1. Jak podłączysz do PC to masz dostęp do gui modemu? Bo może masz przełączony w inny tryb
2. Jak zrestartujesz to zobacz czy zwykłe wget http://192.168.8.1 coś zwraca (czy jaki tam masz na nim adres).

1. Nie, jak zte podłączysz do PC. Masz dostęp do jego gui pod http://192.168.0.1?

To jak będziesz wieczorem miał dostęp do niego to zrób ten wget i zobaczymy co się dzieje.

sieć, routing, wget, iptables

################################################################################
root@Gargoyle:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a7 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::62e3:27ff:fec8:50a7/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a6 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::62e3:27ff:fec8:50a6/64 scope link
       valid_lft forever preferred_lft forever
5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1000
    link/gre 0.0.0.0 brd 0.0.0.0
6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
7: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
8: imq0: <NOARP> mtu 16000 qdisc noop state DOWN group default qlen 11000
    link/void
9: imq1: <NOARP> mtu 16000 qdisc noop state DOWN group default qlen 11000
    link/void
10: teql0: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 100
    link/void
13: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a6 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fd3c:4e38:dd31::1/60 scope global noprefixroute
       valid_lft forever preferred_lft forever
    inet6 fe80::62e3:27ff:fec8:50a6/64 scope link
       valid_lft forever preferred_lft forever
14: eth1.1@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a6 brd ff:ff:ff:ff:ff:ff
15: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a7 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::62e3:27ff:fec8:50a7/64 scope link
       valid_lft forever preferred_lft forever
16: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a5 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::62e3:27ff:fec8:50a5/64 scope link
       valid_lft forever preferred_lft forever
17: wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP group default qlen 1000
    link/ether 60:e3:27:c8:50:a6 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::62e3:27ff:fec8:50a6/64 scope link
       valid_lft forever preferred_lft forever
19: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether 60:e3:27:c8:50:a7 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.134/24 brd 192.168.0.255 scope global usb0
       valid_lft forever preferred_lft forever

################################################################################
root@Gargoyle:~# ip r
default via 192.168.0.1 dev usb0 proto static src 192.168.0.134
192.168.0.0/24 dev usb0 proto kernel scope link src 192.168.0.134
192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1

################################################################################
root@Gargoyle:~# ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
64 bytes from 192.168.0.1: seq=0 ttl=64 time=1.589 ms
64 bytes from 192.168.0.1: seq=1 ttl=64 time=1.389 ms
64 bytes from 192.168.0.1: seq=2 ttl=64 time=1.287 ms
64 bytes from 192.168.0.1: seq=3 ttl=64 time=1.508 ms
^C
--- 192.168.0.1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 1.287/1.443/1.589 ms

################################################################################
root@Gargoyle:~# wget http://192.168.0.1
Downloading 'http://192.168.0.1'
Connecting to 192.168.0.1:80
Redirected to /index.html on 192.168.0.1
Writing to 'index.html'
index.html           100% |*******************************| 11193   0:00:00 ETA
Download completed (11193 bytes)
root@Gargoyle:~#

################################################################################
root@Gargoyle:~# iptables -nvxL -t nat
iptables v1.6.2: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

################################################################################
root@Gargoyle:~# iptables -nvxL
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
    pkts      bytes target     prot opt in     out     source               destination
     475    60231 bw_ingress  all  --  usb0   *       0.0.0.0/0            0.0.0.0/0
     214    13772 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
    2493   274216 input_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom input rule chain */
    1533   200022 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED /* !fw3 */
      10      520 syn_flood  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp flags:0x17/0x02 /* !fw3 */
     960    74194 zone_lan_input  all  --  br-lan *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 zone_wan_input  all  --  usb0   *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 zone_wan_input  all  --  eth0.2 *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain FORWARD (policy DROP 0 packets, 0 bytes)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 bw_ingress  all  --  usb0   *       0.0.0.0/0            0.0.0.0/0
       0        0 ingress_restrictions  all  --  usb0   *       0.0.0.0/0            0.0.0.0/0
     144    14409 egress_restrictions  all  --  *      usb0    0.0.0.0/0            0.0.0.0/0
     144    14409 forwarding_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom forwarding rule chain */
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED /* !fw3 */
     144    14409 zone_lan_forward  all  --  br-lan *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 zone_wan_forward  all  --  usb0   *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 zone_wan_forward  all  --  eth0.2 *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 reject     all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
    pkts      bytes target     prot opt in     out     source               destination
     214    13772 ACCEPT     all  --  *      lo      0.0.0.0/0            0.0.0.0/0            /* !fw3 */
    1939   506339 output_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom output rule chain */
    1511   478039 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED /* !fw3 */
       4     1324 zone_lan_output  all  --  *      br-lan  0.0.0.0/0            0.0.0.0/0            /* !fw3 */
     424    26976 zone_wan_output  all  --  *      usb0    0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 zone_wan_output  all  --  *      eth0.2  0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain bw_ingress (2 references)
    pkts      bytes target     prot opt in     out     source               destination
     475    60231 CONNMARK   all  --  *      *       0.0.0.0/0            0.0.0.0/0            CONNMARK and 0xffffff
       0        0 CONNMARK   all  --  *      *       0.0.0.0/0            192.168.1.0/24       CONNMARK xset 0xf000000/0xff000000
     475    60231 CONNMARK   all  --  *      *       0.0.0.0/0            192.168.0.134        CONNMARK xset 0xf000000/0xff000000
       0        0 RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0            connmark match  0x0/0xf000000
     475    60231 CONNMARK   all  --  *      *       0.0.0.0/0            0.0.0.0/0            CONNMARK and 0xffffff
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id total1-download-2-449 --type combined --current_bandwidth 0 --reset_interval 2 --reset_time 2 --intervals_to_save 449
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id bdist1-download-minute-15 --type individual_dst --reset_interval minute --intervals_to_save 15
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id total2-download-minute-359 --type combined --current_bandwidth 0 --reset_interval minute --intervals_to_save 359
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id bdist2-download-900-24 --type individual_dst --reset_interval 900 --reset_time 900 --intervals_to_save 24
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id total3-download-180-479 --type combined --current_bandwidth 0 --reset_interval 180 --reset_time 180 --intervals_to_save 479
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id bdist3-download-hour-24 --type individual_dst --reset_interval hour --intervals_to_save 24
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id total4-download-7200-359 --type combined --current_bandwidth 0 --reset_interval 7200 --reset_time 7200 --intervals_to_save 359
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id bdist4-download-day-31 --type individual_dst --reset_interval day --intervals_to_save 31
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id total5-download-day-365 --type combined --current_bandwidth 0 --reset_interval day --intervals_to_save 365
       0        0            all  --  *      *       0.0.0.0/0            0.0.0.0/0           bandwidth --id bdist5-download-month-12 --type individual_dst --reset_interval month --intervals_to_save 12

Chain egress_restrictions (1 references)
    pkts      bytes target     prot opt in     out     source               destination
     144    14409 egress_whitelist  all  --  *      *       0.0.0.0/0            0.0.0.0/0

Chain egress_whitelist (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain forwarding_lan_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain forwarding_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain forwarding_wan_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain ingress_restrictions (1 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 ingress_whitelist  all  --  *      *       0.0.0.0/0            0.0.0.0/0

Chain ingress_whitelist (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain input_lan_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain input_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain input_wan_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain output_lan_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain output_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain output_wan_rule (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain pf_loopback_B (1 references)
    pkts      bytes target     prot opt in     out     source               destination

Chain reject (5 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 REJECT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */ reject-with tcp-reset
       0        0 REJECT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */ reject-with icmp-port-unreachable

Chain syn_flood (1 references)
    pkts      bytes target     prot opt in     out     source               destination
      10      520 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp flags:0x17/0x02 limit: avg 25/sec burst 50 /* !fw3 */
       0        0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_lan_dest_ACCEPT (4 references)
    pkts      bytes target     prot opt in     out     source               destination
       4     1324 ACCEPT     all  --  *      br-lan  0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_lan_forward (1 references)
    pkts      bytes target     prot opt in     out     source               destination
     144    14409 pf_loopback_B  all  --  *      *       0.0.0.0/0            0.0.0.0/0
       0        0 ACCEPT     all  --  br-lan br-lan  0.0.0.0/0            0.0.0.0/0
     144    14409 forwarding_lan_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom lan forwarding rule chain */
     144    14409 zone_wan_dest_ACCEPT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Zone lan to wan forwarding policy */
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate DNAT /* !fw3: Accept port forwards */
       0        0 zone_lan_dest_ACCEPT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_lan_input (1 references)
    pkts      bytes target     prot opt in     out     source               destination
     960    74194 input_lan_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom lan input rule chain */
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate DNAT /* !fw3: Accept port redirections */
     960    74194 zone_lan_src_ACCEPT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_lan_output (1 references)
    pkts      bytes target     prot opt in     out     source               destination
       4     1324 output_lan_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom lan output rule chain */
       4     1324 zone_lan_dest_ACCEPT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_lan_src_ACCEPT (1 references)
    pkts      bytes target     prot opt in     out     source               destination
     960    74194 ACCEPT     all  --  br-lan *       0.0.0.0/0            0.0.0.0/0            ctstate NEW,UNTRACKED /* !fw3 */

Chain zone_wan_dest_ACCEPT (2 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 DROP       all  --  *      usb0    0.0.0.0/0            0.0.0.0/0            ctstate INVALID /* !fw3: Prevent NAT leakage */
     568    41385 ACCEPT     all  --  *      usb0    0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 DROP       all  --  *      eth0.2  0.0.0.0/0            0.0.0.0/0            ctstate INVALID /* !fw3: Prevent NAT leakage */
       0        0 ACCEPT     all  --  *      eth0.2  0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_wan_dest_REJECT (1 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 reject     all  --  *      usb0    0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 reject     all  --  *      eth0.2  0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_wan_forward (2 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 forwarding_wan_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom wan forwarding rule chain */
       0        0 zone_lan_dest_ACCEPT  esp  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Allow-IPSec-ESP */
       0        0 zone_lan_dest_ACCEPT  udp  --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:500 /* !fw3: Allow-ISAKMP */
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate DNAT /* !fw3: Accept port forwards */
       0        0 zone_wan_dest_REJECT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_wan_input (2 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 input_wan_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom wan input rule chain */
       0        0 ACCEPT     udp  --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:68 /* !fw3: Allow-DHCP-Renew */
       0        0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 8 /* !fw3: Allow-Ping */
       0        0 ACCEPT     2    --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Allow-IGMP */
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate DNAT /* !fw3: Accept port redirections */
       0        0 zone_wan_src_REJECT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_wan_output (2 references)
    pkts      bytes target     prot opt in     out     source               destination
     424    26976 output_wan_rule  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3: Custom wan output rule chain */
     424    26976 zone_wan_dest_ACCEPT  all  --  *      *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */

Chain zone_wan_src_REJECT (1 references)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 reject     all  --  usb0   *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
       0        0 reject     all  --  eth0.2 *       0.0.0.0/0            0.0.0.0/0            /* !fw3 */
root@Gargoyle:~#

Na przeglądarce nie wyświetla nic, brak połączenia/przekroczono limit czasu połączenia
Pinguje tylko na alias ip rotera z sieci 192.168.0.0/24
Ping na modem nie odpowiada.

C:\>ping 192.168.0.134
Badanie 192.168.0.134 z 32 bajtami danych:
Odpowiedź z 192.168.0.134: bajtów=32 czas=2ms TTL=64
Odpowiedź z 192.168.0.134: bajtów=32 czas=2ms TTL=64

C:\>ping 192.168.0.1
Badanie 192.168.0.1 z 32 bajtami danych:
Upłynął limit czasu żądania.
Upłynął limit czasu żądania.

Nie ma zapiętych żadnych filtrów mac, firewalli itp.
To jest czysta instalacja bez ingerencji w konfigurację,
tylko podpięty modem i ustawiony na WAN.

Nie mam też ustawionych żadnych dziwnych aliasów, dns'ów i tras u siebie lokalnie na pc (kliencie).

W modemie nie ma żadnych ograniczeń ani filtrów.
Działa bez problemu na innych TPlinkach z Gargoylem.

Całkiem przypadkiem mam dostęp do zte mf823. Bez problemu działa dostęp do gui z poziomu klienta.

Po restarcie zrób logread i zobacz czy czegoś niepokojącego nie ma. Zrób też lsmod i mount, zobacz jakie moduły są załadowane.

