FAQ o OpenWrt | Sprzedam różne routery | Oddam

2020-01-16 11:26:17

Królik napisał/a:

Bartekk napisał/a:
Hej, lap -> https://www.gnu.org/licenses/gpl-violation.html. Oni bardzo nie lubia jak sie nie przestrzega warunkow licencji
Niestety jako użytkownik końcowy nie mogę sam nic zrobić:
Prosimy zwrócić uwagę na to, że GPL, jak i inne licencje copyleft, są licencjami opartymi na przepisach o prawie autorskim. Oznacza to, że tylko posiadacze praw autorskich są upoważnieni do występowania przeciwko ich naruszeniom. FSF podejmuje działania w przypadku wszystkich pogwałceń GPL zgłoszonych w stosunku do kodu objętego prawami autorskimi FSF i oferuje pomoc każdemu innemu posiadaczowi praw autorskich, który życzy sobie tego samego.
Jednakże nie możemy działać na własną rękę jeśli nie mamy praw autorskich. A zatem, przed zgłoszeniem naruszenia licencji upewnijcie się, kim są posiadacze praw do danego oprogramowania.

Póki co postraszyłem ich, że zwrócę się z pomocą do twórców u-boota i kernela.

Tam też jest DSL. Fajnie by było dość do tego, że będzie działał. Bez źródeł pewnie nic się nie uda.

Nie ma co tracic czasu na straszenie, zglos sie na liscie mailingowej z U-Boota z tym zapytaniem - chlopaki na pewno beda mieli jakies rozwiazanie

2020-01-16 09:44:33

Hej, lap -> https://www.gnu.org/licenses/gpl-violation.html. Oni bardzo nie lubia jak sie nie przestrzega warunkow licencji

2020-01-05 12:00:55

pepe2k napisał/a:

Bartekk napisał/a:
Na wczesniejszych wydaniach openwrt (lub lede) gdy kazdy z portow ze switcha byl osobno wystawiony jako sysf bylem w stanie programowo nimi zarzadzac. Niestety od X wydan sie to zmienilo, psujac wczesniej dzialajaca funkcjonalnosc. Postaram sie namierzyc problem i wroce do tematu, gdy bedzie wiadomo jak to zrobic nie uzywajac pomyslu tasmowego
Jak używasz ath79 to rzeczywiście nie ma już wsparcia dla tego ale da się w DTS wyłączyć LEDy, te 4 rejestry odpowiadają za konfigurację sprzętowego "mrygania" LEDami: https://github.com/openwrt/openwrt/blob … 0.dts#L198
Dokumentacja tutaj: https://github.com/Deoptim/atheros/blob … AR8327.pdf (od strony 72).

Dziala, dzieki bardzo

2020-01-04 18:16:44

Na wczesniejszych wydaniach openwrt (lub lede) gdy kazdy z portow ze switcha byl osobno wystawiony jako sysf bylem w stanie programowo nimi zarzadzac. Niestety od X wydan sie to zmienilo, psujac wczesniej dzialajaca funkcjonalnosc. Postaram sie namierzyc problem i wroce do tematu, gdy bedzie wiadomo jak to zrobic nie uzywajac pomyslu tasmowego

2020-01-04 17:55:02

Niestety nie wylacza diod od switcha (tj. LAN + WAN).

2020-01-04 16:39:17

Czesc, walcze aby wylaczyc calkowicie wszystkie diody w WD N750, o ile udalo sie z ledami od frontu to tyle tylne od switcha nie chca wspolpracowac. Zrobilem odpowiednia konfiguracje w pliku /etc/config/system

config led
    option trigger 'none'
    option sysfs 'ath9k-phy0'
    option default '0'
    option name 'phy0'

config led
    option trigger 'none'
    option sysfs 'ath9k-phy1'
    option default '0'
    option name 'phy1'

i mimo tego ledy dalej migaja. Czy istnieje wiec sposob aby definitywnie je wylaczyc bez ingerencji sprzetowej?

Pozdrawiam Bartek!

2019-05-22 19:09:29

IceG napisał/a:

Bartekk napisał/a:
Wrzuć tam debiana i zapomnisz, że trzeba coś tam grzebać...
Miałem Debiana Bartekk.. uruchamiałem go z instrukcji (http://davidegironi.blogspot.com/2018/1 … N7RUNgwjDc) bo zależało mi na łatwym środowisku "do wyklikania", czyli OMV. A przy Debianie miałem a to brak sterowników do sieciówki.. to przyciski nie działały.. to znów wiatrak chodził ciągle na maksa.. to MAC wiadomo jaki.. i tak ciągle coś.. więc wgrałem OpenWrt. Jest trochę lepiej ale będę walczył o powrót OFW.

Ja swojego mam już z 5 lat? Nawet nie pamiętam, na początku też katowałem go na openwrt, ale jednak stwierdziłem, że to nie sprzęt na to i tak od dawien dawna siedzę na debianie. Osobiście brak problemów z przyciskami, wiatrakami, macami itd. Jeśli masz jeszcze coś siły to spróbuj wg. https://forum.doozan.com/read.php?2,12096, jak coś będzie nie tak to pisz to pomogę.

PS Cezary usuń proszę post jeśli będą jakieś konsekwencje z zamieszczenia w/w linku.

2019-05-22 19:05:41

To wina miboxa, u siebie mam to samo. Skopcili tego androida 8.0

2019-05-17 07:44:40

Wrzuć tam debiana i zapomnisz, że trzeba coś tam grzebać...

2019-05-04 11:25:20

Na mac address ja u siebie na debianie robię to tak:

/sbin/ip link set eth0 address `/usr/bin/fw_printenv ethaddr | /bin/grep -E -o '[[:xdigit:]]{2}(:[[:xdigit:]]{2}){5}'`

2019-04-18 19:24:11

O to dokładnie mi chodziło. Dzięki bardzo i dobrej nocy!

2019-04-18 19:15:07

Moduły do m.in dvb. One są zbudowane w m.in.

build_dir/target-mips_24kc_musl/linux-ar71xx_generic/linux-4.14.105/drivers/media/

ale fizycznie w obrazie systemu ich nie ma. Teoretycznie mógłbym je teraz skopiować do files/ ale jeśli zmieni się rewizja kernela to mogą nie załadować, dlatego szukam jakieś automatyzacji tego.

2019-04-18 18:45:21

Ok, to akurat jasne ale jak to zrobić w runtime tzn. w momencie kompilacji całego rootfsa + kernela aby moduły automatycznie wrzucić do obrazu?

2019-04-18 18:37:18

Cześć, czy w openwrt da się na wzór buildroota przygotować coś ala post-build-script, który przerzuciłby do obrazu wymagane przeze mnie np. skompilowane moduły kernela albo czy istnieje jakiś dedykowany do tego sposób?

2018-09-24 16:40:19

Cześć, posiadam w sieci spięte 2x n750 jak główny router + 2x wt3020 jako ap. Niestety co jakiś czas z jeden z nich przestaje być dostępny i jedyną opcją jest restart z wyciągnięciem wtyczki z lanu i podłączenie. Logi z pierwszego:

at Sep 22 10:00:48 2018 kern.notice kernel: [    0.000000] Linux version 4.14.70 (bartekk@bartekk) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6646-cb7ac151cd)) #0 Wed Sep 19 08:42:13 2018
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Board has DDR1
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Analog PMU set to hw control
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Digital PMU set to hw control
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7620N ver:2 eco:6
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] MIPS: machine is Nexx WT3020 (8M)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Zone ranges:
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Early memory node ranges
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8047d6b0, node_mem_map 81000040
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=0007fe70
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=0007fe70
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] Memory: 59864K/65536K available (3588K kernel code, 175K rwdata, 836K rodata, 192K init, 216K bss, 5672K reserved, 0K cma-reserved)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] NR_IRQS: 256
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] CPU Clock: 580MHz
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] systick: enable autosleep mode
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] systick: running - mult: 214748, shift: 32
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.015461] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.087707] pid_max: default: 32768 minimum: 301
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.097101] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.110119] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.128940] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.148416] futex hash table entries: 256 (order: -1, 3072 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.160585] pinctrl core: initialized pinctrl subsystem
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.171417] NET: Registered protocol family 16
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.205100] rt2880_gpio 10000600.gpio: registering 24 gpios
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.216131] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.228701] rt2880_gpio 10000660.gpio: registering 32 gpios
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.239693] rt2880_gpio 10000660.gpio: registering 32 irq handlers
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.252263] rt2880_gpio 10000688.gpio: registering 1 gpios
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.263078] rt2880_gpio 10000688.gpio: registering 1 irq handlers
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.279676] clocksource: Switched to clocksource systick
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.291309] NET: Registered protocol family 2
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.300736] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.314507] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.327098] TCP: Hash tables configured (established 1024 bind 1024)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.339879] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.351394] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.364081] NET: Registered protocol family 1
Sat Sep 22 10:00:48 2018 kern.debug kernel: [    0.372652] PCI: CLS 0 bytes, default 32
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.375281] rt-timer 10000100.timer: maximum frequency is 1220Hz
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    0.387946] Crashlog allocated RAM at address 0x3f00000
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.399940] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.418219] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.429709] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.458600] io scheduler noop registered
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.466300] io scheduler deadline registered (default)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.477265] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.490904] console [ttyS0] disabled
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.497895] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.517661] console [ttyS0] enabled
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.531438] bootconsole [early0] disabled
Sat Sep 22 10:00:48 2018 kern.err kernel: [    0.547902] cacheinfo: Failed to find cpu0 device node
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    0.558171] cacheinfo: Unable to detect cache hierarchy for CPU 0
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    0.574699] spi spi0.0: force spi mode3
Sat Sep 22 10:00:48 2018 kern.info kernel: [    0.583100] m25p80 spi0.0: en25q64 (8192 Kbytes)
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.592394] 4 fixed-partitions partitions found on MTD device spi0.0
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.605056] Creating 4 MTD partitions on "spi0.0":
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.614612] 0x000000000000-0x000000030000 : "u-boot"
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.625409] 0x000000030000-0x000000040000 : "u-boot-env"
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.636887] 0x000000040000-0x000000050000 : "factory"
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    0.647841] 0x000000050000-0x000000800000 : "firmware"
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    1.593149] 2 uimage-fw partitions found on MTD device firmware
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    1.604982] 0x000000050000-0x0000001c95b1 : "kernel"
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    1.615752] 0x0000001c95b1-0x000000800000 : "rootfs"
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    1.626475] mtd: device 5 (rootfs) set to be root filesystem
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    1.639269] 1 squashfs-split partitions found on MTD device rootfs
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    1.651651] 0x00000070c000-0x000000800000 : "rootfs_data"
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.664044] libphy: Fixed MDIO Bus: probed
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.680267] gsw: setting port4 to ephy mode
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.688638] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.707060] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.719542] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.736526] rt2880_wdt 10000120.watchdog: Initialized
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.747921] NET: Registered protocol family 10
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.760663] Segment Routing with IPv6
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.768068] NET: Registered protocol family 17
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.777051] 8021q: 802.1Q VLAN Support v1.8
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.800686] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Sat Sep 22 10:00:48 2018 kern.info kernel: [    1.815782] Freeing unused kernel memory: 192K
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    1.824664] This architecture does not have kernel memory protection.
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    2.649628] random: fast init done
Sat Sep 22 10:00:48 2018 user.info kernel: [    3.093527] init: Console is alive
Sat Sep 22 10:00:48 2018 user.info kernel: [    3.100606] init: - watchdog -
Sat Sep 22 10:00:48 2018 user.info kernel: [    5.258966] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.533526] usbcore: registered new interface driver usbfs
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.544618] usbcore: registered new interface driver hub
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.555351] usbcore: registered new device driver usb
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.571562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.586334] ehci-platform: EHCI generic platform driver
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.607120] phy phy-usbphy.0: remote usb device wakeup disabled
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.618925] phy phy-usbphy.0: UTMI 16bit 30MHz
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.627795] ehci-platform 101c0000.ehci: EHCI Host Controller
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.639280] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.655183] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.675246] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.688718] hub 1-0:1.0: USB hub found
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.696624] hub 1-0:1.0: 1 port detected
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.707842] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.721824] ohci-platform: OHCI generic platform driver
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.732581] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.746185] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.762060] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.800093] hub 2-0:1.0: USB hub found
Sat Sep 22 10:00:48 2018 kern.info kernel: [    5.808041] hub 2-0:1.0: 1 port detected
Sat Sep 22 10:00:48 2018 user.info kernel: [    5.819705] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sat Sep 22 10:00:48 2018 user.info kernel: [    5.838198] init: - preinit -
Sat Sep 22 10:00:48 2018 kern.info kernel: [    7.085702] usb 2-1: new full-speed USB device number 2 using ohci-platform
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    7.702806] random: procd: uninitialized urandom read (4 bytes read)
Sat Sep 22 10:00:48 2018 kern.info kernel: [    7.828832] 8021q: adding VLAN 0 to HW filter on device eth0
Sat Sep 22 10:00:48 2018 kern.notice kernel: [    9.295926] jffs2: notice: (373) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (2 unchecked, 3 orphan) and 10 of xref (3 dead, 0 orphan) found.
Sat Sep 22 10:00:48 2018 user.info kernel: [    9.330131] mount_root: switching to jffs2 overlay
Sat Sep 22 10:00:48 2018 kern.warn kernel: [    9.369862] overlayfs: upper fs does not support tmpfile.
Sat Sep 22 10:00:48 2018 user.warn kernel: [    9.391421] urandom-seed: Seeding with /etc/urandom.seed
Sat Sep 22 10:00:48 2018 user.info kernel: [    9.450764] procd: - early -
Sat Sep 22 10:00:48 2018 user.info kernel: [    9.457397] procd: - watchdog -
Sat Sep 22 10:00:48 2018 user.info kernel: [    9.890427] procd: - watchdog -
Sat Sep 22 10:00:48 2018 user.info kernel: [    9.897030] procd: - ubus -
Sat Sep 22 10:00:48 2018 kern.notice kernel: [   10.039708] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 22 10:00:48 2018 kern.notice kernel: [   10.052987] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 22 10:00:48 2018 kern.notice kernel: [   10.066248] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 22 10:00:48 2018 user.info kernel: [   10.080769] procd: - init -
Sat Sep 22 10:00:48 2018 user.info kernel: [   10.484270] kmodloader: loading kernel modules from /etc/modules.d/*
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.503703] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.527549] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.543571] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.562470] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.582542] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.646841] usbcore: registered new interface driver usbserial
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.658625] usbcore: registered new interface driver usbserial_generic
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.671765] usbserial: USB Serial support registered for generic
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.705805] xt_time: kernel timezone is -0000
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.838897] usbcore: registered new interface driver ch341
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.850010] usbserial: USB Serial support registered for ch341-uart
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.862592] ch341 2-1:1.0: ch341-uart converter detected
Sat Sep 22 10:00:48 2018 kern.info kernel: [   10.895170] usb 2-1: ch341-uart converter now attached to ttyUSB0
Sat Sep 22 10:00:48 2018 kern.info kernel: [   11.002954] PPP generic driver version 2.4.2
Sat Sep 22 10:00:48 2018 kern.info kernel: [   11.014308] NET: Registered protocol family 24
Sat Sep 22 10:00:48 2018 kern.info kernel: [   11.055671] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
Sat Sep 22 10:00:48 2018 kern.info kernel: [   11.070147] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
Sat Sep 22 10:00:48 2018 kern.info kernel: [   11.085598] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Sat Sep 22 10:00:48 2018 kern.debug kernel: [   11.100006] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Sep 22 10:00:48 2018 user.info kernel: [   11.137206] kmodloader: done loading kernel modules from /etc/modules.d/*
Sat Sep 22 10:00:48 2018 kern.warn kernel: [   12.587048] urandom_read: 4 callbacks suppressed
Sat Sep 22 10:00:48 2018 kern.notice kernel: [   12.587058] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 22 10:00:48 2018 kern.notice kernel: [   12.698269] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: 8021ad
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: 8021q
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: macvlan
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: veth
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: bridge
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: Network device
Sat Sep 22 10:00:48 2018 user.notice : Added device handler type: tunnel
Sat Sep 22 10:00:48 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Sat Sep 22 10:00:48 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Sat Sep 22 10:00:49 2018 cron.info crond[742]: crond (busybox 1.29.3) started, log level 5
Sat Sep 22 10:00:51 2018 authpriv.info dropbear[774]: Not backgrounding
Sat Sep 22 10:00:53 2018 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Sat Sep 22 10:00:53 2018 kern.info kernel: [   19.077247] 8021q: adding VLAN 0 to HW filter on device eth0
Sat Sep 22 10:00:53 2018 kern.info kernel: [   19.126593] device eth0 entered promiscuous mode
Sat Sep 22 10:00:53 2018 kern.info kernel: [   19.161272] br-lan: port 1(eth0.1) entered blocking state
Sat Sep 22 10:00:53 2018 kern.info kernel: [   19.172098] br-lan: port 1(eth0.1) entered disabled state
Sat Sep 22 10:00:53 2018 kern.info kernel: [   19.183230] device eth0.1 entered promiscuous mode
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.300110] br-lan: port 1(eth0.1) entered blocking state
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.310906] br-lan: port 1(eth0.1) entered forwarding state
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'lan' is enabled
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.645095] br-lan: port 2(eth0.2) entered blocking state
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.656088] br-lan: port 2(eth0.2) entered disabled state
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.667225] device eth0.2 entered promiscuous mode
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.676957] br-lan: port 2(eth0.2) entered blocking state
Sat Sep 22 10:00:54 2018 kern.info kernel: [   19.687743] br-lan: port 2(eth0.2) entered forwarding state
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'loopback' is enabled
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'loopback' is now up
Sat Sep 22 10:00:54 2018 daemon.notice netifd: bridge 'br-lan' link is up
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'lan' is setting up now
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Network device 'eth0' link is up
Sat Sep 22 10:00:54 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Sep 22 10:00:54 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Network device 'lo' link is up
Sat Sep 22 10:00:54 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Sep 22 10:00:55 2018 daemon.notice netifd: lan (882): udhcpc: started, v1.29.3
Sat Sep 22 10:00:55 2018 daemon.notice netifd: lan (882): udhcpc: sending discover
Sat Sep 22 10:00:55 2018 daemon.notice netifd: lan (882): udhcpc: sending select for 192.168.10.50
Sat Sep 22 10:00:55 2018 daemon.notice netifd: lan (882): udhcpc: lease of 192.168.10.50 obtained, lease time 43200
Sat Sep 22 10:00:55 2018 daemon.notice netifd: Interface 'lan' is now up
Sat Sep 22 10:00:57 2018 daemon.info procd: - init complete -
Sun Sep 23 06:56:07 2018 cron.err crond[742]: time disparity of 1255 minutes detected
Sun Sep 23 06:57:41 2018 kern.notice kernel: [   57.250300] random: crng init done
Sun Sep 23 06:58:57 2018 authpriv.info dropbear[991]: Child connection from 192.168.10.228:54547
Sun Sep 23 06:59:00 2018 authpriv.notice dropbear[991]: Auth succeeded with blank password for 'root' from 192.168.10.228:54547
Sun Sep 23 06:59:41 2018 authpriv.info dropbear[991]: Exit (root): Exited normally
Sun Sep 23 06:59:42 2018 authpriv.info dropbear[1003]: Child connection from 192.168.10.228:46497
Sun Sep 23 06:59:45 2018 authpriv.notice dropbear[1003]: Auth succeeded with blank password for 'root' from 192.168.10.228:46497
Sun Sep 23 07:00:00 2018 cron.info crond[742]: USER root pid 1015 cmd /usr/bin/measure.sh
Sun Sep 23 07:00:15 2018 authpriv.info dropbear[1003]: Exit (root): Exited normally
Sun Sep 23 07:30:00 2018 cron.info crond[742]: USER root pid 1024 cmd /usr/bin/measure.sh
Sun Sep 23 08:00:00 2018 cron.info crond[742]: USER root pid 1031 cmd /usr/bin/measure.sh
Sun Sep 23 08:11:32 2018 authpriv.info dropbear[1036]: Child connection from 192.168.10.161:42488
Sun Sep 23 08:11:33 2018 authpriv.notice dropbear[1036]: Auth succeeded with blank password for 'root' from 192.168.10.161:42488
Sun Sep 23 08:30:00 2018 cron.info crond[742]: USER root pid 1065 cmd /usr/bin/measure.sh
Sun Sep 23 09:00:00 2018 cron.info crond[742]: USER root pid 1077 cmd /usr/bin/measure.sh
Sun Sep 23 09:01:06 2018 kern.warn kernel: [ 2540.588632] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:01:06 2018 kern.warn kernel: [ 2540.609210] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:01:06 2018 kern.warn kernel: [ 2540.692350] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:01:07 2018 kern.warn kernel: [ 2540.980527] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:03:52 2018 kern.warn kernel: [ 2596.232602] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:03:52 2018 kern.warn kernel: [ 2596.253175] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:03:53 2018 kern.warn kernel: [ 2596.373406] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:03:53 2018 kern.warn kernel: [ 2596.454282] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:06:23 2018 kern.warn kernel: [ 2646.541420] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:06:23 2018 kern.warn kernel: [ 2646.562005] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:06:23 2018 kern.warn kernel: [ 2646.655311] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Sun Sep 23 09:06:23 2018 kern.warn kernel: [ 2646.879801] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)

network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd93:23ae:529c::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.ifname='eth0.1 eth0.2'
network.lan.proto='dhcp'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='20:28:18:a1:bf:d6'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='4 6t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0 6t'

br-lan    Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D6  
          inet addr:192.168.10.50  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::2228:18ff:fea1:bfd6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19569 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4145 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3462914 (3.3 MiB)  TX bytes:597387 (583.3 KiB)

eth0      Link encap:Ethernet  HWaddr 20:28:18:A1:34:B2  
          inet6 addr: fe80::2228:18ff:fea1:34b2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19687 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21238 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3825533 (3.6 MiB)  TX bytes:4218528 (4.0 MiB)
          Interrupt:5 

eth0.1    Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D6  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19686 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4145 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3471121 (3.3 MiB)  TX bytes:597387 (583.3 KiB)

eth0.2    Link encap:Ethernet  HWaddr 20:28:18:A1:34:B2  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:17064 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:3516938 (3.3 MiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:52 errors:0 dropped:0 overruns:0 frame:0
          TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:26946 (26.3 KiB)  TX bytes:26946 (26.3 KiB)

Drugi

Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Board has DDR1
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Analog PMU set to hw control
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Digital PMU set to hw control
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7620N ver:2 eco:6
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] MIPS: machine is Nexx WT3020 (8M)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Zone ranges:
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Early memory node ranges
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8047d6b0, node_mem_map 81000040
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=0003ba30
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=0003ba30
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] Memory: 59864K/65536K available (3588K kernel code, 175K rwdata, 836K rodata, 192K init, 216K bss, 5672K reserved, 0K cma-reserved)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] NR_IRQS: 256
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] CPU Clock: 580MHz
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] systick: enable autosleep mode
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] systick: running - mult: 214748, shift: 32
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.015461] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.087710] pid_max: default: 32768 minimum: 301
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.097104] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.110122] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.128943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.148417] futex hash table entries: 256 (order: -1, 3072 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.160587] pinctrl core: initialized pinctrl subsystem
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.171420] NET: Registered protocol family 16
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.205102] rt2880_gpio 10000600.gpio: registering 24 gpios
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.216132] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.228702] rt2880_gpio 10000660.gpio: registering 32 gpios
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.239694] rt2880_gpio 10000660.gpio: registering 32 irq handlers
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.252264] rt2880_gpio 10000688.gpio: registering 1 gpios
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.263079] rt2880_gpio 10000688.gpio: registering 1 irq handlers
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.279677] clocksource: Switched to clocksource systick
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.291310] NET: Registered protocol family 2
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.300737] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.314508] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.327099] TCP: Hash tables configured (established 1024 bind 1024)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.339881] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.351396] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.364083] NET: Registered protocol family 1
Sun Sep 23 17:43:23 2018 kern.debug kernel: [    0.372654] PCI: CLS 0 bytes, default 32
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.375284] rt-timer 10000100.timer: maximum frequency is 1220Hz
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    0.387949] Crashlog allocated RAM at address 0x3f00000
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.399944] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.418223] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.429714] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.458606] io scheduler noop registered
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.466307] io scheduler deadline registered (default)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.477272] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.490910] console [ttyS0] disabled
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.497901] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.517668] console [ttyS0] enabled
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.531444] bootconsole [early0] disabled
Sun Sep 23 17:43:23 2018 kern.err kernel: [    0.547908] cacheinfo: Failed to find cpu0 device node
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    0.558177] cacheinfo: Unable to detect cache hierarchy for CPU 0
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    0.574707] spi spi0.0: force spi mode3
Sun Sep 23 17:43:23 2018 kern.info kernel: [    0.583108] m25p80 spi0.0: en25q64 (8192 Kbytes)
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.592402] 4 fixed-partitions partitions found on MTD device spi0.0
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.605066] Creating 4 MTD partitions on "spi0.0":
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.614620] 0x000000000000-0x000000030000 : "u-boot"
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.625417] 0x000000030000-0x000000040000 : "u-boot-env"
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.636895] 0x000000040000-0x000000050000 : "factory"
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    0.647850] 0x000000050000-0x000000800000 : "firmware"
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    1.592864] 2 uimage-fw partitions found on MTD device firmware
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    1.604699] 0x000000050000-0x0000001c95b1 : "kernel"
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    1.615469] 0x0000001c95b1-0x000000800000 : "rootfs"
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    1.626191] mtd: device 5 (rootfs) set to be root filesystem
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    1.638985] 1 squashfs-split partitions found on MTD device rootfs
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    1.651367] 0x00000070c000-0x000000800000 : "rootfs_data"
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.663762] libphy: Fixed MDIO Bus: probed
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.679967] gsw: setting port4 to ephy mode
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.688338] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link up (100Mbps/Full duplex)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.706533] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.724953] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.737435] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.754422] rt2880_wdt 10000120.watchdog: Initialized
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.765815] NET: Registered protocol family 10
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.778465] Segment Routing with IPv6
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.785942] NET: Registered protocol family 17
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.794872] 8021q: 802.1Q VLAN Support v1.8
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.818416] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Sun Sep 23 17:43:23 2018 kern.info kernel: [    1.833546] Freeing unused kernel memory: 192K
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    1.842427] This architecture does not have kernel memory protection.
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    2.679640] random: fast init done
Sun Sep 23 17:43:23 2018 user.info kernel: [    3.111448] init: Console is alive
Sun Sep 23 17:43:23 2018 user.info kernel: [    3.118425] init: - watchdog -
Sun Sep 23 17:43:23 2018 user.info kernel: [    5.277097] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.551562] usbcore: registered new interface driver usbfs
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.562655] usbcore: registered new interface driver hub
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.573389] usbcore: registered new device driver usb
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.589520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.604309] ehci-platform: EHCI generic platform driver
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.625094] phy phy-usbphy.0: remote usb device wakeup disabled
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.636900] phy phy-usbphy.0: UTMI 16bit 30MHz
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.645770] ehci-platform 101c0000.ehci: EHCI Host Controller
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.657255] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.673157] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.693898] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.707371] hub 1-0:1.0: USB hub found
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.715279] hub 1-0:1.0: 1 port detected
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.726496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.740481] ohci-platform: OHCI generic platform driver
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.751240] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.764844] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.780720] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.818751] hub 2-0:1.0: USB hub found
Sun Sep 23 17:43:23 2018 kern.info kernel: [    5.826698] hub 2-0:1.0: 1 port detected
Sun Sep 23 17:43:23 2018 user.info kernel: [    5.838344] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Sep 23 17:43:23 2018 user.info kernel: [    5.856831] init: - preinit -
Sun Sep 23 17:43:23 2018 kern.info kernel: [    7.736950] 8021q: adding VLAN 0 to HW filter on device eth0
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    7.890292] random: procd: uninitialized urandom read (4 bytes read)
Sun Sep 23 17:43:23 2018 kern.info kernel: [    8.187876] IPv6: eth0: IPv6 duplicate address fe80::2228:18ff:fea1:bfd6 detected!
Sun Sep 23 17:43:23 2018 kern.notice kernel: [    9.298952] jffs2: notice: (367) jffs2_build_xattr_subsystem: complete building xattr subsystem, 10 of xdatum (2 unchecked, 8 orphan) and 17 of xref (8 dead, 0 orphan) found.
Sun Sep 23 17:43:23 2018 user.info kernel: [    9.333055] mount_root: switching to jffs2 overlay
Sun Sep 23 17:43:23 2018 kern.warn kernel: [    9.372895] overlayfs: upper fs does not support tmpfile.
Sun Sep 23 17:43:23 2018 user.warn kernel: [    9.395465] urandom-seed: Seeding with /etc/urandom.seed
Sun Sep 23 17:43:23 2018 user.info kernel: [    9.456237] procd: - early -
Sun Sep 23 17:43:23 2018 user.info kernel: [    9.462070] procd: - watchdog -
Sun Sep 23 17:43:23 2018 user.info kernel: [    9.856740] procd: - watchdog -
Sun Sep 23 17:43:23 2018 user.info kernel: [    9.863347] procd: - ubus -
Sun Sep 23 17:43:23 2018 kern.notice kernel: [   10.006084] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Sep 23 17:43:23 2018 kern.notice kernel: [   10.019334] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Sep 23 17:43:23 2018 kern.notice kernel: [   10.032588] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Sep 23 17:43:23 2018 user.info kernel: [   10.047016] procd: - init -
Sun Sep 23 17:43:23 2018 user.info kernel: [   10.368801] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.391009] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.416736] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.432758] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.453242] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.473381] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.538569] usbcore: registered new interface driver usbserial
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.550385] usbcore: registered new interface driver usbserial_generic
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.563522] usbserial: USB Serial support registered for generic
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.596716] xt_time: kernel timezone is -0000
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.729619] usbcore: registered new interface driver ch341
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.740735] usbserial: USB Serial support registered for ch341-uart
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.805808] PPP generic driver version 2.4.2
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.817183] NET: Registered protocol family 24
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.858622] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.873099] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
Sun Sep 23 17:43:23 2018 kern.info kernel: [   10.888548] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Sun Sep 23 17:43:23 2018 kern.debug kernel: [   10.902920] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sun Sep 23 17:43:23 2018 user.info kernel: [   11.009971] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Sep 23 17:43:23 2018 kern.warn kernel: [   12.465262] urandom_read: 4 callbacks suppressed
Sun Sep 23 17:43:23 2018 kern.notice kernel: [   12.465271] random: jshn: uninitialized urandom read (4 bytes read)
Sun Sep 23 17:43:23 2018 kern.notice kernel: [   12.576547] random: ubusd: uninitialized urandom read (4 bytes read)
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: 8021ad
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: 8021q
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: macvlan
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: veth
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: bridge
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: Network device
Sun Sep 23 17:43:23 2018 user.notice : Added device handler type: tunnel
Sun Sep 23 17:43:24 2018 cron.info crond[723]: crond (busybox 1.29.3) started, log level 5
Sun Sep 23 17:43:26 2018 authpriv.info dropbear[755]: Not backgrounding
Sun Sep 23 17:43:28 2018 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Sun Sep 23 17:43:28 2018 kern.info kernel: [   18.957325] 8021q: adding VLAN 0 to HW filter on device eth0
Sun Sep 23 17:43:28 2018 kern.info kernel: [   19.007635] device eth0 entered promiscuous mode
Sun Sep 23 17:43:28 2018 kern.info kernel: [   19.048981] br-lan: port 1(eth0.1) entered blocking state
Sun Sep 23 17:43:28 2018 kern.info kernel: [   19.059928] br-lan: port 1(eth0.1) entered disabled state
Sun Sep 23 17:43:28 2018 kern.info kernel: [   19.071069] device eth0.1 entered promiscuous mode
Sun Sep 23 17:43:28 2018 kern.info kernel: [   19.172108] br-lan: port 1(eth0.1) entered blocking state
Sun Sep 23 17:43:28 2018 kern.info kernel: [   19.182905] br-lan: port 1(eth0.1) entered forwarding state
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'lan' is enabled
Sun Sep 23 17:43:29 2018 kern.info kernel: [   19.520684] br-lan: port 2(eth0.2) entered blocking state
Sun Sep 23 17:43:29 2018 kern.info kernel: [   19.531516] br-lan: port 2(eth0.2) entered disabled state
Sun Sep 23 17:43:29 2018 kern.info kernel: [   19.542652] device eth0.2 entered promiscuous mode
Sun Sep 23 17:43:29 2018 kern.info kernel: [   19.552381] br-lan: port 2(eth0.2) entered blocking state
Sun Sep 23 17:43:29 2018 kern.info kernel: [   19.563165] br-lan: port 2(eth0.2) entered forwarding state
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'loopback' is enabled
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'loopback' is now up
Sun Sep 23 17:43:29 2018 daemon.notice netifd: bridge 'br-lan' link is up
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'lan' is setting up now
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Network device 'eth0' link is up
Sun Sep 23 17:43:29 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Sun Sep 23 17:43:29 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Network device 'lo' link is up
Sun Sep 23 17:43:29 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Sun Sep 23 17:43:30 2018 daemon.notice netifd: lan (868): udhcpc: started, v1.29.3
Sun Sep 23 17:43:30 2018 daemon.notice netifd: lan (868): udhcpc: sending discover
Sun Sep 23 17:43:30 2018 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sun Sep 23 17:43:30 2018 daemon.notice netifd: radio0 (837): command failed: Not supported (-122)
Sun Sep 23 17:43:30 2018 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Sun Sep 23 17:43:32 2018 daemon.info procd: - init complete -
Sun Sep 23 17:43:33 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Sep 23 17:43:34 2018 daemon.notice netifd: lan (868): udhcpc: sending discover
Sun Sep 23 17:43:34 2018 daemon.notice netifd: lan (868): udhcpc: sending select for 192.168.10.229
Sun Sep 23 17:43:34 2018 kern.info kernel: [   24.892045] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Sep 23 17:43:34 2018 daemon.notice netifd: lan (868): udhcpc: lease of 192.168.10.229 obtained, lease time 43200
Sun Sep 23 17:43:34 2018 kern.info kernel: [   24.936277] br-lan: port 3(wlan0) entered blocking state
Sun Sep 23 17:43:34 2018 kern.info kernel: [   24.946937] br-lan: port 3(wlan0) entered disabled state
Sun Sep 23 17:43:34 2018 kern.info kernel: [   24.957883] device wlan0 entered promiscuous mode
Sun Sep 23 17:43:34 2018 daemon.err hostapd: Using interface wlan0 with hwaddr 20:28:18:a1:bf:d6 and ssid "WD-N750"
Sun Sep 23 17:43:35 2018 daemon.notice netifd: Interface 'lan' is now up
Sun Sep 23 17:43:36 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sun Sep 23 17:43:36 2018 daemon.notice hostapd: wlan0: AP-ENABLED
Sun Sep 23 17:43:36 2018 kern.info kernel: [   26.363538] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Sep 23 17:43:36 2018 kern.info kernel: [   26.376525] br-lan: port 3(wlan0) entered blocking state
Sun Sep 23 17:43:36 2018 kern.info kernel: [   26.387163] br-lan: port 3(wlan0) entered forwarding state
Sun Sep 23 17:43:36 2018 daemon.notice netifd: Network device 'wlan0' link is up
Sun Sep 23 17:43:36 2018 daemon.notice netifd: lan (868): udhcpc: performing DHCP renew
Sun Sep 23 17:43:36 2018 daemon.notice netifd: lan (868): udhcpc: sending renew to 0.0.0.0
Sun Sep 23 17:43:36 2018 daemon.notice netifd: lan (868): udhcpc: lease of 192.168.10.229 obtained, lease time 43200
Mon Sep 24 14:58:36 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 IEEE 802.11: authenticated
Mon Sep 24 14:58:36 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 IEEE 802.11: associated (aid 1)
Mon Sep 24 14:58:36 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 10:2a:b3:7b:2e:18
Mon Sep 24 14:58:36 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 WPA: pairwise key handshake completed (RSN)
Mon Sep 24 14:58:56 2018 cron.err crond[723]: time disparity of 1275 minutes detected
Mon Sep 24 14:59:39 2018 kern.notice kernel: [   50.258407] random: crng init done
Mon Sep 24 14:59:51 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 IEEE 802.11: authenticated
Mon Sep 24 14:59:51 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 IEEE 802.11: associated (aid 2)
Mon Sep 24 14:59:51 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 74:2f:68:9d:4d:a4
Mon Sep 24 14:59:51 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 WPA: pairwise key handshake completed (RSN)
Mon Sep 24 15:00:24 2018 daemon.info hostapd: wlan0: STA 20:47:da:94:67:b4 IEEE 802.11: authenticated
Mon Sep 24 15:00:24 2018 daemon.info hostapd: wlan0: STA 20:47:da:94:67:b4 IEEE 802.11: associated (aid 3)
Mon Sep 24 15:00:24 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 20:47:da:94:67:b4
Mon Sep 24 15:00:24 2018 daemon.info hostapd: wlan0: STA 20:47:da:94:67:b4 WPA: pairwise key handshake completed (RSN)
Mon Sep 24 15:03:07 2018 kern.warn kernel: [  120.949388] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:07 2018 kern.warn kernel: [  121.012444] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:07 2018 kern.warn kernel: [  121.033073] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:08 2018 kern.warn kernel: [  121.276198] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:13 2018 kern.info kernel: [  122.940853] mtk_soc_eth 10100000.ethernet eth0: port 4 link down
Mon Sep 24 15:03:15 2018 kern.info kernel: [  123.823618] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (100Mbps/Full duplex)
Mon Sep 24 15:03:16 2018 kern.warn kernel: [  123.867212] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:16 2018 kern.warn kernel: [  123.930735] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:16 2018 kern.warn kernel: [  123.951403] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:03:16 2018 kern.warn kernel: [  124.050547] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:04:09 2018 kern.warn kernel: [  141.941019] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:04:24 2018 kern.warn kernel: [  147.096563] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:04:49 2018 kern.warn kernel: [  155.500300] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)
Mon Sep 24 15:04:57 2018 kern.warn kernel: [  158.116581] br-lan: received packet on eth0.1 with own address as source address (addr:20:28:18:a1:bf:d6, vlan:0)

network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd93:23ae:529c::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.ifname='eth0.1 eth0.2'
network.lan.proto='dhcp'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='20:28:18:a1:bf:d7'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='4 6t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0 6t'

br-lan    Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D7  
          inet addr:192.168.10.229  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::2228:18ff:fea1:bfd7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1157 errors:0 dropped:0 overruns:0 frame:0
          TX packets:947 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:96196 (93.9 KiB)  TX bytes:139321 (136.0 KiB)

eth0      Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D6  
          inet6 addr: fe80::2228:18ff:fea1:bfd6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:266619 errors:0 dropped:0 overruns:0 frame:0
          TX packets:129977 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:373358848 (356.0 MiB)  TX bytes:10902434 (10.3 MiB)
          Interrupt:5 

eth0.1    Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D7  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:266245 errors:0 dropped:0 overruns:0 frame:0
          TX packets:129241 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:368527270 (351.4 MiB)  TX bytes:10309649 (9.8 MiB)

eth0.2    Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D6  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:327 errors:0 dropped:0 overruns:0 frame:0
          TX packets:723 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:23287 (22.7 KiB)  TX bytes:65970 (64.4 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:656 (656.0 B)  TX bytes:656 (656.0 B)

wlan0     Link encap:Ethernet  HWaddr 20:28:18:A1:BF:D6  
          inet6 addr: fe80::2228:18ff:fea1:bfd6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:129498 errors:0 dropped:0 overruns:0 frame:0
          TX packets:266430 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:10337310 (9.8 MiB)  TX bytes:377683496 (360.1 MiB)

Nie wiem czy czasami nie ma to związku z mac addressami, po zmianie wanu na lan.

Pozdrawiam, Bartek!

2018-07-05 17:37:17

Najszybciej byłoby napisać apke korzystając z blueza i jego API dbus'owego.

2018-06-06 18:20:11

http://www.edimax.pl/edimax/merchandise … s/eu-4208/

Używamy tego w biurze u nas w ilosciach hurtowych i działa bez problemu. Wsparcie w kernelu od dawien dawna, cena przystępna i nie ma do czego się w sumie przyczepić.

2018-05-30 20:06:59

Przyczyna była błędna konfiguracja SQM - źle wybrany interfejs.

2018-05-28 17:35:59

Cześć, zmieniłem providera od internetu i odkurzyłem NSA310. Puściłem kilka obrazów linuxowych po transmission i okazuje się, że mam ok. 10% nominalnej prędkości łącza. Link spiął się na 1gb/s i zbytnio nie wiem co jest nie tak. Na innych urządzeniach tak samo, po wifi idzie pełną prędkością. Macie jakieś pomysły?

2018-03-18 19:22:08

To tak stabilnie na tym dachu działa, że zapomniałem, że coś tam jest w ogóle.

2018-03-18 19:04:25

Ja u siebie mam banana pro, kupiłem żeby zobaczyć z czym to się je i dla mnie dramat. SDK nie było, o supporcie od producenta można pomarzyć. Aż dziwne, że firmy robią na tym komercyjne projekty.

2018-03-18 19:01:43

Problem namierzony, nie dawało mi to spokoju i mimo, że po ustawieniu ręcznych adresów wszystko chodziło to przeanalizowałem jeszcze raz logi i tknęło mnie coś przy

user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override

Przypomniałem sobie, że na dachu mam podłączonego wt3020, który jest kombajnem dla mojej stacji pogodowej. Po odłączeniu go od głównego routera tj. n750 server dhcp w końcu zaczął przydzielać poprawne adresy.

2018-03-12 21:38:14

Nie zmieniałem nic na klientach. Od czasu aktualizacji I zmianie adresu klienci nie otrzymują poprawnych adresów. Gdy zmienię na defaultowy to wszystko wraca do normy. Gdyby taki objaw był tylko na omawianym telefonie to szukał bym na nim przyczyny, ale nie nieprawidłowa adresacja dotyczy wszystkiego, od laptopów po telewizory.

2018-03-12 21:25:17

Wszędzie w klientach jest wymuszone dhcp, nic w tej kwestii nie było zmieniane. Spróbuje najwyżej skompilować latesta i na nim sprawdzić. Dzięki za pomoc.

2018-03-12 21:18:39

root@LEDE:~# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:90:A9:0B:A5:0B  
          inet addr:192.168.2.1  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::290:a9ff:fe0b:a50b/64 Scope:Link
          inet6 addr: fd42:91a4:9528::1/60 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6108 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5992 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:549504 (536.6 KiB)  TX bytes:4711439 (4.4 MiB)

eth0      Link encap:Ethernet  HWaddr 00:90:A9:0B:A5:0B  
          inet6 addr: fe80::290:a9ff:fe0b:a50b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:714 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2503 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:61534 (60.0 KiB)  TX bytes:202411 (197.6 KiB)
          Interrupt:4 

eth0.1    Link encap:Ethernet  HWaddr 00:90:A9:0B:A5:0B  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:714 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2474 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:48682 (47.5 KiB)  TX bytes:189061 (184.6 KiB)

eth0.2    Link encap:Ethernet  HWaddr 00:90:A9:0B:A5:0A  
          inet6 addr: fe80::290:a9ff:fe0b:a50a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:2322 (2.2 KiB)

eth1      Link encap:Ethernet  HWaddr 0C:5B:8F:27:9A:64  
          inet addr:192.168.8.100  Bcast:192.168.8.255  Mask:255.255.255.0
          inet6 addr: fe80::e5b:8fff:fe27:9a64/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4208 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2952 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3960777 (3.7 MiB)  TX bytes:330978 (323.2 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:650 errors:0 dropped:0 overruns:0 frame:0
          TX packets:650 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:42920 (41.9 KiB)  TX bytes:42920 (41.9 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:90:A9:0B:A5:0B  
          inet6 addr: fe80::290:a9ff:fe0b:a50b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7591 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7299 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:742928 (725.5 KiB)  TX bytes:5012465 (4.7 MiB)

wlan1     Link encap:Ethernet  HWaddr 00:90:A9:0B:A5:0D  
          inet6 addr: fe80::290:a9ff:fe0b:a50d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:941 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:92200 (90.0 KiB)

root@LEDE:~#

root@LEDE:~# cat /var/etc/dnsmasq*
# auto-generated config file from /etc/config/dhcp
conf-file=/etc/dnsmasq.conf
dhcp-authoritative
domain-needed
localise-queries
read-ethers
bogus-priv
expand-hosts
local-service
domain=lan
server=/lan/
dhcp-leasefile=/tmp/dhcp.leases
resolv-file=/tmp/resolv.conf.auto
stop-dns-rebind
rebind-localhost-ok
rebind-domain-ok=free.aero2.net.pl
dhcp-broadcast=tag:needs-broadcast
addn-hosts=/tmp/hosts
conf-dir=/tmp/dnsmasq.d
user=dnsmasq
group=dnsmasq




dhcp-range=lan,192.168.2.100,192.168.2.249,255.255.255.0,12h
no-dhcp-interface=eth1

Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.000000] Linux version 4.4.112 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3785-ceea0ac) ) #0 Fri Jan 26 07:37:28 2018
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=00000000
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] SoC: Atheros AR9344 rev 2
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Mar  8 18:25:32 2018 kern.warn kernel: [    0.000000] No valid device tree found, continuing without
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Zone ranges:
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Early memory node ranges
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804384d0, node_mem_map 81000000
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Thu Mar  8 18:25:32 2018 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Mar  8 18:25:32 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.000000] Kernel command line:  board=MYNET-N750 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Memory: 124944K/131072K available (3122K kernel code, 162K rwdata, 780K rodata, 280K init, 205K bss, 6128K reserved, 0K cma-reserved)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] Clocks: CPU:560.000MHz, DDR:480.000MHz, AHB:240.000MHz, Ref:40.000MHz
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.008296] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.081137] pid_max: default: 32768 minimum: 301
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.086175] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.093230] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.103141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.113661] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.121320] NET: Registered protocol family 16
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.127482] MIPS: machine is WD My Net N750
Thu Mar  8 18:25:32 2018 kern.warn kernel: [    0.159297] registering PCI controller with io_map_base unset
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.409374] PCI host bridge to bus 0000:00
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.413744] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.421102] pci_bus 0000:00: root bus resource [io  0x0000]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.427033] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.434267] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.442736] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
Thu Mar  8 18:25:32 2018 kern.err kernel: [    0.442767] pci 0000:00:00.0: invalid calibration data
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.448275] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.448334] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.448402] pci 0000:00:00.0: supports D1
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.448419] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.448644] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.448679] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.456475] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.464194] pci 0000:00:00.0: using irq 40 for pin 1
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.470326] clocksource: Switched to clocksource MIPS
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.477025] NET: Registered protocol family 2
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.482563] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.489986] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.496797] TCP: Hash tables configured (established 1024 bind 1024)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.503646] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.509872] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.516845] NET: Registered protocol family 1
Thu Mar  8 18:25:32 2018 kern.debug kernel: [    0.521602] PCI: CLS 0 bytes, default 32
Thu Mar  8 18:25:32 2018 kern.warn kernel: [    0.526123] Crashlog allocated RAM at address 0x3f00000
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.546121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.552389] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.565301] io scheduler noop registered
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.569484] io scheduler deadline registered (default)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.575264] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.584757] console [ttyS0] disabled
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.608628] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.617817] console [ttyS0] enabled
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.625239] bootconsole [early0] disabled
Thu Mar  8 18:25:32 2018 kern.warn kernel: [    0.638529] m25p80 spi0.0: found mx25l12805d, expected m25p80
Thu Mar  8 18:25:32 2018 kern.info kernel: [    0.644442] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.649595] 6 cmdlinepart partitions found on MTD device spi0.0
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.655615] Creating 6 MTD partitions on "spi0.0":
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.660499] 0x000000000000-0x000000040000 : "u-boot"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.667579] 0x000000040000-0x000000050000 : "u-boot-env"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.674559] 0x000000050000-0x000000060000 : "devdata"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.681278] 0x000000060000-0x000000070000 : "devconf"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.687944] 0x000000070000-0x000000ff0000 : "firmware"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.719301] 2 seama-fw partitions found on MTD device firmware
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.725256] 0x000000070040-0x0000001c0000 : "kernel"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.731672] 0x0000001c0000-0x000000ff0000 : "rootfs"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.738258] mtd: device 6 (rootfs) set to be root filesystem
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.744077] 1 squashfs-split partitions found on MTD device rootfs
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.750370] 0x000000660000-0x000000ff0000 : "rootfs_data"
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    0.757438] 0x000000ff0000-0x000001000000 : "radiocfg"
Thu Mar  8 18:25:32 2018 kern.info kernel: [    1.771727] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
Thu Mar  8 18:25:32 2018 kern.info kernel: [    2.382027] libphy: ag71xx_mdio: probed
Thu Mar  8 18:25:32 2018 kern.info kernel: [    3.968906] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
Thu Mar  8 18:25:32 2018 kern.info kernel: [    3.980394] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Mar  8 18:25:32 2018 kern.info kernel: [    3.988805] NET: Registered protocol family 10
Thu Mar  8 18:25:32 2018 kern.info kernel: [    3.997009] NET: Registered protocol family 17
Thu Mar  8 18:25:32 2018 kern.info kernel: [    4.001655] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Mar  8 18:25:32 2018 kern.info kernel: [    4.014608] 8021q: 802.1Q VLAN Support v1.8
Thu Mar  8 18:25:32 2018 kern.info kernel: [    4.020626] hctosys: unable to open rtc device (rtc0)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    4.030505] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
Thu Mar  8 18:25:32 2018 kern.info kernel: [    4.038869] Freeing unused kernel memory: 280K
Thu Mar  8 18:25:32 2018 user.info kernel: [    5.104525] init: Console is alive
Thu Mar  8 18:25:32 2018 user.info kernel: [    5.108179] init: - watchdog -
Thu Mar  8 18:25:32 2018 user.info kernel: [    6.635244] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.771728] usbcore: registered new interface driver usbfs
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.777391] usbcore: registered new interface driver hub
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.782916] usbcore: registered new device driver usb
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    6.827800] SCSI subsystem initialized
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.837573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.845830] ehci-platform: EHCI generic platform driver
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.851285] ehci-platform ehci-platform: EHCI Host Controller
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.857161] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.867292] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.890365] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.897613] hub 1-0:1.0: USB hub found
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.901770] hub 1-0:1.0: 1 port detected
Thu Mar  8 18:25:32 2018 kern.info kernel: [    6.910251] usbcore: registered new interface driver usb-storage
Thu Mar  8 18:25:32 2018 user.info kernel: [    6.917104] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Mar  8 18:25:32 2018 user.info kernel: [    6.927363] init: - preinit -
Thu Mar  8 18:25:32 2018 kern.info kernel: [    7.400406] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Mar  8 18:25:32 2018 kern.info kernel: [    7.479950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Mar  8 18:25:32 2018 kern.info kernel: [    7.643683] hub 1-1:1.0: USB hub found
Thu Mar  8 18:25:32 2018 kern.info kernel: [    7.650559] hub 1-1:1.0: 4 ports detected
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    7.670824] random: procd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    7.940347] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
Thu Mar  8 18:25:32 2018 kern.info kernel: [    8.198695] usb-storage 1-1.2:1.2: USB Mass Storage device detected
Thu Mar  8 18:25:32 2018 kern.info kernel: [    8.205733] scsi host0: usb-storage 1-1.2:1.2
Thu Mar  8 18:25:32 2018 kern.info kernel: [    9.091583] eth0: link up (1000Mbps/Full duplex)
Thu Mar  8 18:25:32 2018 kern.info kernel: [    9.096351] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    9.216181] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Thu Mar  8 18:25:32 2018 kern.notice kernel: [    9.229242] sd 0:0:0:0: [sda] Attached SCSI removable disk
Thu Mar  8 18:25:32 2018 user.info kernel: [    9.788505] mount_root: loading kmods from internal overlay
Thu Mar  8 18:25:32 2018 user.info kernel: [    9.830555] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Mar  8 18:25:32 2018 user.info kernel: [    9.839126] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   10.124215] jffs2: notice: (461) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.140316] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.150580] block: extroot: not configured
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   10.194025] jffs2: notice: (458) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.378229] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.394831] block: extroot: not configured
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.399876] mount_root: switching to jffs2 overlay
Thu Mar  8 18:25:32 2018 user.warn kernel: [   10.412379] urandom-seed: Seeding with /etc/urandom.seed
Thu Mar  8 18:25:32 2018 kern.info kernel: [   10.533797] eth0: link down
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.546740] procd: - early -
Thu Mar  8 18:25:32 2018 user.info kernel: [   10.549762] procd: - watchdog -
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.127684] random: jshn: uninitialized urandom read (4 bytes read, 21 bits of entropy available)
Thu Mar  8 18:25:32 2018 user.info kernel: [   11.292234] procd: - watchdog -
Thu Mar  8 18:25:32 2018 user.info kernel: [   11.295684] procd: - ubus -
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.438671] random: jshn: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.692466] random: jshn: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.704060] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.720502] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.729832] random: ubus: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.739064] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.748597] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 kern.notice kernel: [   11.762096] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Thu Mar  8 18:25:32 2018 user.info kernel: [   11.772000] procd: - init -
Thu Mar  8 18:25:32 2018 user.info kernel: [   12.879624] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Mar  8 18:25:32 2018 kern.info kernel: [   12.930153] tun: Universal TUN/TAP device driver, 1.6
Thu Mar  8 18:25:32 2018 kern.info kernel: [   12.935336] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Mar  8 18:25:32 2018 kern.info kernel: [   12.972006] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.011988] fuse init (API version 7.23)
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.026003] usbcore: registered new interface driver cdc_acm
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.031791] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.061948] usbcore: registered new interface driver cdc_wdm
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.082543] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.090709] Backport generated by backports.git backports-20160324-13-g24da7d3c
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.123095] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.147812] nf_conntrack version 0.5.0 (1956 buckets, 7824 max)
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.249887] usbcore: registered new interface driver usblp
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.285259] usbcore: registered new interface driver usbserial
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.291333] usbcore: registered new interface driver usbserial_generic
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.298047] usbserial: USB Serial support registered for generic
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.354534] xt_time: kernel timezone is -0000
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.425681] cdc_ether 1-1.2:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.437182] usbcore: registered new interface driver cdc_ether
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.461585] usbcore: registered new interface driver cdc_ncm
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.527668] usbcore: registered new interface driver huawei_cdc_ncm
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.654002] PPP generic driver version 2.4.2
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.670284] NET: Registered protocol family 24
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.682708] usbcore: registered new interface driver qmi_wwan
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.702998] usbcore: registered new interface driver rndis_host
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.722650] usbcore: registered new interface driver sierra
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.728411] usbserial: USB Serial support registered for Sierra USB modem
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.752566] usbcore: registered new interface driver sierra_net
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.822629] usbcore: registered new interface driver cdc_mbim
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.844154] usbcore: registered new interface driver option
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.849908] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.885266] usbcore: registered new interface driver qcserial
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.891267] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.933593] ath: EEPROM regdomain: 0x0
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.933612] ath: EEPROM indicates default country code should be used
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.933623] ath: doing EEPROM country->regdmn map search
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.933644] ath: country maps to regdmn code: 0x3a
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.933655] ath: Country alpha2 being used: US
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.933665] ath: Regpair used: 0x3a
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.945776] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.950480] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Thu Mar  8 18:25:32 2018 kern.warn kernel: [   13.957372] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.968489] ath: EEPROM regdomain: 0x0
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.968506] ath: EEPROM indicates default country code should be used
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.968516] ath: doing EEPROM country->regdmn map search
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.968537] ath: country maps to regdmn code: 0x3a
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.968548] ath: Country alpha2 being used: US
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.968558] ath: Regpair used: 0x3a
Thu Mar  8 18:25:32 2018 kern.debug kernel: [   13.978636] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Thu Mar  8 18:25:32 2018 kern.info kernel: [   13.983396] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=40
Thu Mar  8 18:25:32 2018 user.info kernel: [   14.070766] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Mar  8 18:25:35 2018 user.notice : Added device handler type: 8021ad
Thu Mar  8 18:25:35 2018 user.notice : Added device handler type: 8021q
Thu Mar  8 18:25:35 2018 user.notice : Added device handler type: macvlan
Thu Mar  8 18:25:35 2018 user.notice : Added device handler type: bridge
Thu Mar  8 18:25:35 2018 user.notice : Added device handler type: Network device
Thu Mar  8 18:25:35 2018 user.notice : Added device handler type: tunnel
Thu Mar  8 18:25:36 2018 daemon.err block: /dev/mtdblock6 is already mounted on /rom
Thu Mar  8 18:25:36 2018 daemon.err block: /dev/mtdblock7 is already mounted on /overlay
Thu Mar  8 18:25:37 2018 authpriv.info dropbear[1159]: Not backgrounding
Thu Mar  8 18:25:41 2018 kern.info kernel: [   25.415198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Mar  8 18:25:41 2018 kern.info kernel: [   25.435229] device eth0.1 entered promiscuous mode
Thu Mar  8 18:25:41 2018 kern.info kernel: [   25.440102] device eth0 entered promiscuous mode
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar  8 18:25:41 2018 kern.info kernel: [   25.457175] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'lan' is now up
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar  8 18:25:41 2018 kern.err kernel: [   25.517527] cdc_ether 1-1.2:1.0 eth1: kevent 12 may have been dropped
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'wan' is enabled
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Mar  8 18:25:41 2018 kern.info kernel: [   25.533723] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Thu Mar  8 18:25:41 2018 daemon.info odhcpd[1110]: Raising SIGUSR1 due to address change on br-lan
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Network device 'eth1' link is up
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'wan' has link connectivity 
Thu Mar  8 18:25:41 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Mar  8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: started, v1.25.1
Thu Mar  8 18:25:42 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Thu Mar  8 18:25:42 2018 daemon.notice odhcpd[1110]: Failed to send to ff02::1%br-lan (Address not available)
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050530] ath: EEPROM regdomain: 0x8268
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050551] ath: EEPROM indicates we should expect a country code
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050566] ath: doing EEPROM country->regdmn map search
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050580] ath: country maps to regdmn code: 0x37
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050593] ath: Country alpha2 being used: PL
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050603] ath: Regpair used: 0x37
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050616] ath: regdomain 0x8268 dynamically updated by user
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050703] ath: EEPROM regdomain: 0x8268
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050713] ath: EEPROM indicates we should expect a country code
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050727] ath: doing EEPROM country->regdmn map search
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050739] ath: country maps to regdmn code: 0x37
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050750] ath: Country alpha2 being used: PL
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050760] ath: Regpair used: 0x37
Thu Mar  8 18:25:42 2018 kern.debug kernel: [   27.050772] ath: regdomain 0x8268 dynamically updated by user
Thu Mar  8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: sending discover
Thu Mar  8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: sending select for 192.168.8.100
Thu Mar  8 18:25:42 2018 daemon.notice netifd: wan (1295): udhcpc: lease of 192.168.8.100 obtained, lease time 86400
Thu Mar  8 18:25:42 2018 daemon.notice netifd: radio0 (1244): sh: acs_survey: out of range
Thu Mar  8 18:25:43 2018 kern.info kernel: [   27.351656] eth0: link up (1000Mbps/Full duplex)
Thu Mar  8 18:25:43 2018 kern.info kernel: [   27.356430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Mar  8 18:25:43 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar  8 18:25:43 2018 kern.info kernel: [   27.423737] br-lan: port 1(eth0.1) entered forwarding state
Thu Mar  8 18:25:43 2018 kern.info kernel: [   27.429452] br-lan: port 1(eth0.1) entered forwarding state
Thu Mar  8 18:25:43 2018 kern.info kernel: [   27.435253] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Thu Mar  8 18:25:43 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Mar  8 18:25:43 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Mar  8 18:25:43 2018 daemon.notice netifd: Interface 'wan6' has link connectivity 
Thu Mar  8 18:25:43 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Mar  8 18:25:43 2018 daemon.notice netifd: bridge 'br-lan' link is up
Thu Mar  8 18:25:43 2018 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar  8 18:25:43 2018 kern.info kernel: [   27.580435] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar  8 18:25:43 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar  8 18:25:43 2018 daemon.notice netifd: Interface 'wan' is now up
Thu Mar  8 18:25:44 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Thu Mar  8 18:25:44 2018 daemon.notice odhcpd[1110]: Failed to send to ff02::1%br-lan (Address not available)
Thu Mar  8 18:25:45 2018 kern.info kernel: [   29.420353] br-lan: port 1(eth0.1) entered forwarding state
Thu Mar  8 18:25:45 2018 daemon.err odhcp6c[1436]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Mar  8 18:25:45 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Mar  8 18:25:46 2018 kern.info kernel: [   30.338990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar  8 18:25:46 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Thu Mar  8 18:25:46 2018 kern.info kernel: [   30.407549] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Thu Mar  8 18:25:46 2018 kern.info kernel: [   30.474267] device wlan0 entered promiscuous mode
Thu Mar  8 18:25:46 2018 kern.info kernel: [   30.498424] device wlan1 entered promiscuous mode
Thu Mar  8 18:25:46 2018 kern.info kernel: [   30.503362] br-lan: port 3(wlan1) entered forwarding state
Thu Mar  8 18:25:46 2018 kern.info kernel: [   30.508956] br-lan: port 3(wlan1) entered forwarding state
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: wlan0: ACS-STARTED 
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Thu Mar  8 18:25:46 2018 daemon.notice hostapd: wlan1: ACS-STARTED 
Thu Mar  8 18:25:47 2018 kern.info kernel: [   31.340450] br-lan: port 3(wlan1) entered disabled state
Thu Mar  8 18:25:48 2018 daemon.info procd: - init complete -
Thu Mar  8 18:25:49 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Mar 12 21:05:03 2018 user.notice ddns-scripts[1801]: myddns_ipv4: PID '1801' started at 2018-03-12 21:05
Mon Mar 12 21:05:03 2018 user.warn ddns-scripts[1801]: myddns_ipv4: Service section disabled! - TERMINATE
Mon Mar 12 21:05:03 2018 user.warn ddns-scripts[1801]: myddns_ipv4: PID '1801' exit WITH ERROR '1' at 2018-03-12 21:05
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: started, version 2.78 cachesize 150
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: DNS service limited to local subnets
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq-dhcp[1896]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using local addresses only for domain lan
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: reading /tmp/resolv.conf.auto
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using local addresses only for domain lan
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using nameserver 192.168.8.1#53
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: using nameserver 192.168.8.1#53
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: read /etc/hosts - 4 addresses
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/odhcpd - 0 addresses
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Mar 12 21:05:05 2018 daemon.info dnsmasq-dhcp[1896]: read /etc/ethers - 0 addresses
Mon Mar 12 21:05:06 2018 daemon.notice hostapd: wlan0: ACS-COMPLETED freq=2412 channel=1
Mon Mar 12 21:05:06 2018 daemon.notice hostapd: wlan0: interface state ACS->HT_SCAN
Mon Mar 12 21:05:08 2018 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=1 sec=5 based on overlapping BSSes
Mon Mar 12 21:05:08 2018 daemon.err hostapd: Using interface wlan0 with hwaddr 00:90:a9:0b:a5:0b and ssid "WD-N750"
Mon Mar 12 21:05:08 2018 kern.info kernel: [   39.766015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Mar 12 21:05:08 2018 kern.info kernel: [   39.772670] br-lan: port 2(wlan0) entered forwarding state
Mon Mar 12 21:05:08 2018 kern.info kernel: [   39.778312] br-lan: port 2(wlan0) entered forwarding state
Mon Mar 12 21:05:08 2018 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Mon Mar 12 21:05:08 2018 daemon.notice hostapd: wlan0: AP-ENABLED 
Mon Mar 12 21:05:08 2018 daemon.notice netifd: Network device 'wlan0' link is up
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=5220 channel=44
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: interface state ACS->HT_SCAN
Mon Mar 12 21:05:10 2018 daemon.err hostapd: Using interface wlan1 with hwaddr 00:90:a9:0b:a5:0d and ssid "WD-N750-5GHz"
Mon Mar 12 21:05:10 2018 kern.info kernel: [   41.770343] br-lan: port 2(wlan0) entered forwarding state
Mon Mar 12 21:05:10 2018 kern.info kernel: [   41.951357] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Mon Mar 12 21:05:10 2018 kern.info kernel: [   41.958005] br-lan: port 3(wlan1) entered forwarding state
Mon Mar 12 21:05:10 2018 kern.info kernel: [   41.963670] br-lan: port 3(wlan1) entered forwarding state
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Mon Mar 12 21:05:10 2018 daemon.notice hostapd: wlan1: AP-ENABLED 
Mon Mar 12 21:05:10 2018 daemon.notice netifd: Network device 'wlan1' link is up
Mon Mar 12 21:05:11 2018 daemon.info hostapd: wlan0: STA 80:ea:23:12:ca:60 IEEE 802.11: authenticated
Mon Mar 12 21:05:11 2018 daemon.info hostapd: wlan0: STA 80:ea:23:12:ca:60 IEEE 802.11: associated (aid 1)
Mon Mar 12 21:05:11 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 80:ea:23:12:ca:60
Mon Mar 12 21:05:11 2018 daemon.info hostapd: wlan0: STA 80:ea:23:12:ca:60 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:12 2018 kern.info kernel: [   43.960361] br-lan: port 3(wlan1) entered forwarding state
Mon Mar 12 21:05:14 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:14 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:14 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:05:15 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:15 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:05:16 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 IEEE 802.11: authenticated
Mon Mar 12 21:05:16 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 IEEE 802.11: associated (aid 2)
Mon Mar 12 21:05:16 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 74:2f:68:9d:4d:a4
Mon Mar 12 21:05:16 2018 daemon.info hostapd: wlan0: STA 74:2f:68:9d:4d:a4 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:16 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.2.161 74:2f:68:9d:4d:a4 
Mon Mar 12 21:05:16 2018 daemon.info dnsmasq-dhcp[1896]: DHCPACK(br-lan) 192.168.2.161 74:2f:68:9d:4d:a4 bartekk
Mon Mar 12 21:05:17 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:17 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:05:18 2018 kern.notice kernel: [   49.317371] random: nonblocking pool is initialized
Mon Mar 12 21:05:19 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:19 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:19 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 000494bb969ec98f8fe3c27ecbab5bacd832 on br-lan: ok fd42:91a4:9528::1ce/128 
Mon Mar 12 21:05:20 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:21 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:21 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:05:25 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 IEEE 802.11: authenticated
Mon Mar 12 21:05:25 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 IEEE 802.11: associated (aid 3)
Mon Mar 12 21:05:25 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 10:2a:b3:7b:2e:18
Mon Mar 12 21:05:25 2018 daemon.info hostapd: wlan0: STA 10:2a:b3:7b:2e:18 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:26 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPDISCOVER(br-lan) 10:2a:b3:7b:2e:18 
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPOFFER(br-lan) 192.168.2.228 10:2a:b3:7b:2e:18 
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.1.228 10:2a:b3:7b:2e:18 
Mon Mar 12 21:05:29 2018 daemon.info dnsmasq-dhcp[1896]: DHCPNAK(br-lan) 192.168.1.228 10:2a:b3:7b:2e:18 wrong server-ID
Mon Mar 12 21:05:29 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:29 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:05:30 2018 daemon.info hostapd: wlan0: STA 74:23:44:a8:e8:c1 IEEE 802.11: authenticated
Mon Mar 12 21:05:30 2018 daemon.info hostapd: wlan0: STA 74:23:44:a8:e8:c1 IEEE 802.11: associated (aid 4)
Mon Mar 12 21:05:30 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 74:23:44:a8:e8:c1
Mon Mar 12 21:05:30 2018 daemon.info hostapd: wlan0: STA 74:23:44:a8:e8:c1 WPA: pairwise key handshake completed (RSN)
Mon Mar 12 21:05:31 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPDISCOVER(br-lan) 74:23:44:a8:e8:c1 
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPOFFER(br-lan) 192.168.2.222 74:23:44:a8:e8:c1 
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPREQUEST(br-lan) 192.168.1.222 74:23:44:a8:e8:c1 
Mon Mar 12 21:05:34 2018 daemon.info dnsmasq-dhcp[1896]: DHCPNAK(br-lan) 192.168.1.222 74:23:44:a8:e8:c1 wrong server-ID
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq[1896]: read /etc/hosts - 4 addresses
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/odhcpd - 0 addresses
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq[1896]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Mar 12 21:05:36 2018 daemon.info dnsmasq-dhcp[1896]: read /etc/ethers - 0 addresses
Mon Mar 12 21:05:41 2018 daemon.warn dnsmasq[1896]: nameserver 192.168.8.1 refused to do a recursive query
Mon Mar 12 21:05:45 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:05:45 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:06:16 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:06:16 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:06:27 2018 authpriv.info dropbear[2721]: Child connection from 192.168.2.161:36616
Mon Mar 12 21:06:30 2018 authpriv.notice dropbear[2721]: Password auth succeeded for 'root' from 192.168.2.161:36616
Mon Mar 12 21:07:14 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:07:14 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:09:23 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:09:23 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:10:10 2018 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 74:23:44:a8:e8:c1
Mon Mar 12 21:10:21 2018 daemon.info odhcpd[1110]: Using a RA lifetime of 0 seconds on br-lan
Mon Mar 12 21:11:15 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:11:15 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128 
Mon Mar 12 21:13:08 2018 daemon.notice odhcpd[1110]: Got DHCPv6 request
Mon Mar 12 21:13:08 2018 daemon.warn odhcpd[1110]: DHCPV6 SOLICIT IA_NA from 0003000180ea2312ca60 on br-lan: ok fd42:91a4:9528::113/128

root@LEDE:~# cat /tmp/dhcp.leases
1520928316 74:2f:68:9d:4d:a4 192.168.2.161 bartekk ff:f8:03:89:63:00:02:00:00:ab:11:38:49:a7:1c:a9:87:5c:5b

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 8 z 36)

Znalezione posty: 176 do 200 z 882

176 Odpowiedź przez Bartekk 2020-01-16 11:26:17

Odp: przerobienie Check Point 600 na openWRT (141 odpowiedzi, napisanych Sprzęt / Hardware)

177 Odpowiedź przez Bartekk 2020-01-16 09:44:33

Odp: przerobienie Check Point 600 na openWRT (141 odpowiedzi, napisanych Sprzęt / Hardware)

178 Odpowiedź przez Bartekk 2020-01-05 12:00:55

Odp: WD N750 - wylaczenie diod switcha (6 odpowiedzi, napisanych Oprogramowanie / Software)

179 Odpowiedź przez Bartekk 2020-01-04 18:16:44

Odp: WD N750 - wylaczenie diod switcha (6 odpowiedzi, napisanych Oprogramowanie / Software)

180 Odpowiedź przez Bartekk 2020-01-04 17:55:02

Odp: WD N750 - wylaczenie diod switcha (6 odpowiedzi, napisanych Oprogramowanie / Software)

181 Temat przez Bartekk 2020-01-04 16:39:17

Temat: WD N750 - wylaczenie diod switcha (6 odpowiedzi, napisanych Oprogramowanie / Software)

182 Odpowiedź przez Bartekk 2019-05-22 19:09:29

Odp: openwrt i nsa310 (21 odpowiedzi, napisanych Oprogramowanie / Software)

183 Odpowiedź przez Bartekk 2019-05-22 19:05:41

Odp: OpenWrt i netflix (7 odpowiedzi, napisanych Oprogramowanie / Software)

184 Odpowiedź przez Bartekk 2019-05-17 07:44:40

Odp: openwrt i nsa310 (21 odpowiedzi, napisanych Oprogramowanie / Software)

185 Odpowiedź przez Bartekk 2019-05-04 11:25:20

Odp: openwrt i nsa310 (21 odpowiedzi, napisanych Oprogramowanie / Software)

186 Odpowiedź przez Bartekk 2019-04-18 19:24:11

Odp: Post build script (6 odpowiedzi, napisanych Oprogramowanie / Software)

187 Odpowiedź przez Bartekk 2019-04-18 19:15:07

Odp: Post build script (6 odpowiedzi, napisanych Oprogramowanie / Software)

188 Odpowiedź przez Bartekk 2019-04-18 18:45:21

Odp: Post build script (6 odpowiedzi, napisanych Oprogramowanie / Software)

189 Temat przez Bartekk 2019-04-18 18:37:18

Temat: Post build script (6 odpowiedzi, napisanych Oprogramowanie / Software)

190 Temat przez Bartekk 2018-09-24 16:40:19

Temat: 2x WT3020 jako AP Client (0 odpowiedzi, napisanych Oprogramowanie / Software)

191 Odpowiedź przez Bartekk 2018-07-05 17:37:17

Odp: OpenWRT + USB Bluetooth + żarówka 230v RGB BT (4 odpowiedzi, napisanych Oprogramowanie / Software)

192 Odpowiedź przez Bartekk 2018-06-06 18:20:11

Odp: Ethernet na usb do netbooka (12 odpowiedzi, napisanych Sprzęt / Hardware)

193 Odpowiedź przez Bartekk 2018-05-30 20:06:59

Odp: N750 - niska wydajność lan (1 odpowiedzi, napisanych Oprogramowanie / Software)

194 Temat przez Bartekk 2018-05-28 17:35:59

Temat: N750 - niska wydajność lan (1 odpowiedzi, napisanych Oprogramowanie / Software)

195 Odpowiedź przez Bartekk 2018-03-18 19:22:08

Odp: LEDE n750 dhcp (14 odpowiedzi, napisanych Oprogramowanie / Software)

196 Odpowiedź przez Bartekk 2018-03-18 19:04:25

Odp: Banana Pi R2 Router (44 odpowiedzi, napisanych Inne)

197 Odpowiedź przez Bartekk 2018-03-18 19:01:43

Odp: LEDE n750 dhcp (14 odpowiedzi, napisanych Oprogramowanie / Software)

198 Odpowiedź przez Bartekk 2018-03-12 21:38:14

Odp: LEDE n750 dhcp (14 odpowiedzi, napisanych Oprogramowanie / Software)

199 Odpowiedź przez Bartekk 2018-03-12 21:25:17

Odp: LEDE n750 dhcp (14 odpowiedzi, napisanych Oprogramowanie / Software)

200 Odpowiedź przez Bartekk 2018-03-12 21:18:39

Odp: LEDE n750 dhcp (14 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 176 do 200 z 882