Piękne dzięki! Wszystko działa. Domena zablokowana.
Używam starego TP-Link TL-WR1043N/ND v1 bo jest niezawodny i wystarczy do moich zastosowań. Drugi rezerwowy stoi w odwodzie, a nowsze TP-Linki stoją poziomo, co mi nie pasuje.
Pozdrawiam.
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez fsddt
Piękne dzięki! Wszystko działa. Domena zablokowana.
Używam starego TP-Link TL-WR1043N/ND v1 bo jest niezawodny i wystarczy do moich zastosowań. Drugi rezerwowy stoi w odwodzie, a nowsze TP-Linki stoją poziomo, co mi nie pasuje.
Pozdrawiam.
root@OpenWrt:/etc# cat opkg.conf
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
option check_signature 1
Co zmienić?
root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/base/Packages.gz.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/base/Packages.sig.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Signature check failed.
Remove wrong Signature file.
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/telephony/Packages.gz.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/telephony/Packages.sig.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Signature check failed.
Remove wrong Signature file.
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/packages/Packages.gz.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/packages/Packages.sig.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Signature check failed.
Remove wrong Signature file.
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/routing/Packages.gz.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/routing/Packages.sig.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Signature check failed.
Remove wrong Signature file.
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/luci/Packages.gz.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/luci/Packages.sig.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Signature check failed.
Remove wrong Signature file.
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/management/Packages.gz.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Downloading http://downloads.openwrt.org/chaos_calm … eneric/pac kages/management/Packages.sig.
wget: can't execute 'openssl': No such file or directory
wget: error getting response: Connection reset by peer
Signature check failed.
Remove wrong Signature file.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … ckages.gz.
Updated list of available packages in /var/opkg-lists/eko1.
Downloading http://dl.eko.one.pl/chaos_calmer/ar71x … kages.sig.
Signature check passed.
Collected errors:
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/base/Packages.gz, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/base/Packages.sig, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/telephony/Packages.gz, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/telephony/Packages.sig, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/packages/Packages.gz, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/packages/Packages.sig, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/routing/Packages.gz, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/routing/Packages.sig, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/luci/Packages.gz, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/luci/Packages.sig, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/management/Packages.gz, wget returned 1.
* opkg_download: Failed to download http://downloads.openwrt.org/chaos_calmer/1 5.05.1/ar71xx/generic/packages/management/Packages.sig, wget returned 1.
root@OpenWrt:~#
Istnieje tylko dnsmasq 2.73-1
"możesz po prostu blokować domeny"
W jaki sposób? Proszę o wskazówkę, gdzie znaleźć instrukcję.
Czy w ten sposób?
https://eko.one.pl/?p=openwrt-adblock
Niestety według podręcznika
https://eko.one.pl/?p=openwrt-blokady#b … zwiedomeny
nie działa:
root@OpenWrt:~# opkg install dnsmasq-full
Unknown package 'dnsmasq-full'.
Collected errors:
* opkg_install_cmd: Cannot install package dnsmasq-full.
W jaki sposób można zablokować konkretny adres www?
(...) Wgraj jeszcze raz gargoyle. (...)
Być może nieparzysta ilość wgrywania softu odgrywa jakąś rolę, albo po prostu masz wyjątkową MOC. ![]()
0. Wgranie Gargoyle 1.13.02
1. Pierwszy restart - Internet działa.
2. Zmiana hasła - Internet działa.
3. Zmiana identyfikacji z Gargoyle na własną - Internet działa.
4. Zmiana podsieci na własną - Internet działa.
5. Zmiana nazw dostępowych WiFi - Internet działa.
6. Dodanie PC do listy stałych adresów LAN - Internet działa.
7. Speedtest.net PING 3 ms, DOWNLOAD 88.56 Mbps, UPLOAD 54.81 Mbps
8. Włączenie flow offload, Speedtest.net jak w pkt. 7
9. Drugi restart
10. Speedtest.net PING 2 ms, DOWNLOAD 316.62 Mbps, UPLOAD 54.60 Mbps
Wszystko działa jak należy!
Nie wiem jak to możliwe, że wczoraj miałem problemy z negocjacją trybu prędkości na portach, długim i nieskutecznym nawiązywaniem połączenia LAN, brakiem internetu po podłączeniu do WiFi i niską prędkością w speedtest.
Jedyną różnicą dzisiaj było wgrywanie software do routera przy odłączonym kablu od WAN.
Dziękuję, że byłeś blisko i dałeś mi wiarę, co pomogło mi przejść spokojnie konfigurację.
Niczego nie dotykałem w gargolu. Zauważyłem jednak, że moje windows ustawiło sobie połączenie z routerem na 100 Mb.
Dopiero restart przywrócił połączenie na 1 Gb. Muszę więc ponownie wgrać gargola.
edycja.
Potwierdziło się, że Windows skopał mi połączenie.
Teraz Gargul ma:
PING 2 ms
DOWNLOAD 317.23 Mbps
UPLOAD 53.92 Mbps
edycja 2.
Niestety, wszystko działa dobrze do momentu, gdy coś zmienię w ustawieniach Gargula.
I tak, po zmianie podsieci na własną, ustawieniu hasła, zmianie nazwy routera, zmianie nazw dostępowych WiFi i dodaniu PC do listy stałych adresów LAN, router staje się nieaktywny na LAN. Po dłuższej chwili i restarcie można ponownie zalogować się tylko przez WiFi, a router traci kontakt z internetem i nie ma dostępu do niego przez porty LAN. Ping do Orange FunBox, który daje mu internet, działa bezbłędnie.
Przywrócenie firmware od TP-Link i zmianach j.w. nie uszkadza ustawień routera, który działa tak jak powinien.
Wciąż aktualne jest zatem pytanie, co dolega mojej konfiguracji sprzętowo-programowej?
Wieczorem zajrzę do routera ponownie, bo wiem, że jest sprawny na oryginalnym firmware. Tym razem wgram Luci, bo w gargulu 1.13.01 mam taki sam problem.
Było włączone zgodnie z wczenieflowoffload
Na podstawie speedtest.net
TEST_DATE,TIME_ZONE,DOWNLOAD_MEGABITS,UPLOAD_MEGABITS,LATENCY_MS,SERVER_NAME,DISTANCE_MILES,CONNECTION_MODE,SERVER_COUNT
06/05/2022 20:39,GMT,317.84,53.52,6,Krakow,0,multi,4
06/05/2022 20:34,GMT,93.38,53.62,2,Krakow,0,multi,4
06/05/2022 20:33,GMT,94.48,52.98,2,Krakow,0,multi,4
06/05/2022 20:30,GMT,91.22,53.32,3,Krakow,0,multi,4
06/05/2022 20:23,GMT,94.25,53.32,2,Krakow,0,multi,4
06/05/2022 18:42,GMT,102.47,53.59,19,Krakow,0,multi,4
06/05/2022 16:10,GMT,266.93,54.20,2,Krakow,0,multi,4
06/04/2022 12:09,GMT,317.06,54.13,2,Krakow,0,multi,4
06/04/2022 12:07,GMT,142.01,54.66,2,Krakow,0,multi,4
Co może być przyczyną spowolnienie transmisji na Gargoyle 1.13.2 wobec oryginalnego oryginalnego firmware wdr4300v1 150518?
Wgrywam naprzemiennie gargula i tplinka (wdr4300v1_tp_recovery.bin) i nic nie zmienia się.
SUPER!
Modem odpalił w 10 sekund.
Dziękuję. :-D
Zmieniłem tylko pierwszy wiersz.
Podsumowanie.
Huawei E3372h-153 z firmware 21.315.01.00.143_M_U_01.01 działa poprawnie w OpenWrt Chaos Calmer 15.05.1 (r49474).
Zarządza sterownik HUAWEI ew_wwanecm.sys 1.0.10.0.
Podpiety jest pod Mobile Connect - Network Card.
Instalowany przez oem78.inf
; Copyright (c) 2010,2011 Huawei Incorporated
; Manufacturer: Huawei Incorporated
;
; CDC ECM & NCM driver
;
[Version]
Signature="$WINDOWS NT$"
Class=Net
ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
Provider=%Mfg%
DriverVer=11/01/2013,1.0.10.0
CatalogFile=ew_wwanecm.cat
[Manufacturer]
%Mfg% = DeviceList,NTx86,NTamd64
[SourceDisksNames]
1 = %ew_wwanecm.DiskName%,,,""
[SourceDisksFiles]
ew_wwanecm.sys = 1,,
; For Win2K
[DeviceList]
%PNP21_HW_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_16
%PNP21_VDF_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_46
%PNP21_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_76
%PNP21_HW_3G_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_07
%PNP21_VDF_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_37
%PNP21_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_67
%PNP21_HW_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_11
; for logo test
%HUAWEI_NDISDeviceDesc% = ew_wwanecm.ndi, USB\VID_12D1&PID_158F&MI_00
; For WinXP and later
[DeviceList.NTx86]
%PNP21_HW_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_16
%PNP21_VDF_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_46
%PNP21_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_76
%PNP21_HW_3G_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_07
%PNP21_VDF_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_37
%PNP21_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_67
%PNP21_HW_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_11
; for logo test
%HUAWEI_NDISDeviceDesc% = ew_wwanecm.ndi, USB\VID_12D1&PID_158F&MI_00
; For XP and later x64
[DeviceList.NTamd64]
%PNP21_HW_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_16
%PNP21_VDF_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_46
%PNP21_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_76
%PNP21_HW_3G_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_07
%PNP21_VDF_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_37
%PNP21_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_67
%PNP21_HW_NetworkDesc% = ew_wwanecm.ndi, USB\VID_12D1&Subclass_03&Prot_11
; for logo test
%HUAWEI_NDISDeviceDesc% = ew_wwanecm.ndi, USB\VID_12D1&PID_158F&MI_00
;-------------------------------------------------------------------------------
; Virtual Ethernet Adapter
;
[ew_wwanecm.ndi]
*IfType = 243 ; IF_TYPE_WWANPP
*MediaType = 9; NdisMediumWirelessWan
*PhysicalMediaType = 8 ; NdisPhysicalMediumWirelessWan
EnableDhcp = 0 ; DHCP Disabled
Characteristics = 0x84 ; NCF_HAS_UI | NCF_PHYSICAL
BusType = 15 ; if you specify NCF_PHYSICAL, you must specify bustype
AddReg = ew_wwanecm.Reg, ParamsPromiscuous, ParamsFrameType, ParamsIsNtb32, ParamsNTBInputSize, ParamsPacketsAccumulationTimeout, ParamsMaxNumOfDatagramsInNTB, FlowControlTimeOut, DisableAccumulationUpdate, WwanMbimEnable, NcmReinitializeEnable
CopyFiles = ew_wwanecm.CopyFiles
[WWAN_AddReg]
HKR,, Platform,0x00010001,0x3
HKR,, WWAN,0x00010001,0x1
HKR,, "SelectiveSuspendIdleTime", 0x00010001, 0x05
[ew_wwanecm.ndi.Services]
AddService = %ServiceName%, 2, ew_wwanecm.Service, ew_wwanecm.EventLog
[ew_wwanecm.ndi.HW]
AddReg = WWAN_AddReg
;-----------------------------------------------------------------------------
;
[ew_wwanecm.Reg]
HKR, , BusNumber, 0, "0"
HKR, , MPRadioState, 0x00010001, 0x00000001 ;RadioState
HKR, Ndi, Service, 0, "hwusb_wwanecm"
HKR, Ndi\Interfaces, UpperRange, 0, "flpp4" and "flpp6"
HKR, Ndi\Interfaces, LowerRange, 0, "ppip"
[ParamsPromiscuous]
;
; Should the physical NIC be set to Promiscuous mode
;
HKR, Ndi\Params\Promiscuous, ParamDesc, , %Promiscuous%
HKR, Ndi\Params\Promiscuous, Default, ,"0"
HKR, Ndi\Params\Promiscuous, type, , enum
HKR, Ndi\Params\Promiscuous\enum,"1", , %Promiscuous_Enable%
HKR, Ndi\Params\Promiscuous\enum,"0", , %Promiscuous_Disable%
[ParamsFrameType]
HKR, Ndi\Params\FrameType, ParamDesc, 0, %FrameType%
HKR, Ndi\Params\FrameType, type, 0, enum
HKR, Ndi\Params\FrameType, Default, 0, "0"
HKR, Ndi\Params\FrameType\enum,"1", 0, %FrameType_IP%
HKR, Ndi\Params\FrameType\enum,"0", 0, %FrameType_Ethernet%
[ParamsIsNtb32]
HKR, Ndi\Params\IsNtb32, ParamDesc, , %IsNtb32%
HKR, Ndi\Params\IsNtb32, Default, , "1"
HKR, Ndi\Params\IsNtb32, type, , enum
HKR, Ndi\Params\IsNtb32\enum, "1", , "Yes"
HKR, Ndi\Params\IsNtb32\enum, "0", , "No"
[ParamsNTBInputSize]
HKR, Ndi\Params\NTBInputSize, ParamDesc, , %NTBInputSize%
; If the following size is larger than the maximum allowed by the device, the
; maximum value is used. 0 means to use the maximum allowed value of the device.
HKR, Ndi\Params\NTBInputSize, Default, , "0"
HKR, Ndi\Params\NTBInputSize, type, , dword
[ParamsPacketsAccumulationTimeout]
HKR, Ndi\Params\PacketsAccumulationTimeout, ParamDesc, , %PacketsAccumulationTimeout%
; Unit of PacketsAccumulationTimeout is usecs. Default value is 20 us.
HKR, Ndi\Params\PacketsAccumulationTimeout, Default, , "20"
HKR, Ndi\Params\PacketsAccumulationTimeout, type, , dword
[ParamsMaxNumOfDatagramsInNTB]
HKR, Ndi\Params\MaxNumOfDatagramsInNTB, ParamDesc, , %MaxNumOfDatagramsInNTB%
HKR, Ndi\Params\MaxNumOfDatagramsInNTB, Default, , "64"
HKR, Ndi\Params\MaxNumOfDatagramsInNTB, type, , dword
[FlowControlTimeOut]
HKR, Ndi\Params\FlowControlTimeOut, ParamDesc, , %FlowControlTimeout%
HKR, Ndi\Params\FlowControlTimeOut, Default, , "2800"
HKR, Ndi\Params\FlowControlTimeOut, type, , dword
[DisableAccumulationUpdate]
HKR, Ndi\Params\disable_accumulation_update, ParamDesc, , %DisableAccumulationUpdate%
HKR, Ndi\Params\disable_accumulation_update, Default, , "0"
HKR, Ndi\Params\disable_accumulation_update, type, , dword
[WwanMbimEnable]
HKR, Ndi\Params\WwanMbimEnable, ParamDesc, , %WwanMbimEnable%
HKR, Ndi\Params\WwanMbimEnable, Default, , "0"
HKR, Ndi\Params\WwanMbimEnable, type, , dword
[NcmReinitializeEnable]
HKR, Ndi\Params\NcmReinitializeEnable, ParamDesc, , %NcmReinitializeEnable%
HKR, Ndi\Params\NcmReinitializeEnable, Default, , "1"
HKR, Ndi\Params\NcmReinitializeEnable, type, , dword
;-----------------------------------------------------------------------------
; DestinationDirs
;
[DestinationDirs]
ew_wwanecm.CopyFiles = 12
[ew_wwanecm.CopyFiles]
ew_wwanecm.sys,,,0x6 ;COPYFLG_NOSKIP | COPYFLG_NOVERSIONCHECK
;-----------------------------------------------------------------------------
; Driver and Service Section
;
[ew_wwanecm.Service]
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_DEMAND_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\ew_wwanecm.sys
LoadOrderGroup = NDIS
AddReg = ew_wwanecm.Service.Reg
[ew_wwanecm.Service.Reg]
HKR, , TextModeFlags, 0x00010001, 0x0001
HKR, Parameters, DebugLevel, 0x00010001, 1
HKR, Parameters, WwanLogoTestOn, 0x00010001, 0
[ew_wwanecm.EventLog]
AddReg = ew_wwanecm.AddEventLog.Reg
[ew_wwanecm.AddEventLog.Reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
;-----------------------------------------------------------------------------
; Localizable Strings
;
[Strings]
Mfg = "HUAWEI"
HUAWEI_NDISDeviceDesc = "HUAWEI Mobile Connect - Network Adapter"
;PNP2.1 Device descriptor
PNP21_HW_3G_NetworkDesc = "HUAWEI Mobile Connect - 3G Network Card"
PNP21_HW_NetworkDesc = "HUAWEI Mobile Connect - Network Card"
PNP21_NetworkDesc = "Mobile Connect - Network Card"
PNP21_VDF_NetworkDesc = "Vodafone Mobile Broadband Network Adapter (Huawei)"
ew_wwanecm.DiskName = "DriverCore Installation Disk"
Promiscuous = "Set the physical NIC to promiscuous mode"
Promiscuous_Disable = "Disable"
ServiceName = "hwusb_wwanecm"
Promiscuous_Enable = "Enable"
FrameType = "Frame Type in driver-device communications"
FrameType_Ethernet = "Ethernet"
FrameType_IP = "IP"
IsNtb32 = "32bit mode"
NTBInputSize = "NTB input size"
PacketsAccumulationTimeout = "Packets Accumulation Timeout [usec]"
MaxNumOfDatagramsInNTB = "Maximum number of datagrams in NTB"
FlowControlTimeout = "Flow Control timeout interval in ms"
DisableAccumulationUpdate = "Flag to disable NCM accumulation auto updation"
WwanMbimEnable = "Flag to enable WWAN MBIM function"
NcmReinitializeEnable = "Flag to enable NCM reinitialize after resume"Podpowiesz jak ustawić na sztywno HUAWEI w LUCI?
Port COMxx widoczny w DashBoard jest za każdym wpięciem inny.
W Windows jest OK, więc dlaczego nie lubi się z openwrt?
Znów masz dwa interfejsy dla modemu - Orange i wan. Nie rób tak...
Źle zrozumiałem.
Teraz pojedynczy interfejs.
root@LuCI:~# ifstatus wan
{
"up": false,
"pending": true,
"available": true,
"autostart": true,
"dynamic": false,
"proto": "ncm",
"data": {
},
"errors": [
{
"subsystem": "ncm",
"code": "SETMODE_FAILED"
}
]
}
root@LuCI:~# ifstatus wan_4
Interface wan_4 not found
root@LuCI:~# gcom -d "/dev/ttyUSB0" -s /etc/gcom/getcardinfo.gcom
Manufacturer:
Model: E3372
Revision: 21.315.01.00.143
IMEI: XXXXXXXXXXXXXXX
+GCAP: +CGSM,+DS,+ES
OK
root@LuCI:~# gcom -d "/dev/ttyUSB1" -s /etc/gcom/getcardinfo.gcom
Manufacturer:
Model: E3372
Revision: 21.315.01.00.143
IMEI: XXXXXXXXXXXXXXX
+GCAP: +CGSM,+DS,+ES
OK
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.000000] Linux version 3.18.44 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46943) ) #7 Fri Nov 11 13:59:20 CET 2016
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=bab3a22a, boardp=6aaaa282, parts=a2a2a22b
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] SoC: Atheros AR9132 rev 2
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Zone ranges:
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Movable zone start for each node
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Early memory node ranges
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8038a2b0, node_mem_map 81000000
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.000000] Memory: 28260K/32768K available (2651K kernel code, 146K rwdata, 556K rodata, 220K init, 193K bss, 4508K reserved)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.100000] NET: Registered protocol family 16
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.100000] MIPS: machine is TP-LINK TL-WR1043ND
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.390000] Switched to clocksource MIPS
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.390000] NET: Registered protocol family 2
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.400000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.400000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.410000] TCP: Hash tables configured (established 1024 bind 1024)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.420000] TCP: reno registered
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.420000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.430000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.430000] NET: Registered protocol family 1
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 0.440000] PCI: CLS 0 bytes, default 32
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.440000] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.460000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.470000] msgmni has been set to 55
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.480000] io scheduler noop registered
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.480000] io scheduler deadline registered (default)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.480000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.490000] console [ttyS0] disabled
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.520000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.530000] console [ttyS0] enabled
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.530000] bootconsole [early0] disabled
Thu Jan 4 16:42:21 2018 kern.warn kernel: [ 0.540000] m25p80 spi0.0: found s25sl064p, expected m25p80
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.550000] m25p80 spi0.0: s25sl064p (8192 Kbytes)
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.560000] 5 tp-link partitions found on MTD device spi0.0
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.560000] Creating 5 MTD partitions on "spi0.0":
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.570000] 0x000000000000-0x000000020000 : "u-boot"
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.570000] 0x000000020000-0x000000148600 : "kernel"
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.580000] 0x000000148600-0x0000007f0000 : "rootfs"
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.580000] mtd: device 2 (rootfs) set to be root filesystem
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.590000] 1 squashfs-split partitions found on MTD device rootfs
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.600000] 0x000000670000-0x0000007f0000 : "rootfs_data"
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.600000] 0x0000007f0000-0x000000800000 : "art"
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.610000] 0x000000020000-0x0000007f0000 : "firmware"
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 0.620000] Realtek RTL8366RB ethernet switch driver version 0.2.4
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.730000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.730000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 0.920000] libphy: rtl8366rb: probed
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.240000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.240000] TCP: cubic registered
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.250000] NET: Registered protocol family 17
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.250000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 1.270000] Bridge firewalling registered
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.270000] 8021q: 802.1Q VLAN Support v1.8
Thu Jan 4 16:42:21 2018 kern.err kernel: [ 1.280000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.290000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 1.300000] Freeing unused kernel memory: 220K (803a9000 - 803e0000)
Thu Jan 4 16:42:21 2018 user.info kernel: [ 2.830000] init: Console is alive
Thu Jan 4 16:42:21 2018 user.info kernel: [ 2.840000] init: - watchdog -
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.440000] usbcore: registered new interface driver usbfs
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.450000] usbcore: registered new interface driver hub
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.460000] usbcore: registered new device driver usb
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 5.500000] SCSI subsystem initialized
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.510000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.520000] ehci-platform: EHCI generic platform driver
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.530000] ehci-platform ehci-platform: EHCI Host Controller
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.570000] hub 1-0:1.0: USB hub found
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.580000] hub 1-0:1.0: 1 port detected
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.590000] ohci-platform: OHCI generic platform driver
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 5.600000] usbcore: registered new interface driver usb-storage
Thu Jan 4 16:42:21 2018 user.info kernel: [ 5.850000] init: - preinit -
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 6.640000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 6.640000] eth0: link up (1000Mbps/Full duplex)
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 6.670000] random: procd urandom read with 10 bits of entropy available
Thu Jan 4 16:42:21 2018 user.info kernel: [ 9.960000] mount_root: loading kmods from internal overlay
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 10.260000] jffs2: notice: (384) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.280000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.290000] block: extroot: not configured
Thu Jan 4 16:42:21 2018 kern.notice kernel: [ 10.350000] jffs2: notice: (381) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.370000] mount_root: loading kmods from internal overlay
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.540000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.550000] block: extroot: not configured
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.560000] mount_root: switching to jffs2 overlay
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 10.600000] eth0: link down
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.620000] procd: - early -
Thu Jan 4 16:42:21 2018 user.info kernel: [ 10.620000] procd: - watchdog -
Thu Jan 4 16:42:21 2018 user.info kernel: [ 11.590000] procd: - ubus -
Thu Jan 4 16:42:21 2018 user.info kernel: [ 12.620000] procd: - init -
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.600000] NET: Registered protocol family 10
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.630000] gre: GRE over IPv4 demultiplexor driver
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.640000] ip_gre: GRE over IPv4 tunneling driver
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.650000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.710000] u32 classifier
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.710000] input device check on
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.710000] Actions configured
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.720000] Mirror/redirect action on
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.780000] fuse init (API version 7.23)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.830000] usbcore: registered new interface driver cdc_acm
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.840000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.850000] usbcore: registered new interface driver cdc_wdm
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.860000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.870000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.900000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.930000] usbcore: registered new interface driver usblp
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.960000] usbcore: registered new interface driver usbserial
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.960000] usbcore: registered new interface driver usbserial_generic
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 15.970000] usbserial: USB Serial support registered for generic
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.030000] xt_time: kernel timezone is -0000
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.040000] usbcore: registered new interface driver cdc_ether
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.050000] usbcore: registered new interface driver cdc_ncm
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.140000] usbcore: registered new interface driver huawei_cdc_ncm
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.260000] PPP generic driver version 2.4.2
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.270000] PPP MPPE Compression module registered
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.280000] NET: Registered protocol family 24
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.280000] PPTP driver version 0.8.5
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.290000] usbcore: registered new interface driver qmi_wwan
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.300000] usbcore: registered new interface driver rndis_host
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.320000] usbcore: registered new interface driver sierra
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.320000] usbserial: USB Serial support registered for Sierra USB modem
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.340000] usbcore: registered new interface driver sierra_net
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.410000] usbcore: registered new interface driver cdc_mbim
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.430000] usbcore: registered new interface driver option
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.440000] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.470000] usbcore: registered new interface driver qcserial
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.470000] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.530000] ath: EEPROM regdomain: 0x0
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.530000] ath: EEPROM indicates default country code should be used
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.530000] ath: doing EEPROM country->regdmn map search
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.530000] ath: country maps to regdmn code: 0x3a
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.530000] ath: Country alpha2 being used: US
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.530000] ath: Regpair used: 0x3a
Thu Jan 4 16:42:21 2018 kern.debug kernel: [ 16.550000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Jan 4 16:42:21 2018 kern.info kernel: [ 16.560000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Thu Jan 4 16:42:26 2018 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Thu Jan 4 16:42:26 2018 daemon.err block: /dev/mtdblock3 is already mounted
Thu Jan 4 16:42:26 2018 cron.info crond[1254]: crond (busybox 1.23.2) started, log level 8
Thu Jan 4 16:42:29 2018 kern.debug kernel: [ 26.830000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Jan 4 16:42:29 2018 kern.info kernel: [ 26.840000] eth0: link up (1000Mbps/Full duplex)
Thu Jan 4 16:42:29 2018 kern.info kernel: [ 26.860000] device eth0.1 entered promiscuous mode
Thu Jan 4 16:42:29 2018 kern.info kernel: [ 26.860000] device eth0 entered promiscuous mode
Thu Jan 4 16:42:29 2018 kern.info kernel: [ 26.880000] br-lan: port 1(eth0.1) entered forwarding state
Thu Jan 4 16:42:29 2018 kern.info kernel: [ 26.880000] br-lan: port 1(eth0.1) entered forwarding state
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'lan' is enabled
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'lan' is now up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jan 4 16:42:29 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Jan 4 16:42:29 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Jan 4 16:42:29 2018 daemon.warn odhcpd[1223]: DHCPV6 SOLICIT IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 16:42:29 2018 daemon.warn odhcpd[1223]: DHCPV6 SOLICIT IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 16:42:30 2018 daemon.notice netifd: wan (1313): Control device not valid
Thu Jan 4 16:42:30 2018 daemon.notice netifd: wan (1350): Stopping network
Thu Jan 4 16:42:31 2018 daemon.warn odhcpd[1223]: DHCPV6 SOLICIT IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 16:42:31 2018 daemon.warn odhcpd[1223]: DHCPV6 REQUEST IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 16:42:31 2018 kern.info kernel: [ 28.880000] br-lan: port 1(eth0.1) entered forwarding state
Thu Jan 4 16:42:32 2018 daemon.notice netifd: wan (1350): Can't open device /dev/ttyUSB0.
Thu Jan 4 16:42:32 2018 daemon.notice netifd: wan (1350): Failed to disconnect
Thu Jan 4 16:42:32 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:42:32 2018 authpriv.info dropbear[1387]: Not backgrounding
Thu Jan 4 16:42:34 2018 daemon.notice netifd: radio0 (1315): Configuration file: /var/run/hostapd-phy0.conf
Thu Jan 4 16:42:34 2018 kern.info kernel: [ 31.820000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Jan 4 16:42:34 2018 kern.info kernel: [ 31.970000] device wlan0 entered promiscuous mode
Thu Jan 4 16:42:34 2018 daemon.notice netifd: radio0 (1315): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Jan 4 16:42:34 2018 daemon.notice netifd: radio0 (1315): Using interface wlan0 with hwaddr XXXX:XXXX:XXXX and ssid "LU1043"
Thu Jan 4 16:42:35 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jan 4 16:42:37 2018 daemon.notice netifd: radio0 (1315): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Jan 4 16:42:37 2018 daemon.notice netifd: radio0 (1315): wlan0: AP-ENABLED
Thu Jan 4 16:42:38 2018 kern.info kernel: [ 35.310000] br-lan: port 2(wlan0) entered forwarding state
Thu Jan 4 16:42:38 2018 kern.info kernel: [ 35.320000] br-lan: port 2(wlan0) entered forwarding state
Thu Jan 4 16:42:38 2018 kern.info kernel: [ 35.320000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Jan 4 16:42:38 2018 daemon.notice netifd: Network device 'wlan0' link is up
Thu Jan 4 16:42:40 2018 kern.info kernel: [ 37.320000] br-lan: port 2(wlan0) entered forwarding state
Thu Jan 4 16:42:42 2018 user.emerg syslog: setting up led USB
Thu Jan 4 16:42:42 2018 user.emerg syslog: setting up led WLAN
Thu Jan 4 16:42:43 2018 daemon.info procd: - init complete -
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq[2080]: started, version 2.73 cachesize 150
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq[2080]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq[2080]: DNS service limited to local subnets
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq-dhcp[2080]: DHCP, static leases only on 192.168.48.100, lease time 12h
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq[2080]: using local addresses only for domain lan
Thu Jan 4 16:42:44 2018 daemon.warn dnsmasq[2080]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq[2080]: read /etc/hosts - 33 addresses
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq[2080]: read /tmp/hosts/dhcp - 1 addresses
Thu Jan 4 16:42:44 2018 daemon.info dnsmasq-dhcp[2080]: read /etc/ethers - 0 addresses
Thu Jan 4 16:42:59 2018 daemon.info dnsmasq-dhcp[2080]: DHCPREQUEST(br-lan) 192.168.48.180 94:de:80:a5:99:06
Thu Jan 4 16:42:59 2018 daemon.info dnsmasq-dhcp[2080]: DHCPACK(br-lan) 192.168.48.180 94:de:80:a5:99:06 dzisiaj
Thu Jan 4 16:43:00 2018 kern.notice kernel: [ 57.990000] random: nonblocking pool is initialized
Thu Jan 4 16:43:19 2018 kern.info kernel: [ 76.760000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Jan 4 16:43:19 2018 kern.info kernel: [ 77.130000] usb-storage 1-1:1.0: USB Mass Storage device detected
Thu Jan 4 16:43:19 2018 kern.info kernel: [ 77.150000] scsi host0: usb-storage 1-1:1.0
Thu Jan 4 16:43:20 2018 kern.info kernel: [ 78.010000] usb 1-1: USB disconnect, device number 2
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 78.760000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.010000] option 1-1:1.0: GSM modem (1-port) converter detected
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.020000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.030000] option 1-1:1.1: GSM modem (1-port) converter detected
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.040000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.150000] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.160000] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.180000] huawei_cdc_ncm 1-1:1.2: NDP will be placed at end of frame for this device.
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.190000] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.200000] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.230000] usb-storage 1-1:1.3: USB Mass Storage device detected
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.230000] scsi host1: usb-storage 1-1:1.3
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.260000] usb-storage 1-1:1.4: USB Mass Storage device detected
Thu Jan 4 16:43:21 2018 kern.info kernel: [ 79.260000] scsi host2: usb-storage 1-1:1.4
Thu Jan 4 16:43:22 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:43:22 2018 kern.notice kernel: [ 80.240000] scsi 1:0:0:0: CD-ROM Mass storage ffff PQ: 0 ANSI: 2
Thu Jan 4 16:43:22 2018 kern.notice kernel: [ 80.270000] scsi 2:0:0:0: Direct-Access TF CARD storage ffff PQ: 0 ANSI: 2
Thu Jan 4 16:43:23 2018 kern.notice kernel: [ 80.290000] sd 2:0:0:0: [sda] Attached SCSI removable disk
Thu Jan 4 16:43:24 2018 daemon.notice netifd: wan (2328): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:43:24 2018 daemon.err block: Unkown action change
Thu Jan 4 16:43:24 2018 daemon.err block: Unkown action change
Thu Jan 4 16:43:25 2018 daemon.notice netifd: wan (2328): sending ->
Thu Jan 4 16:43:35 2018 authpriv.info dropbear[2500]: Child connection from 192.168.48.180:53051
Thu Jan 4 16:43:40 2018 daemon.notice netifd: wan (2328): Timeout running AT-command
Thu Jan 4 16:43:40 2018 daemon.notice netifd: wan (2328): Failed to set operating mode
Thu Jan 4 16:43:40 2018 daemon.notice netifd: wan (2561): Stopping network
Thu Jan 4 16:43:42 2018 daemon.notice netifd: wan (2561): sending ->
Thu Jan 4 16:43:45 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:43:45 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:43:47 2018 daemon.notice netifd: wan (2620): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:43:47 2018 daemon.notice netifd: wan (2620): sending ->
Thu Jan 4 16:43:49 2018 authpriv.notice dropbear[2500]: Password auth succeeded for 'root' from 192.168.48.180:53051
Thu Jan 4 16:44:02 2018 daemon.notice netifd: wan (2620): Timeout running AT-command
Thu Jan 4 16:44:02 2018 daemon.notice netifd: wan (2620): Failed to set operating mode
Thu Jan 4 16:44:02 2018 daemon.notice netifd: wan (2866): Stopping network
Thu Jan 4 16:44:05 2018 daemon.notice netifd: wan (2866): sending ->
Thu Jan 4 16:44:07 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:44:07 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:44:09 2018 daemon.notice netifd: wan (2924): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:44:10 2018 daemon.notice netifd: wan (2924): sending ->
Thu Jan 4 16:44:25 2018 daemon.notice netifd: wan (2924): Timeout running AT-command
Thu Jan 4 16:44:25 2018 daemon.notice netifd: wan (2924): Failed to set operating mode
Thu Jan 4 16:44:25 2018 daemon.notice netifd: wan (3137): Stopping network
Thu Jan 4 16:44:27 2018 daemon.notice netifd: wan (3137): sending ->
Thu Jan 4 16:44:30 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:44:30 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:44:32 2018 daemon.notice netifd: wan (3194): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:44:32 2018 daemon.notice netifd: wan (3194): sending ->
Thu Jan 4 16:44:47 2018 daemon.notice netifd: wan (3194): Timeout running AT-command
Thu Jan 4 16:44:47 2018 daemon.notice netifd: wan (3194): Failed to set operating mode
Thu Jan 4 16:44:47 2018 daemon.notice netifd: wan (3365): Stopping network
Thu Jan 4 16:44:50 2018 daemon.notice netifd: wan (3365): sending ->
Thu Jan 4 16:44:52 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:44:52 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:44:54 2018 daemon.notice netifd: wan (3422): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:44:55 2018 daemon.notice netifd: wan (3422): sending ->
Thu Jan 4 16:45:10 2018 daemon.notice netifd: wan (3422): Timeout running AT-command
Thu Jan 4 16:45:10 2018 daemon.notice netifd: wan (3422): Failed to set operating mode
Thu Jan 4 16:45:10 2018 daemon.notice netifd: wan (3549): Stopping network
Thu Jan 4 16:45:12 2018 daemon.notice netifd: wan (3549): sending ->
Thu Jan 4 16:45:15 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:45:15 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:45:16 2018 daemon.notice netifd: wan (3563): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:45:17 2018 daemon.notice netifd: wan (3563): sending ->
Thu Jan 4 16:45:32 2018 daemon.notice netifd: wan (3563): Timeout running AT-command
Thu Jan 4 16:45:32 2018 daemon.notice netifd: wan (3563): Failed to set operating mode
Thu Jan 4 16:45:32 2018 daemon.notice netifd: wan (3594): Stopping network
Thu Jan 4 16:45:34 2018 daemon.notice netifd: wan (3594): sending ->
Thu Jan 4 16:45:37 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:45:37 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:45:39 2018 daemon.notice netifd: wan (3605): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:45:39 2018 daemon.notice netifd: wan (3605): sending ->
Thu Jan 4 16:45:54 2018 daemon.notice netifd: wan (3605): Timeout running AT-command
Thu Jan 4 16:45:54 2018 daemon.notice netifd: wan (3605): Failed to set operating mode
Thu Jan 4 16:45:54 2018 daemon.notice netifd: wan (3632): Stopping network
Thu Jan 4 16:45:57 2018 daemon.notice netifd: wan (3632): sending ->
Thu Jan 4 16:45:57 2018 daemon.notice netifd: wan (3632): Command failed: Permission denied
Thu Jan 4 16:45:57 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:45:57 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:45:59 2018 daemon.notice netifd: wan (3647): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:46:00 2018 daemon.notice netifd: wan (3647): sending ->
Thu Jan 4 16:46:15 2018 daemon.notice netifd: wan (3647): Timeout running AT-command
Thu Jan 4 16:46:15 2018 daemon.notice netifd: wan (3647): Failed to set operating mode
Thu Jan 4 16:46:15 2018 daemon.notice netifd: wan (3674): Stopping network
Thu Jan 4 16:46:17 2018 daemon.notice netifd: wan (3674): sending ->
Thu Jan 4 16:46:20 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:46:20 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:46:21 2018 daemon.notice netifd: wan (3685): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:46:22 2018 daemon.notice netifd: wan (3685): sending ->
Thu Jan 4 16:46:37 2018 daemon.notice netifd: wan (3685): Timeout running AT-command
Thu Jan 4 16:46:37 2018 daemon.notice netifd: wan (3685): Failed to set operating mode
Thu Jan 4 16:46:37 2018 daemon.notice netifd: wan (3714): Stopping network
Thu Jan 4 16:46:39 2018 daemon.notice netifd: wan (3714): sending ->
Thu Jan 4 16:46:42 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:46:42 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:46:44 2018 daemon.notice netifd: wan (3726): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:46:44 2018 daemon.notice netifd: wan (3726): sending ->
Thu Jan 4 16:46:59 2018 daemon.notice netifd: wan (3726): Timeout running AT-command
Thu Jan 4 16:46:59 2018 daemon.notice netifd: wan (3726): Failed to set operating mode
Thu Jan 4 16:46:59 2018 daemon.notice netifd: wan (3752): Stopping network
Thu Jan 4 16:47:02 2018 daemon.notice netifd: wan (3752): sending ->
Thu Jan 4 16:47:04 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:47:04 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:47:06 2018 daemon.notice netifd: wan (3763): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:47:07 2018 daemon.notice netifd: wan (3763): sending ->
Thu Jan 4 16:47:22 2018 daemon.notice netifd: wan (3763): Timeout running AT-command
Thu Jan 4 16:47:22 2018 daemon.notice netifd: wan (3763): Failed to set operating mode
Thu Jan 4 16:47:22 2018 daemon.notice netifd: wan (3792): Stopping network
Thu Jan 4 16:47:24 2018 daemon.notice netifd: wan (3792): sending ->
Thu Jan 4 16:47:27 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 16:47:27 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 16:47:29 2018 daemon.notice netifd: wan (3803): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 16:47:29 2018 daemon.notice netifd: wan (3803): sending -> Dodałem interfejs Orange.
--skasowane, bo zbędne---
Więc dlaczego 21.200.07.00.209_M_02 łączy z internetem, a 21.315.01.00.143_M_U_01.01 nie łączy?
Dlatego w innym wątku pytałem o identyfikacje modemu
Chętnie pójdę na współpracę, bo wolałbym, aby modem działał na nowszym firmware (21.315.01.00.143_M_U_01.01) i przedstawiał się jako E3372 niż na starszym (21.200.07.00.209_M_02), gdzie jest widoczny jako MegaFon M150-2.
network.PLAY=interface
network.PLAY.proto='3g'
network.PLAY.device='/dev/ttyUSB0'
network.PLAY.service='umts'
network.PLAY.apn='internet'
network.PLAY.ipv6='auto'Dla Play (E3272s-153) miałem 3g a nie ncm.
Z twojego podadnika wynika, że ncm może być dla E3272s-153, E3372s-153 i E3372h-153.
W nocy sprawdzę, czy działa dla obu modemów jedno ustawienie wan.
Bardzo Ci dziękuję za wsparcie. Jesteś niezastąpiony i niesamowicie uczynny. Pomyślnego Nowego Roku!
1. czy masz zainstalowany comgt-ncm?
2. Zmień interfejs na /dev/ttyUSB1 lub /dev/cdc-wdm0 i ponownie: reboot i pokaż w/w polecenia.EDIT: wykonaj jeszcze
gcom -d "/dev/ttyUSB0" -s /etc/gcom/getcardinfo.gcom gcom -d "/dev/ttyUSB1" -s /etc/gcom/getcardinfo.gcomI też pokaż co wyszło.
Dziwne. Po usunięciu interfejsów PLAY i ORANGE, wypięciu modemu i podłączeniu do Windows na czas naszej komunikacji na forum, a następnie po podączeniu do routera, wreszcie modem odpalił.
Czy problem był w konflikcie dwóch interfejsó opartych na wan, czy zakłócenia przez interfejs PLAY?
PLAY jest mi potrzebny, bo zamiennie wkładam modem E3272s-153 (PLAY) w trybie nocnym i E3372h-153 (ORANGE) w trybie dziennym.
Tylko dla porządku:
root@LuCI:~# opkg list-installed |grep comgt
comgt - 0.32-25
comgt-directip - 0.32-25
comgt-ncm - 0.32-25
root@LuCI:~# ifstatus wan
{
"up": true,
"pending": false,
"available": true,
"autostart": true,
"dynamic": false,
"uptime": 241,
"l3_device": "wwan0",
"proto": "ncm",
"metric": 0,
"delegation": false,
"ipv4-address": [
],
"ipv6-address": [
],
"ipv6-prefix": [
],
"ipv6-prefix-assignment": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
],
"inactive": {
"ipv4-address": [
],
"ipv6-address": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
]
},
"data": {
}
}
root@LuCI:~# ifstatus wan
{
"up": true,
"pending": false,
"available": true,
"autostart": true,
"dynamic": false,
"uptime": 273,
"l3_device": "wwan0",
"proto": "ncm",
"metric": 0,
"delegation": false,
"ipv4-address": [
],
"ipv6-address": [
],
"ipv6-prefix": [
],
"ipv6-prefix-assignment": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
],
"inactive": {
"ipv4-address": [
],
"ipv6-address": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
]
},
"data": {
}
}
root@LuCI:~#
root@LuCI:~# gcom -d "/dev/ttyUSB0" -s /etc/gcom/getcardinfo.gcom
ATI
Manufacturer: huawei
Model: MegaFon M150-2
Revision: 21.200.07.00.209
IMEI: XXXXXXXXXXXXXXX
+GCAP: +CGSM,+DS,+ES
OK
root@LuCI:~# gcom -d "/dev/ttyUSB1" -s /etc/gcom/getcardinfo.gcom
ATI
Manufacturer: huawei
Model: MegaFon M150-2
Revision: 21.200.07.00.209
IMEI: XXXXXXXXXXXXXXX
+GCAP: +CGSM,+DS,+ES
OKMasz i PLAY i wan i ORANGE. Usuń dwa i zostaw jedno samo wan. Druga sprawa - usuń opcję mode oraz ipv6. zakładam że pin faktycznie masz 1234 (bo jak nie to już zablokowałeś kartę). Zrestartuj router, poczekaj ze 3 minuty i pokaż wynik poleceń:
logread
ifstatus wan
ifstatus wan_4
Pin nie zablokował karty. Modem w Windows działa bez zająknięcia.
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.000000] Linux version 3.18.44 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46943) ) #7 Fri Nov 11 13:59:20 CET 2016
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=bab3a22a, boardp=6aaaa282, parts=a2a2a22b
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] SoC: Atheros AR9132 rev 2
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Zone ranges:
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Movable zone start for each node
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Early memory node ranges
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8038a2b0, node_mem_map 81000000
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.000000] Memory: 28260K/32768K available (2651K kernel code, 146K rwdata, 556K rodata, 220K init, 193K bss, 4508K reserved)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.100000] NET: Registered protocol family 16
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.100000] MIPS: machine is TP-LINK TL-WR1043ND
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.390000] Switched to clocksource MIPS
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.390000] NET: Registered protocol family 2
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.400000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.400000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.410000] TCP: Hash tables configured (established 1024 bind 1024)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.420000] TCP: reno registered
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.420000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.430000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.430000] NET: Registered protocol family 1
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 0.440000] PCI: CLS 0 bytes, default 32
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.440000] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.460000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.470000] msgmni has been set to 55
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.480000] io scheduler noop registered
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.480000] io scheduler deadline registered (default)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.480000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.490000] console [ttyS0] disabled
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.520000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.530000] console [ttyS0] enabled
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.530000] bootconsole [early0] disabled
Thu Jan 4 13:39:15 2018 kern.warn kernel: [ 0.540000] m25p80 spi0.0: found s25sl064p, expected m25p80
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.550000] m25p80 spi0.0: s25sl064p (8192 Kbytes)
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.560000] 5 tp-link partitions found on MTD device spi0.0
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.560000] Creating 5 MTD partitions on "spi0.0":
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.570000] 0x000000000000-0x000000020000 : "u-boot"
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.570000] 0x000000020000-0x000000148600 : "kernel"
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.580000] 0x000000148600-0x0000007f0000 : "rootfs"
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.580000] mtd: device 2 (rootfs) set to be root filesystem
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.590000] 1 squashfs-split partitions found on MTD device rootfs
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.600000] 0x000000670000-0x0000007f0000 : "rootfs_data"
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.600000] 0x0000007f0000-0x000000800000 : "art"
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.610000] 0x000000020000-0x0000007f0000 : "firmware"
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 0.620000] Realtek RTL8366RB ethernet switch driver version 0.2.4
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.730000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.730000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 0.920000] libphy: rtl8366rb: probed
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.240000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.240000] TCP: cubic registered
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.250000] NET: Registered protocol family 17
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.250000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 1.270000] Bridge firewalling registered
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.270000] 8021q: 802.1Q VLAN Support v1.8
Thu Jan 4 13:39:15 2018 kern.err kernel: [ 1.280000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.290000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 1.300000] Freeing unused kernel memory: 220K (803a9000 - 803e0000)
Thu Jan 4 13:39:15 2018 user.info kernel: [ 2.830000] init: Console is alive
Thu Jan 4 13:39:15 2018 user.info kernel: [ 2.840000] init: - watchdog -
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.440000] usbcore: registered new interface driver usbfs
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.450000] usbcore: registered new interface driver hub
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.460000] usbcore: registered new device driver usb
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 5.500000] SCSI subsystem initialized
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.510000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.520000] ehci-platform: EHCI generic platform driver
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.530000] ehci-platform ehci-platform: EHCI Host Controller
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.570000] hub 1-0:1.0: USB hub found
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.580000] hub 1-0:1.0: 1 port detected
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.590000] ohci-platform: OHCI generic platform driver
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.600000] usbcore: registered new interface driver usb-storage
Thu Jan 4 13:39:15 2018 user.info kernel: [ 5.850000] init: - preinit -
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 5.940000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 6.460000] random: procd urandom read with 10 bits of entropy available
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 6.530000] usb-storage 1-1:1.3: USB Mass Storage device detected
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 6.550000] scsi host0: usb-storage 1-1:1.3
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 6.560000] usb-storage 1-1:1.4: USB Mass Storage device detected
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 6.570000] scsi host1: usb-storage 1-1:1.4
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 6.690000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 6.690000] eth0: link up (1000Mbps/Full duplex)
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 7.560000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 7.580000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 7.590000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Thu Jan 4 13:39:15 2018 user.info kernel: [ 9.990000] mount_root: loading kmods from internal overlay
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 10.290000] jffs2: notice: (413) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.310000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.330000] block: extroot: not configured
Thu Jan 4 13:39:15 2018 kern.notice kernel: [ 10.390000] jffs2: notice: (410) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.410000] mount_root: loading kmods from internal overlay
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.580000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.600000] block: extroot: not configured
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.600000] mount_root: switching to jffs2 overlay
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 10.650000] eth0: link down
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.660000] procd: - early -
Thu Jan 4 13:39:15 2018 user.info kernel: [ 10.670000] procd: - watchdog -
Thu Jan 4 13:39:15 2018 user.info kernel: [ 11.700000] procd: - ubus -
Thu Jan 4 13:39:15 2018 user.info kernel: [ 12.730000] procd: - init -
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.740000] NET: Registered protocol family 10
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.790000] gre: GRE over IPv4 demultiplexor driver
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.800000] ip_gre: GRE over IPv4 tunneling driver
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.820000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.890000] u32 classifier
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.890000] input device check on
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.890000] Actions configured
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.900000] Mirror/redirect action on
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.970000] fuse init (API version 7.23)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 15.990000] usbcore: registered new interface driver cdc_acm
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.000000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.010000] usbcore: registered new interface driver cdc_wdm
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.020000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.030000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.040000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.080000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.130000] usbcore: registered new interface driver usblp
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.150000] usbcore: registered new interface driver usbserial
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.160000] usbcore: registered new interface driver usbserial_generic
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.160000] usbserial: USB Serial support registered for generic
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.240000] xt_time: kernel timezone is -0000
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.250000] usbcore: registered new interface driver cdc_ether
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.260000] usbcore: registered new interface driver cdc_ncm
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.400000] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.410000] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.420000] huawei_cdc_ncm 1-1:1.2: NDP will be placed at end of frame for this device.
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.430000] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.440000] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.450000] usbcore: registered new interface driver huawei_cdc_ncm
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.560000] PPP generic driver version 2.4.2
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.570000] PPP MPPE Compression module registered
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.570000] NET: Registered protocol family 24
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.580000] PPTP driver version 0.8.5
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.600000] usbcore: registered new interface driver qmi_wwan
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.610000] usbcore: registered new interface driver rndis_host
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.630000] usbcore: registered new interface driver sierra
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.630000] usbserial: USB Serial support registered for Sierra USB modem
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.640000] usbcore: registered new interface driver sierra_net
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.730000] usbcore: registered new interface driver cdc_mbim
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.740000] usbcore: registered new interface driver option
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.740000] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.750000] option 1-1:1.0: GSM modem (1-port) converter detected
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.760000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.770000] option 1-1:1.1: GSM modem (1-port) converter detected
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.770000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.790000] usbcore: registered new interface driver qcserial
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.790000] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.840000] ath: EEPROM regdomain: 0x0
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.840000] ath: EEPROM indicates default country code should be used
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.840000] ath: doing EEPROM country->regdmn map search
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.840000] ath: country maps to regdmn code: 0x3a
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.840000] ath: Country alpha2 being used: US
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.840000] ath: Regpair used: 0x3a
Thu Jan 4 13:39:15 2018 kern.debug kernel: [ 16.860000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Jan 4 13:39:15 2018 kern.info kernel: [ 16.870000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Thu Jan 4 13:39:19 2018 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Thu Jan 4 13:39:20 2018 daemon.err block: /dev/mtdblock3 is already mounted
Thu Jan 4 13:39:20 2018 cron.info crond[1365]: crond (busybox 1.23.2) started, log level 8
Thu Jan 4 13:39:22 2018 kern.debug kernel: [ 27.150000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Jan 4 13:39:22 2018 kern.info kernel: [ 27.150000] eth0: link up (1000Mbps/Full duplex)
Thu Jan 4 13:39:22 2018 kern.info kernel: [ 27.160000] device eth0.1 entered promiscuous mode
Thu Jan 4 13:39:22 2018 kern.info kernel: [ 27.170000] device eth0 entered promiscuous mode
Thu Jan 4 13:39:22 2018 kern.info kernel: [ 27.180000] br-lan: port 1(eth0.1) entered forwarding state
Thu Jan 4 13:39:22 2018 kern.info kernel: [ 27.180000] br-lan: port 1(eth0.1) entered forwarding state
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'lan' is enabled
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'lan' is now up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jan 4 13:39:22 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Jan 4 13:39:22 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Jan 4 13:39:23 2018 daemon.warn odhcpd[1319]: DHCPV6 SOLICIT IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 13:39:24 2018 daemon.warn odhcpd[1319]: DHCPV6 SOLICIT IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 13:39:24 2018 daemon.warn odhcpd[1319]: DHCPV6 REQUEST IA_NA from 000100011a1057e194de80a59906 on br-lan: ok XXXX:XXXX:XXXX::180/128
Thu Jan 4 13:39:24 2018 kern.info kernel: [ 29.180000] br-lan: port 1(eth0.1) entered forwarding state
Thu Jan 4 13:39:25 2018 authpriv.info dropbear[1484]: Not backgrounding
Thu Jan 4 13:39:27 2018 daemon.notice netifd: wan (1410): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:39:28 2018 daemon.notice netifd: radio0 (1412): Configuration file: /var/run/hostapd-phy0.conf
Thu Jan 4 13:39:28 2018 kern.info kernel: [ 32.430000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Jan 4 13:39:28 2018 daemon.notice netifd: wan (1410): sending ->
Thu Jan 4 13:39:28 2018 daemon.notice netifd: radio0 (1412): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Jan 4 13:39:28 2018 kern.info kernel: [ 32.530000] device wlan0 entered promiscuous mode
Thu Jan 4 13:39:28 2018 daemon.notice netifd: radio0 (1412): Using interface wlan0 with hwaddr b0:48:7a:d2:fc:82 and ssid "LU1043"
Thu Jan 4 13:39:28 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jan 4 13:39:31 2018 daemon.notice netifd: radio0 (1412): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Jan 4 13:39:31 2018 daemon.notice netifd: radio0 (1412): wlan0: AP-ENABLED
Thu Jan 4 13:39:31 2018 kern.info kernel: [ 36.040000] br-lan: port 2(wlan0) entered forwarding state
Thu Jan 4 13:39:31 2018 kern.info kernel: [ 36.040000] br-lan: port 2(wlan0) entered forwarding state
Thu Jan 4 13:39:31 2018 kern.info kernel: [ 36.050000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Jan 4 13:39:32 2018 daemon.notice netifd: Network device 'wlan0' link is up
Thu Jan 4 13:39:33 2018 kern.info kernel: [ 38.040000] br-lan: port 2(wlan0) entered forwarding state
Thu Jan 4 13:39:35 2018 user.emerg syslog: setting up led USB
Thu Jan 4 13:39:35 2018 user.emerg syslog: setting up led WLAN
Thu Jan 4 13:39:35 2018 daemon.info procd: - init complete -
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq[2180]: started, version 2.73 cachesize 150
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq[2180]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq[2180]: DNS service limited to local subnets
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq-dhcp[2180]: DHCP, static leases only on 192.168.48.100, lease time 12h
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq[2180]: using local addresses only for domain lan
Thu Jan 4 13:39:37 2018 daemon.warn dnsmasq[2180]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq[2180]: read /etc/hosts - 33 addresses
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq[2180]: read /tmp/hosts/dhcp - 1 addresses
Thu Jan 4 13:39:37 2018 daemon.info dnsmasq-dhcp[2180]: read /etc/ethers - 0 addresses
Thu Jan 4 13:39:43 2018 daemon.notice netifd: wan (1410): Timeout running AT-command
Thu Jan 4 13:39:43 2018 daemon.notice netifd: wan (1410): Failed to set operating mode
Thu Jan 4 13:39:43 2018 daemon.notice netifd: wan (2303): Stopping network
Thu Jan 4 13:39:45 2018 kern.notice kernel: [ 49.670000] random: nonblocking pool is initialized
Thu Jan 4 13:39:45 2018 daemon.notice netifd: wan (2303): sending ->
Thu Jan 4 13:39:48 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:39:48 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:39:50 2018 daemon.notice netifd: wan (2313): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:39:50 2018 daemon.notice netifd: wan (2313): sending ->
Thu Jan 4 13:39:53 2018 daemon.info dnsmasq-dhcp[2180]: DHCPREQUEST(br-lan) 192.168.48.180 XXXX:XXXX:XXXX
Thu Jan 4 13:39:53 2018 daemon.info dnsmasq-dhcp[2180]: DHCPACK(br-lan) 192.168.48.180 XXXX:XXXX:XXXX XXXXXXX
Thu Jan 4 13:39:55 2018 authpriv.info dropbear[2327]: Child connection from 192.168.48.180:50513
Thu Jan 4 13:40:05 2018 authpriv.notice dropbear[2327]: Password auth succeeded for 'root' from 192.168.48.180:50513
Thu Jan 4 13:40:05 2018 daemon.notice netifd: wan (2313): Timeout running AT-command
Thu Jan 4 13:40:05 2018 daemon.notice netifd: wan (2313): Failed to set operating mode
Thu Jan 4 13:40:06 2018 daemon.notice netifd: wan (2401): Stopping network
Thu Jan 4 13:40:08 2018 daemon.notice netifd: wan (2401): sending ->
Thu Jan 4 13:40:10 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:40:10 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:40:12 2018 daemon.notice netifd: wan (2421): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:40:13 2018 daemon.notice netifd: wan (2421): sending ->
Thu Jan 4 13:40:28 2018 daemon.notice netifd: wan (2421): Timeout running AT-command
Thu Jan 4 13:40:28 2018 daemon.notice netifd: wan (2421): Failed to set operating mode
Thu Jan 4 13:40:28 2018 daemon.notice netifd: wan (2439): Stopping network
Thu Jan 4 13:40:30 2018 daemon.notice netifd: wan (2439): sending ->
Thu Jan 4 13:40:33 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:40:33 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:40:35 2018 daemon.notice netifd: wan (2447): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:40:35 2018 daemon.notice netifd: wan (2447): sending ->
Thu Jan 4 13:40:50 2018 daemon.notice netifd: wan (2447): Timeout running AT-command
Thu Jan 4 13:40:50 2018 daemon.notice netifd: wan (2447): Failed to set operating mode
Thu Jan 4 13:40:50 2018 daemon.notice netifd: wan (2468): Stopping network
Thu Jan 4 13:40:53 2018 daemon.notice netifd: wan (2468): sending ->
Thu Jan 4 13:40:55 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:40:55 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:40:57 2018 daemon.notice netifd: wan (2478): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:40:58 2018 daemon.notice netifd: wan (2478): sending ->
Thu Jan 4 13:41:13 2018 daemon.notice netifd: wan (2478): Timeout running AT-command
Thu Jan 4 13:41:13 2018 daemon.notice netifd: wan (2478): Failed to set operating mode
Thu Jan 4 13:41:13 2018 daemon.notice netifd: wan (2495): Stopping network
Thu Jan 4 13:41:15 2018 daemon.notice netifd: wan (2495): sending ->
Thu Jan 4 13:41:18 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:41:18 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:41:20 2018 daemon.notice netifd: wan (2503): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:41:20 2018 daemon.notice netifd: wan (2503): sending ->
Thu Jan 4 13:41:35 2018 daemon.notice netifd: wan (2503): Timeout running AT-command
Thu Jan 4 13:41:35 2018 daemon.notice netifd: wan (2503): Failed to set operating mode
Thu Jan 4 13:41:35 2018 daemon.notice netifd: wan (2521): Stopping network
Thu Jan 4 13:41:37 2018 daemon.notice netifd: wan (2521): sending ->
Thu Jan 4 13:41:40 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:41:40 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:41:42 2018 daemon.notice netifd: wan (2529): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:41:43 2018 daemon.notice netifd: wan (2529): sending ->
Thu Jan 4 13:41:55 2018 authpriv.info dropbear[2327]: Exit (root): Exited normally
Thu Jan 4 13:41:58 2018 daemon.notice netifd: wan (2529): Timeout running AT-command
Thu Jan 4 13:41:58 2018 daemon.notice netifd: wan (2529): Failed to set operating mode
Thu Jan 4 13:41:58 2018 daemon.notice netifd: wan (2546): Stopping network
Thu Jan 4 13:42:00 2018 daemon.notice netifd: wan (2546): sending ->
Thu Jan 4 13:42:02 2018 authpriv.info dropbear[2554]: Child connection from 192.168.48.180:50520
Thu Jan 4 13:42:03 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:42:03 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:42:05 2018 daemon.notice netifd: wan (2555): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:42:05 2018 daemon.notice netifd: wan (2555): sending ->
Thu Jan 4 13:42:11 2018 authpriv.notice dropbear[2554]: Password auth succeeded for 'root' from 192.168.48.180:50520
Thu Jan 4 13:42:20 2018 daemon.notice netifd: wan (2555): Timeout running AT-command
Thu Jan 4 13:42:20 2018 daemon.notice netifd: wan (2555): Failed to set operating mode
Thu Jan 4 13:42:20 2018 daemon.notice netifd: wan (2654): Stopping network
Thu Jan 4 13:42:22 2018 daemon.notice netifd: wan (2654): sending ->
Thu Jan 4 13:42:25 2018 daemon.notice netifd: Interface 'wan' is now down
Thu Jan 4 13:42:25 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jan 4 13:42:27 2018 daemon.notice netifd: wan (2662): WARNING: Variable 'modes' does not exist or is not an array/object
Thu Jan 4 13:42:27 2018 daemon.notice netifd: wan (2662): sending ->
Thu Jan 4 13:42:43 2018 daemon.notice netifd: wan (2662): Timeout running AT-command
Thu Jan 4 13:42:43 2018 daemon.notice netifd: wan (2662): Failed to set operating mode
Thu Jan 4 13:42:43 2018 daemon.notice netifd: wan (2681): Stopping network
Thu Jan 4 13:42:45 2018 daemon.notice netifd: wan (2681): sending -> root@LuCI:~# ifstatus wan
{
"up": false,
"pending": true,
"available": true,
"autostart": true,
"dynamic": false,
"proto": "ncm",
"data": {
}
}
root@LuCI:~# ifstatus wan_4
Interface wan_4 not found Staruszek 1043v1 jest w stanie uzyskać ponad 500Mbps przepustowości przy natowaniu! Należy pamiętać że to były tylko testy, w rzeczywistym środowisku (wiele różnego ruchu, wielu klientów, wiele połączeń, różne rzeczy uruchomione na routerze) może być trochę mniej. Ale to i tak daje przyrost wydajności o ok 130%, co jest bardzo dobrym wynikiem.
Czy próbowałeś wykonać pomiar temperatury chipsetów, aby oszacować ryzyko spalenia?
Zastosowałem się do nieskutecznej porady
http://eko.one.pl/forum/viewtopic.php?p … 37#p190437
i wciąż modem nie może uzyskać połączenia (miga na niebiesko).
Co jeszcze mogę zrobić, z modemem Huawei E3372h (nie hilink) na WR1043ND v1.8?
----------------------------------------------------------------
| |
| OpenWrt Chaos Calmer 15.05.1 (r49474) |
| Build time: 2016-11-11 13:54 CET |
| |
| Cezary Jackiewicz (obsy), http://eko.one.pl |
| |
----------------------------------------------------------------
| Machine: TP-Link TL-WR1043N/ND v1 |
| Uptime: 0d, 01:23:27 |
| Load: 0.28 0.41 0.39 |
| Flash: total: 1.5MB, free: 980KB, used: 36% |
| Memory: total: 27.8MB, free: 8.9MB, used: 67% |
| WAN: |
| LAN: 192.168.48.188 |
| radio0: mode: ap, ssid: LU1043, channel: 11, conn: 0 |
----------------------------------------------------------------
root@LuCI:~# cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.18
S: Manufacturer=Linux 3.18.44 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 1.02
S: Manufacturer=HUAWEI_MOBILE
S: Product=HUAWEI_MOBILE
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
root@LuCI:~#
root@LuCI:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='XXXX:XXXX:XXXX::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.ifname='eth0.1'
network.lan.proto='static'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.ipaddr='192.168.48.188'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='dhcpv6'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='1 2 3 4 5t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0 5t'
network.PLAY=interface
network.PLAY.proto='3g'
network.PLAY.device='/dev/ttyUSB0'
network.PLAY.service='umts'
network.PLAY.apn='internet'
network.PLAY.ipv6='auto'
network.wan=interface
network.wan.proto='ncm'
network.wan.device='/dev/ttyUSB0'
network.wan.pincode='1234'
network.wan.apn='internet'
network.wan.mode='lte'
network.ORANGE=interface
network.ORANGE.proto='ncm'
network.ORANGE.device='/dev/ttyUSB0'
network.ORANGE.mode='preferlte'
network.ORANGE.apn='internet'
network.ORANGE.ipv6='0'Heh, działa na 21.200.07.00.209_M_02 :-). Jednak ten najnowszy firmware 21.315.01.00.143 z tej radzieckiej strony nie jest chyba do końca obsługiwany przez sterowniki z OPENWRT CC 15.05.1 oraz LEDE 17.01 do modemu E3372h
Pobrałem 21.200.07.00.209_M_02 z chomika.
Niestety u mnie wciąż tylko miganie niebieskiej diody i nie dochodzi do połączenia w modemie.
Chyba czegoś nie rozumiem. Przecież WAN, to właśnie interfejs wyjściowy do internetu, więc jak go odciąć?
W LuCI w zakładce Sieć -> Interfejsy
WAN, WAN6 i LAN mają taki sam MAC.
Nie chcę odcinać klientów, lecz router od modemu.
Mam bezpłatna taryfę nocną, ale każdy pobrany pakiet spoza tej taryfy zjada mi fundusze z taryfy podstawowej.
Teraz używam Gargoyle, bo działa perfekcyjnie z ustawionym czasem na 00:01-08:59
Filtrowanie polega na odcinaniu ruchu do sieci "wan".
Dziękuję za sprytny moduł. ![]()
Mój WAN bierze sieć z modemu na portcie USB.
W tabelce wyboru "MAC address" jest mój WAN.
Ustawiam więc regułę, ale nie działa.
Czy jest sposób, żeby odciąć WAN od internetu?
Dzięki. Czeka mnie dłubanina :-(
Jakby ktoś tu zajrzał, to podaję link bezpośredni:
eko.one.pl → Posty przez fsddt
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc