Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez adach
Teraz "dorwałem" świeżą kartę Virgin Mobile (z Żabki) i działa poprawnie względem wcześniejszej z Play.
Jak można wymusić LTE komendami AT?
Nie chodzi mi o konkretne pasma ale aby modem był "LTE Only". W sensie jak wymuszam słabe LTE2600 to mnie przerzuca do 3G Play a tego nie chcę.
Konkretne pasma LTE mogę wymusić przez easyconfig ale nie działa mi poprawnie wybranie "LTE Only" w Easyconfig
OK, nie rozumiałem komendy AT+QSIMDET? (odpowiedzi) i dzięki że mi wytłumaczyłeś.
Bez karty SIM, ponowne uruchomienie urządzenia po wyjęciu karty SIM
AT+QSIMSTAT?
+QSIMSTAT: 0,0
OK
AT+QSIMDET?
+QSIMDET: 1,1
OK
Wiem że to dziwne jest
Polecenie AT+QSIMDET?
Dla karty Orange (działającej) oraz Plus (starej starter który był do aktywacji do wakacji 2024r.)
+QSIMDET: 1,1
OK
Dla karty Play oraz Plush tej przeniesionej (nie działającej)
+QSIMDET: 1,1
OK
Jeszcze nie próbowałem z grubszą kartą ale zamówiłem sobie adapter "przedłużkę" SIM z Chin i to pojawi się pod koniec miesiąca.
Polecenie Cezarego nie zadziałało także po ponownym uruchomieniu sprzętu (dalej ten sam problem). Co do pozostałych poleceń AT
Przy prawidłowej karcie Orange:
AT+QSIMSTAT?
+QSIMSTAT: 0,1
OK
ORAZ
AT+QSIMDET
ERROR
-------------------------------------
Przy nieprawidłowej karcie Play
AT+QSIMSTAT?
+QSIMSTAT: 0,0
OK
ORAZ
AT+QSIMDET
ERROR
------------------------------------
Przy nieprawidłowej karcie Plush (tej przenoszonej w maju 2024r.)
AT+QSIMSTAT?
+QSIMSTAT: 0,0
OK
ORAZ
AT+QSIMDET
ERROR
------------------------------------
Przy prawidłowej karcie Plus (tej z datą ważności startera do wakacji 2024r.)
AT+QSIMSTAT?
+QSIMSTAT: 0,1
OK
ORAZ
AT+QSIMDET
ERROR
------------------------------------
Tak, jestem w zasięgu danego operatora, używam anteny zewnętrznej. Nie wiem jak w modemie włączyć roaming.
Mam inny problem z kartami SIM. Nie wiem czy nowe karty SIM są jakieś "inne" ? Mam problem z rozpoznawaniem kart SIM w LBR20.
1) Karta SIM T-Mobile 3 letnia działa poprawnie.
2) Karta SIM Aero2 (jakaś stara) działa poprawnie.
3) Karta SIM świeża Plusha nie jest wykrywana (numer był przenoszony do Plusha w maju 2024r.) natomiast inna karta SIM Plusa "starter z datą ważności do wakacji 2024r." jest wykrywana poprawnie.
Karta SIM ta pierwsza Plusha działa poprawnie w smartfonie.
4) Karta SIM Play nie jest wykrywana całkowicie ale w smartfonie działa. To chyba jakaś starsza ale działa poprawnie w smartfonie.
5) Karta SIM Orange (niedawno przenoszona z innej sieci) działa poprawnie.
Nie wiem czy karty SIM są produkowane jakieś "inne" ?
W GUI easyconfig Status karty SIM: Wyszukiwanie operatora na tych mających problem z działaniem.
Może warto zakupić jakiś adapter "przedłużkę" SIM ?
Może macie jakieś pomysły? Karty SIM są wkładane poprawnie. Po włożeniu jest zawsze ponowne uruchomienie rutera.
Zmieniłem na język angielski w LuCI (aby łatwiej znaleźć te opcje).
1) Network/Global network options/ włączyłem Packet Steering
2) Network/Firewal/Software flow offloading i włączyłem Software flow offloading oraz Hardware flow offloading
3) Ze strony openwrt.org znalazłem poradnik jak zainstalować Irqbalance i to wykonałem.
Być może troszkę rzeczy "nadmiarowych" wykonałem ale to działa.
OK, poradziłem sobie. Dzięki
Na ten moment nie wiem jeszcze co to Packet Steering/Flow offloading/Irqbalancing.
Jeśli chodzi o spinanie się karty.
Przegląd stanu sieci bezprzewodowych
Qualcomm Atheros QCA9886 802.11ac/n (radio 5 GHz)
Kanał: 64 (5.320 GHz) | Szybkość transmisji: 390 Mbit/s
Dla połączenia przy pomocy smartfona Poco F3 mam:
6.0 Mbit/s, 20 MHz
162.0 Mbit/s, 40 MHz, VHT-MCS 4, VHT-NSS 2
Na tym samym radiu jak podłączyłem przez WiFi laptopa
Qualcomm Atheros QCA9886 802.11ac/n
Kanał: 36 (5.180 GHz) | Szybkość transmisji: 191.4 Mbit/s
oraz
260.0 Mbit/s, 80 MHz, VHT-MCS 5, VHT-NSS 1, Krótki GI
325.0 Mbit/s, 80 MHz, VHT-MCS 7, VHT-NSS 1, Krótki GI
-----------------------------------------
Przegląd stanu sieci bezprzewodowych
Qualcomm Atheros IPQ4019 802.11b/g/n
Kanał: 6 (2.437 GHz) | Szybkość transmisji: 122.4 Mbit/s
Dla połączenia przy pomocy smartfona Poco F3 mam:
300.0 Mbit/s, 40 MHz, MCS 15, Krótki GI
300.0 Mbit/s, 40 MHz, MCS 15, Krótki GI
Na tym samym radiu jak podłączyłem przez WiFi laptopa
Qualcomm Atheros IPQ4019 802.11b/g/n
Kanał: 8 (2.447 GHz) | Szybkość transmisji: 80.3 Mbit/s
oraz
6.0 Mbit/s, 20 MHz
150.0 Mbit/s, 40 MHz, MCS 7, Krótki GI
----------------------
Przegląd stanu sieci bezprzewodowych
Qualcomm Atheros IPQ4019 802.11ac/n
Kanał: 157 (5.785 GHz) | Szybkość transmisji: 292.6 Mbit/s
Dla połączenia przy pomocy smartfona Poco F3 mam:
175.5 Mbit/s, 80 MHz, VHT-MCS 4, VHT-NSS 1
325.0 Mbit/s, 80 MHz, VHT-MCS 7, VHT-NSS 1, Krótki GI
Na tym samym radiu jak podłączyłem przez WiFi laptopa
Qualcomm Atheros IPQ4019 802.11ac/n
Kanał: 157 (5.785 GHz) | Szybkość transmisji: 97.6 Mbit/s
oraz
260.0 Mbit/s, 80 MHz, VHT-MCS 5, VHT-NSS 1, Krótki GI
130.0 Mbit/s, 80 MHz, VHT-MCS 3, VHT-NSS 1, Krótki GI
Sieć LAN na karcie mobilnej Orange 110 Mbit/s.
Sieć WiFi 2.4 GHz na karcie mobilnej Orange nie może przekroczyć 75 Mbit/s.
Sieć WiFi 5 GHz na karcie mobilnej Orange nie może przekroczyć 75 Mbit/s.
Sieć nie ma dużych zakłóceń. Teren wiejski. Dopiero na balkonie wykrywam inne sieci WiFi. Zmieniłem kanał na 2.4 GHz i nie ma poprawy. Nie ma szansy na zakłócenia na 5 GHz bo nawet nie sięgają na balkon.
Na "oryginalnym" oprogramowaniu i karcie innej sieci (Play) przez WiFi bez problemu szło 150 Mbit/s (także po kablu).
Wczoraj zainstalowałem najnowszą wersję LuCI na to urządzenie.
luci-23.05-SNAPSHOT (r23851-eda76b336b)
Dotychczas znalazłem jeden problem. Transferty na karcie Orange wynoszą ponad 100 Mbit/s (komputer podłączony kablem).
Na radiu obojętnie czy to 2.4 GHz czy 5 GHz wynoszą za każdym razem nie więcej niż 75 Mbit/s.
Rok temu wgrałem OpenWrt 3G (Gargoyle 1.3.10 ). Zainstalowałem modem 3G (Sierra USB 306) oraz pakiet 3ginfo. Wszytko dziś działa idealnie ale baardzo dużo mi zajęło co przedstawiłem w temacie: http://eko.one.pl/forum/viewtopic.php?id=911&p=7
Niestety stara wersja nie posiada IPv6 ale należy pamiętać że migracja na nowy standard wkrótce nastąpi:
http://www.dobreprogramy.pl/6-czerwca-s … 29867.html
Czytałem gdzieś na innym forum że ruter może się "wysypać" gdy się wgrywa tą nową wersję (chodzi mi o samą obsługę ipv6) więc konieczne jest odświeżenie obrazu do najnowszej wersji.
Zważywszy że jestem początkujący w Linuxie proszę o pomoc jak to wykonać. Podejrzewam że trzeba będzie
1) Przyjrzeć się obecnemu obrazowi bo bardzo długi zajęło mi zmuszenie go do obsługi 3G. Jakie polecenia mam wykonać ? Pewnie z konsoli Putty? i/lub wykonanie kopii obrazu oraz danych w ruterze (wiem że etap 1 jest najważniejszy)
2) Wgranie wersji sysupgrade w celu aktualizacji starej np. przez przeglądarkę www
3) Przywrócenie/skonfigurowanie obrazu instalacja pakietów
Ruter to TP-LINK TL-WR1043ND
Proszę o pomoc w przeprowadzeniu mnie w tym procesie
To wpisuje vi /root/.gnokiirc
następnie linika po linice:
[global]
model = AT
port = /dev/ttyUSB3
connection = serial
Czyli inny port. Widzę że trzeba to zapisać.Widze że edytuje się to jak w notatniku. Nie potrafię tego zapisać a ESC nie działa w Putty. O co chodzi z tym "qw!" bo Google nic nie mówi
Czy możecie wytłumaczyć mi prościej co mam wpisać: "Następnie należy utworzyć plik konfiguracyjny. Może być on umieszczony w /root/.gnokiirc lub /etc/gnokiirc."
Cezary udało mi się jakoś zainstalować Sierrę USB 306 na tym ruterze na OpenWrt. Do kompletu brakuje mi tylko obsługi SMS:
root@Gargoyle:~# 3ginfo-test
Waiting for Registration...................................^C
//już wcześniej wykonałem opkg install http://eko.one.pl/openwrt/3ginfo_1-21_all.ipk
root@Gargoyle:~# /etc/init.d/3ginfo enable
root@Gargoyle:~# /etc/init.d/3ginfo start
Notice: Unable to load TLS plugin - disabling SSL support! (Reason: File not found)
bind(): Address already in use
Error: No sockets bound, unable to continue
root@Gargoyle:~# opkg install gnokii bluez-libs libpcsclite
Package gnokii (0.6.21-3) installed in root is up to date.
Package bluez-libs (3.36-3) installed in root is up to date.
Package libpcsclite (1.5.5-3) installed in root is up to date.
root@Gargoyle:~#
root@Gargoyle:~# [J
//sterownikido modemu są zainstalowane ponieważ modem poprawnie działa z ruterem jeżeli chodzi o połączenie
Interfejs graficzny działa poprawnie (czyli tylko wyświetlana jest siła sygnału oraz status Połączony/rozłączony) ale gdy kliknę SMS to nie mogę doczekać się na otwarcie strony SMS.
SMS-y są niezbędne ponieważ przy wysłaniu "magicznego listu" pod koniec umowy do mojego ISP dostaje się rabat 50%
Cezary. Podobny problem został tutaj rozwiązany https://forum.openwrt.org/viewtopic.php?id=22112. Czy mógłbyś mi wytłumaczyć co według tego mam zrobić bo nie za dobrze orientuje się w "Linuxowym świecie".
Nie mam huba - modem jest bezpośrednio podłączony do rutera. Zasilanie wyrabia ponieważ modem działał pod DD-WRT tylko te nieszczęsne zawieszanie się LAN-u wtedy występowało. Picocon zainstalowałem - komendy AT działają poprawnie. Jak odinstalowywałem DD-WRT to korzystałem z pendrive który dobrze działał więc wykluczam uszkodzenie portu USB. Niepokoi mnie przy wpisywaniu komend:
root@Gargoyle:~# MODE="AT+CGDCONT=1,\"IP\",\"www.plusgsm.pl\"" gcom -d /dev/t
tyUSB2 -s /etc/gcom/setmode.gcom
Trying to set mode
Timeout setting WWAN mode!
root@Gargoyle:~# MODE="AT!SCACT=1,1" gcom -d /dev/ttyUSB2 -s /etc/gcom/setmode.gcom
Trying to set mode
Timeout setting WWAN mode!
DD-WRT bardzo się cięło u mnie i LAN co jakiś czas zamierał(trzeba było robić reset do ustawień domyślnych). Zainstalowałem gargoyle/openwrt3g; postępowałem tak jak w drugim poście od góry. Dioda świeci prawidłowo czyli tak jak po podłączeniu do PC przed połączeniem z Internetem. Modem ten sam -Sierra USB 306-Plus ale nie mogę się połączyć. Brak PIN-u na karcie SIM
root@Gargoyle:~# logread
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: timeout set to 30 seconds
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: expect (OK)
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: ^M
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: AT+CGDCONT=1,"IP","www.plusgsm.pl"^M^M
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: OK
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: -- got it
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: send (ATD*99***1#^M)
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: expect (CONNECT)
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: ^M
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: ATD*99***1#^M^M
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: CONNECT
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: -- got it
Jan 1 01:12:39 Gargoyle local2.info chat[3994]: send ( ^M)
Jan 1 01:12:39 Gargoyle daemon.info pppd[2998]: Serial connection established.
Jan 1 01:12:39 Gargoyle authpriv.notice dropbear[3992]: password auth succeeded for 'root' from 192.168.1.134:50695
Jan 1 01:12:39 Gargoyle daemon.info pppd[2998]: Using interface 3g-wan
Jan 1 01:12:39 Gargoyle daemon.notice pppd[2998]: Connect: 3g-wan <--> /dev/ttyUSB2
Jan 1 01:12:40 Gargoyle daemon.info pppd[2998]: CHAP authentication succeeded
Jan 1 01:12:40 Gargoyle daemon.notice pppd[2998]: CHAP authentication succeeded
Jan 1 01:12:47 Gargoyle daemon.info pppd[2998]: Hangup (SIGHUP)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:12:47 Gargoyle daemon.notice pppd[2998]: Modem hangup
Jan 1 01:12:47 Gargoyle daemon.notice pppd[2998]: Connection terminated.
Jan 1 01:13:08 Gargoyle daemon.info hostapd: wlan0: STA 00:22:b0:0b:76:98 IEEE 802.11: disassociated
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: abort on (BUSY)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: abort on (NO CARRIER)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: abort on (ERROR)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: report (CONNECT)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: timeout set to 10 seconds
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: send (AT&F^M)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: expect (OK)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: AT&F^M^M
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: OK
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: -- got it
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: send (ATE1^M)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: expect (OK)
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: ^M
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: ATE1^M^M
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: OK
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: -- got it
Jan 1 01:13:19 Gargoyle local2.info chat[4053]: send (AT+CGDCONT=1,"IP","www.plusgsm.pl"^M)
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: timeout set to 30 seconds
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: expect (OK)
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: ^M
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: AT+CGDCONT=1,"IP","www.plusgsm.pl"^M^M
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: OK
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: -- got it
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: send (ATD*99***1#^M)
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: expect (CONNECT)
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: ^M
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: ATD*99***1#^M^M
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: CONNECT
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: -- got it
Jan 1 01:13:20 Gargoyle local2.info chat[4053]: send ( ^M)
Jan 1 01:13:20 Gargoyle daemon.info pppd[2998]: Serial connection established.
Jan 1 01:13:20 Gargoyle daemon.info pppd[2998]: Using interface 3g-wan
Jan 1 01:13:20 Gargoyle daemon.notice pppd[2998]: Connect: 3g-wan <--> /dev/ttyUSB2
Jan 1 01:13:21 Gargoyle daemon.info pppd[2998]: CHAP authentication succeeded
Jan 1 01:13:21 Gargoyle daemon.notice pppd[2998]: CHAP authentication succeeded
Jan 1 01:13:27 Gargoyle daemon.info pppd[2998]: Hangup (SIGHUP)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle daemon.notice pppd[2998]: Modem hangup
Jan 1 01:13:27 Gargoyle daemon.notice pppd[2998]: Connection terminated.
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:27 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: abort on (BUSY)
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: abort on (NO CARRIER)
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: abort on (ERROR)
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: report (CONNECT)
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: timeout set to 10 seconds
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: send (AT&F^M)
Jan 1 01:13:59 Gargoyle local2.info chat[4092]: expect (OK)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: AT&F^M^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: OK
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: -- got it
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: send (ATE1^M)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: expect (OK)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: ^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: ATE1^M^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: OK
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: -- got it
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: send (AT+CGDCONT=1,"IP","www.plusgsm.pl"^M)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: timeout set to 30 seconds
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: expect (OK)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: ^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: AT+CGDCONT=1,"IP","www.plusgsm.pl"^M^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: OK
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: -- got it
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: send (ATD*99***1#^M)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: expect (CONNECT)
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: ^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: ATD*99***1#^M^M
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: CONNECT
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: -- got it
Jan 1 01:14:00 Gargoyle local2.info chat[4092]: send ( ^M)
Jan 1 01:14:00 Gargoyle daemon.info pppd[2998]: Serial connection established.
Jan 1 01:14:00 Gargoyle daemon.info pppd[2998]: Using interface 3g-wan
Jan 1 01:14:00 Gargoyle daemon.notice pppd[2998]: Connect: 3g-wan <--> /dev/ttyUSB2
Jan 1 01:14:01 Gargoyle daemon.info pppd[2998]: CHAP authentication succeeded
Jan 1 01:14:01 Gargoyle daemon.notice pppd[2998]: CHAP authentication succeeded
Jan 1 01:14:07 Gargoyle daemon.info pppd[2998]: Hangup (SIGHUP)
Jan 1 01:14:07 Gargoyle daemon.notice pppd[2998]: Modem hangup
Jan 1 01:14:07 Gargoyle daemon.notice pppd[2998]: Connection terminated.
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:07 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: abort on (BUSY)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: abort on (NO CARRIER)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: abort on (ERROR)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: report (CONNECT)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: timeout set to 10 seconds
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: send (AT&F^M)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: expect (OK)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: AT&F^M^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: OK
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: -- got it
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: send (ATE1^M)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: expect (OK)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: ^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: ATE1^M^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: OK
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: -- got it
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: send (AT+CGDCONT=1,"IP","www.plusgsm.pl"^M)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: timeout set to 30 seconds
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: expect (OK)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: ^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: AT+CGDCONT=1,"IP","www.plusgsm.pl"^M^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: OK
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: -- got it
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: send (ATD*99***1#^M)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: expect (CONNECT)
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: ^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: ATD*99***1#^M^M
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: CONNECT
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: -- got it
Jan 1 01:14:40 Gargoyle local2.info chat[4131]: send ( ^M)
Jan 1 01:14:40 Gargoyle daemon.info pppd[2998]: Serial connection established.
Jan 1 01:14:40 Gargoyle daemon.info pppd[2998]: Using interface 3g-wan
Jan 1 01:14:40 Gargoyle daemon.notice pppd[2998]: Connect: 3g-wan <--> /dev/ttyUSB2
Jan 1 01:14:41 Gargoyle daemon.info hostapd: wlan0: STA 00:22:b0:0b:76:98 IEEE 802.11: authenticated
Jan 1 01:14:41 Gargoyle daemon.info hostapd: wlan0: STA 00:22:b0:0b:76:98 IEEE 802.11: associated (aid 1)
Jan 1 01:14:41 Gargoyle daemon.info dnsmasq-dhcp[3435]: DHCPREQUEST(br-lan) 192.168.1.134 00:22:b0:0b:76:98
Jan 1 01:14:41 Gargoyle daemon.info dnsmasq-dhcp[3435]: DHCPACK(br-lan) 192.168.1.134 00:22:b0:0b:76:98 DomowyR-PC
Jan 1 01:14:42 Gargoyle daemon.info pppd[2998]: CHAP authentication succeeded
Jan 1 01:14:42 Gargoyle daemon.notice pppd[2998]: CHAP authentication succeeded
Jan 1 01:14:48 Gargoyle daemon.info pppd[2998]: Hangup (SIGHUP)
Jan 1 01:14:48 Gargoyle daemon.notice pppd[2998]: Modem hangup
Jan 1 01:14:48 Gargoyle daemon.notice pppd[2998]: Connection terminated.
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:48 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:14:54 Gargoyle authpriv.info dropbear[4315]: Child connection from 192.168.1.134:50849
Jan 1 01:14:59 Gargoyle authpriv.notice dropbear[4315]: password auth succeeded for 'root' from 192.168.1.134:50849
Jan 1 01:15:07 Gargoyle authpriv.info dropbear[4315]: exit after auth (root): Exited normally
Jan 1 01:15:19 Gargoyle authpriv.info dropbear[4322]: Child connection from 192.168.1.134:50850
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: abort on (BUSY)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: abort on (NO CARRIER)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: abort on (ERROR)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: report (CONNECT)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: timeout set to 10 seconds
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: send (AT&F^M)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: expect (OK)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: AT&F^M^M
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: OK
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: -- got it
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: send (ATE1^M)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: expect (OK)
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: ^M
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: ATE1^M^M
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: OK
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: -- got it
Jan 1 01:15:20 Gargoyle local2.info chat[4324]: send (AT+CGDCONT=1,"IP","www.plusgsm.pl"^M)
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: timeout set to 30 seconds
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: expect (OK)
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: ^M
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: AT+CGDCONT=1,"IP","www.plusgsm.pl"^M^M
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: OK
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: -- got it
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: send (ATD*99***1#^M)
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: expect (CONNECT)
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: ^M
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: ATD*99***1#^M^M
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: CONNECT
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: -- got it
Jan 1 01:15:21 Gargoyle local2.info chat[4324]: send ( ^M)
Jan 1 01:15:21 Gargoyle daemon.info pppd[2998]: Serial connection established.
Jan 1 01:15:21 Gargoyle daemon.info pppd[2998]: Using interface 3g-wan
Jan 1 01:15:21 Gargoyle daemon.notice pppd[2998]: Connect: 3g-wan <--> /dev/ttyUSB2
Jan 1 01:15:22 Gargoyle daemon.info pppd[2998]: CHAP authentication succeeded
Jan 1 01:15:22 Gargoyle daemon.notice pppd[2998]: CHAP authentication succeeded
Jan 1 01:15:24 Gargoyle authpriv.notice dropbear[4322]: password auth succeeded for 'root' from 192.168.1.134:50850
Jan 1 01:15:28 Gargoyle daemon.info pppd[2998]: Hangup (SIGHUP)
Jan 1 01:15:28 Gargoyle daemon.notice pppd[2998]: Modem hangup
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle daemon.notice pppd[2998]: Connection terminated.
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Jan 1 01:15:28 Gargoyle user.err kernel: sierra ttyUSB2: resubmit read urb failed.(-1)
Udało się. Dzięki wszystkim 
1)Zmieniłem APN na www.plusgsm.pl oraz login/hasło na plusgsm
2)U mnie jest średni zasięg 2G -90dBm oraz słaby 3G z anteną -100dBm. Moje próby połączenia dotyczyły zasięgu 2G wymuszonego w Watcherze Sierry oraz przy trybie automatycznym w DD-WRT. Pomogło ... podłączenie anteny zewnętrznej z słabym zasięgiem 3G. Gdy został wykryty to mogłem już dowolnie to zmieniać zasięg. Dziwne ?
Zauważyłem że DD-WRT działa stabilnie jeśli wybiorę ręcznie DNS-y. Internet bardzo dobrze śmiga - tak jak pod Linuxem. Firmware Linuxowe to fajna sprawa:)
Dziś zainstalowałem nowszą testową wersję DD-WRT od BrainSlayer czyli
Firmware: DD-WRT v24-sp2 (11/21/10) std (build 15778). Oczywiście dane operatora oraz obsługę USB skonfigurowałem jak poprzednio. Po wpisaniu wspomnianego polecenia Putty długo myśli. Dziś ponownie sprawdzałem czy modem działa pod Ubuntu 10.10 - działał bez zarzutów bez dodatkowej konfiguracji. Interfejs który pojawił mi się w Ubuntu w standardowym programie do łączenia się z siecią z tego systemu to ttyUSB2. Ponownie wyłączyłem PIN w DD-WRT i na karcie SIM
Zauważyłem że takie samo "miganie" diody występuje w modemie jak w ruterze oraz PC gdy zmieniam rodzaj sieci ręcznie 2G/3G czyli dioda pomarańczowa miga co 1,5 sekundy. Na PC wygląda ten moment tak:
Uploaded with ImageShack.us
root@DD-WRT:~# [Jcomgt -d /dev/usb/tts/0
***SIM ERROR***
Check device port configuration.
Check SIM is inserted
Test SIM in a mobile phone?
Jeszcze raz pokaże wynik polecenia dmesg ponieważ zawiera zapewne więcej szczegółów:
root@DD-WRT:~# dmesg
<5>[ 0.000000] Linux version 2.6.34.7-svn15501 (root@dd-wrt) (gcc version 4.3.3 (GCC) ) #1769 Sun Nov 21 11:27:26 CET 2010
<4>[ 0.000000] flash_size passed from bootloader = 8
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
<6>[ 0.000000] booting platform Atheros AR9132 rev 2 (0xb9)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00000000 -> 0x00002000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00002000
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 80259160, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 29640k/32768k available (2052k kernel code, 3128k reserved, 344k data, 144k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:128
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.000000] Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
<4>[ 0.240000] Mount-cache hash table entries: 512
<6>[ 0.240000] NET: Registered protocol family 16
<4>[ 0.260000] bio: create slab <bio-0> at 0
<6>[ 0.260000] Switching to clocksource MIPS
<6>[ 0.270000] NET: Registered protocol family 2
<6>[ 0.270000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.280000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[ 0.290000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.290000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.300000] TCP reno registered
<6>[ 0.300000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.310000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.310000] NET: Registered protocol family 1
<5>[ 0.320000] gpio_proc: module loaded and /proc/gpio/ created
<4>[ 0.320000] AR7100 GPIOC major 0
<5>[ 0.330000] init_vdso successfull
<6>[ 0.330000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.340000] msgmni has been set to 57
<6>[ 0.340000] io scheduler noop registered
<6>[ 0.350000] io scheduler deadline registered (default)
<6>[ 0.350000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.360000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 0.370000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.380000] guessed flashsize = 8M
<0>[ 0.380000] scanning for root partition
<0>[ 0.390000] tplink uboot detected
<0>[ 0.390000] bootloader size = 20000
<0>[ 0.400000]
<0>[ 0.400000] found squashfs at 160000
<5>[ 0.400000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 0.410000] 0x000000000000-0x000000020000 : "RedBoot"
<5>[ 0.410000] 0x000000020000-0x0000007e0000 : "linux"
<5>[ 0.420000] 0x000000160000-0x000000790000 : "rootfs"
<5>[ 0.430000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.430000] 0x000000790000-0x0000007e0000 : "ddwrt"
<5>[ 0.440000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.440000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[ 0.450000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.460000] 0x000000000000-0x000000800000 : "fullflash"
<6>[ 0.460000] PPP generic driver version 2.4.2
<6>[ 0.470000] PPP Deflate Compression module registered
<6>[ 0.470000] PPP BSD Compression module registered
<6>[ 0.480000] PPP MPPE Compression module registered
<6>[ 0.480000] NET: Registered protocol family 24
<6>[ 0.490000] PPPoL2TP kernel driver, V1.0
<6>[ 0.490000] IMQ driver loaded successfully.
<6>[ 0.500000] Hooking IMQ before NAT on PREROUTING.
<6>[ 0.500000] Hooking IMQ after NAT on POSTROUTING.
<6>[ 0.510000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.510000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.520000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
<4>[ 0.530000] u32 classifier
<4>[ 0.530000] input device check on
<4>[ 0.530000] Actions configured
<4>[ 0.540000] Netfilter messages via NETLINK v0.30.
<4>[ 0.540000] nf_conntrack version 0.5.0 (463 buckets, 1852 max)
<4>[ 0.550000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 0.560000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 0.560000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[ 0.570000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 0.570000] nf_nat_rtsp v0.6.21 loading
<6>[ 0.580000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.580000] IPP2P v0.8.2 loading
<6>[ 0.590000] TCP westwood registered
<6>[ 0.590000] TCP hybla registered
<6>[ 0.590000] TCP vegas registered
<6>[ 0.600000] NET: Registered protocol family 17
<5>[ 0.600000] Bridge firewalling registered
<6>[ 0.610000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>[ 0.610000] All bugs added by David S. Miller <davem@redhat.com>
<4>[ 0.650000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 0.660000] Freeing unused kernel memory: 144k freed
<5>[ 2.860000] Realtek RTL8366RB ethernet switch driver version 0.2.2
<6>[ 2.870000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
<6>[ 2.870000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
<6>[ 2.900000] rtl8366rb: probed
<4>[ 2.920000] ag7100_mod: module license 'unspecified' taints kernel.
<4>[ 2.920000] Disabling lock debugging due to kernel taint
<6>[ 2.940000] ag7100_mii: probed
<0>[ 2.940000] phymap is null
<6>[ 3.370000] usbcore: registered new interface driver usbfs
<6>[ 3.380000] usbcore: registered new interface driver hub
<6>[ 3.390000] usbcore: registered new device driver usb
<6>[ 3.480000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 3.510000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[ 3.520000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[ 3.560000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[ 3.580000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[ 3.580000] hub 1-0:1.0: USB hub found
<6>[ 3.590000] hub 1-0:1.0: 1 port detected
<5>[ 3.900000] SCSI subsystem initialized
<6>[ 4.250000] Initializing USB Mass Storage driver...
<6>[ 4.250000] usbcore: registered new interface driver usb-storage
<6>[ 4.260000] USB Mass Storage support registered.
<4>[ 4.410000] Writing 4
<6>[ 4.710000] ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
<6>[ 5.160000] ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<6>[ 5.160000] ath_dfs: Version 2.0.0
<6>[ 5.160000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
<6>[ 5.170000] wlan: 0.8.4.2 (Atheros/multi-bss)
<6>[ 5.180000] wlan: mac acl policy registered
<6>[ 5.180000] ath_rate_atheros: Version 2.0.1
<6>[ 5.180000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<4>[ 5.200000] IRQ 2/wifi%d: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[ 5.430000] ar5416CheckEepromDef: Read Magic = 0xFFFF
<6>[ 5.430000] EEPROM being read from flash @0xbfff1000
<6>[ 5.440000] need_swap = False.
<6>[ 5.440000] Howl Revision ID 0xb9
<4>[ 5.450000] dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
<4>[ 5.460000] 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>[ 5.460000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.470000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.480000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 5.480000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.490000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 5.500000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.500000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 5.510000] wifi0: mac 20.0 phy 10.2 radio 13.0
<4>[ 5.510000] wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>[ 5.520000] wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>[ 5.520000] wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>[ 5.530000] wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>[ 5.530000] wifi0: Use hw queue 8 for CAB traffic
<4>[ 5.540000] wifi0: Use hw queue 9 for beacons
<4>[ 5.540000] wifi0: Use hw queue 7 for UAPSD
<6>[ 5.550000] wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
<6>[ 7.420000] device br0 entered promiscuous mode
<6>[ 7.440000] br0: starting userspace STP failed, starting kernel STP
<6>[ 7.480000] device vlan1 entered promiscuous mode
<6>[ 7.490000] device eth0 entered promiscuous mode
<6>[ 7.530000] device vlan2 entered promiscuous mode
<4>[ 7.700000]
<4>[ 7.700000] ath_numswbaperbc = 8(1)adj=76800
<6>[ 11.060000] device ath0 entered promiscuous mode
<6>[ 11.090000] br0: port 3(ath0) entering listening state
<6>[ 11.090000] br0: port 2(vlan2) entering listening state
<6>[ 11.100000] br0: port 1(vlan1) entering listening state
<6>[ 11.100000] device br0 left promiscuous mode
<6>[ 11.110000] device br0 entered promiscuous mode
<6>[ 11.120000] device br0 left promiscuous mode
<6>[ 11.130000] device br0 entered promiscuous mode
<6>[ 11.340000] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
<6>[ 11.340000] bonding: MII link monitoring set to 100 ms
<6>[ 12.090000] br0: port 3(ath0) entering learning state
<6>[ 12.100000] br0: port 2(vlan2) entering learning state
<6>[ 12.100000] br0: port 1(vlan1) entering learning state
<6>[ 12.730000] usbcore: registered new interface driver usbserial
<6>[ 12.730000] USB Serial support registered for generic
<6>[ 12.740000] usbcore: registered new interface driver usbserial_generic
<6>[ 12.740000] usbserial: USB Serial Driver core
<6>[ 13.090000] br0: topology change detected, propagating
<6>[ 13.090000] br0: port 3(ath0) entering forwarding state
<6>[ 13.100000] br0: topology change detected, propagating
<6>[ 13.100000] br0: port 2(vlan2) entering forwarding state
<6>[ 13.110000] br0: topology change detected, propagating
<6>[ 13.110000] br0: port 1(vlan1) entering forwarding state
<6>[ 13.120000] USB Serial support registered for Sierra USB modem
<6>[ 13.130000] usbcore: registered new interface driver sierra
<6>[ 13.140000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
<6>[ 13.230000] USB Serial support registered for GSM modem (1-port)
<6>[ 13.230000] usbcore: registered new interface driver option
<6>[ 13.240000] option: v0.7.2:USB Driver for GSM modems
<4>[ 14.630000] Freeing node: 74:ea:3a:ab:ea:38
<4>[ 14.640000] ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
<6>[ 15.230000] etherip: Ethernet over IPv4 tunneling driver
<4>[ 29.650000] Configuring keys for mac:00:22:b0:0b:76:98, sc_hasclrkey is set
<6>[ 46.880000] usb 1-1: new high speed USB device using ar71xx-ehci and address 2
<4>[ 47.030000] usb 1-1: config 1 has an invalid interface number: 9 but max is 0
<4>[ 47.030000] usb 1-1: config 1 has no interface number 0
<4>[ 47.050000] usb-storage: probe of 1-1:1.9 failed with error -5
<6>[ 47.780000] usb 1-1: USB disconnect, address 2
<6>[ 48.180000] usb 1-1: new high speed USB device using ar71xx-ehci and address 3
<4>[ 48.330000] usb 1-1: config 1 has an invalid interface number: 7 but max is 4
<4>[ 48.330000] usb 1-1: config 1 has no interface number 2
<6>[ 48.340000] sierra 1-1:1.0: Sierra USB modem converter detected
<6>[ 48.370000] usb 1-1: Sierra USB modem converter now attached to ttyUSB0
<6>[ 48.370000] sierra 1-1:1.1: Sierra USB modem converter detected
<6>[ 48.410000] usb 1-1: Sierra USB modem converter now attached to ttyUSB1
<6>[ 48.420000] sierra 1-1:1.3: Sierra USB modem converter detected
<6>[ 48.450000] usb 1-1: Sierra USB modem converter now attached to ttyUSB2
<6>[ 48.450000] sierra 1-1:1.4: Sierra USB modem converter detected
<6>[ 48.480000] usb 1-1: Sierra USB modem converter now attached to ttyUSB3
<6>[ 88.680000] device vlan1 left promiscuous mode
<6>[ 88.690000] br0: port 1(vlan1) entering disabled state
<6>[ 88.700000] device vlan2 left promiscuous mode
<6>[ 88.700000] br0: port 2(vlan2) entering disabled state
<6>[ 88.710000] device ath0 left promiscuous mode
<6>[ 88.720000] br0: port 3(ath0) entering disabled state
<6>[ 89.290000] device vlan1 entered promiscuous mode
<6>[ 89.300000] br0: port 1(vlan1) entering listening state
<6>[ 89.340000] device vlan2 entered promiscuous mode
<6>[ 89.340000] br0: port 2(vlan2) entering listening state
<4>[ 89.430000]
<4>[ 89.430000] ath_numswbaperbc = 8(1)adj=76800
<6>[ 90.300000] br0: port 1(vlan1) entering learning state
<6>[ 90.350000] br0: port 2(vlan2) entering learning state
<6>[ 91.300000] br0: topology change detected, propagating
<6>[ 91.300000] br0: port 1(vlan1) entering forwarding state
<6>[ 91.350000] br0: topology change detected, propagating
<6>[ 91.350000] br0: port 2(vlan2) entering forwarding state
<6>[ 92.740000] device ath0 entered promiscuous mode
<6>[ 92.750000] br0: port 3(ath0) entering listening state
<6>[ 92.770000] device br0 left promiscuous mode
<6>[ 92.780000] device br0 entered promiscuous mode
<6>[ 92.780000] device br0 left promiscuous mode
<6>[ 92.790000] device br0 entered promiscuous mode
<6>[ 92.890000] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
<6>[ 92.890000] bonding: MII link monitoring set to 100 ms
<6>[ 93.750000] br0: port 3(ath0) entering learning state
<6>[ 94.750000] br0: topology change detected, propagating
<6>[ 94.750000] br0: port 3(ath0) entering forwarding state
<4>[ 96.340000] Freeing node: 74:ea:3a:ab:ea:38
<4>[ 96.350000] ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
<4>[ 96.780000] Configuring keys for mac:00:22:b0:0b:76:98, sc_hasclrkey is set
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.12.18 14:01:49 =~=~=~=~=~=~=~=~=~=~=~=
DD-WRT v24-sp2 std (c) 2010 NewMedia-NET GmbH
Release: 08/07/10 (SVN revision: 14896)
DD-WRT login: root
Password:
==========================================================
____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|
DD-WRT v24-sp2
http://www.dd-wrt.com
==========================================================
BusyBox v1.13.4 (2010-08-07 06:53:22 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@DD-WRT:~# dmesg
<5>Linux version 2.6.24.111 (root@dd-wrt) (gcc version 4.3.3 (GCC) ) #3413 Sat Aug 7 06:49:52 CEST 2010
<4>flash_size passed from bootloader = 8
<4>CPU revision is: 00019374
<6>booting platform Atheros AR9132 rev 2 (0xb9)
<4>Determined physical RAM map:
<4> memory: 02000000 @ 00000000 (usable)
<7>On node 0 totalpages: 8192
<7> Normal zone: 64 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 8128 pages, LIFO batch:0
<7> Movable zone: 0 pages used for memmap
<4>Built 1 zonelists in Zone order. Total pages: 8128
<5>Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<4>Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
<4>Primary data cache 32kB, 4-way, linesize 32 bytes.
<6>Synthesized TLB refill handler (20 instructions).
<6>Synthesized TLB load handler fastpath (32 instructions).
<6>Synthesized TLB store handler fastpath (32 instructions).
<6>Synthesized TLB modify handler fastpath (31 instructions).
<6>Cache parity protection disabled
<4>PID hash table entries: 128 (order: 7, 512 bytes)
<4>Using 200.000 MHz high precision timer.
<6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>Memory: 29660k/32768k available (1991k kernel code, 3108k reserved, 312k data, 112k init, 0k highmem)
<7>Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
<4>Mount-cache hash table entries: 512
<6>NET: Registered protocol family 16
<6>Generic PHY: Registered new driver
<6>NET: Registered protocol family 2
<6>Time: MIPS clocksource has been installed.
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP: Hash tables configured (established 1024 bind 1024)
<6>TCP reno registered
<5>gpio_proc: module loaded and /proc/gpio/ created
<4>AR7100 GPIOC major 0
<6>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
<6>console [ttyS0] enabled
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>MPPE/MPPC encryption/compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>IMQ starting with 2 devices...
<6>IMQ driver loaded successfully.
<6> Hooking IMQ before NAT on PREROUTING.
<6> Hooking IMQ after NAT on POSTROUTING.
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<0>guessed flashsize = 8M
<0>scanning for root partition
<0>tplink uboot detected
<0>bootloader size = 20000
<0>
<4>found squashfs at 160000
<5>Creating 8 MTD partitions on "ar7100-nor0":
<5>0x00000000-0x00020000 : "RedBoot"
<5>0x00020000-0x007e0000 : "linux"
<5>0x00160000-0x006f0000 : "rootfs"
<5>0x006f0000-0x007e0000 : "ddwrt"
<5>0x007e0000-0x007f0000 : "nvram"
<5>0x007f0000-0x00800000 : "FIS directory"
<5>0x007f0000-0x00800000 : "board_config"
<5>0x00000000-0x00800000 : "fullflash"
<6>Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
<4>GACT probability on
<4>Mirror/redirect action on
<4>Simple TC action Loaded
<4>u32 classifier
<4> Actions configured
<4>Netfilter messages via NETLINK v0.30.
<4>nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
<4>ctnetlink v0.93: registering with nfnetlink.
<6>IPv4 over IPv4 tunneling driver
<6>GRE over IPv4 tunneling driver
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>IPP2P v0.8.2 loading
<5>ClusterIP Version 0.8 loaded successfully
<6>TCP bic registered
<6>TCP cubic registered
<6>TCP westwood registered
<6>TCP highspeed registered
<6>TCP hybla registered
<6>TCP htcp registered
<6>TCP vegas registered
<6>TCP scalable registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Welcome to PF_RING 3.2.1
<4>(C) 2004-06 L.Deri <deri@ntop.org>
<6>NET: Registered protocol family 27
<4>PF_RING: bucket length 128 bytes
<4>PF_RING: ring slots 4096
<4>PF_RING: sample rate 1 [1=no sampling]
<4>PF_RING: capture TX No [RX only]
<4>PF_RING: transparent mode Yes
<4>PF_RING initialized correctly.
<4>PF_RING: registered /proc/net/pf_ring/
<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>All bugs added by David S. Miller <davem@redhat.com>
<0>decode 1f02
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 112k freed
<6>Realtek RTL8366rb: Registered new driver
<5>Realtek RTL8366rb switch driver version 0.1.0
<6>rtl8366rb-smi rtl8366rb-smi: using GPIO pins 18 (SDA) and 19 (SCK)
<6>rtl8366rb-smi rtl8366rb-smi: RTL5937 ver. 3 chip found
<6>rtl8366-smi: probed
<4>rtl8366rb init vlan
<4> [0]phy_abilityAutoNegotiation : 1
<4>[0]phy_abilityHalf_10 : 1
<4>[0]phy_abilityFull_10 : 1
<4>[0]phy_abilityHalf_100 : 1
<4>[0]phy_abilityFull_100 : 1
<4>[0]phy_abilityFull_1000 : 1
<4>[0]phy_abilityFC : 1
<4>[0]phy_abilityAsyFC : 1
<4>[1]phy_abilityAutoNegotiation : 1
<4>[1]phy_abilityHalf_10 : 1
<4>[1]phy_abilityFull_10 : 1
<4>[1]phy_abilityHalf_100 : 1
<4>[1]phy_abilityFull_100 : 1
<4>[1]phy_abilityFull_1000 : 1
<4>[1]phy_abilityFC : 1
<4>[1]phy_abilityAsyFC : 1
<4>[2]phy_abilityAutoNegotiation : 1
<4>[2]phy_abilityHalf_10 : 1
<4>[2]phy_abilityFull_10 : 1
<4>[2]phy_abilityHalf_100 : 1
<4>[2]phy_abilityFull_100 : 1
<4>[2]phy_abilityFull_1000 : 1
<4>[2]phy_abilityFC : 1
<4>[2]phy_abilityAsyFC : 1
<4>[3]phy_abilityAutoNegotiation : 1
<4>[3]phy_abilityHalf_10 : 1
<4>[3]phy_abilityFull_10 : 1
<4>[3]phy_abilityHalf_100 : 1
<4>[3]phy_abilityFull_100 : 1
<4>[3]phy_abilityFull_1000 : 1
<4>[3]phy_abilityFC : 1
<4>[3]phy_abilityAsyFC : 1
<4>[4]phy_abilityAutoNegotiation : 1
<4>[4]phy_abilityHalf_10 : 1
<4>[4]phy_abilityFull_10 : 1
<4>[4]phy_abilityHalf_100 : 1
<4>[4]phy_abilityFull_100 : 1
<4>[4]phy_abilityFull_1000 : 1
<4>[4]phy_abilityFC : 1
<4>[4]phy_abilityAsyFC : 1
<4>rtl8366s_getEthernetPHY fail for 5!!!!
<4>rtl8366s_getEthernetPHY fail for 6!!!!
<4>rtl8366s_getEthernetPHY fail for 7!!!!
<4>rtl8366s_getEthernetPHY fail for 8!!!!
<4>rtl8366s_getEthernetPHY fail for 9!!!!
<4>rtl8366s_getEthernetPHY fail for 10!!!!
<4>rtl8366s_getEthernetPHY fail for 11!!!!
<4>rtl8366s_getEthernetPHY fail for 12!!!!
<4>rtl8366s_getEthernetPHY fail for 13!!!!
<4>rtl8366s_getEthernetPHY fail for 14!!!!
<4>rtl8366s_getEthernetPHY fail for 15!!!!
<4>ag7100_mod: module license 'unspecified' taints kernel.
<4>AG7100: Length per segment 1536
<4>AG7100: Max segments per packet 1
<4>AG7100: Max tx descriptor count 100
<4>AG7100: Max rx descriptor count 252
<4>AG7100: fifo cfg 3 00780008
<4>AG7100CHH: Mac address for unit 0
<4>AG7100CHH: ff:ff:ff:ff:ff:ff
<6>ag7100_mii: probed
<0>phymap is null
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<5>SCSI subsystem initialized
<4>sr_mod: Unknown symbol register_cdrom
<4>sr_mod: Unknown symbol cdrom_ioctl
<4>sr_mod: Unknown symbol cdrom_media_changed
<4>sr_mod: Unknown symbol cdrom_release
<4>sr_mod: Unknown symbol cdrom_open
<4>sr_mod: Unknown symbol unregister_cdrom
<4>sr_mod: Unknown symbol cdrom_number_of_slots
<6>usb 1-1: new high speed USB device using ar71xx-ehci and address 2
<6>Initializing USB Mass Storage driver...
<4>usb 1-1: config 1 has an invalid interface number: 9 but max is 0
<4>usb 1-1: config 1 has no interface number 0
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>usb-storage: device ignored
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<4>ag7100_ring_alloc Allocated 1600 at 0x81c55800
<4>ag7100_ring_alloc Allocated 4032 at 0x813de000
<4>AG7100: cfg1 0x2f cfg2 0x7014
<4>AG7100: unit 0 phy is up...RGMii 1000Mbps full duplex
<4>AG7100: pll reg 0x18050014: 0x1a000000 AG7100: CPU PhaseLockLoop : 0x1050
<4>AG7100: Secondary PhaseLockLoop: 0x1032
<4>AG7100: Ethernet Internal Clock Control: 0x0
<4>AG7100: mii: 0x22
<4>AG7100: cfg1: 0x2f
<4>AG7100: cfg2: 0x7215
<4>AG7100: fcfg_0: 0x1d1f00
<4>AG7100: fcfg_1: 0x7ff0000
<4>AG7100: fcfg_2: 0xfff
<4>AG7100: fcfg_3: 0x7803ff
<4>AG7100: fcfg_4: 0xffff
<4>AG7100: fcfg_5: 0xfefef
<4>AG7100: done cfg2 0x7215 ifctl 0x0 miictrl 0x22
<4>AG7100: LAN Rx Hang Detected 1 times!
<4>Writing 4
<6>ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
<6>ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<6>ath_dfs: Version 2.0.0
<4>Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
<6>wlan: 0.8.4.2 (Atheros/multi-bss)
<6>wlan: mac acl policy registered
<6>ath_rate_atheros: Version 2.0.1
<4>Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<6>ar5416CheckEepromDef: Read Magic = 0xFFFF
<6>EEPROM being read from flash @0xbfff1000
<6>need_swap = False.
<6>Howl Revision ID 0xb9
<4>dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
<4>1Mbps 2Mbps 5.5Mbps 11Mbps
<4>1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4> 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4> 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4> 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>wifi0: mac 20.0 phy 10.2 radio 13.0
<4>wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>wifi0: Use hw queue 8 for CAB traffic
<4>wifi0: Use hw queue 9 for beacons
<4>wifi0: Use hw queue 7 for UAPSD
<6>wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
<3>br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
<6>device br0 entered promiscuous mode
<6>device vlan1 entered promiscuous mode
<6>device eth0 entered promiscuous mode
<6>device vlan2 entered promiscuous mode
<4>
<4> ath_numswbaperbc = 8(1)adj=76800
<6>device ath0 entered promiscuous mode
<6>br0: port 3(ath0) entering learning state
<6>br0: port 2(vlan2) entering learning state
<6>br0: port 1(vlan1) entering learning state
<6>device br0 left promiscuous mode
<6>device br0 entered promiscuous mode
<6>device br0 left promiscuous mode
<6>device br0 entered promiscuous mode
<6>Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
<6>bonding: MII link monitoring set to 100 ms
<6>br0: topology change detected, propagating
<6>br0: port 3(ath0) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 2(vlan2) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 1(vlan1) entering forwarding state
<6>usbcore: registered new interface driver usbserial
<6>drivers/usb/serial/usb-serial.c: USB Serial Driver core
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem
<6>usbcore: registered new interface driver sierra
<6>drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.7.0
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
<6>usb 1-1: USB disconnect, address 2
<6>usb 1-1: new high speed USB device using ar71xx-ehci and address 3
<4>usb 1-1: config 1 has an invalid interface number: 7 but max is 4
<4>usb 1-1: config 1 has no interface number 2
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>sierra 1-1:1.0: Sierra USB modem converter detected
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB0
<6>sierra 1-1:1.1: Sierra USB modem converter detected
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB1
<6>sierra 1-1:1.3: Sierra USB modem converter detected
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB2
<6>sierra 1-1:1.4: Sierra USB modem converter detected
<6>usb 1-1: Sierra USB modem converter now attached to ttyUSB3
<6>etherip: Ethernet over IPv4 tunneling driver
<4>Freeing node: 74:ea:3a:ab:ea:38
<4>ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
root@DD-WRT:~#
root@DD-WRT:~# [J
root@DD-WRT:~# [J
Nawet po ustawieniu PINU na karcie SIM oraz w gui nie mogę się połączyć. Zaraz po włączeniu do zasilania świeci się przez chwilkę niebieska dioda która następnie zmienia kolor na pomarańczowy i miga co 1,5 sekundy
To może stwórz kopię ustawień:Administracja->Kopia ustawień->Kopia zapasowa. Widzę że modem miga tak jak na openwrt czyli inaczej niż byłby podłączony pod PC. Miga co 1,5 sekundy pomarańczowa dioda. Niestety modyfikacja ustawień o których wspominałeś nie pomogła. Mam iPlusa.
eko.one.pl → Posty przez adach
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc