FAQ o OpenWrt | Sprzedam różne routery | Oddam

tenobcy · 2015-12-29 12:27:02

tenobcy
Użytkownik
Nieaktywny

Zarejestrowany: 2013-08-15
Posty: 450

Temat: 3ginfo, gnokii, ussd na modemie MF100?

Potrzebuje na TL-WR710n-v1 uruchomić internet z obsługą SMSów i kodów ussd z wykorzystaniem 3ginfo na starym modemie MF100 z Netii. Sam internet owszem działa choć jest identyfikowany jako NETIA przy czym karta jest Virgin Mobile (sieć na Playu):

root@OpenWrt:~# 3ginfo
Status: Połączony
Czas polaczenia: 0d, 00:28:40
Przeslano danych: 360.8 KiB / 246.1 KiB
Operator: NETIA
Tryb pracy: HSDPA
Sila sygnalu: 41%
Urzadzenie: ZTE INCORPORATED MF100
MCC MNC: - -
LAC: - (-)
LCID: - (-)
RNC: - (-)
eNB: - (-)
CID: - (-)
CSQ: 13
RSSI: -87 dBm
RSCP: -88 dBm
Ec/IO: -6 dB
RSRP: - dBm
RSRQ: - dB

wysyłanie smsów także działa, ale odbieranie smsów i wykonywanie kodów ussd już nie Przy próbie odbioru SMSów w konsoli przez gnokii otrzymuje:

root@OpenWrt:~# gnokii --identify
GNOKII Version 0.6.21
IMEI         : 353164044087622
Manufacturer : ZTE INCORPORATED
Model        : MF100
Product name : MF100
Revision     : BD_NTPLP671A1V1.0.0

root@OpenWrt:~# gnokii --getsms SM 0 end
GNOKII Version 0.6.21
0. Inbox Message (read)
Date/time: 17/10/2015 13:28:54 +0200
Sender: Virgin Msg Center: +48790998250
TUTAJ SĄ SMSY WCZEŚNIEJ ODEBRANE I ZAPISANE NA KARCIE
GetSMS SM 15 failed! (The given location is empty.)
GetSMS SM 16 failed! (The given location is empty.)
GetSMS SM 17 failed! (The given location is empty.)
GetSMS SM 18 failed! (The given location is empty.)
GetSMS SM 19 failed! (The given location is empty.)
GetSMS SM 20 failed! (The given location is empty.)
GetSMS SM 21 failed! (The given location is empty.)
GetSMS SM 22 failed! (The given location is empty.)
GetSMS SM 23 failed! (The given location is empty.)
GetSMS SM 24 failed! (The given location is empty.)

Proszę o poradę co może być tego przyczyną, poniżej moje konfiguracje:

root@OpenWrt:~# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.18
S:  Manufacturer=Linux 3.18.23 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0031 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=P671A1NETD010000
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

root@OpenWrt:~# logread
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.280000] usbcore: registered new interface driver sierra_net
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.380000] usbcore: registered new interface driver cdc_mbim
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.400000] usbcore: registered new interface driver option
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.400000] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.410000] option 1-1:1.0: GSM modem (1-port) converter detected
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.410000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.420000] option 1-1:1.1: GSM modem (1-port) converter detected
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.430000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.430000] option 1-1:1.3: GSM modem (1-port) converter detected
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.440000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.500000] ath: EEPROM regdomain: 0x0
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.500000] ath: EEPROM indicates default country code should be used
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.500000] ath: doing EEPROM country->regdmn map search
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.500000] ath: country maps to regdmn code: 0x3a
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.500000] ath: Country alpha2 being used: US
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.500000] ath: Regpair used: 0x3a
Tue Dec 29 10:46:02 2015 kern.debug kernel: [   18.520000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.520000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.550000] cfg80211: Calling CRDA for country: US
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.550000] cfg80211: Regulatory domain changed to country: US
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.560000] cfg80211:  DFS Master region: FCC
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.560000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.570000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.580000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.590000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.600000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Tue Dec 29 10:46:02 2015 kern.info kernel: [   18.610000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Dec 29 10:46:06 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Tue Dec 29 10:46:07 2015 daemon.err block: /dev/mtdblock3 is already mounted
Tue Dec 29 10:46:09 2015 authpriv.info dropbear[1381]: Not backgrounding
Tue Dec 29 10:46:10 2015 user.emerg syslog: SQM: QDISC fq_codel is useable.
Tue Dec 29 10:46:10 2015 user.notice SQM: QDISC fq_codel is useable.
Tue Dec 29 10:46:10 2015 user.emerg syslog: SQM: QDISC efq_codel is NOT useable.
Tue Dec 29 10:46:10 2015 user.notice SQM: QDISC efq_codel is NOT useable.
Tue Dec 29 10:46:10 2015 user.emerg syslog: SQM: QDISC nfq_codel is NOT useable.
Tue Dec 29 10:46:10 2015 user.notice SQM: QDISC nfq_codel is NOT useable.
Tue Dec 29 10:46:10 2015 user.emerg syslog: SQM: QDISC sfq is useable.
Tue Dec 29 10:46:10 2015 user.notice SQM: QDISC sfq is useable.
Tue Dec 29 10:46:11 2015 user.emerg syslog: SQM: QDISC codel is useable.
Tue Dec 29 10:46:11 2015 user.notice SQM: QDISC codel is useable.
Tue Dec 29 10:46:11 2015 user.emerg syslog: SQM: QDISC ns2_codel is NOT useable.
Tue Dec 29 10:46:11 2015 user.notice SQM: QDISC ns2_codel is NOT useable.
Tue Dec 29 10:46:11 2015 user.emerg syslog: SQM: QDISC pie is useable.
Tue Dec 29 10:46:11 2015 user.notice SQM: QDISC pie is useable.
Tue Dec 29 10:46:11 2015 user.emerg syslog: SQM: QDISC cake is NOT useable.
Tue Dec 29 10:46:11 2015 user.notice SQM: QDISC cake is NOT useable.
Tue Dec 29 10:46:13 2015 kern.info kernel: [   31.920000] device eth1 entered promiscuous mode
Tue Dec 29 10:46:13 2015 kern.info kernel: [   31.920000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'lan' is enabled
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'lan' is setting up now
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'lan' is now up
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'loopback' is enabled
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'loopback' is now up
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'wan' is setting up now
Tue Dec 29 10:46:13 2015 kern.info kernel: [   31.980000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'wan6' is enabled
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Network device 'lo' link is up
Tue Dec 29 10:46:13 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.820000] cfg80211: Calling CRDA for country: PL
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.820000] cfg80211: Regulatory domain changed to country: PL
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.820000] cfg80211:  DFS Master region: ETSI
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.830000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.840000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.850000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.860000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.870000] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
Tue Dec 29 10:46:14 2015 kern.info kernel: [   33.870000] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Dec 29 10:46:15 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Dec 29 10:46:16 2015 daemon.notice pppd[1780]: pppd 2.4.7 started by root, uid 0
