Ok, dzięki za podpowiedz, sprawa teraz jasna
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez norbi771
Ok, dzięki za podpowiedz, sprawa teraz jasna
Najprościej by było fortigate'owi na WAN2 podać publiczny stały IP, pochodzący z łącza mobilnego, wtedy by zadziałało pomimo ograniczeń. Bez takiej możliwości, w obecnym modelu, może być to problematyczne.
Spięty ma być każdy z każdym. Aktualnie tak to działa, gdy działają standardowe łącza WAN (światłowody).
Co do zrobienia tego bez publicznych - to jest niestety bardziej skomplikowane. Sam bym to sobie ogarnął, ale są konkretne wytyczne korporacyjne jak to ma być zrobione (w sensie publicznych IP, itp).
Nie mam wpływu na większość procesu implementacji, a także dostępu do CISCO i wychodzą z tego potworki konfiguracyjne ... taki life :-(
Dzięki za szybką odpowiedź.
Zastanawiam się czy w takiej konfiguracji (NAT i DMZ) uda mi się postawić VPN IPSEC.
Niestety VPNem IPSEC muszą się spiąć 3 punkty:
- CISCO
- FORTIGATE
- FORTIGATE
to mobilne łącze backup chcę podłączyć do Fortigate'ów.
Cześć,
Czy jest możliwe odpalenie mobilnego Internetu na TPLINK MR6400 w funkcji bridge'a?
Chodzi mi o to, że do głównego routera potrzebuję na backup WAN (RJ45) wpiąć internet mobilny **bez NATu**
To bez NATu jest kluczowe.
Mam publiczny stały IP na karcie SIM i muszę mieć możliwość dostania się do głównego routera z zewnątrz poprzez zestawione połączenie mobilne, wpięte w interfejs backup WAN.
Chciałbym to rozwiązać przy pomocy OpenWrt i rzeczonego TPLINKa.
Da się?
Czy np ten wątek - https://eko.one.pl/forum/post.php?tid=1 … qid=141071 - jest właściwym kierunkiem?
Pozdrawiam
Norbert
Dziękuję.
W końcu miałem możliwość wrócenia do tematu i działa :-)
ok, dzięki
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.000000] Linux version 5.10.166 (cezary@eko.one.pl) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19162-a036c1d43b) 11.2.0, GNU ld (
GNU Binutils) 2.37) #0 Thu Feb 9 08:37:35 2023
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Board has DDR2
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Analog PMU set to hw control
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Digital PMU set to hw control
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] printk: bootconsole [early0] enabled
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] MIPS: machine is TP-Link TL-MR6400 v5
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Zone ranges:
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Movable zone start for each node
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Early memory node ranges
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.000000] Normal zone: 144 pages used for memmap
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Writing ErrCtl register=00040000
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Readback ErrCtl register=00040000
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] Memory: 56352K/65536K available (5697K kernel code, 616K rwdata, 696K rodata, 1236K init, 210K bss, 9184K reserved, 0K cma-reserved
)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] NR_IRQS: 256
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] intc: using register map from devicetree
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] CPU Clock: 580MHz
Thu Feb 9 09:37:49 2023 kern.crit kernel: [ 0.000000] timer_probe: no matching timers found
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.007646] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.073573] pid_max: default: 32768 minimum: 301
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.078212] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.085230] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.095153] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.106498] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.116015] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.122658] pinctrl core: initialized pinctrl subsystem
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.132750] NET: Registered protocol family 16
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.137880] thermal_sys: Registered thermal governor 'step_wise'
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.201929] clocksource: Switched to clocksource MIPS
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.214003] NET: Registered protocol family 2
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.218469] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.226411] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.234578] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.241958] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.248736] TCP: Hash tables configured (established 1024 bind 1024)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.255048] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.261341] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.268437] NET: Registered protocol family 1
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.272671] PCI: CLS 0 bytes, default 32
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.284193] workingset: timestamp_bits=14 max_order=14 bucket_order=0
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.295688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.301270] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.313070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.322784] mt7621_gpio 10000600.gpio: registering 32 gpios
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.328385] mt7621_gpio 10000600.gpio: registering 32 gpios
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.334081] mt7621_gpio 10000600.gpio: registering 32 gpios
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.339696] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.348613] printk: console [ttyS0] disabled
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.352853] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.361567] printk: console [ttyS0] enabled
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.370001] printk: bootconsole [early0] disabled
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.380978] spi-mt7621 10000b00.spi: sys_freq: 193333333
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.406055] spi-nor spi0.0: en25qh64 (8192 Kbytes)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.410987] 4 fixed-partitions partitions found on MTD device spi0.0
Thu Feb 9 09:37:49 2023 kern.err kernel: [ 0.417569] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Thu Feb 9 09:37:49 2023 kern.err kernel: [ 0.425018] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Thu Feb 9 09:37:49 2023 kern.err kernel: [ 0.432838] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Thu Feb 9 09:37:49 2023 kern.err kernel: [ 0.440272] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.448365] Creating 4 MTD partitions on "spi0.0":
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.453296] 0x000000000000-0x000000020000 : "boot"
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.462343] 0x000000020000-0x0000007c0000 : "firmware"
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.469311] 2 tplink-fw partitions found on MTD device firmware
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.475421] Creating 2 MTD partitions on "firmware":
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.480461] 0x000000000000-0x00000021af39 : "kernel"
Thu Feb 9 09:37:49 2023 kern.warn kernel: [ 0.485504] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.496939] 0x00000021af3c-0x0000007a0000 : "rootfs"
Thu Feb 9 09:37:49 2023 kern.warn kernel: [ 0.502064] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.512653] mtd: setting mtd3 (rootfs) as root device
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.518882] 1 squashfs-split partitions found on MTD device rootfs
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.525248] 0x000000760000-0x0000007a0000 : "rootfs_data"
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.532095] 0x0000007c0000-0x0000007d0000 : "config"
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 0.540140] 0x0000007d0000-0x000000800000 : "factory"
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.600397] rt3050-esw 10110000.esw: mediatek esw at 0xb0110000, irq 25 initialized
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.609089] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.619410] NET: Registered protocol family 10
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.629951] Segment Routing with IPv6
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.633895] NET: Registered protocol family 17
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.638498] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this
.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.651674] 8021q: 802.1Q VLAN Support v1.8
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.671586] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.685796] Freeing unused kernel memory: 1236K
Thu Feb 9 09:37:49 2023 kern.warn kernel: [ 0.690392] This architecture does not have kernel memory protection.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 0.696964] Run /sbin/init as init process
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.701110] with arguments:
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.701115] /sbin/init
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.701120] with environment:
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.701125] HOME=/
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 0.701130] TERM=linux
Thu Feb 9 09:37:49 2023 user.info kernel: [ 1.833717] init: Console is alive
Thu Feb 9 09:37:49 2023 user.info kernel: [ 1.837781] init: - watchdog -
Thu Feb 9 09:37:49 2023 user.info kernel: [ 3.705433] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.712420] rt3050-esw 10110000.esw: port 1 link up
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.801789] usbcore: registered new interface driver usbfs
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.807536] usbcore: registered new interface driver hub
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.813070] usbcore: registered new device driver usb
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.826572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.836922] fsl-ehci: Freescale EHCI Host controller driver
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.844745] ehci-platform: EHCI generic platform driver
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.860550] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.867375] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.872684] ehci-platform 101c0000.ehci: EHCI Host Controller
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.878537] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.886741] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.921959] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.929472] hub 1-0:1.0: USB hub found
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.934280] hub 1-0:1.0: 1 port detected
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.946753] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.954818] ohci-platform: OHCI generic platform driver
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.960529] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.967538] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 3.975737] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 4.057031] hub 2-0:1.0: USB hub found
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 4.061756] hub 2-0:1.0: 1 port detected
Thu Feb 9 09:37:49 2023 user.info kernel: [ 4.076171] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Feb 9 09:37:49 2023 user.info kernel: [ 4.094234] init: - preinit -
