FAQ o OpenWrt | Sprzedam różne routery | Oddam

arek1194 · 2015-07-06 18:42:18

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Temat: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Witam ,od kilku dni morduje się (jestem laikiem w tych sprawach) z moim tp TLMR-3220v1 wgrałem mu Chaos Calmer zrobiłem Extroot doinstalowałem Luci i przeróżne pakiety

np ten sposób pokazuje na końcu error? w/g tego poradnika :http://eko.one.pl/?p=openwrt-3g

BusyBox v1.23.2 (2015-06-15 21:29:03 CEST) built-in shell (ash)

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M

----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer (r46163) |
| Build time: 2015-07-04 07:00 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1 |
| Uptime: 0d, 00:01:03 |
| Load: 0.80 0.24 0.08 |
| Flash: total: 1.8GB, free: 1.7GB, used: 0% |
| Memory: total: 27.9MB, free: 14.4MB, used: 48% |
| WAN: |
| LAN: 192.168.1.1 |
| radio0: mode: sta, ssid: MAJU_Network_3, channel: 11, conn: 1 |
----------------------------------------------------------------
root@OpenWrt:~# Collected errors:
-ash: Collected: not found
root@OpenWrt:~# * pkg_run_script: package "comgt-ncm" postinst script returned
status 2.
-ash: *: not found
root@OpenWrt:~# * opkg_configure: comgt-ncm.postinst returned 2.
-ash: *: not found
root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/chaos_calm … ackages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading http://downloads.openwrt.org/chaos_calm … ckages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … ackages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_luci.
Downloading http://downloads.openwrt.org/chaos_calm … ckages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … ackages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading http://downloads.openwrt.org/chaos_calm … ckages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … ackages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading http://downloads.openwrt.org/chaos_calm … ckages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … ackages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
Downloading http://downloads.openwrt.org/chaos_calm … ckages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … ackages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_telephony.
Downloading http://downloads.openwrt.org/chaos_calm … ckages.sig.
Signature check passed.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ackages.gz.
Updated list of available packages in /var/opkg-lists/eko1.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ckages.sig.
Signature check passed.
root@OpenWrt:~# opkg install wwan comgt chat comgt-ncm comgt-directip uqmi umbim
usb-modeswitch
Package wwan (2014-07-17-1) installed in root is up to date.
Package comgt (0.32-25) installed in root is up to date.
Package chat (2.4.7-6) installed in root is up to date.
Installing comgt-ncm (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing comgt-directip (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Installing kmod-usb-serial (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing kmod-usb-serial-sierrawireless (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing kmod-usb-net (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing kmod-usb-net-sierrawireless (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing uqmi (2014-12-03-86bcdb8cca652676a78b2df8b5e3fb27a40c60a4) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest.
Installing kmod-usb-net-qmi-wwan (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing kmod-usb-wdm (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing umbim (2015-04-09-af9c293c1f1d8a97fbd8adf9c6070ead4920ca84) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Installing kmod-usb-net-cdc-mbim (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing kmod-usb-net-cdc-ncm (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing usb-modeswitch (2014-08-26-993a9a542791953c4804f7ddbb3a07756738e37a) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing libusb-1.0 (1.0.19-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing libpthread (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Installing librt (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk.
Configuring kmod-usb-serial.
usbserial is already loaded
Configuring kmod-usb-serial-sierrawireless.
sierra is already loaded
Configuring kmod-usb-net.
usbnet is already loaded
Configuring kmod-usb-net-sierrawireless.
sierra_net is already loaded
Configuring comgt-directip.
Configuring libpthread.
Configuring kmod-usb-wdm.
Configuring kmod-usb-net-qmi-wwan.
Configuring kmod-usb-net-cdc-ncm.
Configuring kmod-usb-net-cdc-mbim.
Configuring librt.
Configuring libusb-1.0.
Configuring usb-modeswitch.
Configuring uqmi.
Configuring comgt-ncm.
Configuring umbim.
root@OpenWrt:~# uci del network.wan
root@OpenWrt:~# uci set network.wan=interface
root@OpenWrt:~# uci set network.wan.proto=wwan
root@OpenWrt:~# uci set network.wan.pincode=1234
root@OpenWrt:~# uci set network.wan.apn=internet
root@OpenWrt:~# uci commit network
uci: I/O error
root@OpenWrt:~# reboot

do tej chwili nie mogę ustawić aby modem Huawei połączył się z siecią tu wkleje (mam nadzieje że to wyjaśni jakoś moją konfiguracje) :
login as: root
root@192.168.1.1's password:

BusyBox v1.23.2 (2015-06-15 21:29:03 CEST) built-in shell (ash)

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M

----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer (r46163) |
| Build time: 2015-07-04 07:00 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1 |
| Uptime: 0d, 00:04:15 |
| Load: 2.07 1.19 0.50 |
| Flash: total: 1.8GB, free: 1.7GB, used: 1% |
| Memory: total: 27.9MB, free: 14.3MB, used: 48% |
| WAN: |
| LAN: 192.168.1.1 |
| radio0: mode: sta, ssid: MAJU_Network_3, channel: 11, conn: 1 |
----------------------------------------------------------------
root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd3d:9467:7ce5::/48'
network.lan=interface
network.lan.ifname='eth0'
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.wan6=interface
network.wan6._orig_ifname='eth1'
network.wan6._orig_bridge='false'
network.wan6.proto='3g'
network.wan6.device='/dev/ttyS0'
network.wan6.service='umts'
network.wan6.apn='internet'
network.wan6.dialnumber='*99#'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0 1 2 3 4'
network.wan=interface
network.wan.proto='dhcp'
network.huawei=interface
network.huawei._orig_ifname='wlan0'
network.huawei._orig_bridge='false'
network.huawei.proto='3g'
network.huawei.device='/dev/ttyUSB0'
network.huawei.service='umts'
network.huawei.apn='internet'
network.huawei.dialnumber='*99***1#'
network.wwan=interface
network.wwan._orig_ifname='wlan0'
network.wwan._orig_bridge='false'
network.wwan.proto='ppp'
network.wwan.device='/dev/ttyS0'
network.wwanmaju=interface
network.wwanmaju.proto='dhcp'
root@OpenWrt:~#

port /dev/ttyUSB0' ustawilem ręcznie bo w tym rozwijanym pasku było : /dev/ttyS0

Pomożecie? docelowo chciałbym aby router działał jako AP -client a w razie przerwy (jakiś błąd u dostawcy ) aby zadziałał modem 3G - ale to tylko takie marzenia odległe -
na tą chwilę chciałbym to chociaż ręcznie przełączać .. jako AP-klient działa bez problemu.
Dzięki z góry.

Cezary · 2015-07-06 18:44:40

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

i/o error - masz błędy w systemie plików. Rozmontuj tego extroota i sprawdź nośnik przez fsck.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary · 2015-07-06 18:46:22

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

network.huawei.dialnumber zlikwiduj, usuń też sekcję wwan - nie wiem po co to zrobiłes. sekcję huawei dodaj do zony wan w firewallu, chyba że zrobiłeś nową.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-06 19:08:59

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

tzn robiłem nowe (kombinowałem ;-)
jak mam sprawdzić te pliki przez fcsk? szukam w google ale znowu mętlik się robi...
rozumiem że mam sformatować jeszcze raz ,kartę (2gb w modemie) i całość próbować po raz kolejny?

mar_w · 2015-07-06 19:23:56

mar_w
Użytkownik
Nieaktywny

Zarejestrowany: 2014-08-16
Posty: 2,124

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Jak masz E173s-2 (np z Plusa) to ten modem głupieje przy przełączeniu go na stałe w tryb modemu (miałem olbrzymie kłopoty z extroot na karcie sd w modemie - zakończone niepowodzeniem).
Natomiast na E173u-2 (np z PLAY) wszystko chodzi bardzo dobrze. Piszę to bo nie napisałeś jaką wersję posiadasz tego modemu...

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

arek1194 · 2015-07-06 19:25:59

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

E173-s1 z bluconnect

sugerowałem się wcześniej tym poradnikiem :
Większość nowych modemów USB posiada złącze karty mikro SD, dzięki czemu można na nim zrobić też extroota. Możliwe jest więc użycie modemu jednocześnie jako źródła internetu i miejsca przechowywania danych.
Aby było to możliwe, karta SD musi być widoczna w modemie od razu, jeszcze przed przełączeniem urządzenia. Taki warunek spełnia większość urządzeń np. Huawei. Aby się o tym przekonać należy podłączyć modem, a następnie wydając polecenie logread należy sprawdzić istnienie np. takich zapisów:

Jan 1 01:02:33 OpenWrt user.notice kernel: scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Jan 1 01:02:33 OpenWrt user.notice kernel: scsi 4:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2

Widoczny jest wirtualny CDROM (zawierający sterowniki dla Windows) oraz kartę SD. Jeżeli tak jest - taki modem może służyć jako

-- znalazłem taką linijkę u mnie - na tym modemie

Cezary · 2015-07-06 19:37:53

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Musisz go przełączyć, szukaj polecenia at^u2diag. Już dawno modemy to wymagają.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

mar_w · 2015-07-06 19:47:02

mar_w
Użytkownik
Nieaktywny

Zarejestrowany: 2014-08-16
Posty: 2,124

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Ja też się tym sugerowałem. Modem przyjął komendę

at^u2diag
OK

I co z tego jak fiksował. Kupiłem ich kiedyś kilka sztuk i nieźle się naciąłem. Kilka leży na dnie szuflady. Natomiast z E173u-2 nie miałem najmniejszych problemów robiąc wszystko wg poradnika.

PS. Na E173u-2 mogę nawet odpalić Linux MINT 17.1 LIVE CD na stacjonarnym kompie z karty sd z modemu i jeszcze mam internet co na modemie E173s-2 było niewykonalne...
Nie wiem jak jest z E173s-1, być może dobrze....

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

Cezary · 2015-07-06 19:47:53

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Ale to nie jest pełne polecenie, jeszcze argument masz mieć.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-06 22:13:51

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

padam z sił - to chyba ten modem do roota się nie nadaję ,choć dziwi mnie że ten error zawsze wyskakuje w tym samym miejscu .. a wszystko inne się ładnie instaluje i chodzi
:-(
----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer (r46163) |
| Build time: 2015-07-04 07:00 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1 |
| Uptime: 0d, 00:01:01 |
| Load: 0.49 0.15 0.05 |
| Flash: total: 1.8GB, free: 1.7GB, used: 0% |
| Memory: total: 27.9MB, free: 16.2MB, used: 41% |
| WAN: 192.168.43.181, proto: dhcp |
| LAN: 192.168.1.1 |
| radio0: mode: sta, ssid: moja_siec, channel: 11, conn: 1 |
----------------------------------------------------------------
root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/base/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/luci/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_luci.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/luci/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/management/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/packages/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/routing/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/telephony/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_telephony.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/telephony/Packages.sig.
Signature check passed.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ackages.gz.
Updated list of available packages in /var/opkg-lists/eko1.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ckages.sig.
Signature check passed.
root@OpenWrt:~# opkg install wwan comgt chat comgt-ncm comgt-directip uqmi umbim
usb-modeswitch
Installing wwan (2014-07-17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 4-07-17-1_ ar71xx.ipk.
Installing comgt (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 32-25_ar71 xx.ipk.
Installing chat (2.4.7-6) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … .7-6_ar71x x.ipk.
Package chat (2.4.7-6) installed in root is up to date.
Installing comgt-ncm (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … m_0.32-25_ ar71xx.ipk.
Installing comgt-directip (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … rectip_0.3 2-25_ar71xx.ipk.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Installing kmod-usb-serial (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … b-serial_3. 18.17-1_ar71xx.ipk.
Installing kmod-usb-serial-sierrawireless (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -serial-si errawireless_3.18.17-1_ar71xx.ipk.
Installing kmod-usb-net (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … b-net_3.18. 17-1_ar71xx.ipk.
Installing kmod-mii (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … _3.18.17-1 _ar71xx.ipk.
Installing kmod-usb-net-sierrawireless (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-sierr awireless_3.18.17-1_ar71xx.ipk.
Installing uqmi (2014-12-03-86bcdb8cca652676a78b2df8b5e3fb27a40c60a4) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 4-12-03-86 bcdb8cca652676a78b2df8b5e3fb27a40c60a4_ar71xx.ipk.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Installing kmod-usb-net-qmi-wwan (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-qmi-w wan_3.18.17-1_ar71xx.ipk.
Installing kmod-usb-wdm (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … b-wdm_3.18. 17-1_ar71xx.ipk.
Installing umbim (2015-04-09-af9c293c1f1d8a97fbd8adf9c6070ead4920ca84) to root.. .
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 15-04-09-a f9c293c1f1d8a97fbd8adf9c6070ead4920ca84_ar71xx.ipk.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Installing kmod-usb-net-cdc-mbim (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-cdc-m bim_3.18.17-1_ar71xx.ipk.
Installing kmod-usb-net-cdc-ncm (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-cdc-n cm_3.18.17-1_ar71xx.ipk.
Installing usb-modeswitch (2014-08-26-993a9a542791953c4804f7ddbb3a07756738e37a) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … switch_201 4-08-26-993a9a542791953c4804f7ddbb3a07756738e37a_ar71xx.ipk.
Installing libusb-1.0 (1.0.19-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 1.0_1.0.19- 1_ar71xx.ipk.
Installing libpthread (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ead_0.9.33. 2-1_ar71xx.ipk.
Installing librt (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 9.33.2-1_a r71xx.ipk.
Configuring chat.
Configuring comgt.
Configuring kmod-usb-serial.
Configuring kmod-usb-serial-sierrawireless.
Configuring kmod-mii.
Configuring kmod-usb-net.
Configuring kmod-usb-net-sierrawireless.
Configuring comgt-directip.
Configuring libpthread.
Configuring kmod-usb-wdm.
Configuring kmod-usb-net-qmi-wwan.
Configuring kmod-usb-net-cdc-ncm.
Configuring kmod-usb-net-cdc-mbim.
Configuring librt.
Configuring libusb-1.0.
Configuring usb-modeswitch.
Configuring wwan.
Configuring uqmi.
Configuring comgt-ncm.
Configuring umbim.
root@OpenWrt:~# uci del network.wan
root@OpenWrt:~# uci set network.wan=interface
root@OpenWrt:~# uci set network.wan.proto=wwan
root@OpenWrt:~# uci set network.wan.pincode=1234
root@OpenWrt:~# uci set network.wan.apn=internet
root@OpenWrt:~# uci commit network
uci: I/O error

mam nadzieję że nie jest to związane że najpierw konfiguruje jako AP klient - (tak muszę aby mieć dostęp)

odblokowanie przez at^u2diag=256 zrobiłem z powodzeniem w konsoli .

Cezary · 2015-07-07 05:23:51

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Pokaż logread po tym jak wyskoczy ten błąd.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-07 07:51:24

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Dodam że extroot na sformatowanej karcie w modemie robię tak

# block detect > /etc/config/fstab
# uci set fstab.@mount[0].target=/overlay
# uci set fstab.@mount[0].enabled=1
# uci commit fstab
# reboot

Kartę formatuje (poprzez zainicjuj) w tunerze nbox :-D Ale to chyba też niema wpływu - bo wszystko widać, intsaluje się ..noo prócz 3g . Zaraz edytuje z logread.

tym razem zrobiłem w kolejności 1- AP klient 2-extroot
daje mount i jest tak :
mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/sda1 on /overlay type ext4 (rw,relatime,data=ordered)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 1.8G 2.8M 1.7G 0% /
/dev/root 2.3M 2.3M 0 100% /rom
tmpfs 13.9M 80.0K 13.8M 1% /tmp
/dev/sda1 1.8G 2.8M 1.7G 0% /overlay
overlayfs:/overlay 1.8G 2.8M 1.7G 0% /
tmpfs 512.0K 0 512.0K 0% /dev

Cezary · 2015-07-07 08:05:52

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Pokaż logread, bo będzie widać czy przełączyłeś modem na stałe czy nie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-07 08:07:31

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

login as: root
root@192.168.1.1's password:

BusyBox v1.23.2 (2015-06-15 21:29:03 CEST) built-in shell (ash)

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M

----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer (r46163) |
| Build time: 2015-07-04 07:00 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1 |
| Uptime: 0d, 00:06:33 |
| Load: 0.08 0.08 0.05 |
| Flash: total: 1.8GB, free: 1.7GB, used: 0% |
| Memory: total: 27.9MB, free: 16.1MB, used: 42% |
| WAN: 192.168.43.181, proto: dhcp |
| LAN: 192.168.1.1 |
| radio0: mode: sta, ssid: moja_siec, channel: 11, conn: 1 |
----------------------------------------------------------------
root@OpenWrt:~# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/sda1 on /overlay type ext4 (rw,relatime,data=ordered)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/up per,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 1.8G 2.8M 1.7G 0% /
/dev/root 2.3M 2.3M 0 100% /rom
tmpfs 13.9M 80.0K 13.8M 1% /tmp
/dev/sda1 1.8G 2.8M 1.7G 0% /overlay
overlayfs:/overlay 1.8G 2.8M 1.7G 0% /
tmpfs 512.0K 0 512.0K 0% /dev
root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/base/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/luci/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_luci.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/luci/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/management/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/packages/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/routing/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/telephony/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_telephony.
Downloading http://downloads.openwrt.org/chaos_calm … /generic/p ackages/telephony/Packages.sig.
Signature check passed.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ackages.gz.
Updated list of available packages in /var/opkg-lists/eko1.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ckages.sig.
Signature check passed.
root@OpenWrt:~# opkg install wwan comgt chat comgt-ncm comgt-directip uqmi umbim
usb-modeswitch
Installing wwan (2014-07-17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 4-07-17-1_ ar71xx.ipk.
Installing comgt (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 32-25_ar71 xx.ipk.
Installing chat (2.4.7-6) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … .7-6_ar71x x.ipk.
Package chat (2.4.7-6) installed in root is up to date.
Installing comgt-ncm (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … m_0.32-25_ ar71xx.ipk.
Installing comgt-directip (0.32-25) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … rectip_0.3 2-25_ar71xx.ipk.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawire less) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name mark ed HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-mii and kmod-mii) providing same name marked HOLD or PRE FER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-sierrawireless and kmod-usb-net-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Installing kmod-usb-serial (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … b-serial_3. 18.17-1_ar71xx.ipk.
Installing kmod-usb-serial-sierrawireless (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -serial-si errawireless_3.18.17-1_ar71xx.ipk.
Installing kmod-usb-net (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … b-net_3.18. 17-1_ar71xx.ipk.
Installing kmod-mii (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … _3.18.17-1 _ar71xx.ipk.
Installing kmod-usb-net-sierrawireless (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-sierr awireless_3.18.17-1_ar71xx.ipk.
Installing uqmi (2014-12-03-86bcdb8cca652676a78b2df8b5e3fb27a40c60a4) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 4-12-03-86 bcdb8cca652676a78b2df8b5e3fb27a40c60a4_ar71xx.ipk.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-qmi-wwan and kmod-usb-net-qmi-wwan) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked H OLD or PREFER. Using latest.
Installing kmod-usb-net-qmi-wwan (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-qmi-w wan_3.18.17-1_ar71xx.ipk.
Installing kmod-usb-wdm (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … b-wdm_3.18. 17-1_ar71xx.ipk.
Installing umbim (2015-04-09-af9c293c1f1d8a97fbd8adf9c6070ead4920ca84) to root.. .
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 15-04-09-a f9c293c1f1d8a97fbd8adf9c6070ead4920ca84_ar71xx.ipk.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-mbim and kmod-usb-net-cdc-mbim) providing sa me name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-wdm and kmod-usb-wdm) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net-cdc-ncm and kmod-usb-net-cdc-ncm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOL D or PREFER. Using latest.
Installing kmod-usb-net-cdc-mbim (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-cdc-m bim_3.18.17-1_ar71xx.ipk.
Installing kmod-usb-net-cdc-ncm (3.18.17-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … -net-cdc-n cm_3.18.17-1_ar71xx.ipk.
Installing usb-modeswitch (2014-08-26-993a9a542791953c4804f7ddbb3a07756738e37a) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … switch_201 4-08-26-993a9a542791953c4804f7ddbb3a07756738e37a_ar71xx.ipk.
Installing libusb-1.0 (1.0.19-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 1.0_1.0.19- 1_ar71xx.ipk.
Installing libpthread (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ead_0.9.33. 2-1_ar71xx.ipk.
Installing librt (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … 9.33.2-1_a r71xx.ipk.
Configuring chat.
Configuring comgt.
Configuring kmod-usb-serial.
Configuring kmod-usb-serial-sierrawireless.
Configuring kmod-mii.
Configuring kmod-usb-net.
Configuring kmod-usb-net-sierrawireless.
Configuring comgt-directip.
Configuring libpthread.
Configuring kmod-usb-wdm.
Configuring kmod-usb-net-qmi-wwan.
Configuring kmod-usb-net-cdc-ncm.
Configuring kmod-usb-net-cdc-mbim.
Configuring librt.
Configuring libusb-1.0.
Configuring usb-modeswitch.
Configuring wwan.
Configuring uqmi.
Configuring comgt-ncm.
Configuring umbim.
root@OpenWrt:~# uci del network.wan
root@OpenWrt:~# uci set network.wan=interface
root@OpenWrt:~# uci set network.wan.proto=wwan
root@OpenWrt:~# uci set network.wan.pincode=1234
root@OpenWrt:~# uci set network.wan.apn=internet
root@OpenWrt:~# uci commit network
uci: I/O error
root@OpenWrt:~# logread
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 20.990000] cfg80211: (5250000 K Hz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.000000] cfg80211: (5490000 K Hz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.000000] cfg80211: (5735000 K Hz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.010000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.020000] ip_tables: (C) 2000-20 06 Netfilter Core Team
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.120000] PPP generic driver ver sion 2.4.2
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.130000] NET: Registered protoc ol family 24
Tue Jul 7 08:54:08 2015 kern.warn kernel: [ 21.190000] PCI: Enabling device 0 000:00:00.0 (0000 -> 0002)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.210000] ath: phy0: Enable LNA combining
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.210000] ath: EEPROM regdomain : 0x0
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.210000] ath: EEPROM indicates default country code should be used
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.210000] ath: doing EEPROM cou ntry->regdmn map search
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.210000] ath: country maps to regdmn code: 0x3a
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.210000] ath: Country alpha2 b eing used: US
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.210000] ath: Regpair used: 0x 3a
Tue Jul 7 08:54:08 2015 kern.debug kernel: [ 21.230000] ieee80211 phy0: Selec ted rate control algorithm 'minstrel_ht'
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.230000] ieee80211 phy0: Athero s AR9285 Rev:2 mem=0xb0000000, irq=40
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.240000] cfg80211: Calling CRDA for country: US
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.240000] cfg80211: Regulatory d omain changed to country: US
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.250000] cfg80211: DFS Master region: FCC
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.250000] cfg80211: (start_fre q - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.260000] cfg80211: (2402000 K Hz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.270000] cfg80211: (5170000 K Hz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.280000] cfg80211: (5250000 K Hz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.290000] cfg80211: (5735000 K Hz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Tue Jul 7 08:54:08 2015 kern.info kernel: [ 21.300000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Jul 7 08:54:10 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Tue Jul 7 08:54:10 2015 daemon.err block: /dev/sda1 is already mounted
Tue Jul 7 08:54:11 2015 cron.info crond[874]: crond (busybox 1.23.2) started, l og level 5
Tue Jul 7 08:54:11 2015 kern.notice kernel: [ 26.790000] random: nonblocking pool is initialized
Tue Jul 7 08:54:12 2015 authpriv.info dropbear[892]: Not backgrounding
Tue Jul 7 08:54:13 2015 user.emerg syslog: setting up led USB
Tue Jul 7 08:54:13 2015 daemon.info procd: - init complete -
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'lan' is enabled
Tue Jul 7 08:54:14 2015 kern.info kernel: [ 29.810000] device eth0 entered pr omiscuous mode
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'lan' is setting up now
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'lan' is now up
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'loopback' is enabled
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'loopback' is setting u p now
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'loopback' is now up
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'wan6' is enabled
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Network device 'lo' link is up
Tue Jul 7 08:54:14 2015 daemon.notice netifd: Interface 'loopback' has link con nectivity
Tue Jul 7 08:54:14 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.640000] cfg80211: Calling CRDA for country: PL
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.670000] cfg80211: Regulatory d omain changed to country: PL
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.670000] cfg80211: DFS Master region: ETSI
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.680000] cfg80211: (start_fre q - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.690000] cfg80211: (2402000 K Hz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.690000] cfg80211: (5170000 K Hz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.700000] cfg80211: (5250000 K Hz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.710000] cfg80211: (5490000 K Hz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
Tue Jul 7 08:54:15 2015 kern.info kernel: [ 30.720000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Jul 7 08:54:16 2015 kern.info kernel: [ 32.000000] eth0: link up (1000Mbp s/Full duplex)
Tue Jul 7 08:54:16 2015 kern.info kernel: [ 32.000000] br-lan: port 1(eth0) e ntered forwarding state
Tue Jul 7 08:54:16 2015 kern.info kernel: [ 32.010000] br-lan: port 1(eth0) e ntered forwarding state
Tue Jul 7 08:54:16 2015 daemon.notice netifd: Network device 'eth0' link is up
Tue Jul 7 08:54:16 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Jul 7 08:54:16 2015 daemon.notice netifd: Interface 'lan' has link connecti vity
Tue Jul 7 08:54:16 2015 daemon.notice netifd: radio0 (962): Successfully initia lized wpa_supplicant
Tue Jul 7 08:54:17 2015 daemon.notice netifd: Interface 'wan' is enabled
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 33.890000] wlan0: authenticate wi th 1c:7b:21:4f:b7:22
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 33.910000] wlan0: send auth to 1c :7b:21:4f:b7:22 (try 1/3)
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 33.920000] wlan0: authenticated
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 33.960000] wlan0: associate with 1c:7b:21:4f:b7:22 (try 1/3)
Tue Jul 7 08:54:18 2015 daemon.notice netifd: Network device 'wlan0' link is up
Tue Jul 7 08:54:18 2015 daemon.notice netifd: Interface 'wan' has link connecti vity
Tue Jul 7 08:54:18 2015 daemon.notice netifd: Interface 'wan' is setting up now
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 33.980000] wlan0: RX AssocResp fr om 1c:7b:21:4f:b7:22 (capab=0x8431 status=0 aid=6)
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 33.990000] wlan0: associated
Tue Jul 7 08:54:18 2015 kern.info kernel: [ 34.010000] br-lan: port 1(eth0) e ntered forwarding state
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq[1150]: started, version 2.73 caches ize 150
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq[1150]: compile time options: IPv6 G NU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipse t no-auth no-DNSSEC loop-detect inotify
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq[1150]: DNS service limited to local subnets
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq-dhcp[1150]: DHCP, IP range 192.168. 1.100 -- 192.168.1.249, lease time 12h
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq[1150]: using local addresses only f or domain lan
Tue Jul 7 08:54:18 2015 daemon.warn dnsmasq[1150]: no servers found in /tmp/res olv.conf.auto, will retry
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq[1150]: read /etc/hosts - 1 addresse s
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq[1150]: read /tmp/hosts/dhcp - 1 add resses
Tue Jul 7 08:54:18 2015 daemon.info dnsmasq-dhcp[1150]: read /etc/ethers - 0 ad dresses
Tue Jul 7 08:54:18 2015 daemon.notice netifd: wan (1171): udhcpc (v1.23.2) star ted
Tue Jul 7 08:54:19 2015 daemon.notice netifd: wan (1171): Sending discover...
Tue Jul 7 08:54:19 2015 daemon.notice netifd: wan (1171): Sending select for 19 2.168.43.181...
Tue Jul 7 08:54:19 2015 daemon.notice netifd: wan (1171): Lease of 192.168.43.1 81 obtained, lease time 3600
Tue Jul 7 08:54:19 2015 daemon.notice netifd: Interface 'wan' is now up
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1150]: reading /tmp/resolv.conf.aut o
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1150]: using local addresses only f or domain lan
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1150]: using nameserver 192.168.43. 1#53
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1150]: exiting on receipt of SIGTER M
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1225]: started, version 2.73 caches ize 150
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1225]: compile time options: IPv6 G NU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipse t no-auth no-DNSSEC loop-detect inotify
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq[1225]: DNS service limited to local subnets
Tue Jul 7 08:54:19 2015 daemon.info dnsmasq-dhcp[1225]: DHCP, IP range 192.168. 1.100 -- 192.168.1.249, lease time 12h
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq[1225]: using local addresses only f or domain lan
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq[1225]: reading /tmp/resolv.conf.aut o
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq[1225]: using local addresses only f or domain lan
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq[1225]: using nameserver 192.168.43. 1#53
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq[1225]: read /etc/hosts - 1 addresse s
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq[1225]: read /tmp/hosts/dhcp - 1 add resses
Tue Jul 7 08:54:20 2015 daemon.info dnsmasq-dhcp[1225]: read /etc/ethers - 0 ad dresses
Tue Jul 7 08:54:20 2015 user.notice firewall: Reloading firewall due to ifup of wan (wlan0)
Tue Jul 7 08:54:21 2015 daemon.info dnsmasq-dhcp[1225]: DHCPREQUEST(br-lan) 192 .168.1.121 ec:f4:bb:8a:e5:e3
Tue Jul 7 08:54:21 2015 daemon.info dnsmasq-dhcp[1225]: DHCPACK(br-lan) 192.168 .1.121 ec:f4:bb:8a:e5:e3 Arek
Tue Jul 7 08:56:03 2015 authpriv.info dropbear[1294]: Child connection from 192 .168.1.121:61831
Tue Jul 7 08:56:17 2015 authpriv.notice dropbear[1294]: Password auth succeeded for 'root' from 192.168.1.121:61831
Tue Jul 7 09:00:41 2015 authpriv.info dropbear[1294]: Exit (root): Exited norma lly
Tue Jul 7 09:00:46 2015 authpriv.info dropbear[1381]: Child connection from 192 .168.1.121:61860
Tue Jul 7 09:00:59 2015 authpriv.notice dropbear[1381]: Password auth succeeded for 'root' from 192.168.1.121:61860
Tue Jul 7 09:03:12 2015 kern.info kernel: [ 525.890000] usbcore: registered ne w interface driver usbserial
Tue Jul 7 09:03:12 2015 kern.info kernel: [ 525.900000] usbcore: registered ne w interface driver usbserial_generic
Tue Jul 7 09:03:12 2015 kern.info kernel: [ 525.900000] usbserial: USB Serial support registered for generic
Tue Jul 7 09:03:12 2015 kern.info kernel: [ 526.010000] usbcore: registered ne w interface driver sierra
Tue Jul 7 09:03:12 2015 kern.info kernel: [ 526.010000] usbserial: USB Serial support registered for Sierra USB modem
Tue Jul 7 09:03:13 2015 kern.info kernel: [ 526.330000] usbcore: registered ne w interface driver sierra_net
Tue Jul 7 09:03:13 2015 kern.info kernel: [ 526.560000] usbcore: registered ne w interface driver cdc_wdm
Tue Jul 7 09:03:13 2015 kern.info kernel: [ 526.660000] usbcore: registered ne w interface driver qmi_wwan
Tue Jul 7 09:03:13 2015 kern.info kernel: [ 526.770000] usbcore: registered ne w interface driver cdc_ncm
Tue Jul 7 09:03:13 2015 kern.info kernel: [ 526.870000] usbcore: registered ne w interface driver cdc_mbim
Tue Jul 7 09:03:14 2015 kern.info kernel: [ 527.660000] usb 1-1: USB disconnec t, device number 2
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.680000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 469 (offset 0 size 4096 starting block 33450)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.680000] Buffer I/O error on dev ice sda1, logical block 33449
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.730000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 470 (offset 0 size 4096 starting block 33451)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.730000] Buffer I/O error on dev ice sda1, logical block 33450
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.800000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 471 (offset 0 size 4096 starting block 33452)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.800000] Buffer I/O error on dev ice sda1, logical block 33451
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.840000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 472 (offset 0 size 4096 starting block 33453)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.840000] Buffer I/O error on dev ice sda1, logical block 33452
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.860000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 473 (offset 0 size 4096 starting block 33454)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.860000] Buffer I/O error on dev ice sda1, logical block 33453
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.920000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 474 (offset 0 size 2867 2 starting block 33461)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.920000] Buffer I/O error on dev ice sda1, logical block 33454
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.920000] Buffer I/O error on dev ice sda1, logical block 33455
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.920000] Buffer I/O error on dev ice sda1, logical block 33456
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.920000] Buffer I/O error on dev ice sda1, logical block 33457
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.920000] Buffer I/O error on dev ice sda1, logical block 33458
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 528.040000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 475 (offset 0 size 4096 starting block 33462)
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 528.070000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 476 (offset 0 size 4096 starting block 33463)
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 528.100000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 477 (offset 0 size 4096 starting block 33464)
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 528.120000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 570 (offset 0 size 2048 0 starting block 34309)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 528.170000] Aborting journal on dev ice sda1-8.
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 528.170000] JBD2: Error -5 detected when updating journal superblock for sda1-8.
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 528.200000] blk_update_request: I/O error, dev sda, sector 0
Tue Jul 7 09:03:15 2015 kern.notice kernel: [ 528.210000] sd 1:0:0:0: [sda] Sy nchronizing SCSI cache
Tue Jul 7 09:03:15 2015 kern.info kernel: [ 528.210000] sd 1:0:0:0: [sda]
Tue Jul 7 09:03:15 2015 kern.warn kernel: [ 528.220000] Result: hostbyte=0x01 driverbyte=0x00
Tue Jul 7 09:03:15 2015 kern.crit kernel: [ 528.480000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #62: comm ls: reading directory lblock 0
Tue Jul 7 09:03:19 2015 kern.info kernel: [ 532.840000] usb 1-1: new high-spee d USB device number 3 using ehci-platform
Tue Jul 7 09:03:20 2015 kern.info kernel: [ 533.340000] usb-storage 1-1:1.3: U SB Mass Storage device detected
Tue Jul 7 09:03:20 2015 kern.info kernel: [ 533.350000] scsi host2: usb-storag e 1-1:1.3
Tue Jul 7 09:03:20 2015 kern.warn kernel: [ 533.370000] EXT4-fs warning: 84 ca llbacks suppressed
Tue Jul 7 09:03:20 2015 kern.warn kernel: [ 533.380000] EXT4-fs warning (devic e sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 62, blo ck 0)
Tue Jul 7 09:03:20 2015 kern.warn kernel: [ 533.420000] EXT4-fs warning (devic e sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 62, blo ck 0)
Tue Jul 7 09:03:20 2015 kern.warn kernel: [ 533.460000] EXT4-fs warning (devic e sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 62, blo ck 0)
Tue Jul 7 09:03:20 2015 kern.warn kernel: [ 533.500000] EXT4-fs warning (devic e sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 62, blo ck 0)
Tue Jul 7 09:03:20 2015 kern.warn kernel: [ 533.540000] EXT4-fs warning (devic e sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 62, blo ck 0)
Tue Jul 7 09:03:22 2015 kern.notice kernel: [ 535.940000] scsi 2:0:0:0: Direct -Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
Tue Jul 7 09:03:22 2015 kern.notice kernel: [ 535.960000] sd 2:0:0:0: [sdb] At tached SCSI removable disk
Tue Jul 7 09:03:22 2015 daemon.err block: Unkown action change
Tue Jul 7 09:03:22 2015 daemon.err block: Unkown action change
Tue Jul 7 09:04:31 2015 kern.crit kernel: [ 604.840000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #19: comm uci: reading directory lblock 0
Tue Jul 7 09:04:31 2015 kern.crit kernel: [ 604.850000] EXT4-fs error (device sda1): ext4_read_inode_bitmap:185: comm uci: Cannot read inode bitmap - block_gr oup = 0, inode_bitmap = 134
Tue Jul 7 09:04:31 2015 kern.crit kernel: [ 604.860000] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal
Tue Jul 7 09:04:31 2015 kern.crit kernel: [ 604.870000] EXT4-fs (sda1): Remoun ting filesystem read-only
Tue Jul 7 09:04:56 2015 kern.crit kernel: [ 629.600000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #441: comm ash: reading directory lblock 0
Tue Jul 7 09:04:56 2015 kern.crit kernel: [ 629.610000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #421: comm ash: reading directory lblock 0
Tue Jul 7 09:04:56 2015 kern.crit kernel: [ 629.620000] EXT4-fs error (device sda1): ext4_find_entry:1289: inode #517: comm ash: reading directory lblock 0
root@OpenWrt:~#

Cezary · 2015-07-07 08:23:47

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Tue Jul 7 09:03:14 2015 kern.info kernel: [ 527.660000] usb 1-1: USB disconnec t, device number 2
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.680000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 469 (offset 0 size 4096 starting block 33450)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.680000] Buffer I/O error on dev ice sda1, logical block 33449
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.730000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 470 (offset 0 size 4096 starting block 33451)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.730000] Buffer I/O error on dev ice sda1, logical block 33450
Tue Jul 7 09:03:14 2015 kern.warn kernel: [ 527.800000] EXT4-fs warning (devic e sda1): ext4_end_bio:317: I/O error -5 writing to inode 471 (offset 0 size 4096 starting block 33452)
Tue Jul 7 09:03:14 2015 kern.err kernel: [ 527.800000] Buffer I/O error on dev ice sda1, logical block 33451

Tobie się nośnik podczas startu routera rozłącza. Hub usb się kłania pewnie, ale skoro hub to możesz i na zwykłym pendrive to zrobić/

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-07 08:33:28

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

tzn chodzi tu o zasilanie ? czy ten własnej roboty kabelek USB z dodatkowym zasilaniem by pomógł tutaj?
ale przecież jak dałem "mount" i potem df -h" to było widać kartę.

Chyba zostanę na gargoyle .
tak przy okazji - jak bym z poziomu cc luci zaktualizował do gargoyle to wcześniej zrobiony extroot się wysypie chyba ?

Scotch · 2015-07-07 08:34:22

Scotch
Użytkownik
Nieaktywny

Zarejestrowany: 2014-12-05
Posty: 334

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Ja z kolei radzę wrócić do starego BB
Komentarz z tego wątku: http://eko.one.pl/forum/viewtopic.php?id=9622

build000 napisał/a:

Nie sadzajcie CC RC1 - skopana/niepełna obsługa USB i kilka innych rdzeniowych spraw - w sumie w miarę udana wersja to min. r45702

Z którym się w zupełności zgadzam

Pozdrawiam

arek1194 · 2015-07-07 08:47:18

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

No dobra czyli np wgram obraz .bin przez botloader (bo itak mam wszystko podłączone)
i wtedy będę mogł dograć luci i to wszystko taj jak w CC ?
No a czy z tym rozłączaniem się nośnika ? i tak nie wiadomo jak będzie?

Cezary · 2015-07-07 08:51:42

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Zrób firstboota, nie konfiguruj nic samodzielnie, podłącz modem i pokaż wynik logread jeszcze raz. Może to ty coś za bardzo przerabiasz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-07 09:17:25

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

=== IMPORTANT ============================
Use 'passwd' to set your login password
this will disable telnet and enable SSH
------------------------------------------

BusyBox v1.23.2 (2015-06-15 21:29:03 CEST) built-in shell (ash)

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M

----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer (r46163) |
| Build time: 2015-07-04 07:00 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1 |
| Uptime: 0d, 00:01:37 |
| Load: 0.25 0.12 0.05 |
| Flash: total: 384KB, free: 152KB, used: 60% |
| Memory: total: 27.9MB, free: 15.9MB, used: 43% |
| WAN: |
| LAN: 192.168.1.1 |
----------------------------------------------------------------
root@OpenWrt:/# logread
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.630000] NET: Registered protoc ol family 2
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.640000] TCP established hash t able entries: 1024 (order: 0, 4096 bytes)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.640000] TCP bind hash table en tries: 1024 (order: 0, 4096 bytes)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.650000] TCP: Hash tables confi gured (established 1024 bind 1024)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.660000] TCP: reno registered
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.660000] UDP hash table entries : 256 (order: 0, 4096 bytes)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.670000] UDP-Lite hash table en tries: 256 (order: 0, 4096 bytes)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.670000] NET: Registered protoc ol family 1
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 0.680000] PCI: CLS 0 bytes, def ault 32
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.680000] futex hash table entri es: 256 (order: -1, 3072 bytes)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.690000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.700000] jffs2: version 2.2 (NA ND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.710000] msgmni has been set to 55
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.710000] io scheduler noop regi stered
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.720000] io scheduler deadline registered (default)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.720000] Serial: 8250/16550 dri ver, 16 ports, IRQ sharing enabled
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.730000] console [ttyS0] disabl ed
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.760000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.770000] console [ttyS0] enable d
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.770000] bootconsole [early0] d isabled
Sat Jul 4 07:21:07 2015 kern.warn kernel: [ 0.780000] m25p80 spi0.0: found e n25f32, expected m25p80
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.790000] m25p80 spi0.0: en25f32 (4096 Kbytes)
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.790000] 5 tp-link partitions found on MTD device spi0.0
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.800000] Creating 5 MTD parti tions on "spi0.0":
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.810000] 0x000000000000-0x000 000020000 : "u-boot"
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.810000] 0x000000020000-0x000 000145600 : "kernel"
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.820000] 0x000000145600-0x000 0003f0000 : "rootfs"
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.820000] mtd: device 2 (rootf s) set to be root filesystem
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.830000] 1 squashfs-split par titions found on MTD device rootfs
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.840000] 0x000000390000-0x000 0003f0000 : "rootfs_data"
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.840000] 0x0000003f0000-0x000 000400000 : "art"
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 0.850000] 0x000000020000-0x000 0003f0000 : "firmware"
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 0.890000] libphy: ag71xx_mdio: p robed
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 1.480000] ag71xx-mdio.1: Found a n AR7240/AR9330 built-in switch
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 1.520000] eth0: Atheros AG71xx a t 0xba000000, irq 5, mode:GMII
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.110000] ag71xx ag71xx.0: conne cted to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.120000] eth1: Atheros AG71xx a t 0xb9000000, irq 4, mode:MII
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.120000] TCP: cubic registered
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.130000] NET: Registered protoc ol family 17
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.130000] bridge: automatic filt ering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_n etfilter if you need this.
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 2.150000] Bridge firewalling r egistered
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.150000] 8021q: 802.1Q VLAN Sup port v1.8
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.170000] VFS: Mounted root (squ ashfs filesystem) readonly on device 31:2.
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 2.170000] Freeing unused kernel memory: 264K (8039e000 - 803e0000)
Sat Jul 4 07:21:07 2015 user.info kernel: [ 3.480000] init: Console is alive
Sat Jul 4 07:21:07 2015 user.info kernel: [ 3.480000] init: - watchdog -
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.570000] usbcore: registered ne w interface driver usbfs
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.580000] usbcore: registered ne w interface driver hub
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.580000] usbcore: registered ne w device driver usb
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 5.640000] SCSI subsystem initi alized
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.650000] ehci_hcd: USB 2.0 'Enh anced' Host Controller (EHCI) Driver
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.660000] ehci-platform: EHCI ge neric platform driver
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.670000] ehci-platform ehci-pla tform: EHCI Host Controller
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.670000] ehci-platform ehci-pla tform: new USB bus registered, assigned bus number 1
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.680000] ehci-platform ehci-pla tform: irq 3, io mem 0x1b000000
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.710000] ehci-platform ehci-pla tform: USB 2.0 started, EHCI 1.00
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.710000] hub 1-0:1.0: USB hub f ound
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.720000] hub 1-0:1.0: 1 port de tected
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.720000] ohci_hcd: USB 1.1 'Ope n' Host Controller (OHCI) Driver
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.730000] ohci-platform: OHCI ge neric platform driver
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 5.740000] usbcore: registered ne w interface driver usb-storage
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 6.040000] usb 1-1: new high-spee d USB device number 2 using ehci-platform
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 6.450000] usb-storage 1-1:1.0: U SB Mass Storage device detected
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 6.460000] scsi host0: usb-storag e 1-1:1.0
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 6.460000] usb-storage 1-1:1.1: U SB Mass Storage device detected
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 6.470000] scsi host1: usb-storag e 1-1:1.1
Sat Jul 4 07:21:07 2015 user.info kernel: [ 6.630000] init: - preinit -
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 7.420000] random: procd urando m read with 12 bits of entropy available
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 8.820000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 8.830000] scsi 1:0:0:0: Direct -Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 8.850000] sd 1:0:0:0: [sda] At tached SCSI removable disk
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 9.480000] eth0: link up (1000Mbp s/Full duplex)
Sat Jul 4 07:21:07 2015 user.info kernel: [ 10.790000] mount_root: loading km ods from internal overlay
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 11.180000] jffs2: notice: (411) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.200000] block: attempting to l oad /tmp/jffs_cfg/upper/etc/config/fstab
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.210000] block: unable to load c onfiguration (fstab: Entry not found)
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.210000] block: attempting to l oad /tmp/jffs_cfg/etc/config/fstab
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.220000] block: unable to load c onfiguration (fstab: Entry not found)
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.230000] block: attempting to l oad /etc/config/fstab
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.230000] block: unable to load c onfiguration (fstab: Entry not found)
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.240000] block: no usable config uration
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 11.280000] jffs2: notice: (408) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.440000] block: attempting to l oad /tmp/jffs_cfg/upper/etc/config/fstab
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.440000] block: unable to load c onfiguration (fstab: Entry not found)
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.450000] block: attempting to l oad /tmp/jffs_cfg/etc/config/fstab
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.460000] block: unable to load c onfiguration (fstab: Entry not found)
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.460000] block: attempting to l oad /etc/config/fstab
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.470000] block: unable to load c onfiguration (fstab: Entry not found)
Sat Jul 4 07:21:07 2015 user.err kernel: [ 11.480000] block: no usable config uration
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.480000] mount_root: overlay fi lesystem has not been fully initialized yet
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.490000] mount_root: switching to jffs2 overlay
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 11.540000] eth0: link down
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.550000] procd: - early -
Sat Jul 4 07:21:07 2015 user.info kernel: [ 11.560000] procd: - watchdog -
Sat Jul 4 07:21:07 2015 user.info kernel: [ 12.450000] procd: - ubus -
Sat Jul 4 07:21:07 2015 user.info kernel: [ 13.460000] procd: - init -
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.310000] Loading modules backpo rted from Linux version master-2015-03-09-0-g141f155
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.320000] Backport generated by backports.git backports-20150129-0-gdd4a670
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.330000] nf_conntrack version 0 .5.0 (445 buckets, 1780 max)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.380000] xt_time: kernel timezo ne is -0000
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.430000] cfg80211: Calling CRDA to update world regulatory domain
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.430000] cfg80211: World regula tory domain updated:
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.440000] cfg80211: DFS Master region: unset
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.440000] cfg80211: (start_fre q - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.450000] cfg80211: (2402000 K Hz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.460000] cfg80211: (2457000 K Hz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.470000] cfg80211: (2474000 K Hz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.480000] cfg80211: (5170000 K Hz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.480000] cfg80211: (5250000 K Hz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.490000] cfg80211: (5490000 K Hz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.500000] cfg80211: (5735000 K Hz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.510000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.520000] ip_tables: (C) 2000-20 06 Netfilter Core Team
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.610000] PPP generic driver ver sion 2.4.2
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.620000] NET: Registered protoc ol family 24
Sat Jul 4 07:21:07 2015 kern.warn kernel: [ 14.690000] PCI: Enabling device 0 000:00:00.0 (0000 -> 0002)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.700000] ath: phy0: Enable LNA combining
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.710000] ath: EEPROM regdomain : 0x0
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.710000] ath: EEPROM indicates default country code should be used
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.710000] ath: doing EEPROM cou ntry->regdmn map search
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.710000] ath: country maps to regdmn code: 0x3a
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.710000] ath: Country alpha2 b eing used: US
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.710000] ath: Regpair used: 0x 3a
Sat Jul 4 07:21:07 2015 kern.debug kernel: [ 14.720000] ieee80211 phy0: Selec ted rate control algorithm 'minstrel_ht'
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.730000] ieee80211 phy0: Athero s AR9285 Rev:2 mem=0xb0000000, irq=40
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.740000] cfg80211: Calling CRDA for country: US
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.740000] cfg80211: Regulatory d omain changed to country: US
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.750000] cfg80211: DFS Master region: FCC
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.750000] cfg80211: (start_fre q - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.760000] cfg80211: (2402000 K Hz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.770000] cfg80211: (5170000 K Hz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.780000] cfg80211: (5250000 K Hz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.790000] cfg80211: (5735000 K Hz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 14.800000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 17.320000] sd 1:0:0:0: [sda] 38 17472 512-byte logical blocks: (1.95 GB/1.82 GiB)
Sat Jul 4 07:21:07 2015 kern.notice kernel: [ 17.340000] sd 1:0:0:0: [sda] Wr ite cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sat Jul 4 07:21:07 2015 kern.info kernel: [ 17.360000] sda: sda1
Sat Jul 4 07:21:09 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Sat Jul 4 07:21:09 2015 user.emerg syslog: 'radio0' is disabled
Sat Jul 4 07:21:09 2015 user.emerg syslog: 'radio0' is disabled
Sat Jul 4 07:21:10 2015 daemon.err block: /dev/mtdblock3 is already mounted
Sat Jul 4 07:21:10 2015 cron.info crond[992]: crond (busybox 1.23.2) started, l og level 5
Sat Jul 4 07:21:12 2015 user.emerg syslog: setting up led USB
Sat Jul 4 07:21:12 2015 daemon.info procd: - init complete -
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'lan' is enabled
Sat Jul 4 07:21:14 2015 kern.info kernel: [ 25.580000] device eth0 entered pr omiscuous mode
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'lan' is setting up now
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'lan' is now up
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'loopback' is enabled
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'loopback' is setting u p now
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'loopback' is now up
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'wan' is enabled
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'wan6' is enabled
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Network device 'lo' link is up
Sat Jul 4 07:21:14 2015 daemon.notice netifd: Interface 'loopback' has link con nectivity
Sat Jul 4 07:21:14 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Jul 4 07:21:16 2015 kern.info kernel: [ 27.780000] eth0: link up (1000Mbp s/Full duplex)
Sat Jul 4 07:21:16 2015 kern.info kernel: [ 27.780000] br-lan: port 1(eth0) e ntered forwarding state
Sat Jul 4 07:21:16 2015 kern.info kernel: [ 27.790000] br-lan: port 1(eth0) e ntered forwarding state
Sat Jul 4 07:21:16 2015 daemon.notice netifd: Network device 'eth0' link is up
Sat Jul 4 07:21:16 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Sat Jul 4 07:21:16 2015 daemon.notice netifd: Interface 'lan' has link connecti vity
Sat Jul 4 07:21:18 2015 kern.info kernel: [ 29.790000] br-lan: port 1(eth0) e ntered forwarding state
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq[1131]: started, version 2.73 caches ize 150
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq[1131]: compile time options: IPv6 G NU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipse t no-auth no-DNSSEC loop-detect inotify
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq[1131]: DNS service limited to local subnets
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq-dhcp[1131]: DHCP, IP range 192.168. 1.100 -- 192.168.1.249, lease time 12h
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq[1131]: using local addresses only f or domain lan
Sat Jul 4 07:21:20 2015 daemon.warn dnsmasq[1131]: no servers found in /tmp/res olv.conf.auto, will retry
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq[1131]: read /etc/hosts - 1 addresse s
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq[1131]: read /tmp/hosts/dhcp - 1 add resses
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq-dhcp[1131]: read /etc/ethers - 0 ad dresses
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq-dhcp[1131]: DHCPREQUEST(br-lan) 192 .168.1.121 ec:f4:bb:8a:e5:e3
Sat Jul 4 07:21:20 2015 daemon.info dnsmasq-dhcp[1131]: DHCPACK(br-lan) 192.168 .1.121 ec:f4:bb:8a:e5:e3 Arek
Sat Jul 4 07:21:39 2015 authpriv.info dropbear[1213]: Not backgrounding
Sat Jul 4 07:21:48 2015 kern.notice kernel: [ 59.770000] random: nonblocking pool is initialized
Sat Jul 4 07:21:55 2015 authpriv.info dropbear[1218]: Child connection from 192 .168.1.121:62717
Sat Jul 4 07:22:08 2015 authpriv.warn dropbear[1218]: User 'root' has blank pas sword, rejected
Sat Jul 4 07:22:13 2015 authpriv.warn dropbear[1218]: User 'root' has blank pas sword, rejected
Sat Jul 4 07:22:20 2015 authpriv.warn dropbear[1218]: User 'root' has blank pas sword, rejected
Sat Jul 4 07:22:23 2015 authpriv.info dropbear[1218]: Exit before auth (user 'r oot', 3 fails): Exited normally
root@OpenWrt:/#

tak wygląda po świeżym przez botloader , i jeszcze firstboot
bez żadnej konfuguracji

Cezary · 2015-07-07 09:26:19

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Pokaż jeszcze cat /sys/kernel/debug/usb/devices tak bez żadnej konfiguracji.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-07 09:37:27

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

ale jak mam to pokazać (proszę o wyrozumiałość) :-)

jęsli miałem tam zajrzeć przez winscp to ten plik jest pusty zero kb

Cezary · 2015-07-07 09:41:21

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Przez ssh/telnet się zloguj i wykonaj to polecenie: cat /sys/kernel/debug/usb/devices

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

arek1194 · 2015-07-07 09:46:21

arek1194
Użytkownik
Nieaktywny

Zarejestrowany: 2012-11-22
Posty: 351

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

login as: root
root@192.168.1.1's password:

BusyBox v1.23.2 (2015-06-15 21:29:03 CEST) built-in shell (ash)

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M

----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer (r46163) |
| Build time: 2015-07-04 07:00 CEST |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1 |
| Uptime: 0d, 00:32:08 |
| Load: 0.07 0.03 0.05 |
| Flash: total: 384KB, free: 148KB, used: 61% |
| Memory: total: 27.9MB, free: 15.4MB, used: 44% |
| WAN: |
| LAN: 192.168.1.1 |
| radio0: mode: ap, ssid: moja_siec, channel: 11, conn: 0 |
----------------------------------------------------------------
root@OpenWrt:~# cat /sys/kernel/debug/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.18
S: Manufacturer=Linux 3.18.17 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1c0b Rev= 1.02
S: Manufacturer=HUAWEI
S: Product=HUAWEI Mobile
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@OpenWrt:~#

Cezary · 2015-07-07 09:49:13

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,893

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Neee, ty w ogóle nie masz przełączonego tego modemu (u2diag). Robiąc później z niego normalny modem i instalując wszystko łącznie z usb-modeswitch powodujesz jego przełączenie w tryb modemu a tym samym rozłączenie nosnika i błędy extroota.
Albo przełącz modem na stałe albo zastosuj jedną z metod opisanych na eko.one.pl

Tak jak masz teraz powinieneś od razu widzieć interfejsy (choć bez sterowników) a nie tylko usb-storage.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

FAQ o OpenWrt | Sprzedam różne routery | Oddam

TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173 (Strona 1 z 2)

Posty: 1 do 25 z 32

1 Temat przez arek1194 2015-07-06 18:42:18

Temat: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

2 Odpowiedź przez Cezary 2015-07-06 18:44:40

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

3 Odpowiedź przez Cezary 2015-07-06 18:46:22

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

4 Odpowiedź przez arek1194 2015-07-06 19:08:59

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

5 Odpowiedź przez mar_w 2015-07-06 19:23:56

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

6 Odpowiedź przez arek1194 2015-07-06 19:25:59 (edytowany przez arek1194 2015-07-06 19:29:22)

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

7 Odpowiedź przez Cezary 2015-07-06 19:37:53

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

8 Odpowiedź przez mar_w 2015-07-06 19:47:02

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

9 Odpowiedź przez Cezary 2015-07-06 19:47:53

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

10 Odpowiedź przez arek1194 2015-07-06 22:13:51 (edytowany przez arek1194 2015-07-06 22:24:21)

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

11 Odpowiedź przez Cezary 2015-07-07 05:23:51

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

12 Odpowiedź przez arek1194 2015-07-07 07:51:24 (edytowany przez arek1194 2015-07-07 08:00:39)

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

13 Odpowiedź przez Cezary 2015-07-07 08:05:52

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

14 Odpowiedź przez arek1194 2015-07-07 08:07:31

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

15 Odpowiedź przez Cezary 2015-07-07 08:23:47

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

16 Odpowiedź przez arek1194 2015-07-07 08:33:28

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

17 Odpowiedź przez Scotch 2015-07-07 08:34:22

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

18 Odpowiedź przez arek1194 2015-07-07 08:47:18

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

19 Odpowiedź przez Cezary 2015-07-07 08:51:42

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

20 Odpowiedź przez arek1194 2015-07-07 09:17:25

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

21 Odpowiedź przez Cezary 2015-07-07 09:26:19

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

22 Odpowiedź przez arek1194 2015-07-07 09:37:27

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

23 Odpowiedź przez Cezary 2015-07-07 09:41:21

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

24 Odpowiedź przez arek1194 2015-07-07 09:46:21

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

25 Odpowiedź przez Cezary 2015-07-07 09:49:13

Odp: TP TL-MR3220v1 +Extroot nie umiem "zrobić" połączenia 3G -huawei e173

Posty: 1 do 25 z 32