Tue Dec 29 10:46:18 2015 kern.info kernel: [   36.950000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Dec 29 10:46:18 2015 kern.info kernel: [   36.960000] device wlan0 entered promiscuous mode
Tue Dec 29 10:46:18 2015 kern.info kernel: [   36.960000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 29 10:46:18 2015 kern.info kernel: [   36.970000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 29 10:46:18 2015 kern.info kernel: [   36.990000] br-lan: port 2(wlan0) entered disabled state
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: abort on (BUSY)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: abort on (NO CARRIER)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: abort on (ERROR)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: report (CONNECT)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: timeout set to 10 seconds
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: send (AT&F^M)
Tue Dec 29 10:46:18 2015 daemon.notice netifd: radio0 (1641): Configuration file: /var/run/hostapd-phy0.conf
Tue Dec 29 10:46:18 2015 daemon.notice netifd: radio0 (1641): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Dec 29 10:46:18 2015 daemon.notice netifd: radio0 (1641): Using interface wlan0 with hwaddr 64:66:b3:85:16:b8 and ssid "wrt"
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: expect (OK)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: AT&F^M^M
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: OK
Tue Dec 29 10:46:18 2015 local2.info chat[1850]:  -- got it
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: send (ATE1^M)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: expect (OK)
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: ^M
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: ATE1^M^M
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: OK
Tue Dec 29 10:46:18 2015 local2.info chat[1850]:  -- got it
Tue Dec 29 10:46:18 2015 local2.info chat[1850]: send (AT+CGDCONT=1,"IP","internet"^M)
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: timeout set to 30 seconds
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: expect (OK)
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: ^M
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: AT+CGDCONT=1,"IP","internet"^M^M
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: OK
Tue Dec 29 10:46:19 2015 local2.info chat[1850]:  -- got it
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: send (ATD*99***1#^M)
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: expect (CONNECT)
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: ^M
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: ATD*99***1#^M^M
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: CONNECT
Tue Dec 29 10:46:19 2015 local2.info chat[1850]:  -- got it
Tue Dec 29 10:46:19 2015 local2.info chat[1850]: send ( ^M)
Tue Dec 29 10:46:19 2015 daemon.info pppd[1780]: Serial connection established.
Tue Dec 29 10:46:19 2015 kern.info kernel: [   38.300000] 3g-wan: renamed from ppp0
Tue Dec 29 10:46:19 2015 daemon.info pppd[1780]: Using interface 3g-wan
Tue Dec 29 10:46:19 2015 daemon.notice pppd[1780]: Connect: 3g-wan <--> /dev/ttyUSB2
Tue Dec 29 10:46:21 2015 kern.info kernel: [   40.130000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 29 10:46:21 2015 kern.info kernel: [   40.130000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 29 10:46:21 2015 kern.info kernel: [   40.140000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Dec 29 10:46:21 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Dec 29 10:46:21 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Dec 29 10:46:21 2015 kern.info kernel: [   40.160000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Dec 29 10:46:21 2015 daemon.notice netifd: radio0 (1641): wlan0: interface state COUNTRY_UPDATE->ENABLED
Tue Dec 29 10:46:21 2015 daemon.notice netifd: radio0 (1641): wlan0: AP-ENABLED
Tue Dec 29 10:46:21 2015 daemon.notice netifd: Network device 'wlan0' link is up
Tue Dec 29 10:46:21 2015 daemon.info procd: - init complete -
Tue Dec 29 10:46:23 2015 kern.info kernel: [   42.130000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 29 10:46:23 2015 daemon.warn pppd[1780]: Could not determine remote IP address: defaulting to 10.64.64.64
Tue Dec 29 10:46:23 2015 daemon.notice pppd[1780]: local  IP address 109.243.108.156
Tue Dec 29 10:46:23 2015 daemon.notice pppd[1780]: remote IP address 10.64.64.64
Tue Dec 29 10:46:23 2015 daemon.notice pppd[1780]: primary   DNS address 89.108.195.21
Tue Dec 29 10:46:23 2015 daemon.notice pppd[1780]: secondary DNS address 89.108.202.21
Tue Dec 29 10:46:23 2015 daemon.notice netifd: Network device '3g-wan' link is up
Tue Dec 29 10:46:23 2015 daemon.notice netifd: Interface 'wan' is now up
Tue Dec 29 10:46:23 2015 daemon.notice netifd: Network alias '3g-wan' link is up
Tue Dec 29 10:46:23 2015 daemon.notice netifd: Interface 'wan_6' is enabled
Tue Dec 29 10:46:23 2015 daemon.notice netifd: Interface 'wan_6' has link connectivity
Tue Dec 29 10:46:23 2015 daemon.notice netifd: Interface 'wan_6' is setting up now
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: started, version 2.73 cachesize 150
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: DNS service limited to local subnets
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq-dhcp[2009]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: using local addresses only for domain lan
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: reading /tmp/resolv.conf.auto
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: using local addresses only for domain lan
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: using nameserver 89.108.195.21#53
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: using nameserver 89.108.202.21#53
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: read /etc/hosts - 1 addresses
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq[2009]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 29 10:46:24 2015 daemon.info dnsmasq-dhcp[2009]: read /etc/ethers - 0 addresses
Tue Dec 29 10:46:24 2015 daemon.info hostapd: wlan0: STA f8:1a:67:07:69:97 IEEE 802.11: authenticated
Tue Dec 29 10:46:24 2015 daemon.info hostapd: wlan0: STA f8:1a:67:07:69:97 IEEE 802.11: associated (aid 1)
Tue Dec 29 10:46:24 2015 daemon.info hostapd: wlan0: STA f8:1a:67:07:69:97 WPA: pairwise key handshake completed (RSN)
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2009]: exiting on receipt of SIGTERM
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: started, version 2.73 cachesize 150
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: DNS service limited to local subnets
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq-dhcp[2105]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: using local addresses only for domain lan
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: reading /tmp/resolv.conf.auto
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: using local addresses only for domain lan
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: using nameserver 89.108.195.21#53
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: using nameserver 89.108.202.21#53
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: read /etc/hosts - 1 addresses
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 29 10:46:26 2015 daemon.info dnsmasq-dhcp[2105]: read /etc/ethers - 0 addresses
Tue Dec 29 10:46:27 2015 user.notice firewall: Reloading firewall due to ifup of wan (3g-wan)
Tue Dec 29 10:46:29 2015 user.notice ddns-scripts[2232]: myddns_ipv4: PID '2232' started at 2015-12-29 10:46
Tue Dec 29 10:46:29 2015 user.warn ddns-scripts[2232]: myddns_ipv4: Service section disabled! - TERMINATE
Tue Dec 29 10:46:29 2015 user.warn ddns-scripts[2232]: myddns_ipv4: PID '2232' exit WITH ERROR '1' at 2015-12-29 10:46
Tue Dec 29 10:46:37 2015 kern.notice kernel: [   56.440000] random: nonblocking pool is initialized
Tue Dec 29 10:46:50 2015 daemon.warn pppd[1780]: IPV6CP: timeout sending Config-Requests
Tue Dec 29 10:46:54 2015 daemon.info hostapd: wlan0: STA dc:a9:71:1d:91:1f IEEE 802.11: authenticated
Tue Dec 29 10:46:54 2015 daemon.info hostapd: wlan0: STA dc:a9:71:1d:91:1f IEEE 802.11: associated (aid 2)
Tue Dec 29 10:46:54 2015 daemon.info hostapd: wlan0: STA dc:a9:71:1d:91:1f WPA: pairwise key handshake completed (RSN)
Tue Dec 29 10:46:54 2015 daemon.info dnsmasq-dhcp[2105]: DHCPREQUEST(br-lan) 192.168.1.241 dc:a9:71:1d:91:1f
Tue Dec 29 10:46:54 2015 daemon.info dnsmasq-dhcp[2105]: DHCPACK(br-lan) 192.168.1.241 dc:a9:71:1d:91:1f ge620dx
Tue Dec 29 10:46:54 2015 daemon.warn odhcpd[1313]: DHCPV6 SOLICIT IA_NA from 000100011da2a4956c626d30909e on br-lan: ok fd75:c2d1:b47a::e94/128
Tue Dec 29 10:46:55 2015 daemon.info dnsmasq[2105]: read /etc/hosts - 1 addresses
Tue Dec 29 10:46:55 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/odhcpd - 0 addresses
Tue Dec 29 10:46:55 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 29 10:46:55 2015 daemon.info dnsmasq-dhcp[2105]: read /etc/ethers - 0 addresses
Tue Dec 29 10:46:55 2015 daemon.warn odhcpd[1313]: DHCPV6 SOLICIT IA_NA from 000100011da2a4956c626d30909e on br-lan: ok fd75:c2d1:b47a::e94/128
Tue Dec 29 10:46:56 2015 daemon.warn odhcpd[1313]: DHCPV6 REQUEST IA_NA from 000100011da2a4956c626d30909e on br-lan: ok fd75:c2d1:b47a::e94/128
Tue Dec 29 10:46:56 2015 daemon.info dnsmasq[2105]: read /etc/hosts - 1 addresses
Tue Dec 29 10:46:56 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/odhcpd - 1 addresses
Tue Dec 29 10:46:56 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 29 10:46:56 2015 daemon.info dnsmasq-dhcp[2105]: read /etc/ethers - 0 addresses
Tue Dec 29 10:48:42 2015 daemon.info pppd[1780]: System time change detected.
Tue Dec 29 10:51:28 2015 authpriv.info dropbear[3824]: Child connection from 192.168.1.241:59564
Tue Dec 29 10:51:41 2015 authpriv.notice dropbear[3824]: Password auth succeeded for 'root' from 192.168.1.241:59564
Tue Dec 29 10:53:33 2015 daemon.warn odhcpd[1313]: DHCPV6 SOLICIT IA_NA from 000100011da2a4956c626d30909e on br-lan: ok fd75:c2d1:b47a::e94/128
Tue Dec 29 10:53:33 2015 daemon.info dnsmasq[2105]: read /etc/hosts - 1 addresses
Tue Dec 29 10:53:33 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/odhcpd - 0 addresses
Tue Dec 29 10:53:33 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 29 10:53:33 2015 daemon.info dnsmasq-dhcp[2105]: read /etc/ethers - 0 addresses
Tue Dec 29 10:53:34 2015 daemon.warn odhcpd[1313]: DHCPV6 REQUEST IA_NA from 000100011da2a4956c626d30909e on br-lan: ok fd75:c2d1:b47a::e94/128
Tue Dec 29 10:53:34 2015 daemon.info dnsmasq[2105]: read /etc/hosts - 1 addresses
Tue Dec 29 10:53:34 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/odhcpd - 1 addresses
Tue Dec 29 10:53:34 2015 daemon.info dnsmasq[2105]: read /tmp/hosts/dhcp - 1 addresses
Tue Dec 29 10:53:34 2015 daemon.info dnsmasq-dhcp[2105]: read /etc/ethers - 0 addresses
Tue Dec 29 10:56:37 2015 authpriv.info dropbear[3824]: Exit (root): Exited normally
Tue Dec 29 10:56:46 2015 authpriv.info dropbear[6997]: Child connection from 192.168.1.241:59674
Tue Dec 29 10:56:54 2015 authpriv.notice dropbear[6997]: Password auth succeeded for 'root' from 192.168.1.241:59674

Konfiguracja wanu:

root@OpenWrt:~# cat /etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd75:c2d1:b47a::/48'

config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config interface 'wan'
        option proto '3g'
        option apn 'internet'
        option device '/dev/ttyUSB2'
        option service 'umts'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

3ginfo:

root@OpenWrt:~# cat /etc/config/3ginfo

config 3ginfo
        option http_port '81'
        option language 'pl'
        option device '/dev/ttyUSB1'

wan idzie na /dev/ttyUSB2 na innych portach nie łączy, a 3ginfo oraz gnokii na /dev/ttyUSB1 bo tutaj także na innych nie wykrywa modemu.

Z góry dzięki za wszelką pomoc.

Cezary · 2015-12-29 14:03:39

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,432

Odp: 3ginfo, gnokii, ussd na modemie MF100?

SM <- użyj innego typu pamięci jak już.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

tenobcy · 2015-12-29 14:26:00

tenobcy
Użytkownik
Nieaktywny

Zarejestrowany: 2013-08-15
Posty: 450

Odp: 3ginfo, gnokii, ussd na modemie MF100?

Ok dzięki zmieniłem na ME teraz wysyła i odbiera smsy pomimo, że w dalszym ciągu występuje błąd tego ty[u "GetSMS SM 21 failed! (The given location is empty.)" zmieniłem typ pamięci w /usr/share/3ginfo/cgi-bin/sms.sh i przez stronę także idzie.
A co z kodami USSD? Dalej nie działają

Cezary · 2015-12-29 15:07:16

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,432

Odp: 3ginfo, gnokii, ussd na modemie MF100?

To akurat błąd nie jest, tak gnokii wyświetla dodaj sobie 2>/dev/null na końcu polecenie jak cie to denerwuje

Jeżeli ussd153 nie chce działać to musisz inne rozwiązanie znaleźć...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

FAQ o OpenWrt | Sprzedam różne routery | Oddam

3ginfo, gnokii, ussd na modemie MF100?

Posty: 4

1 Temat przez tenobcy 2015-12-29 12:27:02 (edytowany przez tenobcy 2015-12-29 12:29:54)

Temat: 3ginfo, gnokii, ussd na modemie MF100?

2 Odpowiedź przez Cezary 2015-12-29 14:03:39

Odp: 3ginfo, gnokii, ussd na modemie MF100?

3 Odpowiedź przez tenobcy 2015-12-29 14:26:00 (edytowany przez tenobcy 2015-12-29 14:30:00)

Odp: 3ginfo, gnokii, ussd na modemie MF100?

4 Odpowiedź przez Cezary 2015-12-29 15:07:16

Odp: 3ginfo, gnokii, ussd na modemie MF100?

Posty: 4