########              OK             ##################

root@Gargoyle:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.105 (cezary@eko.one.pl) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7353-486dc7583d)) #0 SMP Fri Mar 8 15:56:11 2019
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link Archer C2600
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0a27e00, node_mem_map ddc39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from 0xc09008dc with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @ddc01000 s29388 r8192 d23860 u61440
[    0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line:
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 479420K/491520K available (4903K kernel code, 161K rwdata, 756K rodata, 1024K init, 234K bss, 12100K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc07c9f38   (5896 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
[    0.000000]       .data : 0xc0a00000 - 0xc0a28700   ( 162 kB)
[    0.000000]        .bss : 0xc0a2a000 - 0xc0a64a98   ( 235 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000021] Switching to timer-based delay loop, resolution 160ns
[    0.000241] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000269] pid_max: default: 32768 minimum: 301
[    0.000400] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000418] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000990] CPU: Testing write buffer coherency: ok
[    0.001748] Setting up static identity map for 0x42300000 - 0x42300060
[    0.001903] Hierarchical SRCU implementation.
[    0.002629] smp: Bringing up secondary CPUs ...
[    0.004430] smp: Brought up 1 node, 2 CPUs
[    0.004450] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.004462] CPU: All CPU(s) started in SVC mode.
[    0.014765] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.014927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014952] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015065] pinctrl core: initialized pinctrl subsystem
[    0.016037] NET: Registered protocol family 16
[    0.016284] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.017607] cpuidle: using governor ladder
[    0.017668] cpuidle: using governor menu
[    0.038501] msm_bus_fabric_init_driver
[    0.039904] usbcore: registered new interface driver usbfs
[    0.040004] usbcore: registered new interface driver hub
[    0.040091] usbcore: registered new device driver usb
[    0.040148] pps_core: LinuxPPS API ver. 1 registered
[    0.040161] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.040193] PTP clock support registered
[    0.042032] clocksource: Switched to clocksource dg_timer
[    0.045278] NET: Registered protocol family 2
[    0.045868] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.045911] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.045967] TCP: Hash tables configured (established 4096 bind 4096)
[    0.046057] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.046082] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.046271] NET: Registered protocol family 1
[    0.046318] PCI: CLS 0 bytes, default 64
[    0.047416] No memory allocated for crashlog
[    0.047686] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.052833] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.052850] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.062251] io scheduler noop registered
[    0.062272] io scheduler deadline registered (default)
[    0.064007] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.064117] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.064214] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.065054] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[    0.065101] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.065128] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.172961] qcom-pcie 1b500000.pci: link up
[    0.173137] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.173161] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.173181] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.173197] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.173215] pci_bus 0000:00: scanning bus
[    0.173260] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.173347] pci 0000:00:00.0: calling 0xc030d3c0
[    0.173419] pci 0000:00:00.0: supports D1
[    0.173434] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.173451] pci 0000:00:00.0: PME# disabled
[    0.173703] pci_bus 0000:00: fixups for bus
[    0.173726] PCI: bus0: Fast back to back transfers disabled
[    0.173748] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.173878] pci_bus 0000:01: scanning bus
[    0.174052] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.174404] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.174869] pci 0000:01:00.0: calling 0xc030d3c0
[    0.175511] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.175552] pci 0000:01:00.0: PME# disabled
[    0.175876] pci_bus 0000:01: fixups for bus
[    0.175949] PCI: bus1: Fast back to back transfers disabled
[    0.175967] pci_bus 0000:01: bus scan returning with max=01
[    0.175986] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.176003] pci_bus 0000:00: bus scan returning with max=ff
[    0.176053] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.176077] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.176206] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.176231] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.176263] pci 0000:00:00.0: calling 0xc05542fc
[    0.176457] pcieport 0000:00:00.0: assign IRQ: got 66
[    0.176782] pcieport 0000:00:00.0: AER enabled with IRQ 34
[    0.176894] pci 0000:01:00.0: calling 0xc05542fc
[    0.177324] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    0.177422] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.177526] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.178336] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[    0.178375] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.178398] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.288359] qcom-pcie 1b700000.pci: link up
[    0.288506] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.288526] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.288542] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.288556] pci_bus 0001:00: scanning bus
[    0.288596] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.288667] pci 0001:00:00.0: calling 0xc030d3c0
[    0.288729] pci 0001:00:00.0: supports D1
[    0.288741] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.288756] pci 0001:00:00.0: PME# disabled
[    0.288993] pci_bus 0001:00: fixups for bus
[    0.289012] PCI: bus0: Fast back to back transfers disabled
[    0.289031] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.289148] pci_bus 0001:01: scanning bus
[    0.289334] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.289706] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.290206] pci 0001:01:00.0: calling 0xc030d3c0
[    0.290899] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.290942] pci 0001:01:00.0: PME# disabled
[    0.291286] pci_bus 0001:01: fixups for bus
[    0.291363] PCI: bus1: Fast back to back transfers disabled
[    0.291379] pci_bus 0001:01: bus scan returning with max=01
[    0.291396] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.291413] pci_bus 0001:00: bus scan returning with max=ff
[    0.291452] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.291474] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.291606] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.291626] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.291656] pci 0001:00:00.0: calling 0xc05542fc
[    0.291834] pcieport 0001:00:00.0: assign IRQ: got 99
[    0.292133] pcieport 0001:00:00.0: AER enabled with IRQ 67
[    0.292363] pci 0001:01:00.0: calling 0xc05542fc
[    0.294540] L2 @ QSB rate. Forcing new rate.
[    0.294754] L2 @ 384000 KHz
[    0.294922] CPU0 @ 800000 KHz
[    0.294936] CPU1 @ QSB rate. Forcing new rate.
[    0.295055] CPU1 @ 384000 KHz
[    0.298948] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.300356] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[    0.301813] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.304562] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.304673] msm_serial 16340000.serial: uartclk = 7372800
[    0.304755] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
[    0.304792] msm_serial: console setup on port #0
[    1.033551] console [ttyMSM0] enabled
[    1.038266] msm_serial: driver initialized
[    1.046880] loop: module loaded
[    1.048360] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.050255] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
[    1.056479] 25 fixed-partitions partitions found on MTD device spi0.0
[    1.061159] Creating 25 MTD partitions on "spi0.0":
[    1.067581] 0x000000000000-0x000000020000 : "SBL1"
[    1.073114] 0x000000020000-0x000000040000 : "MIBIB"
[    1.077793] 0x000000040000-0x000000060000 : "SBL2"
[    1.082628] 0x000000060000-0x000000090000 : "SBL3"
[    1.087413] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
[    1.092202] 0x0000000a0000-0x0000000b0000 : "SSD"
[    1.097420] 0x0000000b0000-0x0000000e0000 : "TZ"
[    1.102156] 0x0000000e0000-0x000000100000 : "RPM"
[    1.106931] 0x000000100000-0x000000170000 : "fs-uboot"
[    1.111455] 0x000000170000-0x0000001b0000 : "uboot-env"
[    1.116592] 0x0000001b0000-0x0000001f0000 : "radio"
[    1.121634] 0x0000001f0000-0x0000005f0000 : "os-image"
[    1.126558] 0x0000005f0000-0x000001ef0000 : "rootfs"
[    1.131671] mtd: device 12 (rootfs) set to be root filesystem
[    1.136927] 1 squashfs-split partitions found on MTD device rootfs
[    1.141741] 0x000000bf0000-0x000001ef0000 : "rootfs_data"
[    1.149195] 0x000001ef0000-0x000001ef0200 : "default-mac"
[    1.154516] 0x000001ef0200-0x000001ef0400 : "pin"
[    1.159748] 0x000001ef0400-0x000001f00000 : "product-info"
[    1.164550] 0x000001f00000-0x000001f10000 : "partition-table"
[    1.169796] 0x000001f10000-0x000001f20000 : "soft-version"
[    1.175779] 0x000001f20000-0x000001f30000 : "support-list"
[    1.181008] 0x000001f30000-0x000001f40000 : "profile"
[    1.186656] 0x000001f40000-0x000001f50000 : "default-config"
[    1.191606] 0x000001f50000-0x000001f90000 : "user-config"
[    1.197442] 0x000001f90000-0x000001fd0000 : "qos-db"
[    1.202777] 0x000001fd0000-0x000001fe0000 : "usb-config"
[    1.207671] 0x000001fe0000-0x000002000000 : "log"
[    1.214470] libphy: GPIO Bitbanged MDIO: probed
[    1.240234] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    2.098636] libphy: Fixed MDIO Bus: probed
[    2.101070] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    2.102084] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.108275] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    2.113283] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    2.119270] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    2.127341] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    2.134902] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    2.141839] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    2.149833] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    2.155642] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    2.163020] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.172263] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    2.178570] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.184746] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    2.189664] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    2.195818] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    2.203815] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    2.211281] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    2.218404] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    2.226306] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    2.232028] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    2.239493] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.247241] i2c /dev entries driver
[    2.256087] Calibration not found.
[    2.257980] qcom-tsens 900000.thermal-sensor: tsens calibration failed
[    2.263240] Speed bin: 0
[    2.267951] PVS bin: 1
[    2.272559] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.272923] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.280756] sdhci: Secure Digital Host Controller Interface driver
[    2.287405] sdhci: Copyright(c) Pierre Ossman
[    2.293655] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.300305] NET: Registered protocol family 10
[    2.305770] Segment Routing with IPv6
[    2.308088] NET: Registered protocol family 17
[    2.311784] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.316724] 8021q: 802.1Q VLAN Support v1.8
[    2.329320] Registering SWP/SWPB emulation handler
[    2.350071] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    2.363567] s1a: supplied by regulator-dummy
[    2.363692] s1a: Bringing 0uV into 1050000-1050000uV
[    2.367324] s1b: supplied by regulator-dummy
[    2.371935] s1b: Bringing 0uV into 1050000-1050000uV
[    2.376600] s2a: supplied by regulator-dummy
[    2.381155] s2a: Bringing 0uV into 800000-800000uV
[    2.385779] s2b: supplied by regulator-dummy
[    2.389990] s2b: Bringing 0uV into 800000-800000uV
[    2.400466] hctosys: unable to open rtc device (rtc0)
[    2.409617] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[    2.410469] Freeing unused kernel memory: 1024K
[    2.434225] random: fast init done
[    3.103602] random: crng init done
[    3.262942] init: Console is alive
[    3.263153] init: - watchdog -
[    6.343685] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.474414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.476467] SCSI subsystem initialized
[    6.482226] libata version 3.00 loaded.
[    6.485280] ehci-platform: EHCI generic platform driver
[    6.487782] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.489687] ohci-platform: OHCI generic platform driver
[    6.629287] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.629372] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.634108] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[    6.641323] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000
[    6.651424] hub 1-0:1.0: USB hub found
[    6.657024] hub 1-0:1.0: 1 port detected
[    6.660621] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.664578] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.669788] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    6.677502] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.684344] hub 2-0:1.0: USB hub found
[    6.692351] hub 2-0:1.0: 1 port detected
[    6.696076] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.699913] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    6.705413] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[    6.712854] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000
[    6.722617] hub 3-0:1.0: USB hub found
[    6.728395] hub 3-0:1.0: 1 port detected
[    6.732144] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.736073] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    6.741314] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    6.749036] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.755897] hub 4-0:1.0: USB hub found
[    6.763906] hub 4-0:1.0: 1 port detected
[    6.770012] usbcore: registered new interface driver usb-storage
[    6.771959] usbcore: registered new interface driver uas
[    6.777609] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.788623] init: - preinit -
[    9.368162] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[    9.369710] dwmac1000: Master AXI performs any burst length
[    9.377159] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    9.382673] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    9.392493] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.482457] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   10.482610] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   12.548085] mount_root: loading kmods from internal overlay
[   12.583669] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   12.586542] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   15.067876] jffs2: notice: (144) jffs2_build_xattr_subsystem: complete building xattr subsystem, 17 of xdatum (3 unchecked, 14 orphan) and 49 of xref (14 dead, 5 orphan) found.
[   15.069157] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   15.108957] block: extroot: not configured
[   15.396682] jffs2: notice: (142) jffs2_build_xattr_subsystem: complete building xattr subsystem, 17 of xdatum (3 unchecked, 14 orphan) and 49 of xref (14 dead, 5 orphan) found.
[   15.404950] mount_root: loading kmods from internal overlay
[   15.442281] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   15.457157] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   17.893679] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   17.914903] block: extroot: not configured
[   17.954772] mount_root: switching to jffs2 overlay
[   18.016447] overlayfs: upper fs does not support tmpfile.
[   18.029059] urandom-seed: Seeding with /etc/urandom.seed
[   18.233987] procd: - early -
[   18.234124] procd: - watchdog -
[   18.900053] procd: - watchdog -
[   18.900381] procd: - ubus -
[   18.981171] procd: - init -
[   19.257515] kmodloader: loading kernel modules from /etc/modules.d/*
[   19.274066] Key type dns_resolver registered
[   19.284721] RPC: Registered named UNIX socket transport module.
[   19.284752] RPC: Registered udp transport module.
[   19.289443] RPC: Registered tcp transport module.
[   19.294414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   19.305051] tun: Universal TUN/TAP device driver, 1.6
[   19.310545] gre: GRE over IPv4 demultiplexor driver
[   19.311449] ip_gre: GRE over IPv4 tunneling driver
[   19.331129] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   19.343548]  Hooked IMQ after mangle on PREROUTING
[   19.343589]  Hooked IMQ after nat on POSTROUTING
[   19.347240] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[   19.352018]  Hooking IMQ before NAT on PREROUTING.
[   19.361271]  Hooking IMQ after NAT on POSTROUTING.
[   19.370557] u32 classifier
[   19.370573]     input device check on
[   19.373245]     Actions configured
[   19.377630] Mirror/redirect action on
[   19.389138] fuse init (API version 7.26)
[   19.392142] usbcore: registered new interface driver cdc_acm
[   19.392164] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.398392] usbcore: registered new interface driver cdc_wdm
[   19.405936] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   19.411392] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   19.422660] Ebtables v2.0 registered
[   19.426871] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.434536] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   19.520999] usbcore: registered new interface driver ums-alauda
[   19.522656] usbcore: registered new interface driver ums-cypress
[   19.526886] usbcore: registered new interface driver ums-datafab
[   19.532908] usbcore: registered new interface driver ums-freecom
[   19.538908] usbcore: registered new interface driver ums-isd200
[   19.545492] usbcore: registered new interface driver ums-jumpshot
[   19.550727] usbcore: registered new interface driver ums-karma
[   19.557540] usbcore: registered new interface driver ums-sddr09
[   19.562920] usbcore: registered new interface driver ums-sddr55
[   19.568781] usbcore: registered new interface driver ums-usbat
[   19.574329] usbcore: registered new interface driver usblp
[   19.585333] usbcore: registered new interface driver usbserial
[   19.585422] usbcore: registered new interface driver usbserial_generic
[   19.590560] usbserial: USB Serial support registered for generic
[   19.623698] xt_time: kernel timezone is -0000
[   19.625019] usbcore: registered new interface driver cdc_ether
[   19.629016] usbcore: registered new interface driver cdc_ncm
[   19.656178] usbcore: registered new interface driver huawei_cdc_ncm
[   19.691723] PPP generic driver version 2.4.2
[   19.692864] NET: Registered protocol family 24
[   19.695720] PPTP driver version 0.8.5
[   19.700285] usbcore: registered new interface driver qmi_wwan
[   19.705006] usbcore: registered new interface driver rndis_host
[   19.710947] usbcore: registered new interface driver sierra
[   19.714764] usbserial: USB Serial support registered for Sierra USB modem
[   19.722490] usbcore: registered new interface driver sierra_net
[   19.736021] ath10k_pci 0000:01:00.0: assign IRQ: got 66
[   19.738284] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[   19.738376] ath10k_pci 0000:01:00.0: enabling bus mastering
[   19.738832] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   19.932469] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[   19.932500] ath10k_pci 0000:01:00.0: Falling back to user helper
[   35.772818] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   36.398194] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   36.398228] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   36.408049] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[   36.483842] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
[   37.748232] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   37.835978] ath: EEPROM regdomain: 0x0
[   37.835992] ath: EEPROM indicates default country code should be used
[   37.836000] ath: doing EEPROM country->regdmn map search
[   37.836016] ath: country maps to regdmn code: 0x3a
[   37.836027] ath: Country alpha2 being used: US
[   37.836035] ath: Regpair used: 0x3a
[   37.841797] ath10k_pci 0001:01:00.0: assign IRQ: got 99
[   37.843052] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   37.843192] ath10k_pci 0001:01:00.0: enabling bus mastering
[   37.843834] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   38.017045] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[   38.017076] ath10k_pci 0001:01:00.0: Falling back to user helper
[   38.339846] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   38.340087] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   38.347830] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   38.358913] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[   38.422656] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
[   39.703484] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   39.785331] ath: EEPROM regdomain: 0x0
[   39.785340] ath: EEPROM indicates default country code should be used
[   39.785347] ath: doing EEPROM country->regdmn map search
[   39.785360] ath: country maps to regdmn code: 0x3a
[   39.785368] ath: Country alpha2 being used: US
[   39.785374] ath: Regpair used: 0x3a
[   39.789936] usbcore: registered new interface driver cdc_mbim
[   39.791103] usbcore: registered new interface driver option
[   39.794890] usbserial: USB Serial support registered for GSM modem (1-port)
[   39.803757] usbcore: registered new interface driver qcserial
[   39.807042] usbserial: USB Serial support registered for Qualcomm USB modem
[   39.813107] kmodloader: done loading kernel modules from /etc/modules.d/*
[   45.761330] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[   45.762491] dwmac1000: Master AXI performs any burst length
[   45.770230] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   45.775838] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   45.784869] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   45.803773] br-lan: port 1(eth1.1) entered blocking state
[   45.803811] br-lan: port 1(eth1.1) entered disabled state
[   45.808420] device eth1.1 entered promiscuous mode
[   45.813648] device eth1 entered promiscuous mode
[   45.823381] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   45.849905] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[   45.850982] dwmac1000: Master AXI performs any burst length
[   45.858999] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   45.864420] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   45.873864] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.872827] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   46.875893] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   46.881641] br-lan: port 1(eth1.1) entered blocking state
[   46.886851] br-lan: port 1(eth1.1) entered forwarding state
[   46.919222] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   46.962547] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   46.962617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   47.280648] ath: EEPROM regdomain: 0x8268
[   47.280656] ath: EEPROM indicates we should expect a country code
[   47.280661] ath: doing EEPROM country->regdmn map search
[   47.280667] ath: country maps to regdmn code: 0x37
[   47.280672] ath: Country alpha2 being used: PL
[   47.280676] ath: Regpair used: 0x37
[   47.280682] ath: regdomain 0x8268 dynamically updated by user
[   47.280710] ath: EEPROM regdomain: 0x8268
[   47.280719] ath: EEPROM indicates we should expect a country code
[   47.280728] ath: doing EEPROM country->regdmn map search
[   47.280735] ath: country maps to regdmn code: 0x37
[   47.280744] ath: Country alpha2 being used: PL
[   47.280749] ath: Regpair used: 0x37
[   47.280754] ath: regdomain 0x8268 dynamically updated by user
[   49.736467] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   49.745930] br-lan: port 2(wlan1) entered blocking state
[   49.745969] br-lan: port 2(wlan1) entered disabled state
[   49.750632] device wlan1 entered promiscuous mode
[   50.261116] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   50.261346] br-lan: port 2(wlan1) entered blocking state
[   50.266650] br-lan: port 2(wlan1) entered forwarding state
[   52.082474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   52.087845] br-lan: port 3(wlan0) entered blocking state
[   52.087883] br-lan: port 3(wlan0) entered disabled state
[   52.093018] device wlan0 entered promiscuous mode
[   52.490809] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.490937] br-lan: port 3(wlan0) entered blocking state
[   52.496299] br-lan: port 3(wlan0) entered forwarding state
root@Gargoyle:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock13 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@Gargoyle:~#

########              NOK             ##################

root@Gargoyle:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.105 (cezary@eko.one.pl) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7353-486dc7583d)) #0 SMP Fri Mar 8 15:56:11 2019
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link Archer C2600
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0a27e00, node_mem_map ddc39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from 0xc09008dc with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @ddc01000 s29388 r8192 d23860 u61440
[    0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line:
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 479420K/491520K available (4903K kernel code, 161K rwdata, 756K rodata, 1024K init, 234K bss, 12100K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc07c9f38   (5896 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
[    0.000000]       .data : 0xc0a00000 - 0xc0a28700   ( 162 kB)
[    0.000000]        .bss : 0xc0a2a000 - 0xc0a64a98   ( 235 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000021] Switching to timer-based delay loop, resolution 160ns
[    0.000241] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000269] pid_max: default: 32768 minimum: 301
[    0.000399] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000417] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000988] CPU: Testing write buffer coherency: ok
[    0.001742] Setting up static identity map for 0x42300000 - 0x42300060
[    0.001899] Hierarchical SRCU implementation.
[    0.002625] smp: Bringing up secondary CPUs ...
[    0.004432] smp: Brought up 1 node, 2 CPUs
[    0.004452] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.004464] CPU: All CPU(s) started in SVC mode.
[    0.014770] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.014932] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014958] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015074] pinctrl core: initialized pinctrl subsystem
[    0.016048] NET: Registered protocol family 16
[    0.016297] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.017616] cpuidle: using governor ladder
[    0.017677] cpuidle: using governor menu
[    0.038501] msm_bus_fabric_init_driver
[    0.039906] usbcore: registered new interface driver usbfs
[    0.040006] usbcore: registered new interface driver hub
[    0.040094] usbcore: registered new device driver usb
[    0.040149] pps_core: LinuxPPS API ver. 1 registered
[    0.040163] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.040195] PTP clock support registered
[    0.042035] clocksource: Switched to clocksource dg_timer
[    0.045281] NET: Registered protocol family 2
[    0.045868] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.045911] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.045967] TCP: Hash tables configured (established 4096 bind 4096)
[    0.046057] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.046082] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.046274] NET: Registered protocol family 1
[    0.046322] PCI: CLS 0 bytes, default 64
[    0.047418] No memory allocated for crashlog
[    0.047684] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.052861] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.052877] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.062284] io scheduler noop registered
[    0.062304] io scheduler deadline registered (default)
[    0.064033] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.064143] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.064240] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.065082] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[    0.065129] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.065156] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.172961] qcom-pcie 1b500000.pci: link up
[    0.173140] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.173164] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.173184] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.173200] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.173218] pci_bus 0000:00: scanning bus
[    0.173263] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.173351] pci 0000:00:00.0: calling 0xc030d3c0
[    0.173422] pci 0000:00:00.0: supports D1
[    0.173438] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.173455] pci 0000:00:00.0: PME# disabled
[    0.173710] pci_bus 0000:00: fixups for bus
[    0.173733] PCI: bus0: Fast back to back transfers disabled
[    0.173755] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.173885] pci_bus 0000:01: scanning bus
[    0.174059] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.174410] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.174874] pci 0000:01:00.0: calling 0xc030d3c0
[    0.175516] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.175557] pci 0000:01:00.0: PME# disabled
[    0.175881] pci_bus 0000:01: fixups for bus
[    0.175954] PCI: bus1: Fast back to back transfers disabled
[    0.175972] pci_bus 0000:01: bus scan returning with max=01
[    0.175991] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.176008] pci_bus 0000:00: bus scan returning with max=ff
[    0.176057] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.176082] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.176211] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.176235] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.176268] pci 0000:00:00.0: calling 0xc05542fc
[    0.176463] pcieport 0000:00:00.0: assign IRQ: got 66
[    0.176786] pcieport 0000:00:00.0: AER enabled with IRQ 34
[    0.176899] pci 0000:01:00.0: calling 0xc05542fc
[    0.177328] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    0.177426] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.177530] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.178338] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[    0.178376] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.178400] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.288360] qcom-pcie 1b700000.pci: link up
[    0.288506] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.288527] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.288542] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.288557] pci_bus 0001:00: scanning bus
[    0.288596] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.288668] pci 0001:00:00.0: calling 0xc030d3c0
[    0.288729] pci 0001:00:00.0: supports D1
[    0.288741] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.288756] pci 0001:00:00.0: PME# disabled
[    0.288993] pci_bus 0001:00: fixups for bus
[    0.289012] PCI: bus0: Fast back to back transfers disabled
[    0.289031] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.289148] pci_bus 0001:01: scanning bus
[    0.289334] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.289706] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.290205] pci 0001:01:00.0: calling 0xc030d3c0
[    0.290898] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.290941] pci 0001:01:00.0: PME# disabled
[    0.291283] pci_bus 0001:01: fixups for bus
[    0.291360] PCI: bus1: Fast back to back transfers disabled
[    0.291377] pci_bus 0001:01: bus scan returning with max=01
[    0.291394] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.291411] pci_bus 0001:00: bus scan returning with max=ff
[    0.291449] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.291471] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.291603] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.291624] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.291654] pci 0001:00:00.0: calling 0xc05542fc
[    0.291831] pcieport 0001:00:00.0: assign IRQ: got 99
[    0.292130] pcieport 0001:00:00.0: AER enabled with IRQ 67
[    0.292363] pci 0001:01:00.0: calling 0xc05542fc
[    0.294536] L2 @ QSB rate. Forcing new rate.
[    0.294750] L2 @ 384000 KHz
[    0.294919] CPU0 @ 800000 KHz
[    0.294933] CPU1 @ QSB rate. Forcing new rate.
[    0.295052] CPU1 @ 384000 KHz
[    0.298948] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.300358] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[    0.301814] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.304555] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.304667] msm_serial 16340000.serial: uartclk = 7372800
[    0.304749] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
[    0.304786] msm_serial: console setup on port #0
[    1.033550] console [ttyMSM0] enabled
[    1.038264] msm_serial: driver initialized
[    1.046886] loop: module loaded
[    1.048362] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.050254] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
[    1.056512] 25 fixed-partitions partitions found on MTD device spi0.0
[    1.061166] Creating 25 MTD partitions on "spi0.0":
[    1.067582] 0x000000000000-0x000000020000 : "SBL1"
[    1.073118] 0x000000020000-0x000000040000 : "MIBIB"
[    1.077798] 0x000000040000-0x000000060000 : "SBL2"
[    1.082639] 0x000000060000-0x000000090000 : "SBL3"
[    1.087420] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
[    1.092210] 0x0000000a0000-0x0000000b0000 : "SSD"
[    1.097420] 0x0000000b0000-0x0000000e0000 : "TZ"
[    1.102164] 0x0000000e0000-0x000000100000 : "RPM"
[    1.106954] 0x000000100000-0x000000170000 : "fs-uboot"
[    1.111460] 0x000000170000-0x0000001b0000 : "uboot-env"
[    1.116590] 0x0000001b0000-0x0000001f0000 : "radio"
[    1.121638] 0x0000001f0000-0x0000005f0000 : "os-image"
[    1.126559] 0x0000005f0000-0x000001ef0000 : "rootfs"
[    1.131678] mtd: device 12 (rootfs) set to be root filesystem
[    1.136925] 1 squashfs-split partitions found on MTD device rootfs
[    1.141747] 0x000000bf0000-0x000001ef0000 : "rootfs_data"
[    1.149195] 0x000001ef0000-0x000001ef0200 : "default-mac"
[    1.154512] 0x000001ef0200-0x000001ef0400 : "pin"
[    1.159756] 0x000001ef0400-0x000001f00000 : "product-info"
[    1.164560] 0x000001f00000-0x000001f10000 : "partition-table"
[    1.169800] 0x000001f10000-0x000001f20000 : "soft-version"
[    1.175781] 0x000001f20000-0x000001f30000 : "support-list"
[    1.181016] 0x000001f30000-0x000001f40000 : "profile"
[    1.186655] 0x000001f40000-0x000001f50000 : "default-config"
[    1.191612] 0x000001f50000-0x000001f90000 : "user-config"
[    1.197467] 0x000001f90000-0x000001fd0000 : "qos-db"
[    1.202784] 0x000001fd0000-0x000001fe0000 : "usb-config"
[    1.207678] 0x000001fe0000-0x000002000000 : "log"
[    1.214466] libphy: GPIO Bitbanged MDIO: probed
[    1.240013] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    2.097651] libphy: Fixed MDIO Bus: probed
[    2.100098] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    2.101099] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.107275] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    2.112274] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    2.118286] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    2.126344] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    2.133903] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    2.140854] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    2.148834] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    2.154644] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    2.161949] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.171240] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    2.177677] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.183733] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    2.188681] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    2.194851] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    2.202816] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    2.210295] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    2.217405] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    2.225308] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    2.231043] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    2.238494] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.246240] i2c /dev entries driver
[    2.255088] Calibration not found.
[    2.256995] qcom-tsens 900000.thermal-sensor: tsens calibration failed
[    2.262144] Speed bin: 0
[    2.267087] PVS bin: 1
[    2.271469] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.271938] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.279865] sdhci: Secure Digital Host Controller Interface driver
[    2.286407] sdhci: Copyright(c) Pierre Ossman
[    2.292655] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.299319] NET: Registered protocol family 10
[    2.304778] Segment Routing with IPv6
[    2.307104] NET: Registered protocol family 17
[    2.310801] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.315737] 8021q: 802.1Q VLAN Support v1.8
[    2.328353] Registering SWP/SWPB emulation handler
[    2.349071] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    2.362601] s1a: supplied by regulator-dummy
[    2.362725] s1a: Bringing 0uV into 1050000-1050000uV
[    2.366357] s1b: supplied by regulator-dummy
[    2.370969] s1b: Bringing 0uV into 1050000-1050000uV
[    2.375633] s2a: supplied by regulator-dummy
[    2.380187] s2a: Bringing 0uV into 800000-800000uV
[    2.384810] s2b: supplied by regulator-dummy
[    2.389025] s2b: Bringing 0uV into 800000-800000uV
[    2.399500] hctosys: unable to open rtc device (rtc0)
[    2.408112] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[    2.408947] Freeing unused kernel memory: 1024K
[    2.434130] random: fast init done
[    3.096641] random: crng init done
[    3.292267] init: Console is alive
[    3.292475] init: - watchdog -
[    6.170161] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.369526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.372363] SCSI subsystem initialized
[    6.378119] libata version 3.00 loaded.
[    6.382526] ehci-platform: EHCI generic platform driver
[    6.386499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.387178] ohci-platform: OHCI generic platform driver
[    6.519330] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.519415] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.524135] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[    6.531368] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000
[    6.541436] hub 1-0:1.0: USB hub found
[    6.547059] hub 1-0:1.0: 1 port detected
[    6.550659] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.554614] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.559830] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    6.567537] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.574378] hub 2-0:1.0: USB hub found
[    6.582393] hub 2-0:1.0: 1 port detected
[    6.586112] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.589956] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    6.595453] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[    6.602892] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000
[    6.613109] hub 3-0:1.0: USB hub found
[    6.618705] hub 3-0:1.0: 1 port detected
[    6.622391] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.626083] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    6.631432] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    6.639206] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.645922] hub 4-0:1.0: USB hub found
[    6.653935] hub 4-0:1.0: 1 port detected
[    6.659989] usbcore: registered new interface driver usb-storage
[    6.661994] usbcore: registered new interface driver uas
[    6.667659] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.681540] init: - preinit -
[    9.450501] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[    9.452276] dwmac1000: Master AXI performs any burst length
[    9.459518] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    9.465134] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    9.474915] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.562500] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   10.562566] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   12.649234] mount_root: loading kmods from internal overlay
[   12.681629] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   12.685992] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   15.859049] jffs2: notice: (144) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (3 unchecked, 17 orphan) and 52 of xref (17 dead, 5 orphan) found.
[   15.860671] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   15.909041] block: extroot: not configured
[   16.215378] jffs2: notice: (142) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (3 unchecked, 17 orphan) and 52 of xref (17 dead, 5 orphan) found.
[   16.223589] mount_root: loading kmods from internal overlay
[   16.261547] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   16.275431] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   18.553600] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   18.572801] block: extroot: not configured
[   18.625236] mount_root: switching to jffs2 overlay
[   18.675960] overlayfs: upper fs does not support tmpfile.
[   18.692496] urandom-seed: Seeding with /etc/urandom.seed
[   18.878689] procd: - early -
[   18.878843] procd: - watchdog -
[   19.602337] procd: - watchdog -
[   19.602569] procd: - ubus -
[   19.826860] procd: - init -
[   20.209597] kmodloader: loading kernel modules from /etc/modules.d/*
[   20.218040] Key type dns_resolver registered
[   20.224209] RPC: Registered named UNIX socket transport module.
[   20.224232] RPC: Registered udp transport module.
[   20.228924] RPC: Registered tcp transport module.
[   20.233854] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.243270] tun: Universal TUN/TAP device driver, 1.6
[   20.248089] gre: GRE over IPv4 demultiplexor driver
[   20.250474] ip_gre: GRE over IPv4 tunneling driver
[   20.263678] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.268467]  Hooked IMQ after mangle on PREROUTING
[   20.269090]  Hooked IMQ after nat on POSTROUTING
[   20.273767] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[   20.278469]  Hooking IMQ before NAT on PREROUTING.
[   20.287637]  Hooking IMQ after NAT on POSTROUTING.
[   20.301872] u32 classifier
[   20.301899]     input device check on
[   20.303571]     Actions configured
[   20.308538] Mirror/redirect action on
[   20.327420] fuse init (API version 7.26)
[   20.333256] usbcore: registered new interface driver cdc_acm
[   20.333282] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   20.338715] usbcore: registered new interface driver cdc_wdm
[   20.346340] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   20.351608] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   20.365253] Ebtables v2.0 registered
[   20.367540] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.378113] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   20.472793] usbcore: registered new interface driver ums-alauda
[   20.474611] usbcore: registered new interface driver ums-cypress
[   20.478686] usbcore: registered new interface driver ums-datafab
[   20.484852] usbcore: registered new interface driver ums-freecom
[   20.491165] usbcore: registered new interface driver ums-isd200
[   20.501168] usbcore: registered new interface driver ums-jumpshot
[   20.503398] usbcore: registered new interface driver ums-karma
[   20.510118] usbcore: registered new interface driver ums-sddr09
[   20.515066] usbcore: registered new interface driver ums-sddr55
[   20.520874] usbcore: registered new interface driver ums-usbat
[   20.526085] usbcore: registered new interface driver usblp
[   20.538080] usbcore: registered new interface driver usbserial
[   20.538170] usbcore: registered new interface driver usbserial_generic
[   20.543024] usbserial: USB Serial support registered for generic
[   20.577373] xt_time: kernel timezone is -0000
[   20.578768] usbcore: registered new interface driver cdc_ether
[   20.583020] usbcore: registered new interface driver cdc_ncm
[   20.621659] usbcore: registered new interface driver huawei_cdc_ncm
[   20.811664] PPP generic driver version 2.4.2
[   20.813030] NET: Registered protocol family 24
[   20.816054] PPTP driver version 0.8.5
[   20.820671] usbcore: registered new interface driver qmi_wwan
[   20.824932] usbcore: registered new interface driver rndis_host
[   20.829756] usbcore: registered new interface driver sierra
[   20.834617] usbserial: USB Serial support registered for Sierra USB modem
[   20.841396] usbcore: registered new interface driver sierra_net
[   20.860479] ath10k_pci 0000:01:00.0: assign IRQ: got 66
[   20.861061] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[   20.861158] ath10k_pci 0000:01:00.0: enabling bus mastering
[   20.861683] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   21.040476] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[   21.040530] ath10k_pci 0000:01:00.0: Falling back to user helper
[   36.217971] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   36.734070] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   36.734103] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   36.743857] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[   36.818415] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
[   38.092207] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   38.175272] ath: EEPROM regdomain: 0x0
[   38.175281] ath: EEPROM indicates default country code should be used
[   38.175288] ath: doing EEPROM country->regdmn map search
[   38.175302] ath: country maps to regdmn code: 0x3a
[   38.175312] ath: Country alpha2 being used: US
[   38.175318] ath: Regpair used: 0x3a
[   38.179283] ath10k_pci 0001:01:00.0: assign IRQ: got 99
[   38.180107] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   38.180244] ath10k_pci 0001:01:00.0: enabling bus mastering
[   38.180890] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   38.366268] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[   38.366306] ath10k_pci 0001:01:00.0: Falling back to user helper
[   38.674548] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   38.674741] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   38.682521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   38.693884] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[   38.758645] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
[   40.038244] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   40.125831] ath: EEPROM regdomain: 0x0
[   40.125842] ath: EEPROM indicates default country code should be used
[   40.125851] ath: doing EEPROM country->regdmn map search
[   40.125866] ath: country maps to regdmn code: 0x3a
[   40.125877] ath: Country alpha2 being used: US
[   40.125884] ath: Regpair used: 0x3a
[   40.131675] usbcore: registered new interface driver cdc_mbim
[   40.133365] usbcore: registered new interface driver option
[   40.136532] usbserial: USB Serial support registered for GSM modem (1-port)
[   40.146324] usbcore: registered new interface driver qcserial
[   40.148848] usbserial: USB Serial support registered for Qualcomm USB modem
[   40.155035] kmodloader: done loading kernel modules from /etc/modules.d/*
[   45.453696] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[   45.454460] dwmac1000: Master AXI performs any burst length
[   45.462677] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   45.468056] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   45.477173] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   45.493221] br-lan: port 1(eth1.1) entered blocking state
[   45.493248] br-lan: port 1(eth1.1) entered disabled state
[   45.497773] device eth1.1 entered promiscuous mode
[   45.503036] device eth1 entered promiscuous mode
[   45.510537] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   45.529281] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[   45.530045] dwmac1000: Master AXI performs any burst length
[   45.538260] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   45.543762] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   45.553071] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.552455] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   46.554317] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   46.560969] br-lan: port 1(eth1.1) entered blocking state
[   46.566475] br-lan: port 1(eth1.1) entered forwarding state
[   46.612045] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   46.613589] ath: EEPROM regdomain: 0x8268
[   46.613593] ath: EEPROM indicates we should expect a country code
[   46.613597] ath: doing EEPROM country->regdmn map search
[   46.613602] ath: country maps to regdmn code: 0x37
[   46.613607] ath: Country alpha2 being used: PL
[   46.613610] ath: Regpair used: 0x37
[   46.613616] ath: regdomain 0x8268 dynamically updated by user
[   46.613636] ath: EEPROM regdomain: 0x8268
[   46.613639] ath: EEPROM indicates we should expect a country code
[   46.613644] ath: doing EEPROM country->regdmn map search
[   46.613647] ath: country maps to regdmn code: 0x37
[   46.613650] ath: Country alpha2 being used: PL
[   46.613653] ath: Regpair used: 0x37
[   46.613656] ath: regdomain 0x8268 dynamically updated by user
[   46.632470] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   46.632524] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   49.884319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   51.300631] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   51.301727] br-lan: port 2(wlan1) entered blocking state
[   51.305490] br-lan: port 2(wlan1) entered disabled state
[   51.311391] device wlan1 entered promiscuous mode
[   51.320257] br-lan: port 3(wlan0) entered blocking state
[   51.320816] br-lan: port 3(wlan0) entered disabled state
[   51.326574] device wlan0 entered promiscuous mode
[   52.132035] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.132234] br-lan: port 3(wlan0) entered blocking state
[   52.137599] br-lan: port 3(wlan0) entered forwarding state
[   52.143148] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.148198] br-lan: port 2(wlan1) entered blocking state
[   52.154685] br-lan: port 2(wlan1) entered forwarding state

Generalnie problem ze znikającą tablicą NAT nie zawęża się tylko do modemu ale jest szerszy.
Kolejny test który przeprowadziłem polegał na ustawieniu WAN na inny router wifi.
W tej konfiguracji również tablica pojawiała się i znikała po kolejnych restartach.

Poniżej oba przypadki ok i nok na Gargoyle.

    1. iptables (NOK)

root@Gargoyle:~# iptables -L -t nat
iptables v1.6.2: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
root@Gargoyle:~#
root@Gargoyle:~# cat /etc/modules.d/ipt-nat
xt_nat
iptable_nat
ipt_MASQUERADE
xt_REDIRECT
root@Gargoyle:~#

    2. iptables (OK)
root@Gargoyle:~# cat /etc/modules.d/ipt-nat
xt_nat
iptable_nat
ipt_MASQUERADE
xt_REDIRECT
root@Gargoyle:~#
root@Gargoyle:~# iptables -L -t nat | tail
prerouting_lan_rule  all  --  anywhere             anywhere             /* !fw3: Custom lan prerouting rule chain */

Chain zone_wan_postrouting (1 references)
target     prot opt source               destination
postrouting_wan_rule  all  --  anywhere             anywhere             /* !fw3: Custom wan postrouting rule chain */
MASQUERADE  all  --  anywhere             anywhere             /* !fw3 */

Chain zone_wan_prerouting (1 references)
target     prot opt source               destination
prerouting_wan_rule  all  --  anywhere             anywhere             /* !fw3: Custom wan prerouting rule chain */
root@Gargoyle:~#

Inny eksperyment.
Zainstalowałem OpenWrt 18.06 LuCi
/luci-18.06-snapshot-r7714-4918fe0291-ipq806x-tplink_c2600-squashfs-sysupgrade.bin/

Tutaj nie ma takich problemów, tablica nie znika i wszystko wygląda ok.

openwrt(LuCi):  (nat OK)

    root@OpenWrt:~#  cat /etc/modules.d/ipt-nat
    xt_nat
    iptable_nat
    ipt_MASQUERADE
    xt_REDIRECT

Firmware maglowałem już kilka razy, a te zrzuty z dzisiaj to była nowa wrzuta fw. z openwrt na gargoyle więc przyczyną nie wydaje się by była jakaś wada przy wgrywaniu.