ath11k c000000.wifi: failed to create soc core: -12
Tue Jan 28 08:37:06 2025 kern.err kernel: [   31.068561] ath11k c000000.wifi: failed to init core: -12
Tue Jan 28 08:37:06 2025 kern.warn kernel: [   31.073527] ath11k: probe of c000000.wifi failed with error -12]
cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00050000 00010000 "0:sbl1"
mtd1: 00010000 00010000 "0:mibib"
mtd2: 00020000 00010000 "0:bootconfig"
mtd3: 00020000 00010000 "0:bootconfig1"
mtd4: 00180000 00010000 "0:qsee"
mtd5: 00180000 00010000 "0:qsee_1"
mtd6: 00010000 00010000 "0:devcfg"
mtd7: 00010000 00010000 "0:devcfg_1"
mtd8: 00010000 00010000 "0:apdp"
mtd9: 00010000 00010000 "0:apdp_1"
mtd10: 00040000 00010000 "0:rpm"
mtd11: 00040000 00010000 "0:rpm_1"
mtd12: 00010000 00010000 "0:cdt"
mtd13: 00010000 00010000 "0:cdt_1"
mtd14: 000c0000 00010000 "0:appsbl"
mtd15: 000c0000 00010000 "0:appsbl_1"
mtd16: 00010000 00010000 "0:appsblenv"
mtd17: 00040000 00010000 "0:art"
mtd18: 00080000 00010000 "0:ethphyfw"
mtd19: 00010000 00010000 "0:crt"
mtd20: 00010000 00010000 "dual_flag"
mtd21: 00110000 00010000 "reserved"

ls -la /etc/hotplug.d/firmware/
drwxrwxr-x    2 root     root            63 Jan 28 08:36 .
drwxr-xr-x   15 root     root           185 Jan 28 08:36 ..
-rw-rw-r--    1 root     root           804 Jan 28 08:36 11-ath11k-caldata
-rw-rw-r--    1 root     root           386 Jan 28 08:36 11_fix_wifi_mac
strings /dev/mtd6
fYe;
ABT_Propdata_oem
NOCError_Propdata_oem
CHIP_BUS_INDEX
BUS_PROTOCOL
IS_GPIO_PROTECTED
GPIO_NUMBERS
GPIO_RG_INDEX
SUBSYSTEM_ID
IS_PERSISTENT
CORE_RG_INDEX
QCOM_INTERNAL_ALTR_DEV_ID_1
NUM_PERIPH_BLSP_CORES
NUM_BLSP_QUP_CORES
NUM_BLSP_UART_CORES
BLSP1_BLSP_BAM_BASE
BLSP1_HCLK_NAME
QUP_CORE_NUM
QUP_BASE_ADDR
SW_ENABLE_BAM
BAM_BLSP_ID
BAM_BASE_ADDR
BAM_INTERRUPT_ID
BAM_TX_PIPE_NUM
BAM_RX_PIPE_NUM
is_multi_cs
gpio_spi_clk_str
gpio_spi_cs_str
gpio_spi_cs1_str
gpio_spi_cs2_str
gpio_spi_mosi_str
gpio_spi_miso_str
GpioClkConfig
GpioCsConfig
GpioMosiConfig
GpioMisoConfig
GpioCs1Config
GpioCs2Config
CHIP_APP_CLK_NAME
CHIP_HCLK_NAME
DalEnv
TargetCfg
disable_smmu_ac
disable_xpu_ac
OEM_sec_wdog_bark_time
OEM_sec_wdog_bite_time
OEM_kernel_code_region
OEM_kernel_code_size
OEM_pil_secure_app_load_region_start
OEM_pil_secure_app_load_region_size
OEM_pil_subsys_load_region_start
OEM_pil_subsys_load_region_size
OEM_MRC_activation_list
OEM_MRC_revocation_list
tz_enable_logs
license_data_store_path
disable_security_stream_check
get_IV_constraint
use_legacy_hdmi_hdcp_check
provision_constraint_flag
maximum_hdcp_2x_capability
enable_kcb_logging_flag
external_display_dsi_intf_num
block_content_thru_dsi
fpta_name
gk_timeout_config
fp_sensor_name
fp_sensor_version
enable_finger_id
enable_soter
mdtp_system_min_verify_ratio
mdtp_system_path_00
mdtp_system_path_01
mdtp_system_path_02
mdtp_system_path_03
mdtp_system_path_04
mdtp_system_path_05
mdtp_system_path_06
mdtp_system_path_07
mdtp_system_path_08
mdtp_system_path_09
hdcp1_storage_type
chamomile_ips
is_kdf_fix_enable
client_00
client_01
client_02
client_03
client_04
client_05
client_06
client_07
cmnlib_gppo_rpmb_enablement
cmnlib_gppo_root_path
kernel_version
kernel_version_str_length
challenges
challenges_array_length
proprietary_play_enabler_video_protect
proprietary_play_enabler_default_behaviour
IV_constraint
robustness_version
proprietary_play_enabler_profile
proprietary_opl_profile_0
hdcp2p2_storage_type
chamomile_ips_hdcp2p2
arb_priority_cfg
number_priorities
number_pvc_port
pvc_port_cfg
spmi_channel_cfg
spmi_channel_cfg_size
tz_mpu_rg_cfg
rg_cfg_size
pmic_arb_hal_id_xpu
spmi_rg_config
QFPROM_rail_id
QFPROM_rail_type
pam_qfprom_rail
pm_peripherals
blsp_spi_mosi[1]
blsp_spi_miso[1]
blsp_spi_cs_n[1]
blsp_spi_clk[1]
blsp_i2c_sda[1]
blsp_i2c_scl[1]
blsp_spi_mosi[2]
blsp_spi_miso[2]
blsp_spi_cs_n[2]
blsp_spi_clk[2]
blsp_i2c_sda[2]
blsp_i2c_scl[2]
blsp_spi_mosi[3]
blsp_spi_miso[3]
blsp_spi_cs_n[3]
blsp_spi_clk[3]
blsp_i2c_sda[3]
blsp_i2c_scl[3]
blsp_spi_mosi[4]
blsp_spi_miso[4]
blsp_spi_cs_n[4]
blsp_spi_clk[4]
blsp_i2c_sda[4]
blsp_i2c_scl[4]
blsp_spi_mosi[5]
blsp_spi_miso[5]
blsp_spi_cs_n[5]
blsp_spi_clk[5]
blsp_i2c_sda[5]
blsp_i2c_scl[5]
blsp_spi_mosi[6]
blsp_spi_miso[6]
blsp_spi_cs_n[6]
blsp_spi_clk[6]
blsp_i2c_sda[6]
blsp_i2c_scl[6]
blsp1_spi_cs1_n
blsp1_spi_cs2_n
blsp3_spi_cs1_n
blsp6_spi_cs2_n
blsp6_spi_cs1_n
blsp3_spi_cs2_n
blsp7_spi_cs1_n
blsp7_spi_cs2_n
blsp_spi_mosi[8]
blsp_spi_miso[8]
blsp_spi_cs_n[8]
blsp_spi_clk[8]
blsp_i2c_sda[8]
blsp_i2c_scl[8]
blsp_spi_clk[7]
blsp_spi_cs_n[7]
blsp_i2c_scl[7]
blsp_i2c_sda[7]
blsp_spi_mosi[7]
blsp_spi_miso[7]
tlmm_base
tlmm_offset
tlmm_total_gpio
tlmm_xpu
tlmm_xpu_protection
/dev/buses/qup/blsp_qup_3_alt1
gcc_blsp1_ahb_clk
blsp_spi_clk[1]
blsp_spi_cs_n[1]
blsp1_spi_cs1_n
blsp1_spi_cs2_n
blsp_spi_mosi[1]
blsp_spi_miso[1]
gcc_blsp1_qup1_spi_apps_clk
gcc_blsp1_ahb_clk
blsp_spi_clk[2]
blsp_spi_cs_n[2]
blsp_spi_mosi[2]
blsp_spi_miso[2]
gcc_blsp1_qup2_spi_apps_clk
blsp_spi_clk[3]
blsp_spi_cs_n[3]
blsp3_spi_cs2_n
blsp_spi_mosi[3]
blsp_spi_miso[3]
gcc_blsp1_qup3_spi_apps_clk
blsp_spi_clk[4]
blsp_spi_cs_n[4]
blsp_spi_mosi[4]
blsp_spi_miso[4]
gcc_blsp1_qup4_spi_apps_clk
blsp_spi_clk[5]
blsp_spi_cs_n[5]
blsp_spi_mosi[5]
blsp_spi_miso[5]
gcc_blsp2_qup1_spi_apps_clk
gcc_blsp2_ahb_clk
blsp_spi_clk[6]
blsp_spi_cs_n[6]
blsp_spi_mosi[6]
blsp_spi_miso[6]
blsp6_spi_cs1_n
blsp6_spi_cs2_n
gcc_blsp2_qup2_spi_apps_clk
blsp_spi_clk[7]
blsp_spi_cs_n[7]
blsp_spi_mosi[7]
blsp_spi_miso[7]
blsp7_spi_cs1_n
blsp7_spi_cs2_n
gcc_blsp2_qup3_spi_apps_clk
blsp_spi_clk[8]
blsp_spi_cs_n[8]
blsp_spi_mosi[8]
blsp_spi_miso[8]
gcc_blsp2_qup4_spi_apps_clk
"/data/misc/qsee/"
fingerprint
Stargate
"/system/build.prop"
"/system/default.prop"
"/system/app"
"/system/bin"
"/system/etc"
"/system/framework"
"/system/lib"
"/system/priv-app"
"/system/vendor"
"/system/xbin"
"fidocrypto"
"/persist/data/"
"Linux version 3.14.26-g43b1178-00038-g96ef344 (lnxbuild@abait242-sd-lnx) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 5 15:15:57 PDT 2015"
"/data/misc/qsee/"
ldoa
T=$*x
tB~wI
Prqe
OR,S
qD^Z
$0Fi
6<Id
        "Ql
/[P9-
8]f%W
&Dyyf
Nn?5
O[jeQ
X$=?
~Ws     5
_Y)o
~0Zu'<
CN|5
M:&1
9R:r
T'd*
Au((
h}>g
o`?!N
0n<Y
`qNA,
5{J)
Js;*
[ZW-
@('
64V_y
])x]H
50u<X/
jzd_%
]w=G@S
Qy`<
^]{F
Zbsp
8       tu0#
E)/;
h~M>g
\*w*
gEw8e
ped>}
4uHn
>_jJ.!S
%Adk
tB~wI
Prqe
OR,S
qD^Z
$0Fi
6<Id
        "Ql
/[P9-
8]f%W
&Dyyf
Nn?5
O[jeQ
X$=?
~Ws     5
_Y)o
~0Zu'<
CN|5
M:&1
9R:r
T'd*
Au((
h}>g
o`?!N
0n<Y
`qNA,
5{J)
Js;*
[ZW-
@('
64V_y
])x]H
50u<X/
jzd_%
]w=G@S
Qy`<
^]{F
Zbsp
8       tu0#
E)/;
h~M>g
\*w*
gEw8e
ped>}
4uHn
>_jJ.!S
/dev/ABTimeoutOEM
/dev/NOCErrorOEM
/dev/buses/qup/blsp_qup_1
/dev/buses/qup/blsp_qup_2
/dev/buses/qup/blsp_qup_3
/dev/buses/qup/blsp_qup_4
/dev/buses/uart/blsp_uart_1
/dev/buses/uart/blsp_uart_2
/dev/buses/qup/blsp_qup_5
/dev/buses/qup/blsp_qup_6
/dev/buses/qup/blsp_qup_7
/dev/buses/qup/blsp_qup_8
/dev/buses/uart/blsp_uart_3
/dev/buses/uart/blsp_uart_4
BLSP_GLOBAL_PROP
/dev/buses/spi_1
/dev/buses/spi_2
/dev/buses/spi_3
/dev/buses/spi_4
/dev/buses/spi_5
/dev/buses/spi_6
/dev/buses/spi_7
/dev/buses/spi_8
/ac/smmu
/ac/xpu
/tz/oem
widevine
keymaster
mdtp
hdcp1
/tz/oem/kdf_fix
chamomile
commonlib
dhsecapp
playread
qcom.tz.hdcp2p2
/pmic/periph
/tz/pmic
/tlmm/configs
PCNOC_0
PCNOC_1
PCNOC_2
PCNOC_3
PCNOC_4
PCNOC_5
PCNOC_6
PCNOC_7
PCNOC_8
PCNOC_9
SNOC_0
SNOC_3
SNOC_2
PCNOC
SNOC
MEMNOC
swen
lsmd
pcen
pcmd
bypa
corn
swen
lsmd
pcen
pcmd
bypa
corn
OEM_sec_wdog_bark_time
OEM_sec_wdog_bite_time
OEM_kernel_code_region
OEM_kernel_code_size
OEM_pil_secure_app_load_region_start
OEM_pil_secure_app_load_region_size
OEM_pil_subsys_load_region_start
OEM_pil_subsys_load_region_size
OEM_MRC_activation_list
OEM_MRC_revocation_list
tz_enable_logs
@ AE
/tz/oem

