Cześć

Kupiłem modem Huawei E3372 (na obudowie ma napisane MTC), wgrałem na TP-Link TL-MR3420 v2 OpenWRT Gargoyle 1.6.2.2 (r42647), by obsy. Po podłączeniu do rutera modem nie jest wykrywany automatycznie, przedstawia się jako:

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=MOBILE
S:  Product=MOBILE
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=62 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=61 Driver=(none)
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=76 Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
I:  If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=76 Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Czyli nie tak jak wszystkie pozostałe jakie spotkałem na forum. W żaden sposób nie mogę dojść z nim do porozumienia. Na TP-linkowym firmware to samo, ciągły stan inicjalizacji, brak urządzenia na liście.

Dorzucam jeszcze log po odłączeniu i podłączeniu modemu do portu USB.

Apr 16 18:29:41 Gargoyle kern.info kernel: [ 4988.200000] usb 1-1: USB disconnect, device number 9
Apr 16 18:29:54 Gargoyle kern.info kernel: [ 5001.060000] usb 1-1: new high-speed USB device number 10 using ehci-platform
Apr 16 18:29:54 Gargoyle kern.info kernel: [ 5001.290000] scsi12 : usb-storage 1-1:1.0
Apr 16 18:29:54 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=MOBILE Product=MOBILE Serial=0123456789ABCDEF
Apr 16 18:29:54 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:15e7 for mode switching
Apr 16 18:29:54 Gargoyle syslog.notice usb_modeswitch: switch device 12d1:15e7 on 001/010
Apr 16 18:29:54 Gargoyle kern.warn kernel: [ 5001.400000] usb 1-1: usbfs: process 6767 (usb_modeswitch) did not claim interface 0 before use
Apr 16 18:29:54 Gargoyle kern.info kernel: [ 5001.430000] usb 1-1: USB disconnect, device number 10
Apr 16 18:29:55 Gargoyle kern.info kernel: [ 5002.180000] usb 1-1: new high-speed USB device number 11 using ehci-platform
Apr 16 18:29:55 Gargoyle kern.info kernel: [ 5002.430000] scsi13 : usb-storage 1-1:1.3
Apr 16 18:29:55 Gargoyle kern.info kernel: [ 5002.430000] scsi14 : usb-storage 1-1:1.4
Apr 16 18:29:56 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=MOBILE Product=MOBILE Serial=?
Apr 16 18:29:56 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=MOBILE Product=MOBILE Serial=?
Apr 16 18:29:56 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Manufacturer=MOBILE Product=MOBILE Serial=?
Apr 16 18:29:56 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Manufacturer=MOBILE Product=MOBILE Serial=?
Apr 16 18:29:56 Gargoyle user.notice usb-modeswitch: 1-1:1.4: Manufacturer=MOBILE Product=MOBILE Serial=?
Apr 16 18:29:56 Gargoyle kern.notice kernel: [ 5003.430000] scsi 13:0:0:0: CD-ROM            Mass     storage          ffff PQ: 0 ANSI: 2
Apr 16 18:29:56 Gargoyle kern.notice kernel: [ 5003.450000] scsi 14:0:0:0: Direct-Access     TF CARD  storage          ffff PQ: 0 ANSI: 2
Apr 16 18:29:56 Gargoyle kern.notice kernel: [ 5003.480000] sd 14:0:0:0: [sda] Attached SCSI removable disk
Success

Podłączony do komputera modem działa poprawnie.

Da radę jakoś dogadać się z tym modemem czy pieniądze stracone?