FAQ o OpenWrt | Sprzedam różne routery | Oddam

2023-06-29 14:57:15

stich86 napisał/a:

...

Hello stich86. Do you know if the MF289 router supports the MBIM protocol? According to the bootlog you uploaded to MEGA, the integrated modem supports 'cdc_wdm' and 'cdc_ether'. Also the proprietary QMI protocol. I think it is possible to switch from QMI to MBMI. But although I've already read for hours, I unfortunately couldn't figure out how this could be done (?).

I have read many of your posts on eko.one.pl and fibra.click. Thank you for the many technical insights into the two ZTE routers.

2023-06-28 17:25:22

Ale musisz mieć antenę podłączoną do modemu ZTE, prawda? (Tłumacz Google)

https://www.berrybase.de/media/image/60 … 5_orig.jpg

2023-06-28 16:03:41

rybirek napisał/a:

Wyjąłem modem, włożyłem do przejściówki na USB i pod linuxem (qmi) uzyskałem na improwizowanych antenach.

Hello. I'm amazed at the results of your speed test. May I know which antennas you used?

I want to use the ZTE modem with a Mikrotik router. Has someone already tried this? Mikrotik does not support QMI. The ZTE modem would then have to be switched to MBIM mode?

Otherwise I would have to buy an old ThinClient or a Raspberry PI. On Debian Linux the ZTE modem seems to work fine, doesn't it?

2023-06-28 10:42:11

Hello. I have this Vodafone router:

ZTE - MF 289 F

I would like to remove the Mini PCI-E modem from the ZTE router and connect it to a Mikrotik router or Raspberry PI along with the 4G antennas. This seems to be possible with a Mini PCI-E to USB adapter.

Mikrotik Router: Has anyone tried this and maybe knows how to get the ZTE modem into MBIM mode? From what I've read, the modem's default QMI mode isn't supported by RouterOS.

Raspberry PI: Linux seems to have good support for Qualcomm LTE modems and also for QMI mode. Maybe someone has experience? Thank you for any information and tips.

2020-12-15 10:45:44

max-bit napisał/a:

Zrobiłem tak jak jest podane wyżej ....
Czyli mam zainstalowane opkg install wpad-basic-wolfssl libwolfssl ca-bundle
I tu jest OK ?
Nie instalowałem opkg install wpad-openssl libopenssl ca-bundle (no bo jest to wyżej)
I faktycznie dziwne bo nie ma eap-a ???

U mnie pomogło dopiero zainstalowanie wpad-wolfssl Wygląda na to, że wersja "basic" nie ma EAPa.

2019-04-08 16:38:23

Już to zmieniłem ale nadal nie działa

2019-04-08 13:42:12

nslookup google.pl

Server: LEDE.lan
Address: fdcc:6bb4:eace::1

DNS request timed out.
timeout was 2 seconds.
DNS request timed out.
timeout was 2 seconds.
*** Request to LEDE.lan timed-out

2019-04-05 08:15:54

tzn na początku ip pozostawało takie samo. Teraz zauważyłem że po uruchomieniu wywala błąd dns w systemie. Ręczne wpisanie dns vpna nic nie daje, 8.8.8.8 w cmd tez nie mogę zpingować

na vpnie teraz zauważyłem linijke
DNS Settings (Advanced)
Some devices like some consumer routers do not accept server pushed DNS settings. If this is the case, configure your DNS manually to 10.255.255.1
Keep in mind, this is an internal IPs, and will not work when you're not connected to Windscribe.

w network/interfaces vpn (tun0) cały czas RX: 0 B (0 Pkts.) a tylko TX rośnie

2019-04-05 02:00:07

Wydaje mi się ze to może być problem z dns
Znalazłem coś takiego

FIX to use DNS provided by OpenVPN server:
cat<<'EOF' > /etc/openvpn/updns #!/bin/sh mv /tmp/resolv.conf.auto /tmp/resolv.conf.auto.hold echo $foreign_option_1 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' >/tmp/resolv.conf.auto echo $foreign_option_2 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' >> /tmp/resolv.conf.auto echo $foreign_option_3 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' >> /tmp/resolv.conf.auto EOF cat<<'EOF' > /etc/openvpn/downdns #!/bin/sh mv /tmp/resolv.conf.auto.hold /tmp/resolv.conf.auto EOF
add execution permission to both files:
chmod 755 /etc/openvpn/updns chmod 755 /etc/openvpn/downdns
You should have now two new files (check for it):
ls -l /etc/openvpn/*dns
All Ready!
Since we modified firewall we need to run
/etc/init.d/firewall reload
Since we added a new interface we need to restart network daemon (you will lost connectivity for a moment)
/etc/init.d/network restart

2019-04-04 23:30:00

/var/log/openvpn.log

Fri Apr  5 00:06:19 2019 OpenVPN 2.4.4 mips-openwrt-linux-gnu [SSL (mbed TLS)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD]
Fri Apr  5 00:06:19 2019 library versions: mbed TLS 2.7.5, LZO 2.10
Fri Apr  5 00:06:19 2019 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Fri Apr  5 00:06:19 2019 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Fri Apr  5 00:06:20 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]185.244.214.35:443
Fri Apr  5 00:06:20 2019 UDP link local: (not bound)
Fri Apr  5 00:06:20 2019 UDP link remote: [AF_INET]185.244.214.35:443
Fri Apr  5 00:06:21 2019 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Fri Apr  5 00:06:21 2019 VERIFY OK: depth=1, C=CA, ST=ON, L=Toronto, O=Windscribe Limited, OU=Operations, CN=Windscribe Node CA
Fri Apr  5 00:06:21 2019 Validating certificate key usage
Fri Apr  5 00:06:21 2019 VERIFY KU OK
Fri Apr  5 00:06:21 2019 Validating certificate extended key usage
Fri Apr  5 00:06:21 2019 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Fri Apr  5 00:06:21 2019 VERIFY EKU OK
Fri Apr  5 00:06:21 2019 VERIFY OK: depth=0, C=CA, ST=ON, O=Windscribe Limited, OU=Operations, CN=Windscribe Node Server 4096
Fri Apr  5 00:06:22 2019 Control Channel: TLSv1.2, cipher TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384, 4096 bit key
Fri Apr  5 00:06:22 2019 [Windscribe Node Server 4096] Peer Connection Initiated with [AF_INET]185.244.214.35:443
Fri Apr  5 00:11:11 2019 [Windscribe Node Server 4096] Inactivity timeout (--ping-restart), restarting
Fri Apr  5 00:11:11 2019 SIGUSR1[soft,ping-restart] received, process restarting
Fri Apr  5 00:11:16 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]5.133.8.164:443
Fri Apr  5 00:11:16 2019 UDP link local: (not bound)
Fri Apr  5 00:11:16 2019 UDP link remote: [AF_INET]5.133.8.164:443
Fri Apr  5 00:11:16 2019 VERIFY OK: depth=1, C=CA, ST=ON, L=Toronto, O=Windscribe Limited, OU=Operations, CN=Windscribe Node CA
Fri Apr  5 00:11:16 2019 Validating certificate key usage
Fri Apr  5 00:11:16 2019 VERIFY KU OK
Fri Apr  5 00:11:16 2019 Validating certificate extended key usage
Fri Apr  5 00:11:16 2019 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Fri Apr  5 00:11:16 2019 VERIFY EKU OK
Fri Apr  5 00:11:16 2019 VERIFY OK: depth=0, C=CA, ST=ON, O=Windscribe Limited, OU=Operations, CN=Windscribe Node Server 4096
Fri Apr  5 00:11:17 2019 Control Channel: TLSv1.2, cipher TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384, 4096 bit key
Fri Apr  5 00:11:17 2019 [Windscribe Node Server 4096] Peer Connection Initiated with [AF_INET]5.133.8.164:443
Fri Apr  5 00:11:18 2019 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
Fri Apr  5 00:11:18 2019 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
Fri Apr  5 00:11:18 2019 TUN/TAP device tun0 opened
Fri Apr  5 00:11:18 2019 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Fri Apr  5 00:11:18 2019 /sbin/ifconfig tun0 10.110.190.3 netmask 255.255.254.0 mtu 1500 broadcast 10.110.191.255
Fri Apr  5 00:11:18 2019 Initialization Sequence Completed
Fri Apr  5 02:14:16 2019 [Windscribe Node Server 4096] Inactivity timeout (--ping-restart), restarting
Fri Apr  5 02:14:16 2019 SIGUSR1[soft,ping-restart] received, process restarting
Fri Apr  5 02:14:21 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]5.133.8.164:443
Fri Apr  5 02:14:21 2019 UDP link local: (not bound)
Fri Apr  5 02:14:21 2019 UDP link remote: [AF_INET]5.133.8.164:443
Fri Apr  5 02:15:21 2019 [UNDEF] Inactivity timeout (--ping-restart), restarting
Fri Apr  5 02:15:21 2019 SIGUSR1[soft,ping-restart] received, process restarting
Fri Apr  5 02:15:31 2019 RESOLVE: Cannot resolve host address: pl.windscribe.com:443 (Try again)
Fri Apr  5 02:15:36 2019 RESOLVE: Cannot resolve host address: pl.windscribe.com:443 (Try again)
Fri Apr  5 02:15:36 2019 Could not determine IPv4/IPv6 protocol
Fri Apr  5 02:15:36 2019 SIGUSR1[soft,init_instance] received, process restarting
Fri Apr  5 02:15:46 2019 RESOLVE: Cannot resolve host address: pl.windscribe.com:443 (Try again)
Fri Apr  5 02:15:51 2019 RESOLVE: Cannot resolve host address: pl.windscribe.com:443 (Try again)
Fri Apr  5 02:15:51 2019 Could not determine IPv4/IPv6 protocol
Fri Apr  5 02:15:51 2019 SIGUSR1[soft,init_instance] received, process restarting
Fri Apr  5 02:16:01 2019 RESOLVE: Cannot resolve host address: pl.windscribe.com:443 (Try again)
Fri Apr  5 02:16:06 2019 RESOLVE: Cannot resolve host address: pl.windscribe.com:443 (Try again)
Fri Apr  5 02:16:06 2019 Could not determine IPv4/IPv6 protocol
Fri Apr  5 02:16:06 2019 SIGUSR1[soft,init_instance] received, process restarting

syslog

Fri Apr  5 02:06:06 2019 user.notice : Added device handler type: 8021ad
Fri Apr  5 02:06:06 2019 user.notice : Added device handler type: 8021q
Fri Apr  5 02:06:06 2019 user.notice : Added device handler type: macvlan
Fri Apr  5 02:06:06 2019 user.notice : Added device handler type: bridge
Fri Apr  5 02:06:06 2019 user.notice : Added device handler type: Network device
Fri Apr  5 02:06:06 2019 user.notice : Added device handler type: tunnel
Fri Apr  5 02:06:07 2019 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Fri Apr  5 02:06:07 2019 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Fri Apr  5 02:06:10 2019 authpriv.info dropbear[783]: Not backgrounding
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'lan' is enabled
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'lan' is setting up now
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'lan' is now up
Fri Apr  5 02:06:14 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records in
Fri Apr  5 02:06:14 2019 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records out
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'loopback' is enabled
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'loopback' is now up
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'wan' is enabled
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'wan6' is enabled
Fri Apr  5 02:06:14 2019 daemon.info odhcpd[747]: Raising SIGUSR1 due to address change on br-lan
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Network device 'lo' link is up
Fri Apr  5 02:06:14 2019 daemon.notice netifd: Interface 'loopback' has link connectivity 
Fri Apr  5 02:06:15 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:06:15 2019 daemon.notice odhcpd[747]: Failed to send to ff02::1%br-lan (Address not available)
Fri Apr  5 02:06:15 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Apr  5 02:06:16 2019 daemon.notice netifd: Network device 'eth0' link is up
Fri Apr  5 02:06:16 2019 daemon.notice netifd: bridge 'br-lan' link is up
Fri Apr  5 02:06:16 2019 daemon.notice netifd: Interface 'lan' has link connectivity 
Fri Apr  5 02:06:16 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:06:16 2019 daemon.notice odhcpd[747]: Failed to send to fe80::1118:6438:cc57:4918%br-lan (Address not available)
Fri Apr  5 02:06:17 2019 daemon.notice netifd: Network device 'eth1' link is up
Fri Apr  5 02:06:17 2019 daemon.notice netifd: Interface 'wan' has link connectivity 
Fri Apr  5 02:06:17 2019 daemon.notice netifd: Interface 'wan' is setting up now
Fri Apr  5 02:06:17 2019 daemon.notice netifd: Interface 'wan6' has link connectivity 
Fri Apr  5 02:06:17 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Fri Apr  5 02:06:17 2019 daemon.notice odhcpd[747]: Got DHCPv6 request
Fri Apr  5 02:06:17 2019 daemon.warn odhcpd[747]: DHCPV6 SOLICIT IA_NA from 0001000123a30641d8cb8aebe685 on br-lan: ok fdcc:6bb4:eace::9e4/128 
Fri Apr  5 02:06:17 2019 daemon.notice odhcpd[747]: Failed to send to fe80::1118:6438:cc57:4918%br-lan (Address not available)
Fri Apr  5 02:06:17 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:06:17 2019 daemon.notice odhcpd[747]: Failed to send to ff02::1%br-lan (Address not available)
Fri Apr  5 02:06:17 2019 daemon.notice netifd: wan (1077): udhcpc: started, v1.25.1
Fri Apr  5 02:06:19 2019 daemon.notice netifd: wan (1077): udhcpc: sending discover
Fri Apr  5 02:06:19 2019 daemon.notice netifd: wan (1077): udhcpc: sending select for 192.168.1.19
Fri Apr  5 02:06:19 2019 daemon.notice odhcpd[747]: Got DHCPv6 request
Fri Apr  5 02:06:19 2019 daemon.warn odhcpd[747]: DHCPV6 SOLICIT IA_NA from 0001000123a30641d8cb8aebe685 on br-lan: ok fdcc:6bb4:eace::9e4/128 
Fri Apr  5 02:06:19 2019 daemon.notice odhcpd[747]: Got DHCPv6 request
Fri Apr  5 02:06:19 2019 daemon.warn odhcpd[747]: DHCPV6 REQUEST IA_NA from 0001000123a30641d8cb8aebe685 on br-lan: ok fdcc:6bb4:eace::9e4/128 
Fri Apr  5 02:06:19 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN
Fri Apr  5 02:06:19 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN1
Fri Apr  5 02:06:20 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN2
Fri Apr  5 02:06:20 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN3
Fri Apr  5 02:06:20 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN4
Fri Apr  5 02:06:20 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN
Fri Apr  5 02:06:20 2019 daemon.notice netifd: wan (1077): udhcpc: lease of 192.168.1.19 obtained, lease time 3600
Fri Apr  5 02:06:20 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:06:20 2019 daemon.notice netifd: Interface 'wan' is now up
Fri Apr  5 02:06:21 2019 daemon.notice odhcpd[747]: Got DHCPv6 request
Fri Apr  5 02:06:21 2019 daemon.warn odhcpd[747]: DHCPV6 CONFIRM IA_NA from 0001000123a30641d8cb8aebe685 on br-lan: not on-link fdcc:6bb4:eace::9e4/128 
Fri Apr  5 02:06:21 2019 daemon.notice odhcpd[747]: Got DHCPv6 request
Fri Apr  5 02:06:21 2019 daemon.warn odhcpd[747]: DHCPV6 SOLICIT IA_NA from 0001000123a30641d8cb8aebe685 on br-lan: ok fdcc:6bb4:eace::9e4/128 
Fri Apr  5 02:06:21 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:06:22 2019 daemon.info procd: - init complete -
Fri Apr  5 02:06:22 2019 daemon.notice odhcpd[747]: Got DHCPv6 request
Fri Apr  5 02:06:22 2019 daemon.warn odhcpd[747]: DHCPV6 REQUEST IA_NA from 0001000123a30641d8cb8aebe685 on br-lan: ok fdcc:6bb4:eace::9e4/128 
Fri Apr  5 02:11:07 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: started, version 2.78 cachesize 150
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: DNS service limited to local subnets
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq-dhcp[1311]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: using local addresses only for domain lan
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: reading /tmp/resolv.conf.auto
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: using local addresses only for domain lan
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: using nameserver 194.204.152.34#53
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: using nameserver 194.204.159.1#53
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: read /etc/hosts - 4 addresses
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq[1311]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Fri Apr  5 02:11:07 2019 daemon.info dnsmasq-dhcp[1311]: read /etc/ethers - 0 addresses
Fri Apr  5 02:11:08 2019 daemon.info dnsmasq-dhcp[1311]: DHCPREQUEST(br-lan) 192.168.1.185 d8:cb:8a:eb:e6:85 
Fri Apr  5 02:11:08 2019 daemon.info dnsmasq-dhcp[1311]: DHCPACK(br-lan) 192.168.1.185 d8:cb:8a:eb:e6:85 MSI
Fri Apr  5 02:11:10 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Fri Apr  5 02:11:10 2019 daemon.err dnsmasq[1311]: failed to send packet: Operation not permitted
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1311]: exiting on receipt of SIGTERM
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: started, version 2.78 cachesize 150
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: DNS service limited to local subnets
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq-dhcp[1536]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: using local addresses only for domain lan
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: reading /tmp/resolv.conf.auto
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: using local addresses only for domain lan
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: using nameserver 194.204.152.34#53
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: using nameserver 194.204.159.1#53
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: read /etc/hosts - 4 addresses
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq-dhcp[1536]: read /etc/ethers - 0 addresses
Fri Apr  5 02:11:12 2019 daemon.info dnsmasq[1536]: exiting on receipt of SIGTERM
Fri Apr  5 02:11:13 2019 user.notice ddns-scripts[1549]: myddns_ipv4: PID '1549' started at 2019-04-05 00:11
Fri Apr  5 02:11:13 2019 user.warn ddns-scripts[1549]: myddns_ipv4: Service section disabled! - TERMINATE
Fri Apr  5 02:11:14 2019 user.warn ddns-scripts[1549]: myddns_ipv4: PID '1549' exit WITH ERROR '1' at 2019-04-05 00:11
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: started, version 2.78 cachesize 150
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: DNS service limited to local subnets
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq-dhcp[1698]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: using local addresses only for domain lan
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: reading /tmp/resolv.conf.auto
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: using local addresses only for domain lan
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: using nameserver 194.204.152.34#53
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: using nameserver 194.204.159.1#53
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: read /etc/hosts - 4 addresses
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq[1698]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Fri Apr  5 02:11:16 2019 daemon.info dnsmasq-dhcp[1698]: read /etc/ethers - 0 addresses
Fri Apr  5 02:11:16 2019 user.info adblock-[3.4.3]: adblock is currently disabled, please set adb_enabled to '1' to use this service
Fri Apr  5 02:11:18 2019 daemon.notice netifd: Interface 'VPN' is enabled
Fri Apr  5 02:11:18 2019 daemon.notice netifd: Network device 'tun0' link is up
Fri Apr  5 02:11:18 2019 daemon.notice netifd: Interface 'VPN' has link connectivity 
Fri Apr  5 02:11:18 2019 daemon.notice netifd: Interface 'VPN' is setting up now
Fri Apr  5 02:11:18 2019 daemon.notice netifd: Interface 'VPN' is now up
Fri Apr  5 02:11:18 2019 user.notice firewall: Reloading firewall due to ifup of VPN (tun0)
Fri Apr  5 02:11:19 2019 daemon.info odhcpd[747]: Using a RA lifetime of 0 seconds on br-lan
Fri Apr  5 02:12:22 2019 authpriv.info dropbear[2633]: Child connection from 192.168.1.185:58486
Fri Apr  5 02:13:02 2019 authpriv.warn dropbear[2633]: Bad password attempt for 'root' from 192.168.1.185:58486
Fri Apr  5 02:13:30 2019 authpriv.notice dropbear[2633]: Password auth succeeded for 'root' from 192.168.1.185:58486

ifconfig

br-lan    Link encap:Ethernet  HWaddr F8:1A:67:DF:EA:E1
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::fa1a:67ff:fedf:eae1/64 Scope:Link
          inet6 addr: fdcc:6bb4:eace::1/60 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5764 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:617614 (603.1 KiB)  TX bytes:1123249 (1.0 MiB)

eth0      Link encap:Ethernet  HWaddr F8:1A:67:DF:EA:E1
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5764 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:698310 (681.9 KiB)  TX bytes:1123249 (1.0 MiB)
          Interrupt:5

eth1      Link encap:Ethernet  HWaddr F8:1A:67:DF:EA:E3
          inet addr:192.168.1.19  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::fa1a:67ff:fedf:eae3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1045 errors:0 dropped:0 overruns:0 frame:0
          TX packets:655 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:380147 (371.2 KiB)  TX bytes:147673 (144.2 KiB)
          Interrupt:4

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1905 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1905 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:280421 (273.8 KiB)  TX bytes:280421 (273.8 KiB)

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:10.110.190.3  P-t-P:10.110.190.3  Mask:255.255.254.0
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2199 errors:0 dropped:1651 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:224521 (219.2 KiB)

route -n

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.110.190.1    128.0.0.0       UG    0      0        0 tun0
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth1
5.133.8.164     192.168.1.1     255.255.255.255 UGH   0      0        0 br-lan
10.110.190.0    0.0.0.0         255.255.254.0   U     0      0        0 tun0
128.0.0.0       10.110.190.1    128.0.0.0       UG    0      0        0 tun0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 br-lan
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
192.168.1.1     0.0.0.0         255.255.255.255 UH    0      0        0 eth1

config

config openvpn 'wind'
        option client '1'
        option nobind '1'
        option auth_user_pass '/etc/openvpn/userpass.txt'
        option auth 'SHA512'
        option comp_lzo 'yes'
        option remote_cert_tls 'server'
        option persist_key '1'
        option persist_tun '1'
        option ca '/etc/luci-uploads/cbid.openvpn.windscribe.ca'
        option mute_replay_warnings '1'
        option resolv_retry 'infinite'
        option log '/var/log/openvpn.log'
        option log_append '/var/log/openvpn.log'
        list remote 'pl.windscribe.com 443'
        option tls_auth '/etc/luci-uploads/cbid.openvpn.wind.key'
        option dev 'tun'
        option key_direction '1'
        option verb '2'
        option enabled '1'
        option reneg_sec '3600'
        option cipher 'AES-256-GCM'

pliki
/etc/luci-uploads/cbid.openvpn.wind.key
/etc/luci-uploads/cbid.openvpn.windscribe.ca
/etc/openvpn/userpass.txt
sprawdziłem i są okej

2019-04-04 18:16:04

root@LEDE:~# cat /etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd4f:d8d3:b6ba::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config interface 'wan'
        option ifname 'eth1'
        option proto 'dhcp'

config interface 'wan6'
        option ifname 'eth1'
        option proto 'dhcpv6'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '1 2 3 4 0'

config interface 'VPN'
        option proto 'none'
        option ifname 'tun0'
        option auto '1'
        option delegate '0'
        option type 'bridge'

root@LEDE:~# cat /etc/config/firewall

config defaults
        option syn_flood '1'
        option input 'ACCEPT'
        option output 'ACCEPT'
        option forward 'REJECT'

config zone
        option name 'lan'
        option input 'ACCEPT'
        option output 'ACCEPT'
        option forward 'ACCEPT'
        option network 'lan'

config zone
        option name 'wan'
        option input 'REJECT'
        option output 'ACCEPT'
        option forward 'REJECT'
        option masq '1'
        option mtu_fix '1'
        option network 'wan wan6'

config rule
        option name 'Allow-DHCP-Renew'
        option src 'wan'
        option proto 'udp'
        option dest_port '68'
        option target 'ACCEPT'
        option family 'ipv4'

config zone
        option name 'VPN_FW'
        option output 'ACCEPT'
        option masq '1'
        option mtu_fix '1'
        option network 'VPN'
        option input 'REJECT'
        option forward 'REJECT'

config rule
        option name 'Allow-Ping'
        option src 'wan'
        option proto 'icmp'
        option icmp_type 'echo-request'
        option family 'ipv4'
        option target 'ACCEPT'

config rule
        option name 'Allow-IGMP'
        option src 'wan'
        option proto 'igmp'
        option family 'ipv4'
        option target 'ACCEPT'

config rule
        option name 'Allow-DHCPv6'
        option src 'wan'
        option proto 'udp'
        option src_ip 'fc00::/6'
        option dest_ip 'fc00::/6'
        option dest_port '546'
        option family 'ipv6'
        option target 'ACCEPT'

config rule
        option name 'Allow-MLD'
        option src 'wan'
        option proto 'icmp'
        option src_ip 'fe80::/10'
        list icmp_type '130/0'
        list icmp_type '131/0'
        list icmp_type '132/0'
        list icmp_type '143/0'
        option family 'ipv6'
        option target 'ACCEPT'

config rule
        option name 'Allow-ICMPv6-Input'
        option src 'wan'
        option proto 'icmp'
        list icmp_type 'echo-request'
        list icmp_type 'echo-reply'
        list icmp_type 'destination-unreachable'
        list icmp_type 'packet-too-big'
        list icmp_type 'time-exceeded'
        list icmp_type 'bad-header'
        list icmp_type 'unknown-header-type'
        list icmp_type 'router-solicitation'
        list icmp_type 'neighbour-solicitation'
        list icmp_type 'router-advertisement'
        list icmp_type 'neighbour-advertisement'
        option limit '1000/sec'
        option family 'ipv6'
        option target 'ACCEPT'

config rule
        option name 'Allow-ICMPv6-Forward'
        option src 'wan'
        option dest '*'
        option proto 'icmp'
        list icmp_type 'echo-request'
        list icmp_type 'echo-reply'
        list icmp_type 'destination-unreachable'
        list icmp_type 'packet-too-big'
        list icmp_type 'time-exceeded'
        list icmp_type 'bad-header'
        list icmp_type 'unknown-header-type'
        option limit '1000/sec'
        option family 'ipv6'
        option target 'ACCEPT'

config rule
        option name 'Allow-IPSec-ESP'
        option src 'wan'
        option dest 'lan'
        option proto 'esp'
        option target 'ACCEPT'

config rule
        option name 'Allow-ISAKMP'
        option src 'wan'
        option dest 'lan'
        option dest_port '500'
        option proto 'udp'
        option target 'ACCEPT'

config include
        option path '/etc/firewall.user'

config forwarding
        option dest 'VPN_FW'
        option src 'lan'

config forwarding
        option dest 'wan'
        option src 'lan'

2019-04-04 17:38:53

głupi błąd zrobiłem, zamiast wybrać tls_auth do podlinkowania klucza używałem opcji key. Router połączył się z vpnem ale nie zmienia ip
var/log/openvpn.log

Thu Apr  4 18:28:08 2019 us=233464 OpenVPN 2.4.4 mips-openwrt-linux-gnu [SSL (mbed TLS)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD]
Thu Apr  4 18:28:08 2019 us=233859 library versions: mbed TLS 2.7.5, LZO 2.10
Thu Apr  4 18:28:08 2019 us=277405 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Thu Apr  4 18:28:08 2019 us=278132 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Thu Apr  4 18:28:08 2019 us=278696 LZO compression initializing
Thu Apr  4 18:28:08 2019 us=281363 Control Channel MTU parms [ L:1622 D:1140 EF:110 EB:0 ET:0 EL:3 ]
Thu Apr  4 18:28:08 2019 us=287824 Data Channel MTU parms [ L:1622 D:1450 EF:122 EB:406 ET:0 EL:3 ]
Thu Apr  4 18:28:08 2019 us=288588 Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1602,tun-mtu 1500,proto UDPv4,comp-lzo,ciphe
Thu Apr  4 18:28:08 2019 us=288975 Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1602,tun-mtu 1500,proto UDPv4,comp
Thu Apr  4 18:28:08 2019 us=289426 TCP/UDP: Preserving recently used remote address: [AF_INET]185.244.214.35:443
Thu Apr  4 18:28:08 2019 us=300012 Socket Buffers: R=[163840->163840] S=[163840->163840]
Thu Apr  4 18:28:08 2019 us=300483 UDP link local: (not bound)
Thu Apr  4 18:28:08 2019 us=300917 UDP link remote: [AF_INET]185.244.214.35:443

a to konfiguracja
https://drive.google.com/open?id=1ynKEf … 8K6gvBlzSK

2019-04-04 16:11:31

w teorii istnieje

root@LEDE:~# cat /etc/luci-uploads/cbid.openvpn.wind.key
-----BEGIN OpenVPN Static key V1-----
...
-----END OpenVPN Static key V1-----
root@LEDE:~#

zamiast kropek jest klucz

2019-04-04 15:33:09

Dobrze więc wrzuciłem nowszy system z tego linku wyżej. W logach zwracany jest błąd błąd
Options error: If you use one of --cert or --key, you must use them both
Use --help for more information.

ten rozwiązałem ale coś innego mu nie pasuje
Thu Apr 4 14:49:37 2019 us=9118 OpenVPN 2.4.4 mips-openwrt-linux-gnu [SSL (mbed TLS)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD]
Thu Apr 4 14:49:37 2019 us=9511 library versions: mbed TLS 2.7.5, LZO 2.10
Thu Apr 4 14:49:37 2019 us=12180 tls_ctx_load_priv_file:395: PK - Invalid key tag or value
Thu Apr 4 14:49:37 2019 us=12599 Cannot load private key file /etc/luci-uploads/cbid.openvpn.wind.key
Thu Apr 4 14:49:37 2019 us=13034 Error: private key password verification failed
Thu Apr 4 14:49:37 2019 us=13389 Exiting due to fatal error

2019-04-03 20:10:40

Cześć,
na routerze tp-link wr740n chciałem skonfigurować clienta openvpn. Wrzuciłem firmware OpenWrt Attitude Adjustment 12.09 / LuCI 0.11.1 Release (0.11.1) z pakietem openVPN 2.2.2-2. Robiłem wszystko
https://morfikov.github.io/post/jak-sko … UEQML8Xi8Q
ale nie dziala - nie chce się połączyć z serverem.
Pozdrawiam

2019-03-20 11:33:17

Programator przyszedł, przez putty nic nie zwraca. Wychodzi na to ze uart jest wyłączony

2019-03-15 21:22:13

taki ? https://allegro.pl/oferta/modul-konwert … 7382583187
mam jeszcze jedno pytanie, czy jest ktoś w polsce kto podjąłby się naprawy jeśli uwalony jest bootloader?

2019-03-15 21:13:27

Taki może być? https://allegro.pl/oferta/konwerter-usb … 7871457680

2019-03-15 20:17:07

Cześć
Dostałem od kolegi zbrickowany xiaomi router mi 3. Router odmówił współpracy przy wgrywaniu open-wrt. Próbowałem się z nim połączyć przy użyciu raspberry pi stosując pakiet minicom poprzez porty gpio ale po włączeniu routera nic się nie wyświetla. Próbowałem zrobić instalacje systemu przez usb ale również nie działa. Nie świeci się lampka na przodzie, tylko porty ethernet przy podłączeniu do zasilania na chwile się zapalają. Gdy jest podlaczony lanem do komputera swieci sie port lan a komputer widzi go jako urzadzenie niezidentyfikowane.
Jest jakaś opcja żeby go wskrzesić ?

edit
dowiedziałem się że pomylił wersje xiaomi przy wgrywaniu

2016-05-05 13:58:17

Dependency openvpn of package plugin-gargoyle-openvpn cannot be found, try updating your package lists (nawet na 1.8) mimo ,ze juz rozmiar paczek normalnie pokazuje

Czy można jakoś "Zamówić" obraz na powiększony flash ? chce postawić VPN do domu , jedyne co mi działa z pracy to 443...
Moge *dodatkowo* oddać sprzęt sieciowy jaki mam w domu (posprawdzam)

To moje ostatnie pytanie i temat można zamknąć

2016-05-05 13:23:12

świeżo wgrałem żeby zaprezentować screeny Gargoyle 1.9:

(poza tym przed update repozytoriów :

/plugin_root
Root Drive 29.867 MBytes Total, 29.766 MBytes Free

PO

/plugin_root
Root Drive 12.375 MBytes Total, 11.898 MBytes Free)

urzadzenie ma 16MB Flash / 64MB Ram

Nic nie zainstaluje - z tego tytułu pytanie o Gargoyle w wersji na sprzet taki jak mam,bo ta wersja "nie dziala"

2016-05-05 12:44:26

Próbowałem ,i

- większość paczek do pobrania "chce" z 10 /11 MB miejsca (?) i nie udaje się nic zainstalować (mimo ~ 12MB miejsca)

- repozytoria po pobraniu a potem kliknięciu na paczkę zainstaluj - nic się nie dzieje - od nowa jest pusta lista (trzeba "znów" zaktualizować)

coś jest uszkodzone

To tez mój wątek z pytaniem na forum czy przewidziany jest build do WR841n (mam v8) z wiekszym flashem

2016-05-05 12:31:03

Dzień dobry.

Czy będzie taka wersja ?

Mam WR841 V8 z powiększonym Flashem do 16mb , ale nie widzę dla swojego sprzętu- pliku bin .Chaos Calmer ma wiecej aplikacji do testow niz AA.

2015-08-30 21:37:32

Witam,
Zainstalowałem na ruterze TP Link WR1042ND Gargoyle 1.6.2.1 (r42171), by obsy
Podłączyłem modem E3131, używam obecnie jako dostęp do internetu(PLAY)

Czy jest możliwe aby do tego modemu wsadzić kartę micro sd i używać jej jako dysku sieciowego ?

Jeśli jest to możliwe czy mogę prosić o wskazówki jak to skonfigurować ?

Pozdrawiam wszystkich użytkowników forum i z góry dziękuję za wszelką pomoc.

2015-05-15 21:39:46

W takim razie niech opis będzie dla osób przeglądających a nie znających usługi:)

Co do drugie pytania, mógłbyś coś polecić? Pod opisem "lepszy" rozumiem nie zacinający się przy zmianie ustawień i z większą pamięcią flash.

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 1 z 3)

Znalezione posty: 1 do 25 z 63

1 Odpowiedź przez M8R-r5l59d 2023-06-29 14:57:15

Odp: ZTE MF289F - Porting OpenWRT (1,110 odpowiedzi, napisanych Sprzęt / Hardware)

2 Odpowiedź przez M8R-r5l59d 2023-06-28 17:25:22

Odp: ZTE MF289F - Porting OpenWRT (1,110 odpowiedzi, napisanych Sprzęt / Hardware)

3 Odpowiedź przez M8R-r5l59d 2023-06-28 16:03:41

Odp: ZTE MF289F - Porting OpenWRT (1,110 odpowiedzi, napisanych Sprzęt / Hardware)

4 Odpowiedź przez M8R-r5l59d 2023-06-28 10:42:11

Odp: Modem od routera MF286D (893 odpowiedzi, napisanych Sprzęt / Hardware)

5 Odpowiedź przez M8R-r5l59d 2020-12-15 10:45:44

Odp: UPC Wi-Free, Eduroam - wsparcie dla najpopularniejszych routerów (155 odpowiedzi, napisanych Oprogramowanie / Software)

6 Odpowiedź przez M8R-r5l59d 2019-04-08 16:38:23

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

7 Odpowiedź przez M8R-r5l59d 2019-04-08 13:42:12

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

8 Odpowiedź przez M8R-r5l59d 2019-04-05 08:15:54

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

9 Odpowiedź przez M8R-r5l59d 2019-04-05 02:00:07

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

10 Odpowiedź przez M8R-r5l59d 2019-04-04 23:30:00

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

11 Odpowiedź przez M8R-r5l59d 2019-04-04 18:16:04

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

12 Odpowiedź przez M8R-r5l59d 2019-04-04 17:38:53

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

13 Odpowiedź przez M8R-r5l59d 2019-04-04 16:11:31

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

14 Odpowiedź przez M8R-r5l59d 2019-04-04 15:33:09

Odp: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

15 Temat przez M8R-r5l59d 2019-04-03 20:10:40

Temat: OpenVPN na OpenWRT wr740n (19 odpowiedzi, napisanych Oprogramowanie / Software)

16 Odpowiedź przez M8R-r5l59d 2019-03-20 11:33:17

Odp: Xiaomi mi router 3 zbrickowany (6 odpowiedzi, napisanych Sprzęt / Hardware)

17 Odpowiedź przez M8R-r5l59d 2019-03-15 21:22:13

Odp: Xiaomi mi router 3 zbrickowany (6 odpowiedzi, napisanych Sprzęt / Hardware)

18 Odpowiedź przez M8R-r5l59d 2019-03-15 21:13:27

Odp: Xiaomi mi router 3 zbrickowany (6 odpowiedzi, napisanych Sprzęt / Hardware)

19 Temat przez M8R-r5l59d 2019-03-15 20:17:07

Temat: Xiaomi mi router 3 zbrickowany (6 odpowiedzi, napisanych Sprzęt / Hardware)

20 Odpowiedź przez M8R-r5l59d 2016-05-05 13:58:17

Odp: Gargoyle 1.9 0 obraz do WR841N z wiekszym flashem (7 odpowiedzi, napisanych Oprogramowanie / Software)

21 Odpowiedź przez M8R-r5l59d 2016-05-05 13:23:12

Odp: Gargoyle 1.9 0 obraz do WR841N z wiekszym flashem (7 odpowiedzi, napisanych Oprogramowanie / Software)

22 Odpowiedź przez M8R-r5l59d 2016-05-05 12:44:26

Odp: Gargoyle 1.9 0 obraz do WR841N z wiekszym flashem (7 odpowiedzi, napisanych Oprogramowanie / Software)

23 Temat przez M8R-r5l59d 2016-05-05 12:31:03

Temat: Gargoyle 1.9 0 obraz do WR841N z wiekszym flashem (7 odpowiedzi, napisanych Oprogramowanie / Software)

24 Temat przez M8R-r5l59d 2015-08-30 21:37:32

Temat: TL-WR1042ND + gargoyle + e3131 (1 odpowiedzi, napisanych Oprogramowanie / Software)

25 Odpowiedź przez M8R-r5l59d 2015-05-15 21:39:46

Odp: Google music na openwrt (5 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 1 do 25 z 63