Wszystko fajnie chce sprawdzić jak działa webcam, gdzie na AA 12.09 motion działał, tutaj już nie 
Wgrane według poradnika : http://eko.one.pl/?p=openwrt-webcam
ale nie wyświetla już przy poleceniu :
root@OpenWrt:~# ls -al /dev/video*
ls: /dev/video*: No such file or directory
a motion pokazuje szary ekran z godziną itp ale obrazu nie ma
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 17:09:35 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000f7effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000f7f0000-0x000000000f7f7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000000f7f8000-0x000000000f7fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xf7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 00F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 7 base 0D8000000 mask 0FC000000 write-combining
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0f000000-0x0f3fffff]
[ 0.000000] [mem 0x0f000000-0x0f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x08000000-0x0effffff]
[ 0.000000] [mem 0x08000000-0x0effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x07ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0f400000-0x0f7effff]
[ 0.000000] [mem 0x0f400000-0x0f7effff] page 4k
[ 0.000000] BRK [0x01581000, 0x01581fff] PGTABLE
[ 0.000000] ACPI: RSDP 000fa5f0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 0f7f0000 00028 (v01 AMIINT VIA_P6 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 0f7f0030 00081 (v01 AMIINT VIA_P6 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0f7f0120 02E1E (v01 VIA APOLLO-P 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0f7f8000 00040
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7f0000
[ 0.000000] low ram: 0 - 0f7f0000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0f7effff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0f7effff]
[ 0.000000] On node 0 totalpages: 63374
[ 0.000000] free_area_init_node: node 0, pgdat c14e07c0, node_mem_map cf600020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 464 pages used for memmap
[ 0.000000] Normal zone: 59376 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] e820: [mem 0x0f800000-0xfff7ffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62878
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda2 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8 noinitrd
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 245540k/253888k available (3580k kernel code, 7956k reserved, 1434k data, 348k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] vmalloc : 0xcfff0000 - 0xfffa0000 ( 767 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB)
[ 0.000000] .init : 0xc14e6000 - 0xc153d000 ( 348 kB)
[ 0.000000] .data : 0xc137f344 - 0xc14e5bc0 (1434 kB)
[ 0.000000] .text : 0xc1000000 - 0xc137f344 (3580 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf006000 soft=cf008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 796.121 MHz processor
[ 0.030007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1592.24 BogoMIPS (lpj=7961210)
[ 0.050010] pid_max: default: 32768 minimum: 301
[ 0.060231] Mount-cache hash table entries: 512
[ 0.071024] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.071024] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.071024] tlb_flushall_shift: -1
[ 0.080014] CPU: Centaur VIA Nehemiah (fam: 06, model: 09, stepping: 0a)
[ 0.104699] ACPI: Core revision 20130328
[ 0.122831] ACPI: All ACPI Tables successfully acquired
[ 0.130661] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.141388] Performance Events:
[ 0.151589] NET: Registered protocol family 16
[ 0.161594] ACPI: bus type PCI registered
[ 0.173300] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
[ 0.180008] PCI: Using configuration type 1 for base access
[ 0.206043] bio: create slab <bio-0> at 0
[ 0.210501] ACPI: Added _OSI(Module Device)
[ 0.220015] ACPI: Added _OSI(Processor Device)
[ 0.230010] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.240010] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.251552] ACPI: EC: Look up EC in DSDT
[ 0.266298] ACPI: Interpreter enabled
[ 0.270040] ACPI: (supports S0 S5)
[ 0.280011] ACPI: Using PIC for interrupt routing
[ 0.290416] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.315884] ACPI: Power Resource [URP1] (off)
[ 0.331531] ACPI: Power Resource [URP2] (off)
[ 0.340261] ACPI: Power Resource [FDDP] (off)
[ 0.350259] ACPI: Power Resource [LPTP] (off)
[ 0.366874] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.370358] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.380307] PCI host bridge to bus 0000:00
[ 0.390022] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.400015] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.410014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.420015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.430014] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.440015] pci_bus 0000:00: root bus resource [mem 0x10000000-0xffdfffff]
[ 0.450046] pci 0000:00:00.0: [1106:3123] type 00 class 0x060000
[ 0.450080] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[ 0.450504] pci 0000:00:01.0: [1106:b091] type 01 class 0x060400
[ 0.450585] pci 0000:00:01.0: supports D1
[ 0.450874] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.450945] pci 0000:00:10.0: reg 20: [io 0xec00-0xec1f]
[ 0.451009] pci 0000:00:10.0: supports D1 D2
[ 0.451023] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451310] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
[ 0.453218] pci 0000:00:10.3: reg 10: [mem 0xdfffff00-0xdfffffff]
[ 0.458921] pci 0000:00:10.3: supports D1 D2
[ 0.458935] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459221] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
[ 0.459309] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.460033] pci 0000:00:11.0: quirk: [io 0x0800-0x087f] claimed by vt8235 PM
[ 0.470017] pci 0000:00:11.0: quirk: [io 0x0400-0x040f] claimed by vt8235 SMB
[ 0.480324] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
[ 0.480399] pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.480738] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[ 0.480773] pci 0000:00:11.5: reg 10: [io 0xe800-0xe8ff]
[ 0.480876] pci 0000:00:11.5: supports D1 D2
[ 0.481140] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.481175] pci 0000:00:12.0: reg 10: [io 0xe400-0xe4ff]
[ 0.481199] pci 0000:00:12.0: reg 14: [mem 0xdffffe00-0xdffffeff]
[ 0.481292] pci 0000:00:12.0: supports D1 D2
[ 0.481304] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.481736] pci 0000:01:00.0: [1106:3122] type 00 class 0x030000
[ 0.481771] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
[ 0.481794] pci 0000:01:00.0: reg 14: [mem 0xde000000-0xdeffffff]
[ 0.481845] pci 0000:01:00.0: reg 30: [mem 0xdfef0000-0xdfefffff pref]
[ 0.481893] pci 0000:01:00.0: supports D1 D2
[ 0.482111] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.490032] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff]
[ 0.490049] pci 0000:00:01.0: bridge window [mem 0xd5d00000-0xddcfffff pref]
[ 0.490075] pci_bus 0000:00: on NUMA node 0
[ 0.490101] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.500014] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.520681] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.542939] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.568492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.581215] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.604068] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.604184] Found 1 acpi root devices
[ 0.605222] SCSI subsystem initialized
[ 0.610395] libata version 3.00 loaded.
[ 0.610427] ACPI: bus type USB registered
[ 0.620254] usbcore: registered new interface driver usbfs
[ 0.630134] usbcore: registered new interface driver hub
[ 0.640153] usbcore: registered new device driver usb
[ 0.650512] PCI: Using ACPI for IRQ routing
[ 0.660021] PCI: pci_cache_line_size set to 32 bytes
[ 0.660100] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.660113] e820: reserve RAM buffer [mem 0x0f7f0000-0x0fffffff]
[ 0.661049] Switching to clocksource pit
[ 0.670429] pnp: PnP ACPI init
[ 0.679729] ACPI: bus type PNP registered
[ 0.692636] pnp 00:00: [dma 4]
[ 0.692925] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.693159] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.693365] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.693558] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.693983] pnp 00:04: [dma 2]
[ 0.694305] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.695207] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.696316] pnp 00:06: [dma 3]
[ 0.696826] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.697415] pnp: PnP ACPI: found 7 devices
[ 0.709858] ACPI: bus type PNP unregistered
[ 0.766904] Switching to clocksource acpi_pm
[ 0.779940] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.794967] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff]
[ 0.815422] pci 0000:00:01.0: bridge window [mem 0xd5d00000-0xddcfffff pref]
[ 0.837239] pci 0000:00:01.0: setting latency timer to 64
[ 0.837258] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.837272] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.837287] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.837300] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.837315] pci_bus 0000:00: resource 8 [mem 0x10000000-0xffdfffff]
[ 0.837331] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff]
[ 0.837345] pci_bus 0000:01: resource 2 [mem 0xd5d00000-0xddcfffff pref]
[ 0.837553] NET: Registered protocol family 2
[ 0.851331] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.872683] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.891880] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.911216] TCP: reno registered
[ 0.920999] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.938626] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.957850] NET: Registered protocol family 1
[ 0.971113] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.989223] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 1.006568] PCI: setting IRQ 11 as level-triggered
[ 1.007206] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.024549] PCI: setting IRQ 10 as level-triggered
[ 1.024851] pci 0000:01:00.0: Boot video device
[ 1.024861] PCI: CLS 32 bytes, default 32
[ 1.025744] NatSemi SCx200 Driver
[ 1.051257] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.069107] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.099354] msgmni has been set to 479
[ 1.111298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.133637] io scheduler noop registered
[ 1.145496] io scheduler deadline registered (default)
[ 1.162292] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.187018] ACPI: Power Button [PWRB]
[ 1.198433] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.223112] ACPI: Sleep Button [SLPB]
[ 1.234441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.256766] ACPI: Power Button [PWRF]
[ 1.268643] isapnp: Scanning for PnP cards...
[ 1.638668] isapnp: No Plug & Play device found
[ 1.652803] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.692819] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.713379] Non-volatile memory driver v1.3
[ 1.726122] VIA RNG detected
[ 1.734989] Linux agpgart interface v0.103
[ 1.747659] [drm] Initialized drm 1.1.0 20060810
[ 1.762924] pata_via 0000:00:11.1: version 0.3.4
[ 1.763208] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 1.784332] scsi0 : pata_via
[ 1.793582] scsi1 : pata_via
[ 1.802638] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.823623] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.846268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.866023] ehci-pci: EHCI PCI platform driver
[ 1.879895] ehci-pci 0000:00:10.3: EHCI Host Controller
[ 1.895701] ehci-pci 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 1.918167] ehci-pci 0000:00:10.3: irq 10, io mem 0xdfffff00
[ 1.950052] ehci-pci 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 1.968147] hub 1-0:1.0: USB hub found
[ 1.979560] hub 1-0:1.0: 2 ports detected
[ 1.992054] ehci-platform: EHCI generic platform driver
[ 2.008008] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.026862] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.046418] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.062231] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.084601] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
[ 2.103364] tsc: Refined TSC clocksource calibration: 796.090 MHz
[ 2.121749] Switching to clocksource tsc
[ 2.134223] hub 2-0:1.0: USB hub found
[ 2.145602] hub 2-0:1.0: 2 ports detected
[ 2.158332] usbcore: registered new interface driver usb-storage
[ 2.176902] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.198607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.213623] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.229678] mousedev: PS/2 mouse device common for all mice
[ 2.246672] ata1.00: ATA-0: EMBEDDISK ID128MB, 3.00, max PIO4
[ 2.264267] ata1.00: 250368 sectors, multi 0: LBA
[ 2.279783] rtc_cmos 00:01: RTC can wake from S4
[ 2.294410] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.312898] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[ 2.333339] cpuidle: using governor ladder
[ 2.345739] cpuidle: using governor menu
[ 2.358323] ata1.00: configured for PIO4
[ 2.370664] scsi 0:0:0:0: Direct-Access ATA EMBEDDISK ID128 3.00 PQ: 0 ANSI: 5
[ 2.395781] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.412586] TCP: cubic registered
[ 2.422624] NET: Registered protocol family 17
[ 2.436169] Bridge firewalling registered
[ 2.448309] 8021q: 802.1Q VLAN Support v1.8
[ 2.461285] Using IPI Shortcut mode
[ 2.472186] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.493624] rtc_cmos 00:01: setting system clock to 2015-01-07 10:43:17 UTC (1420627397)
[ 2.519214] sd 0:0:0:0: [sda] 250368 512-byte logical blocks: (128 MB/122 MiB)
[ 2.542094] sd 0:0:0:0: [sda] Write Protect is off
[ 2.556659] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.556740] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.587115] sda: sda1 sda2
[ 2.596918] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.744245] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 2.765634] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 2.785699] Freeing unused kernel memory: 348k freed
[ 3.702049] pps_core: LinuxPPS API ver. 1 registered
[ 3.717126] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.747888] PTP clock support registered
[ 5.946648] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.988191] EXT4-fs warning (device sda1): ext4_update_dynamic_rev:669: updating to rev 1 because of new feature flag, running e2fsck is recommended
[ 6.032852] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.716012] NET: Registered protocol family 10
[ 7.735306] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 7.735306] originally by Donald Becker <becker@scyld.com>
[ 7.735306] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 7.796124] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.817460] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.847260] nf_conntrack version 0.5.0 (3842 buckets, 15368 max)
[ 7.871149] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.895160] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.941642] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.960080] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.978587] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.999482] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 8.028135] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 8.054537] sis900.c: v1.08.10 Apr. 2 2006
[ 8.070408] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 8.101259] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xdffffe00, 44:4d:50:e2:89:4e, IRQ 11
[ 8.128086] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1
[ 8.213885] xt_time: kernel timezone is -0000
[ 8.233687] PPP generic driver version 2.4.2
[ 8.248535] NET: Registered protocol family 24
[ 12.262966] device eth0 entered promiscuous mode
[ 12.330610] br-lan: port 1(eth0) entered forwarding state
[ 12.347005] br-lan: port 1(eth0) entered forwarding state
[ 14.340063] br-lan: port 1(eth0) entered forwarding state
[ 94.815025] br-lan: port 1(eth0) entered disabled state
[ 94.840278] device eth0 left promiscuous mode
[ 94.853745] br-lan: port 1(eth0) entered disabled state
[ 94.881542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 94.914900] device eth0 entered promiscuous mode
[ 94.935328] br-lan: port 1(eth0) entered forwarding state
[ 94.951765] br-lan: port 1(eth0) entered forwarding state
[ 96.950057] br-lan: port 1(eth0) entered forwarding state
[ 237.726380] br-lan: port 1(eth0) entered disabled state
[ 237.754226] device eth0 left promiscuous mode
[ 237.767738] br-lan: port 1(eth0) entered disabled state
[ 237.790861] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 237.859580] device eth0 entered promiscuous mode
[ 237.874624] br-lan: port 1(eth0) entered forwarding state
[ 237.891005] br-lan: port 1(eth0) entered forwarding state
[ 239.890058] br-lan: port 1(eth0) entered forwarding state
[ 378.563807] br-lan: port 1(eth0) entered disabled state
[ 378.588740] device eth0 left promiscuous mode
[ 378.602110] br-lan: port 1(eth0) entered disabled state
[ 378.629754] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 378.662627] device eth0 entered promiscuous mode
[ 378.691718] br-lan: port 1(eth0) entered forwarding state
[ 378.708150] br-lan: port 1(eth0) entered forwarding state
[ 380.700061] br-lan: port 1(eth0) entered forwarding state
[ 468.337953] Linux video capture interface: v2.00
