1 Temat przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Temat: brak interfejsu wireless

podkusiło mnie zainstalować LEDE na tym sprzęcie:

http://eko.one.pl/forum/viewtopic.php?p … 17#p143617

po uruchomieniu doinstalowałem luci i skonfigurowałem wszystko poza wifi.
na innym sprzęcie konfiguracja wifi w luci jest spod network -> wireless; w mnie nie ma takiej opcji w ogóle.
uci show wireless nic nie zwraca.

próbowałem też zainstalować OpenWRT Cezarego z czerwca (luci-15.05-lantiq-xrx200-P2812HNUF1-squashfs-sysupgrade.tar), ale z poziomu Luci dostaję komunikat, że format pliku jest nie wspierany.

jakie kroki podjąć, aby albo mieć wifi na LEDE albo wgrać starsze openWRT?

pozdrawiam,
geos

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Sterowniki od wifi zainstalowałeś w ogóle?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

kurcze.. chyba nie, wgralem po prostu LEDE stable tak jak np. do WDR-4900. jak się nazywa pakiet ze sterownikami wifi dla tego sprzętu? szukałem opkg search *wireles*, wyskoczylo kmod-cfg80211, zainstalowałem, poźniej trafiłem na tę stronę:

https://wiki.openwrt.org/doc/howto/wireless.overview

i doinstalowałem kmod-mac80211 i wireless-tools. wifi, restart i dalej nic nie ma.

pozdrawiam,
geos

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

kmod-rt2800-pci i  wpad-mini zainstaluj.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez geos (edytowany przez geos 2017-09-17 12:05:03)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

oba zainstalowane i up to date. dalej nic.

tutaj zalazłem jakby podobny problem: https://eko.one.pl/forum/viewtopic.php? … 70#p160770
czy to możliwe, że jedynym wyjściem jest kompilacja własnego obrazu?

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Zrestartuj i pokaż logread cały.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez geos (edytowany przez geos 2017-09-17 12:40:42)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

tak to wygląda - czyżby brak jakiegoś pliku rom?

Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.000000] Linux version 4.4.71 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 Thu Jun 8 10:18:56 2017
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] SoC: GRX200 rev 1.2
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Zone ranges:
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Early memory node ranges
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804bc4b0, node_mem_map 8100a780
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.000000] Kernel command line: console=ttyLTQ0,115200
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Memory: 123404K/131072K available (3918K kernel code, 165K rwdata, 884K rodata, 1224K init, 213K bss, 7668K reserved, 0K cma-reserved)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] NR_IRQS:256
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] Setting up vectored interrupts
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] CPU Clock: 500MHz
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.007854] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.042316] pid_max: default: 32768 minimum: 301
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.047153] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.053719] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.067087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.076721] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.082930] pinctrl core: initialized pinctrl subsystem
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.089446] NET: Registered protocol family 16
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.098565] pinctrl-xway 1e100b10.pinmux: Init done
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.104092] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.214146] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.219895] Can't analyze schedule() prologue at 80009038
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.234087] PCI host bridge /fpi@10000000/pci@E105400 ranges:
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.239698]  MEM 0x0000000018000000..0x0000000019ffffff
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.244982]   IO 0x000000001ae00000..0x000000001affffff
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.264169] gpio-stp-xway 1e100bb0.stp: Init done
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.269413] usbcore: registered new interface driver usbfs
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.274907] usbcore: registered new interface driver hub
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.280263] usbcore: registered new device driver usb
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.285687] PCI host bridge to bus 0000:00
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.289681] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.296589] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.303532] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.310387] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.318442] pci 0000:00:0e.0: [1814:3062] type 00 class 0x028000
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.318498] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.318895] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.318943] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.326528] clocksource: Switched to clocksource MIPS
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.332838] NET: Registered protocol family 2
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.338088] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.344987] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.351363] TCP: Hash tables configured (established 1024 bind 1024)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.357865] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.363714] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.370274] NET: Registered protocol family 1
Thu Jun  8 21:06:31 2017 kern.debug kernel: [    0.374613] PCI: CLS 0 bytes, default 32
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.381248] gptu: totally 6 16-bit timers/counters
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.386083] gptu: misc_register on minor 63
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.390183] gptu: succeeded to request irq 126
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.394676] gptu: succeeded to request irq 127
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.399187] gptu: succeeded to request irq 128
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.403700] gptu: succeeded to request irq 129
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.408214] gptu: succeeded to request irq 130
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.412728] gptu: succeeded to request irq 131
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.417560] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a2x.bin
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.424826] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7DA0000
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.431163] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7DA0000
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.537823] No VPEs reserved for AP/SP, not initialize VPE loader
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.537823] Pass maxvpes=<n> argument as kernel argument
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.549175] No TCs reserved for AP/SP, not initializing RTLX.
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.549175] Pass maxtcs=<n> argument as kernel argument
Thu Jun  8 21:06:31 2017 kern.warn kernel: [    0.561021] Crashlog allocated RAM at address 0x3f00000
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.586380] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.592106] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.605884] io scheduler noop registered
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.609698] io scheduler deadline registered (default)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.615551] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.624444] console [ttyLTQ0] enabled
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.631772] bootconsole [early0] disabled
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.643131] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.648029] nand: Samsung NAND 128MiB 3,3V 8-bit
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.652643] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.660289] Scanning device for bad blocks
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.750312] 4 ofpart partitions found on MTD device 10000000.nand-parts
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.755494] Creating 4 MTD partitions on "10000000.nand-parts":
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.761412] 0x000000000000-0x000000040000 : "uboot"
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.768123] 0x000000040000-0x000000060000 : "uboot-env"
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.774027] 0x000000060000-0x000000260000 : "kernel"
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    0.779737] 0x000000260000-0x000008000000 : "ubi"
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.888378] libphy: lantiq,xrx200-mdio: probed
Thu Jun  8 21:06:31 2017 kern.info kernel: [    0.963262] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.031236] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:01, irq=-1)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.099220] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.167219] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.235236] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.342508] ltq-cputemp cputemp@0: Current CPU die temperature: 45.0 °C
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.348059] wdt 1f8803f0.watchdog: Init done
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.356094] NET: Registered protocol family 10
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.366336] NET: Registered protocol family 17
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.369480] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.381991] 8021q: 802.1Q VLAN Support v1.8
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.390287] UBI: auto-attach mtd3
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.392038] ubi0: attaching mtd3
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.578208] ubi0: scanning is finished
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.592602] ubi0: attached mtd3 (name "ubi", size 125 MiB)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.596685] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.603527] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.610226] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.617017] ubi0: good PEBs: 1005, bad PEBs: 0, corrupted PEBs: 0
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.623110] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.630336] ubi0: max/mean erase counter: 11/6, WL threshold: 4096, image sequence number: 1312724221
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.639561] ubi0: available PEBs: 0, total reserved PEBs: 1005, PEBs reserved for bad PEB handling: 20
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.648934] ubi0: background thread "ubi_bgt0d" started, PID 318
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.656553] block ubiblock0_0: created from ubi0:0(rootfs)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    1.660648] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.674777] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Jun  8 21:06:31 2017 kern.info kernel: [    1.684225] Freeing unused kernel memory: 1224K (804de000 - 80610000)
Thu Jun  8 21:06:31 2017 user.info kernel: [    2.554469] init: Console is alive
Thu Jun  8 21:06:31 2017 user.info kernel: [    2.556759] init: - watchdog -
Thu Jun  8 21:06:31 2017 kern.info kernel: [    3.081971] eth0: port 1 got link
Thu Jun  8 21:06:31 2017 user.info kernel: [    3.509634] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Jun  8 21:06:31 2017 kern.info kernel: [    3.615016] dwc2 1e101000.ifxhcd: requested GPIO 495
Thu Jun  8 21:06:31 2017 kern.info kernel: [    4.318780] eth0: port 5 got link
Thu Jun  8 21:06:31 2017 kern.info kernel: [    4.474718] dwc2 1e101000.ifxhcd: DWC OTG Controller
Thu Jun  8 21:06:31 2017 kern.info kernel: [    4.478311] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Thu Jun  8 21:06:31 2017 kern.info kernel: [    4.485623] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Thu Jun  8 21:06:31 2017 kern.err kernel: [    4.491151] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Thu Jun  8 21:06:31 2017 kern.err kernel: [    4.498594] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Thu Jun  8 21:06:31 2017 kern.info kernel: [    4.506039] hub 1-0:1.0: USB hub found
Thu Jun  8 21:06:31 2017 kern.info kernel: [    4.509032] hub 1-0:1.0: 1 port detected
Thu Jun  8 21:06:31 2017 kern.info kernel: [    5.370722] dwc2 1e106000.ifxhcd: DWC OTG Controller
Thu Jun  8 21:06:31 2017 kern.info kernel: [    5.374318] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Thu Jun  8 21:06:31 2017 kern.info kernel: [    5.381627] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Thu Jun  8 21:06:31 2017 kern.err kernel: [    5.387158] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Thu Jun  8 21:06:31 2017 kern.err kernel: [    5.394601] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Thu Jun  8 21:06:31 2017 kern.info kernel: [    5.402036] hub 2-0:1.0: USB hub found
Thu Jun  8 21:06:31 2017 kern.info kernel: [    5.405019] hub 2-0:1.0: 1 port detected
Thu Jun  8 21:06:31 2017 user.info kernel: [    5.409792] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Jun  8 21:06:31 2017 user.info kernel: [    5.426164] init: - preinit -
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    6.139250] random: procd: uninitialized urandom read (4 bytes read, 26 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.382409] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 395
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.410644] UBIFS (ubi0:1): recovery needed
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.529111] UBIFS (ubi0:1): recovery completed
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.532236] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.539977] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.549888] UBIFS (ubi0:1): FS size: 121927680 bytes (116 MiB, 945 LEBs), journal size 6064128 bytes (5 MiB, 47 LEBs)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.560513] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [    9.567129] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 8D157DE0-9E28-4106-84C5-4A1715C2C069, small LPT model
Thu Jun  8 21:06:31 2017 user.info kernel: [    9.581720] mount_root: switching to ubifs overlay
Thu Jun  8 21:06:31 2017 user.warn kernel: [    9.592006] urandom-seed: Seeding with /etc/urandom.seed
Thu Jun  8 21:06:31 2017 user.info kernel: [    9.771128] procd: - early -
Thu Jun  8 21:06:31 2017 user.info kernel: [    9.772723] procd: - watchdog -
Thu Jun  8 21:06:31 2017 kern.info kernel: [   10.082561] eth0: port 1 lost link
Thu Jun  8 21:06:31 2017 kern.info kernel: [   10.350557] eth0: port 5 lost link
Thu Jun  8 21:06:31 2017 user.info kernel: [   10.424685] procd: - ubus -
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.502512] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.511365] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.519648] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.528164] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.537603] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.546086] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.555274] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   10.564257] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Jun  8 21:06:31 2017 user.info kernel: [   10.573477] procd: - init -
Thu Jun  8 21:06:31 2017 user.info kernel: [   11.040200] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.048804] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.059853] NET: Registered protocol family 8
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.062820] NET: Registered protocol family 20
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.073670] PPP generic driver version 2.4.2
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.083931] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.107528] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.107528] 
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.107528] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
Thu Jun  8 21:06:31 2017 kern.warn kernel: [   11.131184] 
Thu Jun  8 21:06:31 2017 kern.warn kernel: [   11.131184] Predefined debug level: 3
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.143476] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.150098] Backport generated by backports.git backports-20160324-13-g24da7d3c
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.162013] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.171264] Infineon Technologies DEU driver version 2.0.0 
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.177370] IFX DEU DES initialized (multiblock).
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.181649] IFX DEU AES initialized (multiblock).
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.185781] IFX DEU ARC4 initialized (multiblock).
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.190410] IFX DEU SHA1 initialized.
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.194006] IFX DEU MD5 initialized.
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.197634] IFX DEU SHA1_HMAC initialized.
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   11.201667] IFX DEU MD5_HMAC initialized.
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.212668] nf_conntrack version 0.5.0 (1947 buckets, 7788 max)
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.237495] NET: Registered protocol family 24
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.260319] xt_time: kernel timezone is -0000
Thu Jun  8 21:06:31 2017 kern.warn kernel: [   11.347110] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
Thu Jun  8 21:06:31 2017 kern.info kernel: [   11.351575] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
Thu Jun  8 21:06:31 2017 kern.warn kernel: [   11.361348] rt2800pci 0000:00:0e.0: Direct firmware load for RT3062.eeprom failed with error -2
Thu Jun  8 21:06:31 2017 kern.warn kernel: [   11.369826] rt2800pci 0000:00:0e.0: Falling back to user helper
Thu Jun  8 21:06:31 2017 kern.err kernel: [   11.650234] firmware RT3062.eeprom: firmware_loading_store: map pages failed
Thu Jun  8 21:06:31 2017 kern.err kernel: [   11.656110] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
Thu Jun  8 21:06:31 2017 kern.warn kernel: [   11.664417] rt2800pci: probe of 0000:00:0e.0 failed with error -11
Thu Jun  8 21:06:31 2017 user.info kernel: [   11.686806] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Jun  8 21:06:31 2017 kern.notice kernel: [   13.471771] random: jshn: uninitialized urandom read (4 bytes read, 55 bits of entropy available)
Thu Jun  8 21:06:33 2017 user.notice : Added device handler type: 8021ad
Thu Jun  8 21:06:33 2017 user.notice : Added device handler type: 8021q
Thu Jun  8 21:06:33 2017 user.notice : Added device handler type: macvlan
Thu Jun  8 21:06:33 2017 user.notice : Added device handler type: bridge
Thu Jun  8 21:06:33 2017 user.notice : Added device handler type: Network device
Thu Jun  8 21:06:33 2017 user.notice : Added device handler type: tunnel
Thu Jun  8 21:06:34 2017 user.notice : failed to find /lib/firmware/adsl.bin
Thu Jun  8 21:06:36 2017 authpriv.info dropbear[770]: Not backgrounding
Thu Jun  8 21:06:37 2017 user.notice : setting up led wifi
Thu Jun  8 21:06:37 2017 user.notice : setting up led usb
Thu Jun  8 21:06:38 2017 user.notice : setting up led usb2
Thu Jun  8 21:06:38 2017 user.notice : setting up led dsl
Thu Jun  8 21:06:38 2017 user.notice : setting up led internet
Thu Jun  8 21:06:39 2017 kern.info kernel: [   21.912636] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Jun  8 21:06:39 2017 kern.info kernel: [   21.931008] device eth0 entered promiscuous mode
Thu Jun  8 21:06:39 2017 kern.info kernel: [   21.940323] device eth0.1 entered promiscuous mode
Thu Jun  8 21:06:39 2017 kern.info kernel: [   21.952036] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.077362] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'wan' is enabled
Thu Jun  8 21:06:39 2017 daemon.info odhcpd[704]: Raising SIGUSR1 due to address change on br-lan
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.398785] eth0: port 1 got link
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.401614] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Jun  8 21:06:39 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'wan' has link connectivity 
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.446675] br-lan: port 1(eth0.1) entered forwarding state
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.450923] br-lan: port 1(eth0.1) entered forwarding state
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.456711] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Thu Jun  8 21:06:39 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Jun  8 21:06:39 2017 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jun  8 21:06:39 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.534639] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Jun  8 21:06:39 2017 kern.info kernel: [   22.578811] eth0: port 5 got link
Thu Jun  8 21:06:40 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jun  8 21:06:40 2017 daemon.notice netifd: wan (926): udhcpc: started, v1.25.1
Thu Jun  8 21:06:40 2017 daemon.info procd: - init complete -
Thu Jun  8 21:06:40 2017 daemon.info odhcpd[704]: Using a RA lifetime of 0 seconds on br-lan
Thu Jun  8 21:06:40 2017 daemon.notice odhcpd[704]: Failed to send to ff02::1%br-lan (Address not available)
Thu Jun  8 21:06:40 2017 daemon.notice netifd: wan (926): udhcpc: sending discover
Thu Jun  8 21:06:40 2017 daemon.notice netifd: wan (926): udhcpc: sending select for 192.168.13.12
Thu Jun  8 21:06:40 2017 daemon.notice netifd: wan (926): udhcpc: lease of 192.168.13.12 obtained, lease time 600
Thu Jun  8 21:06:41 2017 daemon.notice netifd: Interface 'wan' is now up
Thu Jun  8 21:06:41 2017 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Thu Jun  8 21:06:41 2017 kern.info kernel: [   24.454537] br-lan: port 1(eth0.1) entered forwarding state
Thu Jun  8 21:06:42 2017 daemon.info odhcpd[704]: Using a RA lifetime of 0 seconds on br-lan
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: started, version 2.77 cachesize 150
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: DNS service limited to local subnets
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq-dhcp[1063]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: using local addresses only for domain lan
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: reading /tmp/resolv.conf.auto
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: using local addresses only for domain lan
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: using nameserver 192.168.13.13#53
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: read /etc/hosts - 4 addresses
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: read /tmp/hosts/odhcpd - 0 addresses
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq[1063]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Thu Jun  8 21:06:47 2017 daemon.info dnsmasq-dhcp[1063]: read /etc/ethers - 0 addresses
Thu Jun  8 21:06:48 2017 kern.notice kernel: [   31.822574] random: nonblocking pool is initialized
Sun Sep 17 11:28:50 2017 daemon.info dnsmasq[1063]: read /etc/hosts - 4 addresses
Sun Sep 17 11:28:50 2017 daemon.info dnsmasq[1063]: read /tmp/hosts/odhcpd - 0 addresses
Sun Sep 17 11:28:50 2017 daemon.info dnsmasq[1063]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Sun Sep 17 11:28:50 2017 daemon.info dnsmasq-dhcp[1063]: read /etc/ethers - 0 addresses
Sun Sep 17 11:29:11 2017 authpriv.info dropbear[1092]: Child connection from 192.168.1.102:2503
Sun Sep 17 11:29:22 2017 authpriv.notice dropbear[1092]: Auth succeeded with blank password for 'root' from 192.168.1.102:2503

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Masz plik RT3062.eeprom ? Jeżeli nie to weź go ode mnie: http://dl.eko.one.pl/projekty/dsl/P2812 … tion_data/

i umieść go w /lib/firmware. Zrestartuj.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez geos (edytowany przez geos 2017-09-17 12:45:07)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

zadziałało! dziękuję Cezary! jest szczęście.

10 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

zwracam się ponownie z prośbą o diagnozę. wgrałem najnowsze OpenWrt. posprawdzałem, czy są zainstalowane powyższe pakiety - są. umieściłem plik RT3062.eeprom w /lib/firmware. niestety, nie widzę w Luci wi-fi. zamieszczam cały logread:

Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 SMP Thu Aug 16 07:51:15 2018
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] SoC: GRX200 rev 1.2
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] MIPS: machine is ZyXEL P-2812HNU-F1
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Detected 1 available secondary CPU(s)
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Zone ranges:
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Early memory node ranges
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80542640, node_mem_map 8100a7e0
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] percpu: Embedded 12 pages/cpu @8110d000 s17488 r8192 d23472 u49152
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s17488 r8192 d23472 u49152 alloc=12*4096
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.000000] Kernel command line: console=ttyLTQ0,115200
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00001c11
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00001c11
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Memory: 122856K/131072K available (4305K kernel code, 173K rwdata, 900K rodata, 1260K init, 244K bss, 8216K reserved, 0K cma-reserved)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] NR_IRQS:256
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Setting up vectored interrupts
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] Setting up IPI vectored interrupts
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] CPU Clock: 500MHz
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.007885] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.042381] pid_max: default: 32768 minimum: 301
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.047258] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.053797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.065579] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.065591] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.065779] CPU1 revision is: 00019556 (MIPS 34Kc)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.116509] Synchronize counters for CPU 1:
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.116511] done.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.123010] Brought up 2 CPUs
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.131174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.140835] futex hash table entries: 512 (order: 2, 16384 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.147059] pinctrl core: initialized pinctrl subsystem
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.153513] NET: Registered protocol family 16
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.166685] pinctrl-xway 1e100b10.pinmux: Init done
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.172648] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.285837] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.291623] Can't analyze schedule() prologue at 8043158c
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.318395] PCI host bridge /fpi@10000000/pci@E105400 ranges:
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.324078]  MEM 0x0000000018000000..0x0000000019ffffff
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.329341]   IO 0x000000001ae00000..0x000000001affffff
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.362318] gpio-stp-xway 1e100bb0.stp: Init done
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.368146] usbcore: registered new interface driver usbfs
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.373698] usbcore: registered new interface driver hub
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.379062] usbcore: registered new device driver usb
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.384725] PCI host bridge to bus 0000:00
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.388733] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.395667] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.402596] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.409454] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.417497] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.419730] clocksource: Switched to clocksource MIPS
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.427174] NET: Registered protocol family 2
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.432727] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.439624] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.446033] TCP: Hash tables configured (established 1024 bind 1024)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.452558] UDP hash table entries: 256 (order: 1, 8192 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.458353] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.464983] NET: Registered protocol family 1
Thu Aug 16 08:05:10 2018 kern.debug kernel: [    0.469292] PCI: CLS 0 bytes, default 32
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.470011] gptu: totally 6 16-bit timers/counters
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.474890] gptu: misc_register on minor 63
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.479111] gptu: succeeded to request irq 126
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.483532] gptu: succeeded to request irq 127
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.488056] gptu: succeeded to request irq 128
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.492573] gptu: succeeded to request irq 129
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.497074] gptu: succeeded to request irq 130
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.501599] gptu: succeeded to request irq 131
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.503679] random: fast init done
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.509980] phy-xrx200 gphy-xrx200: requesting lantiq/xrx200_phy11g_a22.bin
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.517533] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7E80000
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.523896] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7E80000
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.631432] No VPEs reserved for AP/SP, not initialize VPE loader
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.631432] Pass maxvpes=<n> argument as kernel argument
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.642809] No TCs reserved for AP/SP, not initializing RTLX.
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.642809] Pass maxtcs=<n> argument as kernel argument
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    0.655539] Crashlog allocated RAM at address 0x3f00000
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.661483] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.684172] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.689932] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.705472] io scheduler noop registered
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.709313] io scheduler deadline registered (default)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.715777] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.724700] console [ttyLTQ0] enabled
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.732034] bootconsole [early0] disabled
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.742536] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.747453] nand: Samsung NAND 128MiB 3,3V 8-bit
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.752062] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.759753] Scanning device for bad blocks
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.853671] 4 fixed-partitions partitions found on MTD device 10000000.nand-parts
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.859740] Creating 4 MTD partitions on "10000000.nand-parts":
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.865680] 0x000000000000-0x000000040000 : "uboot"
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.872549] 0x000000040000-0x000000060000 : "uboot-env"
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.878741] 0x000000060000-0x000000260000 : "kernel"
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    0.884591] 0x000000260000-0x000008000000 : "ubi"
Thu Aug 16 08:05:10 2018 kern.info kernel: [    0.895322] libphy: Fixed MDIO Bus: probed
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.003058] libphy: lantiq,xrx200-mdio: probed
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.080352] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:00, irq=-1)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.164327] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:01, irq=-1)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.248310] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=-1)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.332312] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=-1)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.416329] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:05, irq=-1)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.532777] ltq-cputemp cputemp@0: Current CPU die temperature: 49.0 °C
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.538448] wdt 1f8803f0.watchdog: Init done
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.549909] NET: Registered protocol family 10
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.555127] NET: Registered protocol family 17
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.558306] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.571137] 8021q: 802.1Q VLAN Support v1.8
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.579258] UBI: auto-attach mtd3
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.581218] ubi0: attaching mtd3
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.745316] ubi0: scanning is finished
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.761684] ubi0: attached mtd3 (name "ubi", size 125 MiB)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.765775] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.772647] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.779319] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.786117] ubi0: good PEBs: 1005, bad PEBs: 0, corrupted PEBs: 0
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.792210] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.799448] ubi0: max/mean erase counter: 12/6, WL threshold: 4096, image sequence number: 1312724221
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.808669] ubi0: available PEBs: 0, total reserved PEBs: 1005, PEBs reserved for bad PEB handling: 20
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.818048] ubi0: background thread "ubi_bgt0d" started, PID 375
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.826012] block ubiblock0_0: created from ubi0:0(rootfs)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    1.830127] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.843940] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    1.853624] Freeing unused kernel memory: 1260K
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    1.856786] This architecture does not have kernel memory protection.
Thu Aug 16 08:05:10 2018 user.info kernel: [    2.504797] init: Console is alive
Thu Aug 16 08:05:10 2018 user.info kernel: [    2.507075] init: - watchdog -
Thu Aug 16 08:05:10 2018 user.info kernel: [    3.473587] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.592549] dwc2 1e101000.ifxhcd: requested GPIO 495
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.698167] dwc2 1e101000.ifxhcd: DWC OTG Controller
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.701788] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.709127] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Thu Aug 16 08:05:10 2018 kern.err kernel: [    3.714647] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Thu Aug 16 08:05:10 2018 kern.err kernel: [    3.722045] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.729722] hub 1-0:1.0: USB hub found
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.732227] hub 1-0:1.0: 1 port detected
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.837948] dwc2 1e106000.ifxhcd: DWC OTG Controller
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.841599] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.848889] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Thu Aug 16 08:05:10 2018 kern.err kernel: [    3.854396] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Thu Aug 16 08:05:10 2018 kern.err kernel: [    3.861837] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.869605] hub 2-0:1.0: USB hub found
Thu Aug 16 08:05:10 2018 kern.info kernel: [    3.872104] hub 2-0:1.0: 1 port detected
Thu Aug 16 08:05:10 2018 user.info kernel: [    3.877429] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Aug 16 08:05:10 2018 user.info kernel: [    3.885418] init: - preinit -
Thu Aug 16 08:05:10 2018 kern.info kernel: [    4.592036] lantiq,xrx200-net 1e108000.eth eth0: port 5 got link
Thu Aug 16 08:05:10 2018 kern.info kernel: [    4.691551] lantiq,xrx200-net 1e108000.eth eth0: port 0 got link
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    4.717238] random: procd: uninitialized urandom read (4 bytes read)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    7.952561] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 439
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.000609] UBIFS (ubi0:1): recovery needed
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.137102] UBIFS (ubi0:1): recovery completed
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.140369] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.148039] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.157922] UBIFS (ubi0:1): FS size: 121927680 bytes (116 MiB, 945 LEBs), journal size 6064128 bytes (5 MiB, 47 LEBs)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.168533] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    8.175171] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DE940D2E-3D36-4E13-8243-B4F4A1E837AE, small LPT model
Thu Aug 16 08:05:10 2018 user.info kernel: [    8.189507] mount_root: switching to ubifs overlay
Thu Aug 16 08:05:10 2018 user.warn kernel: [    8.227812] urandom-seed: Seeding with /etc/urandom.seed
Thu Aug 16 08:05:10 2018 user.info kernel: [    8.419032] procd: - early -
Thu Aug 16 08:05:10 2018 user.info kernel: [    8.420796] procd: - watchdog -
Thu Aug 16 08:05:10 2018 kern.info kernel: [    8.783754] lantiq,xrx200-net 1e108000.eth eth0: port 0 lost link
Thu Aug 16 08:05:10 2018 kern.info kernel: [    8.788517] lantiq,xrx200-net 1e108000.eth eth0: port 5 lost link
Thu Aug 16 08:05:10 2018 user.info kernel: [    9.089789] procd: - watchdog -
Thu Aug 16 08:05:10 2018 user.info kernel: [    9.092189] procd: - ubus -
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.174992] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.182268] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.187974] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Aug 16 08:05:10 2018 user.info kernel: [    9.195416] procd: - init -
Thu Aug 16 08:05:10 2018 user.info kernel: [    9.689521] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.698227] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.709653] NET: Registered protocol family 8
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.712664] NET: Registered protocol family 20
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.722973] PPP generic driver version 2.4.2
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.732032] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.754514] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    9.773583]
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    9.773583]
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    9.773583] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    9.781325]
Thu Aug 16 08:05:10 2018 kern.warn kernel: [    9.781325] Predefined debug level: 3
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.792869] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.799503] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.810074] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.818694] Infineon Technologies DEU driver version 2.0.0
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.824566] IFX DEU DES initialized (multiblock).
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.829332] IFX DEU AES initialized (multiblock).
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.833252] IFX DEU ARC4 initialized (multiblock).
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.837782] IFX DEU SHA1 initialized.
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.841386] IFX DEU MD5 initialized.
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.844981] IFX DEU SHA1_HMAC initialized.
Thu Aug 16 08:05:10 2018 kern.notice kernel: [    9.849050] IFX DEU MD5_HMAC initialized.
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.860480] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.911107] NET: Registered protocol family 24
Thu Aug 16 08:05:10 2018 kern.info kernel: [    9.930537] xt_time: kernel timezone is -0000
Thu Aug 16 08:05:10 2018 user.info kernel: [   10.017904] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Aug 16 08:05:10 2018 kern.warn kernel: [   11.883166] urandom_read: 5 callbacks suppressed
Thu Aug 16 08:05:10 2018 kern.notice kernel: [   11.883178] random: jshn: uninitialized urandom read (4 bytes read)
Thu Aug 16 08:05:11 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Aug 16 08:05:11 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: started, version 2.80test3 cachesize 150
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: DNS service limited to local subnets
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain test
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain onion
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain localhost
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain local
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain invalid
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain bind
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: using local addresses only for domain lan
Thu Aug 16 08:05:11 2018 daemon.warn dnsmasq[737]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Thu Aug 16 08:05:11 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: tunnel
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: Network device
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: bridge
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: veth
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: macvlan
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: 8021ad
Thu Aug 16 08:05:13 2018 user.notice : Added device handler type: 8021q
Thu Aug 16 08:05:16 2018 authpriv.info dropbear[903]: Not backgrounding
Thu Aug 16 08:05:17 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Thu Aug 16 08:05:17 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Thu Aug 16 08:05:17 2018 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Thu Aug 16 08:05:17 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Thu Aug 16 08:05:17 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Thu Aug 16 08:05:17 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Thu Aug 16 08:05:18 2018 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Thu Aug 16 08:05:18 2018 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Aug 16 08:05:18 2018 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Aug 16 08:05:18 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Thu Aug 16 08:05:18 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.360189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.373620] device eth0 entered promiscuous mode
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.379344] br-lan: port 1(eth0.1) entered blocking state
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.383415] br-lan: port 1(eth0.1) entered disabled state
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.389582] device eth0.1 entered promiscuous mode
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.398952] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'lan' is enabled
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'lan' is setting up now
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'lan' is now up
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Aug 16 08:05:18 2018 kern.info kernel: [   21.454583] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Thu Aug 16 08:05:18 2018 daemon.notice netifd: Interface 'wan' is enabled
Thu Aug 16 08:05:19 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Aug 16 08:05:19 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Aug 16 08:05:19 2018 kern.notice kernel: [   21.559828] random: crng init done
Thu Aug 16 08:05:19 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Aug 16 08:05:20 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Thu Aug 16 08:05:20 2018 daemon.notice procd: /etc/rc.d/S96led: Skipping trigger 'phy0radio' for led 'wifi' due to missing kernel module
Thu Aug 16 08:05:20 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led usb
Thu Aug 16 08:05:20 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led usb2
Thu Aug 16 08:05:20 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led dsl
Thu Aug 16 08:05:20 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led internet
Thu Aug 16 08:05:21 2018 daemon.notice procd: /etc/rc.d/S97dsl_control: failed to find /lib/firmware/adsl.bin
Thu Aug 16 08:05:21 2018 kern.info kernel: [   24.431975] lantiq,xrx200-net 1e108000.eth eth0: port 5 got link
Thu Aug 16 08:05:21 2018 kern.info kernel: [   24.437080] lantiq,xrx200-net 1e108000.eth eth0: port 0 got link
Thu Aug 16 08:05:21 2018 kern.info kernel: [   24.443126] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Aug 16 08:05:21 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Aug 16 08:05:21 2018 kern.info kernel: [   24.452262] br-lan: port 1(eth0.1) entered blocking state
Thu Aug 16 08:05:21 2018 kern.info kernel: [   24.456292] br-lan: port 1(eth0.1) entered forwarding state
Thu Aug 16 08:05:21 2018 kern.info kernel: [   24.462372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Thu Aug 16 08:05:22 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Aug 16 08:05:22 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Aug 16 08:05:22 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Aug 16 08:05:22 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Aug 16 08:05:22 2018 daemon.notice netifd: bridge 'br-lan' link is up
Thu Aug 16 08:05:22 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Aug 16 08:05:22 2018 kern.info kernel: [   24.499827] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Aug 16 08:05:22 2018 daemon.notice netifd: wan (1358): udhcpc: started, v1.28.3
Thu Aug 16 08:05:22 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Thu Aug 16 08:05:22 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 08:05:22 2018 daemon.notice netifd: wan (1358): udhcpc: sending discover
Thu Aug 16 08:05:22 2018 daemon.notice netifd: wan (1358): udhcpc: sending select for 192.168.13.12
Thu Aug 16 08:05:22 2018 daemon.notice netifd: wan (1358): udhcpc: lease of 192.168.13.12 obtained, lease time 120
Thu Aug 16 08:05:22 2018 daemon.warn odhcpd[826]: DHCPV6 SOLICIT IA_NA from 000100011f8bd552089e01f2a4b4 on br-lan: ok fd72:f641:2c56::c0d/128
Thu Aug 16 08:05:23 2018 daemon.info procd: - init complete -
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: read /tmp/hosts/odhcpd - 0 addresses
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 08:05:23 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Aug 16 08:05:23 2018 daemon.notice netifd: Network alias 'eth0.2' link is up
Thu Aug 16 08:05:23 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Aug 16 08:05:23 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Aug 16 08:05:23 2018 daemon.notice netifd: Interface 'wan' is now up
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: reading /tmp/resolv.conf.auto
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain test
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain onion
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain localhost
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain local
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain invalid
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain bind
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using local addresses only for domain lan
Thu Aug 16 08:05:23 2018 daemon.info dnsmasq[737]: using nameserver 192.168.13.13#53
Thu Aug 16 08:05:23 2018 daemon.err odhcp6c[1464]: Failed to send RS (Address not available)
Thu Aug 16 08:05:23 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Thu Aug 16 08:05:24 2018 daemon.warn odhcpd[826]: DHCPV6 SOLICIT IA_NA from 000100011f8bd552089e01f2a4b4 on br-lan: ok fd72:f641:2c56::c0d/128
Thu Aug 16 08:05:25 2018 daemon.warn odhcpd[826]: DHCPV6 REQUEST IA_NA from 000100011f8bd552089e01f2a4b4 on br-lan: ok fd72:f641:2c56::c0d/128
Thu Aug 16 08:05:25 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Thu Aug 16 08:05:25 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c.1377 - 0 addresses
Thu Aug 16 08:05:25 2018 daemon.info dnsmasq[737]: read /tmp/hosts/odhcpd - 1 addresses
Thu Aug 16 08:05:25 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[737]: exiting on receipt of SIGTERM
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: started, version 2.80test3 cachesize 150
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: DNS service limited to local subnets
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq-dhcp[1544]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain test
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain onion
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain localhost
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain local
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain invalid
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain bind
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain lan
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: reading /tmp/resolv.conf.auto
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain test
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain onion
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain localhost
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain local
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain invalid
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain bind
Fri Oct 12 12:45:05 2018 daemon.info dnsmasq[1544]: using local addresses only for domain lan

