Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → LEDE n750 dhcp
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
Cześć, po dość długim okresie zaktualizowałem soft do LEDE Reboot 17.01-SNAPSHOT r3825-28483d4 i zauważyłem problem z dhcp'em gdy zmienię sobię domyślny adres lan ip na np. 192.168.2.1 to router dalej próbuje klientom przydzielać adresy z podsieci 192.168.1.x. Być może to ja mam zaćmienie, ale nie mam już pomysłu co może być nie tak.
W jaki sposób i gdzie zmieniasz adres ip? Zrestartowałeś dnsmasq?
Zmieniam tak jak robiłem to od zawsze, w sekcji lan:
config interface 'lan'
option type 'bridge'
option ifname 'eth0.1'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '192.168.2.1'Restart dnsmasq również był, do testów podłączyłem się telefonem i dostałem:
adres ip: 192.168.1.228
mask: 255.255.255.0
brama: 192.168.1.50
Więc zrestartuj cały router. Albo masz w lanie uruchomiony jeszcze jeden serwer dhcp.
Po restarcie tak samo, obraz czysty prosto od Ciebie.
Podłącz się telefonem a później pokaż wyniki poleceń:
ifconfig
cat /var/etc/dnsmasq*
logread
cat /tmp/dhcp.leases
root@LEDE:~# ifconfig
br-lan Link encap:Ethernet HWaddr 00:90:A9:0B:A5:0B
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::290:a9ff:fe0b:a50b/64 Scope:Link
inet6 addr: fd42:91a4:9528::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6108 errors:0 dropped:0 overruns:0 frame:0
TX packets:5992 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:549504 (536.6 KiB) TX bytes:4711439 (4.4 MiB)
eth0 Link encap:Ethernet HWaddr 00:90:A9:0B:A5:0B
inet6 addr: fe80::290:a9ff:fe0b:a50b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:714 errors:0 dropped:0 overruns:0 frame:0
TX packets:2503 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:61534 (60.0 KiB) TX bytes:202411 (197.6 KiB)
Interrupt:4
eth0.1 Link encap:Ethernet HWaddr 00:90:A9:0B:A5:0B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:714 errors:0 dropped:0 overruns:0 frame:0
TX packets:2474 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:48682 (47.5 KiB) TX bytes:189061 (184.6 KiB)
eth0.2 Link encap:Ethernet HWaddr 00:90:A9:0B:A5:0A
inet6 addr: fe80::290:a9ff:fe0b:a50a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:2322 (2.2 KiB)
eth1 Link encap:Ethernet HWaddr 0C:5B:8F:27:9A:64
inet addr:192.168.8.100 Bcast:192.168.8.255 Mask:255.255.255.0
inet6 addr: fe80::e5b:8fff:fe27:9a64/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4208 errors:0 dropped:0 overruns:0 frame:0
TX packets:2952 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3960777 (3.7 MiB) TX bytes:330978 (323.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:650 errors:0 dropped:0 overruns:0 frame:0
TX packets:650 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:42920 (41.9 KiB) TX bytes:42920 (41.9 KiB)
wlan0 Link encap:Ethernet HWaddr 00:90:A9:0B:A5:0B
inet6 addr: fe80::290:a9ff:fe0b:a50b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7591 errors:0 dropped:0 overruns:0 frame:0
TX packets:7299 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:742928 (725.5 KiB) TX bytes:5012465 (4.7 MiB)
wlan1 Link encap:Ethernet HWaddr 00:90:A9:0B:A5:0D
inet6 addr: fe80::290:a9ff:fe0b:a50d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:941 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:92200 (90.0 KiB)
root@LEDE:~# root@LEDE:~# cat /var/etc/dnsmasq*
# auto-generated config file from /etc/config/dhcp
conf-file=/etc/dnsmasq.conf
dhcp-authoritative
domain-needed
localise-queries
read-ethers
bogus-priv
expand-hosts
local-service
domain=lan
server=/lan/
dhcp-leasefile=/tmp/dhcp.leases
resolv-file=/tmp/resolv.conf.auto
stop-dns-rebind
rebind-localhost-ok
rebind-domain-ok=free.aero2.net.pl
dhcp-broadcast=tag:needs-broadcast
addn-hosts=/tmp/hosts
conf-dir=/tmp/dnsmasq.d
user=dnsmasq
group=dnsmasq
dhcp-range=lan,192.168.2.100,192.168.2.249,255.255.255.0,12h
no-dhcp-interface=eth1Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.000000] Linux version 4.4.112 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3785-ceea0ac) ) #0 Fri Jan 26 07:37:28 2018
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=00000000
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] SoC: Atheros AR9344 rev 2
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 0.000000] No valid device tree found, continuing without
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Zone ranges:
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Movable zone start for each node
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Early memory node ranges
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 804384d0, node_mem_map 81000000
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=MYNET-N750 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Memory: 124944K/131072K available (3122K kernel code, 162K rwdata, 780K rodata, 280K init, 205K bss, 6128K reserved, 0K cma-reserved)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] Clocks: CPU:560.000MHz, DDR:480.000MHz, AHB:240.000MHz, Ref:40.000MHz
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.008296] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.081137] pid_max: default: 32768 minimum: 301
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.086175] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.093230] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.103141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.113661] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.121320] NET: Registered protocol family 16
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.127482] MIPS: machine is WD My Net N750
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 0.159297] registering PCI controller with io_map_base unset
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.409374] PCI host bridge to bus 0000:00
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.413744] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.421102] pci_bus 0000:00: root bus resource [io 0x0000]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.427033] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.434267] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.442736] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
Thu Mar 8 18:25:32 2018 kern.err kernel: [ 0.442767] pci 0000:00:00.0: invalid calibration data
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.448275] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.448334] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.448402] pci 0000:00:00.0: supports D1
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.448419] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.448644] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.448679] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.456475] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.464194] pci 0000:00:00.0: using irq 40 for pin 1
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.470326] clocksource: Switched to clocksource MIPS
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.477025] NET: Registered protocol family 2
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.482563] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.489986] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.496797] TCP: Hash tables configured (established 1024 bind 1024)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.503646] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.509872] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.516845] NET: Registered protocol family 1
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 0.521602] PCI: CLS 0 bytes, default 32
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 0.526123] Crashlog allocated RAM at address 0x3f00000
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.546121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.552389] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.565301] io scheduler noop registered
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.569484] io scheduler deadline registered (default)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.575264] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.584757] console [ttyS0] disabled
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.608628] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.617817] console [ttyS0] enabled
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.625239] bootconsole [early0] disabled
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 0.638529] m25p80 spi0.0: found mx25l12805d, expected m25p80
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 0.644442] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.649595] 6 cmdlinepart partitions found on MTD device spi0.0
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.655615] Creating 6 MTD partitions on "spi0.0":
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.660499] 0x000000000000-0x000000040000 : "u-boot"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.667579] 0x000000040000-0x000000050000 : "u-boot-env"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.674559] 0x000000050000-0x000000060000 : "devdata"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.681278] 0x000000060000-0x000000070000 : "devconf"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.687944] 0x000000070000-0x000000ff0000 : "firmware"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.719301] 2 seama-fw partitions found on MTD device firmware
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.725256] 0x000000070040-0x0000001c0000 : "kernel"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.731672] 0x0000001c0000-0x000000ff0000 : "rootfs"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.738258] mtd: device 6 (rootfs) set to be root filesystem
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.744077] 1 squashfs-split partitions found on MTD device rootfs
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.750370] 0x000000660000-0x000000ff0000 : "rootfs_data"
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 0.757438] 0x000000ff0000-0x000001000000 : "radiocfg"
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 1.771727] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 2.382027] libphy: ag71xx_mdio: probed
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 3.968906] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 3.980394] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 3.988805] NET: Registered protocol family 10
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 3.997009] NET: Registered protocol family 17
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 4.001655] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 4.014608] 8021q: 802.1Q VLAN Support v1.8
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 4.020626] hctosys: unable to open rtc device (rtc0)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 4.030505] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 4.038869] Freeing unused kernel memory: 280K
Thu Mar 8 18:25:32 2018 user.info kernel: [ 5.104525] init: Console is alive
Thu Mar 8 18:25:32 2018 user.info kernel: [ 5.108179] init: - watchdog -
Thu Mar 8 18:25:32 2018 user.info kernel: [ 6.635244] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.771728] usbcore: registered new interface driver usbfs
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.777391] usbcore: registered new interface driver hub
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.782916] usbcore: registered new device driver usb
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 6.827800] SCSI subsystem initialized
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.837573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.845830] ehci-platform: EHCI generic platform driver
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.851285] ehci-platform ehci-platform: EHCI Host Controller
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.857161] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.867292] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.890365] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.897613] hub 1-0:1.0: USB hub found
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.901770] hub 1-0:1.0: 1 port detected
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 6.910251] usbcore: registered new interface driver usb-storage
Thu Mar 8 18:25:32 2018 user.info kernel: [ 6.917104] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Mar 8 18:25:32 2018 user.info kernel: [ 6.927363] init: - preinit -
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 7.400406] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 7.479950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 7.643683] hub 1-1:1.0: USB hub found
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 7.650559] hub 1-1:1.0: 4 ports detected
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 7.670824] random: procd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 7.940347] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 8.198695] usb-storage 1-1.2:1.2: USB Mass Storage device detected
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 8.205733] scsi host0: usb-storage 1-1.2:1.2
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 9.091583] eth0: link up (1000Mbps/Full duplex)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 9.096351] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 9.216181] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 9.229242] sd 0:0:0:0: [sda] Attached SCSI removable disk
Thu Mar 8 18:25:32 2018 user.info kernel: [ 9.788505] mount_root: loading kmods from internal overlay
Thu Mar 8 18:25:32 2018 user.info kernel: [ 9.830555] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Mar 8 18:25:32 2018 user.info kernel: [ 9.839126] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 10.124215] jffs2: notice: (461) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.140316] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.150580] block: extroot: not configured
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 10.194025] jffs2: notice: (458) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.378229] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.394831] block: extroot: not configured
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.399876] mount_root: switching to jffs2 overlay
Thu Mar 8 18:25:32 2018 user.warn kernel: [ 10.412379] urandom-seed: Seeding with /etc/urandom.seed
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 10.533797] eth0: link down
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.546740] procd: - early -
Thu Mar 8 18:25:32 2018 user.info kernel: [ 10.549762] procd: - watchdog -
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.127684] random: jshn: uninitialized urandom read (4 bytes read, 21 bits of entropy available)
Thu Mar 8 18:25:32 2018 user.info kernel: [ 11.292234] procd: - watchdog -
Thu Mar 8 18:25:32 2018 user.info kernel: [ 11.295684] procd: - ubus -
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.438671] random: jshn: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.692466] random: jshn: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.704060] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.720502] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.729832] random: ubus: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.739064] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.748597] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 kern.notice kernel: [ 11.762096] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar 8 18:25:32 2018 user.info kernel: [ 11.772000] procd: - init -
Thu Mar 8 18:25:32 2018 user.info kernel: [ 12.879624] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 12.930153] tun: Universal TUN/TAP device driver, 1.6
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 12.935336] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 12.972006] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.011988] fuse init (API version 7.23)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.026003] usbcore: registered new interface driver cdc_acm
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.031791] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.061948] usbcore: registered new interface driver cdc_wdm
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.082543] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.090709] Backport generated by backports.git backports-20160324-13-g24da7d3c
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.123095] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.147812] nf_conntrack version 0.5.0 (1956 buckets, 7824 max)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.249887] usbcore: registered new interface driver usblp
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.285259] usbcore: registered new interface driver usbserial
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.291333] usbcore: registered new interface driver usbserial_generic
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.298047] usbserial: USB Serial support registered for generic
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.354534] xt_time: kernel timezone is -0000
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.425681] cdc_ether 1-1.2:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.437182] usbcore: registered new interface driver cdc_ether
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.461585] usbcore: registered new interface driver cdc_ncm
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.527668] usbcore: registered new interface driver huawei_cdc_ncm
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.654002] PPP generic driver version 2.4.2
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.670284] NET: Registered protocol family 24
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.682708] usbcore: registered new interface driver qmi_wwan
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.702998] usbcore: registered new interface driver rndis_host
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.722650] usbcore: registered new interface driver sierra
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.728411] usbserial: USB Serial support registered for Sierra USB modem
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.752566] usbcore: registered new interface driver sierra_net
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.822629] usbcore: registered new interface driver cdc_mbim
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.844154] usbcore: registered new interface driver option
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.849908] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.885266] usbcore: registered new interface driver qcserial
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.891267] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.933593] ath: EEPROM regdomain: 0x0
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.933612] ath: EEPROM indicates default country code should be used
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.933623] ath: doing EEPROM country->regdmn map search
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.933644] ath: country maps to regdmn code: 0x3a
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.933655] ath: Country alpha2 being used: US
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.933665] ath: Regpair used: 0x3a
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.945776] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.950480] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Thu Mar 8 18:25:32 2018 kern.warn kernel: [ 13.957372] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.968489] ath: EEPROM regdomain: 0x0
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.968506] ath: EEPROM indicates default country code should be used
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.968516] ath: doing EEPROM country->regdmn map search
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.968537] ath: country maps to regdmn code: 0x3a
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.968548] ath: Country alpha2 being used: US
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.968558] ath: Regpair used: 0x3a
Thu Mar 8 18:25:32 2018 kern.debug kernel: [ 13.978636] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Thu Mar 8 18:25:32 2018 kern.info kernel: [ 13.983396] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=40
Thu Mar 8 18:25:32 2018 user.info kernel: [ 14.070766] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Mar 8 18:25:35 2018 user.notice : Added device handler type: 8021ad
Thu Mar 8 18:25:35 2018 user.notice : Added device handler type: 8021q
Thu Mar 8 18:25:35 2018 user.notice : Added device handler type: macvlan
Thu Mar 8 18:25:35 2018 user.notice : Added device handler type: bridge
Thu Mar 8 18:25:35 2018 user.notice : Added device handler type: Network device
Thu Mar 8 18:25:35 2018 user.notice : Added device handler type: tunnel
Thu Mar 8 18:25:36 2018 daemon.err block: /dev/mtdblock6 is already mounted on /rom
Thu Mar 8 18:25:36 2018 daemon.err block: /dev/mtdblock7 is already mounted on /overlay
Thu Mar 8 18:25:37 2018 authpriv.info dropbear[1159]: Not backgrounding
Thu Mar 8 18:25:41 2018 kern.info kernel: [ 25.415198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Mar 8 18:25:41 2018 kern.info kernel: [ 25.435229] device eth0.1 entered promiscuous mode
Thu Mar 8 18:25:41 2018 kern.info kernel: [ 25.440102] device eth0 entered promiscuous mode
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 8 18:25:41 2018 kern.info kernel: [ 25.457175] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 8 18:25:41 2018 kern.err kernel: [ 25.517527] cdc_ether 1-1.2:1.0 eth1: kevent 12 may have been dropped
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'wan' is enabled
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Mar 8 18:25:41 2018 kern.info kernel: [ 25.533723] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Thu Mar 8 18:25:41 2018 daemon.info odhcpd[1110]: Raising SIGUSR1 due to address change on br-lan
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Network device 'eth1' link is up
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Mar 8 18:25:41 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Mar 8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: started, v1.25.1
Thu Mar 8 18:25:42 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Thu Mar 8 18:25:42 2018 daemon.notice odhcpd[1110]: Failed to send to ff02::1%br-lan (Address not available)
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050530] ath: EEPROM regdomain: 0x8268
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050551] ath: EEPROM indicates we should expect a country code
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050566] ath: doing EEPROM country->regdmn map search
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050580] ath: country maps to regdmn code: 0x37
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050593] ath: Country alpha2 being used: PL
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050603] ath: Regpair used: 0x37
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050616] ath: regdomain 0x8268 dynamically updated by user
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050703] ath: EEPROM regdomain: 0x8268
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050713] ath: EEPROM indicates we should expect a country code
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050727] ath: doing EEPROM country->regdmn map search
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050739] ath: country maps to regdmn code: 0x37
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050750] ath: Country alpha2 being used: PL
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050760] ath: Regpair used: 0x37
Thu Mar 8 18:25:42 2018 kern.debug kernel: [ 27.050772] ath: regdomain 0x8268 dynamically updated by user
Thu Mar 8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: sending discover
Thu Mar 8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: sending select for 192.168.8.100
Thu Mar 8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: lease of 192.168.8.100 obtained, lease time 86400
Thu Mar 8 18:25:42 2018 daemon.notice netifd: radio0 (1244): sh: acs_survey: out of range
Thu Mar 8 18:25:43 2018 kern.info kernel: [ 27.351656] eth0: link up (1000Mbps/Full duplex)
Thu Mar 8 18:25:43 2018 kern.info kernel: [ 27.356430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Mar 8 18:25:43 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar 8 18:25:43 2018 kern.info kernel: [ 27.423737] br-lan: port 1(eth0.1) entered forwarding state
Thu Mar 8 18:25:43 2018 kern.info kernel: [ 27.429452] br-lan: port 1(eth0.1) entered forwarding state
Thu Mar 8 18:25:43 2018 kern.info kernel: [ 27.435253] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Thu Mar 8 18:25:43 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Mar 8 18:25:43 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Mar 8 18:25:43 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Mar 8 18:25:43 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Mar 8 18:25:43 2018 daemon.notice netifd: bridge 'br-lan' link is up
Thu Mar 8 18:25:43 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Mar 8 18:25:43 2018 kern.info kernel: [ 27.580435] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar 8 18:25:43 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 8 18:25:43 2018 daemon.notice netifd: Interface 'wan' is now up
Thu Mar 8 18:25:44 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Thu Mar 8 18:25:44 2018 daemon.notice odhcpd[1110]: Failed to send to ff02::1%br-lan (Address not available)
Thu Mar 8 18:25:45 2018 kern.info kernel: [ 29.420353] br-lan: port 1(eth0.1) entered forwarding state
Thu Mar 8 18:25:45 2018 daemon.err odhcp6c[1436]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Mar 8 18:25:45 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Mar 8 18:25:46 2018 kern.info kernel: [ 30.338990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar 8 18:25:46 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Thu Mar 8 18:25:46 2018 kern.info kernel: [ 30.407549] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Thu Mar 8 18:25:46 2018 kern.info kernel: [ 30.474267] device wlan0 entered promiscuous mode
Thu Mar 8 18:25:46 2018 kern.info kernel: [ 30.498424] device wlan1 entered promiscuous mode
Thu Mar 8 18:25:46 2018 kern.info kernel: [ 30.503362] br-lan: port 3(wlan1) entered forwarding state
Thu Mar 8 18:25:46 2018 kern.info kernel: [ 30.508956] br-lan: port 3(wlan1) entered forwarding state
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: wlan0: ACS-STARTED
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Thu Mar 8 18:25:46 2018 daemon.notice hostapd: wlan1: ACS-STARTED
Thu Mar 8 18:25:47 2018 kern.info kernel: [ 31.340450] br-lan: port 3(wlan1) entered disabled state
Thu Mar 8 18:25:48 2018 daemon.info procd: - init complete -
Thu Mar 8 18:25:49 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Mar 12 21:05:03 2018 user.notice ddns-scripts[1801]: myddns_ipv4: PID '1801' started at 2018-03-12 21:05
Mon Mar 12 21:05:03 2018 user.warn ddns-scripts[1801]: myddns_ipv4: Service section disabled! - TERMINATE
Mon Mar 12 21:05:03 2018 user.warn ddns-scripts[1801]: myddns_ipv4: PID '1801' exit WITH ERROR '1' at 2018-03-12 21:05
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: started, version 2.78 cachesize 150
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: DNS service limited to local subnets
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq-dhcp[1896]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using local addresses only for domain lan
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: reading /tmp/resolv.conf.auto
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using local addresses only for domain lan
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using nameserver 192.168.8.1#53
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using nameserver 192.168.8.1#53
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: read /etc/hosts - 4 addresses
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/odhcpd - 0 addresses
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq-dhcp[1896]: read /etc/ethers - 0 addresses
Mon Mar 12 21:05:06 2018 daemon.notice hostapd: wlan0: ACS-COMPLETED freq=2412 channel=1
Mon Mar 12 21:05:06 2018 daemon.notice hostapd: wlan0: interface state ACS->HT_SCAN
Mon Mar 12 21:05:08 2018 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=1 sec=5 based on overlapping BSSes
Mon Mar 12 21:05:08 2018 daemon.err hostapd: Using interface wlan0 with hwaddr 00:90:a9:0b:a5:0b and ssid "WD-N750"
Mon Mar 12 21:05:08 2018 kern.info kernel: [ 39.766015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Mar 12 21:05:08 2018 kern.info kernel: [ 39.772670] br-lan: port 2(wlan0) entered forwarding state
Mon Mar 12 21:05:08 2018 kern.info kernel: [ 39.778312] br-lan: port 2(wlan0) entered forwarding state
Mon Mar 12 21:05:08 2018 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Mon Mar 12 21:05:08 2018 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Mar 12 21:05:08 2018 daemon.notice netifd: Network device 'wlan0' link is up
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=5220 channel=44
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: interface state ACS->HT_SCAN
Mon Mar 12 21:05:10 2018 daemon.err hostapd: Using interface wlan1 with hwaddr 00:90:a9:0b:a5:0d and ssid "WD-N750-5GHz"
Mon Mar 12 21:05:10 2018 kern.info kernel: [ 41.770343] br-lan: port 2(wlan0) entered forwarding state
Mon Mar 12 21:05:10 2018 kern.info kernel: [ 41.951357] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Mon Mar 12 21:05:10 2018 kern.info kernel: [ 41.958005] br-lan: port 3(wlan1) entered forwarding state
Mon Mar 12 21:05:10 2018 kern.info kernel: [ 41.963670] br-lan: port 3(wlan1) entered forwarding state
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: AP-ENABLED
Mon Mar 12 21:05:10 2018 daemon.notice netifd: Network device 'wlan1' link is up
Mon Mar 12 21:05:11 2018 daemon.info hostapd: wlan0: STA 80:ea:23:12:ca:60 IEEE 802.11: authenticated
Mon Mar 12 21:05:11 2018 daemon.info hostapd: wlan0: STA 80:ea:23:12:ca:60 IEEE 802.11: associated (aid 1)
Mon Mar 12 21:05:11 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 80:ea:23:12:ca:60
Mon Mar 12 21:05:11 2018 daemon.info hostapd: wlan0: STA 80:ea:23:12:ca:60 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:12 2018 kern.info kernel: [ 43.960361] br-lan: port 3(wlan1) entered forwarding state
Mon Mar 12 21:05:14 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:14 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:14 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:05:15 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:15 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:05:16 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 IEEE 802.11: authenticated
Mon Mar 12 21:05:16 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 IEEE 802.11: associated (aid 2)
Mon Mar 12 21:05:16 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 74:2f:68:9d:4d:a4
Mon Mar 12 21:05:16 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:16 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.2.161 74:2f:68:9d:4d:a4
Mon Mar 12 21:05:16 2018 daemon.info dnsmasq-dhcp[1896]: DHCPACK(br-lan) 192.168.2.161 74:2f:68:9d:4d:a4 bartekk
Mon Mar 12 21:05:17 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:17 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:05:18 2018 kern.notice kernel: [ 49.317371] random: nonblocking pool is initialized
Mon Mar 12 21:05:19 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:19 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:19 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 000494bb969ec98f8fe3c27ecbab5bacd832 on br-lan: ok fd42:91a4:9528::1ce/128
Mon Mar 12 21:05:20 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:21 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:21 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:05:25 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 IEEE 802.11: authenticated
Mon Mar 12 21:05:25 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 IEEE 802.11: associated (aid 3)
Mon Mar 12 21:05:25 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 10:2a:b3:7b:2e:18
Mon Mar 12 21:05:25 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:26 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPDISCOVER(br-lan) 10:2a:b3:7b:2e:18
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPOFFER(br-lan) 192.168.2.228 10:2a:b3:7b:2e:18
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.1.228 10:2a:b3:7b:2e:18
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPNAK(br-lan) 192.168.1.228 10:2a:b3:7b:2e:18 wrong server-ID
Mon Mar 12 21:05:29 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:29 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:05:30 2018 daemon.info hostapd: wlan0: STA 74:23:44:a8:e8:c1 IEEE 802.11: authenticated
Mon Mar 12 21:05:30 2018 daemon.info hostapd: wlan0: STA 74:23:44:a8:e8:c1 IEEE 802.11: associated (aid 4)
Mon Mar 12 21:05:30 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 74:23:44:a8:e8:c1
Mon Mar 12 21:05:30 2018 daemon.info hostapd: wlan0: STA 74:23:44:a8:e8:c1 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:31 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPDISCOVER(br-lan) 74:23:44:a8:e8:c1
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPOFFER(br-lan) 192.168.2.222 74:23:44:a8:e8:c1
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.1.222 74:23:44:a8:e8:c1
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPNAK(br-lan) 192.168.1.222 74:23:44:a8:e8:c1 wrong server-ID
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq[1896]: read /etc/hosts - 4 addresses
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/odhcpd - 0 addresses
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq-dhcp[1896]: read /etc/ethers - 0 addresses
Mon Mar 12 21:05:41 2018 daemon.warn dnsmasq[1896]: nameserver 192.168.8.1 refused to do a recursive query
Mon Mar 12 21:05:45 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:45 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:06:16 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:06:16 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:06:27 2018 authpriv.info dropbear[2721]: Child connection from 192.168.2.161:36616
Mon Mar 12 21:06:30 2018 authpriv.notice dropbear[2721]: Password auth succeeded for 'root' from 192.168.2.161:36616
Mon Mar 12 21:07:14 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:07:14 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:09:23 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:09:23 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:10:10 2018 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 74:23:44:a8:e8:c1
Mon Mar 12 21:10:21 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:11:15 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:11:15 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128
Mon Mar 12 21:13:08 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:13:08 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 root@LEDE:~# cat /tmp/dhcp.leases
1520928316 74:2f:68:9d:4d:a4 192.168.2.161 bartekk ff:f8:03:89:63:00:02:00:00:ab:11:38:49:a7:1c:a9:87:5c:5bWięc...
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPDISCOVER(br-lan) 74:23:44:a8:e8:c1
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPOFFER(br-lan) 192.168.2.222 74:23:44:a8:e8:c1
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.1.222 74:23:44:a8:e8:c1
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPNAK(br-lan) 192.168.1.222 74:23:44:a8:e8:c1 wrong server-IDRouter działa dobrze i dostarcza adres taki jak trzeba. To klient odrzuca przydział. Twój telefon z jakiegoś powodu koniecznie chce adres 192.168.1.x, router mówi mu nie, ale jak widać został zignorowany.
Wszędzie w klientach jest wymuszone dhcp, nic w tej kwestii nie było zmieniane. Spróbuje najwyżej skompilować latesta i na nim sprawdzić. Dzięki za pomoc.
Ale ty nie masz nic kompilować. Sprawdź dlaczego klient uparcie chce stary adres (lub coś ustawiłeś w nim).
Nie zmieniałem nic na klientach. Od czasu aktualizacji I zmianie adresu klienci nie otrzymują poprawnych adresów. Gdy zmienię na defaultowy to wszystko wraca do normy. Gdyby taki objaw był tylko na omawianym telefonie to szukał bym na nim przyczyny, ale nie nieprawidłowa adresacja dotyczy wszystkiego, od laptopów po telewizory.
Nie musisz mi wierzyć, masz w logach przydział adresów, więc sobie wygoogluj co te opisy znaczą. Klienci ci robią problem bo chcą poprzedni adres który miały.
Problem namierzony, nie dawało mi to spokoju i mimo, że po ustawieniu ręcznych adresów wszystko chodziło to przeanalizowałem jeszcze raz logi i tknęło mnie coś przy
user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to overridePrzypomniałem sobie, że na dachu mam podłączonego wt3020, który jest kombajnem dla mojej stacji pogodowej. Po odłączeniu go od głównego routera tj. n750 server dhcp w końcu zaczął przydzielać poprawne adresy.
Post 4...
To tak stabilnie na tym dachu działa, że zapomniałem, że coś tam jest w ogóle.
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → LEDE n750 dhcp
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc