FAQ o OpenWrt | Sprzedam różne routery | Oddam

2023-08-13 23:03:58

no dobra, zbudowałem - zmodyfikowałem dtsi jak radzili.
nie bangla

    0.000000] Linux version 4.14.275 (avru@DESKTOP-SFMK1K8) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11427-9ce6aa9d8d)) #0 Sat Apr 16 13:13:32 2022
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is TP-Link TL-WR841N v13
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 804a9460, node_mem_map 81000040
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x47c with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0002e320
[    0.000000] Readback ErrCtl register=0002e320
[    0.000000] Memory: 58696K/65536K available (3729K kernel code, 169K rwdata, 868K rodata, 1176K init, 200K bss, 6840K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] timer_probe: no matching timers found
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.007560] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.073512] pid_max: default: 32768 minimum: 301
[    0.078197] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.084550] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.097267] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106760] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.112696] pinctrl core: initialized pinctrl subsystem
[    0.118765] NET: Registered protocol family 16
[    0.148470] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.154073] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.159670] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.169554] clocksource: Switched to clocksource MIPS
[    0.175563] NET: Registered protocol family 2
[    0.179992] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
[    0.186942] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.193687] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.199800] TCP: Hash tables configured (established 1024 bind 1024)
[    0.206058] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.211702] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.217906] NET: Registered protocol family 1
[    0.222123] PCI: CLS 0 bytes, default 32
[    0.225375] Crashlog allocated RAM at address 0x3f00000
[    0.232022] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.243970] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.249595] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.268836] io scheduler noop registered
[    0.272629] io scheduler deadline registered (default)
[    0.278448] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.285775] console [ttyS0] disabled
[    0.289215] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.297988] console [ttyS0] enabled
[    0.304988] bootconsole [early0] disabled
[    0.314389] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    0.326285] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[    0.331086] 4 fixed-partitions partitions found on MTD device spi0.0
[    0.337527] Creating 4 MTD partitions on "spi0.0":
[    0.342417] 0x000000000000-0x000000020000 : "boot"
[    0.348205] 0x000000020000-0x0000007c0000 : "firmware"
[    0.356289] 2 tplink-fw partitions found on MTD device firmware
[    0.362370] Creating 2 MTD partitions on "firmware":
[    0.367418] 0x000000000000-0x000000187e04 : "kernel"
[    0.373423] 0x000000187e04-0x0000007a0000 : "rootfs"
[    0.379228] mtd: device 3 (rootfs) set to be root filesystem
[    0.386475] 1 squashfs-split partitions found on MTD device rootfs
[    0.392820] 0x000000370000-0x0000007a0000 : "rootfs_data"
[    0.399212] 0x0000007c0000-0x0000007d0000 : "config"
[    0.405212] 0x0000007d0000-0x000000800000 : "factory"
[    0.423939] rt3050-esw 10110000.esw: link changed 0x00
[    0.430899] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    0.441097] NET: Registered protocol family 10
[    0.449531] Segment Routing with IPv6
[    0.453442] NET: Registered protocol family 17
[    0.458004] 8021q: 802.1Q VLAN Support v1.8
[    0.470853] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    0.484469] Freeing unused kernel memory: 1176K
[    0.489065] This architecture does not have kernel memory protection.
[    1.585621] init: Console is alive
[    1.589331] init: - watchdog -
[    2.204313] random: fast init done
[    2.667779] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.843971] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.861900] init: - preinit -
[    4.022933] rt3050-esw 10110000.esw: link changed 0x00
[    4.203561] random: procd: uninitialized urandom read (4 bytes read)
[    7.002993] rt3050-esw 10110000.esw: link changed 0x02
[    7.411780] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    7.444470] urandom-seed: Seed file not found (/etc/urandom.seed)
[    7.571596] procd: - early -
[    7.574651] procd: - watchdog -
[    8.217958] procd: - watchdog -
[    8.221610] procd: - ubus -
[    8.273932] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.281748] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.288760] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.296353] procd: - init -
[    9.314296] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.344689] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.368669] Loading modules backported from Linux version v4.19.237-0-ga6e4a1818efa
[    9.376521] Backport generated by backports.git v4.19.237-1-0-gffb89fd9
[    9.411093] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.435109] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[    9.560370] xt_time: kernel timezone is -0000
[    9.742971] mt76_wmac 10300000.wmac: ASIC revision: 76280001
[    9.833917] urngd: v1.0.2 started.
[   10.035180] random: crng init done
[   10.038639] random: 6 urandom warning(s) missed due to ratelimiting
[   10.791697] mt76_wmac 10300000.wmac: Firmware Version: 20151201
[   10.797719] mt76_wmac 10300000.wmac: Build Time: 20151201183641
[   10.839571] mt76_wmac 10300000.wmac: firmware init done
[   11.010549] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.105035] PPP generic driver version 2.4.2
[   11.120595] NET: Registered protocol family 24
[   11.131778] kmodloader: done loading kernel modules from /etc/modules.d/*
[   59.649787] rt3050-esw 10110000.esw: link changed 0x00
[   61.830302] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   61.837301] jffs2_build_filesystem(): unlocking the mtd device...
[   61.842194] done.
[   61.850489] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   62.675688] rt3050-esw 10110000.esw: link changed 0x02
[   65.975673] br-lan: port 1(eth0.1) entered blocking state
[   65.981250] br-lan: port 1(eth0.1) entered disabled state
[   65.987077] device eth0.1 entered promiscuous mode
[   65.992140] device eth0 entered promiscuous mode
[   66.034478] br-lan: port 1(eth0.1) entered blocking state
[   66.040033] br-lan: port 1(eth0.1) entered forwarding state
[   66.045922] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   67.013599] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   83.815959] done.
[   83.817967] jffs2: notice: (977) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   83.993283] overlayfs: upper fs does not support tmpfile.
[  189.982060] rt3050-esw 10110000.esw: link changed 0x03
root@OpenWrt:~# lsusb
unable to initialize libusb: -99

2023-08-13 19:51:50

hmm masz gdzieś może obraz z usb do v13 w bylejakiej wersji ? coś mi nie idzie zbudowanie tego albo po prostu nie działa xD

2023-08-13 18:38:42

stare w sensie ? 18 ?
było tam już wbudowane wireguard ?

2023-08-13 18:25:35

Cześć,
muszę na szybko poskładać na działkę taki zdalny punkt dostępowy do kamer IP,
odkopałem już tego dziadka wn841 v13, robię mu właśnie mod na USB,
zastanawiam się tylko jaką wersję openwrt tam pakować, najnowsza zje mi chyba za dużo zasobów z tych 64MB ram.

potrzebuję:
USB
obsługę modemu LTE E3272 (przerabiać na hilink ?)
pakiet 1wire pod gpio
Wireguard client
ffmpeg lub podobny pakiet pod pobranie od czasu do czasu ramki z kamer i zapisie na USB

wifi zbędne.

2023-08-08 13:45:57

Cezary napisał/a:

Ale wgrałeś z openwrt czy moje z luci? Jeżeli moje to te z luci maja tylko więcej pakietów po prostu.

jedno i drugie twoje

Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] percpu: Embedded 11 pages/cpu s14736 r8192 d22128 u45056
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s14736 r8192 d22128 u45056 alloc=11*4096
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] Writing ErrCtl register=00030340
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] Readback ErrCtl register=00030340
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] Memory: 249124K/262144K available (7292K kernel code, 623K rwdata, 880K rodata, 1240K init, 226K bss, 13020K reserved, 0K cma-reserved)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000]     Tracing variant of Tasks RCU enabled.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] NR_IRQS: 256
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.008041] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.066221] pid_max: default: 32768 minimum: 301
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.071681] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.078892] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.090503] rcu: Hierarchical SRCU implementation.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.095976] smp: Bringing up secondary CPUs ...
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.101434] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.101458] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Jul 27 13:55:05 2023 kern.warn kernel: [    0.101473] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.101517] CPU1 revision is: 0001992f (MIPS 1004Kc)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.160761] Synchronize counters for CPU 1: done.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.193293] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.193314] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Jul 27 13:55:05 2023 kern.warn kernel: [    0.193326] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.193353] CPU2 revision is: 0001992f (MIPS 1004Kc)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.252260] Synchronize counters for CPU 2: done.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.282885] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.282906] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Thu Jul 27 13:55:05 2023 kern.warn kernel: [    0.282918] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.282949] CPU3 revision is: 0001992f (MIPS 1004Kc)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.337447] Synchronize counters for CPU 3: done.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.367304] smp: Brought up 1 node, 4 CPUs
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.376456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.386258] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.393363] pinctrl core: initialized pinctrl subsystem
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.400209] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.406830] thermal_sys: Registered thermal governor 'step_wise'
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    0.412818] FPU Affinity set after 11720 emulations
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.431437] clocksource: Switched to clocksource GIC
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.437866] NET: Registered PF_INET protocol family
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.442950] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.451206] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.459558] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.467242] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.474851] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.481961] TCP: Hash tables configured (established 2048 bind 2048)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.488399] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.494894] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.502201] NET: Registered PF_UNIX/PF_LOCAL protocol family
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.507839] PCI: CLS 0 bytes, default 32
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.514625] workingset: timestamp_bits=14 max_order=16 bucket_order=2
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.526436] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.532270] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.543657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.555126] mt7621_gpio 1e000600.gpio: registering 32 gpios
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.561011] mt7621_gpio 1e000600.gpio: registering 32 gpios
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.566984] mt7621_gpio 1e000600.gpio: registering 32 gpios
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.573027] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.579693] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.588462] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.596564] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.961435] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.968330] mt7621-pci 1e140000.pcie: PCIE0 enabled
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.973207] mt7621-pci 1e140000.pcie: PCIE1 enabled
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.978023] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.985239] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.991529] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    0.996933] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.003791] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.009942] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.015893] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.022117] pci 0000:00:00.0: reg 0x14: [mem 0x60600000-0x6060ffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.028409] pci 0000:00:00.0: supports D1
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.032350] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.038729] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.044766] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.050960] pci 0000:00:01.0: reg 0x14: [mem 0x60610000-0x6061ffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.057269] pci 0000:00:01.0: supports D1
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.061187] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.068963] pci 0000:01:00.0: [14c3:7916] type 00 class 0x000280
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.074999] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.082187] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.089321] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.096628] pci 0000:01:00.0: supports D1 D2
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.100805] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.107433] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.123511] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.128668] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.134754] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.141483] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x602fffff pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.148625] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.155511] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.161520] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.168699] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.175894] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.183173] pci 0000:02:00.0: supports D1 D2
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.187350] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.193980] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.210118] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.215320] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.221320] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.228084] pci 0000:00:01.0:   bridge window [mem 0x60400000-0x605fffff pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.235259] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.241870] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.248383] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.255325] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.261895] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.268778] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.275542] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x602fffff pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.282712] pci 0000:00:01.0: BAR 8: assigned [mem 0x60300000-0x603fffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.289426] pci 0000:00:01.0: BAR 9: assigned [mem 0x60400000-0x605fffff pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.296623] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.303368] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.310077] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.316150] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.322216] pci 0000:01:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.329872] pci 0000:01:00.0: BAR 2: assigned [mem 0x60200000-0x60203fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.337589] pci 0000:01:00.0: BAR 4: assigned [mem 0x60204000-0x60204fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.345276] pci 0000:00:00.0: PCI bridge to [bus 01]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.350164] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.356238] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.362976] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x602fffff pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.370130] pci 0000:02:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.377851] pci 0000:02:00.0: BAR 2: assigned [mem 0x60500000-0x60503fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.385548] pci 0000:02:00.0: BAR 4: assigned [mem 0x60504000-0x60504fff 64bit pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.393228] pci 0000:00:01.0: PCI bridge to [bus 02]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.398115] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.404189] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.410902] pci 0000:00:01.0:   bridge window [mem 0x60400000-0x605fffff pref]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.420646] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.431805] printk: console [ttyS0] disabled
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.436109] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.445152] printk: console [ttyS0] enabled
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.453424] printk: bootconsole [early0] disabled
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.466528] spi-mt7621 1e000b00.spi: sys_freq: 220000000
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.473105] spi-nor spi0.0: en25qh128 (16384 Kbytes)
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.478156] 4 fixed-partitions partitions found on MTD device spi0.0
Thu Jul 27 13:55:05 2023 kern.err kernel: [    1.484581] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Thu Jul 27 13:55:05 2023 kern.err kernel: [    1.491960] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Thu Jul 27 13:55:05 2023 kern.err kernel: [    1.499852] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Thu Jul 27 13:55:05 2023 kern.err kernel: [    1.507277] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.514894] Creating 4 MTD partitions on "spi0.0":
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.519686] 0x000000000000-0x000000030000 : "u-boot"
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.525842] 0x000000030000-0x000000040000 : "u-boot-env"
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.532317] 0x000000040000-0x000000050000 : "factory"
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.538473] 0x000000050000-0x000001000000 : "firmware"
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.545055] 2 uimage-fw partitions found on MTD device firmware
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.550992] Creating 2 MTD partitions on "firmware":
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.555965] 0x000000000000-0x0000002aa4c5 : "kernel"
Thu Jul 27 13:55:05 2023 kern.warn kernel: [    1.560914] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.570360] 0x0000002aa4c5-0x000000fb0000 : "rootfs"
Thu Jul 27 13:55:05 2023 kern.warn kernel: [    1.575366] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.585512] mtd: setting mtd5 (rootfs) as root device
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.590672] 1 squashfs-split partitions found on MTD device rootfs
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    1.596871] 0x000000870000-0x000000fb0000 : "rootfs_data"
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.744292] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.758468] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.770651] mtk_soc_eth 1e100000.ethernet wan: mediatek frame engine at 0xbe100000, irq 21
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.780718] i2c_dev: i2c /dev entries driver
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.788138] NET: Registered PF_INET6 protocol family
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.795858] Segment Routing with IPv6
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.799600] In-situ OAM (IOAM) with IPv6
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.803727] NET: Registered PF_PACKET protocol family
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.808892] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.822413] 8021q: 802.1Q VLAN Support v1.8
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.832726] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.858650] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.866440] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.872247] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=23)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.886972] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=24)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.899788] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=25)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.912670] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=26)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.925146] DSA: tree 0 setup
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.935811] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.947071] Freeing unused kernel image (initmem) memory: 1240K
Thu Jul 27 13:55:05 2023 kern.warn kernel: [    1.953089] This architecture does not have kernel memory protection.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    1.959530] Run /sbin/init as init process
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    1.963638]   with arguments:
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    1.963652]     /sbin/init
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    1.963660]   with environment:
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    1.963668]     HOME=/
Thu Jul 27 13:55:05 2023 kern.debug kernel: [    1.963674]     TERM=linux
Thu Jul 27 13:55:05 2023 user.info kernel: [    2.394555] init: Console is alive
Thu Jul 27 13:55:05 2023 user.info kernel: [    2.398352] init: - watchdog -
Thu Jul 27 13:55:05 2023 user.info kernel: [    3.233016] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Jul 27 13:55:05 2023 user.info kernel: [    3.299738] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Jul 27 13:55:05 2023 user.info kernel: [    3.312283] init: - preinit -
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    4.123545] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    4.250783] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    4.289992] random: jshn: uninitialized urandom read (4 bytes read)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    4.618527] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Thu Jul 27 13:55:05 2023 kern.info kernel: [    4.631184] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Jul 27 13:55:05 2023 kern.info kernel: [    4.631900] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Thu Jul 27 13:55:05 2023 kern.info kernel: [    4.647199] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Jul 27 13:55:05 2023 user.notice kernel: [    6.836968] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Thu Jul 27 13:55:05 2023 user.warn kernel: [    6.848937] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Jul 27 13:55:05 2023 user.info kernel: [    6.961899] procd: - early -
Thu Jul 27 13:55:05 2023 user.info kernel: [    6.965039] procd: - watchdog -
Thu Jul 27 13:55:05 2023 user.info kernel: [    7.574854] procd: - watchdog -
Thu Jul 27 13:55:05 2023 user.info kernel: [    7.581562] procd: - ubus -
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    7.644318] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    7.652832] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    7.664161] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Jul 27 13:55:05 2023 user.info kernel: [    7.679374] procd: - init -
Thu Jul 27 13:55:05 2023 user.info kernel: [    8.336740] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Jul 27 13:55:05 2023 user.info kernel: [    8.546761] urngd: v1.0.2 started.
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.583580] tun: Universal TUN/TAP device driver, 1.6
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.601263] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.608846] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    8.746592] random: crng init done
Thu Jul 27 13:55:05 2023 kern.notice kernel: [    8.750031] random: 32 urandom warning(s) missed due to ratelimiting
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.816638] pci 0000:00:00.0: enabling device (0000 -> 0003)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.822426] mt7915e_hif 0000:01:00.0: enabling device (0000 -> 0002)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.829259] pci 0000:00:01.0: enabling device (0000 -> 0003)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    8.834999] mt7915e 0000:02:00.0: enabling device (0000 -> 0002)
Thu Jul 27 13:55:05 2023 kern.info kernel: [    9.110307] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20220929104113a
Thu Jul 27 13:55:05 2023 kern.info kernel: [    9.110307]
Thu Jul 27 13:55:05 2023 kern.info kernel: [    9.437659] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20220929104145
Thu Jul 27 13:55:05 2023 kern.info kernel: [    9.471160] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20220929104205
Thu Jul 27 13:55:05 2023 kern.info kernel: [   14.935969] PPP generic driver version 2.4.2
Thu Jul 27 13:55:05 2023 kern.info kernel: [   14.942160] NET: Registered PF_PPPOX protocol family
Thu Jul 27 13:55:05 2023 kern.info kernel: [   14.951266] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Thu Jul 27 13:55:05 2023 kern.info kernel: [   14.959156] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Thu Jul 27 13:55:05 2023 user.info kernel: [   14.976734] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Jul 27 13:55:05 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf
Thu Jul 27 13:55:06 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating providers.cnf
Thu Jul 27 13:55:06 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Jul 27 13:55:06 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Jul 27 13:55:06 2023 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
...
Thu Jul 27 13:55:15 2023 daemon.notice wpa_supplicant[1605]: Successfully initialized wpa_supplicant
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: bonding
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: 8021ad
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: 8021q
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: macvlan
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: veth
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: bridge
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: Network device
Thu Jul 27 13:55:16 2023 user.notice : Added device handler type: tunnel
Thu Jul 27 13:55:16 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: sh: write error: No such file or directory
Thu Jul 27 13:55:16 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: sh: write error: No such file or directory
Thu Jul 27 13:55:18 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Thu Jul 27 13:55:18 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Thu Jul 27 13:55:18 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Thu Jul 27 13:55:18 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Thu Jul 27 13:55:18 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Thu Jul 27 13:55:18 2023 user.info adblock-4.1.5[1912]: backup directory '/tmp/adblock-Backup' created
Thu Jul 27 13:55:18 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.011569] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.042198] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.050548] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.060027] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.072003] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.081289] br-lan: port 1(lan1) entered blocking state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.086768] br-lan: port 1(lan1) entered disabled state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.094048] device lan1 entered promiscuous mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.098720] device eth0 entered promiscuous mode
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'lan' is enabled
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'lan' is setting up now
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'lan' is now up
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.137351] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.146390] br-lan: port 2(lan2) entered blocking state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.151782] br-lan: port 2(lan2) entered disabled state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.158924] device lan2 entered promiscuous mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.176731] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.185698] br-lan: port 3(lan3) entered blocking state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.190989] br-lan: port 3(lan3) entered disabled state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.199202] device lan3 entered promiscuous mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.217201] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.226893] br-lan: port 4(lan4) entered blocking state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.232327] br-lan: port 4(lan4) entered disabled state
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.239964] device lan4 entered promiscuous mode
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'loopback' is enabled
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'loopback' is now up
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.263489] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [MediaTek MT7530 PHY] (irq=POLL)
Thu Jul 27 13:55:19 2023 kern.info kernel: [   32.273147] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link mode
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'wan' is enabled
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'wan6' is enabled
Thu Jul 27 13:55:19 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Network device 'eth0' link is up
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Network device 'lo' link is up
Thu Jul 27 13:55:19 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Jul 27 13:55:19 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Thu Jul 27 13:55:19 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Jul 27 13:55:19 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Thu Jul 27 13:55:19 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Thu Jul 27 13:55:19 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Jul 27 13:55:20 2023 kern.warn kernel: [   33.468438] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Thu Jul 27 13:55:20 2023 kern.warn kernel: [   33.475415] jffs2_build_filesystem(): unlocking the mtd device...
Thu Jul 27 13:55:20 2023 kern.warn kernel: [   33.475435] done.
Thu Jul 27 13:55:22 2023 kern.warn kernel: [   33.483627] jffs2_build_filesystem(): erasing all blocks after the end marker...
Thu Jul 27 13:55:22 2023 kern.info kernel: [   34.995506] mt7530-mdio mdio-bus:1f lan4: Link is Up - 1Gbps/Full - flow control off
