[ 0.000000] Linux version 4.14.176 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 Sat Apr 25 18:51:46 2020
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[ 0.000000] MIPS: machine is TP-Link TL-WR841N v13
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 80483be0, node_mem_map 81000040
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] random: get_random_bytes called from 0x80487740 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=0006efa5
[ 0.000000] Readback ErrCtl register=0006efa5
[ 0.000000] Memory: 58816K/65536K available (3943K kernel code, 181K rwdata, 504K rodata, 1188K init, 208K bss, 6720K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] intc: using register map from devicetree
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] timer_probe: no matching timers found
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000009] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007545] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.073521] pid_max: default: 32768 minimum: 301
[ 0.078204] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.084562] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.097308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106805] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.112749] pinctrl core: initialized pinctrl subsystem
[ 0.120321] NET: Registered protocol family 16
[ 0.144889] mt7621_gpio 10000600.gpio: registering 32 gpios
[ 0.150571] mt7621_gpio 10000600.gpio: registering 32 gpios
[ 0.156097] mt7621_gpio 10000600.gpio: registering 32 gpios
[ 0.166631] clocksource: Switched to clocksource MIPS
[ 0.172713] NET: Registered protocol family 2
[ 0.177892] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.184584] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.190778] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.197035] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.202633] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.208985] NET: Registered protocol family 1
[ 0.213160] PCI: CLS 0 bytes, default 32
[ 0.216426] Crashlog allocated RAM at address 0x3f00000
[ 0.223063] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.235283] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.240917] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.260534] io scheduler noop registered
[ 0.264266] io scheduler deadline registered (default)
[ 0.270181] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.279184] console [ttyS0] disabled
[ 0.282621] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[ 0.291404] console [ttyS0] enabled
[ 0.298414] bootconsole [early0] disabled
[ 0.307963] spi-mt7621 10000b00.spi: sys_freq: 193333333
[ 0.322039] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[ 0.326843] 4 fixed-partitions partitions found on MTD device spi0.0
[ 0.333284] Creating 4 MTD partitions on "spi0.0":
[ 0.338177] 0x000000000000-0x000000020000 : "boot"
[ 0.343969] 0x000000020000-0x0000007c0000 : "firmware"
[ 0.352098] 2 tplink-fw partitions found on MTD device firmware
[ 0.358185] Creating 2 MTD partitions on "firmware":
[ 0.363235] 0x000000000000-0x000000180917 : "kernel"
[ 0.369267] 0x000000180918-0x0000007a0000 : "rootfs"
[ 0.375066] mtd: device 3 (rootfs) set to be root filesystem
[ 0.382353] 1 squashfs-split partitions found on MTD device rootfs
[ 0.388717] 0x000000590000-0x0000007a0000 : "rootfs_data"
[ 0.395106] 0x0000007c0000-0x0000007d0000 : "config"
[ 0.401074] 0x0000007d0000-0x000000800000 : "factory"
[ 0.407843] libphy: Fixed MDIO Bus: probed
[ 0.424421] rt3050-esw 10110000.esw: link changed 0x00
[ 0.431298] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.441683] NET: Registered protocol family 10
[ 0.450695] Segment Routing with IPv6
[ 0.454525] NET: Registered protocol family 17
[ 0.459164] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.472332] 8021q: 802.1Q VLAN Support v1.8
[ 0.478125] hctosys: unable to open rtc device (rtc0)
[ 0.492331] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.506048] Freeing unused kernel memory: 1188K
[ 0.510690] This architecture does not have kernel memory protection.
[ 1.509107] init: Console is alive
[ 1.512809] init: - watchdog -
[ 2.172661] random: fast init done
[ 2.940704] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.006450] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.024351] init: - preinit -
[ 4.839013] rt3050-esw 10110000.esw: link changed 0x00
[ 5.222456] random: procd: uninitialized urandom read (4 bytes read)
[ 7.819075] rt3050-esw 10110000.esw: link changed 0x02
[ 8.526016] jffs2: notice: (374) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (0 unchecked, 2 orphan) and 5 of xref (2 dead, 0 orphan) found.
[ 8.543652] mount_root: switching to jffs2 overlay
[ 8.591384] overlayfs: upper fs does not support tmpfile.
[ 8.607331] urandom-seed: Seeding with /etc/urandom.seed
[ 8.759512] procd: - early -
[ 8.762555] procd: - watchdog -
[ 9.431995] procd: - watchdog -
[ 9.435552] procd: - ubus -
[ 9.613983] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.622925] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.630024] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.637638] procd: - init -
[ 10.822450] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.888731] tun: Universal TUN/TAP device driver, 1.6
[ 10.919345] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.943719] Netfilter messages via NETLINK v0.30.
[ 10.958807] ip_set: protocol 6
[ 11.031072] Loading modules backported from Linux version v4.19.112-0-g14cfdbd39e31
[ 11.038917] Backport generated by backports.git v4.19.112-1-0-g60c3a249
[ 11.069685] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.097863] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 11.354651] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information.
[ 11.363291] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 11.396946] urngd: v1.0.2 started.
[ 11.433805] xt_time: kernel timezone is -0000
[ 11.679800] mt76_wmac 10300000.wmac: ASIC revision: 76280001
[ 11.802298] random: crng init done
[ 11.805763] random: 6 urandom warning(s) missed due to ratelimiting
[ 12.718744] mt76_wmac 10300000.wmac: Firmware Version: 20151201
[ 12.724763] mt76_wmac 10300000.wmac: Build Time: 20151201183641
[ 12.766651] mt76_wmac 10300000.wmac: firmware init done
[ 12.942984] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.081578] PPP generic driver version 2.4.2
[ 13.089132] NET: Registered protocol family 24
[ 13.110511] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 19.763059] rt3050-esw 10110000.esw: link changed 0x00
[ 22.773262] rt3050-esw 10110000.esw: link changed 0x01
[ 23.002511] rt3050-esw 10110000.esw: link changed 0x03
[ 31.217857] br-lan: port 1(eth0.1) entered blocking state
[ 31.223349] br-lan: port 1(eth0.1) entered disabled state
[ 31.229263] device eth0.1 entered promiscuous mode
[ 31.234128] device eth0 entered promiscuous mode
[ 31.325375] br-lan: port 1(eth0.1) entered blocking state
[ 31.330935] br-lan: port 1(eth0.1) entered forwarding state
[ 31.336857] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 32.257132] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 38.142422] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.161302] br-lan: port 2(wlan0) entered blocking state
[ 38.166784] br-lan: port 2(wlan0) entered disabled state
[ 38.172553] device wlan0 entered promiscuous mode
[ 40.517720] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.524393] br-lan: port 2(wlan0) entered blocking state
[ 40.529863] br-lan: port 2(wlan0) entered forwarding state
root@OpenWrt:~# [ 0.000000] Linux version 4.14.176 (cezary@eko.one.pl) (gcc v
ersion 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 Sat Apr 25 18:51:46 2020
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] Board has DDR2
ash: missing ]
root@OpenWrt:~# [ 0.000000] Analog PMU set to hw control
ash: missing ]
root@OpenWrt:~# [ 0.000000] Digital PMU set to hw control
ash: missing ]
root@OpenWrt:~# [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
ash: missing ]
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
root@OpenWrt:~# [ 0.000000] bootconsole [early0] enabled
ash: missing ]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 80483be0, node_mem_map 81000040
root@OpenWrt:~# [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] MIPS: machine is TP-Link TL-WR841N v13
ash: missing ]
[ 0.000000] Readback ErrCtl register=0006efa5
root@OpenWrt:~# [ 0.000000] Determined physical RAM map:
ash: missing ]
[ 0.000000] intc: using register map from devicetree
root@OpenWrt:~# [ 0.000000] memory: 04000000 @ 00000000 (usable)
-ash: [ 0.073521] pid_max: default: 32768 minimum: 301
syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] Initrd not found or empty - disabling initrd
ash: missing ]
[ 0.112749] pinctrl core: initialized pinctrl subsystem
root@OpenWrt:~# [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, line
size 32 bytes.
ash: missing ]
[ 0.197035] UDP hash table entries: 256 (order: 0, 4096 bytes)
root@OpenWrt:~# [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases,
linesize 32 bytes
ash: missing ]
[ 0.223063] workingset: timestamp_bits=30 max_order=14 bucket_order=0
root@OpenWrt:~# [ 0.000000] Zone ranges:
ash: missing ]
root@OpenWrt:~# [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ff
ffff]
ash: missing ]
root@OpenWrt:~# [ 0.000000] Movable zone start for each node
ash: missing ]
[ 0.298414] bootconsole [early0] disabled
root@OpenWrt:~# [ 0.000000] Early memory node ranges
ash: missing ]
root@OpenWrt:~# [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003f
fffff]
ash: missing ]
[ 0.352098] 2 tplink-fw partitions found on MTD device firmware
root@OpenWrt:~# [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00
00000003ffffff]
ash: missing ]
root@OpenWrt:~# [ 0.000000] On node 0 totalpages: 16384
ash: missing ]
root@OpenWrt:~# [ 0.000000] free_area_init_node: node 0, pgdat 80483be0, node
_mem_map 81000040
ash: missing ]
root@OpenWrt:~# [ 0.000000] Normal zone: 128 pages used for memmap
ash: missing ]
root@OpenWrt:~# [ 0.000000] Normal zone: 0 pages reserved
ash: missing ]
root@OpenWrt:~# [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
ash: missing ]
root@OpenWrt:~# [ 0.000000] random: get_random_bytes called from 0x80487740 w
ith crng_init=0
ash: missing ]
root@OpenWrt:~# [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
ash: missing ]
root@OpenWrt:~# [ 0.000000] pcpu-alloc: [0] 0
ash: missing ]
root@OpenWrt:~# [ 0.000000] Built 1 zonelists, mobility grouping on. Total p
ages: 16256
ash: missing ]
root@OpenWrt:~# [ 0.000000] Kernel command line: console=ttyS0,115200 rootfst
ype=squashfs,jffs2
ash: missing ]
root@OpenWrt:~# [ 0.000000] PID hash table entries: 256 (order: -2, 1024 byte
s)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] Dentry cache hash table entries: 8192 (order: 3,
32768 bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 1
6384 bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] Writing ErrCtl register=0006efa5
ash: missing ]
root@OpenWrt:~# [ 0.000000] Readback ErrCtl register=0006efa5
ash: missing ]
root@OpenWrt:~# [ 0.000000] Memory: 58816K/65536K available (3943K kernel cod
e, 181K rwdata, 504K rodata, 1188K init, 208K bss, 6720K reserved, 0K cma-reserv
ed)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1
, Nodes=1
ash: missing ]
root@OpenWrt:~# [ 0.000000] NR_IRQS: 256
ash: missing ]
root@OpenWrt:~# [ 0.000000] intc: using register map from devicetree
ash: missing ]
root@OpenWrt:~# [ 0.000000] CPU Clock: 580MHz
ash: missing ]
root@OpenWrt:~# [ 0.000000] timer_probe: no matching timers found
ash: missing ]
root@OpenWrt:~# [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0
xffffffff, max_idle_ns: 6590553264 ns
ash: missing ]
root@OpenWrt:~# [ 0.000009] sched_clock: 32 bits at 290MHz, resolution 3ns, w
raps every 7405115902ns
ash: missing ]
root@OpenWrt:~# [ 0.007545] Calibrating delay loop... 385.84 BogoMIPS (lpj=19
29216)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.073521] pid_max: default: 32768 minimum: 301
ash: missing ]
root@OpenWrt:~# [ 0.078204] Mount-cache hash table entries: 1024 (order: 0, 4
096 bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.084562] Mountpoint-cache hash table entries: 1024 (order:
0, 4096 bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.097308] clocksource: jiffies: mask: 0xffffffff max_cycles
: 0xffffffff, max_idle_ns: 19112604462750000 ns
ash: missing ]
root@OpenWrt:~# [ 0.106805] futex hash table entries: 256 (order: -1, 3072 by
tes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.112749] pinctrl core: initialized pinctrl subsystem
ash: missing ]
root@OpenWrt:~# [ 0.120321] NET: Registered protocol family 16
ash: missing ]
root@OpenWrt:~# [ 0.144889] mt7621_gpio 10000600.gpio: registering 32 gpios
ash: missing ]
root@OpenWrt:~# [ 0.150571] mt7621_gpio 10000600.gpio: registering 32 gpios
ash: missing ]
root@OpenWrt:~# [ 0.156097] mt7621_gpio 10000600.gpio: registering 32 gpios
ash: missing ]
root@OpenWrt:~# [ 0.166631] clocksource: Switched to clocksource MIPS
ash: missing ]
root@OpenWrt:~# [ 0.172713] NET: Registered protocol family 2
ash: missing ]
root@OpenWrt:~# [ 0.177892] TCP established hash table entries: 1024 (order:
0, 4096 bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.184584] TCP bind hash table entries: 1024 (order: 0, 4096
bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.190778] TCP: Hash tables configured (established 1024 bin
d 1024)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.197035] UDP hash table entries: 256 (order: 0, 4096 bytes
)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.202633] UDP-Lite hash table entries: 256 (order: 0, 4096
bytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.208985] NET: Registered protocol family 1
ash: missing ]
root@OpenWrt:~# [ 0.213160] PCI: CLS 0 bytes, default 32
ash: missing ]
root@OpenWrt:~# [ 0.216426] Crashlog allocated RAM at address 0x3f00000
ash: missing ]
root@OpenWrt:~# [ 0.223063] workingset: timestamp_bits=30 max_order=14 bucket
_order=0
ash: missing ]
root@OpenWrt:~# [ 0.235283] squashfs: version 4.0 (2009/01/31) Phillip Loughe
r
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.240917] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME
) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.260534] io scheduler noop registered
ash: missing ]
root@OpenWrt:~# [ 0.264266] io scheduler deadline registered (default)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.270181] Serial: 8250/16550 driver, 16 ports, IRQ sharing
enabled
ash: missing ]
root@OpenWrt:~# [ 0.279184] console [ttyS0] disabled
ash: missing ]
root@OpenWrt:~# [ 0.282621] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq
= 28, base_baud = 2500000) is a 16550A
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.291404] console [ttyS0] enabled
ash: missing ]
root@OpenWrt:~# [ 0.298414] bootconsole [early0] disabled
ash: missing ]
root@OpenWrt:~# [ 0.307963] spi-mt7621 10000b00.spi: sys_freq: 193333333
ash: missing ]
root@OpenWrt:~# [ 0.322039] m25p80 spi0.0: gd25q64 (8192 Kbytes)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.326843] 4 fixed-partitions partitions found on MTD device
spi0.0
ash: missing ]
root@OpenWrt:~# [ 0.333284] Creating 4 MTD partitions on "spi0.0":
ash: missing ]
root@OpenWrt:~# [ 0.338177] 0x000000000000-0x000000020000 : "boot"
ash: missing ]
root@OpenWrt:~# [ 0.343969] 0x000000020000-0x0000007c0000 : "firmware"
ash: missing ]
root@OpenWrt:~# [ 0.352098] 2 tplink-fw partitions found on MTD device firmwa
re
ash: missing ]
root@OpenWrt:~# [ 0.358185] Creating 2 MTD partitions on "firmware":
ash: missing ]
root@OpenWrt:~# [ 0.363235] 0x000000000000-0x000000180917 : "kernel"
ash: missing ]
root@OpenWrt:~# [ 0.369267] 0x000000180918-0x0000007a0000 : "rootfs"
ash: missing ]
root@OpenWrt:~# [ 0.375066] mtd: device 3 (rootfs) set to be root filesystem
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.382353] 1 squashfs-split partitions found on MTD device r
ootfs
ash: missing ]
root@OpenWrt:~# [ 0.388717] 0x000000590000-0x0000007a0000 : "rootfs_data"
ash: missing ]
root@OpenWrt:~# [ 0.395106] 0x0000007c0000-0x0000007d0000 : "config"
ash: missing ]
root@OpenWrt:~# [ 0.401074] 0x0000007d0000-0x000000800000 : "factory"
ash: missing ]
root@OpenWrt:~# [ 0.407843] libphy: Fixed MDIO Bus: probed
ash: missing ]
root@OpenWrt:~# [ 0.424421] rt3050-esw 10110000.esw: link changed 0x00
ash: missing ]
root@OpenWrt:~# [ 0.431298] mtk_soc_eth 10100000.ethernet eth0: mediatek fram
e engine at 0xb0100000, irq 5
ash: missing ]
root@OpenWrt:~# [ 0.441683] NET: Registered protocol family 10
ash: missing ]
root@OpenWrt:~# [ 0.450695] Segment Routing with IPv6
ash: missing ]
root@OpenWrt:~# [ 0.454525] NET: Registered protocol family 17
ash: missing ]
root@OpenWrt:~# [ 0.459164] bridge: filtering via arp/ip/ip6tables is no long
er available by default. Update your scripts to load br_netfilter if you need th
is.
ash: missing ]
root@OpenWrt:~# [ 0.472332] 8021q: 802.1Q VLAN Support v1.8
ash: missing ]
root@OpenWrt:~# [ 0.478125] hctosys: unable to open rtc device (rtc0)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.492331] VFS: Mounted root (squashfs filesystem) readonly
on device 31:3.
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 0.506048] Freeing unused kernel memory: 1188K
ash: missing ]
root@OpenWrt:~# [ 0.510690] This architecture does not have kernel memory pro
tection.
ash: missing ]
root@OpenWrt:~# [ 1.509107] init: Console is alive
ash: missing ]
root@OpenWrt:~# [ 1.512809] init: - watchdog -
ash: missing ]
root@OpenWrt:~# [ 2.172661] random: fast init done
ash: missing ]
root@OpenWrt:~# [ 2.940704] kmodloader: loading kernel modules from /etc/modu
les-boot.d/*
ash: missing ]
root@OpenWrt:~# [ 3.006450] kmodloader: done loading kernel modules from /etc
/modules-boot.d/*
ash: missing ]
root@OpenWrt:~# [ 3.024351] init: - preinit -
ash: missing ]
root@OpenWrt:~# [ 4.839013] rt3050-esw 10110000.esw: link changed 0x00
ash: missing ]
root@OpenWrt:~# [ 5.222456] random: procd: uninitialized urandom read (4 byte
s read)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 7.819075] rt3050-esw 10110000.esw: link changed 0x02
ash: missing ]
root@OpenWrt:~# [ 8.526016] jffs2: notice: (374) jffs2_build_xattr_subsystem:
complete building xattr subsystem, 4 of xdatum (0 unchecked, 2 orphan) and 5 of
xref (2 dead, 0 orphan) found.
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 8.543652] mount_root: switching to jffs2 overlay
ash: missing ]
root@OpenWrt:~# [ 8.591384] overlayfs: upper fs does not support tmpfile.
ash: missing ]
root@OpenWrt:~# [ 8.607331] urandom-seed: Seeding with /etc/urandom.seed
ash: missing ]
root@OpenWrt:~# [ 8.759512] procd: - early -
ash: missing ]
root@OpenWrt:~# [ 8.762555] procd: - watchdog -
ash: missing ]
root@OpenWrt:~# [ 9.431995] procd: - watchdog -
ash: missing ]
root@OpenWrt:~# [ 9.435552] procd: - ubus -
ash: missing ]
root@OpenWrt:~# [ 9.613983] random: ubusd: uninitialized urandom read (4 byte
s read)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 9.622925] random: ubusd: uninitialized urandom read (4 byte
s read)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 9.630024] random: ubusd: uninitialized urandom read (4 byte
s read)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 9.637638] procd: - init -
ash: missing ]
root@OpenWrt:~# [ 10.822450] kmodloader: loading kernel modules from /etc/modu
les.d/*
ash: missing ]
root@OpenWrt:~# [ 10.888731] tun: Universal TUN/TAP device driver, 1.6
ash: missing ]
root@OpenWrt:~# [ 10.919345] ip6_tables: (C) 2000-2006 Netfilter Core Team
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 10.943719] Netfilter messages via NETLINK v0.30.
ash: missing ]
root@OpenWrt:~# [ 10.958807] ip_set: protocol 6
ash: missing ]
root@OpenWrt:~# [ 11.031072] Loading modules backported from Linux version v4.
19.112-0-g14cfdbd39e31
ash: missing ]
root@OpenWrt:~# [ 11.038917] Backport generated by backports.git v4.19.112-1-0
-g60c3a249
ash: missing ]
root@OpenWrt:~# [ 11.069685] ip_tables: (C) 2000-2006 Netfilter Core Team
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 11.097863] nf_conntrack version 0.5.0 (1024 buckets, 4096 ma
x)
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 11.354651] wireguard: WireGuard 0.0.20190702 loaded. See www
.wireguard.com for information.
ash: missing ]
root@OpenWrt:~# [ 11.363291] wireguard: Copyright (C) 2015-2019 Jason A. Donen
feld <Jason@zx2c4.com>. All Rights Reserved.
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 11.396946] urngd: v1.0.2 started.
ash: missing ]
root@OpenWrt:~# [ 11.433805] xt_time: kernel timezone is -0000
ash: missing ]
root@OpenWrt:~# [ 11.679800] mt76_wmac 10300000.wmac: ASIC revision: 76280001
ash: missing ]
root@OpenWrt:~# [ 11.802298] random: crng init done
ash: missing ]
root@OpenWrt:~# [ 11.805763] random: 6 urandom warning(s) missed due to rateli
miting
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 12.718744] mt76_wmac 10300000.wmac: Firmware Version: 201512
01
ash: missing ]
root@OpenWrt:~# [ 12.724763] mt76_wmac 10300000.wmac: Build Time: 201512011836
41
ash: missing ]
root@OpenWrt:~# [ 12.766651] mt76_wmac 10300000.wmac: firmware init done
ash: missing ]
root@OpenWrt:~# [ 12.942984] ieee80211 phy0: Selected rate control algorithm '
minstrel_ht'
ash: missing ]
root@OpenWrt:~# [ 13.081578] PPP generic driver version 2.4.2
ash: missing ]
root@OpenWrt:~# [ 13.089132] NET: Registered protocol family 24
ash: missing ]
root@OpenWrt:~# [ 13.110511] kmodloader: done loading kernel modules from /etc
/modules.d/*
ash: missing ]
root@OpenWrt:~# [ 19.763059] rt3050-esw 10110000.esw: link changed 0x00
ash: missing ]
root@OpenWrt:~# [ 22.773262] rt3050-esw 10110000.esw: link changed 0x01
ash: missing ]
root@OpenWrt:~# [ 23.002511] rt3050-esw 10110000.esw: link changed 0x03
ash: missing ]
root@OpenWrt:~# [ 31.217857] br-lan: port 1(eth0.1) entered blocking state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 31.223349] br-lan: port 1(eth0.1) entered disabled state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 31.229263] device eth0.1 entered promiscuous mode
ash: missing ]
root@OpenWrt:~# [ 31.234128] device eth0 entered promiscuous mode
ash: missing ]
root@OpenWrt:~# [ 31.325375] br-lan: port 1(eth0.1) entered blocking state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 31.330935] br-lan: port 1(eth0.1) entered forwarding state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 31.336857] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not re
ady
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 32.257132] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becom
es ready
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 38.142422] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not rea
dy
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 38.161302] br-lan: port 2(wlan0) entered blocking state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 38.166784] br-lan: port 2(wlan0) entered disabled state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 38.172553] device wlan0 entered promiscuous mode
ash: missing ]
root@OpenWrt:~# [ 40.517720] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link become
s ready
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 40.524393] br-lan: port 2(wlan0) entered blocking state
-ash: syntax error: unexpected "("
root@OpenWrt:~# [ 40.529863] br-lan: port 2(wlan0) entered forwarding state
-ash: syntax error: unexpected "("