Używam e3272 (HiLink) wpiętego bezpośrednio do portu USB TL-MR3420 v2.
Nie doświadczam żadnych problemów z zawieszaniem modemu.
Niestety, nie wiem czy i ewentualnie jak wykonać extroot'a w przypadku tego modemu.
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania
eko.one.pl → Posty przez dundee
Znalezione posty: 25
1 2014-07-07 06:58:31
Odp: TP link mr3420 v2 + Huawei e3276/e3272 - parę pytań (14 odpowiedzi, napisanych Oprogramowanie / Software)
2 2013-08-01 15:39:56
Odp: Nietypowa konfiguracja - możliwe? (8 odpowiedzi, napisanych Oprogramowanie / Software)
Ok, rozumiem. Dziękuję za pomoc.
3 2013-08-01 15:31:18
Odp: Nietypowa konfiguracja - możliwe? (8 odpowiedzi, napisanych Oprogramowanie / Software)
Gdzie znaleźć przykład konfiguracji dla tego pakietu?
4 2013-08-01 15:05:47
Odp: Nietypowa konfiguracja - możliwe? (8 odpowiedzi, napisanych Oprogramowanie / Software)
Jest prawie dobrze.
Prawie polega na tym, że łącząc się za pomocą WiFi na Gargoyle nie otrzymuję adresu IP z DHCP działającego na firewall-u.
Jeżeli ustawię adres ręcznie wszystko hula, aż miło.
5 2013-08-01 14:44:32
Odp: Nietypowa konfiguracja - możliwe? (8 odpowiedzi, napisanych Oprogramowanie / Software)
DHCP na Gargoyle jest wyłączone.
Chodzi mi o to, żeby interface sieci bezprzewodowej miał inny adres niż sieci lan.
6 2013-08-01 14:32:01
Temat: Nietypowa konfiguracja - możliwe? (8 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
mam nietypowy problem.
Otóż, konfiguracja sieci wygląda następująco:
1. 192.168.1.1, maska 255.255.255.252 - TL-WR1043ND z zainstalowanym Gargoyle i działającym DualWAN-em,
2. 192.168.1.2 maska 255.255.255.252; 192.168.0.1, maska 255.255.255.0 (dwie karty sieciowe) - firewall, dhcp, dns itd.
Tutaj pojawia się problem/pytanie: czy da się skonfigurować interface WLAN w Gargoyle tak, aby miał przypisany statycznie adres 192.168.0.249, umożliwiał maszynom podłączonym przez WiFi pobieranie adresu IP z puli obsługiwanej przez DHCP na firewall-u? Jeżeli tak, to jak to zrobić?
Z góry dziękuję za pomoc.
7 2011-10-17 10:31:20
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Więc przyczyna była w innym miejscu, nie routerze ...
Dziwi mnie tylko fakt, że podobny efekt nie występuje podczas pracy z oryginalnym firmwarem producenta routera.
8 2011-10-17 06:47:49
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
dundee napisał/a:
Cezary napisał/a:Możesz spróbować. Co jak co ale router musi się dać pingnąć, jeżeli masz z nim połączenie.
Dobra, spróbuje i dam znać jak poszło.
Chyba znalazłem przyczynę problemów, zupełnie przypadkiem.
Prawdopodobnie wcale nie chodziło o adresację, czy nawet kanał, na którym operował router.
Po ostatnich zmaganiach ku mojemu wielkiemu zdziwieniu sieć działała bez większego problemu przez kilkanaście godzin. Nagle przestała działać. Szybko przeanalizowałem co się mogło zmienić. Otóż nic, poza odłączeniem netbooka od ładowarki. Zatem szybciutko podłączyłem go ponownie. Sieć działa. Odłączam ponownie - sieć nie działa. Co ciekawe nie tylko na moim komputerze.
Wydaję zatem polecenie:
sudo iwconfig eth1 power offi sieć ponownie działa.
Jeżeli taki stan rzeczy będzie się nadal utrzymywał to myślę, że to problem ze sterownikiem karty sieciowej. Posiadam kartę Broadcom na chipsecie BCM4313. Sterownik w użyciu broadcom-wl.
9 2011-10-15 22:38:27
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Możesz spróbować. Co jak co ale router musi się dać pingnąć, jeżeli masz z nim połączenie.
Dobra, spróbuje i dam znać jak poszło.
10 2011-10-15 22:24:58
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
No to masz konfigurację klienta zrąbaną. Co jak co ale router musi się pingować. Nie masz na komputerze drugiej sieci o takiej samej adresacji?
Na komputerze mam ustawione pobieranie adresu z DHCP.
Nie mam innej sieci.
Może zmienić adresację na routerze i spróbować jak będzie?
11 2011-10-15 22:05:09
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Bo adres ip masz dziwny, nie z dhcp. To znaczy że bramy i dnsów nie ustawiłeś?
W jakim sensie dziwny?
Ograniczyłem zakres DHCP od 2 do 16.
Jedyne czego nie zrobiłem, to nie ustawiłem opcji "Wymuszaj używanie przez klientów serwerów DNS routera".
12 2011-10-15 21:54:35
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Moment. Co właściwie pokazałeś? To jest ssid z gargoyle?
Tak, taki sobie ustawiłem.
Coś z nim nie tak?
13 2011-10-15 21:45:47
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
łączy się do routera? ping do routera jest? ping do 8.8.8.8 jest? ping do eko.one.pl jest?
IP mam przyznane.
ifconfig:
eth1 Link encap:Ethernet HWaddr 00:0B:6B:7C:69:03
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20b:6bff:fe7c:6903/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:281306 errors:0 dropped:51 overruns:0 frame:66225
TX packets:234283 errors:113 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:243659519 (232.3 Mb) TX bytes:32720417 (31.2 Mb)
Interrupt:16
iwconfig:
eth1 IEEE 802.11 ESSID:"TP-LINK_9864C0" Nickname:""
Mode:Managed Frequency:2.442 GHz Access Point: 54:E6:FC:98:64:C0
Bit Rate=65 Mb/s Tx-Power:24 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=-28 dBm Noise level=-94 dBm
Rx invalid nwid:0 Rx invalid crypt:4 Rx invalid frag:0
Tx excessive retries:171 Invalid misc:0 Missed beacon:0
Próba pingowania routera, 8.8.8.8 czy każdego innego adresu kończy się komunikatem:
Destination Host Unreachable
14 2011-10-15 21:31:58
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Zamontowało? Pokażesz chociaż logi czy coś? Czy mamy zgadywać?
W międzyczasie zrobiłem firstboot.
Teraz USB montuje się automatycznie.
Mam nadal problem z WiFi.
Po kablu wszystko śmiga, po WiFi nie mam dostępu do sieci.
logread:
Jan 1 01:01:02 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan 1 01:01:03 Gargoyle daemon.info dnsmasq-dhcp[1245]: DHCPREQUEST(br-lan) 192.168.1.7 00:24:54:a4:82:da
Jan 1 01:01:03 Gargoyle daemon.info dnsmasq-dhcp[1245]: DHCPNAK(br-lan) 192.168.1.7 00:24:54:a4:82:da address not available
Jan 1 01:01:03 Gargoyle user.warn kernel: jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Jan 1 01:01:03 Gargoyle user.warn kernel: jffs2_build_filesystem(): unlocking the mtd device... done.
Jan 1 01:01:05 Gargoyle cron.err crond[2221]: crond (busybox 1.15.3) started, log level 5
Jan 1 01:01:07 Gargoyle daemon.info dnsmasq-dhcp[1245]: DHCPDISCOVER(br-lan) 00:24:54:a4:82:da
Jan 1 01:01:07 Gargoyle daemon.info dnsmasq-dhcp[1245]: DHCPOFFER(br-lan) 192.168.1.168 00:24:54:a4:82:da
Jan 1 01:01:07 Gargoyle daemon.info dnsmasq-dhcp[1245]: DHCPREQUEST(br-lan) 192.168.1.168 00:24:54:a4:82:da
Jan 1 01:01:07 Gargoyle daemon.info dnsmasq-dhcp[1245]: DHCPACK(br-lan) 192.168.1.168 00:24:54:a4:82:da daniel-netbook
Jan 1 01:01:08 Gargoyle user.warn kernel: jffs2_build_filesystem(): erasing all blocks after the end marker... ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Jan 1 01:01:08 Gargoyle user.warn kernel: old minutes west=0, new minutes west=-60
Jan 1 01:01:11 Gargoyle cron.err crond[2563]: crond (busybox 1.15.3) started, log level 5
Jan 1 01:01:20 Gargoyle user.warn kernel: done.
Jan 1 01:01:20 Gargoyle user.info sysinit: copying files ... done
Jan 1 01:01:20 Gargoyle user.info kernel: mini_fo: using base directory: /
Jan 1 01:01:20 Gargoyle user.info kernel: mini_fo: using storage directory: /overlay
Jan 1 01:01:21 Gargoyle authpriv.info dropbear[2635]: Running in background
Jan 1 01:01:24 Gargoyle user.info sysinit: setting up led WLAN
Jan 1 01:01:24 Gargoyle user.info sysinit: setting up led USB
Jan 1 01:01:24 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Jan 1 01:01:30 Gargoyle user.info firewall: removing wan (eth0.2) from zone wan
Jan 1 01:01:32 Gargoyle user.notice ifup: Allowing Router Advertisements on wan (eth0.2)
Jan 1 01:01:32 Gargoyle user.info firewall: adding wan (eth0.2) to zone wan
Jan 1 01:01:34 Gargoyle daemon.info dnsmasq[1245]: reading /tmp/resolv.conf.auto
Jan 1 01:01:34 Gargoyle daemon.info dnsmasq[1245]: using nameserver 62.179.1.62#53
Jan 1 01:01:34 Gargoyle daemon.info dnsmasq[1245]: using nameserver 62.179.1.63#53
Jan 1 01:01:34 Gargoyle daemon.info dnsmasq[1245]: using local addresses only for domain lan
Jan 1 01:01:34 Gargoyle cron.err crond[3133]: crond (busybox 1.15.3) started, log level 5
Jan 1 01:01:40 Gargoyle auth.info passwd: Password for root changed by root
Jan 1 01:01:40 Gargoyle authpriv.info dropbear[3487]: Running in background
Jan 1 01:01:40 Gargoyle user.notice root: starting ntpclient
Oct 15 22:16:59 Gargoyle cron.err crond[3133]: time disparity of 21978495 minutes detected
Oct 15 22:18:01 Gargoyle cron.err crond[3133]: USER root pid 3660 cmd /bin/3gtester
Oct 15 22:19:32 Gargoyle cron.err crond[3864]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:19:32 Gargoyle user.warn kernel: ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Oct 15 22:19:32 Gargoyle user.warn kernel: old minutes west=-60, new minutes west=-120
Oct 15 22:19:33 Gargoyle cron.err crond[3915]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:19:34 Gargoyle daemon.info dnsmasq[1245]: exiting on receipt of SIGTERM
Oct 15 22:19:34 Gargoyle user.notice root: stopping ntpclient
Oct 15 22:19:35 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering disabled state
Oct 15 22:19:35 Gargoyle user.info kernel: device eth0 left promiscuous mode
Oct 15 22:19:35 Gargoyle user.info kernel: device eth0.1 left promiscuous mode
Oct 15 22:19:35 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering disabled state
Oct 15 22:19:39 Gargoyle user.notice ifup: Enabling Router Solicitations on loopback (lo)
Oct 15 22:19:40 Gargoyle user.info kernel: device eth0.1 entered promiscuous mode
Oct 15 22:19:40 Gargoyle user.info kernel: device eth0 entered promiscuous mode
Oct 15 22:19:40 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering forwarding state
Oct 15 22:19:42 Gargoyle user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: Calling CRDA for country: PL
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: Regulatory domain changed to country: PL
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Oct 15 22:19:43 Gargoyle user.info kernel: cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Oct 15 22:19:45 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Oct 15 22:19:45 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Oct 15 22:19:46 Gargoyle user.notice ifup: Allowing Router Advertisements on wan (eth0.2)
Oct 15 22:19:47 Gargoyle user.notice root: starting ntpclient
Oct 15 22:19:48 Gargoyle daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: authenticated
Oct 15 22:19:48 Gargoyle daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: associated (aid 1)
Oct 15 22:19:48 Gargoyle daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: deauthenticated due to local deauth request
Oct 15 22:19:48 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:19:48 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Oct 15 22:19:48 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering disabled state
Oct 15 22:19:48 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Oct 15 22:19:48 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Oct 15 22:19:49 Gargoyle daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: authenticated
Oct 15 22:19:49 Gargoyle daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: associated (aid 1)
Oct 15 22:19:49 Gargoyle daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e WPA: pairwise key handshake completed (RSN)
Oct 15 22:19:51 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Oct 15 22:19:52 Gargoyle user.info firewall: adding wan (eth0.2) to zone wan
Oct 15 22:19:52 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Oct 15 22:19:52 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Oct 15 22:19:54 Gargoyle cron.err crond[5702]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:19:55 Gargoyle cron.err crond[6030]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: started, version 2.55 cachesize 150
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: using local addresses only for domain lan
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: reading /tmp/resolv.conf.auto
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: using nameserver 62.179.1.62#53
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: using nameserver 62.179.1.63#53
Oct 15 22:19:56 Gargoyle daemon.warn dnsmasq[6050]: ignoring nameserver 192.168.1.1 - local interface
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: using local addresses only for domain lan
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq[6050]: read /etc/hosts - 2 addresses
Oct 15 22:19:56 Gargoyle daemon.info dnsmasq-dhcp[6050]: read /etc/ethers - 0 addresses
Oct 15 22:19:58 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:20:02 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPREQUEST(br-lan) 192.168.1.5 00:23:7d:ad:88:1e
Oct 15 22:20:02 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPNAK(br-lan) 192.168.1.5 00:23:7d:ad:88:1e address not available
Oct 15 22:20:05 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPDISCOVER(br-lan) 00:23:7d:ad:88:1e
Oct 15 22:20:05 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPOFFER(br-lan) 192.168.1.216 00:23:7d:ad:88:1e
Oct 15 22:20:05 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPDISCOVER(br-lan) 00:23:7d:ad:88:1e
Oct 15 22:20:05 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPOFFER(br-lan) 192.168.1.216 00:23:7d:ad:88:1e
Oct 15 22:20:05 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPREQUEST(br-lan) 192.168.1.216 00:23:7d:ad:88:1e
Oct 15 22:20:05 Gargoyle daemon.info dnsmasq-dhcp[6050]: DHCPACK(br-lan) 192.168.1.216 00:23:7d:ad:88:1e UDW-C4580
Oct 15 22:20:08 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:20:11 Gargoyle daemon.info dnsmasq[6050]: exiting on receipt of SIGTERM
Oct 15 22:20:11 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Oct 15 22:20:11 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: started, version 2.55 cachesize 150
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCP, IP range 192.168.1.2 -- 192.168.1.16, lease time 12h
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: using local addresses only for domain lan
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: reading /tmp/resolv.conf.auto
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: using nameserver 62.179.1.62#53
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: using nameserver 62.179.1.63#53
Oct 15 22:20:14 Gargoyle daemon.warn dnsmasq[6181]: ignoring nameserver 192.168.1.1 - local interface
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: using local addresses only for domain lan
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq[6181]: read /etc/hosts - 2 addresses
Oct 15 22:20:14 Gargoyle daemon.info dnsmasq-dhcp[6181]: read /etc/ethers - 0 addresses
Oct 15 22:20:15 Gargoyle cron.err crond[6209]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:20:15 Gargoyle cron.err crond[6260]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:20:18 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:20:19 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Oct 15 22:20:20 Gargoyle user.info firewall: adding wan (eth0.2) to zone wan
Oct 15 22:20:21 Gargoyle cron.err crond[6711]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:20:23 Gargoyle cron.err crond[7039]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:20:28 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:20:38 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:20:48 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:20:58 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:21:01 Gargoyle cron.err crond[7039]: USER root pid 7211 cmd /bin/3gtester
Oct 15 22:21:01 Gargoyle cron.err crond[7039]: USER root pid 7212 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Oct 15 22:21:08 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:21:13 Gargoyle cron.err crond[7335]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:21:15 Gargoyle cron.err crond[7658]: crond (busybox 1.15.3) started, log level 5
Oct 15 22:21:18 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:21:28 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:21:38 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:21:48 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:21:58 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:22:08 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:22:18 Gargoyle authpriv.info dropbear[7690]: Child connection from 192.168.1.168:39436
Oct 15 22:22:18 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:22:26 Gargoyle authpriv.notice dropbear[7690]: Password auth succeeded for 'root' from 192.168.1.168:39436
Oct 15 22:22:28 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:22:38 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:22:48 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:22:59 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:09 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:16 Gargoyle daemon.warn exportfs[7782]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Oct 15 22:23:16 Gargoyle daemon.err exportfs[7782]: can't lock /var/lib/nfs/etab for writing
Oct 15 22:23:16 Gargoyle daemon.warn exportfs[7782]: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Oct 15 22:23:16 Gargoyle daemon.err exportfs[7782]: can't lock /var/lib/nfs/xtab for writing
Oct 15 22:23:17 Gargoyle daemon.notice rpc.statd[7816]: Version 1.1.6 Starting
Oct 15 22:23:17 Gargoyle daemon.warn sm-notify[7817]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Oct 15 22:23:17 Gargoyle daemon.notice rpc.statd[7816]: statd running as root. chown /var/lib/nfs/sm to choose different user
Oct 15 22:23:19 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:29 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:39 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:49 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:58 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 15 22:23:58 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: associated (aid 2)
Oct 15 22:23:58 Gargoyle daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 WPA: pairwise key handshake completed (RSN)
Oct 15 22:23:58 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPREQUEST(br-lan) 192.168.1.2 00:0b:6b:7c:69:03
Oct 15 22:23:58 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPACK(br-lan) 192.168.1.2 00:0b:6b:7c:69:03 daniel-netbook
Oct 15 22:24:01 Gargoyle cron.err crond[7658]: USER root pid 7879 cmd /bin/3gtester
Oct 15 22:24:42 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPREQUEST(br-lan) 192.168.1.168 00:24:54:a4:82:da
Oct 15 22:24:42 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPNAK(br-lan) 192.168.1.168 00:24:54:a4:82:da address not available
Oct 15 22:24:46 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPDISCOVER(br-lan) 00:24:54:a4:82:da
Oct 15 22:24:46 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPOFFER(br-lan) 192.168.1.14 00:24:54:a4:82:da
Oct 15 22:24:46 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPREQUEST(br-lan) 192.168.1.14 00:24:54:a4:82:da
Oct 15 22:24:46 Gargoyle daemon.info dnsmasq-dhcp[6181]: DHCPACK(br-lan) 192.168.1.14 00:24:54:a4:82:da daniel-netbook
Oct 15 22:25:35 Gargoyle authpriv.info dropbear[7886]: Child connection from 192.168.1.14:35296
Oct 15 22:25:47 Gargoyle authpriv.notice dropbear[7886]: Password auth succeeded for 'root' from 192.168.1.14:35296
dmesg:
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #17 Thu Oct 13 17:07:12 CEST 2011
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=a22aaaa3, boardp=aaa2aaa2, parts=22aaa2aa
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802e90b0, node_mem_map 81000000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29228k/32768k available (2175k kernel code, 3540k reserved, 423k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
yaffs Sep 16 2011 21:41:19 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=560000, len=290000
0x000000560000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.4
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-08-25
Backport based on wireless-testing.git master-2011-09-14
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (459 buckets, 1836 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
xt_time: kernel timezone is -0000
Hooked IMQ after mangle on PREROUTING
Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
Ebtables v2.0 registered
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 0:0:0:0: [sda] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
old minutes west=0, new minutes west=-60
done.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
ar71xx-wdt: enabling watchdog timer
ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
old minutes west=-60, new minutes west=-120
br-lan: port 1(eth0.1) entering disabled state
device eth0 left promiscuous mode
device eth0.1 left promiscuous mode
br-lan: port 1(eth0.1) entering disabled state
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
15 2011-10-15 20:35:55
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Gargoyle najpierw próbuje zamontować to jak mu się uda to to wyświetla. Jak nie to nie. Więc zobacz czy da się zamontować z palca po prostu.
Spróbowałem i nic niestety.
Niby w konsoli jest, że zamontowano, w przeglądarce ciągle nic.
Żeby tego było mało to dzisiaj rano zdechło WiFi. Niby dostałem adres, ale pingi nie idą, strony się nie otwierają. W logach nic nowego, po prostu nic.
Ehh, coś chyba nie mam szczęścia do tego Gargoyle, a kupiłem ten router tylko ze względu na możliwość jego zainstalowania.
Pomóżcie proszę.
16 2011-10-14 21:59:07
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Pojawił się inny problem. Po podłączeniu pendrive'a w Gargoyle widzę tylko
Nie wykryto żadnego nośnika USB.
W konsoli (dmesg) mam natomiast następujący komunikat:
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 1:0:0:0: [sda] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
Świeci się również kontrolka na routerze.
Co może być nie tak? Jak sobie z tym poradzić?
17 2011-10-14 21:39:55
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
Tak/nie. Nie bo nigdy mac80211 tego nie wspierał, tak bo w ostatnich poprawkach dodali opcję auto, ale ona po prostu wybiera pierwszy możliwy kanał. Czyli tak jak być ustawił z palca.
Ustawiłem kanał z palca, zgodnie z resztą z sugestią @batu tak, aby się nie pokrywał z innym i póki co router śmiga. Jak długo tak będzie? Tego nie wiem.
Na wszelki wypadek wrzucam to co jest w logach po restarcie routerka, to może powiecie mi czy coś jest nie tak.
Z góry dzięki za pomoc.
dmesg:
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #17 Thu Oct 13 17:07:12 CEST 2011
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=a22aaaa3, boardp=aaa2aaa2, parts=22aaa2aa
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802e90b0, node_mem_map 81000000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29228k/32768k available (2175k kernel code, 3540k reserved, 423k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
yaffs Sep 16 2011 21:41:19 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=560000, len=290000
0x000000560000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.4
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-08-25
Backport based on wireless-testing.git master-2011-09-14
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (459 buckets, 1836 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
xt_time: kernel timezone is -0000
Hooked IMQ after mangle on PREROUTING
Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
Ebtables v2.0 registered
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 0:0:0:0: [sda] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
old minutes west=0, new minutes west=-120
ar71xx-wdt: enabling watchdog timer
logread:
Jan 1 01:00:17 TP-LINK_9864C0 user.debug kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 01:00:17 TP-LINK_9864C0 user.info kernel: ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan 1 01:00:17 TP-LINK_9864C0 user.info kernel: cfg80211: Calling CRDA for country: US
Jan 1 01:00:19 TP-LINK_9864C0 user.info kernel: RPC: Registered udp transport module.
Jan 1 01:00:19 TP-LINK_9864C0 user.info kernel: RPC: Registered tcp transport module.
Jan 1 01:00:19 TP-LINK_9864C0 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:19 TP-LINK_9864C0 user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:19 TP-LINK_9864C0 user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:00:19 TP-LINK_9864C0 user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: Regulatory domain changed to country: US
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:20 TP-LINK_9864C0 user.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 1 01:00:21 TP-LINK_9864C0 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 01:00:21 TP-LINK_9864C0 user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:21 TP-LINK_9864C0 user.info kernel: NET: Registered protocol family 24
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 01:00:22 TP-LINK_9864C0 user.warn kernel: nf_conntrack version 0.5.0 (459 buckets, 1836 max)
Jan 1 01:00:22 TP-LINK_9864C0 user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jan 1 01:00:22 TP-LINK_9864C0 user.warn kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jan 1 01:00:22 TP-LINK_9864C0 user.warn kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 2
Jan 1 01:00:22 TP-LINK_9864C0 user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:22 TP-LINK_9864C0 user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_2.6.32.27_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71xx-ehci
Jan 1 01:00:23 TP-LINK_9864C0 user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Kingston Product=DataTraveler_2.0 Serial=20080825000000000000011E
Jan 1 01:00:23 TP-LINK_9864C0 user.info kernel: xt_time: kernel timezone is -0000
Jan 1 01:00:24 TP-LINK_9864C0 user.info kernel: Hooked IMQ after mangle on PREROUTING
Jan 1 01:00:24 TP-LINK_9864C0 user.info kernel: Hooked IMQ after nat on POSTROUTING
Jan 1 01:00:24 TP-LINK_9864C0 user.info kernel: IMQ driver loaded successfully.
Jan 1 01:00:24 TP-LINK_9864C0 user.info kernel: Ebtables v2.0 registered
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver cdc_acm
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: USB Serial support registered for generic
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbserial: USB Serial Driver core
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:25 TP-LINK_9864C0 user.debug kernel: usb-storage: device found at 2
Jan 1 01:00:25 TP-LINK_9864C0 user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-alauda
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-cypress
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-datafab
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-freecom
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-isd200
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-jumpshot
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-karma
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-sddr09
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-sddr55
Jan 1 01:00:25 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver ums-usbat
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: USB Serial support registered for GSM modem (1-port)
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver option
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: option: v0.7.2:USB Driver for GSM modems
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: USB Serial support registered for Sierra USB modem
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: usbcore: registered new interface driver sierra
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
Jan 1 01:00:26 TP-LINK_9864C0 user.info kernel: fuse init (API version 7.13)
Jan 1 01:00:26 TP-LINK_9864C0 user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_2.6.32.27_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71xx-ehci
Jan 1 01:00:26 TP-LINK_9864C0 user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Kingston Product=DataTraveler_2.0 Serial=20080825000000000000011E
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: Calling CRDA for country: PL
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: Regulatory domain changed to country: PL
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:28 TP-LINK_9864C0 user.info kernel: cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 1 01:00:30 TP-LINK_9864C0 user.notice kernel: scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
Jan 1 01:00:30 TP-LINK_9864C0 user.debug kernel: usb-storage: device scan complete
Jan 1 01:00:30 TP-LINK_9864C0 user.notice kernel: sd 0:0:0:0: [sda] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
Jan 1 01:00:30 TP-LINK_9864C0 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:30 TP-LINK_9864C0 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan 1 01:00:30 TP-LINK_9864C0 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:30 TP-LINK_9864C0 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:30 TP-LINK_9864C0 user.info kernel: sda: sda1
Jan 1 01:00:30 TP-LINK_9864C0 user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:30 TP-LINK_9864C0 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:00:30 TP-LINK_9864C0 user.info kernel: device wlan0 entered promiscuous mode
Jan 1 01:00:30 TP-LINK_9864C0 user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 1 01:00:31 TP-LINK_9864C0 user.notice ifup: Allowing Router Advertisements on wan (eth0.2)
Jan 1 01:00:31 TP-LINK_9864C0 user.notice root: starting ntpclient
Oct 14 22:24:27 TP-LINK_9864C0 user.info kernel: device wlan0 left promiscuous mode
Oct 14 22:24:27 TP-LINK_9864C0 user.info kernel: br-lan: port 2(wlan0) entering disabled state
Oct 14 22:24:27 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: authenticated
Oct 14 22:24:27 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e IEEE 802.11: associated (aid 1)
Oct 14 22:24:28 TP-LINK_9864C0 user.info kernel: device wlan0 entered promiscuous mode
Oct 14 22:24:28 TP-LINK_9864C0 user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Oct 14 22:24:28 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:23:7d:ad:88:1e WPA: pairwise key handshake completed (RSN)
Oct 14 22:23:42 TP-LINK_9864C0 user.notice root: starting ntpclient
Oct 14 22:24:29 TP-LINK_9864C0 user.info sysinit: Loading defaults
Oct 14 22:24:29 TP-LINK_9864C0 user.info sysinit: Loading synflood protection
Oct 14 22:24:29 TP-LINK_9864C0 user.info sysinit: Adding custom chains
Oct 14 22:24:29 TP-LINK_9864C0 user.info sysinit: Loading zones
Oct 14 22:24:30 TP-LINK_9864C0 user.info sysinit: Loading forwardings
Oct 14 22:24:30 TP-LINK_9864C0 user.info sysinit: Loading redirects
Oct 14 22:24:30 TP-LINK_9864C0 user.info sysinit: Loading rules
Oct 14 22:24:31 TP-LINK_9864C0 user.info sysinit: Loading includes
Oct 14 22:24:31 TP-LINK_9864C0 user.info sysinit: Optimizing conntrack
Oct 14 22:24:31 TP-LINK_9864C0 user.info sysinit: Loading interfaces
Oct 14 22:24:31 TP-LINK_9864C0 user.info firewall: adding lan (br-lan) to zone lan
Oct 14 22:24:32 TP-LINK_9864C0 user.info firewall: adding wan (eth0.2) to zone wan
Oct 14 22:24:33 TP-LINK_9864C0 cron.err crond[1859]: crond (busybox 1.15.3) started, log level 5
Oct 14 22:24:33 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 14 22:24:33 TP-LINK_9864C0 authpriv.info dropbear[1893]: Running in background
Oct 14 22:24:34 TP-LINK_9864C0 daemon.crit httpd_gargoyle[1948]: socket :: - Address family not supported by protocol
Oct 14 22:24:34 TP-LINK_9864C0 daemon.err httpd_gargoyle[1948]: unknown sockaddr family on listen socket - 0
Oct 14 22:24:34 TP-LINK_9864C0 daemon.warn httpd_gargoyle[1971]: started as root without requesting chroot(), warning only
Oct 14 22:24:34 TP-LINK_9864C0 daemon.notice httpd_gargoyle[1971]: httpd_gargoyle/1.0 14mar2008 starting on TP-LINK_9864C0, port 80
Oct 14 22:24:35 TP-LINK_9864C0 cron.err crond[1982]: crond (busybox 1.15.3) started, log level 5
Oct 14 22:24:35 TP-LINK_9864C0 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Oct 14 22:24:35 TP-LINK_9864C0 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Oct 14 22:24:36 TP-LINK_9864C0 user.warn kernel: ipt_bandwidth: timezone shift of 120 minutes detected, adjusting
Oct 14 22:24:36 TP-LINK_9864C0 user.warn kernel: old minutes west=0, new minutes west=-120
Oct 14 22:24:37 TP-LINK_9864C0 cron.err crond[2314]: crond (busybox 1.15.3) started, log level 5
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: started, version 2.55 cachesize 150
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: using local addresses only for domain lan
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: reading /tmp/resolv.conf.auto
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: using nameserver 62.179.1.62#53
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: using nameserver 62.179.1.63#53
Oct 14 22:24:39 TP-LINK_9864C0 daemon.warn dnsmasq[2334]: ignoring nameserver 192.168.1.1 - local interface
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: using local addresses only for domain lan
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq[2334]: read /etc/hosts - 3 addresses
Oct 14 22:24:39 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: read /etc/ethers - 0 addresses
Oct 14 22:24:39 TP-LINK_9864C0 daemon.warn exportfs[2350]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Oct 14 22:24:39 TP-LINK_9864C0 user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Oct 14 22:24:39 TP-LINK_9864C0 daemon.err exportfs[2350]: can't lock /var/lib/nfs/etab for writing
Oct 14 22:24:39 TP-LINK_9864C0 user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Oct 14 22:24:39 TP-LINK_9864C0 user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Oct 14 22:24:39 TP-LINK_9864C0 user.info sysinit: (Did you specify correct configuration file path?)
Oct 14 22:24:42 TP-LINK_9864C0 user.info sysinit: setting up led WLAN
Oct 14 22:24:42 TP-LINK_9864C0 user.info sysinit: setting up led USB
Oct 14 22:24:42 TP-LINK_9864C0 user.debug kernel: ar71xx-wdt: enabling watchdog timer
Oct 14 22:24:43 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 14 22:24:44 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCPDISCOVER(br-lan) 00:24:54:a4:82:da
Oct 14 22:24:44 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCPOFFER(br-lan) 192.168.1.168 00:24:54:a4:82:da
Oct 14 22:24:44 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCPREQUEST(br-lan) 192.168.1.216 00:23:7d:ad:88:1e
Oct 14 22:24:44 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCPACK(br-lan) 192.168.1.216 00:23:7d:ad:88:1e UDW-C4580
Oct 14 22:24:44 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCPREQUEST(br-lan) 192.168.1.168 00:24:54:a4:82:da
Oct 14 22:24:44 TP-LINK_9864C0 daemon.info dnsmasq-dhcp[2334]: DHCPACK(br-lan) 192.168.1.168 00:24:54:a4:82:da daniel-netbook
Oct 14 22:24:53 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 14 22:24:56 TP-LINK_9864C0 authpriv.info dropbear[2433]: Child connection from 192.168.1.168:49286
Oct 14 22:25:03 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 14 22:25:10 TP-LINK_9864C0 authpriv.notice dropbear[2433]: Password auth succeeded for 'root' from 192.168.1.168:49286
Oct 14 22:25:13 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
Oct 14 22:25:23 TP-LINK_9864C0 daemon.info hostapd: wlan0: STA 00:0b:6b:7c:69:03 IEEE 802.11: authenticated
18 2011-10-14 14:53:27
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
batu napisał/a:
Cezary napisał/a:Co masz w logu po restarcie routera?
Ja tak miałem jak sąsiad za ścianą nadawał na tym samym kanale. Wówczas wifi prawie w ogóle nie działało. Dopiero jak zmieniłem na wolny działa do dziś bez problemów.
Sprawdzę dziś wieczorem, jak tylko dotrę do domu.
Podpowiedzcie mi, bo nie kojarzę. W oryginalnym oprogramowaniu jest możliwość ustawienia kanału na AUTO. Czy OpenWrt/Gargoyle ma także taką możliwość?
Jak dobrze pamiętam na ostatnim OpenWrt kiedy ustawiałem kanał na AUTO w LuCI wyłączało mi się radio i na tym się kończyła cała zabawa.
19 2011-10-13 22:27:54
Odp: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
A w ogóle włączasz wifi? Bo domyślnie jest wyłączone w konfigu...
Oczywiście, że jest włączone.
20 2011-10-12 22:25:01
Temat: [SOLVED] TL-WR1043ND WiFi tylko z oryginalnym firmware (26 odpowiedzi, napisanych Oprogramowanie / Software)
Witam,
nie wiem co jest grane, ale u mnie WiFi działa prawidłowo wyłącznie wtedy, gdy w routerku siedzi oryginalny firmware producenta.
Jeżeli wgram OpenWrt albo Gargoyle (EN lub PL) to nie ma szans na to, żeby WiFi działało prawidłowo. Niby komputer dostaje adres, ale routera już pingować nie mogę, o zarządzeniu routerem przez web lub przejrzeniu jakiejkolwiek strony internetowej w ogóle mogę zapomnieć.
Jak podłączę po kablu, bez restartu routera, to wszystko śmiga, aż miło.
Nie wiem jak ugryźć temat. Jakie dane muszę dostarczyć, aby ktoś mógł mi pomóc?
Wykluczam wadę samego routera, bo na oryginalnym firmware chodzi.
Bardzo proszę o pomoc.
21 2011-08-20 08:51:48
Odp: Problem z lączeniem przez wifi (25 odpowiedzi, napisanych Oprogramowanie / Software)
Po dokładniejszym zbadaniu problemu zdecydowałem się reklamować swój router tym bardziej, że udało mi się doprowadzić do sytuacji wyłączenia radia również podczas pracy w trybie mixed bg (w trybie n only i g only również).
Niemniej jednak dzięki za zainteresowanie tematem.
22 2011-08-20 06:12:06
Odp: Problem z lączeniem przez wifi (25 odpowiedzi, napisanych Oprogramowanie / Software)
@Cezary
A czy istnieją może jakieś programowe narzędzia, które pomogą mi ocenić czy sprzęt fizycznie wygląda na sprawny czy nie?
Pytam, bo w tym temacie zupełnie się nie orientuję.
23 2011-08-20 05:58:08
Odp: Problem z lączeniem przez wifi (25 odpowiedzi, napisanych Oprogramowanie / Software)
@janek125
Szczerze powiedziawszy mnie bardziej irytują problemy z wyłączającym się radiem.
Jest to dla mnie o tyle niepokojące, że występuje zarówno na Gargoyle jak i oryginalnym oprogramowaniu producenta. Poza tym gdy chciałem dokładniej sprawdzić, czy u mnie pojawia się opisany przez Ciebie problem okazało się, że nie. Mogę wyłączać i włączać kartę do woli i póki działa radio w routerze, karta też działa i łączność jest zapewniona.
Zastanawiam się w związku z tym, czy nie reklamować routera w ramach gwarancji.
24 2011-08-18 19:32:47
Odp: Problem z lączeniem przez wifi (25 odpowiedzi, napisanych Oprogramowanie / Software)
Wydaje się, że u mnie problem wygląda jeszcze inaczej.
Otóż router działa sobie sprawnie przez bliżej nieokreślony czas, po upływie którego sprzęt zachowuje się tak, jakby radio przestawało działać.
Sądzę jednak, że może to być spowodowane sterownikiem linuksowym do karty WiFi netbooka.
Ze względu na to, że nie mam innej możliwości weryfikacji moich przypuszczeń zainstalowałem Windows'a i aktualnie testuję zachowanie sprzętu. Jeżeli wszystko będzie działać dobrze stawiam na sterownik karty, a nie wadę routera czy jego oprogramowania.
Dodam jeszcze, że problem występuje zarówno na Gargoyle jak i oryginalnym oprogramowaniu producenta.
25 2011-08-16 14:35:12
Odp: Problem z lączeniem przez wifi (25 odpowiedzi, napisanych Oprogramowanie / Software)
Na początek chciałbym się przywitać ze wszystkimi, a następnie podzielić się z Wami informacją, że mam podobny problem na routerze TP-Link 1043ND v. 1.8.
Zauważyłem, że występuje on tylko wtedy, gdy ustawię radio w tryb B+G+N.
Po przestawieniu w tryb B+G nie ma żadnego problemu.
Ponadto mam wrażenie, że opisana sytuacja dotyczy wyłącznie urządzeń, które potrafią obsłużyć tryb N i aktualnie w nim pracują.
Wniosek stąd, że w czasie gdy pojawia się problem w komunikacji router <-> netbook pracujący w standardzie N nie ma problemu z komunikacją router <-> komputer stacjonarny czy router <-> telefon, które są w stanie obsłużyć co najwyżej tryb G.
Znalezione posty: 25
Strony 1
eko.one.pl → Posty przez dundee
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc