nie, testowałem z ftdi232 cp2020, konsola openwrt działa wiec połączone wszystko dobrze a uboot i tak nie mogę przerwać
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez rybakowskijakub
Strony 1
nie, testowałem z ftdi232 cp2020, konsola openwrt działa wiec połączone wszystko dobrze a uboot i tak nie mogę przerwać
Dla porównania log z innego er605 z wgranym sprawnym openwrt
===================================================================
MT7621 stage1 code Dec 16 2019 17:45:55 (ASIC)
CPU=500000000 HZ BUS=166666666 HZ
==================================================================
Change MPLL source from XTAL to CR…
do MEMPLL setting..
MEMPLL Config : 0x11000000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL4 FB_DL: 0xe, 1/0 = 745/279 39000000
PLL2 FB_DL: 0x12, 1/0 = 602/422 49000000
PLL3 FB_DL: 0x12, 1/0 = 603/421 49000000
DDR patch working
do DDR setting..[01F40000]
Apply DDR3 Setting…(use default AC)
0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
————————————————————————————————————————
0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
000F:| 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0
0010:| 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
0011:| 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0
0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
DRAMC_DQSCTL1[0e0]=14000000
DRAMC_DQSGCTL[124]=80000000
rank 0 coarse = 16
rank 0 fine = 40
B:| 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0
opt_dle value:8
DRAMC_DDR2CTL[07c]=C287220D
DRAMC_PADCTL4[0e4]=000022B3
DRAMC_DQIDLY1[210]=0B090909
DRAMC_DQIDLY2[214]=06060907
DRAMC_DQIDLY3[218]=09050706
DRAMC_DQIDLY4[21c]=09040907
DRAMC_R0DELDLY[018]=00001D1F
==================================================================
RX DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit| 0 1 2 3 4 5 6 7 8 9
———————————————————
0 | 6 5 6 9 4 9 3 5 3 6
10 | 4 6 6 9 3 8
———————————————————
==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =31 DQS1 = 29
==================================================================
bit DQS0 bit DQS1
0 (1~55)28 8 (1~52)26
1 (1~54)27 9 (1~56)28
2 (1~56)28 10 (1~56)28
3 (1~57)29 11 (1~52)26
4 (1~55)28 12 (1~56)28
5 (2~61)31 13 (1~57)29
6 (1~56)28 14 (1~56)28
7 (1~60)30 15 (1~56)28
==================================================================
3.dq delay value last
==================================================================
bit| 0 1 2 3 4 5 6 7 8 9
———————————————————
0 | 9 9 9 11 7 9 6 6 6 7
10 | 5 9 7 9 4 9
==================================================================
==================================================================
TX perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
DQ loop=15, cmp_err_1 = ffffcdfa
DQ loop=14, cmp_err_1 = ffff019a
DQ loop=13, cmp_err_1 = ffff018a
DQ loop=12, cmp_err_1 = ffff0002
dqs_perbyte_dly.last_dqdly_pass[1]=12, finish count=1
DQ loop=11, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=11, finish count=2
byte:0, (DQS,DQ)=(a,8)
byte:1, (DQS,DQ)=(9,8)
DRAMC_DQODLY1[200]=88888888
DRAMC_DQODLY2[204]=88888888
20,data:9a
[EMI] DRAMC calibration passed
===================================================================
MT7621 stage1 code done
CPU=500000000 HZ BUS=166666666 HZ
===================================================================
U-Boot SPL 2018.09 (Dec 21 2022 - 20:39:08 +0800)
Trying to boot from NAND
[ 0.000000] Linux version 5.15.150 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23809-234f1a2efa) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Fri Mar 22 22:09:42 2024
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is TP-Link ER605 v2
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s17808 r8192 d23152 u49152
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: console=ttyS0,115200 noinitrd ubi.mtd=3,2048
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Writing ErrCtl register=00014202
[ 0.000000] Readback ErrCtl register=00014202
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 249092K/262144K available (7303K kernel code, 629K rwdata, 880K rodata, 1224K init, 225K bss, 13052K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.008057] Calibrating delay loop… 586.13 BogoMIPS (lpj=2930688)
[ 0.066210] pid_max: default: 32768 minimum: 301
[ 0.071633] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.078850] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.090642] rcu: Hierarchical SRCU implementation.
[ 0.096166] smp: Bringing up secondary CPUs …
[ 0.101627] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.101660] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.101675] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.101723] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.160929] Synchronize counters for CPU 1: done.
[ 0.193147] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.193174] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.193187] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.193219] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.252340] Synchronize counters for CPU 2: done.
[ 0.283121] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.283149] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.283161] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.283197] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.337553] Synchronize counters for CPU 3: done.
[ 0.367433] smp: Brought up 1 node, 4 CPUs
[ 0.376705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.386510] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.393595] pinctrl core: initialized pinctrl subsystem
[ 0.400535] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.407208] thermal_sys: Registered thermal governor ‚step_wise’
[ 0.433420] clocksource: Switched to clocksource GIC
[ 0.439991] NET: Registered PF_INET protocol family
[ 0.445064] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.453303] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.461631] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.469348] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.477010] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.484126] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.490585] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.497128] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.504494] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.510121] PCI: CLS 0 bytes, default 32
[ 0.517483] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.529301] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.535173] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.546526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.558297] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.564363] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.570335] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.578144] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.590230] printk: console [ttyS0] disabled
[ 0.594585] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[ 0.603610] printk: console [ttyS0] enabled
[ 0.603610] printk: console [ttyS0] enabled
[ 0.611858] printk: bootconsole [early0] disabled
[ 0.611858] printk: bootconsole [early0] disabled
[ 0.625160] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
[ 0.631527] nand: ESMT PSU1GA30DT
[ 0.634869] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.642430] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[ 0.649042] 5 fixed-partitions partitions found on MTD device mt7621-nand
[ 0.655839] Creating 5 MTD partitions on „mt7621-nand”:
[ 0.661049] 0x000000000000-0x000000080000 : „u-boot”
[ 0.675046] 0x000000080000-0x000000100000 : „u-boot-env”
[ 0.689259] 0x000000100000-0x000000140000 : „factory”
[ 0.699290] 0x000000140000-0x000007e00000 : „firmware”
[ 2.619519] 0x000007e00000-0x000008000000 : „panic-ops”
[ 2.794786] mtk_soc_eth 1e100000.ethernet: generated random MAC address b6:27:ea:ac:11:4c
[ 2.803119] mtk_soc_eth 1e100000.ethernet: generated random MAC address 4a:cd:69:c9:c6:b3
[ 2.812979] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.827638] mtk_soc_eth 1e100000.ethernet dsa: mediatek frame engine at 0xbe100000, irq 21
[ 2.840060] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 2.850538] i2c_dev: i2c /dev entries driver
[ 2.858385] NET: Registered PF_INET6 protocol family
[ 2.866208] Segment Routing with IPv6
[ 2.869958] In-situ OAM (IOAM) with IPv6
[ 2.874061] NET: Registered PF_PACKET protocol family
[ 2.879216] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.892868] 8021q: 802.1Q VLAN Support v1.8
[ 2.904395] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.930950] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
[ 2.938748] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2.944604] mt7530-mdio mdio-bus:1f eth1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=23)
[ 2.959433] mt7530-mdio mdio-bus:1f eth2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=24)
[ 2.972353] mt7530-mdio mdio-bus:1f eth3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=25)
[ 2.985339] mt7530-mdio mdio-bus:1f eth4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=26)
[ 2.997798] DSA: tree 0 setup
[ 3.001806] ubi0: attaching mtd3
[ 6.198811] ubi0: scanning is finished
[ 6.222131] ubi0: attached mtd3 (name „firmware”, size 124 MiB)
[ 6.228118] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.235009] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.241772] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.248720] ubi0: good PEBs: 998, bad PEBs: 0, corrupted PEBs: 0
[ 6.254726] ubi0: user volume: 8, internal volumes: 1, max. volumes count: 128
[ 6.261921] ubi0: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 1659272979
[ 6.271031] ubi0: available PEBs: 0, total reserved PEBs: 998, PEBs reserved for bad PEB handling: 20
[ 6.280263] ubi0: background thread „ubi_bgt0d” started, PID 289
[ 6.283058] block ubiblock0_6: created from ubi0:6(rootfs)
[ 6.291822] ubiblock: device ubiblock0_6 (rootfs) set to be root filesystem
[ 6.306633] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 6.318135] Freeing unused kernel image (initmem) memory: 1224K
[ 6.324121] This architecture does not have kernel memory protection.