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: NBG7815 Gargoyle brak wifi

Nie widziałem takiego błędu. Wgraj czyste openwrt 23.05 i zobacz czy wifi działa. Jak nie to wgraj 24.10 i zobacz czy działa, bo to może kwestia samej wersji openwrt z jakiegoś powodu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez kafarowski

  • Zarejestrowany: 2017-05-27
  • Posty: 43

Odp: NBG7815 Gargoyle brak wifi

Dopiero teraz trafił się wolny czas. Ten Gargoyle 1.15.0.2 to gatunek inwazyjny. Próba wgrania 1.15.0.3 czy luci-24.10-snapshot-r28816-a65ca44cb7-qualcommax-ipq807x-zyxel_nbg7815-squashfs-sysupgrade.bin kończy się przywróceniem tego co było:

@Gargoyle:/# Watchdog handover: fd=3
- watchdog -
Watchdog did not previously reset the system
Tue Jan 28 08:42:41 CET 2025 upgrade: Sending TERM to remaining processes ...
Tue Jan 28 08:42:46 CET 2025 upgrade: Sending KILL to remaining processes ...
[  178.959218] stage2 (11169): drop_caches: 3
Tue Jan 28 08:42:52 CET 2025 upgrade: Switching to ramdisk...
Tue Jan 28 07:42:53 UTC 2025 upgrade: Performing system upgrade...
cut: standard output: Broken pipe
/lib/upgrade/do_stage2: line 38: losetup: not found
Failed to detach all loop devices. Skip this try.
[  180.324334] qcom_scm firmware:scm: No available mechanism for setting download mode
[  180.324433] reboot: Restarting system

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147
S - IMAGE_VARIANT_STRING=HAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002e1
B -       201 - PBL, Start
B -      2735 - bootable_media_detect_entry, Start
B -      2881 - bootable_media_detect_success, Start
B -      2886 - elf_loader_entry, Start
B -     11375 - auth_hash_seg_entry, Start
B -     11617 - auth_hash_seg_exit, Start
B -    250130 - elf_segs_hash_verify_entry, Start
B -    310648 - PBL, End
B -    478453 - SBL1, Start
B -    555405 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B -    565012 - pm_device_init, Start
B -    742461 - PM_SET_VAL:Skip
D -    175344 - pm_device_init, Delta
B -    744718 - pm_driver_init, Start
D -      5307 - pm_driver_init, Delta
B -    751184 - clock_init, Start
D -      2104 - clock_init, Delta
B -    755241 - boot_flash_init, Start
D -      3873 - boot_flash_init, Delta
B -    762866 - boot_config_data_table_init, Start
D -      1006 - boot_config_data_table_init, Delta - (575 Bytes)
B -    772778 - Boot Setting :  0x00000618
B -    776499 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:241
B -    783606 - sbl1_ddr_set_params, Start
B -    787327 - CPR configuration: 0x30c
B -    790804 - cpr_init, Start
B -    793671 - Rail:0 Mode: 5 Voltage: 800000
B -    798795 - CL CPR settled at 752000mV
B -    801601 - Rail:1 Mode: 5 Voltage: 880000
B -    805901 - Rail:1 Mode: 7 Voltage: 904000
D -     16439 - cpr_init, Delta
B -    812672 - Pre_DDR_clock_init, Start
B -    816698 - Pre_DDR_clock_init, End
B -    820084 - DDR Type : PCDDR3
B -    826153 - do ddr sanity test, Start
D -      1037 - do ddr sanity test, Delta
B -    830637 - DDR: Start of HAL DDR Boot Training
B -    835273 - DDR: End of HAL DDR Boot Training
B -    841037 - DDR: Checksum to be stored on flash is -364387610
B -    851346 - Image Load, Start
D -    335836 - QSEE Image Loaded, Delta - (1373936 Bytes)
B -   1187273 - Image Load, Start
D -        61 - SEC Image Loaded, Delta - (0 Bytes)
B -   1194929 - Image Load, Start
D -      9790 - DEVCFG Image Loaded, Delta - (26004 Bytes)
B -   1204811 - Image Load, Start
D -     30927 - RPM Image Loaded, Delta - (105964 Bytes)
B -   1235768 - Image Load, Start
D -    144631 - APPSBL Image Loaded, Delta - (588472 Bytes)
B -   1380521 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -   1386316 - USB D+ check, Start
D -         0 - USB D+ check, Delta
B -   1392721 - SBL1, End
D -    916586 - SBL1, Delta
S - Flash Throughput, 4428 KB/s  (2095623 Bytes,  473200 us)
S - DDR Frequency, 466 MHz
S - Core 0 Frequency, 1651 MHz