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 4.120335] rt3050-esw 10110000.esw: port 3 link up
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 4.242152] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 5.114002] rt3050-esw 10110000.esw: port 1 link down
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 5.225872] random: procd: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 6.101878] random: jshn: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 6.215725] random: jshn: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 6.393425] random: jshn: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 6.461864] random: jshn: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 6.617228] random: jshn: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 7.180326] rt3050-esw 10110000.esw: port 3 link down
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 10.700333] rt3050-esw 10110000.esw: port 3 link up
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 10.705367] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 10.712359] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 11.628078] rt3050-esw 10110000.esw: port 1 link up
Thu Feb 9 09:37:49 2023 user.notice kernel: [ 11.768353] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Thu Feb 9 09:37:49 2023 user.warn kernel: [ 11.780234] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Feb 9 09:37:49 2023 user.info kernel: [ 11.975953] procd: - early -
Thu Feb 9 09:37:49 2023 user.info kernel: [ 11.979331] procd: - watchdog -
Thu Feb 9 09:37:49 2023 user.info kernel: [ 12.954863] procd: - watchdog -
Thu Feb 9 09:37:49 2023 user.info kernel: [ 13.015880] procd: - ubus -
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 13.288053] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 13.297544] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 13.304821] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 user.info kernel: [ 13.327837] procd: - init -
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 14.769654] random: jshn: uninitialized urandom read (4 bytes read)
Thu Feb 9 09:37:49 2023 user.info kernel: [ 15.094186] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Feb 9 09:37:49 2023 user.info kernel: [ 15.723787] urngd: v1.0.2 started.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 15.768494] tun: Universal TUN/TAP device driver, 1.6
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 15.833586] usbcore: registered new interface driver cdc_wdm
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 15.854825] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 15.862594] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 15.955565] usbcore: registered new interface driver usbserial_generic
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 15.962375] usbserial: USB Serial support registered for generic
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 16.483109] random: crng init done
Thu Feb 9 09:37:49 2023 kern.notice kernel: [ 16.486583] random: 24 urandom warning(s) missed due to ratelimiting
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 16.496628] mt76_wmac 10300000.wmac: ASIC revision: 76280001
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 17.524661] mt76_wmac 10300000.wmac: Firmware Version: 20151201
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 17.530688] mt76_wmac 10300000.wmac: Build Time: 20151201183641
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 17.551929] mt76_wmac 10300000.wmac: firmware init done
Thu Feb 9 09:37:49 2023 kern.debug kernel: [ 17.721869] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.030899] PPP generic driver version 2.4.2
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.039659] NET: Registered protocol family 24
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.048766] qmi_wwan 1-1:1.4: cdc-wdm0: USB WDM device
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.057950] qmi_wwan 1-1:1.4 wwan0: register 'qmi_wwan' at usb-101c0000.ehci-1, WWAN/QMI device, a6:70:88:0f:09:97
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.068931] usbcore: registered new interface driver qmi_wwan
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.237203] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.245228] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.266299] usbcore: registered new interface driver option
Thu Feb 9 09:37:49 2023 kern.info kernel: [ 18.272164] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Feb 9 09:37:49 2023 user.info kernel: [ 18.287737] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Feb 9 09:37:49 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf
Thu Feb 9 09:37:52 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Feb 9 09:37:52 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Feb 9 09:37:52 2023 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-
DNSSEC no-ID loop-detect inotify dumpfile
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Feb 9 09:37:54 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Feb 9 09:37:54 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Feb 9 09:38:21 2023 authpriv.info dropbear[1458]: Not backgrounding
Thu Feb 9 09:38:26 2023 daemon.notice wpa_supplicant[1595]: Successfully initialized wpa_supplicant
Thu Feb 9 09:38:26 2023 kern.info kernel: [ 65.490349] rt3050-esw 10110000.esw: port 1 link down
Thu Feb 9 09:38:26 2023 kern.info kernel: [ 65.495495] rt3050-esw 10110000.esw: port 3 link down
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: bonding
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: 8021ad
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: 8021q
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: macvlan
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: veth
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: bridge
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: Network device
Thu Feb 9 09:38:27 2023 user.notice : Added device handler type: tunnel
Thu Feb 9 09:38:30 2023 kern.info kernel: [ 69.075898] rt3050-esw 10110000.esw: port 3 link up
Thu Feb 9 09:38:30 2023 kern.info kernel: [ 69.595069] rt3050-esw 10110000.esw: port 1 link up
Thu Feb 9 09:38:32 2023 user.info adblock-4.1.5[1723]: backup directory '/tmp/adblock-Backup' created
Thu Feb 9 09:38:34 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Thu Feb 9 09:38:34 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Thu Feb 9 09:38:34 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Thu Feb 9 09:38:34 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Thu Feb 9 09:38:34 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Thu Feb 9 09:38:34 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Thu Feb 9 09:38:35 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Thu Feb 9 09:38:36 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Feb 9 09:38:36 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Feb 9 09:38:36 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Thu Feb 9 09:38:36 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Thu Feb 9 09:38:39 2023 daemon.err mount_root: failed - mount -t jffs2 /dev/mtdblock4 /rom/overlay: Not a tty
Thu Feb 9 09:38:39 2023 kern.err kernel: [ 78.174160] Too few erase blocks (4)
Thu Feb 9 09:38:39 2023 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Thu Feb 9 09:38:39 2023 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Thu Feb 9 09:38:40 2023 kern.info kernel: [ 78.971438] br-lan: port 1(eth0.1) entered blocking state
Thu Feb 9 09:38:40 2023 kern.info kernel: [ 78.977019] br-lan: port 1(eth0.1) entered disabled state
Thu Feb 9 09:38:40 2023 kern.info kernel: [ 78.982919] device eth0.1 entered promiscuous mode
Thu Feb 9 09:38:40 2023 kern.info kernel: [ 78.987785] device eth0 entered promiscuous mode
Thu Feb 9 09:38:40 2023 kern.info kernel: [ 79.024777] br-lan: port 1(eth0.1) entered blocking state
Thu Feb 9 09:38:40 2023 kern.info kernel: [ 79.030276] br-lan: port 1(eth0.1) entered forwarding state
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'lan' is enabled
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'lan' is setting up now
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'lan' is now up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: bridge 'br-lan' link is up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Feb 9 09:38:40 2023 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'loopback' is enabled
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'loopback' is now up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'wan' is enabled
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'wan6' is enabled
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Network device 'eth0' link is up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Network device 'lo' link is up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Feb 9 09:38:40 2023 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'wan' is setting up now
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Feb 9 09:38:40 2023 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Feb 9 09:38:41 2023 kern.info kernel: [ 79.942463] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Feb 9 09:38:41 2023 daemon.err odhcpd[1790]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Feb 9 09:38:41 2023 daemon.notice netifd: wan (2647): udhcpc: started, v1.35.0
Thu Feb 9 09:38:41 2023 daemon.err odhcp6c[2649]: Failed to send RS (Address not available)
Thu Feb 9 09:38:43 2023 daemon.notice netifd: wan (2647): udhcpc: broadcasting discover
Thu Feb 9 09:38:43 2023 daemon.info procd: - init complete -
Thu Feb 9 09:38:43 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Feb 9 09:38:44 2023 daemon.notice netifd: wan (2647): udhcpc: broadcasting select for 10.100.101.137, server 10.100.101.254
Thu Feb 9 09:38:44 2023 daemon.notice netifd: wan (2647): udhcpc: lease of 10.100.101.137 obtained from 10.100.101.254, lease time 7200
Thu Feb 9 09:38:44 2023 daemon.info urandom_seed[2751]: Seed saved (/etc/urandom.seed)
Thu Feb 9 09:38:45 2023 daemon.notice netifd: Interface 'wan' is now up
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-
DNSSEC no-ID loop-detect inotify dumpfile
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using nameserver 10.100.101.254#53
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Feb 9 09:38:45 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Feb 9 09:38:46 2023 user.info adblock-4.1.5[1723]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Fri Mar 17 13:35:54 2023 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Fri Mar 17 13:35:55 2023 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) e4:b9:7a:55:94:cb
Fri Mar 17 13:35:55 2023 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.105 e4:b9:7a:55:94:cb
Fri Mar 17 13:35:55 2023 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.1.105 e4:b9:7a:55:94:cb
Fri Mar 17 13:35:55 2023 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.1.105 e4:b9:7a:55:94:cb NNL7390
Fri Mar 17 13:35:57 2023 user.notice ddns-scripts[3280]: myddns_ipv4: PID '3280' started at 2023-03-17 13:35
Fri Mar 17 13:35:58 2023 user.warn ddns-scripts[3280]: myddns_ipv4: Service section disabled! - TERMINATE
Fri Mar 17 13:35:58 2023 user.warn ddns-scripts[3280]: myddns_ipv4: PID '3280' exit WITH ERROR '1' at 2023-03-17 13:35
Fri Mar 17 13:36:10 2023 authpriv.info dropbear[3393]: Child connection from 192.168.1.105:56348
Fri Mar 17 13:36:16 2023 authpriv.notice dropbear[3393]: Auth succeeded with blank password for 'root' from 192.168.1.105:56348
Fri Mar 17 13:36:37 2023 kern.info kernel: [ 133.936068] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. U
se the iptables CT target to attach helpers instead.
Fri Mar 17 14:24:11 2023 authpriv.info dropbear[3716]: Child connection from 192.168.1.105:56419
Fri Mar 17 14:24:13 2023 authpriv.notice dropbear[3716]: Auth succeeded with blank password for 'root' from 192.168.1.105:56419root@OpenWrt:~# firstboot
This will erase all settings and remove any installed packages. Are you sure? [N/y]
y
/dev/mtdblock4 is not mounted
/dev/mtdblock4 will be erased on next mount
root@OpenWrt:~# reboot
root@OpenWrt:~#
login as: root
....
BusyBox v1.35.0 (2022-11-10 13:49:50 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| |
| OpenWrt 22.03-SNAPSHOT, r20060-f7541aecdc |
...
root@OpenWrt:~# sysupgrade -n https://dl.eko.one.pl/luci/openwrt-22.03/ramips/mt76x8/luci-22.03-snapshot-r20060-f7541aec
dc-ramips-mt76x8-tplink_tl-mr6400-v5-squashfs-sysupgrade.bin
Downloading 'https://dl.eko.one.pl/luci/openwrt-22.03/ramips/mt76x8/luci-22.03-snapshot-r20060-f7541aecdc-ramips-mt76x8-tplink_tl-mr6400-v5-squashfs-sysupgrade.bin'
Connecting to 95.160.100.110:443
Writing to '/tmp/sysupgrade.img'
/tmp/sysupgrade.img 100% |*******************************| 7552k 0:00:00 ETA
Download completed (7734070 bytes)
Fri Mar 17 13:25:59 CET 2023 upgrade: Commencing upgrade. Closing all shell sessions.
Command failed: Connection failed
root@OpenWrt:~#wgrywa obraz i restaruje sie po okolo 1min, a wcześniej miga ikonka włączania
po kilku minutach podnosi się
po restarcie
root@OpenWrt:~#
login as: root
BusyBox v1.35.0 (2022-11-10 13:49:50 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| |
| OpenWrt 22.03-SNAPSHOT, r20060-f7541aecdc |
| |
| Build time: 2023-02-11 09:05 CET |
| Cezary Jackiewicz, https://eko.one.pl |
| |
....
root@OpenWrt:~# passwd
Changing password for root
New password:
Retype password:
passwd: password for root changed by root
root@OpenWrt:~# rebooti po podniesieniu się routera po reboocie logowanie jest bez hasła
Cześć,
pisałem już kiedyś o tym, ale skupiłem się na modemie i chyba źle przyjąłem że config się zapisał
Mam wgrany najnowszy obraz do MR6400 v5.
Niestety nie mogę zapisać na nim konfiguracji, ani hasła root.
Odłożyłem ten temat na trochę czekając na jakąś aktualizację.
Aktualizacja od jakiegoś czasu jest dostępna, wgrałem ją, ale to nie rozwiązało problemu.
Czy robię coś niewłaściwie?
Czy ten router nie ma pamięci, żeby pomieścić zapisanie hasła lub podstawową konfigurację?
robiłem m.in.
firstboot
sysupgrade -n
Nic nie pomaga.
Poniżej wynik mount i df -h
Proszę o podpowiedź co jest źle?
Dziękuję
root@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
overlayfs:/tmp/root on / type overlay (rw,noatime,lowerdir=/,upperdir=/tmp/root/upper,workdir=/tmp/root/work)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
none on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.5M 5.5M 0 100% /rom
tmpfs 28.1M 84.0K 28.0M 0% /tmp
tmpfs 28.1M 108.0K 28.0M 0% /tmp/root
overlayfs:/tmp/root 28.1M 108.0K 28.0M 0% /
tmpfs 512.0K 0 512.0K 0% /devprzepraszam, nie było tematu, to mój błąd, i dziękuję za super szybką pomoc
skupilem się na urządzeniu, a qmi widoczne jest na liście protokołów
sorry, to chyba mój bład
root@OpenWrt:~# cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.04
S: Manufacturer=Linux 5.4.219 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=101c0000.ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05c6 ProdID=9025 Rev= 3.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=6a128680
C:* #Ifs= 9 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 6 IfCount= 3 Cls=01(audio) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
I:* If#= 6 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 7 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I: If#= 7 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=8a(I) Atr=05(Isoc) MxPS= 16 Ivl=1ms
I:* If#= 8 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I: If#= 8 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=07(O) Atr=09(Isoc) MxPS= 16 Ivl=1ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 5.04
S: Manufacturer=Linux 5.4.219 ohci_hcd
S: Product=Generic Platform OHCI controller
S: SerialNumber=101c1000.ohci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255msdokladnie tym:
http://dl.eko.one.pl/luci/openwrt-21.02 … pgrade.bin
Dzięki, zrobiłem firstboota, ale nie pomogło. Chyba za mało pamięci było, aby zapisać te ustawienia.
Zrobiłem sysupgrade -n i miejsce się zwolniło, hasło mogę zapisać więc pozostałe rzeczy też ... ale nie ma róży bez kolców.
Usiłuję na tym routerze odpalić obsługę wbudowanego modemu LTE. Niestety nie chce to teraz działać.
Po tym sysupgrade nie mogę zobaczyć interfejsu uqmi, a on jest z tego co rozumiem wymagany by ten router z wbudowanym LTE zadziałał.
Czy możesz mi podpowiedzieć jak do tego podejść?
Cześć,
Po zainstalowaniu Luci na TL-MR6400 v5 wszystko mogę skonfigurować poprawnie, zapisuję konfigurację, itd.
Niestety po reboocie router kompletnie nie pamięta ustawień.
Coś źle wgrałem, czy o czymś zapomniałem?
Witam,
Pyt 1.
Mój stary MR3420 się sypie, bardzo często zrywa połączenia, dziwnie się zachowuje i działa bardzo niestabilnie (kiedyś było dużo lepiej, reinstalowałem wszystko, ale nie pomaga, skłaniam się więc do stwierdzenia że to jednak problem hardware).
Przyszedł czas na zmianę. Potrzebuję sprzętu w miarę nowego technologicznie, który będzie pracował jako router wifi, switch, okresowo pozwoli na podłączenie na usb modemu LTE i oczywiście da się na niego wgrać najnowsze Gargoyle / OpenWRT. Raczej nie zależy mi na podłączaniu dysku zewnętrznego, itp.
Jeszcze zanim mój MR3420 zaczął mocno wariować to mimo wzmocnienia anten nie udało mi się doprowadzić stabilnego sygnału do wszystkich pomieszczeń w których chciałbym mieć wifi. Dlatego przy wymianie sprzętu najistotniejsze jest dla mnie stabilne i mocne Wifi (aktualnie wszystkie sprzęty mam na 2,4GHz).
Czy możecie polecić coś w budżecie ~ do 500 PLN?
Nie wykluczam większego wydatku jeśli będzie ku temu uzasadnienie.
----------
Pyt 2.
Czy możecie polecić jakieś punkty dostępowe Wifi, które obsłużą stabilnie 15-20 jednoczesnych userów?
Dzięki za podpowiedzi
obawiam się że nie w tej wersji, nie mam takiego pakietu, a jak próbuję doinstalować to nie starcza miejsca.
Witam,
Aktualnie posiadam TL-3420 v1. Działa na tym bardzo fajnie Gargoyle.
Potrzebuję jednak na stałe zestawić połączenie OpenVPN poprzez instalację klienta OpenVPNowego i chciałbym spróbować zrobić to przy pomocy OpenWRT.
Pewne jest to, że mój TL-3420 ma za mało pamięci na instalację czegokolwiek.
Gargoyle PL 1.6.2.1 (b70bfc1)
OpenWrt Attitude Adjustment 12.09.1 (r42171)
Build time: 2014-08-27 19:50 CEST
Flash: total: 320KB, free: 80KB, used: 75%
Memory: total: 28.5MB, free: 15.3MB, used: 46%
Szukam więc alternatywnego rozwiązania (ext-roota chciałbym pominąć).
Czy mogę prosić o polecenie aktualnie sensownego sprzętu do ~300 PLN + VAT, oczywiście może być tańszy, na którym będę mógł zainstalować Gargoyle + OpenVPN lub Luci + OpenVPN. Ostatecznym rozwiązaniem jest instalacja gołego OpenWRT + OpenWRT, wtedy powinno mi wystarczyć miejsca nawet na nowym MR3420, ale może jest coś lepszego co mogę wybrać.
Szukałem w necie, ale w specyfikacjach nie znajduję ilości pamięci i nie chcę się naciąć.
Będę wdzięczny za polecenie jakiegoś urządzenia (może być bez WiFi)
Pozdrawiam
Norbert
Witam ponownie,
Mam taki problem.
Łącze DSL 128kbps z TPSa oraz 3G z PLUSa + MR3420.
Gargoyle skonfigurowany tak, że stara się podnieść w cronie to połączenie 3G i jeśli mu się uda to robi default route na nim, dzięki czemu cała sieć korzysta z dobrodziejstwa połączenia 3G.
Potrzebuję z zewnątrz się dostawać do tej sieci która stoi za tym routerkiem, wiem że nie mogę się dostać tam przez połączenie 3G, bo dostawcy blokują taką możliwość, OK rozumiem to, chciałbym się podłączać do tego łącza TPSA, no i tu się zaczyna problem.
Jeśli 3g NIE jest podniesione, to SSH na DSLa dziala mi bez problemu, natomiast jak 3G się podniesie nie mogę się już dostać do tego routera wykonując SSH na adres DSLa.
Nie bardzo rozumiem skąd ten problem.
Proszę o podpowiedź jak go rozwiązać.
Z góry dzięki
Norbert
Dzięki za odpowiedź.
Czy przewidujesz jakąś aktualizację gargoyle niebawem? I czy ew. uwzględni ona naprawę opisanego problemu z pptp?
Model: TP-LINK TL-MR3420
Nazwa urządzenia:router
Wersja Gargoyle:1.5.6 (r33081), by obsy celowo zainstalowalem go jeszcze raz, ale pptp nie dziala
jak zainstalowalem obraz backfire to pptp poszlo,
z powyższego wnioskuję że skopane cos jest w aktualnej wersji gargoyle
$ opkg install kmod-ipt-nathelper-extra
#logread
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_proto_gre: Unknown symbol nf_ct_port_nlattr_tuple_size
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_proto_gre: Unknown symbol nf_ct_port_nla_policy
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_proto_gre: Unknown symbol nf_ct_port_tuple_to_nlattr
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_proto_gre: Unknown symbol nf_ct_port_nlattr_to_tuple
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_proto_gre: Unknown symbol nf_nat_proto_nlattr_to_range
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_proto_gre: Unknown symbol nf_nat_proto_range_to_nlattr
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_pptp: Unknown symbol nf_ct_gre_keymap_destroy
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_pptp: Unknown symbol nf_ct_gre_keymap_flush
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_conntrack_pptp: Unknown symbol nf_ct_gre_keymap_add
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_pptp: Unknown symbol nf_nat_pptp_hook_exp_gre
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_pptp: Unknown symbol nf_nat_pptp_hook_inbound
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_pptp: Unknown symbol nf_nat_pptp_hook_outbound
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_pptp: Unknown symbol nf_nat_pptp_hook_expectfn
Oct 4 21:52:09 Gargoyle user.warn kernel: nf_nat_pptp: Unknown symbol nf_nat_need_greczy dobrze rozumiem, ze kmod-ipt-nathelper-extra ma problem z nf_nat_gree i pptp?
i powinienem to ladowac wlasnie w ten sposób jak to robię, ale widocznie cos jest nie tak skompilowane i to nie działa?
zrobilem firstboota, próbuje jeszcze raz
eko.one.pl → Posty przez norbi771
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc