26 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

A /etc/init.d/fstab start robi swapa?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

27 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

U mnie teraz jak zrobie opkg install extroot i reboot, router nie startuje mryga sobie power i nie ma do niego dostepu, flashowac trzeba od nowa hmm.

28 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Nie, zwykłe failsafe.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

29 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

poczytalem troche o failsafe i nadal nie rozumiem czy po instalacji extroota router domyslnie robi failsafe ? I dlaczego nie moge sie do niego nawet telnetowac pomimo ustawienia statycznego IP na 192.168.1.*

30 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Nie. Po zainstalowaniu i aktywowaniu extroota podmieniana jest zawartość części obszary flasha na której są trzymane wszystkie zmiany w systemie. Więc jak aktywujesz extroota to system zachowuje się tak jak świeżo po flashowaniu - czyli nie ma żadnych ustawień, wszystko jest domyślne.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

31 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary napisał/a:

Nie. Po zainstalowaniu i aktywowaniu extroota podmieniana jest zawartość części obszary flasha na której są trzymane wszystkie zmiany w systemie. Więc jak aktywujesz extroota to system zachowuje się tak jak świeżo po flashowaniu - czyli nie ma żadnych ustawień, wszystko jest domyślne.

Ja aby zainstalowalem extroota bez aktywowania i wchodzi w failsafe. Teraz kompiluje wlasnego openwrt z extrootem wsrodku zobacze czy bedzie roznica

32 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Jeżeli tylko zainstalowałeś pakiet to nic innego się nie dzieje. To tak ja bys zainstalować dowolny inny program. Chyba ze akurat miałeś pecha i jffs się Ci rozjechał.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

33 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

majerotto napisał/a:

jednak nie mogłem spać smile
zrobiłem partycje ext3 na penie i config fstab:
teraz po reboot nic się nie montuje. nawet swap

zrob mkswap /dev/scsi/host0/bus0/target0/lun0/part1   u mnie pomoglo ze swapem

34 Odpowiedź przez majerotto

  • Zarejestrowany: 2010-05-03
  • Posty: 53

Odp: fstab i extroot

Cezary napisał/a:

A /etc/init.d/fstab start robi swapa?

wpisałem /etc/init.d/fstab start

root@OpenWrt:~# /etc/init.d/fstab start
mkdir: cannot create directory '': No such file or directory

a potem free

root@OpenWrt:~# free
              total         used         free       shared      buffers
  Mem:        30532        20412        10120            0         1532
 Swap:       488424            0       488424
Total:       518956        20412       498544

czyli jak z palca dam mu start to swap pójdzie ale nie zrobi extroota bo nie może zrobić katalogu ''
lipa

35 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Ale wy kombinujecie. @majerotto: tak ma być. katalogu pustego nie zrobi. Jak uruchomiłeś to z palca to próbuje wykonać sekcję mount (wpis o rootfs ignoruje), ale nie może tego zrobić bo target nie jest określony. Jak system startuje to z kolei bierze sekcje w ktorej jest rootfs i robi z tego overlay. Target ignoruje bo z góry wiadomo gdzie i po co to ma być.

To jest proste ja drut, a szukacie dziury w całym.

1. Zainstalować block-mount, block-extroot, i system plików jak nie ma
2. /etc/init.d/fstab enable
3. zmienić wpisy w /etc/config/fstab
4. przeformatować i podłaczyć nośnik z takim systemem plików jak jest w konfigu
5 reboot.

Naprawdę sie to w 10 s robi.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

36 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary napisał/a:

Ale wy kombinujecie. @majerotto: tak ma być. katalogu pustego nie zrobi. Jak uruchomiłeś to z palca to próbuje wykonać sekcję mount (wpis o rootfs ignoruje), ale nie może tego zrobić bo target nie jest określony. Jak system startuje to z kolei bierze sekcje w ktorej jest rootfs i robi z tego overlay. Target ignoruje bo z góry wiadomo gdzie i po co to ma być.

To jest proste ja drut, a szukacie dziury w całym.

1. Zainstalować block-mount, block-extroot, i system plików jak nie ma
2. /etc/init.d/fstab enable
3. zmienić wpisy w /etc/config/fstab
4. przeformatować i podłaczyć nośnik z takim systemem plików jak jest w konfigu
5 reboot.

Naprawdę sie to w 10 s robi.

Drugi dzien juz sie mecze, w teori niby wszystko jest ok, wszystkie punkty ktore wymieniles sa zrobione.
Punkt 1

root@OpenWrt:~# opkg list-installed | grep block
block-extroot - 0.0.1-2
block-hotplug - 0.1.0-2
block-mount - 0.1.0-2

root@OpenWrt:~# uname -a
Linux OpenWrt 2.4.37.9 #3 Mon Jan 3 15:18:50 CET 2011 mips GNU/Linux

Punkt 2 zrobiony
Punkt 3

root@OpenWrt:~# cat /etc/config/fstab
config global automount
    option from_fstab 1
    option anon_mount 1
    
config global autoswap
    option from_fstab 1
    option anon_swap 0
    
config mount
    option device /dev/scsi/host0/bus0/target0/lun0/part1
    option fstype ext3
    option options    rw,sync
    option enabled    1
    option enabled_fsck 0
    option is_rootfs 1
config swap
    option device    /dev/scsi/host0/bus0/target0/lun0/part2
    option enabled    0

Punkt 4 , filesystemy zainstalowane, pendrive przeformatowany, normalnie sie montuje automatycznie gdy is_rootfs=0, sprawdzony e2fsck - jest clean

Tak sobie jeszcze mysle bo zrobilem swoj openwrt z wbudowanym extrootem i block-mountem, hotplugiem, filesystemami, usb etc... ale root system jest squashfs czy nie powinien byc jffs2 ?

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw)
/dev/mtdblock/4 on /overlay type jffs2 (rw)
mini_fo:/overlay on / type mini_fo (rw)
none on /proc/bus/usb type usbfs (rw)

Wydaje mi sie ze w logread tez jest mkdir cant create directory .... spowodowany przez fstab start

root@OpenWrt:~# logread | grep mkdir
Jan  3 20:05:02 OpenWrt user.info sysinit: mkdir: cannot create directory '': No such file or directory

a tutaj caly logread

root@OpenWrt:~# logread
Jan  3 14:07:00 OpenWrt syslog.info syslogd started: BusyBox v1.15.3
Jan  3 14:07:00 OpenWrt user.notice kernel: klogd started: BusyBox v1.15.3 (2011-01-03 14:59:07 CET)
Jan  3 14:07:00 OpenWrt user.warn kernel: CPU revision is: 00029029
Jan  3 14:07:00 OpenWrt user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  3 14:07:00 OpenWrt user.warn kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan  3 14:07:00 OpenWrt user.warn kernel: Linux version 2.4.37.9 (norek@norek) (gcc version 3.4.6 (OpenWrt-2.0)) #3 Mon Jan 3 15:18:50 CET 2011
Jan  3 14:07:00 OpenWrt user.warn kernel: Setting the PFC to its default value
Jan  3 14:07:00 OpenWrt user.warn kernel: Determined physical RAM map:
Jan  3 14:07:00 OpenWrt user.warn kernel:  memory: 02000000 @ 00000000 (usable)
Jan  3 14:07:00 OpenWrt user.warn kernel: On node 0 totalpages: 8192
Jan  3 14:07:00 OpenWrt user.warn kernel: zone(0): 8192 pages.
Jan  3 14:07:00 OpenWrt user.warn kernel: zone(1): 0 pages.
Jan  3 14:07:00 OpenWrt user.warn kernel: zone(2): 0 pages.
Jan  3 14:07:00 OpenWrt user.warn kernel: Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
Jan  3 14:07:00 OpenWrt user.warn kernel: CPU: BCM5354 rev 3 at 240 MHz
Jan  3 14:07:00 OpenWrt user.warn kernel: Using 120.000 MHz high precision timer.
Jan  3 14:07:00 OpenWrt user.warn kernel: Calibrating delay loop... 237.56 BogoMIPS
Jan  3 14:07:00 OpenWrt user.info kernel: Memory: 30456k/32768k available (1440k kernel code, 2312k reserved, 100k data, 84k init, 0k highmem)
Jan  3 14:07:00 OpenWrt user.info kernel: Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Jan  3 14:07:00 OpenWrt user.info kernel: Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Jan  3 14:07:00 OpenWrt user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Jan  3 14:07:00 OpenWrt user.info kernel: Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  3 14:07:01 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan  3 14:07:01 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan  3 14:07:03 OpenWrt user.info kernel: SCSI subsystem driver Revision: 1.00
Jan  3 14:07:03 OpenWrt user.debug kernel: eth0.0: add 01:00:5e:00:00:01 mcast address to master interface
Jan  3 14:07:04 OpenWrt user.debug kernel: eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
Jan  3 14:07:04 OpenWrt user.info kernel: eth0.0: dev_set_promiscuity(master, 1)
Jan  3 14:07:04 OpenWrt user.info kernel: device eth0 entered promiscuous mode
Jan  3 14:07:04 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode
Jan  3 14:07:04 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering learning state
Jan  3 14:07:04 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state
Jan  3 14:07:04 OpenWrt user.info kernel: br-lan: topology change detected, propagating
Jan  3 14:07:05 OpenWrt user.info kernel: usb.c: registered new driver usbdevfs
Jan  3 14:07:05 OpenWrt user.info kernel: usb.c: registered new driver hub
Jan  3 14:07:08 OpenWrt user.debug kernel: PCI: Setting latency timer of device 00:05.0 to 64
Jan  3 14:07:08 OpenWrt user.emerg kernel: PCI/DMA
Jan  3 14:07:08 OpenWrt user.emerg kernel: wl0: wlc_attach: chiprev 3 coreunit 0 corerev 13 cccap 0x104007ea maccap 0x30482205 band 2.4G, phy_type 5 phy_rev 0 ana_rev 6
Jan  3 14:07:08 OpenWrt user.warn kernel: wl0: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.5
Jan  3 14:07:08 OpenWrt user.info sysinit: Warning: loading wl will taint the kernel: non-GPL license - Proprietary
Jan  3 14:07:08 OpenWrt user.info sysinit:   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Jan  3 14:07:09 OpenWrt user.info kernel: CSLIP: code copyright 1989 Regents of the University of California
Jan  3 14:07:09 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan  3 14:07:09 OpenWrt user.info kernel: Journalled Block Device driver loaded
Jan  3 14:07:10 OpenWrt user.warn kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan  3 14:07:10 OpenWrt user.info kernel: SB USB20H init
Jan  3 14:07:10 OpenWrt user.info kernel: SB COREREV: 2
Jan  3 14:07:10 OpenWrt user.info kernel: SB USB20H resetting
Jan  3 14:07:10 OpenWrt user.info kernel: USB20H fcr: 0x64
Jan  3 14:07:10 OpenWrt user.info kernel: USB20H shim cr: 0x8f7
Jan  3 14:07:10 OpenWrt user.debug kernel: PCI: Setting latency timer of device 00:03.1 to 64
Jan  3 14:07:10 OpenWrt user.info kernel: ehci_hcd 00:03.1: PCI device 14e4:471a
Jan  3 14:07:10 OpenWrt user.info kernel: ehci_hcd 00:03.1: irq 6, pci mem b8003800
Jan  3 14:07:10 OpenWrt user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Jan  3 14:07:10 OpenWrt user.warn kernel: ehci_hcd 00:03.1: illegal capability!
Jan  3 14:07:10 OpenWrt user.info kernel: ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan  3 14:07:10 OpenWrt user.info kernel: hub.c: USB hub found
Jan  3 14:07:10 OpenWrt user.info kernel: hub.c: 2 ports detected
Jan  3 14:07:11 OpenWrt user.warn kernel: ip_conntrack version 2.1 (5953 buckets, 5953 max) - 336 bytes per conntrack
Jan  3 14:07:11 OpenWrt user.info kernel: hub.c: new USB device 00:03.1-1, assigned address 2
Jan  3 14:07:11 OpenWrt user.info kernel: hub.c: USB hub found
Jan  3 14:07:11 OpenWrt user.info kernel: hub.c: 2 ports detected
Jan  3 14:07:11 OpenWrt user.info kernel: SB USB20H init
Jan  3 14:07:11 OpenWrt user.info kernel: SB COREREV: 2
Jan  3 14:07:11 OpenWrt user.info kernel: USB20H fcr: 0x64
Jan  3 14:07:11 OpenWrt user.info kernel: USB20H shim cr: 0x8f7
Jan  3 14:07:11 OpenWrt user.debug kernel: PCI: Setting latency timer of device 00:03.0 to 64
Jan  3 14:07:11 OpenWrt user.info kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan  3 14:07:11 OpenWrt user.info kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan  3 14:07:11 OpenWrt user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Jan  3 14:07:12 OpenWrt user.info kernel: hub.c: USB hub found
Jan  3 14:07:12 OpenWrt user.info kernel: hub.c: 2 ports detected
Jan  3 14:07:12 OpenWrt user.info kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Jan  3 14:07:12 OpenWrt user.info kernel: Initializing USB Mass Storage driver...
Jan  3 14:07:12 OpenWrt user.info kernel: usb.c: registered new driver usb-storage
Jan  3 14:07:12 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan  3 14:07:12 OpenWrt user.info kernel: hub.c: new USB device 00:03.1-1.1, assigned address 3
Jan  3 14:07:12 OpenWrt user.warn kernel: fuse init (API version 7.5)
Jan  3 14:07:12 OpenWrt user.warn kernel: fuse distribution version: 2.5.3
Jan  3 14:07:12 OpenWrt user.warn kernel: fuse init: DCACHE_BUG enabled
Jan  3 14:07:13 OpenWrt user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  3 14:07:13 OpenWrt user.warn kernel:   Vendor: Kingston  Model: DataTraveler II+  Rev: 1.13
Jan  3 14:07:13 OpenWrt user.warn kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  3 14:07:13 OpenWrt user.warn kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Jan  3 14:07:13 OpenWrt user.warn kernel: SCSI device sda: 502784 512-byte hdwr sectors (257 MB)
Jan  3 14:07:13 OpenWrt user.warn kernel: sda: Write Protect is off
Jan  3 14:07:13 OpenWrt user.info kernel: Partition check:
Jan  3 14:07:13 OpenWrt user.info kernel:  /dev/scsi/host0/bus0/target0/lun0: p1 p2
Jan  3 14:07:13 OpenWrt user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Jan  3 14:07:13 OpenWrt user.debug kernel: USB Mass Storage device found at 3
Jan  3 14:07:14 OpenWrt user.info kernel: device wl0 entered promiscuous mode
Jan  3 14:07:14 OpenWrt user.info kernel: wl0: attempt to add interface with same source address.
Jan  3 14:07:14 OpenWrt user.info kernel: br-lan: port 2(wl0) entering learning state
Jan  3 14:07:14 OpenWrt user.info kernel: br-lan: port 2(wl0) entering forwarding state
Jan  3 14:07:14 OpenWrt user.info kernel: br-lan: topology change detected, propagating
Jan  3 14:07:15 OpenWrt user.info sysinit: Loading defaults
Jan  3 14:07:17 OpenWrt user.info sysinit: Loading synflood protection
Jan  3 14:07:18 OpenWrt user.info sysinit: Adding custom chains
Jan  3 14:07:19 OpenWrt user.info sysinit: Loading zones
Jan  3 14:07:21 OpenWrt user.info sysinit: Loading forwarding
Jan  3 14:07:21 OpenWrt user.info sysinit: Loading redirects
Jan  3 14:07:21 OpenWrt user.info sysinit: Loading rules
Jan  3 14:07:21 OpenWrt user.info sysinit: Loading includes
Jan  3 14:07:21 OpenWrt user.info sysinit: Loading zone defaults
Jan  3 14:07:22 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan
Jan  3 14:07:22 OpenWrt user.notice root: adding wan (eth0.1) to firewall zone wan
Jan  3 20:05:02 OpenWrt user.notice rdate: Synced with cudns.cit.cornell.edu
Jan  3 20:05:02 OpenWrt authpriv.info dropbear[829]: Running in background
Jan  3 20:05:02 OpenWrt user.info sysinit: mkdir: cannot create directory '': No such file or directory
Jan  3 20:05:03 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: started, version 2.55 cachesize 150
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq-dhcp[897]: DHCP, IP range 10.0.0.100 -- 10.0.0.250, lease time 12h
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: using local addresses only for domain lan
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: reading /tmp/resolv.conf.auto
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: using nameserver 192.168.1.1#53
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: using local addresses only for domain lan
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq[897]: read /etc/hosts - 1 addresses
Jan  3 20:05:07 OpenWrt daemon.info dnsmasq-dhcp[897]: read /etc/ethers - 0 addresses
Jan  3 20:05:10 OpenWrt daemon.info dnsmasq-dhcp[897]: DHCPREQUEST(br-lan) 10.0.0.119 00:13:ce:32:e6:51 
Jan  3 20:05:10 OpenWrt daemon.info dnsmasq-dhcp[897]: DHCPACK(br-lan) 10.0.0.119 00:13:ce:32:e6:51 norek
Jan  3 20:05:23 OpenWrt authpriv.info dropbear[931]: Child connection from 10.0.0.119:48181
Jan  3 20:05:40 OpenWrt authpriv.info dropbear[932]: Child connection from 10.0.0.119:48182
Jan  3 20:05:47 OpenWrt authpriv.notice dropbear[932]: password auth succeeded for 'root' from 10.0.0.119:48182

a dmesg:

root@OpenWrt:~# dmesg
CPU revision is: 00029029
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Linux version 2.4.37.9 (norek@norek) (gcc version 3.4.6 (OpenWrt-2.0)) #3 Mon Jan 3 15:18:50 CET 2011
Setting the PFC to its default value
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM5354 rev 3 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 237.56 BogoMIPS
Memory: 30456k/32768k available (1440k kernel code, 2312k reserved, 100k data, 84k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
PCI: Setting latency timer of device 00:01.0 to 64
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:1f:c6:e5:57:4f
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x29f314
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x007f0000 : "linux"
0x0009b800-0x00340000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x00340000-0x007f0000 : "rootfs_data"
sflash: found no supported devices
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k freed
diag: Detected 'ASUS WL-500g Premium V2'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found a 5325! It's a 5350.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SCSI subsystem driver Revision: 1.00
eth0.0: add 01:00:5e:00:00:01 mcast address to master interface
eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
eth0.0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:05.0 to 64
PCI/DMA
wl0: wlc_attach: chiprev 3 coreunit 0 corerev 13 cccap 0x104007ea maccap 0x30482205 band 2.4G, phy_type 5 phy_rev 0 ana_rev 6
wl0: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.5
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Journalled Block Device driver loaded
ip_tables: (C) 2000-2002 Netfilter core team
SB USB20H init
SB COREREV: 2
SB USB20H resetting
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
PCI: Setting latency timer of device 00:03.1 to 64
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:03.1: illegal capability!
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 336 bytes per conntrack
hub.c: new USB device 00:03.1-1, assigned address 2
hub.c: USB hub found
hub.c: 2 ports detected
SB USB20H init
SB COREREV: 2
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
PCI: Setting latency timer of device 00:03.0 to 64
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:03.1-1.1, assigned address 3
fuse init (API version 7.5)
fuse distribution version: 2.5.3
fuse init: DCACHE_BUG enabled
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Kingston  Model: DataTraveler II+  Rev: 1.13
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 502784 512-byte hdwr sectors (257 MB)
sda: Write Protect is off
Partition check:
 /dev/scsi/host0/bus0/target0/lun0: p1 p2
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
device wl0 entered promiscuous mode
wl0: attempt to add interface with same source address.
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating

Troche juz dzialalem z openwrt i nie jestem az takim laikiem w tej dziedzinie a tu zonk mam nadal z tym problem.

37 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Pokaż opkg list_installed i lsmod

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

38 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary napisał/a:

Pokaż opkg list_installed

opkg list-installed

root@OpenWrt:~# opkg list-installed
base-files - 43.10-r24824
blkid - 1.41.11-1
block-extroot - 0.0.1-2
block-hotplug - 0.1.0-2
block-mount - 0.1.0-2
busybox - 1.15.3-2
disktype - 9-1
dnsmasq - 2.55-6
dropbear - 0.52-4
e2fsprogs - 1.41.11-1
fdisk - 2.13.0.1-4
firewall - 1-20
glib1 - 1.2.10-1
hotplug2 - 1.0-beta-2
iptables - 1.4.6-2
iptables-mod-conntrack - 1.4.6-2
iptables-mod-nat - 1.4.6-2
kernel - 2.4.37.9-1
kmod-brcm-wl - 2.4.37.9+4.150.10.5.3-7
kmod-diag - 2.4.37.9-7.1
kmod-fs-ext2 - 2.4.37.9-1
kmod-fs-ext3 - 2.4.37.9-1
kmod-fs-vfat - 2.4.37.9-1
kmod-fuse - 2.4.37.9+2.5.3-1
kmod-ipt-conntrack - 2.4.37.9-1
kmod-ipt-core - 2.4.37.9-1
kmod-ipt-nat - 2.4.37.9-1
kmod-ipt-nathelper - 2.4.37.9-1
kmod-nls-cp1250 - 2.4.37.9-1
kmod-nls-utf8 - 2.4.37.9-1
kmod-ppp - 2.4.37.9-1
kmod-pppoe - 2.4.37.9-1
kmod-scsi-core - 2.4.37.9-1
kmod-switch - 2.4.37.9-3
kmod-usb-core - 2.4.37.9-1
kmod-usb-ohci - 2.4.37.9-1
kmod-usb-storage - 2.4.37.9-1
kmod-usb-uhci - 2.4.37.9-1
kmod-usb2 - 2.4.37.9-1
kmod-wlcompat - 2.4.37.9+4.150.10.5.3-7
libblkid - 1.41.11-1
libc - 0.9.30.1-43.10
libcurl - 7.19.6-1
libevent - 1.4.13-2
libext2fs - 1.41.11-1
libgcc - 3.4.6-43.10
libiptc - 1.4.6-2
liblua - 5.1.4-7
libncurses - 5.7-2
libopenssl - 0.9.8m-3
libpthread - 0.9.30.1-43.10
librt - 0.9.30.1-43.10
libuci - 12012009.6-2
libuci-lua - 12012009.6-2
libuuid - 1.41.11-1
libxtables - 1.4.6-2
lua - 5.1.4-7
luci - 0.9.0-1
luci-admin-core - 0.9.0-1
luci-admin-full - 0.9.0-1
luci-admin-mini - 0.9.0-1
luci-app-firewall - 0.9.0-1
luci-app-initmgr - 0.9.0-1
luci-cbi - 0.9.0-1
luci-core - 0.9.0-1
luci-http - 0.9.0-1
luci-i18n-english - 0.9.0-1
luci-ipkg - 0.9.0-1
luci-lmo - 0.9.0-1
luci-medium - 0.9.0-1
luci-nixio - 0.9.0-1
luci-sgi-cgi - 0.9.0-1
luci-sys - 0.9.0-1
luci-theme-base - 0.9.0-1
luci-theme-openwrt - 0.9.0-1
luci-theme-openwrtlight - 0.9.0-1
luci-uci - 0.9.0-1
luci-uvl - 0.9.0-1
luci-web - 0.9.0-1
mc - 4.6.2-1
mtd - 13
nas - 4.150.10.5.3-7
ntfs-3g - 2010.8.8-1-fuseint
nvram - 7
opkg - 576-1
ppp - 2.4.4-11
ppp-mod-pppoe - 2.4.4-11
transmission-daemon - 1.92-1
transmission-web - 1.92-1
uci - 12012009.6-2
uhttpd - 20
wireless-tools - 29-4
wlc - 4.150.10.5.3-7
zlib - 1.2.3-5

39 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

i jeszcze mount, lsmod oraz disktype (zainstaluj jak nie masz)

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

40 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary napisał/a:

i jeszcze mount, lsmod oraz disktype (zainstaluj jak nie masz)

root@OpenWrt:~# lsmod
Module                  Size  Used by    Tainted: P  
fuse                   29984  0 
usb-storage            70144  0 
wlcompat                9504  0 
usb-ohci               19252  0 
ip_nat_tftp             1768  0 
ip_conntrack_tftp       1628  1 
ip_nat_irc              2296  0 
ip_conntrack_irc        3028  1 
ip_nat_ftp              2920  0 
ip_conntrack_ftp        4172  1 
ipt_MASQUERADE          1316  1 
iptable_nat            20888  4 ip_nat_tftp ip_nat_irc ip_nat_ftp ipt_MASQUERADE
ipt_NOTRACK              616  0 
iptable_raw             1164  1 
ipt_state                424  3 
ip_conntrack           23280  3 ip_nat_tftp ip_conntrack_tftp ip_nat_irc ip_conntrack_irc ip_nat_ftp ip_conntrack_ftp ipt_MASQUERADE iptable_nat ipt_NOTRACK ipt_state
ehci-hcd               20556  0 
sd_mod                 12500  0 
pppoe                   9368  0 
pppox                   1196  1 pppoe
ipt_REJECT              3932  2 
ipt_TCPMSS              2316  2 
ipt_LOG                 3804  0 
ipt_comment              284  0 
ipt_multiport            748  0 
ipt_mac                  556  0 
ipt_limit                892  1 
iptable_mangle          2156  0 
iptable_filter          1676  1 
ip_tables              16960 16 ipt_MASQUERADE iptable_nat ipt_NOTRACK iptable_raw ipt_state ipt_REJECT ipt_TCPMSS ipt_LOG ipt_comment ipt_multiport ipt_mac ipt_limit iptable_mangle iptable_filter
ext2                   40720  0 
ext3                   71436  0 
jbd                    51152  0 ext3
ppp_async               8044  0 
ppp_generic            25772  0 pppoe pppox ppp_async
slhc                    6064  0 ppp_generic
vfat                   11340  0 
fat                    34448  0 vfat
wl                    666560  0 
nls_utf8                 688  0 
nls_cp1250              3680  0 
usbcore                71296  1 usb-storage usb-ohci ehci-hcd
scsi_mod               67152  2 usb-storage sd_mod
switch-robo             5580  0 
switch-core             5104  0 switch-robo
diag                   57968  0 
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw)
/dev/mtdblock/4 on /overlay type jffs2 (rw)
mini_fo:/overlay on / type mini_fo (rw)
none on /proc/bus/usb type usbfs (rw)
root@OpenWrt:~# fdisk -l 

Disk /dev/scsi/host0/bus0/target0/lun0/disc: 257 MB, 257425408 bytes
8 heads, 62 sectors/track, 1013 cylinders
Units = cylinders of 496 * 512 = 253952 bytes
Disk identifier: 0x64b81391

                                 Device Boot      Start         End      Blocks   Id  System
/dev/scsi/host0/bus0/target0/lun0/part1               1         744      184481   83  Linux
/dev/scsi/host0/bus0/target0/lun0/part2             745        1013       66712   82  Linux swap / Solaris
root@OpenWrt:~# disktype /dev/scsi/host0/bus0/target0/lun0/part1

--- /dev/scsi/host0/bus0/target0/lun0/part1
Block device, size 180.2 MiB (188908544 bytes)
Ext3 file system
  Volume name "openwrt overlay "
  UUID 69A1E2A0-0453-4B6A-B48E-B9340B167B20 (DCE, v4)
  Volume size 180.2 MiB (188907520 bytes, 184480 blocks of 1 KiB)

root@OpenWrt:~# disktype /dev/scsi/host0/bus0/target0/lun0/part2

--- /dev/scsi/host0/bus0/target0/lun0/part2
Block device, size 65.15 MiB (68313088 bytes)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
  Swap size 65.14 MiB (68304896 bytes, 16676 pages of 4 KiB)

41 Odpowiedź przez majerotto

  • Zarejestrowany: 2010-05-03
  • Posty: 53

Odp: fstab i extroot

u mnie to samo. sprawdzałem dwa razy
jak zrobię reboot to nie powinno być już rozgłaszania bezprzewodowego a po chwili zapala się dioda AIR i tyle. podczas restartu widzę że pen się świeci (czyli pracuje przez chwilę) ale po 3sec znika dioda sygnalizująca pracę pena i rusza z wewnętrznego flasha.
teraz moje logi:

root@OpenWrt:~# opkg list-installed | grep block
block-extroot - 0.0.1-2
block-hotplug - 0.1.0-2
block-mount - 0.1.0-2

root@OpenWrt:~# uname -a
Linux OpenWrt 2.4.37.9 #3 Fri Nov 19 21:09:13 PST 2010 mips GNU/Linux

root@OpenWrt:~# cat /etc/config/fstab

config 'global' 'automount'
    option 'from_fstab' '1'
    option 'anon_mount' '1'

config 'global' 'autoswap'
    option 'from_fstab' '1'
    option 'anon_swap' '0'

config 'mount'
    option 'uuid' 'e97db5fa-d430-42b2-9a63-7f36f5947dbb'
    option 'fstype' 'ext3'
    option 'options' 'rw,noatime'
    option 'enabled' '1'
    option 'enabled_fsck' '1'
    option 'is_rootfs' '1'
    option 'device' '/dev/scsi/host0/bus0/target0/lun0/part2'

config 'swap'
    option 'device' '/dev/scsi/host0/bus0/target0/lun0/part1'
    option 'enabled' '1'

dodatkowo log:

root@OpenWrt:~# logread
Jan  3 14:26:14 OpenWrt authpriv.warn dropbear[5787]: login attempt for nonexistent user from 200.49.144.98:44174
Jan  3 14:26:15 OpenWrt authpriv.warn dropbear[5787]: login attempt for nonexistent user from 200.49.144.98:44174
Jan  3 14:26:16 OpenWrt authpriv.info dropbear[5788]: Child connection from 200.49.144.98:44251
Jan  3 14:26:16 OpenWrt authpriv.info dropbear[5787]: exit before auth: Disconnect received
Jan  3 14:26:30 OpenWrt authpriv.warn dropbear[5788]: login attempt for nonexistent user from 200.49.144.98:44251
Jan  3 14:26:31 OpenWrt authpriv.warn dropbear[5788]: login attempt for nonexistent user from 200.49.144.98:44251
Jan  3 14:26:32 OpenWrt authpriv.info dropbear[5788]: exit before auth: Disconnect received
Jan  3 14:26:43 OpenWrt authpriv.info dropbear[5789]: Child connection from 200.49.144.98:50298
Jan  3 14:26:52 OpenWrt authpriv.warn dropbear[5789]: login attempt for nonexistent user from 200.49.144.98:50298
Jan  3 14:26:53 OpenWrt authpriv.warn dropbear[5789]: login attempt for nonexistent user from 200.49.144.98:50298
Jan  3 14:26:54 OpenWrt authpriv.info dropbear[5803]: Child connection from 200.49.144.98:50540
Jan  3 14:26:54 OpenWrt authpriv.info dropbear[5789]: exit before auth: Disconnect received
Jan  3 14:27:01 OpenWrt authpriv.warn dropbear[5803]: login attempt for nonexistent user from 200.49.144.98:50540
Jan  3 14:27:03 OpenWrt authpriv.warn dropbear[5803]: login attempt for nonexistent user from 200.49.144.98:50540
Jan  3 14:27:05 OpenWrt authpriv.info dropbear[5803]: exit before auth: Disconnect received
Jan  3 14:27:06 OpenWrt authpriv.info dropbear[5804]: Child connection from 200.49.144.98:50815
Jan  3 14:27:11 OpenWrt authpriv.warn dropbear[5804]: login attempt for nonexistent user from 200.49.144.98:50815
Jan  3 14:27:12 OpenWrt authpriv.warn dropbear[5804]: login attempt for nonexistent user from 200.49.144.98:50815
Jan  3 14:27:12 OpenWrt authpriv.info dropbear[5805]: Child connection from 200.49.144.98:50974
Jan  3 14:27:13 OpenWrt authpriv.info dropbear[5804]: exit before auth: Disconnect received
Jan  3 14:27:17 OpenWrt authpriv.warn dropbear[5805]: login attempt for nonexistent user from 200.49.144.98:50974
Jan  3 14:27:18 OpenWrt authpriv.warn dropbear[5805]: login attempt for nonexistent user from 200.49.144.98:50974
Jan  3 14:27:18 OpenWrt authpriv.info dropbear[5806]: Child connection from 200.49.144.98:51168
Jan  3 14:27:19 OpenWrt authpriv.info dropbear[5805]: exit before auth: Disconnect received
Jan  3 14:27:23 OpenWrt authpriv.warn dropbear[5806]: login attempt for nonexistent user from 200.49.144.98:51168
Jan  3 14:27:25 OpenWrt authpriv.warn dropbear[5806]: login attempt for nonexistent user from 200.49.144.98:51168
Jan  3 14:27:25 OpenWrt authpriv.info dropbear[5807]: Child connection from 200.49.144.98:51354
Jan  3 14:27:25 OpenWrt authpriv.info dropbear[5806]: exit before auth: Disconnect received
Jan  3 14:27:29 OpenWrt authpriv.warn dropbear[5807]: login attempt for nonexistent user from 200.49.144.98:51354
Jan  3 14:27:30 OpenWrt authpriv.warn dropbear[5807]: login attempt for nonexistent user from 200.49.144.98:51354
Jan  3 14:27:31 OpenWrt authpriv.info dropbear[5807]: exit before auth: Disconnect received
Jan  3 14:27:34 OpenWrt authpriv.info dropbear[5808]: Child connection from 200.49.144.98:51504
Jan  3 14:27:40 OpenWrt authpriv.warn dropbear[5808]: login attempt for nonexistent user from 200.49.144.98:51504
Jan  3 14:27:41 OpenWrt authpriv.warn dropbear[5808]: login attempt for nonexistent user from 200.49.144.98:51504
Jan  3 14:27:42 OpenWrt authpriv.info dropbear[5809]: Child connection from 200.49.144.98:51757
Jan  3 14:27:42 OpenWrt authpriv.info dropbear[5808]: exit before auth: Disconnect received
Jan  3 14:27:46 OpenWrt authpriv.warn dropbear[5809]: login attempt for nonexistent user from 200.49.144.98:51757
Jan  3 14:27:47 OpenWrt authpriv.warn dropbear[5809]: login attempt for nonexistent user from 200.49.144.98:51757
Jan  3 14:27:47 OpenWrt authpriv.info dropbear[5810]: Child connection from 200.49.144.98:51950
Jan  3 14:27:47 OpenWrt authpriv.info dropbear[5809]: exit before auth: Disconnect received
Jan  3 14:27:51 OpenWrt authpriv.warn dropbear[5810]: login attempt for nonexistent user from 200.49.144.98:51950
Jan  3 14:27:52 OpenWrt authpriv.warn dropbear[5810]: login attempt for nonexistent user from 200.49.144.98:51950
Jan  3 14:27:53 OpenWrt authpriv.info dropbear[5811]: Child connection from 200.49.144.98:52132
Jan  3 14:27:53 OpenWrt authpriv.info dropbear[5810]: exit before auth: Disconnect received
Jan  3 14:27:57 OpenWrt authpriv.warn dropbear[5811]: login attempt for nonexistent user from 200.49.144.98:52132
Jan  3 14:27:58 OpenWrt authpriv.warn dropbear[5811]: login attempt for nonexistent user from 200.49.144.98:52132
Jan  3 14:27:58 OpenWrt authpriv.info dropbear[5812]: Child connection from 200.49.144.98:52337
Jan  3 14:27:59 OpenWrt authpriv.info dropbear[5811]: exit before auth: Disconnect received
Jan  3 14:28:02 OpenWrt authpriv.warn dropbear[5812]: login attempt for nonexistent user from 200.49.144.98:52337
Jan  3 14:28:03 OpenWrt authpriv.warn dropbear[5812]: login attempt for nonexistent user from 200.49.144.98:52337
Jan  3 14:28:03 OpenWrt authpriv.info dropbear[5813]: Child connection from 200.49.144.98:52528
Jan  3 14:28:04 OpenWrt authpriv.info dropbear[5812]: exit before auth: Disconnect received
Jan  3 14:28:08 OpenWrt authpriv.warn dropbear[5813]: login attempt for nonexistent user from 200.49.144.98:52528
Jan  3 14:28:09 OpenWrt authpriv.warn dropbear[5813]: login attempt for nonexistent user from 200.49.144.98:52528
Jan  3 14:28:10 OpenWrt authpriv.info dropbear[5814]: Child connection from 200.49.144.98:52652
Jan  3 14:28:10 OpenWrt authpriv.info dropbear[5813]: exit before auth: Disconnect received
Jan  3 14:28:14 OpenWrt authpriv.warn dropbear[5814]: login attempt for nonexistent user from 200.49.144.98:52652
Jan  3 14:28:15 OpenWrt authpriv.warn dropbear[5814]: login attempt for nonexistent user from 200.49.144.98:52652
Jan  3 14:28:17 OpenWrt authpriv.info dropbear[5814]: exit before auth: Disconnect received
Jan  3 14:28:17 OpenWrt authpriv.info dropbear[5815]: Child connection from 200.49.144.98:52862
Jan  3 14:28:21 OpenWrt authpriv.warn dropbear[5815]: login attempt for nonexistent user from 200.49.144.98:52862
Jan  3 14:28:22 OpenWrt authpriv.warn dropbear[5815]: login attempt for nonexistent user from 200.49.144.98:52862
Jan  3 14:28:22 OpenWrt authpriv.info dropbear[5816]: Child connection from 200.49.144.98:53042
Jan  3 14:28:23 OpenWrt authpriv.info dropbear[5815]: exit before auth: Disconnect received
Jan  3 14:28:28 OpenWrt authpriv.warn dropbear[5816]: login attempt for nonexistent user from 200.49.144.98:53042
Jan  3 14:28:29 OpenWrt authpriv.warn dropbear[5816]: login attempt for nonexistent user from 200.49.144.98:53042
Jan  3 14:28:29 OpenWrt authpriv.info dropbear[5817]: Child connection from 200.49.144.98:53281
Jan  3 14:28:30 OpenWrt authpriv.info dropbear[5816]: exit before auth: Disconnect received
Jan  3 14:28:36 OpenWrt authpriv.warn dropbear[5817]: login attempt for nonexistent user from 200.49.144.98:53281
Jan  3 14:28:37 OpenWrt authpriv.warn dropbear[5817]: login attempt for nonexistent user from 200.49.144.98:53281
Jan  3 14:28:38 OpenWrt authpriv.info dropbear[5818]: Child connection from 200.49.144.98:53555
Jan  3 14:28:38 OpenWrt authpriv.info dropbear[5817]: exit before auth: Disconnect received
Jan  3 14:28:41 OpenWrt authpriv.warn dropbear[5818]: login attempt for nonexistent user from 200.49.144.98:53555
Jan  3 14:28:43 OpenWrt authpriv.warn dropbear[5818]: login attempt for nonexistent user from 200.49.144.98:53555
Jan  3 14:28:43 OpenWrt authpriv.info dropbear[5819]: Child connection from 200.49.144.98:53726
Jan  3 14:28:43 OpenWrt authpriv.info dropbear[5818]: exit before auth: Disconnect received
Jan  3 14:28:46 OpenWrt authpriv.warn dropbear[5819]: login attempt for nonexistent user from 200.49.144.98:53726
Jan  3 14:28:48 OpenWrt authpriv.warn dropbear[5819]: login attempt for nonexistent user from 200.49.144.98:53726
Jan  3 14:28:48 OpenWrt authpriv.info dropbear[5819]: exit before auth: Disconnect received
Jan  3 15:13:34 OpenWrt authpriv.info dropbear[5872]: Child connection from 83.13.14.82:3393
Jan  3 15:13:48 OpenWrt authpriv.notice dropbear[5872]: password auth succeeded for 'root' from 83.13.14.82:3393
Jan  3 15:17:24 OpenWrt authpriv.info dropbear[5872]: exit after auth (root): Exited normally
Jan  3 15:54:57 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPREQUEST(br-lan) 192.168.1.204 00:26:ab:0c:81:e3 
Jan  3 15:54:57 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPACK(br-lan) 192.168.1.204 00:26:ab:0c:81:e3 
Jan  3 15:57:18 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPREQUEST(br-lan) 192.168.1.100 00:24:2c:6f:8d:71 
Jan  3 15:57:18 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPACK(br-lan) 192.168.1.100 00:24:2c:6f:8d:71 mjr-netbook
Jan  3 17:10:21 OpenWrt authpriv.info dropbear[6037]: Child connection from 83.13.14.82:1083
Jan  3 17:10:34 OpenWrt authpriv.notice dropbear[6037]: password auth succeeded for 'root' from 83.13.14.82:1083
Jan  3 17:13:55 OpenWrt authpriv.info dropbear[6037]: exit after auth (root): Exited normally
Jan  3 17:32:54 OpenWrt authpriv.info dropbear[6072]: Child connection from 74.52.29.60:43922
Jan  3 17:32:59 OpenWrt authpriv.warn dropbear[6072]: bad password attempt for 'root' from 74.52.29.60:43922
Jan  3 17:33:01 OpenWrt authpriv.info dropbear[6072]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:01 OpenWrt authpriv.info dropbear[6073]: Child connection from 74.52.29.60:44634
Jan  3 17:33:05 OpenWrt authpriv.warn dropbear[6073]: bad password attempt for 'root' from 74.52.29.60:44634
Jan  3 17:33:06 OpenWrt authpriv.info dropbear[6073]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:07 OpenWrt authpriv.info dropbear[6074]: Child connection from 74.52.29.60:45257
Jan  3 17:33:13 OpenWrt authpriv.warn dropbear[6074]: bad password attempt for 'root' from 74.52.29.60:45257
Jan  3 17:33:15 OpenWrt authpriv.info dropbear[6074]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:15 OpenWrt authpriv.info dropbear[6075]: Child connection from 74.52.29.60:46146
Jan  3 17:33:20 OpenWrt authpriv.warn dropbear[6075]: bad password attempt for 'root' from 74.52.29.60:46146
Jan  3 17:33:21 OpenWrt authpriv.info dropbear[6075]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:21 OpenWrt authpriv.info dropbear[6076]: Child connection from 74.52.29.60:46749
Jan  3 17:33:27 OpenWrt authpriv.warn dropbear[6076]: bad password attempt for 'root' from 74.52.29.60:46749
Jan  3 17:33:28 OpenWrt authpriv.info dropbear[6076]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:28 OpenWrt authpriv.info dropbear[6077]: Child connection from 74.52.29.60:47680
Jan  3 17:33:33 OpenWrt authpriv.warn dropbear[6077]: bad password attempt for 'root' from 74.52.29.60:47680
Jan  3 17:33:35 OpenWrt authpriv.info dropbear[6077]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:35 OpenWrt authpriv.info dropbear[6078]: Child connection from 74.52.29.60:48399
Jan  3 17:33:41 OpenWrt authpriv.warn dropbear[6078]: bad password attempt for 'root' from 74.52.29.60:48399
Jan  3 17:33:42 OpenWrt authpriv.info dropbear[6078]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:43 OpenWrt authpriv.info dropbear[6079]: Child connection from 74.52.29.60:49153
Jan  3 17:33:47 OpenWrt authpriv.warn dropbear[6079]: bad password attempt for 'root' from 74.52.29.60:49153
Jan  3 17:33:49 OpenWrt authpriv.info dropbear[6079]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:49 OpenWrt authpriv.info dropbear[6080]: Child connection from 74.52.29.60:49749
Jan  3 17:33:54 OpenWrt authpriv.warn dropbear[6080]: bad password attempt for 'root' from 74.52.29.60:49749
Jan  3 17:33:56 OpenWrt authpriv.info dropbear[6080]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:33:56 OpenWrt authpriv.info dropbear[6081]: Child connection from 74.52.29.60:50556
Jan  3 17:34:02 OpenWrt authpriv.warn dropbear[6081]: bad password attempt for 'root' from 74.52.29.60:50556
Jan  3 17:34:03 OpenWrt authpriv.info dropbear[6081]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:03 OpenWrt authpriv.info dropbear[6082]: Child connection from 74.52.29.60:51331
Jan  3 17:34:08 OpenWrt authpriv.warn dropbear[6082]: bad password attempt for 'root' from 74.52.29.60:51331
Jan  3 17:34:09 OpenWrt authpriv.info dropbear[6082]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:09 OpenWrt authpriv.info dropbear[6083]: Child connection from 74.52.29.60:52066
Jan  3 17:34:16 OpenWrt authpriv.warn dropbear[6083]: bad password attempt for 'root' from 74.52.29.60:52066
Jan  3 17:34:18 OpenWrt authpriv.info dropbear[6083]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:18 OpenWrt authpriv.info dropbear[6084]: Child connection from 74.52.29.60:53145
Jan  3 17:34:24 OpenWrt authpriv.warn dropbear[6084]: bad password attempt for 'root' from 74.52.29.60:53145
Jan  3 17:34:26 OpenWrt authpriv.info dropbear[6084]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:26 OpenWrt authpriv.info dropbear[6085]: Child connection from 74.52.29.60:54093
Jan  3 17:34:32 OpenWrt authpriv.warn dropbear[6085]: bad password attempt for 'root' from 74.52.29.60:54093
Jan  3 17:34:34 OpenWrt authpriv.info dropbear[6085]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:34 OpenWrt authpriv.info dropbear[6086]: Child connection from 74.52.29.60:54905
Jan  3 17:34:37 OpenWrt authpriv.warn dropbear[6086]: bad password attempt for 'root' from 74.52.29.60:54905
Jan  3 17:34:38 OpenWrt authpriv.info dropbear[6086]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:38 OpenWrt authpriv.info dropbear[6087]: Child connection from 74.52.29.60:55386
Jan  3 17:34:42 OpenWrt authpriv.warn dropbear[6087]: bad password attempt for 'root' from 74.52.29.60:55386
Jan  3 17:34:43 OpenWrt authpriv.info dropbear[6087]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:44 OpenWrt authpriv.info dropbear[6088]: Child connection from 74.52.29.60:51992
Jan  3 17:34:49 OpenWrt authpriv.warn dropbear[6088]: bad password attempt for 'root' from 74.52.29.60:51992
Jan  3 17:34:50 OpenWrt authpriv.info dropbear[6088]: exit before auth (user 'root', 1 fails): Disconnect received
Jan  3 17:34:51 OpenWrt authpriv.info dropbear[6089]: Child connection from 74.52.29.60:52698
Jan  3 17:34:56 OpenWrt authpriv.warn dropbear[6089]: login attempt for nonexistent user from 74.52.29.60:52698
Jan  3 17:34:57 OpenWrt authpriv.info dropbear[6089]: exit before auth: Disconnect received
Jan  3 20:24:08 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPDISCOVER(br-lan) a8:e3:ee:6b:ef:db 
Jan  3 20:24:08 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPOFFER(br-lan) 192.168.1.187 a8:e3:ee:6b:ef:db 
Jan  3 20:24:08 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPDISCOVER(br-lan) a8:e3:ee:6b:ef:db 
Jan  3 20:24:08 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPOFFER(br-lan) 192.168.1.187 a8:e3:ee:6b:ef:db 
Jan  3 20:24:08 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPREQUEST(br-lan) 192.168.1.187 a8:e3:ee:6b:ef:db 
Jan  3 20:24:08 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPACK(br-lan) 192.168.1.187 a8:e3:ee:6b:ef:db 
Jan  3 20:28:10 OpenWrt authpriv.info dropbear[6324]: Child connection from 192.168.1.100:59670
Jan  3 20:28:15 OpenWrt authpriv.notice dropbear[6324]: password auth succeeded for 'root' from 192.168.1.100:59670
Jan  3 20:28:35 OpenWrt user.notice fstab: e2fsck (/dev/scsi/host0/bus0/target0/lun0/part2): /dev/scsi/host0/bus0/target0/lun0/part2: clean, 1582/948416 files, 106080/3787520 blocks
Jan  3 20:57:24 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPREQUEST(br-lan) 192.168.1.100 00:24:2c:6f:8d:71 
Jan  3 20:57:24 OpenWrt daemon.info dnsmasq-dhcp[1111]: DHCPACK(br-lan) 192.168.1.100 00:24:2c:6f:8d:71 mjr-netbook
root@OpenWrt:~# disktype /dev/scsi/host0/bus0/target0/lun0/part2

--- /dev/scsi/host0/bus0/target0/lun0/part2
Block device, size 14.45 GiB (15513681920 bytes)
Ext3 file system
  UUID E97DB5FA-D430-42B2-9A63-7F36F5947DBB (DCE, v4)
  Volume size 14.45 GiB (15513681920 bytes, 3787520 blocks of 4 KiB)
root@OpenWrt:~# lsmod
Module                  Size  Used by    Tainted: P  
usb-storage            70144  1 
wlcompat                9504  0 
ip_nat_tftp             1768  0 
ip_conntrack_tftp       1628  1 
ip_nat_irc              2296  0 
ip_conntrack_irc        3028  1 
ip_nat_ftp              2920  0 
ip_conntrack_ftp        4172  1 
ipt_MASQUERADE          1316  1 
iptable_nat            20888  4 ip_nat_tftp ip_nat_irc ip_nat_ftp ipt_MASQUERADE
ipt_NOTRACK              616  0 
iptable_raw             1164  1 
ipt_state                424  3 
ip_conntrack           23376  3 ip_nat_tftp ip_conntrack_tftp ip_nat_irc ip_conntrack_irc ip_nat_ftp ip_conntrack_ftp ipt_MASQUERADE iptable_nat ipt_NOTRACK ipt_state
ehci-hcd               20556  0 
sd_mod                 12500  2 
pppoe                   9368  0 
pppox                   1196  1 pppoe
ipt_REJECT              3932  2 
ipt_TCPMSS              2316  2 
ipt_LOG                 3804  0 
ipt_comment              284  0 
ipt_multiport            748  0 
ipt_mac                  556  0 
ipt_limit                892  1 
iptable_mangle          2156  0 
iptable_filter          1676  1 
ip_tables              16960 16 ipt_MASQUERADE iptable_nat ipt_NOTRACK iptable_raw ipt_state ipt_REJECT ipt_TCPMSS ipt_LOG ipt_comment ipt_multiport ipt_mac ipt_limit iptable_mangle iptable_filter
ext2                   40720  0 
ext3                   71436  0 
jbd                    51152  0 ext3
ppp_async               8044  0 
ppp_generic            25772  0 pppoe pppox ppp_async
slhc                    6064  0 ppp_generic
vfat                   11340  0 
fat                    34448  0 vfat
wl                    666560  0 
nls_iso8859-1           2672  0 
nls_cp437               4192  0 
usbcore                71296  1 usb-storage ehci-hcd
scsi_mod               67152  2 usb-storage sd_mod
switch-robo             5580  0 
switch-core             5104  0 switch-robo
diag                   57968  0 
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw)
/dev/mtdblock/4 on /overlay type jffs2 (rw)
mini_fo:/overlay on / type mini_fo (rw)
none on /proc/bus/usb type usbfs (rw)

42 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Wygląda sensownie. Co masz w /lib/preinit/00_extroot.conf?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

43 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

zapobiegawczo dalem 80 bo koncza mi sie pomysly co dalej moze byc nie tak

root@OpenWrt:~# cat /lib/preinit/00_extroot.conf 
extroot_settle_time="80"

44 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

I router uruchamia się te 80+ sekund?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

45 Odpowiedź przez majerotto

  • Zarejestrowany: 2010-05-03
  • Posty: 53

Odp: fstab i extroot

Cezary napisał/a:

Wygląda sensownie. Co masz w /lib/preinit/00_extroot.conf?

root@OpenWrt:~# cat /lib/preinit/00_extroot.conf
extroot_settle_time="20"

46 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary napisał/a:

I router uruchamia się te 80+ sekund?

tak

wszystko wyglada prosto no ale czemus nie dziala.Uparlem sie nie wiem jak ale odpale extroota wink nawet jak bede siedzial nad tym tydzien ;p

47 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Powiem tak: zmusiliście mnie do wyciągnięcia asusa z pudła. U mnie działa.

root@OpenWrt:/# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /overlay type ext2 (rw,noatime)
mini_fo:/overlay on / type mini_fo (rw)
none on /proc/bus/usb type usbfs (rw)
root@OpenWrt:/# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 1.7M      1.7M         0 100% /rom
tmpfs                     7.0M     44.0K      6.9M   1% /tmp
/dev/scsi/host0/bus0/target0/lun0/part1
                          3.8G      7.7M      3.8G   0% /overlay
mini_fo:/overlay          1.7M      1.7M         0 100% /
root@OpenWrt:/#

Jutro przygotuję gotowca jak chcecie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

48 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary napisał/a:

Powiem tak: zmusiliście mnie do wyciągnięcia asusa z pudła. U mnie działa.

root@OpenWrt:/# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /overlay type ext2 (rw,noatime)
mini_fo:/overlay on / type mini_fo (rw)
none on /proc/bus/usb type usbfs (rw)
root@OpenWrt:/# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 1.7M      1.7M         0 100% /rom
tmpfs                     7.0M     44.0K      6.9M   1% /tmp
/dev/scsi/host0/bus0/target0/lun0/part1
                          3.8G      7.7M      3.8G   0% /overlay
mini_fo:/overlay          1.7M      1.7M         0 100% /
root@OpenWrt:/#

Jutro przygotuję gotowca jak chcecie.

wow, niezle ja nadzisiaj sie poddaje,
jeszcze raz dla pewnosci zrobilem wszystko dokladnie z tym tutorialem http://sateliti.info/showthread.php?182 … p;p=126426   i nadal kicha
jedynie instalowalem kernel 2.4 bo moja wersja asusa to gpV2  - kernel 2.6 cos zle obsluguje wifi dla v2
mam nadzieje ze to nie wina kernela.

Na chwile obecna mam jeszcze tylko dwa pomysly:
1) sprobowac z kernelem 2.6
2) zrobic openwrt z trunka
ale watpie zeby to pomoglo...

Bylibysmy bardzo wdzieczni za gotowca, cos musi byc nie tak...
Z gory dzieki

49 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,968

Odp: fstab i extroot

Sprawdź ten obraz: http://ecco.selfip.net/broadcom/brcm-2.4-extroot/

To kernel 2.4, dołączone sterowniki USB, obsługa block-extroot oraz ext2/ext3. Nic więcej.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

50 Odpowiedź przez norcio

  • norcio
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2011-01-02
  • Posty: 34

Odp: fstab i extroot

Cezary, dziala ten obraz!, 5 min i zero problemow wszystko tak jak powinno byc. Jak go budowales z trunka czy stabilnej backfire? Czy moglbys wrzucic .config to w make menuconfig bym sobie dodal luci web. Zauwazylem roznice w wersji pakietow w twojej wersji maja te same numery ale koncowka cj.