[ 6.330550] Run /sbin/init as init process
[ 6.789420] init: Console is alive
[ 6.793312] init: - watchdog -
[ 7.231817] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 7.291337] usbcore: registered new interface driver usbfs
[ 7.297179] usbcore: registered new interface driver hub
[ 7.302656] usbcore: registered new device driver usb
[ 7.319740] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.325215] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 7.337772] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
[ 7.347023] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 7.353065] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.358419] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 7.365914] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 7.373575] hub 1-0:1.0: USB hub found
[ 7.377508] hub 1-0:1.0: 2 ports detected
[ 7.382659] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 7.391969] hub 2-0:1.0: USB hub found
[ 7.395963] hub 2-0:1.0: 1 port detected
[ 7.408490] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.419131] init: - preinit -
[ 8.286788] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.408548] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.845756] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.155117] mtk_soc_eth 1e100000.ethernet dsa: configuring for fixed/rgmii link mode
[ 9.167844] mtk_soc_eth 1e100000.ethernet dsa: Link is Up - 1Gbps/Full - flow control rx/tx
[ 9.173885] mt7530-mdio mdio-bus:1f eth1: configuring for phy/gmii link mode
[ 9.183795] IPv6: ADDRCONF(NETDEV_CHANGE): dsa: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 11.368077] UBIFS (ubi0:7): Mounting in unauthenticated mode
[ 11.374195] UBIFS (ubi0:7): background thread „ubifs_bgt0_7” started, PID 465
[ 11.456256] UBIFS (ubi0:7): recovery needed
[ 11.667866] UBIFS (ubi0:7): recovery completed
[ 11.672595] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name „rootfs_data”
[ 11.680451] UBIFS (ubi0:7): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.690377] UBIFS (ubi0:7): FS size: 114913280 bytes (109 MiB, 905 LEBs), max 916 LEBs, journal size 5713920 bytes (5 MiB, 45 LEBs)
[ 11.702182] UBIFS (ubi0:7): reserved for root: 4952683 bytes (4836 KiB)
[ 11.708792] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID CCDE32E5-D183-4E78-BDBA-DF33AD7251C8, small LPT model
[ 11.734312] mount_root: loading kmods from internal overlay
[ 11.882133] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.155992] SCSI subsystem initialized
[ 12.187706] usbcore: registered new interface driver usb-storage
[ 12.198419] usbcore: registered new interface driver uas
[ 12.204426] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.559525] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.574112] block: extroot: not configured
[ 12.583529] mount_root: switching to ubifs overlay
[ 12.605046] urandom-seed: Seeding with /etc/urandom.seed
[ 12.818196] procd: - early -
[ 12.821353] procd: - watchdog -
[ 13.459697] procd: - watchdog -
[ 13.469751] procd: - ubus -
[ 13.602295] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.616145] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.625557] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.645769] procd: - init -
Please press Enter to activate this console.
[ 14.666045] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.690185] tun: Universal TUN/TAP device driver, 1.6
[ 14.777276] PPP generic driver version 2.4.2
[ 14.783599] NET: Registered PF_PPPOX protocol family
[ 14.809348] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 14.817202] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 14.835297] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 15.684955] urngd: v1.0.2 started.
[ 16.543670] random: crng init done
[ 16.547109] random: 33 urandom warning(s) missed due to ratelimiting
[ 22.080871] mtk_soc_eth 1e100000.ethernet eth0: PHY [mdio-bus:00] driver [MediaTek MT7530 PHY] (irq=POLL)
[ 22.090590] mtk_soc_eth 1e100000.ethernet eth0: configuring for phy/rgmii link mode
[ 22.106003] br-wan: port 1(eth0) entered blocking state
[ 22.111308] br-wan: port 1(eth0) entered disabled state
[ 22.117144] device eth0 entered promiscuous mode
[ 22.137969] mtk_soc_eth 1e100000.ethernet dsa: Link is Down
[ 22.158031] mtk_soc_eth 1e100000.ethernet dsa: configuring for fixed/rgmii link mode
[ 22.166336] mtk_soc_eth 1e100000.ethernet dsa: Link is Up - 1Gbps/Full - flow control rx/tx
[ 22.175468] IPv6: ADDRCONF(NETDEV_CHANGE): dsa: link becomes ready
[ 22.189553] device dsa entered promiscuous mode
[ 22.194736] mt7530-mdio mdio-bus:1f eth2: configuring for phy/gmii link mode
[ 22.205259] br-wan: port 2(eth2) entered blocking state
[ 22.210558] br-wan: port 2(eth2) entered disabled state
[ 22.218504] device eth2 entered promiscuous mode
[ 22.235221] mt7530-mdio mdio-bus:1f eth3: configuring for phy/gmii link mode
[ 22.244993] br-wan: port 3(eth3) entered blocking state
[ 22.250298] br-wan: port 3(eth3) entered disabled state
[ 22.257695] device eth3 entered promiscuous mode
[ 22.269981] mt7530-mdio mdio-bus:1f eth4: configuring for phy/gmii link mode
[ 22.278706] br-wan: port 4(eth4) entered blocking state
[ 22.284045] br-wan: port 4(eth4) entered disabled state
[ 22.291262] device eth4 entered promiscuous mode
[ 22.303329] mt7530-mdio mdio-bus:1f eth1: configuring for phy/gmii link mode
Tak oczywiście, inaczej RX by nie działał. Sprawdzałem multimeterem dla RX i TX połączenie jest między wlutowanymi przewodami a rezystorami do których idą ścieżki od tych zworek. Więc dobrze jest polutowane.
Ctrl+c i nadal zatrzymuje sie na Trying to boot from NAND
zeedytowalem poprzedni post jest to caly log z uart
Witam, initramfs zbrickował router. Podłączyłem UART
Jak teraz przerwać bootowanie i wejść w konsole?
Instrukcja z forum openwrt:
Solder UART Console Port
On the uboot-console "run enphy" (for some reason I could not ping the device or use tftpboot even with this)
From uboot console boot a openwrt initramfs image (used xmodem protocol and the program Teraterm for this)
When on the openwrt console type "ubidetatch -p /dev/mtd3"
Then "wget -O- http://[url to mtd3.img on a local http server] | ubiformat /dev/mtd3 -S [size of the image in bytes] -y -f - "
When finished reboot the device and it should boot to the point you had taken the image.
For completion reasons I also did the failsafe recovery that is described https://www.tp-link.com/in/support/faq/3062/
UART:
===================================================================
MT7621 stage1 code Dec 16 2019 17:45:55 (ASIC)
CPU=500000000 HZ BUS=166666666 HZ
==================================================================
Change MPLL source from XTAL to CR…
do MEMPLL setting..
MEMPLL Config : 0x11000000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL4 FB_DL: 0x8, 1/0 = 612/412 21000000
PLL2 FB_DL: 0x15, 1/0 = 575/449 55000000
PLL3 FB_DL: 0x18, 1/0 = 538/486 61000000
DDR patch working
do DDR setting..[01F40000]
Apply DDR3 Setting…(use default AC)
0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
————————————————————————————————————————
0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
DRAMC_DQSCTL1[0e0]=13000000
DRAMC_DQSGCTL[124]=80000033
rank 0 coarse = 15
rank 0 fine = 72
B:| 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0
opt_dle value:8
DRAMC_DDR2CTL[07c]=C287220D
DRAMC_PADCTL4[0e4]=000022B3
DRAMC_DQIDLY1[210]=09080809
DRAMC_DQIDLY2[214]=05060706
DRAMC_DQIDLY3[218]=0A050605
DRAMC_DQIDLY4[21c]=07030906
DRAMC_R0DELDLY[018]=00001C1E
==================================================================
RX DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit| 0 1 2 3 4 5 6 7 8 9
———————————————————
0 | 7 3 5 7 3 6 3 5 2 6
10 | 4 6 6 9 3 5
———————————————————
==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =30 DQS1 = 28
==================================================================
bit DQS0 bit DQS1
0 (1~55)28 8 (1~50)25
1 (1~50)25 9 (1~56)28
2 (0~54)27 10 (1~54)27
3 (1~55)28 11 (1~48)24
4 (1~53)27 12 (1~55)28
5 (1~57)29 13 (1~55)28
6 (1~53)27 14 (1~55)28
7 (1~59)30 15 (1~52)26
==================================================================
3.dq delay value last
==================================================================
bit| 0 1 2 3 4 5 6 7 8 9
———————————————————
0 | 9 8 8 9 6 7 6 5 5 6
10 | 5 10 6 9 3 7
==================================================================
==================================================================
TX perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
DQ loop=15, cmp_err_1 = ffff05aa
DQ loop=14, cmp_err_1 = ffff0082
dqs_perbyte_dly.last_dqdly_pass[1]=14, finish count=1
DQ loop=13, cmp_err_1 = ffff0082
DQ loop=12, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=12, finish count=2
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(8,8)
DRAMC_DQODLY1[200]=88888888
DRAMC_DQODLY2[204]=88888888
20,data:89
[EMI] DRAMC calibration passed
===================================================================
MT7621 stage1 code done
CPU=500000000 HZ BUS=166666666 HZ
===================================================================
U-Boot SPL 2018.09 (Dec 21 2022 - 20:39:08 +0800)
Trying to boot from NAND
A coś więcej podpowiesz? Jakiś przykład. Nie musi być step by step. Poradzę sobie. Tylko nie jestem tak zaznajomiony z openwrt i nie wiem od czego zacząć zeby to zbootować z ram.
OK doczyałem chyba tylko UART
Próbowałem, wgrywa się "niby" poprawnie ale i tak uruchamia się openwrt. Zresztą na github piszę ,że to nie zadziała i trzeba przez ubiformat. Aczkolwiek z openwrt bezpośrednio chyba nie da się przez ubiformat bo trzeba odmontować wpierw partycje ? Więc domyślam się ze musze go zbootować do bootloadera tylko jak?
"After the install, you will NOT be able to use the recovery mode of the ER605 to flash a factory image to recover from a bad install. You will need to use ubiformat to reflash your mtd3 (firmware) partition if you ever want to restore to the default firmware."
Witam, a może ktoś podpowie jak teraz przywrócić przez ubiformat oryginalne oprogramowanie? Mam kopie, ale rozumiem, że z poziomu openwrt nie będzie to możliwe?
Pozdrawiam
Witam. W końcu podłączyli w mojej "wiosce" światłowód. Wybrałem najwyższą ofertę 900Mbps / 90Mbps. Dostałem od operatora terminal ONT. Chcę dla wygody podpiąć dysk pod router aby miec dostęp zarówno w domu jak i zdalnie do moich projektów które wykonuje do pracy. Operator może zapewnić mi stały publiczny adres IP. Mogę też logować się przez PPPOE na swoim routerze abym mógł mieć kontrolę nad swoim LAN. W tym momencie praktycznie żeby mógł zmienić cokolwiek np adresacje DHCP musiałbym dzwonić do operatora. Więc potrzebuję dobry router. Przeglądałem forum i szukałem w waszej wyszukiwarki. Zainteresował mnie xioami 3g. Jednak nie wiem czy nie będzie problemu z NAT przy takim łączu. W końcu to 900Mbps.
Co oczekuje od routera
-"Ogarnie" takie łączę z PPPOE
-Jakieś sensowne bebechy
-Min 1 port 1Gbps WAN
-Min 1 port 1Gbps port LAN
-Min 1 port USB 3.0
-WiFi nie potrzebuje
-OpenWrt z dobrym wsparciem routera
Chodzi mi, że router dsl-2740b (model niżej) z tą samą kartą obsługuję HT40 w brcm-wl.
Mam kmod-b43 (kmod-mac80211 kmod-cfg80211). Po zmianie na kmod-brcm-wl nie wykrywa WiFi.
No Broadcom wl interface found!
Z tego co wyczytałem Broadcom BCM4321 działa na brcm-wl.
Nie, nie, nie.
Sam router fizycznie obsługuje HT40. Openwrt obsługuje HT40. Wiec szukam jakieś wskazówki. Kompilować obraz od nowa? Szukać innego sterownika? Inne jądro?
Nie będę się rozpisywał, wiec do tematu.
Mam router DSL-2750B z WIFI typu N - mac80211.
Po ustawieniu
option 'htmode' 'HT40'
list 'ht_capab' 'HT40+'
wyskakuje
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): Driver does not support configured HT capability [HT40*]
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): wlan0: interface state COUNTRY_UPDATE->DISABLED
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): wlan0: AP-DISABLED
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): wlan0: Unable to setup interface.
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): wlan0: interface state DISABLED->DISABLED
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): wlan0: AP-DISABLED
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): hostapd_free_hapd_data: Interface wlan0 wasn't started
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Fri Nov 20 01:44:55 2015 kern.info kernel: [17513.194435] device wlan0 left promiscuous mode
Fri Nov 20 01:44:55 2015 kern.info kernel: [17513.199277] br-lan: port 2(wlan0) entered disabled state
Fri Nov 20 01:44:55 2015 daemon.notice netifd: radio0 (7437): Device setup failed: HOSTAPD_START_FAILED
Pomysły co z tym sterownikiem?
Witam!
Muszę wrócić na orginalny system. Jeszcze nie skończył mi się abonament na neostradę więc nie chce przechodzić na LTE jeszcze.
Mam problem próbowałem wgrać orginalny plik bin przez LUCI bez powodzenia. Niby się wgyrwa ale po restarcie nadal jest OPENWRT.
Sysupgrade twierdzi ze router ma za mało pamięci na orginalny system...
sysupgrade DSL-2750B_D1_EU_1.01_02212013.bin
Saving config files...
Sending TERM to remaining processes ... dnsmasq ubusd askfirst logd rpcd netifd odhcpd uhttpd ntpd
Sending KILL to remaining processes ... askfirst ntpd
Switching to ramdisk...
Performing system upgrade...
Image too big for partition: linux
Image check failed.overlayfs:/overlay
/
2.89 MB / 4.69 MB
38% (1.80 MB)
Plik ma prawie 8MB
Jakieś pomysły czemu orginalny system nie mieści się w routerze?
Lub jak zainstalować na kernelu 4.1.11 speedtouch 330?
Poradziłem sobię hotspot na telefonie
/etc/config/wireless
config wifi-device radio0
option type mac80211
option channel 6
option hwmode 11g
option path 'pci0000:00/0000:00:00.0/0000:01:00.0/bcma0:1'
option htmode
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 0
config wifi-iface
option device radio0
option network wan
option mode sta
option ssid Xiaomi
option encryption none
/etc/config/network
[...]
+
config interface 'wan'
option proto 'dhcp'
Witam!
Udało mi się wgrać na mojego dlinka openwrt. Chciałem zainstalować sterowniki do Hilinka jednak okazało się, że musze mieć połączenie z internetem. A połączenia nie mam gdyż nie mam sterownika... Mój router widzi br-lan eth0 eth0.1 no i lo. Czy da się połączyć z neostradą? Bo z tego co czytałem na openwrt router dsl-2750b traci intefejs dsl.
Cześć, to mój pierwszy post. Także witam wszystkich!
Czytam od dłuższego czasu o OpenWRT. Chce zakupić jakiś dobry router co posłuży mi na kilka lat. Jednak nie mogę się na nic zdecydować. Chce przejść z neostrady na play LTE (bo chyba ma najlepszą ofertę, znacie lepszą? Mam zasięg LTE wszystkich sieci). Myślę nad modemem HUAWEI e3372s-153 HiLink. Z tego co widzę jest bardzo popularny i polecany. Mieszkam w dość małym mieście. Nadajnik mam dość blisko około 2km. Na telefonie PLAY osiąga do D: 40Mbps/ U: 20Mbps. Mój kolega mówił mi, że testował PLAY niedaleko nadajnika i osiągał nawet 50Mbps. Czy jest sens kupowania anten? Chce wycisnąć z LTE ile się da. Jak największą prędkość UPLOADU - bo ona mnie najbardziej interesuje. Oraz jak najniższy ping. Oczywiście nie pomijając downloadu który bez anten mnie zadowala (minimum 20Mbps). Dobra a teraz pytanie co do routera. Chce dobry router, porządnie wykonany. Mocne podzespoły. Port USB oczywiście. (Kupie HUB). Wymienne anteny. Szybkie wi-fi, trochę przespałem rozwój wi-fi i zatrzymałem się na b/g. Standart ac niby lepszy od n ale czy warty swoich pieniędzy? Oczywiście openwrt! Proszę doradźcie !
Teraz podsumowanie:
1. HUAWEI e3372s-153 HiLink czy to dobry wybór? Czy znajdzie się coś lepszego?
2. Takie mniej ważne pytanie jak ktoś wie - Play LTE bez limitu czy inny operator?
3. Czy warto inwestować w anteny przy dobrym zasięgu? (stabilność, prędkość max)
4. Jaki router:
-Bezawaryjny
-USB
-Mocne podzespoły
-Wymienne anteny wi-fi
-Szybkie wi-fi (dla gracza) o mocnym zasięgu (2 piętra, jednorodzinny dom)
-OpenWRT i pochodne.
-Cena? Nie chce płacić 600zł za router ale jak warto dopłacić więcej to czemu nie. W ramach rozsądku.
Pozdrawiam! Myślę, że mi pomożecie bo mam mętlik w głowie.
PS. OpenWRT to jest linux? Do czego jest najbardziej podobna? Na co dzień pracuje z ubuntu/debianem.
Strony 1
eko.one.pl → Posty przez rybakowskijakub
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc