wgrałem tak
U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
P-2812HNU-Fx #

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
P-2812HNU-Fx # Ŕ

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  1

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
P-2812HNU-Fx #
ROM VER: 1.0.5
CFG 04
UART
********************************************************************************                                 ********************************************************************************                                 ********************************************************************************                                 *****************

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:06:52) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   125 MHz
IO:    125 MHz
BUS:   125 MHz
BOOT:  UART
DRAM:  256 MiB
Flash: 8 MiB
NAND:  128 MiB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
P-2812HNU-Fx # reset

ROM VER: 1.0.5
CFG 04
UART

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
P-2812HNU-Fx # protect off all
Un-Protect Flash Bank # 1
................................................................................                                 ....................................................... done
P-2812HNU-Fx # erase all
Erase Flash Bank # 1
................................................................................                                 ....................................................... done
P-2812HNU-Fx # tftp 0x80700000 openwrt-lantiq-p2812hnufx_nor-u-boot.img
ltq_phy: addr 0, link 0, speed 10, duplex 0
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 1, speed 1000, duplex 1
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-p2812hnufx_nor-u-boot.img'.
Load address: 0x80700000
Loading: ######################
done
Bytes transferred = 318632 (4dca8 hex)
P-2812HNU-Fx # cp.b 0x80700000 0xb0000000 0x4dca8
Copy to Flash... done
P-2812HNU-Fx # reset˙

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
P-2812HNU-Fx # tftp 0x80800000 openwrt-lantiq-xrx200-P2812HNUF3-uImage
ltq_phy: addr 0, link 0, speed 10, duplex 0
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 1, speed 1000, duplex 1
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-P2812HNUF3-uImage'.
Load address: 0x80800000
Loading: #################################################################
         ##################################
         5.5 MiB/s
done
Bytes transferred = 1448568 (161a78 hex)
P-2812HNU-Fx # nand erase.chip

NAND erase.chip: device 0 whole chip

nand0: MTD Erase failure: -5

nand0: MTD Erase failure: -5
....

nand0: MTD Erase failure: -5
Skipping bad block at  0x07700000

nand0: MTD Erase failure: -5
...
OK
P-2812HNU-Fx # nand write 0x80800000 0x0 0x200000

NAND write: device 0 offset 0x0, size 0x200000
nand_do_write_ops: Device is write protected
NAND write to offset 0 failed -5
0 bytes written: ERROR
P-2812HNU-Fx # <INTERRUPT>
P-2812HNU-Fx # tftpboot 0x80800000 openwrt-lantiq-xrx200-P2812HNUF3-uImage-initr                                 amfs
ltq_phy: addr 0, link 0, speed 10, duplex 0
ltq_phy: addr 1, link 0, speed 10, duplex 0
ltq_phy: addr 17, link 0, speed 10, duplex 0
ltq_phy: addr 19, link 1, speed 1000, duplex 1
ltq_phy: addr 5, link 0, speed 10, duplex 0
Using ltq-eth device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'openwrt-lantiq-xrx200-P2812HNUF3-uImage-initramfs'.
Load address: 0x80800000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         ####################################################
done
Bytes transferred = 4568229 (45b4a5 hex)
P-2812HNU-Fx # bootm 0x80800000
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-12-21  14:26:46 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    4568165 Bytes = 4.4 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.10.49 (sylwek@WRT) (gcc version 4.8.3 (OpenWrt/Li                                 naro GCC 4.8-2014.04 r43483) ) #2 Sun Dec 21 15:26:23 CET 2014
[    0.000000] SoC: VR9 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF3 - ZyXEL P-2812HNU-F3
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32                                  bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                 es: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00047140
[    0.000000] Readback ErrCtl register=00047140
[    0.000000] Memory: 122360k/131072k available (3046k kernel code, 8712k reser                                 ved, 1031k data, 3208k init, 0k highmem)
[    0.000000] NR_IRQS:256
[    0.000000] Setting up vectored interrupts
[    0.000000] CPU Clock: 500MHz
[    0.000000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036000] Mount-cache hash table entries: 512
[    0.040000] pinctrl core: initialized pinctrl subsystem
[    0.044000] NET: Registered protocol family 16
[    0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[    0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels:                                  28
[    0.068000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.072000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_assert[185]
[    0.184000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_deassert[193]
[    0.200000] bio: create slab <bio-0> at 0
[    0.204000] gpio-stp-xway 1e100bb0.stp: Init done
[    0.208000] usbcore: registered new interface driver usbfs
[    0.212000] usbcore: registered new interface driver hub
[    0.216000] usbcore: registered new device driver usb
[    0.220000] PCI host bridge to bus 0000:00
[    0.224000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[    0.228000] pci_bus 0000:00: root bus resource [io  0x1d800000-0x1d8fffff]
[    0.232000] pci_bus 0000:00: No busn resource found for root bus, will use [b                                 us 00-ff]
[    0.236000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci                                  bridge
[    0.248000] ifx_pcie_fixup_resource: fixup host controller 0000:00:00.0 (15d1                                 :0011)
[    0.252000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
[    0.256000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c00ffff]
[    0.260000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.264000] pci 0000:00:00.0:   bridge window [mem 0x1c000000-0x1c0fffff]
[    0.268000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[    0.272000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[    0.276000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[    0.280000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[    0.284000] Switching to clocksource MIPS
[    0.292000] NET: Registered protocol family 2
[    0.296000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.304000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.308000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.316000] TCP: reno registered
[    0.320000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.324000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.332000] NET: Registered protocol family 1
[    5.264000] gptu: totally 6 16-bit timers/counters
[    5.268000] gptu: misc_register on minor 63
[    5.272000] gptu: succeeded to request irq 126
[    5.276000] gptu: succeeded to request irq 127
[    5.280000] gptu: succeeded to request irq 128
[    5.284000] gptu: succeeded to request irq 129
[    5.288000] gptu: succeeded to request irq 130
[    5.296000] gptu: succeeded to request irq 131
[    5.300000] ralink,eeprom ralink_eep.6: using RT3092.eeprom as eeprom
[    5.308000] phy-xrx200 gphy-xrx200.5: requesting lantiq/vr9_phy11g_a1x.bin
[    5.316000] phy-xrx200 gphy-xrx200.5: booting GPHY0 firmware at 69E0000
[    5.320000] phy-xrx200 gphy-xrx200.5: booting GPHY1 firmware at 69E0000
[    5.428000] Wired TLB entries for Linux read_c0_wired() = 0
[    5.436000] config3 0x2424 MT 1
[    5.436000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
[    5.436000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
[    5.452000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.456000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT                                 Y) (c) 2001-2006 Red Hat, Inc.
[    5.468000] msgmni has been set to 238
[    5.472000] io scheduler noop registered
[    5.476000] io scheduler deadline registered (default)
[    5.484000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lant                                 iq,asc
[    5.492000] console [ttyLTQ0] enabled, bootconsole disabled
[    5.492000] console [ttyLTQ0] enabled, bootconsole disabled
[    5.504000] lantiq nor flash device: 00800000 at 10000000
[    5.508000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer                                  ID 0x0000c2 Chip ID 0x0022cb
[    5.516000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.524000]   Amd/Fujitsu Extended Query version 1.1.
[    5.528000] number of CFI chips: 1
[    5.532000] 4 ofpart partitions found on MTD device ltq_nor
[    5.536000] Creating 4 MTD partitions on "ltq_nor":
[    5.540000] 0x000000000000-0x000000050000 : "uboot"
[    5.548000] 0x000000050000-0x000000060000 : "board_config"
[    5.556000] 0x000000060000-0x000000070000 : "uboot_env"
[    5.560000] 0x000000070000-0x000000800000 : "unused"
[    5.568000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 1                                 28MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[    5.576000] Scanning device for bad blocks
[    5.600000] Bad eraseblock 215 at 0x000001ae0000
[    5.664000] Bad eraseblock 952 at 0x000007700000
[    5.672000] 2 ofpart partitions found on MTD device 14000000.nand-parts
[    5.676000] Creating 2 MTD partitions on "14000000.nand-parts":
[    5.684000] 0x000000000000-0x000000200000 : "kernel"
[    5.692000] 0x000000200000-0x000008000000 : "ubi"
[    5.804000] libphy: lantiq,xrx200-mdio: probed
[    5.812000] net-xrx200: invalid MAC, using random
[    5.816000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00                                 , irq=-1)
[    5.824000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01                                 , irq=-1)
[    5.832000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11                                 , irq=-1)
[    5.840000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13                                 , irq=-1)
[    5.848000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05                                 , irq=-1)
[    5.856000] wdt 1f8803f0.watchdog: Init done
[    5.860000] leds-gpio gpio-leds.8: pins are not configured from the driver
[    5.872000] TCP: cubic registered
[    5.872000] NET: Registered protocol family 17
[    5.876000] 8021q: 802.1Q VLAN Support v1.8
[    5.884000] UBI: auto-attach mtd5
[    5.888000] UBI: attaching mtd5 to ubi0
[    6.072000] UBI: scanning is finished
[    6.088000] UBI: attached mtd5 (name "ubi", size 126 MiB) to ubi0
[    6.092000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    6.100000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    6.104000] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    6.112000] UBI: good PEBs: 1006, bad PEBs: 2, corrupted PEBs: 0
[    6.116000] UBI: user volume: 0, internal volumes: 1, max. volumes count: 128
[    6.124000] UBI: max/mean erase counter: 1/1, WL threshold: 4096, image seque                                 nce number: 3652312891
[    6.136000] UBI: available PEBs: 984, total reserved PEBs: 22, PEBs reserved                                  for bad PEB h[    6.152000] Freeing unused kernel memory: 3208K (803fe000 - 8072                                 0000)
[    6.160000] UBI: background thread "ubi_bgt0d" started, PID 251
procd: Console is alive
procd: - watchdog -
[    6.232000] SCSI subsystem initialized
[    6.240000] IFXUSB: ifxusb_hcd: version 3.2 B110801
[    6.244000] Chip Version :01c0 BurstSize=0
[    6.848000] IFXUSB: USB core #0 soft-reset
[    7.152000] IFXUSB: USB core #0 soft-reset
[    7.152000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
[    7.156000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus numbe                                 r 1
[    7.164000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
[    7.172000] IFXUSB: Init: Power Port (0)
[    7.176000] hub 1-0:1.0: USB hub found
[    7.180000] hub 1-0:1.0: 1 port detected
[    7.684000] IFXUSB: USB core #1 soft-reset
[    7.988000] IFXUSB: USB core #1 soft-reset
[    7.988000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
[    7.992000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus numbe                                 r 2
[    8.000000] ifxusb_hcd ifxusb_hcd: irq 91, io mem 0xbe106000
[    8.008000] IFXUSB: Init: Power Port (0)
[    8.012000] hub 2-0:1.0: USB hub found
[    8.016000] hub 2-0:1.0: 1 port detected
[    8.020000] ifxusb_hcd ifxusb_hcd: requested GPIO 233
[    8.028000] usbcore: registered new interface driver usb-storage
procd: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    8.176000] eth0: port 4 got link
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[   12.592000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH

[   12.616000] NET: Registered protocol family 10
[   12.628000] NET: Registered protocol family 8
[   12.632000] NET: Registered protocol family 20
[   12.644000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   12.660000] PPP generic driver version 2.4.2
[   12.672000] nf_conntrack version 0.5.0 (1962 buckets, 7848 max)
[   12.684000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.700000] MEI CPE Driver, Version 1.2.0

[   12.704000] (c) Copyright 2009, Infineon Technologies AG
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###

Lantiq CPE API Driver version: DSL CPE API V4.11.4
[   12.728000]
[   12.728000] Predefined debug level: 2
[   12.740000] fuse init (API version 7.22)
[   12.748000] Loading modules backported from Linux version master-2014-05-22-0                                 -gf2032ea
[   12.752000] Backport generated by backports.git backports-20140320-37-g5c33da                                 0
[   12.764000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.776000] Infineon Technologies DEU driver version 2.0.0
[   12.780000] IFX DEU DES initialized (multiblock).
[   12.784000] IFX DEU AES initialized (multiblock).
[   12.792000] IFX DEU ARC4 initialized (multiblock).
[   12.796000] IFX DEU SHA1 initialized.
[   12.800000] IFX DEU MD5 initialized.
[   12.800000] IFX DEU SHA1_HMAC initialized.
[   12.808000] IFX DEU MD5_HMAC initialized.
[   12.828000] NET: Registered protocol family 24
[   12.836000] usbcore: registered new interface driver ums-alauda
[   12.844000] usbcore: registered new interface driver ums-cypress
[   12.852000] usbcore: registered new interface driver ums-datafab
[   12.856000] usbcore: registered new interface driver ums-freecom
[   12.864000] usbcore: registered new interface driver ums-isd200
[   12.872000] usbcore: registered new interface driver ums-jumpshot
[   12.876000] usbcore: registered new interface driver ums-karma
[   12.884000] usbcore: registered new interface driver ums-sddr09
[   12.892000] usbcore: registered new interface driver ums-sddr55
[   12.900000] usbcore: registered new interface driver ums-usbat
[   12.924000] xt_time: kernel timezone is -0000
[   12.952000] cfg80211: Calling CRDA to update world regulatory domain
[   12.956000] cfg80211: World regulatory domain updated:
[   12.960000] cfg80211:  DFS Master region: unset
[   12.964000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                 n, max_eirp), (dfs_cac_time)
[   12.976000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m                                 Bm), (N/A)
[   12.984000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 m                                 Bm), (N/A)
[   12.992000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 m                                 Bm), (N/A)
[   13.000000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000                                  mBm), (N/A)
[   13.008000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000                                  mBm), (0 s)
[   13.016000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000                                  mBm), (0 s)
[   13.024000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 m                                 Bm), (N/A)
[   13.032000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0                                  mBm), (N/A)
[   13.124000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[   13.128000] rt2800pci 0000:01:00.0: failed to load eeprom property
[   13.136000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEP                                 ROM data from 'RT3092.eeprom'.
[   13.144000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c d                                 etected
[   13.152000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
[   17.540000] PTM 1.0.27    PTM (E1) firmware version 0.30
[   17.544000] ifxmips_ptm: PTM init succeed
[   19.768000] device eth0.1 entered promiscuous mode
[   19.772000] device eth0 entered promiscuous mode
[   19.776000] br-lan: port 1(eth0.1) entered forwarding state
[   19.784000] br-lan: port 1(eth0.1) entered forwarding state
[   21.788000] br-lan: port 1(eth0.1) entered forwarding state
procd: - init complete -

BusyBox v1.22.1 (2014-12-21 15:15:42 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Barrier Breaker, r43483)
-----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# passwd
Changing password for root
New password:
Bad password: too weak
Retype password:
Password for root changed by root
root@OpenWrt:/# ubidetach -p /dev/mtd5
[  190.208000] UBI: detaching mtd5 from ubi0
[  190.212000] UBI: mtd5 is detached from ubi0
root@OpenWrt:/# ubiformat /dev/mtd5 -f /tmp/openwrt-lantiq-xrx200-P2812HNUF3-squ
ashfs-ubinized.bin
ubiformat: mtd5 (nand), size 132120576 bytes (126.0 MiB), 1008 eraseblocks of 13                                 1072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 1007 -- 100 % complete
ubiformat: 1006 eraseblocks have valid erase counter, mean value is 1
ubiformat: 2 bad eraseblocks found, numbers: 199, 936
ubiformat: flashing eraseblock 0 --  3 % complete  libmtd: error!: MEMERASE64 io                                 ctl failed for eraseblock 0 (mtd5)
        error 5 (Input/output error)

ubiformat: error!: failed to erase eraseblock 0
           error 5 (Input/output error)
ubiformat: mark it as bad? (y/N)

root@OpenWrt:/# ubiformat /dev/mtd5 -f /tmp/openwrt-lantiq-xrx200-P2812HNUF3-squ
ashfs-ubinized.bin
ubiformat: mtd5 (nand), size 132120576 bytes (126.0 MiB), 1008 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 1007 -- 100 % complete
ubiformat: 1006 eraseblocks have valid erase counter, mean value is 1
ubiformat: 2 bad eraseblocks found, numbers: 199, 936
ubiformat: flashing eraseblock 0 --  3 % complete  libmtd: error!: MEMERASE64 ioctl failed for eraseblock 0 (mtd5)
        error 5 (Input/output error)

ubiformat: error!: failed to erase eraseblock 0
           error 5 (Input/output error)
ubiformat: mark it as bad? (y/N) n
root@OpenWrt:/# restart
/bin/ash: restart: not found
root@OpenWrt:/# reboot
procd: - shutdown -
root@OpenWrt:/# procd: - reboot -[  406.092000] Res

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
P-2812HNU-Fx # etenv nboot ' nand read 0x80800000 0x0 0x200000; bootm 0x80800000'
Unknown command 'etenv' - try 'help'
P-2812HNU-Fx # setenv nboot ' nand read 0x80800000 0x0 0x200000; bootm 0x80800000'
P-2812HNU-Fx # setenv bootcmd 'run nboot'
P-2812HNU-Fx # saveenv
Saving Environment to Flash...
. done
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
. done
Protected 1 sectors
P-2812HNU-Fx # reboot
Unknown command 'reboot' - try 'help'
P-2812HNU-Fx # reboot
Unknown command 'reboot' - try 'help'
P-2812HNU-Fx # reset˙

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x0, size 0x200000
2097152 bytes read: OK
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-12-21  14:26:39 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1448504 Bytes = 1.4 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.10.49 (sylwek@WRT) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43483) ) #1 Sun Dec 21 15:25:34 CET 2014
[    0.000000] SoC: VR9 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF3 - ZyXEL P-2812HNU-F3
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00047140
[    0.000000] Readback ErrCtl register=00047140
[    0.000000] Memory: 125368k/131072k available (3046k kernel code, 5704k reserved, 1031k data, 200k init, 0k highmem)
[    0.000000] NR_IRQS:256
[    0.000000] Setting up vectored interrupts
[    0.000000] CPU Clock: 500MHz
[    0.000000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036000] Mount-cache hash table entries: 512
[    0.040000] pinctrl core: initialized pinctrl subsystem
[    0.044000] NET: Registered protocol family 16
[    0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[    0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.068000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.072000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_assert[185]
[    0.184000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_deassert[193]
[    0.200000] bio: create slab <bio-0> at 0
[    0.204000] gpio-stp-xway 1e100bb0.stp: Init done
[    0.208000] usbcore: registered new interface driver usbfs
[    0.212000] usbcore: registered new interface driver hub
[    0.216000] usbcore: registered new device driver usb
[    0.220000] PCI host bridge to bus 0000:00
[    0.224000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[    0.228000] pci_bus 0000:00: root bus resource [io  0x1d800000-0x1d8fffff]
[    0.232000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.236000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[    0.248000] ifx_pcie_fixup_resource: fixup host controller 0000:00:00.0 (15d1:0011)
[    0.252000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
[    0.256000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c00ffff]
[    0.260000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.264000] pci 0000:00:00.0:   bridge window [mem 0x1c000000-0x1c0fffff]
[    0.268000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[    0.272000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[    0.276000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[    0.280000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[    0.284000] Switching to clocksource MIPS
[    0.292000] NET: Registered protocol family 2
[    0.296000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.304000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.308000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.316000] TCP: reno registered
[    0.320000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.324000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.332000] NET: Registered protocol family 1
[    0.336000] gptu: totally 6 16-bit timers/counters
[    0.340000] gptu: misc_register on minor 63
[    0.344000] gptu: succeeded to request irq 126
[    0.348000] gptu: succeeded to request irq 127
[    0.352000] gptu: succeeded to request irq 128
[    0.360000] gptu: succeeded to request irq 129
[    0.364000] gptu: succeeded to request irq 130
[    0.368000] gptu: succeeded to request irq 131
[    0.372000] ralink,eeprom ralink_eep.6: using RT3092.eeprom as eeprom
[    0.380000] phy-xrx200 gphy-xrx200.5: requesting lantiq/vr9_phy11g_a1x.bin
[    0.388000] phy-xrx200 gphy-xrx200.5: booting GPHY0 firmware at 78C0000
[    0.396000] phy-xrx200 gphy-xrx200.5: booting GPHY1 firmware at 78C0000
[    0.500000] Wired TLB entries for Linux read_c0_wired() = 0
[    0.508000] config3 0x2424 MT 1
[    0.508000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
[    0.508000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
[    0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.532000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.540000] msgmni has been set to 244
[    0.544000] io scheduler noop registered
[    0.548000] io scheduler deadline registered (default)
[    0.556000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lantiq,asc
[    0.564000] console [ttyLTQ0] enabled, bootconsole disabled
[    0.564000] console [ttyLTQ0] enabled, bootconsole disabled
[    0.576000] lantiq nor flash device: 00800000 at 10000000
[    0.580000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[    0.592000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.596000]   Amd/Fujitsu Extended Query version 1.1.
[    0.600000] number of CFI chips: 1
[    0.604000] 4 ofpart partitions found on MTD device ltq_nor
[    0.608000] Creating 4 MTD partitions on "ltq_nor":
[    0.616000] 0x000000000000-0x000000050000 : "uboot"
[    0.620000] 0x000000050000-0x000000060000 : "board_config"
[    0.628000] 0x000000060000-0x000000070000 : "uboot_env"
[    0.632000] 0x000000070000-0x000000800000 : "unused"
[    0.640000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[    0.648000] Scanning device for bad blocks
[    0.672000] Bad eraseblock 215 at 0x000001ae0000
[    0.736000] Bad eraseblock 952 at 0x000007700000
[    0.744000] 2 ofpart partitions found on MTD device 14000000.nand-parts
[    0.752000] Creating 2 MTD partitions on "14000000.nand-parts":
[    0.756000] 0x000000000000-0x000000200000 : "kernel"
[    0.764000] 0x000000200000-0x000008000000 : "ubi"
[    0.876000] libphy: lantiq,xrx200-mdio: probed
[    0.884000] net-xrx200: invalid MAC, using random
[    0.888000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    0.896000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    0.904000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    0.912000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    0.920000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    0.928000] wdt 1f8803f0.watchdog: Init done
[    0.932000] leds-gpio gpio-leds.8: pins are not configured from the driver
[    0.944000] TCP: cubic registered
[    0.944000] NET: Registered protocol family 17
[    0.948000] 8021q: 802.1Q VLAN Support v1.8
[    0.956000] UBI: auto-attach mtd5
[    0.960000] UBI: attaching mtd5 to ubi0
[    1.148000] UBI: scanning is finished
[    1.160000] UBI: attached mtd5 (name "ubi", size 126 MiB) to ubi0
[    1.164000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.172000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.180000] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.184000] UBI: good PEBs: 1006, bad PEBs: 2, corrupted PEBs: 0
[    1.192000] UBI: user volume: 0, internal volumes: 1, max. volumes count: 128
[    1.196000] UBI: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 3652312891
[    1.208000] UBI: available PEBs: 984, total reserved PEBs: 22, PEBs reserved for bad PEB h[    1.216000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
[    1.224000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    1.232000] Please append a correct "root=" boot option; here are the available partitions:
[    1.240000] 1f00             320 mtdblock0  (driver?)
[    1.244000] 1f01              64 mtdblock1  (driver?)
[    1.248000] 1f02              64 mtdblock2  (driver?)
[    1.252000] 1f03            7744 mtdblock3  (driver?)
[    1.260000] 1f04            2048 mtdblock4  (driver?)
[    1.264000] 1f05          129024 mtdblock5  (driver?)
[    1.268000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   65.148000] PCIe RC error intr 161
[   65.1˙

U-Boot 2014.01-openwrt2 (Nov 15 2014 - 14:05:27) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NOR w/o BootROM
DRAM:  128 MiB
Flash: 8 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x0, size 0x200000
2097152 bytes read: OK
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-12-21  14:26:39 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1448504 Bytes = 1.4 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.10.49 (sylwek@WRT) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43483) ) #1 Sun Dec 21 15:25:34 CET 2014
[    0.000000] SoC: VR9 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF3 - ZyXEL P-2812HNU-F3
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=0004714a
[    0.000000] Readback ErrCtl register=0004714a
[    0.000000] Memory: 125368k/131072k available (3046k kernel code, 5704k reserved, 1031k data, 200k init, 0k highmem)
[    0.000000] NR_IRQS:256
[    0.000000] Setting up vectored interrupts
[    0.000000] CPU Clock: 500MHz
[    0.000000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036000] Mount-cache hash table entries: 512
[    0.040000] pinctrl core: initialized pinctrl subsystem
[    0.044000] NET: Registered protocol family 16
[    0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[    0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.068000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.072000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_assert[185]
[    0.184000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_deassert[193]
[    0.200000] bio: create slab <bio-0> at 0
[    0.204000] gpio-stp-xway 1e100bb0.stp: Init done
[    0.208000] usbcore: registered new interface driver usbfs
[    0.212000] usbcore: registered new interface driver hub
[    0.216000] usbcore: registered new device driver usb
[    0.220000] PCI host bridge to bus 0000:00
[    0.224000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[    0.228000] pci_bus 0000:00: root bus resource [io  0x1d800000-0x1d8fffff]
[    0.232000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.236000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
[    0.248000] ifx_pcie_fixup_resource: fixup host controller 0000:00:00.0 (15d1:0011)
[    0.252000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
[    0.256000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c00ffff]
[    0.260000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.264000] pci 0000:00:00.0:   bridge window [mem 0x1c000000-0x1c0fffff]
[    0.268000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[    0.272000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[    0.276000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[    0.280000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[    0.284000] Switching to clocksource MIPS
[    0.292000] NET: Registered protocol family 2
[    0.296000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.304000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.308000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.316000] TCP: reno registered
[    0.320000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.324000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.332000] NET: Registered protocol family 1
[    0.336000] gptu: totally 6 16-bit timers/counters
[    0.340000] gptu: misc_register on minor 63
[    0.344000] gptu: succeeded to request irq 126
[    0.348000] gptu: succeeded to request irq 127
[    0.352000] gptu: succeeded to request irq 128
[    0.360000] gptu: succeeded to request irq 129
[    0.364000] gptu: succeeded to request irq 130
[    0.368000] gptu: succeeded to request irq 131
[    0.372000] ralink,eeprom ralink_eep.6: using RT3092.eeprom as eeprom
[    0.380000] phy-xrx200 gphy-xrx200.5: requesting lantiq/vr9_phy11g_a1x.bin
[    0.388000] phy-xrx200 gphy-xrx200.5: booting GPHY0 firmware at 78C0000
[    0.396000] phy-xrx200 gphy-xrx200.5: booting GPHY1 firmware at 78C0000
[    0.500000] Wired TLB entries for Linux read_c0_wired() = 0
[    0.508000] config3 0x2424 MT 1
[    0.508000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
[    0.508000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
[    0.524000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.532000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.540000] msgmni has been set to 244
[    0.544000] io scheduler noop registered
[    0.548000] io scheduler deadline registered (default)
[    0.556000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lantiq,asc
[    0.564000] console [ttyLTQ0] enabled, bootconsole disabled
[    0.564000] console [ttyLTQ0] enabled, bootconsole disabled
[    0.576000] lantiq nor flash device: 00800000 at 10000000
[    0.580000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[    0.592000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.596000]   Amd/Fujitsu Extended Query version 1.1.
[    0.600000] number of CFI chips: 1
[    0.604000] 4 ofpart partitions found on MTD device ltq_nor
[    0.608000] Creating 4 MTD partitions on "ltq_nor":
[    0.616000] 0x000000000000-0x000000050000 : "uboot"
[    0.620000] 0x000000050000-0x000000060000 : "board_config"
[    0.628000] 0x000000060000-0x000000070000 : "uboot_env"
[    0.632000] 0x000000070000-0x000000800000 : "unused"
[    0.640000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[    0.648000] Scanning device for bad blocks
[    0.672000] Bad eraseblock 215 at 0x000001ae0000
[    0.736000] Bad eraseblock 952 at 0x000007700000
[    0.744000] 2 ofpart partitions found on MTD device 14000000.nand-parts
[    0.752000] Creating 2 MTD partitions on "14000000.nand-parts":
[    0.756000] 0x000000000000-0x000000200000 : "kernel"
[    0.764000] 0x000000200000-0x000008000000 : "ubi"
[    0.876000] libphy: lantiq,xrx200-mdio: probed
[    0.884000] net-xrx200: invalid MAC, using random
[    0.888000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    0.896000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    0.904000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    0.912000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    0.920000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    0.928000] wdt 1f8803f0.watchdog: Init done
[    0.932000] leds-gpio gpio-leds.8: pins are not configured from the driver
[    0.944000] TCP: cubic registered
[    0.944000] NET: Registered protocol family 17
[    0.948000] 8021q: 802.1Q VLAN Support v1.8
[    0.956000] UBI: auto-attach mtd5
[    0.960000] UBI: attaching mtd5 to ubi0
[    1.144000] UBI: scanning is finished
[    1.160000] UBI: attached mtd5 (name "ubi", size 126 MiB) to ubi0
[    1.164000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.172000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.176000] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.184000] UBI: good PEBs: 1006, bad PEBs: 2, corrupted PEBs: 0
[    1.192000] UBI: user volume: 0, internal volumes: 1, max. volumes count: 128
[    1.196000] UBI: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 3652312891
[    1.208000] UBI: available PEBs: 984, total reserved PEBs: 22, PEBs reserved for bad PEB h[    1.216000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
[    1.224000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    1.232000] Please append a correct "root=" boot option; here are the available partitions:
[    1.240000] 1f00             320 mtdblock0  (driver?)
[    1.244000] 1f01              64 mtdblock1  (driver?)
[    1.248000] 1f02              64 mtdblock2  (driver?)
[    1.252000] 1f03            7744 mtdblock3  (driver?)
[    1.260000] 1f04            2048 mtdblock4  (driver?)
[    1.264000] 1f05          129024 mtdblock5  (driver?)
[    1.268000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)