Zanim będę miał możliwość wpięcia się na piny wpadło mi jeszcze jedno...
Czy są gdzieś do pobrania pierwsze wersje firmware w wersji 1.15.0.0 do RP-AC56?
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania
eko.one.pl → Posty przez ZylaPL
Znalezione posty: 10
1 2025-03-29 12:49:12
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
2 2025-03-28 21:29:07
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Niestety od ponad 5 minut miga pomarańczowa dioda i tyle... LAN się nie podnosi...
3 2025-03-28 21:20:41
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
root@(none):~# dmesg
[ 0.000000] Linux version 5.15.173 (cezary@eko.one.pl) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r0+24153-1292a493a6) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Jan 28 07:36:43 2025
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Asus RP-AC56
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2} total 2
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s17488 r8192 d23472 u49152
[ 0.000000] pcpu-alloc: s17488 r8192 d23472 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] Writing ErrCtl register=00020278
[ 0.000000] Readback ErrCtl register=00020278
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 55044K/65536K available (6818K kernel code, 597K rwdata, 856K rodata, 1252K init, 219K bss, 10492K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000003] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.016016] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.088288] pid_max: default: 32768 minimum: 301
[ 0.098040] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.112447] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.130681] rcu: Hierarchical SRCU implementation.
[ 0.140647] smp: Bringing up secondary CPUs ...
[ 0.150227] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.150251] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.150265] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.150313] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.210318] Synchronize counters for CPU 1: done.
[ 0.270001] smp: Brought up 1 node, 2 CPUs
[ 0.283179] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.302642] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.316222] pinctrl core: initialized pinctrl subsystem
[ 0.328232] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.340659] thermal_sys: Registered thermal governor 'step_wise'
[ 0.347654] FPU Affinity set after 11720 emulations
[ 0.371242] clocksource: Switched to clocksource GIC
[ 0.382512] NET: Registered PF_INET protocol family
[ 0.392292] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.407380] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.423897] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.439289] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.454474] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.468469] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.481255] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.494156] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.508276] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.519447] PCI: CLS 0 bytes, default 32
[ 0.529773] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.546550] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.558065] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.578432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.595543] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.607130] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.618597] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.630219] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[ 0.643542] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff]
[ 0.660977] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0060000000
[ 0.677197] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000
[ 1.051257] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[ 1.065042] mt7621-pci 1e140000.pcie: PCIE0 enabled
[ 1.074686] mt7621-pci 1e140000.pcie: PCIE1 enabled
[ 1.084384] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 1.098532] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[ 1.111089] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.121943] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 1.135587] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.147904] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 1.159794] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.172231] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[ 1.184742] pci 0000:00:00.0: supports D1
[ 1.192607] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.204863] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 1.216760] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.229171] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[ 1.241729] pci 0000:00:01.0: supports D1
[ 1.249559] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 1.263178] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.279044] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.295151] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[ 1.307034] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 1.319564] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.333199] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.343504] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 1.355577] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.369061] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 1.383409] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.396800] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[ 1.408685] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 1.422144] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 1.435523] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.449176] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[ 1.459488] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff]
[ 1.471554] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.485037] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 1.499377] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.512563] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 1.525642] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 1.539466] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 1.552595] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 1.566428] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 1.579908] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 1.594243] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 1.607727] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[ 1.622063] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[ 1.635559] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[ 1.649023] pci 0000:00:00.0: BAR 7: assigned [io 0x0000-0x0fff]
[ 1.661121] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.673218] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[ 1.686699] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.696546] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 1.708641] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 1.722112] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 1.736468] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[ 1.750983] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
[ 1.765322] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 1.775167] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 1.787259] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 1.800742] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
[ 1.817263] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.834015] printk: console [ttyS0] disabled
[ 1.842617] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 16, base_baud = 3125000) is a 16550A
[ 1.860591] printk: console [ttyS0] enabled
[ 1.877103] printk: bootconsole [early0] disabled
[ 1.902133] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[ 1.914984] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[ 1.925438] 5 fixed-partitions partitions found on MTD device spi0.0
[ 1.938167] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[ 1.952766] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[ 1.967842] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[ 1.982507] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[ 1.997527] Creating 5 MTD partitions on "spi0.0":
[ 2.007121] 0x000000000000-0x000000030000 : "u-boot"
[ 2.018025] 0x000000030000-0x000000040000 : "nvram"
[ 2.028742] 0x000000040000-0x000000050000 : "factory"
[ 2.040012] 0x000000050000-0x000000ff0000 : "firmware"
[ 2.052108] 2 uimage-fw partitions found on MTD device firmware
[ 2.064103] Creating 2 MTD partitions on "firmware":
[ 2.074007] 0x000000000000-0x000000288727 : "kernel"
[ 2.083902] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[ 2.102013] 0x000000288727-0x000000fa0000 : "rootfs"
[ 2.111950] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[ 2.131190] mtd: setting mtd5 (rootfs) as root device
[ 2.141480] 1 squashfs-split partitions found on MTD device rootfs
[ 2.153894] 0x000000730000-0x000000fa0000 : "rootfs_data"
[ 2.165722] 0x000000ff0000-0x000001000000 : "radio"
[ 2.314051] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.335960] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 18
[ 2.356106] i2c_dev: i2c /dev entries driver
[ 2.365770] i2c-mt7621 1e000900.i2c: clock 100 kHz
[ 2.378836] NET: Registered PF_INET6 protocol family
[ 2.392241] Segment Routing with IPv6
[ 2.399613] In-situ OAM (IOAM) with IPv6
[ 2.407576] NET: Registered PF_PACKET protocol family
[ 2.417788] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.444070] 8021q: 802.1Q VLAN Support v1.8
[ 2.458833] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.492848] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
[ 2.507413] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2.512077] mt7530-mdio mdio-bus:1f lan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=20)
[ 2.546228] DSA: tree 0 setup
[ 2.553678] clk: Disabling unused clocks
[ 2.568527] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 2.587080] Freeing unused kernel image (initmem) memory: 1252K
[ 2.598933] This architecture does not have kernel memory protection.
[ 2.611788] Run /sbin/init as init process
[ 2.619928] with arguments:
[ 2.619933] /sbin/init
[ 2.619939] with environment:
[ 2.619944] HOME=/
[ 2.619949] TERM=linux
[ 3.838187] init: Console is alive
[ 3.845638] init: - watchdog -
[ 5.621579] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.994423] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.012721] init: - preinit -
[ 6.292320] random: procd: uninitialized urandom read (4 bytes read)
[ 7.382128] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.801667] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.835603] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.270017] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[ 8.291474] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 8.291823] mt7530-mdio mdio-bus:1f lan: configuring for phy/gmii link mode
[ 8.322746] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.082952] mt7530-mdio mdio-bus:1f lan: Link is Up - 1Gbps/Full - flow control off
[ 11.082992] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 12.671261] random: crng init done
[ 12.678065] random: 6 urandom warning(s) missed due to ratelimiting
root@(none):~#4 2025-03-28 21:16:40
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Wyskakuje błąd
Failed to connect to ubus
5 2025-03-28 21:11:31
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Właczam router i cały czas miga na pomarańczowo dioda i router sie nei uruchamia normalnie.
W trybie failsafe wyświetla sie to:
6 2025-03-28 21:01:39
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Jest progres 
Po wgraniu Gargoyle co prawda router nie wstaje w normalnym trybie ale w trybie failsafe mogę się do niego dostać i wyskakuje ekran powitalny Gargoyla.
Czy mogę coś jeszcze zrobić aby router był w stanie uruchomić się normalnie?
7 2025-03-28 20:18:43
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Pomimo usunięcia większości niepotrzebnych rzeczy, to nie mogę przesłać pliku sysupgrade do \tmp aby spróbować wykonać upgrade.
Ale polecenie "free" pokazuje że jest 27 mb wolnego, a nie jestem w stanie zapisać pliku 7 mb...
8 2025-03-28 14:56:46
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Wgrałem TEN FIRMWARE
Efekty wydanych poleceń:
root@OpenWrt:~# ubus call system board
{
"kernel": "5.15.173",
"hostname": "OpenWrt",
"system": "MediaTek MT7621 ver:1 eco:3",
"model": "Asus RP-AC56",
"board_name": "asus,rp-ac56",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "23.05-SNAPSHOT",
"revision": "r24149-125a2e1311",
"target": "ramips/mt7621",
"description": "OpenWrt 23.05-SNAPSHOT r24149-125a2e1311"
}
}
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.8M 5.8M 0 100% /rom
tmpfs 27.2M 88.0K 27.1M 0% /tmp
tmpfs 27.2M 104.0K 27.1M 0% /tmp/root
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock6 7.2M 364.0K 6.8M 5% /overlay
overlayfs:/overlay 7.2M 364.0K 6.8M 5% /
root@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime,errors=continue)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
bpffs on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)
/dev/mtdblock6 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)Mam nadzieje, że to pomoże Dziękuje za zainteresowanie problemem.
9 2025-03-28 14:12:00
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Ok, spróbuje zwolnić miejsce i wgrać obraz do /tmp,ale dziwne jest to, że metodą tftp (Asus Firmware Restoration) nie wgrywa prawidłowo.
10 2025-03-28 13:47:39
Odp: Gargoyle 1.15.x (132 odpowiedzi, napisanych Oprogramowanie / Software)
Witam, mam problem z obrazami do Asus RP-AC56.
Nie da się wgrać w żaden sposób udostępnionego obrazu (próbowałem przez sysupgrade z openwrt bez luci, przez mtd i przez Asus Firmware Restoration).
W przypadku Asus Firmware Restoration nie wstaje po restarcie i cały czas miga pomarańczowa dioda, w przypadku pozostałych metod nie da sie zapakować pliku do katalogu /tmp ponieważ w połowie przesyłania/pobierania wywala błąd i proces się killuje.
W przypadku obrazów OpenWRT niema problemu z wgraniem.
Dodam, iż posiadam jeszcze Asus RP-AC87 i na nim wgrywanie za pomocą Asus Firmware Restoration idzie bez najmniejszych problemów i Gargoyle wstaje bez problemu.
Czy mogę prosić autora o weryfikacje obrazów do Asus RP-AC56 ?
Znalezione posty: 10
Strony 1
eko.one.pl → Posty przez ZylaPL
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc