1 Odpowiedź przez Q.I.N.

(1 odpowiedzi, napisanych Oprogramowanie / Software)

http://eko.one.pl/forum/viewtopic.php?id=712

Do powyższego dodałbym jeszcze radiator na pamięć.

Idź do forum: Oprogramowanie / Software

2 Odpowiedź przez Q.I.N.

(8 odpowiedzi, napisanych Oprogramowanie / Software)

Problem chyba rozwiązany. Przyczynę znalazłem ale zrozumie jej nie mogę:
Dostawca internetu weryfikuje MAC. Jak zakładałem internet miałem inny komputer wiec na obecnym stary MAC przypisałem do karty ręcznie. W routerze również ustawiłem ten sam MAC aby mógł się połączyć. Przy takiej konfiguracji występuje powyższy problem (co ciekawe - pingi poszczałem przez putty z routera, nie z kompa). Wystarczyło przywrócić oryginalny MAC komputera i wszystko działa. Próbowałem kilka razy wpisując stary MAC i przywracając oryginalny - na starym nie ma internetu i pingi przechodzą co kilka minut, na oryginalnym wszystko OK. Jak dla mnie najciekawsze jest to że przed ram-mod wszystko działało na ustawieniach na jakich teraz nie chce smile

Idź do forum: Oprogramowanie / Software

3 Odpowiedź przez Q.I.N.

(12 odpowiedzi, napisanych Oprogramowanie / Software)

gogolek92 napisał/a:

W końcu kupiłem interfejs RS232-TTL z aukcji:
http://allegro.pl/interfejs-rs232-ttl-k … 83707.html
Podłączam i jest odzew rutera w putty, ale gdy piszę tpl nic się nie dzieje. Gdy złączam tx z rx to w putty jest to co napiszę. Męczyłem się ponad godzinę z tym. Do routera podłączam na styk wtyczką 3-pin z której wystają 3 piny. Próbowałem z przodu, z tyłu dalej to samo.
Gdy wpisuje się tpl to w putty będzie widać napis tpl? Dlaczego jak wpisuję tpl nic się nie dzieje?

Jak wpisujesz "tpl" nic się nie będzie działo póki nie pokazy się znak zachęty ar7100>.
1. Sprawdź czy nie masz gdzieś zwarcia TX i RX (w kablu lub na płytce routera) - męczyłem się kilka godzin z wpisywaniem "tpl" bez rezultatu a okazało się ze, podczas lutowania goldpinow do płytki, mała kropelka połączyła TX i RX przy samej płytce...
2. Nie mecz się wpisywaniem "tpl" na klawiaturze. Wpisz "tpl" np. w notatniku, skopiuj, a w putty jak tylko odpowie uboot jak szalony klikaj prawy klawisz myszy (w putty to wkleja skopiowany tekst) - nie ma szans nie trafić w ten odpowiedni moment :)

Jeżeli nadal nie działa - zamień miejscami TX RX (może jednak pomyliłeś się), sprawdź napięcia.
Jeżeli chcesz mieć pewność gdzie TX a gdzie RX - znajdź w internecie opis kości z twojego modułu i prześledź jak idą lutowania.
U mnie po kilku godzinach walki wszystko zadziałało na zwykłym CA-42 od pobliskiego sprzedawcy gsm.

Idź do forum: Oprogramowanie / Software

4 Odpowiedź przez Q.I.N.

(9 odpowiedzi, napisanych Oprogramowanie / Software)

No to wystarczy zrobić np. sambę na openwrt i zmodyfikować samsunga tak jak o tym mowa na stronach dot. SamyGO. Osobiście mam dokładnie taka konfiguracje z TV Samsung xC650 - wszystko bardzo ładnie odtwarza i z kablami nie trzeba biegać smile
Modyfikacja TV bardzo prosta - jeden dodatkowy widget oraz specjalnie przygotowany pendrive do TV ze skryptami. Na ile ja to wszystko zrozumiałem - wystarczy odpiąć pendrive i odinstalować widget i w TV nie ma śladu po modyfikacji.

Idź do forum: Oprogramowanie / Software

5 Odpowiedź przez Q.I.N.

(8 odpowiedzi, napisanych Oprogramowanie / Software)

Obejrzałem całość przez lupę - wszystko na swoim miejscu.
Wydaje mi się że gdyby był to problem "fizycznie" objawy byłyby takie same pod oryginalnym firmware i pod dd-wrt.
Logread nie podpowiedział mi nic niepokojącego ale jestem raczej "początkujący" więc byłbym wdzięczny gdyby ktoś zaawansowany na to spojrzał

root@Gargoyle:~# logread
Jan  1 01:00:08 Gargoyle user.debug kernel: ar71xx-wdt: timeout=15 secs (max=21)
Jan  1 01:00:08 Gargoyle user.info kernel: TCP westwood registered
Jan  1 01:00:08 Gargoyle user.info kernel: NET: Registered protocol family 17
Jan  1 01:00:08 Gargoyle user.notice kernel: Bridge firewalling registered
Jan  1 01:00:08 Gargoyle user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan  1 01:00:08 Gargoyle user.info kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan  1 01:00:08 Gargoyle user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan  1 01:00:08 Gargoyle user.info kernel: Freeing unused kernel memory: 152k freed
Jan  1 01:00:08 Gargoyle user.warn kernel: Please be patient, while OpenWrt loads ...
Jan  1 01:00:08 Gargoyle user.info kernel: input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Jan  1 01:00:08 Gargoyle user.info kernel: Button Hotplug driver version 0.3.1
Jan  1 01:00:08 Gargoyle user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan  1 01:00:08 Gargoyle user.info kernel: eth0: link up (1000Mbps/Full duplex)
Jan  1 01:00:08 Gargoyle user.info kernel: Registered led device: tl-wr1043nd:green:usb
Jan  1 01:00:08 Gargoyle user.info kernel: Registered led device: tl-wr1043nd:green:system
Jan  1 01:00:08 Gargoyle user.info kernel: Registered led device: tl-wr1043nd:green:qss
Jan  1 01:00:08 Gargoyle user.info kernel: Registered led device: tl-wr1043nd:green:wlan
Jan  1 01:00:08 Gargoyle user.info kernel: mini_fo: using base directory: /
Jan  1 01:00:08 Gargoyle user.info kernel: mini_fo: using storage directory: /overlay
Jan  1 01:00:08 Gargoyle user.info kernel: eth0: link down
Jan  1 01:00:09 Gargoyle user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan  1 01:00:09 Gargoyle user.info kernel: eth0: link up (1000Mbps/Full duplex)
Jan  1 01:00:09 Gargoyle user.notice ifup: Enabling Router Solicitations on loopback (lo)
Jan  1 01:00:09 Gargoyle user.info kernel: device eth0.1 entered promiscuous mode
Jan  1 01:00:09 Gargoyle user.info kernel: device eth0 entered promiscuous mode
Jan  1 01:00:09 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering forwarding state
Jan  1 01:00:10 Gargoyle user.info kernel: Compat-wireless backport release: compat-wireless-2011-01-31-4-g86702b3
Jan  1 01:00:10 Gargoyle user.info kernel: Backport based on wireless-testing.git master-2011-02-07
Jan  1 01:00:10 Gargoyle user.info sysinit: Error 1 looking up hostname 0.pl.pool.ntp.org
Jan  1 01:00:10 Gargoyle user.info sysinit: Error 1 looking up hostname 1.pl.pool.ntp.org
Jan  1 01:00:10 Gargoyle user.info sysinit: Error 1 looking up hostname 2.pl.pool.ntp.org
Jan  1 01:00:11 Gargoyle user.notice rdate: Failed to sync with time-b.nist.gov
Jan  1 01:00:11 Gargoyle user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
Jan  1 01:00:11 Gargoyle user.notice ifup: Enabling Router Solicitations on wan (eth0.2)
Jan  1 01:00:11 Gargoyle user.notice rdate: Failed to sync with ptbtime2.ptb.de
Jan  1 01:00:11 Gargoyle user.notice rdate: Failed to sync with ntp.xs4all.nl
Jan  1 01:00:11 Gargoyle user.notice rdate: Failed to sync with time-a.nist.gov
Jan  1 01:00:11 Gargoyle user.notice rdate: Failed to sync with ptbtime1.ptb.de
Jan  1 01:00:11 Gargoyle user.notice rdate: No usable time server for loopback found
Jan  1 01:00:12 Gargoyle user.notice kernel: SCSI subsystem initialized
Jan  1 01:00:13 Gargoyle user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Jan  1 01:00:13 Gargoyle user.info kernel: usbcore: registered new interface driver usbfs
Jan  1 01:00:13 Gargoyle user.info kernel: usbcore: registered new interface driver hub
Jan  1 01:00:14 Gargoyle user.info kernel: usbcore: registered new device driver usb
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211: World regulatory domain updated:
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:14 Gargoyle user.info kernel: cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:16 Gargoyle user.debug kernel: ath: EEPROM regdomain: 0x0
Jan  1 01:00:16 Gargoyle user.debug kernel: ath: EEPROM indicates default country code should be used
Jan  1 01:00:16 Gargoyle user.debug kernel: ath: doing EEPROM country->regdmn map search
Jan  1 01:00:16 Gargoyle user.debug kernel: ath: country maps to regdmn code: 0x3a
Jan  1 01:00:16 Gargoyle user.debug kernel: ath: Country alpha2 being used: US
Jan  1 01:00:16 Gargoyle user.debug kernel: ath: Regpair used: 0x3a
Jan  1 01:00:16 Gargoyle user.debug kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan  1 01:00:16 Gargoyle user.info kernel: ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan  1 01:00:16 Gargoyle user.info kernel: cfg80211: Calling CRDA for country: US
Jan  1 01:00:17 Gargoyle user.info kernel: RPC: Registered udp transport module.
Jan  1 01:00:17 Gargoyle user.info kernel: RPC: Registered tcp transport module.
Jan  1 01:00:17 Gargoyle user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 01:00:17 Gargoyle user.info kernel: PPP generic driver version 2.4.2
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211: Regulatory domain changed to country: US
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:18 Gargoyle user.info kernel: cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan  1 01:00:19 Gargoyle user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan  1 01:00:19 Gargoyle user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 01:00:19 Gargoyle user.info kernel: NET: Registered protocol family 24
Jan  1 01:00:20 Gargoyle user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 01:00:20 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
Jan  1 01:00:20 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
Jan  1 01:00:20 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
Jan  1 01:00:20 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
Jan  1 01:00:20 Gargoyle user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 01:00:20 Gargoyle user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 01:00:20 Gargoyle user.info kernel: hub 1-0:1.0: 1 port detected
Jan  1 01:00:20 Gargoyle user.warn kernel: nf_conntrack version 0.5.0 (967 buckets, 3868 max)
Jan  1 01:00:20 Gargoyle user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jan  1 01:00:20 Gargoyle user.warn kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jan  1 01:00:20 Gargoyle user.warn kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan  1 01:00:20 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_2.6.32.27_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71xx-ehci
Jan  1 01:00:21 Gargoyle user.info kernel: xt_time: kernel timezone is -0000
Jan  1 01:00:22 Gargoyle user.info kernel:      Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:22 Gargoyle user.info kernel:      Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:22 Gargoyle user.info kernel: IMQ driver loaded successfully.
Jan  1 01:00:22 Gargoyle user.info kernel: Ebtables v2.0 registered
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver usbserial
Jan  1 01:00:23 Gargoyle user.info kernel: USB Serial support registered for generic
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:23 Gargoyle user.info kernel: usbserial: USB Serial Driver core
Jan  1 01:00:23 Gargoyle user.info kernel: Initializing USB Mass Storage driver...
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver usb-storage
Jan  1 01:00:23 Gargoyle user.info kernel: USB Mass Storage support registered.
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-alauda
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-cypress
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-datafab
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-freecom
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-isd200
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-jumpshot
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-karma
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-sddr09
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-sddr55
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver ums-usbat
Jan  1 01:00:23 Gargoyle user.info kernel: USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver option
Jan  1 01:00:23 Gargoyle user.info kernel: option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:23 Gargoyle user.info kernel: USB Serial support registered for Sierra USB modem
Jan  1 01:00:23 Gargoyle user.info kernel: usbcore: registered new interface driver sierra
Jan  1 01:00:23 Gargoyle user.info kernel: sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:23 Gargoyle user.info kernel: fuse init (API version 7.13)
Jan  1 01:00:26 Gargoyle user.info sysinit: Error 1 looking up hostname 0.pl.pool.ntp.org
Jan  1 01:00:26 Gargoyle user.info sysinit: Error 1 looking up hostname 1.pl.pool.ntp.org
Jan  1 01:00:26 Gargoyle user.info sysinit: Error 1 looking up hostname 2.pl.pool.ntp.org
Jan  1 01:00:26 Gargoyle user.info sysinit: Loading defaults
Jan  1 01:00:26 Gargoyle user.info sysinit: Loading synflood protection
Jan  1 01:00:26 Gargoyle user.info sysinit: Adding custom chains
Jan  1 01:00:27 Gargoyle user.info sysinit: Loading zones
Jan  1 01:00:27 Gargoyle user.info sysinit: Loading forwarding
Jan  1 01:00:27 Gargoyle user.info sysinit: Loading redirects
Jan  1 01:00:27 Gargoyle user.info sysinit: Loading rules
Jan  1 01:00:27 Gargoyle user.info sysinit: Loading includes
Jan  1 01:00:28 Gargoyle user.info sysinit: Loading zone defaults
Jan  1 01:00:28 Gargoyle user.notice root: adding lan (br-lan) to firewall zone lan
Jan  1 01:00:28 Gargoyle user.notice root: adding wan (eth0.2) to firewall zone wan
Jan  1 01:00:29 Gargoyle user.info sysinit: iptables: Invalid argument. Run `dmesg' for more information.
Jan  1 01:00:30 Gargoyle cron.err crond[1385]: crond (busybox 1.15.3) started, log level 5
Jan  1 01:00:30 Gargoyle cron.err crond[1417]: crond (busybox 1.15.3) started, log level 5
Jan  1 01:00:30 Gargoyle authpriv.info dropbear[1430]: Running in background
Jan  1 01:00:31 Gargoyle daemon.crit httpd_gargoyle[1478]: socket :: - Address family not supported by protocol
Jan  1 01:00:31 Gargoyle daemon.err httpd_gargoyle[1478]: unknown sockaddr family on listen socket - 0
Jan  1 01:00:32 Gargoyle daemon.warn httpd_gargoyle[1506]: started as root without requesting chroot(), warning only
Jan  1 01:00:32 Gargoyle daemon.notice httpd_gargoyle[1506]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan  1 01:00:34 Gargoyle cron.err crond[1791]: crond (busybox 1.15.3) started, log level 5
Jan  1 01:00:34 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan  1 01:00:34 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan  1 01:00:35 Gargoyle user.notice rdate: Failed to sync with ntp.xs4all.nl
Jan  1 01:00:35 Gargoyle user.notice rdate: Failed to sync with ptbtime2.ptb.de
Jan  1 01:00:35 Gargoyle user.notice rdate: Failed to sync with time-a.nist.gov
Jan  1 01:00:35 Gargoyle user.notice rdate: Failed to sync with time-b.nist.gov
Jan  1 01:00:35 Gargoyle user.notice rdate: Failed to sync with ptbtime1.ptb.de
Jan  1 01:00:35 Gargoyle user.notice rdate: No usable time server for wan found
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq[1834]: started, version 2.55 cachesize 150
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq[1834]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq-dhcp[1834]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq[1834]: using local addresses only for domain lan
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq[1834]: reading /tmp/resolv.conf.auto
Jan  1 01:00:38 Gargoyle daemon.warn dnsmasq[1834]: ignoring nameserver 192.168.1.1 - local interface
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq[1834]: using local addresses only for domain lan
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq[1834]: read /etc/hosts - 2 addresses
Jan  1 01:00:38 Gargoyle daemon.info dnsmasq-dhcp[1834]: read /etc/ethers - 0 addresses
Jan  1 01:00:38 Gargoyle daemon.warn exportfs[1850]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 01:00:38 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jan  1 01:00:38 Gargoyle daemon.err exportfs[1850]: can't lock /var/lib/nfs/etab for writing
Jan  1 01:00:38 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jan  1 01:00:39 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan  1 01:00:39 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan  1 01:00:39 Gargoyle user.info sysinit: setting up led WLAN
Jan  1 01:00:39 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Jan  1 01:00:41 Gargoyle authpriv.info dropbear[1889]: Child connection from 192.168.1.2:50070
Jan  1 01:00:45 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan  1 01:00:45 Gargoyle user.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Jan  1 01:00:45 Gargoyle user.notice rdate: Failed to sync with ptbtime2.ptb.de
Jan  1 01:00:45 Gargoyle user.notice rdate: Failed to sync with ntp.xs4all.nl
Jan  1 01:00:45 Gargoyle user.notice rdate: Failed to sync with time-a.nist.gov
Jan  1 01:00:45 Gargoyle user.notice rdate: Failed to sync with time-b.nist.gov
Jan  1 01:00:45 Gargoyle user.notice rdate: Failed to sync with ptbtime1.ptb.de
Jan  1 01:00:45 Gargoyle user.notice rdate: No usable time server for lan found
Jan  1 01:00:49 Gargoyle authpriv.notice dropbear[1889]: password auth succeeded for 'root' from 192.168.1.2:50070
Jan  1 01:01:01 Gargoyle cron.err crond[1791]: USER root pid 1986 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
root@Gargoyle:~#
root@Gargoyle:~# dmesg
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #16 Sat Mar 5 11:58:31 CET 2011
prom: fw_arg0=00000007, fw_arg1=a3f77fb0, fw_arg2=a3f78440, fw_arg3=00000008
MyLoader: sysp=04100606, boardp=00280108, parts=00048400
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat 802daa50, node_mem_map 81000000
  Normal zone: 128 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61704k/65536k available (2123k kernel code, 3760k reserved, 418k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
yaffs Feb 28 2011 19:00:24 Installing.
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=550000, len=2A0000
0x000000550000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.3
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-01-31-4-g86702b3
Backport based on wireless-testing.git master-2011-02-07
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (967 buckets, 3868 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
        Hooked IMQ after mangle on PREROUTING
        Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
Ebtables v2.0 registered
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
ar71xx-wdt: enabling watchdog timer
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
root@Gargoyle:~#

Idź do forum: Oprogramowanie / Software

6 Odpowiedź przez Q.I.N.

(8 odpowiedzi, napisanych Oprogramowanie / Software)

Kość Hynix HY5DU121622CTP-J.

Idź do forum: Oprogramowanie / Software

7 Odpowiedź przez Q.I.N.

(8 odpowiedzi, napisanych Oprogramowanie / Software)

Sprawdzałem kość memtester-em - wszystko ok (można jeszcze jakość sprawdzić?)
I tak jak wspomniałem - na oryginalnym firmware oraz na DD-WRT wszystko działa..
Nie jestem pewny czy to wynik ram-mod czy zbieg okoliczności.. ?

Idź do forum: Oprogramowanie / Software

8 Temat przez Q.I.N.

(8 odpowiedzi, napisanych Oprogramowanie / Software)

Witam,

Przeszukałem cały forum i wydaje mi się ze mam dość nietypowy problem.
Mam TP-Link Wr-1043nd zakupiony ok miesiąc temu. Prawie od razu po zakupie wgrałem openwrt - wszystko ładnie chodziło. Ponieważ mam plany używać ruterek przez dłuższa chwilę, i używać maksymalnie jak się da zdecydowałem się na ram-mod. Za drugim podejściem się udał - mam 64MB smile
Ale po od tej chwili mam problem z internetem pod openwrt. Router ładnie startuje, wg. mnie poprawnie pobiera ustawienia dhcp od dostawcy (internet kablowy - vectra):

oot@OpenWrt:~# ifconfig
eth0.2    Link encap:Ethernet  HWaddr 00:50:8D:45:76:83
          inet addr:88.156.188.209  Bcast:88.156.191.255  Mask:255.255.248.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:432 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:23907 (23.3 KiB)  TX bytes:2981 (2.9 KiB)

I chociaż wszystko wskazuje na to ze router poprawnie się połączył - internet nie działa.
Np. próbuję puścić ping do bramki dostawcy:

root@OpenWrt:~# ping 88.156.184.1
PING 88.156.184.1 (88.156.184.1): 56 data bytes
64 bytes from 88.156.184.1: seq=0 ttl=255 time=5.883 ms

po tej pierwszej linijce jest pustka i cisza....
czasami, po kilkunastu minutach nagle wywala od razu kupę nastepnych wierszy:

64 bytes from 88.156.184.1: seq=0 ttl=255 time=5.883 ms
64 bytes from 88.156.184.1: seq=1 ttl=255 time=8.456 ms
64 bytes from 88.156.184.1: seq=2 ttl=255 time=7.359 ms
64 bytes from 88.156.184.1: seq=3 ttl=255 time=5.381 ms

i td.
i znowu cisza...

Zrobiłem ustawienia WAN na sztywno - bez rezultatu.
Przywróciłem oryginalne firmware TP-Link - wszystko śmiga.
Wgrałem DD-WRT - wszystko OK.
Ponownie wgrałem OpenWrt (wersja od obsy'ego) - ta sama historia (pobrany z ecco.selfip.net/backfire/ --> openwrt-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin)
Ktoś ma pomysły czemu router nie lubi openwrt?
Czy to może być związane z wykonanym ram-mod?

Idź do forum: Oprogramowanie / Software