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Masz w ogóle zainstalowane kmod-rt2800-pci, kmod-mac80211 + zależości, wpad-mini?

W logach nie masz grama informacji o inicjalizacji pci.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

wygląda, że są zainstalowane:\

root@OpenWrt:~# opkg install kmod-rt2800-pci kmod-mac80211 wpad-mini
Package kmod-rt2800-pci (4.9.120+2017-11-01-9) installed in root is up to date.
Package kmod-mac80211 (4.9.120+2017-11-01-9) installed in root is up to date.
Package wpad-mini (2018-04-09-fa617ee6-5) installed in root is up to date.

dobrze rozumiem, że zależności powinny się dociągnąć w razie potrzeby podczas instalacji tych pakietów?

13 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Tak, jak trzeba to się dociągają.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

14 Odpowiedź przez geos (edytowany przez geos 2018-10-12 21:11:10)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

walka trwa. przywróciłem lede 17.01.6 - też nie było wifi (zanim wgrałem openwrt to używałem tego rutera bez problemów, było na nim chyba 17.01.2).

coś mnie tknęło i sprawdziłem /etc/config - nie było pliku wireless. przegrałem go ze starego backupu, restart i.. wireless się pojawiło w Luci. no to ponownie wrzuciłem na pokład openwrt 18.06.1. sytuacja się powtórzyła: nie było pliku wireless a po wgraniu z backupu pojawiło się wireless w Luci.

problem teraz mam taki, że nie mogę skonfigurować tego wifi. pokazuje mi komunikat "Wireless is not associated". logread wygląda teraz tak (i chyba za bardzo się nie zmenił). ki czort?

Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 SMP Thu Aug 16 07:51:15 2018
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] SoC: GRX200 rev 1.2
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] MIPS: machine is ZyXEL P-2812HNU-F1
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Detected 1 available secondary CPU(s)
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Zone ranges:
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Early memory node ranges
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80542640, node_mem_map 8100a7e0
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] percpu: Embedded 12 pages/cpu @8110d000 s17488 r8192 d23472 u49152
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s17488 r8192 d23472 u49152 alloc=12*4096
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.000000] Kernel command line: console=ttyLTQ0,115200
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00001c11
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00001c11
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Memory: 122856K/131072K available (4305K kernel code, 173K rwdata, 900K rodata, 1260K init, 244K bss, 8216K reserved, 0K cma-reserved)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] NR_IRQS:256
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Setting up vectored interrupts
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] Setting up IPI vectored interrupts
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] CPU Clock: 500MHz
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.007885] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.042381] pid_max: default: 32768 minimum: 301
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.047258] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.053797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.065581] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.065594] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.065782] CPU1 revision is: 00019556 (MIPS 34Kc)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.116509] Synchronize counters for CPU 1:
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.116512] done.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.123009] Brought up 2 CPUs
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.131174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.140835] futex hash table entries: 512 (order: 2, 16384 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.147059] pinctrl core: initialized pinctrl subsystem
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.153514] NET: Registered protocol family 16
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.166688] pinctrl-xway 1e100b10.pinmux: Init done
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.172663] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.285869] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.291660] Can't analyze schedule() prologue at 8043158c
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.318435] PCI host bridge /fpi@10000000/pci@E105400 ranges:
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.324122]  MEM 0x0000000018000000..0x0000000019ffffff
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.329380]   IO 0x000000001ae00000..0x000000001affffff
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.362585] gpio-stp-xway 1e100bb0.stp: Init done
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.368403] usbcore: registered new interface driver usbfs
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.373962] usbcore: registered new interface driver hub
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.379347] usbcore: registered new device driver usb
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.384987] PCI host bridge to bus 0000:00
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.388993] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.395926] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.402859] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.409714] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.417759] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.420242] clocksource: Switched to clocksource MIPS
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.426700] NET: Registered protocol family 2
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.432385] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.439275] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.445677] TCP: Hash tables configured (established 1024 bind 1024)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.452247] UDP hash table entries: 256 (order: 1, 8192 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.458023] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.464642] NET: Registered protocol family 1
Fri Oct 12 20:02:17 2018 kern.debug kernel: [    0.468966] PCI: CLS 0 bytes, default 32
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.469392] random: fast init done
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.473145] gptu: totally 6 16-bit timers/counters
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.478084] gptu: misc_register on minor 63
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.482244] gptu: succeeded to request irq 126
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.486713] gptu: succeeded to request irq 127
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.491245] gptu: succeeded to request irq 128
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.495739] gptu: succeeded to request irq 129
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.500262] gptu: succeeded to request irq 130
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.504785] gptu: succeeded to request irq 131
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.509659] phy-xrx200 gphy-xrx200: requesting lantiq/xrx200_phy11g_a22.bin
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.517186] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7E40000
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.523544] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7E40000
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.631367] No VPEs reserved for AP/SP, not initialize VPE loader
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.631367] Pass maxvpes=<n> argument as kernel argument
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.642747] No TCs reserved for AP/SP, not initializing RTLX.
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.642747] Pass maxtcs=<n> argument as kernel argument
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    0.655433] Crashlog allocated RAM at address 0x3f00000
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.661134] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.683948] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.689694] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.705015] io scheduler noop registered
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.708846] io scheduler deadline registered (default)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.715194] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.724154] console [ttyLTQ0] enabled
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.731435] bootconsole [early0] disabled
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.741998] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.746916] nand: Samsung NAND 128MiB 3,3V 8-bit
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.751534] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.759186] Scanning device for bad blocks
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.852924] 4 fixed-partitions partitions found on MTD device 10000000.nand-parts
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.858998] Creating 4 MTD partitions on "10000000.nand-parts":
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.864922] 0x000000000000-0x000000040000 : "uboot"
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.871810] 0x000000040000-0x000000060000 : "uboot-env"
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.878061] 0x000000060000-0x000000260000 : "kernel"
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    0.883819] 0x000000260000-0x000008000000 : "ubi"
Fri Oct 12 20:02:17 2018 kern.info kernel: [    0.894552] libphy: Fixed MDIO Bus: probed
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.001894] libphy: lantiq,xrx200-mdio: probed
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.080734] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:00, irq=-1)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.164710] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:01, irq=-1)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.248694] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=-1)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.332697] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=-1)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.416709] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:05, irq=-1)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.532731] ltq-cputemp cputemp@0: Current CPU die temperature: 50.0 °C
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.538390] wdt 1f8803f0.watchdog: Init done
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.549841] NET: Registered protocol family 10
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.555095] NET: Registered protocol family 17
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.558274] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.571108] 8021q: 802.1Q VLAN Support v1.8
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.579308] UBI: auto-attach mtd3
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.581270] ubi0: attaching mtd3
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.745475] ubi0: scanning is finished
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.761774] ubi0: attached mtd3 (name "ubi", size 125 MiB)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.765894] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.772740] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.779455] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.786214] ubi0: good PEBs: 1005, bad PEBs: 0, corrupted PEBs: 0
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.792320] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.799563] ubi0: max/mean erase counter: 12/7, WL threshold: 4096, image sequence number: 1312724221
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.808770] ubi0: available PEBs: 0, total reserved PEBs: 1005, PEBs reserved for bad PEB handling: 20
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.818157] ubi0: background thread "ubi_bgt0d" started, PID 375
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.826180] block ubiblock0_0: created from ubi0:0(rootfs)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    1.830284] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.843678] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    1.853343] Freeing unused kernel memory: 1260K
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    1.856485] This architecture does not have kernel memory protection.
Fri Oct 12 20:02:17 2018 user.info kernel: [    2.504431] init: Console is alive
Fri Oct 12 20:02:17 2018 user.info kernel: [    2.506741] init: - watchdog -
Fri Oct 12 20:02:17 2018 user.info kernel: [    3.473334] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.592556] dwc2 1e101000.ifxhcd: requested GPIO 495
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.698570] dwc2 1e101000.ifxhcd: DWC OTG Controller
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.702239] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.709514] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Fri Oct 12 20:02:17 2018 kern.err kernel: [    3.715035] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Fri Oct 12 20:02:17 2018 kern.err kernel: [    3.722471] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.730111] hub 1-0:1.0: USB hub found
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.732621] hub 1-0:1.0: 1 port detected
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.838322] dwc2 1e106000.ifxhcd: DWC OTG Controller
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.841973] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.849263] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Fri Oct 12 20:02:17 2018 kern.err kernel: [    3.854786] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Fri Oct 12 20:02:17 2018 kern.err kernel: [    3.862214] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.869972] hub 2-0:1.0: USB hub found
Fri Oct 12 20:02:17 2018 kern.info kernel: [    3.872463] hub 2-0:1.0: 1 port detected
Fri Oct 12 20:02:17 2018 user.info kernel: [    3.877720] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Oct 12 20:02:17 2018 user.info kernel: [    3.894147] init: - preinit -
Fri Oct 12 20:02:17 2018 kern.info kernel: [    4.588338] lantiq,xrx200-net 1e108000.eth eth0: port 5 got link
Fri Oct 12 20:02:17 2018 kern.info kernel: [    4.697931] lantiq,xrx200-net 1e108000.eth eth0: port 1 got link
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    4.723238] random: procd: uninitialized urandom read (4 bytes read)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    7.983775] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 439
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.014148] UBIFS (ubi0:1): recovery needed
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.117422] UBIFS (ubi0:1): recovery completed
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.120671] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.128310] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.138215] UBIFS (ubi0:1): FS size: 121927680 bytes (116 MiB, 945 LEBs), journal size 6064128 bytes (5 MiB, 47 LEBs)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.148860] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    8.155485] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 1AC3A4EF-6585-4ABE-A896-73BBEFE06787, small LPT model
Fri Oct 12 20:02:17 2018 user.info kernel: [    8.169353] mount_root: switching to ubifs overlay
Fri Oct 12 20:02:17 2018 user.warn kernel: [    8.207146] urandom-seed: Seeding with /etc/urandom.seed
Fri Oct 12 20:02:17 2018 user.info kernel: [    8.399127] procd: - early -
Fri Oct 12 20:02:17 2018 user.info kernel: [    8.400874] procd: - watchdog -
Fri Oct 12 20:02:17 2018 kern.info kernel: [    8.780149] lantiq,xrx200-net 1e108000.eth eth0: port 1 lost link
Fri Oct 12 20:02:17 2018 kern.info kernel: [    8.784913] lantiq,xrx200-net 1e108000.eth eth0: port 5 lost link
Fri Oct 12 20:02:17 2018 user.info kernel: [    9.070376] procd: - watchdog -
Fri Oct 12 20:02:17 2018 user.info kernel: [    9.072666] procd: - ubus -
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.155414] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.162278] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.167851] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Oct 12 20:02:17 2018 user.info kernel: [    9.175417] procd: - init -
Fri Oct 12 20:02:17 2018 user.info kernel: [    9.669140] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.677895] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.689246] NET: Registered protocol family 8
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.692237] NET: Registered protocol family 20
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.702417] PPP generic driver version 2.4.2
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.711501] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.733963] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    9.752841]
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    9.752841]
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    9.752841] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    9.760543]
Fri Oct 12 20:02:17 2018 kern.warn kernel: [    9.760543] Predefined debug level: 3
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.771947] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.778629] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.789024] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.797795] Infineon Technologies DEU driver version 2.0.0
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.803766] IFX DEU DES initialized (multiblock).
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.808666] IFX DEU AES initialized (multiblock).
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.812573] IFX DEU ARC4 initialized (multiblock).
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.817074] IFX DEU SHA1 initialized.
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.820701] IFX DEU MD5 initialized.
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.824329] IFX DEU SHA1_HMAC initialized.
Fri Oct 12 20:02:17 2018 kern.notice kernel: [    9.828391] IFX DEU MD5_HMAC initialized.
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.839798] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.890620] NET: Registered protocol family 24
Fri Oct 12 20:02:17 2018 kern.info kernel: [    9.910094] xt_time: kernel timezone is -0000
Fri Oct 12 20:02:17 2018 user.info kernel: [    9.994529] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Oct 12 20:02:17 2018 kern.warn kernel: [   10.862380] urandom_read: 5 callbacks suppressed
Fri Oct 12 20:02:17 2018 kern.notice kernel: [   10.862392] random: jshn: uninitialized urandom read (4 bytes read)
Fri Oct 12 20:02:18 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Oct 12 20:02:18 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: started, version 2.80test3 cachesize 150
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: DNS service limited to local subnets
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain test
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain onion
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain localhost
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain local
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain invalid
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain bind
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: using local addresses only for domain lan
Fri Oct 12 20:02:18 2018 daemon.warn dnsmasq[737]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Fri Oct 12 20:02:18 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: tunnel
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: Network device
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: bridge
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: veth
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: macvlan
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: 8021ad
Fri Oct 12 20:02:20 2018 user.notice : Added device handler type: 8021q
Fri Oct 12 20:02:23 2018 authpriv.info dropbear[905]: Not backgrounding
Fri Oct 12 20:02:24 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Fri Oct 12 20:02:24 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Fri Oct 12 20:02:24 2018 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Fri Oct 12 20:02:24 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Fri Oct 12 20:02:24 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Fri Oct 12 20:02:24 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Fri Oct 12 20:02:25 2018 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Fri Oct 12 20:02:25 2018 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Fri Oct 12 20:02:25 2018 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Fri Oct 12 20:02:25 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Fri Oct 12 20:02:25 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Fri Oct 12 20:02:25 2018 kern.info kernel: [   20.402203] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Oct 12 20:02:26 2018 kern.info kernel: [   20.414888] device eth0 entered promiscuous mode
Fri Oct 12 20:02:26 2018 kern.info kernel: [   20.420953] br-lan: port 1(eth0.1) entered blocking state
Fri Oct 12 20:02:26 2018 kern.info kernel: [   20.425018] br-lan: port 1(eth0.1) entered disabled state
Fri Oct 12 20:02:26 2018 kern.info kernel: [   20.431170] device eth0.1 entered promiscuous mode
Fri Oct 12 20:02:26 2018 kern.info kernel: [   20.439012] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'lan' is enabled
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'lan' is setting up now
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'lan' is now up
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'loopback' is enabled
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'loopback' is now up
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'wan' is enabled
Fri Oct 12 20:02:26 2018 kern.info kernel: [   20.486930] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Network device 'lo' link is up
Fri Oct 12 20:02:26 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Oct 12 20:02:26 2018 daemon.notice netifd: radio0 (1035): Could not find PHY for device 'radio0'
Fri Oct 12 20:02:26 2018 kern.notice kernel: [   21.108280] random: crng init done
Fri Oct 12 20:02:26 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Oct 12 20:02:27 2018 daemon.notice netifd: radio0 (1102): WARNING: Variable 'data' does not exist or is not an array/object
Fri Oct 12 20:02:27 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Fri Oct 12 20:02:28 2018 daemon.notice procd: /etc/rc.d/S96led: Skipping trigger 'phy0radio' for led 'wifi' due to missing kernel module
Fri Oct 12 20:02:28 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led usb
Fri Oct 12 20:02:28 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led usb2
Fri Oct 12 20:02:28 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led dsl
Fri Oct 12 20:02:28 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led internet
Fri Oct 12 20:02:28 2018 daemon.notice procd: /etc/rc.d/S97dsl_control: failed to find /lib/firmware/adsl.bin
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.468354] lantiq,xrx200-net 1e108000.eth eth0: port 5 got link
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.473417] lantiq,xrx200-net 1e108000.eth eth0: port 1 got link
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.488337] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Oct 12 20:02:29 2018 daemon.notice netifd: Network device 'eth0' link is up
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.502647] br-lan: port 1(eth0.1) entered blocking state
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.506689] br-lan: port 1(eth0.1) entered forwarding state
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.512843] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Fri Oct 12 20:02:29 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Fri Oct 12 20:02:29 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Fri Oct 12 20:02:29 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Fri Oct 12 20:02:29 2018 daemon.notice netifd: Interface 'wan' is setting up now
Fri Oct 12 20:02:29 2018 daemon.notice netifd: bridge 'br-lan' link is up
Fri Oct 12 20:02:29 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Oct 12 20:02:29 2018 kern.info kernel: [   23.532218] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Oct 12 20:02:29 2018 daemon.notice netifd: wan (1376): udhcpc: started, v1.28.3
Fri Oct 12 20:02:29 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Fri Oct 12 20:02:29 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Oct 12 20:02:29 2018 daemon.warn odhcpd[830]: DHCPV6 SOLICIT IA_NA from 000100011f8bd552089e01f2a4b4 on br-lan: ok fdfd:88eb:c4ba::c0d/128
Fri Oct 12 20:02:30 2018 daemon.notice netifd: wan (1376): udhcpc: sending discover
Fri Oct 12 20:02:30 2018 daemon.notice netifd: wan (1376): udhcpc: sending select for 192.168.13.12
Fri Oct 12 20:02:30 2018 daemon.notice netifd: wan (1376): udhcpc: lease of 192.168.13.12 obtained, lease time 120
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: read /tmp/hosts/odhcpd - 0 addresses
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Oct 12 20:02:30 2018 daemon.notice netifd: Interface 'wan' is now up
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: reading /tmp/resolv.conf.auto
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain test
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain onion
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain localhost
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain local
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain invalid
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain bind
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using local addresses only for domain lan
Fri Oct 12 20:02:30 2018 daemon.info dnsmasq[737]: using nameserver 192.168.13.13#53
Fri Oct 12 20:02:30 2018 daemon.info procd: - init complete -
Fri Oct 12 20:02:31 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Fri Oct 12 20:02:31 2018 daemon.warn odhcpd[830]: DHCPV6 SOLICIT IA_NA from 000100011f8bd552089e01f2a4b4 on br-lan: ok fdfd:88eb:c4ba::c0d/128
Fri Oct 12 20:02:32 2018 daemon.warn odhcpd[830]: DHCPV6 REQUEST IA_NA from 000100011f8bd552089e01f2a4b4 on br-lan: ok fdfd:88eb:c4ba::c0d/128
Fri Oct 12 20:02:32 2018 daemon.info dnsmasq[737]: read /etc/hosts - 4 addresses
Fri Oct 12 20:02:32 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c.1381 - 0 addresses
Fri Oct 12 20:02:32 2018 daemon.info dnsmasq[737]: read /tmp/hosts/odhcpd - 1 addresses
Fri Oct 12 20:02:32 2018 daemon.info dnsmasq[737]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[737]: exiting on receipt of SIGTERM
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: started, version 2.80test3 cachesize 150
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: DNS service limited to local subnets
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq-dhcp[1550]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain test
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain onion
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain localhost
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain local
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain invalid
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain bind
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain lan
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: reading /tmp/resolv.conf.auto
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain test
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain onion
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain localhost
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain local
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain invalid
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain bind
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using local addresses only for domain lan
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: using nameserver 192.168.13.13#53
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: read /etc/hosts - 4 addresses
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: read /tmp/hosts/odhcpd - 1 addresses
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq[1550]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Fri Oct 12 20:06:33 2018 daemon.info dnsmasq-dhcp[1550]: read /etc/ethers - 0 addresses
Fri Oct 12 20:06:36 2018 daemon.info dnsmasq-dhcp[1550]: DHCPREQUEST(br-lan) 192.168.1.157 08:9e:01:f2:a4:b4
Fri Oct 12 20:06:36 2018 daemon.info dnsmasq-dhcp[1550]: DHCPACK(br-lan) 192.168.1.157 08:9e:01:f2:a4:b4 hauru
Fri Oct 12 20:06:41 2018 authpriv.info dropbear[1612]: Child connection from 192.168.1.157:60694
Fri Oct 12 20:06:45 2018 authpriv.notice dropbear[1612]: Auth succeeded with blank password for 'root' from 192.168.1.157:60694

15 Odpowiedź przez ad2014

  • ad2014
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-04
  • Posty: 1,144

Odp: brak interfejsu wireless

pokaż jeszcze dmesg

16 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Wireless powinno pojawić się samo jak wykryje interfejsy. Jak przegrałeś plik to luci to widzi (bo jest plik) a nie znaczy że cudownie od razu zacznie działać wifi - bo ci nie wykryło go przecież...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

17 Odpowiedź przez geos (edytowany przez geos 2018-11-03 16:03:49)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

przepraszam za zwłokę, dopiero teraz mogę powrócić do tematu. zresetowałem go do ustawień fabrycznych. wygląda na to, że kmod-rt2800pci oraz wpad-mini są zainstalowane. 

root@OpenWrt:~# opkg list-installed | grep -i kmod-rt2800
kmod-rt2800-lib - 4.9.120+2017-11-01-9
kmod-rt2800-mmio - 4.9.120+2017-11-01-9
kmod-rt2800-pci - 4.9.120+2017-11-01-9
root@OpenWrt:~# opkg list-installed | grep -i wpad
wpad-mini - 2018-04-09-fa617ee6-5

OpenWrt 18 wgrywałem z poziomu LuCi na LEDE 17.

teraz dmesg wygląda tak, poproszę o wskazówki co mógłbym dalej przetestować/doinstalować:

root@OpenWrt:~# dmesg
[    0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9) ) #0 SMP Thu Aug 16 07:51:15 2018
[    0.000000] SoC: GRX200 rev 1.2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[    0.000000] MIPS: machine is ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Detected 1 available secondary CPU(s)
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 80542640, node_mem_map 8100a7e0
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] percpu: Embedded 12 pages/cpu @8110d000 s17488 r8192 d23472 u49152
[    0.000000] pcpu-alloc: s17488 r8192 d23472 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00001c14
[    0.000000] Readback ErrCtl register=00001c14
[    0.000000] Memory: 122856K/131072K available (4305K kernel code, 173K rwdata, 900K rodata, 1260K init, 244K bss, 8216K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] Setting up vectored interrupts
[    0.000000] Setting up IPI vectored interrupts
[    0.000000] CPU Clock: 500MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[    0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[    0.007885] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.042381] pid_max: default: 32768 minimum: 301
[    0.047259] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.053797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.065580] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.065592] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.065780] CPU1 revision is: 00019556 (MIPS 34Kc)
[    0.116509] Synchronize counters for CPU 1: 
[    0.116511] done.
[    0.123010] Brought up 2 CPUs
[    0.131174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.140835] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.147059] pinctrl core: initialized pinctrl subsystem
[    0.153514] NET: Registered protocol family 16
[    0.166671] pinctrl-xway 1e100b10.pinmux: Init done
[    0.172642] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.285828] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.291614] Can't analyze schedule() prologue at 8043158c
[    0.318385] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.324070]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.329332]   IO 0x000000001ae00000..0x000000001affffff
[    0.362540] gpio-stp-xway 1e100bb0.stp: Init done
[    0.368353] usbcore: registered new interface driver usbfs
[    0.373909] usbcore: registered new interface driver hub
[    0.379302] usbcore: registered new device driver usb
[    0.384951] PCI host bridge to bus 0000:00
[    0.388947] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.395880] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.402841] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.409691] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.417734] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.419980] clocksource: Switched to clocksource MIPS
[    0.427395] NET: Registered protocol family 2
[    0.432962] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.439850] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.446263] TCP: Hash tables configured (established 1024 bind 1024)
[    0.452788] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.458614] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.465223] NET: Registered protocol family 1
[    0.469515] PCI: CLS 0 bytes, default 32
[    0.470242] gptu: totally 6 16-bit timers/counters
[    0.475114] gptu: misc_register on minor 63
[    0.479338] gptu: succeeded to request irq 126
[    0.483757] gptu: succeeded to request irq 127
[    0.488270] gptu: succeeded to request irq 128
[    0.492798] gptu: succeeded to request irq 129
[    0.497317] gptu: succeeded to request irq 130
[    0.499931] random: fast init done
[    0.505272] gptu: succeeded to request irq 131
[    0.510204] phy-xrx200 gphy-xrx200: requesting lantiq/xrx200_phy11g_a22.bin
[    0.517754] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7E60000
[    0.524121] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7E60000
[    0.631656] No VPEs reserved for AP/SP, not initialize VPE loader
[    0.631656] Pass maxvpes=<n> argument as kernel argument
[    0.643034] No TCs reserved for AP/SP, not initializing RTLX.
[    0.643034] Pass maxtcs=<n> argument as kernel argument
[    0.655771] Crashlog allocated RAM at address 0x3f00000
[    0.661718] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.684488] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.690245] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.705740] io scheduler noop registered
[    0.709581] io scheduler deadline registered (default)
[    0.716026] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.724942] console [ttyLTQ0] enabled
[    0.732277] bootconsole [early0] disabled
[    0.742749] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.747663] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.752270] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.759957] Scanning device for bad blocks
[    0.853876] 4 fixed-partitions partitions found on MTD device 10000000.nand-parts
[    0.859966] Creating 4 MTD partitions on "10000000.nand-parts":
[    0.865889] 0x000000000000-0x000000040000 : "uboot"
[    0.872793] 0x000000040000-0x000000060000 : "uboot-env"
[    0.878961] 0x000000060000-0x000000260000 : "kernel"
[    0.884863] 0x000000260000-0x000008000000 : "ubi"
[    0.895530] libphy: Fixed MDIO Bus: probed
[    1.003141] libphy: lantiq,xrx200-mdio: probed
[    1.080600] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:00, irq=-1)
[    1.164579] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:01: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:01, irq=-1)
[    1.248561] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=-1)
[    1.332562] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=-1)
[    1.416579] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:05, irq=-1)
[    1.533025] ltq-cputemp cputemp@0: Current CPU die temperature: 47.5 °C
[    1.538678] wdt 1f8803f0.watchdog: Init done
[    1.550142] NET: Registered protocol family 10
[    1.555384] NET: Registered protocol family 17
[    1.558556] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.571397] 8021q: 802.1Q VLAN Support v1.8
[    1.579505] UBI: auto-attach mtd3
[    1.581464] ubi0: attaching mtd3
[    1.745561] ubi0: scanning is finished
[    1.761865] ubi0: attached mtd3 (name "ubi", size 125 MiB)
[    1.765972] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.772836] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.779510] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[    1.786308] ubi0: good PEBs: 1005, bad PEBs: 0, corrupted PEBs: 0
[    1.792401] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.799639] ubi0: max/mean erase counter: 12/7, WL threshold: 4096, image sequence number: 1312724221
[    1.808860] ubi0: available PEBs: 0, total reserved PEBs: 1005, PEBs reserved for bad PEB handling: 20
[    1.818240] ubi0: background thread "ubi_bgt0d" started, PID 375
[    1.826211] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.830325] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.844147] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    1.853834] Freeing unused kernel memory: 1260K
[    1.856995] This architecture does not have kernel memory protection.
[    2.504843] init: Console is alive
[    2.507120] init: - watchdog -
[    3.473569] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.592506] dwc2 1e101000.ifxhcd: requested GPIO 495
[    3.697948] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    3.701574] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    3.708891] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    3.714404] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    3.721826] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    3.729861] hub 1-0:1.0: USB hub found
[    3.732562] hub 1-0:1.0: 1 port detected
[    3.837722] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    3.841385] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    3.848647] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    3.854168] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    3.861604] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    3.869531] hub 2-0:1.0: USB hub found
[    3.872223] hub 2-0:1.0: 1 port detected
[    3.877431] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.893840] init: - preinit -
[    4.412369] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
[    4.720733] random: procd: uninitialized urandom read (4 bytes read)
[    7.960968] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 439
[    8.008797] UBIFS (ubi0:1): recovery needed
[    8.145032] UBIFS (ubi0:1): recovery completed
[    8.148235] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    8.155944] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    8.165827] UBIFS (ubi0:1): FS size: 121927680 bytes (116 MiB, 945 LEBs), journal size 6064128 bytes (5 MiB, 47 LEBs)
[    8.176443] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[    8.183064] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 1AC3A4EF-6585-4ABE-A896-73BBEFE06787, small LPT model
[    8.196237] mount_root: overlay filesystem has not been fully initialized yet
[    8.205566] mount_root: switching to ubifs overlay
[    8.242458] urandom-seed: Seed file not found (/etc/urandom.seed)
[    8.425131] procd: - early -
[    8.426749] procd: - watchdog -
[    8.784030] lantiq,xrx200-net 1e108000.eth eth0: port 2 lost link
[    9.098273] procd: - watchdog -
[    9.100588] procd: - ubus -
[    9.183024] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.189820] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.195389] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.203016] procd: - init -
[    9.688677] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.697221] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[    9.708694] NET: Registered protocol family 8
[    9.711601] NET: Registered protocol family 20
[    9.721894] PPP generic driver version 2.4.2
[    9.730938] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.753361] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
[    9.772485] 
[    9.772485] 
[    9.772485] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
[    9.780187] 
[    9.780187] Predefined debug level: 3
[    9.791534] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    9.798215] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    9.808688] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.817555] Infineon Technologies DEU driver version 2.0.0 
[    9.823665] IFX DEU DES initialized (multiblock).
[    9.828550] IFX DEU AES initialized (multiblock).
[    9.832475] IFX DEU ARC4 initialized (multiblock).
[    9.836981] IFX DEU SHA1 initialized.
[    9.840593] IFX DEU MD5 initialized.
[    9.844195] IFX DEU SHA1_HMAC initialized.
[    9.848286] IFX DEU MD5_HMAC initialized.
[    9.859900] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[    9.911044] NET: Registered protocol family 24
[    9.930646] xt_time: kernel timezone is -0000
[   10.020698] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.540381] urandom_read: 5 callbacks suppressed
[   11.540393] random: jshn: uninitialized urandom read (4 bytes read)
[   21.200073] random: crng init done
[   25.940498] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.961364] device eth0 entered promiscuous mode
[   25.966815] br-lan: port 1(eth0.1) entered blocking state
[   25.970894] br-lan: port 1(eth0.1) entered disabled state
[   25.977017] device eth0.1 entered promiscuous mode
[   26.003104] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   29.008440] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
[   29.013388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   29.028357] br-lan: port 1(eth0.1) entered blocking state
[   29.032387] br-lan: port 1(eth0.1) entered forwarding state
[   29.048099] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[  222.544308] lantiq,xrx200-net 1e108000.eth eth0: port 2 lost link
[  222.550234] br-lan: port 1(eth0.1) entered disabled state
[  236.880336] lantiq,xrx200-net 1e108000.eth eth0: port 2 got link
[  236.885643] br-lan: port 1(eth0.1) entered blocking state
[  236.890376] br-lan: port 1(eth0.1) entered forwarding state

18 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

I jeszcze mac80211/cfg80211.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

19 Odpowiedź przez geos (edytowany przez geos 2018-11-03 18:48:10)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

wygląda na to, że te pakiety też są:

root@OpenWrt:~# opkg list-installed | grep mac
kmod-mac80211 - 4.9.120+2017-11-01-9
root@OpenWrt:~# opkg list-installed | grep cfg
kmod-cfg80211 - 4.9.120+2017-11-01-9

20 Odpowiedź przez ad2014

  • ad2014
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-04
  • Posty: 1,144

Odp: brak interfejsu wireless

szkoda czasu na szukanie  - zaoraj wszystko i wgraj najnowsze openwrt  mam F3 i teraz wgrałem najnowsze  stable   - nic nie musiałem instalowac zadnych sterownikow  , zadnych plikow dodawac   wszystko działa od razu  , oczywiscie  wszystko w terminalu , ale to tylko edycja  2 plików smile  network  ( i masz neta)   i wireless  ( domyslnie jest wyłaczone )  -  potem instalujesz co chcesz

21 Odpowiedź przez geos (edytowany przez geos 2018-11-04 12:47:14)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

niestety, to nie działa. było LEDE, wgrałem openwrt i teraz jest co jest. patrzę w logi na openwrt (https://openwrt.org/toh/zyxel/p2812hnu-f1) i jest tam linia:

[    0.232000] ralink,eeprom ralink_eep.6: using RT3062.eeprom as eeprom

u mnie w ogóle nie ma tej linii w dmesg, mimo, że plik RT3062.eeprom jest w /lib/firmware

22 Odpowiedź przez ad2014

  • ad2014
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-04
  • Posty: 1,144

Odp: brak interfejsu wireless

zobacz jeszcze jakie moduły masz załadowane   lsmod  ewentualnie załaduj go recznie  insmod (nazwa modułu)

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,376

Odp: brak interfejsu wireless

Tak z ciekawości: cofnij się do lede i zobaczy czy nadal działa wireless.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

24 Odpowiedź przez ad2014

  • ad2014
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-04
  • Posty: 1,144

Odp: brak interfejsu wireless

zobacz  jeszcze czy masz  

kmod-rt2x00-lib - 4.9.120+2017-11-01-9
kmod-rt2x00-mmio - 4.9.120+2017-11-01-9
kmod-rt2x00-pci - 4.9.120+2017-11-01-9


a jak to nie pomoże to faktycznie cofnij sie do lede

25 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: brak interfejsu wireless

wgrałem LEDE 17.01 i niestety, też nie ma wifi sad
ponownie w logu nie ma informacji o pliku eeprom.
załączam wynik lsmod i dmesg.
czy takie okoliczności przyrody wskazują na jakąś poważniejszą awarię sprzętową?

root@lede:~# lsmod
aead                    3136  0 
atm                    36400  2 pppoatm,br2684
br2684                  6496  0 
cfg80211              235168  2 rt2x00lib,mac80211
compat                 11120  3 rt2800pci,mac80211,cfg80211
crc_ccitt                992  2 rt2800lib,ppp_async
crc_itu_t                992  0 
crypto_null             2544  1 aead
cryptomgr               2080  0 
drv_dsl_cpe_api       141184  0 
drv_ifxos              12480  2 drv_dsl_cpe_api,drv_mei_cpe
drv_mei_cpe           139152  1 drv_dsl_cpe_api
dwc2                   68032  0 
eeprom_93cx6            2048  1 rt2800pci
gpio_button_hotplug     6464  0 
ip6_tables              9344  2 ip6table_mangle,ip6table_filter
ip6t_REJECT              960  2 
ip6table_filter          608  1 
ip6table_mangle         1120  1 
ip_tables               9552  3 iptable_nat,iptable_mangle,iptable_filter
ipt_MASQUERADE           640  1 
ipt_REJECT               928  2 
iptable_filter           672  1 
iptable_mangle           864  1 
iptable_nat              736  1 
ledtrig_usbport         2288  0 
ltq_deu_vr9            26544  1 
mac80211              430304  3 rt2800lib,rt2x00pci,rt2x00lib
nf_conntrack           57120  9 nf_nat_ipv4,nf_conntrack_ipv6,nf_conntrack_ipv4,xt_state,xt_conntrack,xt_CT,nf_nat_masquerade_ipv4,nf_nat,nf_conntrack_rtcache
nf_conntrack_ipv4       5440  9 
nf_conntrack_ipv6       6336  4 
nf_conntrack_rtcache    2752  0 
nf_defrag_ipv4           896  1 nf_conntrack_ipv4
nf_defrag_ipv6          9424  1 nf_conntrack_ipv6
nf_log_common           2400  2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4             3264  0 
nf_log_ipv6             3744  0 
nf_nat                 10400  4 nf_nat_ipv4,xt_nat,nf_nat_redirect,nf_nat_masquerade_ipv4
nf_nat_ipv4             4240  1 iptable_nat
nf_nat_masquerade_ipv4    1456  1 ipt_MASQUERADE
nf_nat_redirect         1088  1 xt_REDIRECT
nf_reject_ipv4          2048  1 ipt_REJECT
nf_reject_ipv6          2496  1 ip6t_REJECT
ppp_async               7424  0 
ppp_generic            21520  4 pppoe,pppox,ppp_async,pppoatm
pppoatm                 3456  0 
pppoe                   9152  0 
pppox                   1200  1 pppoe
rt2800lib             102336  2 rt2800pci,rt2800mmio
rt2800mmio              6336  1 rt2800pci
rt2800pci               4112  0 
rt2x00lib              35952  5 rt2800pci,rt2800mmio,rt2800lib,rt2x00pci,rt2x00mmio
rt2x00mmio              1856  2 rt2800pci,rt2800mmio
rt2x00pci               1472  1 rt2800pci
slhc                    4928  1 ppp_generic
x_tables               10864 23 ipt_REJECT,ipt_MASQUERADE,xt_time,xt_tcpudp,xt_state,xt_nat,xt_multiport,xt_mark,xt_mac,xt_limit,xt_conntrack,xt_comment,xt_TCPMSS,xt_REDIRECT,xt_LOG,xt_CT,iptable_mangle,iptable_filter,ip_tables,ip6t_REJECT,ip6table_mangle,ip6table_filter,ip6_tables
xt_CT                   2912  0 
xt_LOG                   736  0 
xt_REDIRECT              640  0 
xt_TCPMSS               2816  4 
xt_comment               480139 
xt_conntrack            2240 12 
xt_limit                1344 20 
xt_mac                   608  0 
xt_mark                  640  0 
xt_multiport            1216  0 
xt_nat                  1120  0 
xt_state                 704  0 
xt_tcpudp               1728 12 
xt_time                 1792  0 
root@lede:~# dmesg
[    0.000000] Linux version 4.4.42 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2996-c71e13a) ) #0 Sun Jan 29 17:03:17 2017
[    0.000000] SoC: GRX200 rev 1.2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 804ba4b0, node_mem_map 8100a780
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00001c11
[    0.000000] Readback ErrCtl register=00001c11
[    0.000000] Memory: 123404K/131072K available (3914K kernel code, 162K rwdata, 884K rodata, 1232K init, 213K bss, 7668K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] Setting up vectored interrupts
[    0.000000] CPU Clock: 500MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[    0.000010] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[    0.007856] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.042324] pid_max: default: 32768 minimum: 301
[    0.047163] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.053731] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.067595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.077295] pinctrl core: initialized pinctrl subsystem
[    0.083777] NET: Registered protocol family 16
[    0.092871] pinctrl-xway 1e100b10.pinmux: Init done
[    0.098410] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.208547] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.223131] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.228742]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.234028]   IO 0x000000001ae00000..0x000000001affffff
[    0.253048] gpio-stp-xway 1e100bb0.stp: Init done
[    0.258283] usbcore: registered new interface driver usbfs
[    0.263778] usbcore: registered new interface driver hub
[    0.269136] usbcore: registered new device driver usb
[    0.274558] PCI host bridge to bus 0000:00
[    0.278545] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.285451] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.292395] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.299251] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.307284] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.308183] clocksource: Switched to clocksource MIPS
[    0.314505] NET: Registered protocol family 2
[    0.319782] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.326677] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.333058] TCP: Hash tables configured (established 1024 bind 1024)
[    0.339563] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.345407] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.351972] NET: Registered protocol family 1
[    0.356279] PCI: CLS 0 bytes, default 32
[    0.362631] gptu: totally 6 16-bit timers/counters
[    0.367470] gptu: misc_register on minor 63
[    0.371565] gptu: succeeded to request irq 126
[    0.376055] gptu: succeeded to request irq 127
[    0.380570] gptu: succeeded to request irq 128
[    0.385082] gptu: succeeded to request irq 129
[    0.389596] gptu: succeeded to request irq 130
[    0.394109] gptu: succeeded to request irq 131
[    0.398943] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a2x.bin
[    0.406215] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7D80000
[    0.412554] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7D80000
[    0.519226] No VPEs reserved for AP/SP, not initialize VPE loader
[    0.519226] Pass maxvpes=<n> argument as kernel argument
[    0.530570] No TCs reserved for AP/SP, not initializing RTLX.
[    0.530570] Pass maxtcs=<n> argument as kernel argument
[    0.542421] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.548472] Crashlog allocated RAM at address 0x3f00000
[    0.573558] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.579284] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.592986] io scheduler noop registered
[    0.596797] io scheduler deadline registered (default)
[    0.602629] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.611528] console [ttyLTQ0] enabled
[    0.618854] bootconsole [early0] disabled
[    0.630193] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.635087] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.639701] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.647349] Scanning device for bad blocks
[    0.737358] 4 ofpart partitions found on MTD device 10000000.nand-parts
[    0.742545] Creating 4 MTD partitions on "10000000.nand-parts":
[    0.748462] 0x000000000000-0x000000040000 : "uboot"
[    0.755149] 0x000000040000-0x000000060000 : "uboot-env"
[    0.761117] 0x000000060000-0x000000260000 : "kernel"
[    0.766744] 0x000000260000-0x000008000000 : "ubi"
[    0.875364] libphy: lantiq,xrx200-mdio: probed
[    0.948917] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
[    1.016890] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:01, irq=-1)
[    1.084875] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    1.152874] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    1.220891] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
[    1.328223] ltq-cputemp cputemp@0: Current CPU die temperature: 48.5 °C
[    1.333769] wdt 1f8803f0.watchdog: Init done
[    1.341917] NET: Registered protocol family 10
[    1.352085] NET: Registered protocol family 17
[    1.355220] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.367734] 8021q: 802.1Q VLAN Support v1.8
[    1.375955] UBI: auto-attach mtd3
[    1.377703] ubi0: attaching mtd3
[    1.563848] ubi0: scanning is finished
[    1.578249] ubi0: attached mtd3 (name "ubi", size 125 MiB)
[    1.582336] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.589177] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.595877] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[    1.602667] ubi0: good PEBs: 1005, bad PEBs: 0, corrupted PEBs: 0
[    1.608760] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.615986] ubi0: max/mean erase counter: 13/7, WL threshold: 4096, image sequence number: 1312724221
[    1.625211] ubi0: available PEBs: 0, total reserved PEBs: 1005, PEBs reserved for bad PEB handling: 20
[    1.634580] ubi0: background thread "ubi_bgt0d" started, PID 317
[    1.642208] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.646297] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.660388] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    1.669859] Freeing unused kernel memory: 1232K (804dc000 - 80610000)
[    2.561701] init: Console is alive
[    2.563930] init: - watchdog -
[    3.637823] dwc2 1e101000.ifxhcd: requested GPIO 495
[    4.212332] eth0: port 2 got link
[    4.496373] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    4.499967] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    4.507275] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    4.512808] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    4.520250] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    4.527692] hub 1-0:1.0: USB hub found
[    4.530656] hub 1-0:1.0: 1 port detected
[    5.392373] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    5.395966] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    5.403274] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    5.408807] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    5.416248] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    5.423712] hub 2-0:1.0: USB hub found
[    5.426672] hub 2-0:1.0: 1 port detected
[    5.432957] init: - preinit -
[    6.093119] random: procd: uninitialized urandom read (4 bytes read, 26 bits of entropy available)
[    9.331355] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 395
[    9.359457] UBIFS (ubi0:1): recovery needed
[    9.457877] UBIFS (ubi0:1): recovery completed
[    9.460995] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    9.468734] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    9.478648] UBIFS (ubi0:1): FS size: 121927680 bytes (116 MiB, 945 LEBs), journal size 6064128 bytes (5 MiB, 47 LEBs)
[    9.489260] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[    9.495884] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 100313A5-C734-42AE-B4B9-F6DB3912EFD9, small LPT model
[    9.510954] mount_root: switching to ubifs overlay
[    9.521365] urandom-seed: Seeding with /etc/urandom.seed
[    9.726590] procd: - early -
[    9.728252] procd: - watchdog -
[   10.300217] eth0: port 2 lost link
[   10.375538] procd: - ubus -
[   10.453317] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.462027] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.470390] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.478908] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.488457] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.496827] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.506063] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.515042] random: ubusd: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
[   10.524329] procd: - init -
[   10.991623] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[   11.002536] NET: Registered protocol family 8
[   11.005505] NET: Registered protocol family 20
[   11.016231] PPP generic driver version 2.4.2
[   11.026273] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.049408] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
[   11.049408] 
[   11.049408] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
[   11.072608] 
[   11.072608] Predefined debug level: 3
[   11.084645] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[   11.090834] Backport generated by backports.git backports-20160324-9-g0e38f5c
[   11.102572] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.111721] Infineon Technologies DEU driver version 2.0.0 
[   11.117817] IFX DEU DES initialized (multiblock).
[   11.122078] IFX DEU AES initialized (multiblock).
[   11.126234] IFX DEU ARC4 initialized (multiblock).
[   11.130854] IFX DEU SHA1 initialized.
[   11.134452] IFX DEU MD5 initialized.
[   11.138078] IFX DEU SHA1_HMAC initialized.
[   11.142112] IFX DEU MD5_HMAC initialized.
[   11.153018] nf_conntrack version 0.5.0 (1947 buckets, 7788 max)
[   11.177652] NET: Registered protocol family 24
[   11.200124] xt_time: kernel timezone is -0000
[   12.970495] random: jshn: uninitialized urandom read (4 bytes read, 53 bits of entropy available)
[   21.175453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.261130] device eth0 entered promiscuous mode
[   21.266722] device eth0.1 entered promiscuous mode
[   21.272969] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   21.664474] eth0: port 2 got link
[   21.666523] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.694278] br-lan: port 1(eth0.1) entered forwarding state
[   21.698534] br-lan: port 1(eth0.1) entered forwarding state
[   21.728283] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   23.700194] br-lan: port 1(eth0.1) entered forwarding state
[   31.383518] random: nonblocking pool is initialized