Temat: e2 tuner
Witam
Wiem, że to nie openwrt ale może ktoś mi podpowie co go boli?
Stracił połączenie między pamięcią a cpu?
Relocate Boot
Jump to C code
Compressed-boot v1.0.0
Uncompress...........................Ok
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0 (h9combo@builder) (Jul 24 2019 - 23:00:41)
Fastboot: Version 3.3.0
Build Date: Jul 24 2019, 23:03:26
CPU: Hi3798Mv200
Boot Media: eMMC
DDR Size: 1GB
Found flash memory controller hifmc100.
no found nand device.
MMC/SD controller initialization.
HIMCI_ERROR hi_mci_wait_data_complete:619: wait data request, CMD8(0x0), complete timeout! irq status is 0x2004
No MMC device found !
(Re)start USB...
USB0: Register 1212 NbrPorts 2
USB EHCI 1.00
scanning bus 0 for devices... 5 USB Device(s) found
USB0: Register 2000140 NbrPorts 2
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
reading bootargs.bin
bootargs.bin on device:usb:0:1 FOUND!
reading bootargs.bin from 0
...
*******************************
serial: 490000179A25ED0C
mac: 00:17:9A:25:ED:0C
*******************************
Net: eth0 phymdio(31) invalid, use default:0
upWarning: failed to set MAC address
, downWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
start download process.
SDK Version: h9combo
HIMCI_ERROR hi_mci_wait_data_complete:619: wait data request, CMD8(0x0), complete timeout! irq status is 0x2004
no eMMC available
HIMCI_ERROR hi_mci_wait_data_complete:619: wait data request, CMD8(0x0), complete timeout! irq status is 0x2004
no eMMC available
HIMCI_ERROR hi_mci_wait_data_complete:619: wait data request, CMD8(0x0), complete timeout! irq status is 0x2004
no eMMC available