U-Boot 2016.01 (Jan 06 2020 - 08:24:12 +0000)

DRAM:  smem ram ptable found: ver: 1 len: 4
1 GiB
NAND:  Not an ONFI device
ONFI probe failed
ID = ffffffff
Vendor = ff
Device = ff
qpic_nand: unknown NAND device manufacturer: ff device: ff
U-Boot BUG at drivers/mtd/mtdcore.c:420!
SPI_ADDR_LEN=3
SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x800000
8 MiB
MMC:   <NULL>: 0
In:    serial@78B3000
Out:   serial@78B3000
Err:   serial@78B3000
machid: 80100f1
Setting bus to 0
Valid chip addresses: 40
Net:   MAC0 addr:d8:ec:e5:78:3e:38
PHY ID1: 0x4d
PHY ID2: 0xd0b1
PHY ID1: 0x4d
PHY ID2: 0xd101
SPI_ADDR_LEN=3
SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiB
device 0 offset 0x650000, size 0x80000
SF: 524288 bytes @ 0x650000 Read: OK
CRC check good on phy fw file (0x4B33)
PHYFW:Loading IRAM...........done.
PHYFW:Loading DRAM..............done.
phy fw image load good CRC-16 matches (0x6FFA)
PHY ID1: 0x31c3
PHY ID2: 0x1c12
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (7-7)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq807x_edma_alloc_rings: successfull
ipq807x_edma_setup_ring_resources: successfull
ipq807x_edma_configure_rings: successfull
ipq807x_edma_hw_init: successfull
eth0
SPI_ADDR_LEN=3
SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiB
device 0 offset 0x530000, size 0x10000
SF: 65536 bytes @ 0x530000 Read: OK
## Booting kernel from Legacy Image at 44000000 ...
   Image Name:   Zyxel zloader
   Image Type:   ARM U-Boot Standalone Program (gzip compressed)
   Data Size:    15340 Bytes = 15 KiB
   Load Address: 5f000000
   Entry Point:  5f00000c
   Verifying Checksum ... OK
   Uncompressing Standalone Program ... OK


Zyxel zloader v1.0.0 (2020-01-06 - 08:24)

Wrong header start magic


Multiboot clinent version: 2.0
ipq807x_eth_halt: done
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 up Speed :1000 Full duplex
eth0 PHY3 Down Speed :10 Half duplex
eth0 PHY4 Down Speed :10 Half duplex
10M speed not supported
ipq807x_eth_init: done

Hit any key to stop autoboot:  0ipq807x_eth_halt: done


*** Booting from system 1 ***

MMC read: dev # 0, block # 163874, count 12288 ... 12288 blocks read: OK
## Loading kernel from FIT Image at 44000000 ...
   Using 'config@nbg7815' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-5.15.173
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x440000ec
     Data Size:    4612670 Bytes = 4.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x41000000
     Entry Point:  0x41000000
     Hash algo:    crc32
     Hash value:   6674ab56
     Hash algo:    sha1
     Hash value:   d692ee9bbf38db1304c84019b466728bec6026f2
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
   Using 'config@nbg7815' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt zyxel_nbg7815 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x4446646c
     Data Size:    43833 Bytes = 42.8 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   a50cd2bb
     Hash algo:    sha1
     Hash value:   bb07377415471322e1f644058c9676b44f61ffff
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x4446646c
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 4a3f2000, end 4a3ffb38 ... OK
fdt-fixup: unable to find compatible node
Using machid 0x80100f1 from environment

Starting kernel ...

Jumping to AARCH64 kernel via monitor
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.173 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r0+24153-1292a493a6) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Jan 28 07:36:43 2025
[    0.000000] Machine model: Zyxel NBG7815
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff]
[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff]
[    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff]
[    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 18 pages/cpu s33432 r8192 d32104 u73728
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 888244K/1048576K available (7424K kernel code, 816K rwdata, 2104K rodata, 1216K init, 283K bss, 160332K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000115] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000132] pid_max: default: 32768 minimum: 301
[    0.000494] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.000512] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.002074] rcu: Hierarchical SRCU implementation.
[    0.002754] smp: Bringing up secondary CPUs ...
[    0.003362] Detected VIPT I-cache on CPU1
[    0.003430] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.004038] Detected VIPT I-cache on CPU2
[    0.004079] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.004660] Detected VIPT I-cache on CPU3
[    0.004697] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.004760] smp: Brought up 1 node, 4 CPUs
[    0.004786] SMP: Total of 4 processors activated.
[    0.004794] CPU features: detected: 32-bit EL0 Support
[    0.004801] CPU features: detected: CRC32 instructions
[    0.004857] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.004866] CPU: All CPU(s) started at EL1
[    0.004888] alternatives: patching kernel code
[    0.014720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014757] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.014940] pinctrl core: initialized pinctrl subsystem
[    0.016315] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.016822] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.016865] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.016901] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.017286] thermal_sys: Registered thermal governor 'step_wise'
[    0.018982] cpuidle: using governor menu
[    0.019201] ASID allocator initialised with 65536 entries
[    0.077115] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    0.086134] SCSI subsystem initialized
[    0.086329] usbcore: registered new interface driver usbfs
[    0.086386] usbcore: registered new interface driver hub
[    0.086433] usbcore: registered new device driver usb
[    0.086659] CPUidle PSCI: failed to enable OSI mode: -95
[    0.086980] qcom_scm: convention: smc arm 64
[    0.088445] clocksource: Switched to clocksource arch_sys_counter
[    0.089503] NET: Registered PF_INET protocol family
[    0.089643] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.090579] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.090607] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.090623] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.090710] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.090860] TCP: Hash tables configured (established 8192 bind 8192)
[    0.090954] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.090994] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.091185] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.091220] PCI: CLS 0 bytes, default 64
[    0.092430] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[    0.096004] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.096025] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.096851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.097914] qcom-qmp-phy 58000.phy: supply vdda-phy not found, using dummy regulator
[    0.098067] qcom-qmp-phy 58000.phy: supply vdda-pll not found, using dummy regulator
[    0.099186] qcom-qmp-phy 58000.phy: Registered Qcom-QMP phy
[    0.099456] qcom-qmp-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[    0.099575] qcom-qmp-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[    0.100542] qcom-qmp-phy 78000.phy: Registered Qcom-QMP phy
[    0.101444] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
[    0.101593] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[    0.101738] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[    0.101915] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[    0.102043] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[    0.102201] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[    0.106465] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
[    0.106491] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
[    0.110645] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.112683] msm_serial 78b1000.serial: msm_serial: detected port #1
[    0.112732] msm_serial 78b1000.serial: uartclk = 19200000
[    0.112781] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 24, base_baud = 1200000) is a MSM
[    0.113202] msm_serial 78b3000.serial: msm_serial: detected port #0
[    0.113247] msm_serial 78b3000.serial: uartclk = 3686400
[    0.113288] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 25, base_baud = 230400) is a MSM
[    0.113315] msm_serial: console setup on port #0
[    0.814413] printk: console [ttyMSM0] enabled
[    0.819590] msm_serial: driver initialized
[    0.827388] loop: module loaded
[    0.827463] Loading iSCSI transport class v2.0-870.
[    0.832069] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.836742] spi-nor spi0.0: w25q64dw (8192 Kbytes)
[    0.842764] 22 fixed-partitions partitions found on MTD device spi0.0
[    0.847852] Creating 22 MTD partitions on "spi0.0":
[    0.853650] 0x000000000000-0x000000050000 : "0:sbl1"
[    0.858792] 0x000000050000-0x000000060000 : "0:mibib"
[    0.863891] 0x000000060000-0x000000080000 : "0:bootconfig"
[    0.868876] 0x000000080000-0x0000000a0000 : "0:bootconfig1"
[    0.874207] 0x0000000a0000-0x000000220000 : "0:qsee"
[    0.879716] 0x000000220000-0x0000003a0000 : "0:qsee_1"
[    0.884879] 0x0000003a0000-0x0000003b0000 : "0:devcfg"
[    0.889855] 0x0000003b0000-0x0000003c0000 : "0:devcfg_1"
[    0.894977] 0x0000003c0000-0x0000003d0000 : "0:apdp"
[    0.900469] 0x0000003d0000-0x0000003e0000 : "0:apdp_1"
[    0.905395] 0x0000003e0000-0x000000420000 : "0:rpm"
[    0.910395] 0x000000420000-0x000000460000 : "0:rpm_1"
[    0.915156] 0x000000460000-0x000000470000 : "0:cdt"
[    0.920410] 0x000000470000-0x000000480000 : "0:cdt_1"
[    0.924956] 0x000000480000-0x000000540000 : "0:appsbl"
[    0.930276] 0x000000540000-0x000000600000 : "0:appsbl_1"
[    0.935268] 0x000000600000-0x000000610000 : "0:appsblenv"
[    0.940668] 0x000000610000-0x000000650000 : "0:art"
[    0.946056] 0x000000650000-0x0000006d0000 : "0:ethphyfw"
[    0.950698] 0x0000006d0000-0x0000006e0000 : "0:crt"
[    0.956258] 0x0000006e0000-0x0000006f0000 : "dual_flag"
[    0.960937] 0x0000006f0000-0x000000800000 : "reserved"
[    0.973651] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    0.976803] s1: supplied by regulator-dummy
[    0.978605] s2: supplied by regulator-dummy
[    0.982526] vdd_s3: supplied by regulator-dummy
[    0.986874] vdd_s4: supplied by regulator-dummy
[    0.991398] s5: supplied by regulator-dummy
[    0.995782] l1: supplied by regulator-dummy
[    0.999963] l2: supplied by regulator-dummy
[    1.004071] l3: supplied by regulator-dummy
[    1.008293] l4: supplied by regulator-dummy
[    1.012417] l5: supplied by regulator-dummy
[    1.016580] l6: supplied by regulator-dummy
[    1.020785] l7: supplied by regulator-dummy
[    1.024900] l8: supplied by regulator-dummy
[    1.029094] l9: supplied by regulator-dummy
[    1.033375] l11: supplied by regulator-dummy
[    1.037428] l12: supplied by regulator-dummy
[    1.041945] l13: supplied by regulator-dummy
[    1.061808] i2c_dev: i2c /dev entries driver
[    1.066965] sdhci: Secure Digital Host Controller Interface driver
[    1.067010] sdhci: Copyright(c) Pierre Ossman
[    1.072239] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.080239] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[    1.100113] NET: Registered PF_INET6 protocol family
[    1.100995] Segment Routing with IPv6
[    1.104180] In-situ OAM (IOAM) with IPv6
[    1.107760] NET: Registered PF_PACKET protocol family
[    1.108501] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
[    1.111769] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.124255] 8021q: 802.1Q VLAN Support v1.8
[    1.154205] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    1.154515] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[    1.160359] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[    1.166949] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[    1.174638] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[    1.182121] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[    1.191253] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
[    1.198193] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 824000 uV
[    1.208178] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 888000 uV
[    1.218001] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 968000 uV
[    1.227842] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 751, quot_offset[ 7]=   0
[    1.237605] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 975, quot_offset[ 7]= 220
[    1.248455] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1080, quot_offset[ 7]= 105
[    1.259392] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1219, quot_offset[ 7]= 135
[    1.270466] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[    1.273135] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
[    1.283637] mmc0: new HS200 MMC card at address 0001
[    1.289124] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[    1.299080] mmcblk0: mmc0:0001 M62704 3.53 GiB
[    1.304366] clk: Disabling unuse▒[    1.319090] mmcblk0boot0: mmc0:0001 M62704 2.00 MiB
[    1.319593] mmcblk0boot1: mmc0:0001 M62704 2.00 MiB
[    1.323340] mmcblk0rpmb: mmc0:0001 M62704 512 KiB, chardev (246:0)
[    1.330274] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.
[    1.334473] Freeing unused kernel memory: 1216K
[    1.341435] Run /sbin/init as init process
[    1.431232] init: Console is alive
[    1.431350] init: - watchdog -
[    2.054223] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.070872] hwmon hwmon0: temp1_input not attached to any thermal zone
[    2.074022] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.152326] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
[    2.152421] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
[    2.158826] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
[    2.164787] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
[    2.172084] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
[    2.179561] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0
[    2.186224] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xf
[    2.191699] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xd
[    2.197609] ssdk_dt_parse_phy_info[716]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT
[    2.203277] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
[    2.210369] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC d8:ec:e5:78:3e:38
[    2.216409] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC d8:ec:e5:78:3e:38
[    2.222922] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC d8:ec:e5:78:3e:38
[    2.229433] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC d8:ec:e5:78:3e:38
[    2.235907] ssdk_dt_parse_intf_mac[942]:INFO:dp5 MAC d8:ec:e5:78:3e:39
[    2.242362] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
[    2.369761] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
[    2.370898] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
[    2.379876] aquantia_phy_api_ops_init[2241]:INFO:qca probe aquantia phy driver succeeded!
[    2.384354] qca808x_phy_api_ops_init[2566]:INFO:qca probe qca808x phy driver succeeded!
[    2.393101] regi_init[3953]:INFO:Initializing HPPE!!
[    2.638446] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
[    2.641942] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
[    4.138579] ssdk_switch_register[2017]:INFO:Chip version 0x1500
[    4.138612] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
[    4.143302] ssdk_switch_register[2043]:INFO:polling is selected
[    4.151645] regi_init[3957]:INFO:Initializing HPPE Done!!
[    4.157373] ssdk_genl_init[211]:INFO:ssdk genl family register success.
[    4.162842] regi_init[4020]:INFO:qca-ssdk module init succeeded!
[    4.171481] EDMA ver 1 hw init
[    4.175719] EDMA HW Reset completed succesfully
[    4.178400] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[    4.182809] RxDesc:1 (15-15) RxFill:1 (7-7)
[    4.188601] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
[    4.192809] nss-dp 3a001000.dp1 lan1: Registered netdev lan1(qcom-id:1)
[    4.202246] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[    4.208898] nss-dp 3a001200.dp2 lan2: Registered netdev lan2(qcom-id:2)
[    4.218376] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[    4.224989] nss-dp 3a001400.dp3 lan3: Registered netdev lan3(qcom-id:3)
[    4.234519] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[    4.241106] nss-dp 3a001600.dp4 lan4: Registered netdev lan4(qcom-id:4)
[    4.451143] QCA808X ethernet 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
[    4.451696] nss-dp 3a001800.dp5 wan: Registered netdev wan(qcom-id:5)
[    4.460591] Aquantia AQR113C 90000.mdio-1:08: FW 5.4, Build 4, Provisioning 1
[    4.468484] Aquantia AQR113C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL)
[    4.474210] nss-dp 3a007000.dp6-syn 10g: Registered netdev 10g(qcom-id:6)
[    4.483768] **********************************************************
[    4.490427] * NSS Data Plane driver
[    4.496833] **********************************************************
[    4.501431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.507518] fsl-ehci: Freescale EHCI Host controller driver
[    4.514088] ehci-platform: EHCI generic platform driver
[    4.524561] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.525114] ohci-platform: OHCI generic platform driver
[    4.541662] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.541709] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    4.546175] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002010010
[    4.553682] xhci-hcd xhci-hcd.1.auto: irq 93, io mem 0x08a00000
[    4.563071] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.568881] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    4.574435] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    4.582533] hub 1-0:1.0: USB hub found
[    4.588603] hub 1-0:1.0: 1 port detected
[    4.592537] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.596641] hub 2-0:1.0: USB hub found
[    4.604497] hub 2-0:1.0: 1 port detected
[    4.608327] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.612234] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    4.617526] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002010010
[    4.625001] xhci-hcd xhci-hcd.2.auto: irq 94, io mem 0x08c00000
[    4.634425] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.640234] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    4.645790] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[    4.653721] hub 3-0:1.0: USB hub found
[    4.660013] hub 3-0:1.0: 1 port detected
[    4.663938] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.668000] hub 4-0:1.0: USB hub found
[    4.675844] hub 4-0:1.0: 1 port detected
[    4.682949] usbcore: registered new interface driver usb-storage
[    4.684499] usbcore: registered new interface driver uas
[    4.689702] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.698134] init: - preinit -
[    4.868307] random: jshn: uninitialized urandom read (4 bytes read)
[    4.880813] random: jshn: uninitialized urandom read (4 bytes read)
[    4.888978] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    7.014288] mount_root: loading kmods from internal overlay
[    7.029498] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    7.030463] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    8.046881] block: attempting to load /etc/config/fstab
[    8.049486] block: unable to load configuration (fstab: Entry not found)
[    8.050934] block: no usable configuration
[    8.058487] loop0: detected capacity change from 0 to 122880
[    8.148452] loop0: detected capacity change from 122880 to 100608
[    8.159527] random: procd: uninitialized urandom read (4 bytes read)
[    8.163387] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    8.358460] random: crng init done
[    8.358493] random: 2 urandom warning(s) missed due to ratelimiting
[    9.109198] block: attempting to load /etc/config/fstab
[    9.109271] block: unable to load configuration (fstab: Entry not found)
[    9.113246] block: no usable configuration
[    9.120816] mount_root: switching to ext4 overlay
[    9.127277] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[    9.130617] urandom-seed: Seeding with /etc/urandom.seed
[    9.161296] procd: - early -
[    9.161378] procd: - watchdog -
/etc/init.d/mjpg-streamer: device '/dev/video0' does not exist
Failed to connect to ubus
Failed to connect to ubus
[    9.706301] procd: - watchdog -
[    9.707043] procd: - ubus -
[    9.761603] procd: - init -
Please press Enter to activate this console.
[    9.936846] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.974178] NET: Registered PF_ALG protocol family
[    9.984874] Key type dns_resolver registered
[    9.992706] RPC: Registered named UNIX socket transport module.
[    9.992743] RPC: Registered udp transport module.
[    9.997431] RPC: Registered tcp transport module.
[   10.002313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.009811] tun: Universal TUN/TAP device driver, 1.6
[   10.034312] NFS: Registering the id_resolver key type
[   10.034369] Key type id_resolver registered
[   10.036034] urngd: v1.0.2 started.
[   10.038346] Key type id_legacy registered
[   10.057620] videodev: Linux video capture interface: v2.00
[   10.060000] hid: raw HID events driver (C) Jiri Kosina
[   10.065197] GACT probability on
[   10.067679] Mirror/redirect action on
[   10.073638] u32 classifier
[   10.073976]     input device check on
[   10.076581]     Actions configured
[   10.090163] Simple TC action Loaded
[   10.097077] ntfs3: Enabled Linux POSIX ACLs support
[   10.102734] Bluetooth: Core ver 2.22
[   10.102863] NET: Registered PF_BLUETOOTH protocol family
[   10.105384] Bluetooth: HCI device and connection manager initialized
[   10.110751] Bluetooth: HCI socket layer initialized
[   10.117017] Bluetooth: L2CAP socket layer initialized
[   10.121632] Bluetooth: SCO socket layer initialized
[   10.127737] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.131524] Bluetooth: BNEP filters: protocol multicast
[   10.137077] Bluetooth: BNEP socket layer initialized
[   10.144767] usbcore: registered new interface driver btusb
[   10.147961] usbcore: registered new interface driver cdc_acm
[   10.152537] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   10.159142] usbcore: registered new interface driver cdc_wdm
[   10.166591] Loading modules backported from Linux version v6.1.110-0-g5f55cad62cc9d
[   10.171981] Backport generated by backports.git v6.1.110-1-0-g965f73fc
[   10.180172] Bluetooth: HCI UART driver ver 2.3
[   10.185940] Bluetooth: HCI UART protocol H4 registered
[   10.190375] Bluetooth: HCI UART protocol BCSP registered
[   10.195487] Bluetooth: HCI UART protocol ATH3K registered
[   10.201810] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   10.206265] Bluetooth: HIDP socket layer initialized
[   10.212595] usbcore: registered new interface driver ipheth
[   10.260436] NET: Registered PF_QIPCRTR protocol family
[   10.263259] Bluetooth: RFCOMM TTY layer initialized
[   10.264480] Bluetooth: RFCOMM socket layer initialized
[   10.269286] Bluetooth: RFCOMM ver 1.11
[   10.279354] usbcore: registered new interface driver ums-alauda
[   10.280345] usbcore: registered new interface driver ums-cypress
[   10.285112] usbcore: registered new interface driver ums-datafab
[   10.291524] usbcore: registered new interface driver ums-freecom
[   10.297205] usbcore: registered new interface driver ums-isd200
[   10.303364] usbcore: registered new interface driver ums-jumpshot
[   10.308860] usbcore: registered new interface driver ums-karma
[   10.315263] usbcore: registered new interface driver ums-sddr09
[   10.321051] usbcore: registered new interface driver ums-sddr55
[   10.326740] usbcore: registered new interface driver ums-usbat
[   10.332384] usbcore: registered new interface driver usblp
[   10.341363] usbcore: registered new interface driver usbserial_generic
[   10.343049] usbserial: USB Serial support registered for generic
[   10.361957] xt_time: kernel timezone is -0000
[   10.363337] usbcore: registered new interface driver cdc_ether
[   10.367160] usbcore: registered new interface driver cdc_ncm
[   10.385397] gspca_main: v2.14.0 registered
[   10.386557] usbcore: registered new interface driver ov534
[   10.389819] usbcore: registered new interface driver gspca_zc3xx
[   10.394739] usbcore: registered new interface driver huawei_cdc_ncm
[   10.422264] PPP generic driver version 2.4.2
[   10.423604] NET: Registered PF_PPPOX protocol family
[   10.426850] usbcore: registered new interface driver qmi_wwan
[   10.432194] usbcore: registered new interface driver rndis_host
[   10.437197] usbcore: registered new interface driver sierra
[   10.442057] usbserial: USB Serial support registered for Sierra USB modem
[   10.448628] usbcore: registered new interface driver sierra_net
[   10.459295] usbcore: registered new interface driver uvcvideo
[   10.462260] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   10.466065] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   10.489063] ath11k c000000.wifi: ipq8074 hw2.0
[   10.489104] ath11k c000000.wifi: FW memory mode: 0
[   10.492778] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[   10.498789] remoteproc remoteproc0: Direct firmware load for IPQ8074/q6_fw.mdt failed with error -2
[   10.503359] remoteproc remoteproc0: Falling back to sysfs fallback for: IPQ8074/q6_fw.mdt
[   13.656721] EXT4-fs (mmcblk0p10): recovery complete
[   13.656762] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   13.742199] EXT4-fs (mmcblk0p11): recovery complete
[   13.742241] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   16.276837] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   16.360780] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   19.865742] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   19.947462] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   21.543782] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   21.628039] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   25.129531] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   25.212355] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   27.759936] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   27.841569] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   29.437462] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   29.518715] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   32.075263] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   32.159014] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   35.655211] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   35.735725] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   37.336044] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   37.421265] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   40.924961] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   41.008173] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   43.549384] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   43.631513] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   46.178130] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   46.264530] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   48.796269] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   48.883843] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   50.474576] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   50.559440] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   55.000472] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   55.082298] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   56.681118] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   56.761673] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   59.297490] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   59.377350] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   61.927868] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   62.010568] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   63.604206] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   63.689867] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   67.178759] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   67.261012] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   68.857606] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   68.942184] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   69.068279] remoteproc remoteproc0: request_firmware failed: -12
[   69.068327] ath11k c000000.wifi: failed to boot the remote processor Q6
[   69.073481] ath11k c000000.wifi: failed to power up :-12
[   69.138528] ath11k c000000.wifi: failed to create soc core: -12
[   69.138575] ath11k c000000.wifi: failed to init core: -12
[   69.143594] ath11k: probe of c000000.wifi failed with error -12
[   69.153260] usbcore: registered new interface driver cdc_mbim
[   69.155516] usbcore: registered new interface driver option
[   69.160498] usbserial: USB Serial support registered for GSM modem (1-port)
[   69.168357] usbcore: registered new interface driver qcserial
[   69.172825] usbserial: USB Serial support registered for Qualcomm USB modem
[   69.178939] kmodloader: done loading kernel modules from /etc/modules.d/*
[   74.855991] br-lan: port 1(lan1) entered blocking state
[   74.856034] br-lan: port 1(lan1) entered disabled state
[   74.860348] device lan1 entered promiscuous mode
[   74.873235] br-lan: port 2(lan2) entered blocking state
[   74.873279] br-lan: port 2(lan2) entered disabled state
[   74.877471] device lan2 entered promiscuous mode
[   74.885281] br-lan: port 3(lan3) entered blocking state
[   74.887350] br-lan: port 3(lan3) entered disabled state
[   74.892517] device lan3 entered promiscuous mode
[   74.900521] br-lan: port 4(lan4) entered blocking state
[   74.902365] br-lan: port 4(lan4) entered disabled state
[   74.907524] device lan4 entered promiscuous mode
[   74.919537] br-lan: port 5(10g) entered blocking state
[   74.919581] br-lan: port 5(10g) entered disabled state
[   74.923835] device 10g entered promiscuous mode
[   76.066580] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   76.158857] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[   78.009401] nss-dp 3a001400.dp3 lan3: PHY Link up speed: 1000
[   78.009462] br-lan: port 3(lan3) entered blocking state
[   78.014142] br-lan: port 3(lan3) entered forwarding state
[   78.019476] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,230

Odp: NBG7815 Gargoyle brak wifi

/lib/upgrade/do_stage2: line 38: losetup: not found

Zainstaluj sobie losetup i co mu tam jeszczde będzie potrzebne. Aktualizacji nie robi bo narzędzi obraz nie ma.

To skutek używania starych wersji i problemów które zostały rozwiązane już dawno w aktualnych wersjach.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez kafarowski

  • Zarejestrowany: 2017-05-27
  • Posty: 43

Odp: NBG7815 Gargoyle brak wifi

Dziękuję, ruszyło - a mawiali wykładowcy 20 lat temu - patrz i zobacz...ale czy wstawali przed 4 do roboty i kładli się o północy...
Router kupiłem początku czerwca z jakiegoś outletu, zafoliowany fabrycznie był. Poszedł tutorial ze strony openwrt i potem od razu Twój soft który był dostępny. Działało wszystko fajnie aż pewnego dnia zaczął rozłączać urządzenia wifi, gubił DNS - w logach nic nie znalazłem co mógłbym zrozumieć, potem pojawił się wspomniany Gargoyle to dlaczego nie spróbować - brak Wifi, poszedł temat i od razu tak się zachowywał przy próbie zmiany softu. Gdyby tam było miejsce na wysokość to wleciałby Linksys 8500 ale nie wlezie, kłaść go na boku ??? ktoś go zaprojektował żeby ciepło konwekcyjnie w górę szło. Dam mu drugą szanse, jak to samo to musi być fizycznie ciapnięty.

@Gargoyle:/# opkg list | grep losetup
losetup - 2.39-2 - losetup is used to associate loop devices with regular files or block devices,
@Gargoyle:/# opkg install losetup
Preparing to install the following packages, which will require 46946 bytes:
        losetup

Preparing to install package losetup...
        Downloading...
        Downloaded losetup successfully.
        Installing losetup...
        Successfully installed losetup.
Installation of packages successful.

@Gargoyle:/# Watchdog handover: fd=3
- watchdog -
Watchdog did not previously reset the system
Mon Sep 15 19:14:31 CEST 2025 upgrade: Sending TERM to remaining processes ...
Mon Sep 15 19:14:35 CEST 2025 upgrade: Sending KILL to remaining processes ...
[  338.993043] stage2 (12282): drop_caches: 3
Mon Sep 15 19:14:41 CEST 2025 upgrade: Switching to ramdisk...
Mon Sep 15 17:14:43 UTC 2025 upgrade: Performing system upgrade...
flashing kernel to /dev/mmcblk0p7
flashing rootfs to /dev/mmcblk0p8
[  341.003013] loop0: detected capacity change from 0 to 101888
Format new rootfs_data at position 10747904.
mke2fs 1.47.0 (5-Feb-2023)
Creating filesystem with 50944 1k blocks and 12712 inodes
Filesystem UUID: c061db87-6fda-49b9-8ea8-f880925eb74c
Superblock backups stored on blocks:
        8193, 24577, 40961

Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

[  341.915020] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
Saving config to rootfs_data at position 10747904.
cp: can't stat '': No such file or directory
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[  342.125027] qcom_scm firmware:scm: No available mechanism for setting download mode
[  342.125126] reboot: Restarting system

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147
S - IMAGE_VARIANT_STRING=HAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002e1
B -       201 - PBL, Start
B -      2738 - bootable_media_detect_entry, Start
B -      2884 - bootable_media_detect_success, Start
B -      2889 - elf_loader_entry, Start
B -     11378 - auth_hash_seg_entry, Start
B -     11622 - auth_hash_seg_exit, Start
B -    250136 - elf_segs_hash_verify_entry, Start
B -    310655 - PBL, End
B -    475037 - SBL1, Start
B -    551440 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B -    560956 - pm_device_init, Start
B -    736727 - PM_SET_VAL:Skip
D -    173819 - pm_device_init, Delta
B -    738984 - pm_driver_init, Start
D -      5307 - pm_driver_init, Delta
B -    745511 - clock_init, Start
D -      2104 - clock_init, Delta
B -    749537 - boot_flash_init, Start
D -      3873 - boot_flash_init, Delta
B -    757071 - boot_config_data_table_init, Start
D -      1006 - boot_config_data_table_init, Delta - (575 Bytes)
B -    766983 - Boot Setting :  0x00000618
B -    770796 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:241
B -    777811 - sbl1_ddr_set_params, Start
B -    781654 - CPR configuration: 0x30c
B -    785100 - cpr_init, Start
B -    787876 - Rail:0 Mode: 5 Voltage: 800000
B -    793091 - CL CPR settled at 752000mV
B -    795928 - Rail:1 Mode: 5 Voltage: 880000
B -    800106 - Rail:1 Mode: 7 Voltage: 904000
D -     16531 - cpr_init, Delta
B -    806999 - Pre_DDR_clock_init, Start
B -    810995 - Pre_DDR_clock_init, End
B -    814289 - DDR Type : PCDDR3
B -    820053 - do ddr sanity test, Start
D -      1037 - do ddr sanity test, Delta
B -    824903 - DDR: Start of HAL DDR Boot Training
B -    829539 - DDR: End of HAL DDR Boot Training
B -    835303 - DDR: Checksum to be stored on flash is -364387610
B -    845612 - Image Load, Start
D -    335836 - QSEE Image Loaded, Delta - (1373936 Bytes)
B -   1181539 - Image Load, Start
D -        61 - SEC Image Loaded, Delta - (0 Bytes)
B -   1189225 - Image Load, Start
D -      9760 - DEVCFG Image Loaded, Delta - (26004 Bytes)
B -   1199077 - Image Load, Start
D -     30896 - RPM Image Loaded, Delta - (105964 Bytes)
B -   1230065 - Image Load, Start
D -    144631 - APPSBL Image Loaded, Delta - (588472 Bytes)
B -   1374818 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -   1380643 - USB D+ check, Start
D -         0 - USB D+ check, Delta
B -   1387018 - SBL1, End
D -    914299 - SBL1, Delta
S - Flash Throughput, 4428 KB/s  (2095623 Bytes,  473171 us)
S - DDR Frequency, 466 MHz
S - Core 0 Frequency, 1651 MHz


U-Boot 2016.01 (Jan 06 2020 - 08:24:12 +0000)

DRAM:  smem ram ptable found: ver: 1 len: 4
1 GiB
NAND:  Not an ONFI device
ONFI probe failed
ID = ffffffff
Vendor = ff
Device = ff
qpic_nand: unknown NAND device manufacturer: ff device: ff
U-Boot BUG at drivers/mtd/mtdcore.c:420!
SPI_ADDR_LEN=3
SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x800000
8 MiB
MMC:   <NULL>: 0
In:    serial@78B3000
Out:   serial@78B3000
Err:   serial@78B3000
machid: 80100f1
Setting bus to 0
Valid chip addresses: 40
Net:   MAC0 addr:d8:ec:e5:78:3e:38
PHY ID1: 0x4d
PHY ID2: 0xd0b1
PHY ID1: 0x4d
PHY ID2: 0xd101
SPI_ADDR_LEN=3
SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiB
device 0 offset 0x650000, size 0x80000
SF: 524288 bytes @ 0x650000 Read: OK
CRC check good on phy fw file (0x4B33)
PHYFW:Loading IRAM...........done.
PHYFW:Loading DRAM..............done.
phy fw image load good CRC-16 matches (0x6FFA)
PHY ID1: 0x31c3
PHY ID2: 0x1c12
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (7-7)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq807x_edma_alloc_rings: successfull
ipq807x_edma_setup_ring_resources: successfull
ipq807x_edma_configure_rings: successfull
ipq807x_edma_hw_init: successfull
eth0
SPI_ADDR_LEN=3
SF: Detected W25Q64DW with page size 256 Bytes, erase size 4 KiB, total 8 MiB
device 0 offset 0x530000, size 0x10000
SF: 65536 bytes @ 0x530000 Read: OK
## Booting kernel from Legacy Image at 44000000 ...
   Image Name:   Zyxel zloader
   Image Type:   ARM U-Boot Standalone Program (gzip compressed)
   Data Size:    15340 Bytes = 15 KiB
   Load Address: 5f000000
   Entry Point:  5f00000c
   Verifying Checksum ... OK
   Uncompressing Standalone Program ... OK


Zyxel zloader v1.0.0 (2020-01-06 - 08:24)

Wrong header start magic


Multiboot clinent version: 2.0
ipq807x_eth_halt: done
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 up Speed :1000 Full duplex
eth0 PHY3 Down Speed :10 Half duplex
eth0 PHY4 up Speed :1000 Full duplex
10M speed not supported
ipq807x_eth_init: done

Hit any key to stop autoboot:  0ipq807x_eth_halt: done


*** Booting from system 1 ***

MMC read: dev # 0, block # 163874, count 12288 ... 12288 blocks read: OK
## Loading kernel from FIT Image at 44000000 ...
   Using 'config@nbg7815' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.102
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x440000e8
     Data Size:    5137486 Bytes = 4.9 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x41000000
     Entry Point:  0x41000000
     Hash algo:    crc32
     Hash value:   a0a40c1a
     Hash algo:    sha1
     Hash value:   822877a3675aa7929cda204048cdce3c50ee1078
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
   Using 'config@nbg7815' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt zyxel_nbg7815 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x444e6678
     Data Size:    46114 Bytes = 45 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   400ee518
     Hash algo:    sha1
     Hash value:   40decf7c9ab80ff714248c1406402d08ad5a5ea3
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x444e6678
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 4a3f1000, end 4a3ff421 ... OK
fdt-fixup: unable to find compatible node
Using machid 0x80100f1 from environment

Starting kernel ...

Jumping to AARCH64 kernel via monitor
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.6.102 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Aug 28 19:17:44 2025
[    0.000000] Machine model: Zyxel NBG7815
[    0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000
[    0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000
[    0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000
[    0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000
[    0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
[    0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000
[    0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000
[    0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000
[    0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff]
[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff]
[    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff]
[    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[    0.000000] percpu: Embedded 18 pages/cpu s36200 r8192 d29336 u73728
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB)
[    0.000000] Memory: 885908K/1048576K available (8640K kernel code, 922K rwdata, 1660K rodata, 1600K init, 293K bss, 162668K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: 0xffffffc080010000
[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000110] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000124] pid_max: default: 32768 minimum: 301
[    0.005080] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.005094] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.009370] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.009601] rcu: Hierarchical SRCU implementation.
[    0.009605] rcu:     Max phase no-delay instances is 1000.
[    0.010525] smp: Bringing up secondary CPUs ...
[    0.011194] Detected VIPT I-cache on CPU1
[    0.011302] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.011984] Detected VIPT I-cache on CPU2
[    0.012056] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.012711] Detected VIPT I-cache on CPU3
[    0.012778] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.012848] smp: Brought up 1 node, 4 CPUs
[    0.012856] SMP: Total of 4 processors activated.
[    0.012861] CPU features: detected: 32-bit EL0 Support
[    0.012866] CPU features: detected: CRC32 instructions
[    0.012927] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.012933] CPU: All CPU(s) started at EL1
[    0.012935] alternatives: applying system-wide alternatives
[    0.023364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.023391] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.025113] pinctrl core: initialized pinctrl subsystem
[    0.027201] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.027777] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.027815] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.027849] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.028267] thermal_sys: Registered thermal governor 'step_wise'
[    0.028328] cpuidle: using governor menu
[    0.028518] ASID allocator initialised with 65536 entries
[    0.086042] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    0.088204] Modules: 29440 pages in range for non-PLT usage
[    0.088211] Modules: 520960 pages in range for PLT usage
[    0.091895] SCSI subsystem initialized
[    0.092120] usbcore: registered new interface driver usbfs
[    0.092161] usbcore: registered new interface driver hub
[    0.092212] usbcore: registered new device driver usb
[    0.092668] qcom_scm: convention: smc arm 64
[    0.094429] clocksource: Switched to clocksource arch_sys_counter
[    0.098334] NET: Registered PF_INET protocol family
[    0.098502] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.101379] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.101404] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.101419] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.101505] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.101781] TCP: Hash tables configured (established 8192 bind 8192)
[    0.102294] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[    0.102478] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.102516] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.102828] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.102868] PCI: CLS 0 bytes, default 64
[    0.104750] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.105502] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.105509] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.109351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.112119] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator
[    0.112261] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator
[    0.113739] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[    0.113879] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[    0.115774] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator
[    0.115907] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
[    0.115949] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[    0.116131] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[    0.116365] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
[    0.116497] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[    0.116571] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[    0.116738] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[    0.127413] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.131522] msm_serial 78b1000.serial: msm_serial: detected port #1
[    0.131567] msm_serial 78b1000.serial: uartclk = 19200000
[    0.131913] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM
[    0.132403] msm_serial 78b3000.serial: msm_serial: detected port #0
[    0.132437] msm_serial 78b3000.serial: uartclk = 3686400
[    0.132770] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM
[    0.132804] msm_serial: console setup on port #0
[    0.132845] printk: console [ttyMSM0] enabled
[    0.987097] msm_serial: driver initialized
[    0.996837] loop: module loaded
[    0.998190] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.000453] spi-nor spi0.0: w25q64dw (8192 Kbytes)
[    1.006648] 22 fixed-partitions partitions found on MTD device spi0.0
[    1.011077] Creating 22 MTD partitions on "spi0.0":
[    1.017302] 0x000000000000-0x000000050000 : "0:sbl1"
[    1.022438] 0x000000050000-0x000000060000 : "0:mibib"
[    1.027631] 0x000000060000-0x000000080000 : "0:bootconfig"
[    1.032491] 0x000000080000-0x0000000a0000 : "0:bootconfig1"
[    1.037910] 0x0000000a0000-0x000000220000 : "0:qsee"
[    1.043374] 0x000000220000-0x0000003a0000 : "0:qsee_1"
[    1.048588] 0x0000003a0000-0x0000003b0000 : "0:devcfg"
[    1.053554] 0x0000003b0000-0x0000003c0000 : "0:devcfg_1"
[    1.058674] 0x0000003c0000-0x0000003d0000 : "0:apdp"
[    1.064148] 0x0000003d0000-0x0000003e0000 : "0:apdp_1"
[    1.069143] 0x0000003e0000-0x000000420000 : "0:rpm"
[    1.074019] 0x000000420000-0x000000460000 : "0:rpm_1"
[    1.078818] 0x000000460000-0x000000470000 : "0:cdt"
[    1.084039] 0x000000470000-0x000000480000 : "0:cdt_1"
[    1.088841] 0x000000480000-0x000000540000 : "0:appsbl"
[    1.093875] 0x000000540000-0x000000600000 : "0:appsbl_1"
[    1.098938] 0x000000600000-0x000000610000 : "0:appsblenv"
[    1.104291] 0x000000610000-0x000000650000 : "0:art"
[    1.109713] 0x000000650000-0x0000006d0000 : "0:ethphyfw"
[    1.114785] 0x0000006d0000-0x0000006e0000 : "0:crt"
[    1.120047] 0x0000006e0000-0x0000006f0000 : "dual_flag"
[    1.124672] 0x0000006f0000-0x000000800000 : "reserved"
[    1.138471] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    1.198226] i2c_dev: i2c /dev entries driver
[    1.206118] sdhci: Secure Digital Host Controller Interface driver
[    1.206166] sdhci: Copyright(c) Pierre Ossman
[    1.211200] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.217820] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[    1.240799] NET: Registered PF_INET6 protocol family
[    1.242090] Segment Routing with IPv6
[    1.244959] In-situ OAM (IOAM) with IPv6
[    1.248460] NET: Registered PF_PACKET protocol family
[    1.252435] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.252770] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
[    1.257622] 8021q: 802.1Q VLAN Support v1.8
[    1.309975] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    1.310415] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[    1.316126] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[    1.322702] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[    1.330387] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[    1.337912] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[    1.347014] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
[    1.353956] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 824000 uV
[    1.363944] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 888000 uV
[    1.373754] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 968000 uV
[    1.383611] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 751, quot_offset[ 7]=   0
[    1.393375] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 975, quot_offset[ 7]= 220
[    1.404225] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1080, quot_offset[ 7]= 105
[    1.415162] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1219, quot_offset[ 7]= 135
[    1.426338] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[    1.429559] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[    1.439603] mmc0: new HS200 MMC card at address 0001
[    1.446249] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[    1.455192] mmcblk0: mmc0:0001 M62704 3.53 GiB
[    1.460103] clk: Disabling unuse▒[    1.474863] mmcblk0boot0: mmc0:0001 M62704 2.00 MiB
[    1.475376] mmcblk0boot1: mmc0:0001 M62704 2.00 MiB
[    1.478796] mmcblk0rpmb: mmc0:0001 M62704 512 KiB, chardev (246:0)
[    1.485395] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.
[    1.490163] Freeing unused kernel memory: 1600K
[    1.497034] Run /sbin/init as init process
[    1.596682] init: Console is alive
[    1.596811] init: - watchdog -
[    2.070348] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.084044] hwmon hwmon0: temp1_input not attached to any thermal zone
[    2.106973] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    2.131111] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist
[    2.197685] aquantia_phy_api_ops_init[1485]:INFO:qca probe aquantia phy driver succeeded!
[    4.074515] regi_init[2525]:INFO:Initializing HPPE Done!!
[    4.074672] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[    4.081161] EDMA ver 1 hw init
[    4.085231] EDMA HW Reset completed succesfully
[    4.087873] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[    4.092268] RxDesc:1 (15-15) RxFill:1 (7-7)
[    4.097901] dp1: ppe offload disabled: 0 for macid 1
[    4.101643] dp1: Switch attached to macid 1 status: 0
[    4.305224] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
[    4.306205] dp2: ppe offload disabled: 0 for macid 2
[    4.314116] dp2: Switch attached to macid 2 status: 0
[    4.404785] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[    4.405948] dp3: ppe offload disabled: 0 for macid 3
[    4.413681] dp3: Switch attached to macid 3 status: 0
[    4.494759] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[    4.495778] dp4: ppe offload disabled: 0 for macid 4
[    4.503651] dp4: Switch attached to macid 4 status: 0
[    4.584786] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[    4.585756] dp5: ppe offload disabled: 0 for macid 5
[    4.593695] dp5: Switch attached to macid 5 status: 0
[    4.696642] Qualcomm QCA8081 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
[    4.697904] dp6-syn: ppe offload disabled: 0 for macid 6
[    4.705548] dp6-syn: Switch attached to macid 6 status: 0
[    4.719862] Aquantia AQR113C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL)
[    4.720984] **********************************************************
[    4.728776] * NSS Data Plane driver
[    4.735273] **********************************************************
[    4.755725] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.755776] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    4.760239] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
[    4.767730] xhci-hcd xhci-hcd.1.auto: irq 42, io mem 0x08a00000
[    4.777149] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.782941] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    4.788507] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    4.796618] hub 1-0:1.0: USB hub found
[    4.802675] hub 1-0:1.0: 1 port detected
[    4.806945] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.810747] hub 2-0:1.0: USB hub found
[    4.818560] hub 2-0:1.0: 1 port detected
[    4.822592] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.826235] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    4.831644] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
[    4.839100] xhci-hcd xhci-hcd.2.auto: irq 43, io mem 0x08c00000
[    4.848510] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.854296] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    4.859868] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[    4.867780] hub 3-0:1.0: USB hub found
[    4.874021] hub 3-0:1.0: 1 port detected
[    4.877995] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.882086] hub 4-0:1.0: USB hub found
[    4.889906] hub 4-0:1.0: 1 port detected
[    4.896764] usbcore: registered new interface driver usb-storage
[    4.898410] usbcore: registered new interface driver uas
[    4.903741] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.919141] init: - preinit -
[   16.014420] random: crng init done
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   20.334187] mount_root: loading kmods from internal overlay
[   20.343502] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   20.344546] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   21.382967] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[   21.383098] block: unable to load configuration (fstab: Entry not found)
[   21.388960] block: attempting to load /tmp/overlay/etc/config/fstab
[   21.395819] block: unable to load configuration (fstab: Entry not found)
[   21.401530] block: attempting to load /etc/config/fstab
[   21.410753] block: unable to load configuration (fstab: Entry not found)
[   21.413432] block: no usable configuration
[   21.420972] block: attempting to load /etc/config/fstab
[   21.424295] block: unable to load configuration (fstab: Entry not found)
[   21.429405] block: no usable configuration
[   21.437006] loop0: detected capacity change from 0 to 122880
[   21.514446] loop0: detected capacity change from 122880 to 101888
[   21.527032] EXT4-fs (loop0): mounted filesystem c061db87-6fda-49b9-8ea8-f880925eb74c r/w with ordered data mode. Quota mode: disabled.
[   22.504011] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[   22.504141] block: unable to load configuration (fstab: Entry not found)
[   22.509883] block: attempting to load /tmp/overlay/etc/config/fstab
[   22.516688] block: unable to load configuration (fstab: Entry not found)
[   22.522602] block: attempting to load /etc/config/fstab
[   22.529589] block: unable to load configuration (fstab: Entry not found)
[   22.534484] block: no usable configuration
[   22.541616] block: attempting to load /etc/config/fstab
[   22.545373] block: unable to load configuration (fstab: Entry not found)
[   22.550592] block: no usable configuration
[   22.558248] mount_root: overlay filesystem has not been fully initialized yet
[   22.562440] mount_root: switching to ext4 overlay
[   22.572231] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[   22.576482] urandom-seed: Seed file not found (/etc/urandom.seed)
[   22.603874] procd: - early -
[   22.603961] procd: - watchdog -
Failed to connect to ubus
[   23.139396] procd: - watchdog -
[   23.140711] procd: - ubus -
[   23.294244] procd: - init -
Please press Enter to activate this console.
[   23.495422] kmodloader: loading kernel modules from /etc/modules.d/*
[   23.607837] urngd: v1.0.2 started.
[   23.609071] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[   23.612018] tun: Universal TUN/TAP device driver, 1.6
[   23.634341] hid: raw HID events driver (C) Jiri Kosina
[   23.637709] ntfs3: Enabled Linux POSIX ACLs support
[   23.652208] Bluetooth: Core ver 2.22
[   23.652348] NET: Registered PF_BLUETOOTH protocol family
[   23.654902] Bluetooth: HCI device and connection manager initialized
[   23.660168] Bluetooth: HCI socket layer initialized
[   23.666534] Bluetooth: L2CAP socket layer initialized
[   23.671119] Bluetooth: SCO socket layer initialized
[   23.678256] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.680988] Bluetooth: BNEP filters: protocol multicast
[   23.686580] Bluetooth: BNEP socket layer initialized
[   23.695813] usbcore: registered new interface driver btusb
[   23.698303] usbcore: registered new interface driver cdc_acm
[   23.701996] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   23.709078] usbcore: registered new interface driver cdc_wdm
[   23.716128] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[   23.721444] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[   23.729707] Bluetooth: HCI UART driver ver 2.3
[   23.735621] Bluetooth: HCI UART protocol H4 registered
[   23.740101] Bluetooth: HCI UART protocol BCSP registered
[   23.745237] Bluetooth: HCI UART protocol ATH3K registered
[   23.751603] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   23.756028] Bluetooth: HIDP socket layer initialized
[   23.769846] NET: Registered PF_QIPCRTR protocol family
[   23.772015] Bluetooth: RFCOMM TTY layer initialized
[   23.773888] Bluetooth: RFCOMM socket layer initialized
[   23.778689] Bluetooth: RFCOMM ver 1.11
[   23.785982] hwmon hwmon1: temp1_input not attached to any thermal zone
[   23.789309] usbcore: registered new interface driver usblp
[   23.796590] usbcore: registered new interface driver usbserial_generic
[   23.799604] usbserial: USB Serial support registered for generic
[   23.807046] usbcore: registered new interface driver cdc_ether
[   23.813128] usbcore: registered new interface driver cdc_ncm
[   23.827283] usbcore: registered new interface driver huawei_cdc_ncm
[   23.882664] PPP generic driver version 2.4.2
[   23.883598] NET: Registered PF_PPPOX protocol family
[   23.886969] usbcore: registered new interface driver qmi_wwan
[   23.891858] usbcore: registered new interface driver rndis_host
[   23.897295] usbcore: registered new interface driver sierra
[   23.902359] usbserial: USB Serial support registered for Sierra USB modem
[   23.910448] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   23.914844] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   23.931345] ath11k c000000.wifi: ipq8074 hw2.0
[   23.932185] ath11k c000000.wifi: FW memory mode: 0
[   23.962467] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[   23.962870] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[   24.693730] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[   24.737423] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[   24.744890] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[   24.744926] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[   25.108131] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
[   25.108174] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[   25.114325] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[   25.464706] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[   25.466987] usbcore: registered new interface driver cdc_mbim
[   25.472986] usbcore: registered new interface driver option
[   25.476882] usbserial: USB Serial support registered for GSM modem (1-port)
[   25.484378] usbcore: registered new interface driver qcserial
[   25.489212] usbserial: USB Serial support registered for Qualcomm USB modem
[   25.495266] kmodloader: done loading kernel modules from /etc/modules.d/*
[   25.509670] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[   25.516145] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[   25.516183] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[   25.902234] ath11k c000000.wifi: htt event 48 not handled
[   32.024994] br-lan: port 1(lan1) entered blocking state
[   32.025038] br-lan: port 1(lan1) entered disabled state
[   32.029090] nss-dp 3a001000.dp1 lan1: entered allmulticast mode
[   32.034482] nss-dp 3a001000.dp1 lan1: entered promiscuous mode
[   32.046973] br-lan: port 2(lan2) entered blocking state
[   32.047016] br-lan: port 2(lan2) entered disabled state
[   32.051210] nss-dp 3a001200.dp2 lan2: entered allmulticast mode
[   32.056651] nss-dp 3a001200.dp2 lan2: entered promiscuous mode
[   32.066194] br-lan: port 3(lan3) entered blocking state
[   32.068187] br-lan: port 3(lan3) entered disabled state
[   32.073347] nss-dp 3a001400.dp3 lan3: entered allmulticast mode
[   32.078798] nss-dp 3a001400.dp3 lan3: entered promiscuous mode
[   32.088004] br-lan: port 4(lan4) entered blocking state
[   32.090324] br-lan: port 4(lan4) entered disabled state
[   32.095525] nss-dp 3a001600.dp4 lan4: entered allmulticast mode
[   32.100841] nss-dp 3a001600.dp4 lan4: entered promiscuous mode
[   32.115135] br-lan: port 5(10g) entered blocking state
[   32.115179] br-lan: port 5(10g) entered disabled state
[   32.119221] nss-dp 3a007000.dp6-syn 10g: entered allmulticast mode
[   32.124596] nss-dp 3a007000.dp6-syn 10g: entered promiscuous mode
[   34.244713] nss-dp 3a001800.dp5 wan: PHY Link up speed: 1000
[   35.205043] nss-dp 3a001400.dp3 lan3: PHY Link up speed: 1000
[   35.205102] br-lan: port 3(lan3) entered blocking state
[   35.209783] br-lan: port 3(lan3) entered forwarding state