https://3dtoday.ru/blogs/eta4ever/octop … g-openwrt/
Tu też coś jest. Szczerze to szukałem kiedyś ale mój terminal (igel) został bezrobotny i na nim zainstalowałem sobie Raspberry Pi Desktop i octoprint śmiga. Gdyby dało się octoprinta na openwrt to przesiadłbym się z chęcią 
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 9 z 24)
eko.one.pl → Posty przez palibrzuch
Znalezione posty: 201 do 225 z 599
201 2021-04-01 07:19:12
Odp: Drukarka 3D (44 odpowiedzi, napisanych Oprogramowanie / Software)
202 2021-04-01 07:04:29
Odp: Jeżyk i openwrt ? czemu nie [x86] [4fun] (348 odpowiedzi, napisanych Sprzęt / Hardware)
Miałem t620 i t630 żaden nie brał poniżej 10W. Jak odpalisz na nim jakiegoś linuxa to pobiera w idle jakieś 9W ale nigdy na openwrt nie zeszło poniżej 10W. Oczywiście piszę tu o openwrt odpalonym z pena bez żadnych dysków, bez karty wifi.
203 2021-03-14 13:37:55
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Zmieniłem dts i nadal nie instaluje się. W trakcie kompilacji sprawdzam sobie prędkość na na ori sofcie, przez ścianę około 3m od routera. Standardowe ustawienia wifi.
Wrócę chyba do jeżyka i g10 za AP zrobię.
Jestem ciekaw jak teraz na ddwrt śmiga ale boję się, że nie wrócę do ori lub openwrt.
edit
Po czystej kompilacji nadal nie wstaje. Na dziś koniec 
edit
Kurde nie doczytałem, że jeszcze jedną rzecz trzeba zmienić i ruszyło
Po LAN mam 900Mb ale wifi bez zmian. Daleko jeszcze do 600
edit
Po wstępnych ustawieniach udaje się wyłapać wifi w okolicach 500Mb
Kombinuję jeszcze ze sterownikami.
Jak na razie z tym nss router pracuje stabilnie. Wrzuciłem wszystkie swoje konfiguracje i kompilacja przebiega już bez problemu, obraz wgrywa się.
Tu w tym samym miejscu tylko, ze na openwrt
Całkiem całkiem teraz wifi lata
204 2021-03-13 21:16:41
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Cezary napisał/a:
No ale mój to czysty bez żadnych modyfikacji, a ty dodajesz nss do niego.
Wiem, wiem
Królik napisał/a:
A możesz to 5.10 z git huba skompilować i sprawdzić czy działa?
Jutro będę kompilował bo są jakieś zmiany w .dts
Może ruszy
205 2021-03-13 20:33:39
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Kolejne dwie aktualizacje nie przynoszą rezultatu. Router nie przyjmuje softu Za to obraz Cezarego na jednym śmiga jak zły
206 2021-03-04 20:20:44
Odp: Jeżyk i openwrt ? czemu nie [x86] [4fun] (348 odpowiedzi, napisanych Sprzęt / Hardware)
Czy w tym nowym pfsense można robić sieć TOR, zerotier? Wireguard z tego co pisałeś w innym temacie to śmiga. Ja na wyjściu mam tylko 50Mb to i tak każdy router takie prędkości obsługiwał
Te nowe pfsense masz na jeżyku zainstalowane?
207 2021-03-04 18:38:48
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
To niestety modyfikacje .dts nie przynoszą efektu 
208 2021-03-04 17:44:52
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Chyba wrócę do mojego jeżyka a z jednego G10 zrobię AP bo teraz próbowałem już -enty obraz z nss i dalej nie instaluje się na routerze. Na chwilę na ori sofcie będąc w pokoju obok jakieś 4m od routera bez żadnych ustawień wifi bez problemu leciało 590Mb gdzie na openwrt to można o tym zapomnieć
To jeszcze tylko spytam odnośnie jednej rzeczy.
Otwieram plik .dts w edytorze tekstu, zmieniam jego zawartość, zapisuję, daję make dirclean, robię make.
Czy może po zmianie pliku .dts powinienem zrobić coś jeszcze?
Może ja coś źle robię skoro jeden gość w tamtym temacie pisał, że mu działa?
209 2021-03-04 16:49:51
Odp: Własna kompilacja openwrt (125 odpowiedzi, napisanych Oprogramowanie / Software)
Ustawienia raczej te same co wcześniej miałem ale to jak pojawi się problem przy następnym obrazie to zrobię zrzuty. Uhttpd sprawdzałem przez ssh i ustawienia były identyczne z działającym identycznym routerem. Będę wgrywał nowy i zobaczymy czy problem się powtórzy.
210 2021-03-04 16:41:35
Odp: Własna kompilacja openwrt (125 odpowiedzi, napisanych Oprogramowanie / Software)
Po nowej kompilacji obrazu zamiast otwierać stronę z luci to chce mi pobierać plik. Ktoś wie o co chodzi? Router normalnie działa, ma wszystkie ustawienia z kompilacji, dostęp po ssh normalnie jest. Przez ssh usuwałem luci i instalowałem na nowo, bez zmian, chce pobierać plik ale nie zrobiłem zrzutu jaki to plik.
211 2021-03-04 12:13:30
Odp: Zmiany w wydaniu OpenWrt 21.02 (515 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
xrace napisał/a:salceson napisał/a:https://postimg.cc/BXR32FkZ dashboard
Ładna
Z nowości to jest jeszcze analiza pasma wifi w luci.
Fajnie to nawet pokazuje
212 2021-03-03 11:14:30
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Wiesz ja przy kompilacji też zaznaczałem Twoje statystyki ale chyba nie zawsze były na ON
Ciekawe dlaczego pokazuje tyle temp cpu?
213 2021-03-03 10:59:39
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Na jednym zainstalowałem sobie obraz Cezarego Dzięki za kompilację, jak na razie działa wzorowo Fajnie pokazuje temperatury
BusyBox v1.33.0 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------------------------------
| |
| OpenWrt 21.02-SNAPSHOT, r15866-17a627ec82 |
| |
| Build time: 2021-03-01 17:56 CET |
| Cezary Jackiewicz, https://eko.one.pl |
| |
-----------------------------------------------------------------------------
| Machine: ASRock G10 |
| Uptime: 0d, 01:53:07 |
| Load: 0.35 0.27 0.22 |
| Flash: total: 28.9MB, free: 7.6MB, used: 72% |
| Memory: total: 466.7MB, free: 390.4MB, used: 16% |
| Leases: 2 |
| lan: static, 192.168.2.1 |
| wan: dhcp, ? |
| wan6: dhcpv6, ? |
| wwan: dhcp, 192.168.1.234 |
| home: none, ? |
| radio1: wwan, mode: sta, ssid: UPC242xxx279, channel: 11, conn: 1 |
| radio1: lan, mode: ap, ssid: kwatera, channel: 11, conn: 2 |
| radio0: lan, mode: ap, ssid: 5G towaru, channel: auto, conn: 0 |
-----------------------------------------------------------------------------
| CPU freq: 600.00MHz, 600.00MHz, 1.40GHz, 1.40GHz |
| CPU temperature: 61.75 C, 61.75 C, 58.30 C, 61.16 C, 60.58 C, 60.00 C, 60.56 C, 60.56 C, 62.37 C, 56.04 C, 62.37 C |
| Wi-Fi chip temp: 50.00 C, 55.00 C |
-----------------------------------------------------------------------------
root@OpenWrt:~#214 2021-02-27 17:25:50
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Chyba coś skopałem bo obraz dalej nie instaluje się
Watchdog handover: fd=3
- watchdog -
killall: telnetd: no process killed
killall: ash: no process killed
Sat Feb 27 15:24:58 UTC 2021 upgrade: Sending TERM to remaining processes ... hostapd wpa_supplicant[26632.844305] wlan1: deauthenticating from fc:6f:b7:88:a1:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[26632.844549] ath10k_pci 0001:01:00.0: mac flush vdev 1 drop 1 queues 0x2 ar->paused: 0x0 arvif->paused: 0x0
[26632.853133] ath10k_pci 0001:01:00.0: mac flush vdev 1 drop 0 queues 0x2 ar->paused: 0x0 arvif->paused: 0x0
[26632.865023] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
[26632.872324] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
netifd odhcpd apcupsd crond[26632.888399] device wlan1-1 left promiscuous mode
[26632.888471] br-lan: port 2(wlan1-1) entered disabled state
uhttpd zerotier-one ntpd dnsmasq ubusd askfirst urngd[26632.932433] ath10k_pci 0001:01:00.0: mac flush null vif, drop 0 queues 0xffff
[26632.933686] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
[26632.938684] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
logd rpcd
[26632.995991] device wlan0 left promiscuous mode
[26632.996131] br-lan: port 3(wlan0) entered disabled state
[26633.027756] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
[26633.030473] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[26633.034003] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Sat Feb 27 15:25:01 UTC 2021 upgrade: Sending KILL to remaining processes ... zerotier-one
[26637.208172] sh (5314): drop_caches: 3
Sat Feb 27 15:25:03 UTC 2021 upgrade: Switching to ramdisk...
[26639.262054] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[26639.271310] UBIFS (ubi0:2): un-mount UBI device 0
Sat Feb 27 15:25:05 UTC 2021 upgrade: Performing system upgrade...
384+0 records in
384+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
Unlocking /dev/mtd12 ...
Writing from /tmp/mtd12 to /dev/mtd12 ...
removing ubiblock0_1
[26640.077232] block ubiblock0_1: released
Volume ID 0, size 33 LEBs (4190208 bytes, 3.9 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "kernel", alignment 1
Volume ID 1, size 63 LEBs (7999488 bytes, 7.6 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1
Set volume size to 33521664
Volume ID 2, size 264 LEBs (33521664 bytes, 31.9 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[26645.903048] reboot: Restarting system
U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Jun 22 2015 - 19:44:46)
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:
NAND read from offset 1180000 failed -74
*** Warning - readenv() failed, using default environment
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
cdp: get part failed for 0:HLOS
Net: MAC1 addr:0:3:7f:ba:db:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init done
MAC2 addr:0:3:7f:ba:db:2
eth0, eth1
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Creating 1 MTD partitions on "nand0":
0x0000048a0000-0x0000078a0000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 3
UBI: available PEBs: 17
UBI: total number of reserved PEBs: 367
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 57/28
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4190208)
## Booting kernel from FIT Image at 44000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-5.4.99
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e4
Data Size: 4031567 Bytes = 3.8 MiB
Architecture: ARM
OS: Linux
Load Address: 0x42208000
Entry Point: 0x42208000
Hash algo: crc32
Hash value: e587aa27
Hash algo: sha1
Hash value: 0ce8e88fe5e9882c66fb493252eeece8664369da
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 44000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt asrock_g10 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x443d8668
Data Size: 31691 Bytes = 30.9 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 15be150c
Hash algo: sha1
Hash value: 35090e56bac8396d91fd54d42bc817ad80b4ebf6
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x443d8668
Uncompressing Kernel Image ... OK
Loading Device Tree to 5eaf5000, end 5eaffbca ... OK
Using machid 0x1260 from environment
Starting kernel ...
U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Jun 22 2015 - 19:44:46)
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:
NAND read from offset 1180000 failed -74
*** Warning - readenv() failed, using default environment
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
cdp: get part failed for 0:HLOS
Net: MAC1 addr:0:3:7f:ba:db:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init done
MAC2 addr:0:3:7f:ba:db:2
eth0, eth1
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Creating 1 MTD partitions on "nand0":
0x000001340000-0x000004340000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 3
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 384
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 73/19
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (2031616)
Image Name: linux-3.4.103
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1955608 Bytes = 1.9 MiB
Load Address: 41508000
Entry Point: 41508000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
device nand0 <nand0>, # parts = 1
#: name size offset mask_flags
0: fs 0x03000000 0x01340000 0
active partition: nand0,0 - (fs) 0x03000000 @ 0x01340000
defaults:
mtdids : none
mtdparts: none
Using machid 0x1260 from environment
Starting kernel ...
init started: BusyBox v1.19.4 (2017-03-07 17:41:12 CST)
377+0 records in
377+0 records out
377+0 records in
377+0 records out
NVRAM access daemon Ver. 1.0 Build 20170306160814
daemonize process
insmod: can't insert 'xt_mark': File exists
CMD_TEST
CMD_MODE
0+1 records in
1+0 records out
Unlocking BOOTCONFIG ...
Erasing BOOTCONFIG ...
Writing from <stdin> to BOOTCONFIG ...
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
1970-01-01 00:00:18: (plugin.c.131) Cannot load plugin mod_fastcgi more than once, please fix your config (we may not accept such configs in future releases
Interface doesn't accept private ioctl...
AMPDU (8BE0): Operation not permitted
Interface doesn't accept private ioctl...
vhtmubfee (8BE0): Invalid argument
Interface doesn't accept private ioctl...
AMPDU (8BE0): Operation not permitted
Interface doesn't accept private ioctl...
vhtmubfee (8BE0): Invalid argument
/bin/sh: can't create /sys/fast_classifier/skip_to_bridge_ingress: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/sync_freq: nonexistent directory
sysctl: short write
killall: thermald: no process killed
[G10 Media Center] running
cp: can't stat 'usr/lib/opkg/info_data/*': No such file or directory
Configuration file: /tmp/config_ap_w2g0
Please press Enter to activate this console. ath0: Could not connect to kernel driver
Using interface ath0 with hwaddr 74:da:38:6a:65:f6 and ssid "ASRock"
WPS: Converting display to virtual_display for WPS 2.0 compliance
WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
ath0: interface state UNINITIALIZED->ENABLED
ath0: AP-ENABLED
Configuration file: /tmp/config_ap_w5g0
athi5: Could not connect to kernel driver
Using interface athi5 with hwaddr 74:da:38:6a:65:f7 and ssid "ASRock_5G"
WPS: Converting display to virtual_display for WPS 2.0 compliance
WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
athi5: interface state UNINITIALIZED->ENABLED
athi5: AP-ENABLED
cat: can't open '/tmp/wan_status': No such file or directoryMuszę chyba bardziej do tego usiąść
edit
Pojawił się soft z łatką w repo ACwifidude.
Jutro testuję czy ruszy wink
edit
Niestety nadal jest ten sam problem. Obraz się nie instaluje. Skoro autor zmienił dts i nie zatrybiło to ja w żuciu tego nie zmienię. Szczegóły tutaj https://forum.openwrt.org/t/ipq806x-nss … /82525/385
Poczekam
edit
Teraz to już jaja się robią, zrobiłem czyste repo openwrt 21.02, skompilowałem sobie obraz i on się nie zainstalował. O co tu chodzi? Nie dawałem, żadnych nss drivers...
edit
Obraz factory ruszył z ori softu.
edit
W temacie głównym pojawiła się poprawka, niestety obraz się nie instaluje. Czekam dalej.
215 2021-02-23 20:43:26
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Przecież ja żartuję sobie trochę
Spokojnie
Chciałem tylko aby ktoś mi to bardziej trochę wytłumaczył
Usiądę sobie do tego w wolnej chwili zobaczę co i jak.
Dzięki za jakieś naprowadzenie
216 2021-02-23 19:36:47
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Nikt? Nic?
Taką odpowiedź dostałem
For the ASrock you’ll have to modify the .dts file so that your device can use the NSS drivers.
These are the changes I put together for similar ipq8064 devices, the ASrock will probably be similar to the eax500 changes.Ogólnie to ja w życiu tego nie zrobię. No cóż. Można powiedzieć, że 400 utopiłem bo router nie spełnia swojego zadania w sumie jeden będzie używany
A może za 4 lata ukaże się poprawka
Dobra jeba... nie ma co przeżywać może operator obniży mi internet do 500Mb i wtedy będzie jak znalazł
217 2021-02-23 17:35:52
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Dziś była aktualizacja tego repo i niestety budowanie od podstaw kończy się bez błędu ale image się nie instaluje.
Sysupgrade -n z openwrt przebiega tak
Tue Feb 23 15:53:09 UTC 2021 upgrade: Performing system upgrade...
384+0 records in
384+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
Unlocking /dev/mtd12 ...
Writing from /tmp/mtd12 to /dev/mtd12 ...
removing ubiblock0_1
[ 351.756410] block ubiblock0_1: released
Volume ID 0, size 33 LEBs (4190208 bytes, 3.9 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "kernel", alignment 1
Volume ID 1, size 63 LEBs (7999488 bytes, 7.6 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1
Set volume size to 33521664
Volume ID 2, size 264 LEBs (33521664 bytes, 31.9 MiB), LEB size 126976 bytes (12 4.0 KiB), dynamic, name "rootfs_data", alignment 1
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[ 357.219875] reboot: Restarting system
U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Jun 22 2015 - 19:44:46)
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:
NAND read from offset 1180000 failed -74
*** Warning - readenv() failed, using default environment
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
cdp: get part failed for 0:HLOS
Net: MAC1 addr:0:3:7f:ba:db:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init done
MAC2 addr:0:3:7f:ba:db:2
eth0, eth1
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Creating 1 MTD partitions on "nand0":
0x0000048a0000-0x0000078a0000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 3
UBI: available PEBs: 17
UBI: total number of reserved PEBs: 367
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 50/24
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4190208)
## Booting kernel from FIT Image at 44000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-5.4.99
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e4
Data Size: 4031567 Bytes = 3.8 MiB
Architecture: ARM
OS: Linux
Load Address: 0x42208000
Entry Point: 0x42208000
Hash algo: crc32
Hash value: e587aa27
Hash algo: sha1
Hash value: 0ce8e88fe5e9882c66fb493252eeece8664369da
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 44000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt asrock_g10 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x443d8668
Data Size: 31377 Bytes = 30.6 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 0439c99e
Hash algo: sha1
Hash value: bb860a74fa3466cb61d43f50204f7fc58c3b0722
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x443d8668
Uncompressing Kernel Image ... OK
Loading Device Tree to 5eaf5000, end 5eaffa90 ... OK
Using machid 0x1260 from environment
Starting kernel ...
U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Jun 22 2015 - 19:44:46)
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:
NAND read from offset 1180000 failed -74
*** Warning - readenv() failed, using default environment
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
cdp: get part failed for 0:HLOS
Net: MAC1 addr:0:3:7f:ba:db:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init done
MAC2 addr:0:3:7f:ba:db:2
eth0, eth1
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Creating 1 MTD partitions on "nand0":
0x000001340000-0x000004340000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 3
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 384
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 73/19
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (2031616)
UBI: fixable bit-flip detected at PEB 4
UBI: schedule PEB 4 for scrubbing
UBI: fixable bit-flip detected at PEB 4
UBI: fixable bit-flip detected at PEB 6
UBI: schedule PEB 6 for scrubbing
UBI: fixable bit-flip detected at PEB 6
UBI: fixable bit-flip detected at PEB 13
UBI: schedule PEB 13 for scrubbing
UBI: fixable bit-flip detected at PEB 13
UBI: fixable bit-flip detected at PEB 16
UBI: schedule PEB 16 for scrubbing
UBI: fixable bit-flip detected at PEB 16
Image Name: linux-3.4.103
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1955608 Bytes = 1.9 MiB
Load Address: 41508000
Entry Point: 41508000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
device nand0 <nand0>, # parts = 1
#: name size offset mask_flags
0: fs 0x03000000 0x01340000 0
active partition: nand0,0 - (fs) 0x03000000 @ 0x01340000
defaults:
mtdids : none
mtdparts: none
Using machid 0x1260 from environment
Starting kernel ...
init started: BusyBox v1.19.4 (2017-03-07 17:41:12 CST)
377+0 records in
377+0 records out
377+0 records in
377+0 records out
NVRAM access daemon Ver. 1.0 Build 20170306160814
daemonize process
insmod: can't insert 'xt_mark': File exists
CMD_TEST
CMD_MODE
0+1 records in
1+0 records out
Unlocking BOOTCONFIG ...
Erasing BOOTCONFIG ...
Writing from <stdin> to BOOTCONFIG ...
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
1970-01-01 00:00:19: (plugin.c.131) Cannot load plugin mod_fastcgi more than onc e, please fix your config (we may not accept such configs in future releases
Interface doesn't accept private ioctl...
AMPDU (8BE0): Operation not permitted
Interface doesn't accept private ioctl...
vhtmubfee (8BE0): Invalid argument
Interface doesn't accept private ioctl...
AMPDU (8BE0): Operation not permitted
Interface doesn't accept private ioctl...
vhtmubfee (8BE0): Invalid argument
/bin/sh: can't create /sys/fast_classifier/skip_to_bridge_ingress: nonexistent d irectory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_ cpu_load: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_mult i_core: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq: non existent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/sync_freq: nonexi stent directory
sysctl: short write
killall: thermald: no process killed
[G10 Media Center] running
cp: can't stat 'usr/lib/opkg/info_data/*': No such file or directory
Configuration file: /tmp/config_ap_w2g0
Please press Enter to activate this console. ath0: Could not connect to kernel d river
Using interface ath0 with hwaddr 74:da:38:6a:65:f6 and ssid "ASRock"
WPS: Converting display to virtual_display for WPS 2.0 compliance
WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
ath0: interface state UNINITIALIZED->ENABLED
ath0: AP-ENABLED
Configuration file: /tmp/config_ap_w5g0
athi5: Could not connect to kernel driver
Using interface athi5 with hwaddr 74:da:38:6a:65:f7 and ssid "ASRock_5G"
WPS: Converting display to virtual_display for WPS 2.0 compliance
WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
athi5: interface state UNINITIALIZED->ENABLED
athi5: AP-ENABLED
cat: can't open '/tmp/wan_status': No such file or directoryTak wygląda aktualizacja factory z ori softu
The system is going down NOW!
quit
Sent SIGTERM to all processes
[G10 Media Center] stopped
Sent SIGKILL to all processes
Requesting system reboot
U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Jun 22 2015 - 19:44:46)
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:
NAND read from offset 1180000 failed -74
*** Warning - readenv() failed, using default environment
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
cdp: get part failed for 0:HLOS
Net: MAC1 addr:0:3:7f:ba:db:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init done
MAC2 addr:0:3:7f:ba:db:2
eth0, eth1
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Creating 1 MTD partitions on "nand0":
0x0000048a0000-0x0000078a0000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: fixable bit-flip detected at PEB 260
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 3
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 384
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 52/25
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4190208)
## Booting kernel from FIT Image at 44000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-5.4.99
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e4
Data Size: 4031567 Bytes = 3.8 MiB
Architecture: ARM
OS: Linux
Load Address: 0x42208000
Entry Point: 0x42208000
Hash algo: crc32
Hash value: e587aa27
Hash algo: sha1
Hash value: 0ce8e88fe5e9882c66fb493252eeece8664369da
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 44000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt asrock_g10 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x443d8668
Data Size: 31377 Bytes = 30.6 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 0439c99e
Hash algo: sha1
Hash value: bb860a74fa3466cb61d43f50204f7fc58c3b0722
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x443d8668
Uncompressing Kernel Image ... OK
Loading Device Tree to 5eaf5000, end 5eaffa90 ... OK
Using machid 0x1260 from environment
Starting kernel ...
U-Boot 2012.07 [Standard IPQ806X.LN,r40331] (Jun 22 2015 - 19:44:46)
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:
NAND read from offset 1180000 failed -74
*** Warning - readenv() failed, using default environment
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
cdp: get part failed for 0:HLOS
Net: MAC1 addr:0:3:7f:ba:db:1
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init done
MAC2 addr:0:3:7f:ba:db:2
eth0, eth1
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Creating 1 MTD partitions on "nand0":
0x000001340000-0x000004340000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 3
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 384
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 73/19
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (2031616)
Image Name: linux-3.4.103
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1955608 Bytes = 1.9 MiB
Load Address: 41508000
Entry Point: 41508000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
device nand0 <nand0>, # parts = 1
#: name size offset mask_flags
0: fs 0x03000000 0x01340000 0
active partition: nand0,0 - (fs) 0x03000000 @ 0x01340000
defaults:
mtdids : none
mtdparts: none
Using machid 0x1260 from environment
Starting kernel ...
init started: BusyBox v1.19.4 (2017-03-07 17:41:12 CST)
377+0 records in
377+0 records out
377+0 records in
377+0 records out
NVRAM access daemon Ver. 1.0 Build 20170306160814
daemonize process
insmod: can't insert 'xt_mark': File exists
CMD_TEST
CMD_MODE
0+1 records in
1+0 records out
Unlocking BOOTCONFIG ...
Erasing BOOTCONFIG ...
Writing from <stdin> to BOOTCONFIG ...
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
SSDK Init OK!
operate done.
1970-01-01 00:00:18: (plugin.c.131) Cannot load plugin mod_fastcgi more than once, please fix your config (we may not accept such configs in future releases
Interface doesn't accept private ioctl...
AMPDU (8BE0): Operation not permitted
Interface doesn't accept private ioctl...
vhtmubfee (8BE0): Invalid argument
Interface doesn't accept private ioctl...
AMPDU (8BE0): Operation not permitted
Interface doesn't accept private ioctl...
vhtmubfee (8BE0): Invalid argument
/bin/sh: can't create /sys/fast_classifier/skip_to_bridge_ingress: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq: nonexistent directory
/bin/sh: can't create /sys/devices/system/cpu/cpufreq/ondemand/sync_freq: nonexistent directory
sysctl: short write
killall: thermald: no process killed
[G10 Media Center] running
cp: can't stat 'usr/lib/opkg/info_data/*': No such file or directory
Configuration file: /tmp/config_ap_w2g0
Please press Enter to activate this console. ath0: Could not connect to kernel driver
Using interface ath0 with hwaddr 74:da:38:6a:65:f6 and ssid "ASRock"
WPS: Converting display to virtual_display for WPS 2.0 compliance
WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
ath0: interface state UNINITIALIZED->ENABLED
ath0: AP-ENABLED
Configuration file: /tmp/config_ap_w5g0
athi5: Could not connect to kernel driver
Using interface athi5 with hwaddr 74:da:38:6a:65:f7 and ssid "ASRock_5G"
WPS: Converting display to virtual_display for WPS 2.0 compliance
WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
athi5: interface state UNINITIALIZED->ENABLED
athi5: AP-ENABLED
cat: can't open '/tmp/wan_status': No such file or directoryOczywiście za każdym razem przywraca oryginalny soft.
Co tu jest nie tak?
Obraz pobrany z openwrt bez problemu wchodzi, czy to factory czy sysupgrade.
Moje obrazy też wchodzą bez problemu.
Z tego repo https://github.com/ACwifidude/openwrt nic nie chce się instalować mimo bezbłędnej kompilacji...
218 2021-02-22 06:34:30
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Nowy obraz zbudowało bez problemu. Daję sysupgrade -n i niestety przywraca mi oryginalny soft. Na oryginalnym robię reset dla pewności, wrzucam factory i dalej odpala się oryginalny soft.
Ściągam factory ze strony openwrt (swój obraz mam tylko sysupgrade bo zapomniałem zgrać a minta musiałem usunąć z laptopa) odpala się z nowym softem openwrt.
Coś musi być nie tak. Robiłem wszystko według zaleceń.
Chyba trzeba podłączyć serial i wtedy zobaczę co tam się dzieje.
219 2021-02-21 20:06:35
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Dobra, z pomocą ACwifidude z openwrt udało się zbudować obraz bez większych problemów.
Jutro wrzucę i przetestuję. Oby to coś pomogło bo w innym wypadku leci od razu na alledrogo. Jeden sobie zatrzymam bo zwiększył mi przepustowość w piwniczce dwukrotnie.
edit
No i niestety, sysupgrade -n i niestety znowu przywróciło mi ori soft.
Zrobiłem clean i dirclean. Buduję jeszcze raz.
220 2021-02-21 10:30:51
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Niestety jak dla mnie to czarna magia...
Cały czas jak miałem włączone flow offloading to max co osiągam po LAN to 350Mb.
Ale jak wyłączę to mam 530Mb
221 2021-02-21 09:27:22
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Zbudowałem obraz ale niestety po sysupgrade -n wróciło mi ori oprogramowanie.
Robiąc tak
git clone -b kernel5.4-nss-qsdk10.0 https://github.com/ACwifidude/openwrt.git
cd openwrt
git remote add upstream https://git.openwrt.org/openwrt/openwrt.git
git fetch upstream && git rebase upstream/master && ./scripts/feeds update -a && ./scripts/feeds install -a && cp diffconfig .config && make defconfig && ./scripts/getver.sh
make -j5Wywala mi błąd
xxx@xyz:~/openwrt$ git fetch upstream && git rebase upstream/master && ./scripts/feeds update -a && ./scripts/feeds install -a && cp diffconfig .config && make defconfig && ./scripts/getver.sh
error: nie można wykonać rebase: masz nieprzygotowane zmiany.
error: Złóż je lub dodaj do schowka.
xxx@xyz:~/openwrt$ Obecnie obraz budowałem z tego i nie działa, przy kompilacji wszystko jest ok, 0 błędów ale po wgraniu wraca mi ori soft. Z ori softu też nie wgrywa się factory, router się resetuje i dalej jest ori soft.
xxx@xyz:~/openwrt$ git checkout
M bin/packages/arm_cortex-a15_neon-vfpv4/base/Packages
M bin/packages/arm_cortex-a15_neon-vfpv4/base/Packages.gz
M bin/packages/arm_cortex-a15_neon-vfpv4/base/Packages.manifest
M bin/packages/arm_cortex-a15_neon-vfpv4/base/Packages.sig
M bin/packages/arm_cortex-a15_neon-vfpv4/base/libjson-c5_0.15-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/packages/arm_cortex-a15_neon-vfpv4/base/libopenssl1.1_1.1.1i-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/packages/arm_cortex-a15_neon-vfpv4/base/libubus20191227_2020-12-04-d1d9ddf9-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/packages/arm_cortex-a15_neon-vfpv4/base/libwolfssl24_4.6.0-stable-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/packages/arm_cortex-a15_neon-vfpv4/base/wpad-basic-wolfssl_2020-06-08-5a8b3662-30_arm_cortex-a15_neon-vfpv4.ipk
M bin/packages/arm_cortex-a15_neon-vfpv4/freifunk/Packages.sig
M bin/packages/arm_cortex-a15_neon-vfpv4/luci/Packages.sig
M bin/packages/arm_cortex-a15_neon-vfpv4/packages/Packages.sig
M bin/packages/arm_cortex-a15_neon-vfpv4/routing/Packages.sig
M bin/packages/arm_cortex-a15_neon-vfpv4/telephony/Packages.sig
D bin/targets/ipq806x/generic/C2600-20210207-MasterNSS-factory.bin
D bin/targets/ipq806x/generic/C2600-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/C2600-20210207-MasterNSS-sysupgrade.bin
D bin/targets/ipq806x/generic/EA7500V1-20210207-MasterNSS-factory.bin
D bin/targets/ipq806x/generic/EA7500V1-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/EA7500V1-20210207-MasterNSS-sysupgrade.bin
D bin/targets/ipq806x/generic/EA8500-20210207-MasterNSS-factory.bin
D bin/targets/ipq806x/generic/EA8500-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/EA8500-20210207-MasterNSS-sysupgrade.bin
D bin/targets/ipq806x/generic/NBG6817-20210207-MasterNSS-factory.bin
D bin/targets/ipq806x/generic/NBG6817-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/NBG6817-20210207-MasterNSS-sysupgrade.bin
D bin/targets/ipq806x/generic/R7500V1-20210207-MasterNSS-factory.img
D bin/targets/ipq806x/generic/R7500V1-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/R7500V1-20210207-MasterNSS-sysupgrade.bin
D bin/targets/ipq806x/generic/R7500V2-20210207-MasterNSS-factory.img
D bin/targets/ipq806x/generic/R7500V2-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/R7500V2-20210207-MasterNSS-sysupgrade.bin
D bin/targets/ipq806x/generic/R7800-20210207-MasterNSS-factory.img
D bin/targets/ipq806x/generic/R7800-20210207-MasterNSS-initramfs-uImage
D bin/targets/ipq806x/generic/R7800-20210207-MasterNSS-sysupgrade.bin
M bin/targets/ipq806x/generic/config.buildinfo
M bin/targets/ipq806x/generic/feeds.buildinfo
D bin/targets/ipq806x/generic/openwrt-ipq806x-generic.manifest
M bin/targets/ipq806x/generic/packages/Packages
M bin/targets/ipq806x/generic/packages/Packages.gz
M bin/targets/ipq806x/generic/packages/Packages.manifest
M bin/targets/ipq806x/generic/packages/Packages.sig
D bin/targets/ipq806x/generic/packages/base-files_1403-r15696+18-17fa01bb79_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/iptables-mod-conntrack-extra_1.8.7-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/iptables-mod-ipopt_1.8.7-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/iptables_1.8.7-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kernel_5.4.95-1-9269b3aa9f2ee236223f6e50e0814635_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ata-ahci-platform_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ata-ahci_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ata-core_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ath10k-ct_5.4.95+2021-01-11-9fe1df7d-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ath_5.4.95+5.8.18-1-5_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-bonding_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-br-netfilter_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-cfg80211_5.4.95+5.8.18-1-5_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-acompress_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-aead_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-arc4_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-authenc_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-cbc_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-ccm_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-cmac_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-crc32c_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-ctr_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-deflate_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-des_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-ecb_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-echainiv_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-hash_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-hmac_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-manager_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-md4_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-md5_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-null_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-pcompress_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-rng_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-seqiv_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-sha1_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-sha256_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-crypto-sha512_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-cryptodev_5.4.95+1.11-ipq806x-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-fs-cifs_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-fs-exfat_5.4.95+5.10.1-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-fs-ext4_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-fs-hfsplus_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-fs-msdos_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-fs-vfat_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-fuse_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-gpio-button-hotplug_5.4.95-3_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-hwmon-core_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-ifb_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ip6tables_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipsec_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-ipt-conntrack-extra_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-conntrack_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-core_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-extra_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-ipt-ipopt_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-ipt-ipset_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-nat6_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-nat_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-offload_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ipt-physdev_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-ipt-raw_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-iptunnel4_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-iptunnel_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-leds-gpio_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-lib-crc-ccitt_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-lib-crc16_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-lib-zlib-deflate_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-lib-zlib-inflate_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-mac80211_5.4.95+5.8.18-1-5_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-nf-conntrack-netlink_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-conntrack6_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-conntrack_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-flow_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-ipt6_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-ipt_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-nat6_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-nat_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-reject6_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nf-reject_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-nfnetlink_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-base_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-cp1250_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-cp437_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-cp850_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-iso8859-15_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-iso8859-1_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nls-utf8_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-nss-ifb_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-phy-qcom-ipq806x-usb_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-ppp_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-pppoe_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-pppox_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-qca-nss-crypto_5.4.95+e7651c29-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-qca-nss-drv-pppoe_5.4.95+740d0102-2_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-qca-nss-drv-qdisc_5.4.95+740d0102-2_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-qca-nss-drv_5.4.95+809a00de-2_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-qca-nss-ecm-standard_5.4.95+9228212b-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-qca-nss-gmac_5.4.95+9b74deef-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-sched-cake_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-sched-core_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-scsi-core_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-sit_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-slhc_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-tun_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-udptunnel4_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-udptunnel6_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-core_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-dwc3-qcom_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-dwc3_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-ehci_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-ledtrig-usbport_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-ohci_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb-storage_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb2_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/kmod-usb3_5.4.95-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/kmod-wireguard_5.4.95+1.0.20201112-1_arm_cortex-a15_neon-vfpv4.ipk
D bin/targets/ipq806x/generic/packages/libiwinfo-lua_2021-01-06-23d2722b-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/packages/libxtables12_1.8.7-1_arm_cortex-a15_neon-vfpv4.ipk
M bin/targets/ipq806x/generic/sha256sums
M bin/targets/ipq806x/generic/version.buildinfo
M diffconfig
Twoja gałąź jest na bieżąco z „origin/kernel5.4-nss-qsdk10.0”.Ktoś mógłby pomóc co robię nie tak?
Wchodząc do make menuconfig mam mniej opcji niż normalnie jak budowałem. To normalne?
W temacie na openwrt twórca mi coś odpisał ale nie bardzo to rozumiem.
NSS patch for mac80211 and the shortcut-fe package are both struggling with the updates to master. My build doesn’t use shortcut-fe so I’ll probably remove it. I’ll need some help with the NSS mac80211 offloading patch.222 2021-02-20 16:51:51
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Wywala mi jakieś błędy przy kompilacji.......
Applying ./patches/001-compile.patch using plaintext:
patching file tools/env/Makefile
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.prepared_9dc59a75c80936fa44c463f13460e8b8_6664517399ebbbc92a37c5bb081b5c53
rm -f /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.configured_*
rm -f /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.uboot-envtools_installed
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/include/config.h
mkdir -p /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/include/config
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/include/config/auto.conf
mkdir -p /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/include/generated
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/include/generated/autoconf.h
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.configured_68b329da9893e34099c7d8ad5cb9c940
rm -f /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.built
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.built_check
CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04=u-boot-2020.04 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/include -I/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include/fortify -I/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include " CXXFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04=u-boot-2020.04 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/include -I/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include/fortify -I/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/include " LDFLAGS="-L/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/lib -L/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/lib -znow -zrelro " make --jobserver-auth=3,4 -C /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/. AR="arm-openwrt-linux-muslgnueabi-gcc-ar" AS="arm-openwrt-linux-muslgnueabi-gcc -c -Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04=u-boot-2020.04 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" LD=arm-openwrt-linux-muslgnueabi-ld NM="arm-openwrt-linux-muslgnueabi-gcc-nm" CC="arm-openwrt-linux-muslgnueabi-gcc" GCC="arm-openwrt-linux-muslgnueabi-gcc" CXX="arm-openwrt-linux-muslgnueabi-g++" RANLIB="arm-openwrt-linux-muslgnueabi-gcc-ranlib" STRIP=arm-openwrt-linux-muslgnueabi-strip OBJCOPY=arm-openwrt-linux-muslgnueabi-objcopy OBJDUMP=arm-openwrt-linux-muslgnueabi-objdump SIZE=arm-openwrt-linux-muslgnueabi-size CROSS="arm-openwrt-linux-muslgnueabi-" ARCH="arm" TARGET_CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04=u-boot-2020.04 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro" TARGET_LDFLAGS="-L/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/usr/lib -L/home/xxx/openwrt/staging_dir/toolchain-arm_cortex-a15+neon-vfpv4_gcc-8.4.0_musl_eabi/lib -znow -zrelro" no-dot-config-targets=envtools envtools ;
make[4]: Entering directory '/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04'
CHK include/config/uboot.release
HOSTCC scripts/basic/fixdep
CHK include/generated/timestamp_autogenerated.h
COPY tools/version.h
UPD include/generated/timestamp_autogenerated.h
UPD include/config/uboot.release
CHK include/generated/version_autogenerated.h
UPD include/generated/version_autogenerated.h
LD tools/env/built-in.o
HOSTCC tools/env/crc32.o
HOSTCC tools/env/ctype.o
HOSTCC tools/env/env_attr.o
HOSTCC tools/env/env_flags.o
HOSTCC tools/env/fw_env.o
HOSTCC tools/env/linux_string.o
HOSTCC tools/env/fw_env_main.o
AR tools/env/lib.a
HOSTLD tools/env/fw_printenv
STRIP tools/env/fw_printenv
make[4]: Leaving directory '/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04'
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.built
rm -rf /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools.installed /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools
mkdir -p /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools
install -d -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/usr/sbin
install -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/tools/env/fw_printenv /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/usr/sbin
ln -sf fw_printenv /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/usr/sbin/fw_setenv
install -d -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/lib
install -m0644 ./files/uboot-envtools.sh /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/lib
install -d -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/etc/uci-defaults
install -m0644 ./files/ipq806x /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/etc/uci-defaults/30_uboot-envtools
touch /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools.installed
mkdir -p /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/root-ipq806x/stamp
SHELL= flock /home/xxx/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/.pkgdir/uboot-envtools/. /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/root-ipq806x/'
touch /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/root-ipq806x/stamp/.uboot-envtools_installed
removed '/home/xxx/openwrt/bin/targets/ipq806x/generic/packages/uboot-envtools_2020.04-84_arm_cortex-a15_neon-vfpv4.ipk'
mkdir -p /home/xxx/openwrt/bin/targets/ipq806x/generic/packages /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/CONTROL /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/pkginfo
install -d -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/usr/sbin
install -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/tools/env/fw_printenv /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/usr/sbin
ln -sf fw_printenv /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/usr/sbin/fw_setenv
install -d -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/lib
install -m0644 ./files/uboot-envtools.sh /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/lib
install -d -m0755 /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/etc/uci-defaults
install -m0644 ./files/ipq806x /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/etc/uci-defaults/30_uboot-envtools
find /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf
export CROSS="arm-openwrt-linux-muslgnueabi-" NO_RENAME=1 ; NM="arm-openwrt-linux-muslgnueabi-nm" STRIP="/home/xxx/openwrt/staging_dir/host/bin/sstrip -z" STRIP_KMOD="/home/xxx/openwrt/scripts/strip-kmod.sh" PATCHELF="/home/xxx/openwrt/staging_dir/host/bin/patchelf" /home/xxx/openwrt/scripts/rstrip.sh /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools
rstrip.sh: /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/usr/sbin/fw_printenv: executable
(cd /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/CONTROL; ( echo "$CONTROL"; printf "Description: "; echo "$DESCRIPTION" | sed -e 's,^[[:space:]]*, ,g'; ) > control; chmod 644 control; ( echo "#!/bin/sh"; echo "[ \"\${IPKG_NO_SCRIPT}\" = \"1\" ] && exit 0"; echo "[ -s "\${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_postinst \$0 \$@"; ) > postinst; ( echo "#!/bin/sh"; echo "[ -s "\${IPKG_INSTROOT}/lib/functions.sh" ] || exit 0"; echo ". \${IPKG_INSTROOT}/lib/functions.sh"; echo "default_prerm \$0 \$@"; ) > prerm; chmod 0755 postinst prerm; echo "$V_Package_uboot_envtools_conffiles" > conffiles; )
install -d -m0755 /home/xxx/openwrt/bin/targets/ipq806x/generic/packages
/home/xxx/openwrt/staging_dir/host/bin/fakeroot /home/xxx/openwrt/scripts/ipkg-build -m "" /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools /home/xxx/openwrt/bin/targets/ipq806x/generic/packages
/home/xxx/openwrt/staging_dir/host/bin/find: '/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/etc/config/ubootenv': No such file or directory
/home/xxx/openwrt/staging_dir/host/bin/find: '/home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools/etc/fw_env.config': No such file or directory
Packaged contents of /home/xxx/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/u-boot-2020.04/ipkg-arm_cortex-a15_neon-vfpv4/uboot-envtools into /home/xxx/openwrt/bin/targets/ipq806x/generic/packages/uboot-envtools_2020.04-84_arm_cortex-a15_neon-vfpv4.ipk
echo "uboot-envtools" >> /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/pkginfo/uboot-envtools.default.install
make[3]: Leaving directory '/home/xxx/openwrt/package/boot/uboot-envtools'
time: package/boot/uboot-envtools/compile#4.98#1.04#4.45
make[2]: Leaving directory '/home/xxx/openwrt'
make[1]: *** [package/Makefile:108: /home/xxx/openwrt/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/xxx/openwrt'
make: *** [/home/xxx/openwrt/include/toplevel.mk:230: world] Błąd 2Nie mam pojęcia o co tu chodzi...
223 2021-02-20 11:43:40
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Dobra, buduję sobie obraz, dam znać czy coś pomogło.
224 2021-02-20 05:46:39
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
ambrozy5 napisał/a:
zainteresuj się tym wątkiem i zgloś chęć bycia beta testerem https://forum.openwrt.org/t/ipq806x-nss … 8500/82525
Czy taki obraz mogę sam zbudować czy muszę tam poprosić w wątku?
W tym momencie ten g10 jest dla mnie bezużyteczny skoro na openwrt giga nie potrafi przewalić....
225 2021-02-19 21:02:10
Odp: ASRock G10 - wsparcie (270 odpowiedzi, napisanych Sprzęt / Hardware)
Na szybko przywróciłem oryginalny soft i ponad 900 leci no i wifi 500 bez grosza ale na openwrt wifi może blokować słaby LAN.
Znalezione posty: 201 do 225 z 599
eko.one.pl → Posty przez palibrzuch
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc