1 Temat przez elcidx

  • elcidx
  • elcidx
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-09-04
  • Posty: 41

Temat: TpLink 1043NDv2 sam się resetuje Gargoyle

Mam dziwną przypadłość która się dzisiaj objawiła, router sam z siebie robi restart, nagle błysną wszystkie diody i startuje od zera, dlaczego tak się dzieje?

Wcześniej nigdy nie miałem takich przebojów.
Modem E3272 HiLink podłączony przez hub aktywny, zestaw działa bez problemów od września.
Logi sprzed chwili:

Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.860000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.880000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.880000] hub 2-0:1.0: USB hub found
Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.890000] hub 2-0:1.0: 1 port detected
Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.930000] Initializing USB Mass Storage driver...
Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.940000] usbcore: registered new interface driver usb-storage
Jan  1 01:00:38 Gargoyle kern.info kernel: [    9.940000] USB Mass Storage support registered.
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.070000] usbcore: registered new interface driver ums-alauda
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.090000] usbcore: registered new interface driver ums-cypress
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.100000] usbcore: registered new interface driver ums-datafab
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.110000] usbcore: registered new interface driver ums-freecom
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.120000] usbcore: registered new interface driver ums-isd200
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.130000] usbcore: registered new interface driver ums-jumpshot
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.140000] usbcore: registered new interface driver ums-karma
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.150000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.160000] usbcore: registered new interface driver ums-sddr09
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.180000] usbcore: registered new interface driver ums-sddr55
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.190000] usbcore: registered new interface driver ums-usbat
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.340000] hub 1-1:1.0: USB hub found
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.340000] hub 1-1:1.0: 4 ports detected
Jan  1 01:00:38 Gargoyle kern.info kernel: [   10.640000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.150000] eth0: link down
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.560000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.560000] Backport generated by backports.git backports-20140320-37-g5c33da0
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.710000] cfg80211: Calling CRDA to update world regulatory domain
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.720000] cfg80211: World regulatory domain updated:
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.720000] cfg80211:  DFS Master region: unset
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.720000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.730000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.740000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   31.970000] NET: Registered protocol family 10
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.920000] ath: EEPROM regdomain: 0x0
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.920000] ath: EEPROM indicates default country code should be used
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.920000] ath: doing EEPROM country->regdmn map search
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.920000] ath: country maps to regdmn code: 0x3a
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.920000] ath: Country alpha2 being used: US
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.920000] ath: Regpair used: 0x3a
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.930000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 01:00:38 Gargoyle kern.debug kernel: [   32.930000] Registered led device: ath9k-phy0
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.930000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.940000] cfg80211: Calling CRDA for country: US
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.950000] cfg80211: Regulatory domain changed to country: US
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.950000] cfg80211:  DFS Master region: unset
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.960000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.970000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   32.980000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.210000] RPC: Registered named UNIX socket transport module.
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.220000] RPC: Registered udp transport module.
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.220000] RPC: Registered tcp transport module.
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.230000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.560000] PPP generic driver version 2.4.2
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.650000] tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.660000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.740000] GRE over IPv4 demultiplexor driver
Jan  1 01:00:38 Gargoyle kern.info kernel: [   33.750000] GRE over IPv4 tunneling driver
Jan  1 01:00:38 Gargoyle kern.info kernel: [   34.030000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan  1 01:00:38 Gargoyle kern.info kernel: [   34.120000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:38 Gargoyle kern.info kernel: [   34.510000] NET: Registered protocol family 24
Jan  1 01:00:38 Gargoyle kern.info kernel: [   34.610000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   34.910000] PPTP driver version 0.8.5
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.460000] xt_time: kernel timezone is -0000
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.970000]     Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.970000]     Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:38 Gargoyle kern.info kernel: [   35.980000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.120000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:38 Gargoyle kern.notice kernel: [   36.270000] ip_set: protocol 6
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.710000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.710000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.810000] usbcore: registered new interface driver usblp
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.840000] usbcore: registered new interface driver usbserial
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.840000] USB Serial support registered for generic
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.850000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.860000] usbserial: USB Serial Driver core
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.920000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.930000] usbcore: registered new interface driver sierra
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.930000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:38 Gargoyle kern.info kernel: [   36.950000] usbcore: registered new interface driver sierra_net
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.120000] usbcore: registered new interface driver cdc_wdm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.140000] cdc_ether 1-1.4:1.0: eth2: register 'cdc_ether' at usb-ehci-platform.0-1.4, CDC Ethernet Device, 58:2c:80:13:92:63
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.150000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.260000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.310000] usbcore: registered new interface driver qmi_wwan
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.330000] usbcore: registered new interface driver rndis_host
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.400000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.400000] usbcore: registered new interface driver option
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.410000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.430000] USB Serial support registered for Qualcomm USB modem
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.430000] usbcore: registered new interface driver qcserial
Jan  1 01:00:38 Gargoyle kern.info kernel: [   37.530000] fuse init (API version 7.18)
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.530000] eth1: link up (1000Mbps/Full duplex)
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.530000] device eth1 entered promiscuous mode
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.540000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:42 Gargoyle kern.info kernel: [   42.540000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:42 Gargoyle daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:42 Gargoyle daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:42 Gargoyle daemon.notice netifd: wan (978): udhcpc (v1.19.4) started
Jan  1 01:00:42 Gargoyle user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Jan  1 01:00:42 Gargoyle daemon.notice netifd: wan (978): Sending discover...
Jan  1 01:00:42 Gargoyle daemon.notice netifd: wan (978): Sending select for 192.168.1.100...
Jan  1 01:00:42 Gargoyle daemon.notice netifd: wan (978): Lease of 192.168.1.100 obtained, lease time 86400
Jan  1 01:00:43 Gargoyle daemon.notice netifd: Interface 'wan' is now up
Jan  1 01:00:43 Gargoyle kern.info kernel: [   43.530000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jan  1 01:00:44 Gargoyle kern.info kernel: [   44.540000] br-lan: port 1(eth1) entered forwarding state
Jan  1 01:00:45 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform.0
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.000000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.000000] device wlan0 entered promiscuous mode
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.170000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.170000] br-lan: port 2(wlan0) entered forwarding state
Jan  1 01:00:48 Gargoyle kern.info kernel: [   48.180000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan  1 01:00:48 Gargoyle daemon.info hostapd: wlan0: STA 00:80:92:85:15:6b IEEE 802.11: authenticated
Jan  1 01:00:48 Gargoyle daemon.info hostapd: wlan0: STA 00:80:92:85:15:6b IEEE 802.11: associated (aid 1)
Jan  1 01:00:48 Gargoyle daemon.info hostapd: wlan0: STA 00:80:92:85:15:6b WPA: pairwise key handshake completed (RSN)
Jan  1 01:00:50 Gargoyle kern.info kernel: [   50.170000] br-lan: port 2(wlan0) entered forwarding state
Apr  1 00:00:01 Gargoyle user.notice usb-modeswitch: 2-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform.1
Apr  1 00:00:02 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB_2.0_Hub Serial=?
Apr  1 00:00:02 Gargoyle authpriv.info dropbear[1376]: Running in background
Apr  1 00:00:02 Gargoyle daemon.crit httpd_gargoyle[1430]: bind 0.0.0.0 - Address already in use
Apr  1 00:00:02 Gargoyle daemon.crit httpd_gargoyle[1430]: bind 0.0.0.0 - Address already in use
Apr  1 00:00:02 Gargoyle daemon.warn httpd_gargoyle[1443]: started as root without requesting chroot(), warning only
Apr  1 00:00:02 Gargoyle daemon.notice httpd_gargoyle[1443]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Apr  1 00:00:02 Gargoyle user.notice usb-modeswitch: 1-1.4:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Apr  1 00:00:03 Gargoyle user.notice usb-modeswitch: 1-1.4:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Apr  1 00:00:04 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Apr  1 00:00:04 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Apr  1 00:00:04 Gargoyle user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: started, version 2.66 cachesize 150
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCP, IP range 192.168.8.100 -- 192.168.8.249, lease time 1d
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: using local addresses only for domain lan
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: reading /tmp/resolv.conf.auto
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: using nameserver 208.67.220.220#53
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: using nameserver 208.67.222.222#53
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: using nameserver 208.67.220.220#53
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: using nameserver 208.67.222.222#53
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: using local addresses only for domain lan
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq[1895]: read /etc/hosts - 2 addresses
Apr  1 00:00:08 Gargoyle daemon.info dnsmasq-dhcp[1895]: read /etc/ethers - 0 addresses
Apr  1 00:00:08 Gargoyle user.err syslog: error starting threads: errno 89 (Function not implemented)
Apr  1 00:00:08 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Apr  1 00:00:08 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Apr  1 00:00:08 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Apr  1 00:00:08 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/xtab for writing
Apr  1 00:00:09 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Apr  1 00:00:09 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Apr  1 00:00:11 Gargoyle daemon.info hostapd: wlan0: STA 00:21:6a:5e:c1:de IEEE 802.11: authenticated
Apr  1 00:00:11 Gargoyle daemon.info hostapd: wlan0: STA 00:21:6a:5e:c1:de IEEE 802.11: associated (aid 2)
Apr  1 00:00:11 Gargoyle daemon.info hostapd: wlan0: STA 00:21:6a:5e:c1:de WPA: pairwise key handshake completed (RSN)
Apr  1 00:00:11 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCPREQUEST(br-lan) 192.168.8.128 00:21:6a:5e:c1:de 
Apr  1 00:00:11 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCPACK(br-lan) 192.168.8.128 00:21:6a:5e:c1:de Laptok
Apr  1 13:57:05 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCPDISCOVER(br-lan) 00:80:92:85:15:6b 
Apr  1 13:57:05 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCPOFFER(br-lan) 192.168.8.201 00:80:92:85:15:6b 
Apr  1 13:57:05 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCPREQUEST(br-lan) 192.168.8.201 00:80:92:85:15:6b 
Apr  1 13:57:05 Gargoyle daemon.info dnsmasq-dhcp[1895]: DHCPACK(br-lan) 192.168.8.201 00:80:92:85:15:6b BRW00809285156B
Success

Może to taki żart prima aprillis? tongue

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,646

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

W logach nic o tym nie będzie, logi są w pamięci...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez elcidx (edytowany przez elcidx 2015-04-01 14:33:59)

  • elcidx
  • elcidx
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-09-04
  • Posty: 41

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

Czyli co mam zrobić?

Zauważyłem, że robi się tak na przykład za każdym razem jak chce zrobić speedtest, nawet pingu nie sprawdzi, tylko zawiesi się na chwilę i restart.
Ale i bez tego też się tak robi, jakby przy każdej próbie załadowania strony etc. Albo kilka się załaduje i pada.

I przy okazji, zrywa się też lte przy tym, na modemie gaśnie dioda, po chwili wyszukuje lte i się zapala.

4 Odpowiedź przez g0f3r

  • g0f3r
  • g0f3r
  • Użytkownik
  • Nieaktywny
  • Skąd: Wwa
  • Zarejestrowany: 2014-07-22
  • Posty: 332

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

Zasilacz? Starość?

5 Odpowiedź przez elcidx (edytowany przez elcidx 2015-04-01 15:57:25)

  • elcidx
  • elcidx
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-09-04
  • Posty: 41

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

Podpiąłem bezpośrednio sam modem do laptopa i działa normalnie. Speedtest się robi.
Który zasilacz miał by sprawiać problemy?
Router jak i aktywny hub są nowe z września, więc starymi bym ich nie nazwał.


edit1:
Jeśli chce wgrać na nowo soft do routera, a teraz jest już na nim najnowsza wersja gargoyla, to mam wybrać factory czy sysuprage?

Chciałem wrócić do oficjalnego i wtedy wgrać gargoyla ale obie wersje dostępne na stronie są z bootloaderem "boot w nazwie"

A pomysł stąd, że natrafiłem na podobny problem już opisywany na forum i to niby pomogło.

edit2:
zrobiłem kilka restartów, przywróciłem do ustawień fabrycznych, ustawiłem na nowo i działa jak na razie.
Zobaczymy co będzie dalej.

6 Odpowiedź przez Zarys

  • Zarys
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-11-15
  • Posty: 29

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

Miałem jakiś czas temu podobny problem z tym, że na v1, w konfigu nic nie zmieniane było i nagle zaczął się restartować, dopiero powrót do fabrycznych pomógł. Dzisiaj powtórka z rozrywki, jak nic nie robię to nawet działa, ale jak tylko coś go obciąży (np. próba zrobienia backupu) to od razu restart.

7 Odpowiedź przez patryklu

  • Zarejestrowany: 2013-07-22
  • Posty: 73

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

Może układ się przypalił tongue

8 Odpowiedź przez Zarys

  • Zarys
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-11-15
  • Posty: 29

Odp: TpLink 1043NDv2 sam się resetuje Gargoyle

Widzę, że jeszcze dzisiaj dwie osoby miały taką samą przypadłość. Po wgraniu starego backupu router zaczął działać prawidłowo.