Thu Jul 27 13:55:22 2023 kern.info kernel: [   35.010804] br-lan: port 4(lan4) entered blocking state
Thu Jul 27 13:55:22 2023 kern.info kernel: [   35.016063] br-lan: port 4(lan4) entered forwarding state
Thu Jul 27 13:55:22 2023 daemon.notice netifd: Network device 'lan4' link is up
Thu Jul 27 13:55:22 2023 daemon.notice netifd: bridge 'br-lan' link is up
Thu Jul 27 13:55:22 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Jul 27 13:55:22 2023 kern.info kernel: [   35.022195] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Jul 27 13:55:23 2023 daemon.err odhcpd[1984]: Failed to send to fe80::d827:27b1:d103:a9d5%lan@br-lan (Address not available)
Thu Jul 27 13:55:23 2023 kern.info kernel: [   36.431745] mtk_soc_eth 1e100000.ethernet wan: Link is Up - 1Gbps/Full - flow control rx/tx
Thu Jul 27 13:55:23 2023 kern.info kernel: [   36.440174] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
Thu Jul 27 13:55:23 2023 daemon.notice netifd: Network device 'wan' link is up
Thu Jul 27 13:55:23 2023 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Jul 27 13:55:23 2023 daemon.notice netifd: Interface 'wan' is setting up now
Thu Jul 27 13:55:23 2023 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Jul 27 13:55:23 2023 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Jul 27 13:55:23 2023 daemon.notice netifd: wan (2807): udhcpc: started, v1.36.1
Thu Jul 27 13:55:23 2023 daemon.err odhcp6c[2806]: Failed to send RS (Address not available)
Thu Jul 27 13:55:24 2023 daemon.err odhcp6c[2806]: Failed to send SOLICIT message to ff02::1:2 (Address not available)
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Jul 27 13:55:25 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Thu Jul 27 13:55:25 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Jul 27 13:55:26 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Thu Jul 27 13:55:26 2023 daemon.notice netifd: Interface 'wan6' is now up
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using nameserver fdc8:8088:82e5::1#53
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 4 names
Thu Jul 27 13:55:26 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Jul 27 13:55:27 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Thu Jul 27 13:55:27 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Thu Jul 27 13:55:27 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 4 names
Thu Jul 27 13:55:27 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Jul 27 13:55:27 2023 daemon.notice netifd: wan (2807): udhcpc: broadcasting discover
Thu Jul 27 13:55:27 2023 daemon.warn odhcpd[1984]: A default route is present but there is no public prefix on lan thus we don't announce a default route by overriding ra_lifetime!
Thu Jul 27 13:55:27 2023 daemon.notice netifd: wan (2807): udhcpc: broadcasting select for 10.0.1.232, server 10.0.1.1
Thu Jul 27 13:55:28 2023 daemon.notice netifd: wan (2807): udhcpc: lease of 10.0.1.232 obtained from 10.0.1.1, lease time 43200
Thu Jul 27 13:55:28 2023 daemon.notice netifd: Interface 'wan6' has lost the connection
Thu Jul 27 13:55:28 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Jul 27 13:55:28 2023 daemon.notice netifd: Interface 'wan' is now up
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using nameserver 10.0.1.1#53
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Jul 27 13:55:28 2023 daemon.notice netifd: Interface 'wan6' is now up
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using nameserver 10.0.1.1#53
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using nameserver fdc8:8088:82e5::1#53
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 4 names
Thu Jul 27 13:55:28 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Jul 27 13:55:29 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Thu Jul 27 13:55:29 2023 user.info adblock-4.1.5[1912]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Thu Jul 27 13:55:30 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Thu Jul 27 13:55:30 2023 user.notice firewall: Reloading firewall due to ifup of wan6 (wan)
Thu Jul 27 13:55:33 2023 user.notice firewall: Reloading firewall due to ifup of wan (wan)
Thu Jul 27 13:55:33 2023 user.notice ddns-scripts[3817]: myddns_ipv6: PID '3817' started at 2023-07-27 13:55
Thu Jul 27 13:55:34 2023 user.warn ddns-scripts[3817]: myddns_ipv6: Service section disabled! - TERMINATE
Thu Jul 27 13:55:34 2023 user.warn ddns-scripts[3817]: myddns_ipv6: PID '3817' exit WITH ERROR '1' at 2023-07-27 13:55
Thu Jul 27 13:55:36 2023 kern.warn kernel: [   49.278054] done.
Thu Jul 27 13:55:36 2023 kern.notice kernel: [   49.280046] jffs2: notice: (2737) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Jul 27 13:55:36 2023 daemon.info mount_root: performing overlay whiteout
Thu Jul 27 13:55:36 2023 kern.warn kernel: [   49.558245] overlayfs: upper fs does not support tmpfile.
Thu Jul 27 13:55:36 2023 daemon.info mount_root: synchronizing overlay
Thu Jul 27 13:55:36 2023 user.notice ddns-scripts[4016]: myddns_ipv4: PID '4016' started at 2023-07-27 13:55
Thu Jul 27 13:55:36 2023 daemon.err mount_root: failed to sync jffs2 overlay
Thu Jul 27 13:55:37 2023 user.warn ddns-scripts[4016]: myddns_ipv4: Service section disabled! - TERMINATE
Thu Jul 27 13:55:37 2023 user.warn ddns-scripts[4016]: myddns_ipv4: PID '4016' exit WITH ERROR '1' at 2023-07-27 13:55
Thu Jul 27 13:55:37 2023 daemon.info procd: - init complete -
Thu Jul 27 13:55:37 2023 daemon.info urandom_seed[4264]: Seed saved (/etc/urandom.seed)
Thu Jul 27 13:55:38 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 12:51:15 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 12:55:43 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:03:09 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:11:07 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:14:44 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:23:13 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:27:09 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:30:37 2023 daemon.err uhttpd[900]: [info] luci: accepted login on / for root from 192.168.1.2
Tue Aug  8 13:34:09 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:34:14 2023 authpriv.info dropbear[4651]: Child connection from 192.168.1.2:3967
Tue Aug  8 13:34:18 2023 authpriv.notice dropbear[4651]: Auth succeeded with blank password for 'root' from 192.168.1.2:3967
Tue Aug  8 13:35:05 2023 authpriv.info dropbear[4743]: Child connection from 192.168.1.2:4020
Tue Aug  8 13:35:09 2023 authpriv.notice dropbear[4743]: Auth succeeded with blank password for 'root' from 192.168.1.2:4020
Tue Aug  8 13:37:49 2023 authpriv.info dropbear[4854]: Child connection from 192.168.1.2:4189
Tue Aug  8 13:37:49 2023 authpriv.notice dropbear[4854]: Auth succeeded with blank password for 'root' from 192.168.1.2:4189
Tue Aug  8 13:38:00 2023 daemon.notice netifd: Interface 'lan' is now down
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.383430] br-lan: port 4(lan4) entered disabled state
Tue Aug  8 13:38:00 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:38:00 2023 daemon.err odhcpd[1984]: Failed to send to ff02::1%lan@br-lan (Network unreachable)
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.404656] device lan1 left promiscuous mode
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.409668] br-lan: port 1(lan1) entered disabled state
Tue Aug  8 13:38:00 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Aug  8 13:38:00 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Aug  8 13:38:00 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Aug  8 13:38:00 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.489006] device lan2 left promiscuous mode
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.493915] br-lan: port 2(lan2) entered disabled state
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.579760] device lan3 left promiscuous mode
Tue Aug  8 13:38:00 2023 kern.info kernel: [ 3080.584608] br-lan: port 3(lan3) entered disabled state
Tue Aug  8 13:38:01 2023 kern.info kernel: [ 3080.670951] device lan4 left promiscuous mode
Tue Aug  8 13:38:01 2023 kern.info kernel: [ 3080.675823] br-lan: port 4(lan4) entered disabled state
Tue Aug  8 13:38:01 2023 kern.info kernel: [ 3080.721590] device eth0 left promiscuous mode
Tue Aug  8 13:38:01 2023 kern.info kernel: [ 3080.726981] mt7530-mdio mdio-bus:1f lan4: Link is Down
Tue Aug  8 13:38:01 2023 kern.info kernel: [ 3080.738224] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'lan' is disabled
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Network device 'lan4' link is down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: bridge 'br-lan' link is down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'lan' has link connectivity loss
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Network device 'eth0' link is down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'loopback' is now down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'loopback' is disabled
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Network device 'lo' link is down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'loopback' has link connectivity loss
Tue Aug  8 13:38:01 2023 daemon.notice netifd: wan (2807): udhcpc: received SIGTERM
Tue Aug  8 13:38:01 2023 daemon.notice netifd: wan (2807): udhcpc: unicasting a release of 10.0.1.232 to 10.0.1.1
Tue Aug  8 13:38:01 2023 daemon.notice netifd: wan (2807): udhcpc: sending release
Tue Aug  8 13:38:01 2023 daemon.notice netifd: wan (2807): udhcpc: entering released state
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'wan6' is now down
Tue Aug  8 13:38:01 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Aug  8 13:38:01 2023 daemon.notice netifd: wan (2807): Command failed: ubus call network.interface notify_proto { "action": 0, "link-up": false, "keep": false, "interface": "wan" } (Permission denied)
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'wan' is now down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'wan' is disabled
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'wan6' is disabled
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Network device 'wan' link is down
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'wan' has link connectivity loss
Tue Aug  8 13:38:01 2023 daemon.notice netifd: Interface 'wan6' has link connectivity loss
Tue Aug  8 13:38:01 2023 kern.info kernel: [ 3081.094189] mtk_soc_eth 1e100000.ethernet wan: Link is Down
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Aug  8 13:38:02 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Aug  8 13:38:02 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: bonding
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: 8021ad
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: 8021q
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: macvlan
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: veth
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: bridge
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: Network device
Tue Aug  8 13:38:02 2023 user.notice : Added device handler type: tunnel
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.509070] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.517369] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.520614] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.533700] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.540833] br-lan: port 1(lan1) entered blocking state
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.546110] br-lan: port 1(lan1) entered disabled state
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.553487] device lan1 entered promiscuous mode
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.558182] device eth0 entered promiscuous mode
Tue Aug  8 13:38:04 2023 daemon.notice netifd: Interface 'lan' is enabled
Tue Aug  8 13:38:04 2023 daemon.notice netifd: Interface 'lan' is setting up now
Tue Aug  8 13:38:04 2023 daemon.notice netifd: Interface 'lan' is now up
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.585950] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.594400] br-lan: port 2(lan2) entered blocking state
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.599777] br-lan: port 2(lan2) entered disabled state
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.607218] device lan2 entered promiscuous mode
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.621352] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.630067] br-lan: port 3(lan3) entered blocking state
Tue Aug  8 13:38:04 2023 kern.info kernel: [ 3084.635321] br-lan: port 3(lan3) entered disabled state
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.642803] device lan3 entered promiscuous mode
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.656401] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.664740] br-lan: port 4(lan4) entered blocking state
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.670057] br-lan: port 4(lan4) entered disabled state
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.677384] device lan4 entered promiscuous mode
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Interface 'loopback' is enabled
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Interface 'loopback' is now up
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.695377] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [MediaTek MT7530 PHY] (irq=POLL)
Tue Aug  8 13:38:05 2023 kern.info kernel: [ 3084.704950] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link mode
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Interface 'wan' is enabled
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Interface 'wan6' is enabled
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Network device 'eth0' link is up
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Network device 'lo' link is up
Tue Aug  8 13:38:05 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Aug  8 13:38:05 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Aug  8 13:38:06 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy phy1-ap0) --> new PHY
Tue Aug  8 13:38:06 2023 kern.info kernel: [ 3086.527551] br-lan: port 5(phy1-ap0) entered blocking state
Tue Aug  8 13:38:06 2023 kern.info kernel: [ 3086.533296] br-lan: port 5(phy1-ap0) entered disabled state
Tue Aug  8 13:38:06 2023 kern.info kernel: [ 3086.539706] device phy1-ap0 entered promiscuous mode
Tue Aug  8 13:38:06 2023 kern.info kernel: [ 3086.545185] br-lan: port 5(phy1-ap0) entered blocking state
Tue Aug  8 13:38:06 2023 kern.info kernel: [ 3086.550908] br-lan: port 5(phy1-ap0) entered forwarding state
Tue Aug  8 13:38:06 2023 kern.info kernel: [ 3086.580201] br-lan: port 5(phy1-ap0) entered disabled state
Tue Aug  8 13:38:06 2023 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->HT_SCAN
Tue Aug  8 13:38:07 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy phy0-ap0) --> new PHY
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3086.915649] br-lan: port 6(phy0-ap0) entered blocking state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3086.921394] br-lan: port 6(phy0-ap0) entered disabled state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3086.927764] device phy0-ap0 entered promiscuous mode
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3086.933245] br-lan: port 6(phy0-ap0) entered blocking state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3086.938876] br-lan: port 6(phy0-ap0) entered forwarding state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3086.945128] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Aug  8 13:38:07 2023 daemon.notice netifd: bridge 'br-lan' link is up
Tue Aug  8 13:38:07 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.057124] mt7530-mdio mdio-bus:1f lan4: Link is Up - 1Gbps/Full - flow control off
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.065102] br-lan: port 4(lan4) entered blocking state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.070444] br-lan: port 4(lan4) entered forwarding state
Tue Aug  8 13:38:07 2023 daemon.notice netifd: Network device 'lan4' link is up
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.094935] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.315004] br-lan: port 7(phy0-ap1) entered blocking state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.320729] br-lan: port 7(phy0-ap1) entered disabled state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.327124] device phy0-ap1 entered promiscuous mode
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.336683] br-lan: port 7(phy0-ap1) entered blocking state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.342403] br-lan: port 7(phy0-ap1) entered forwarding state
Tue Aug  8 13:38:07 2023 kern.info kernel: [ 3087.451867] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap1: link becomes ready
Tue Aug  8 13:38:07 2023 daemon.notice hostapd: phy0-ap0: interface state UNINITIALIZED->ENABLED
Tue Aug  8 13:38:07 2023 daemon.notice hostapd: phy0-ap0: AP-ENABLED
Tue Aug  8 13:38:08 2023 kern.info kernel: [ 3087.730141] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
Tue Aug  8 13:38:08 2023 kern.info kernel: [ 3087.737282] br-lan: port 5(phy1-ap0) entered blocking state
Tue Aug  8 13:38:08 2023 kern.info kernel: [ 3087.743017] br-lan: port 5(phy1-ap0) entered forwarding state
Tue Aug  8 13:38:08 2023 daemon.notice hostapd: phy1-ap0: interface state HT_SCAN->ENABLED
Tue Aug  8 13:38:08 2023 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Tue Aug  8 13:38:08 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Tue Aug  8 13:38:08 2023 user.err : jail: can't read from child
Tue Aug  8 13:38:08 2023 user.err : jail: can't write to parent
Tue Aug  8 13:38:08 2023 kern.info kernel: [ 3087.859800] mtk_soc_eth 1e100000.ethernet wan: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Aug  8 13:38:08 2023 kern.info kernel: [ 3087.868232] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Network device 'wan' link is up
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Interface 'wan' is setting up now
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Interface 'wan6' has link connectivity
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Interface 'wan6' is setting up now
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Tue Aug  8 13:38:08 2023 daemon.notice netifd: Network device 'phy1-ap0' link is up
Tue Aug  8 13:38:08 2023 daemon.err odhcp6c[6245]: Failed to send RS (Address not available)
Tue Aug  8 13:38:08 2023 daemon.notice netifd: wan (6267): udhcpc: started, v1.36.1
Tue Aug  8 13:38:08 2023 daemon.notice netifd: wan (6267): udhcpc: broadcasting discover
Tue Aug  8 13:38:09 2023 daemon.notice netifd: Wireless device 'radio0' is now up
Tue Aug  8 13:38:09 2023 daemon.notice netifd: Network device 'phy0-ap0' link is up
Tue Aug  8 13:38:09 2023 daemon.notice netifd: Network device 'phy0-ap1' link is up
Tue Aug  8 13:38:09 2023 daemon.err odhcp6c[6245]: Failed to send SOLICIT message to ff02::1:2 (Address not available)
..
Tue Aug  8 13:38:13 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:38:14 2023 user.notice firewall: Reloading firewall due to ifup of wan6 (wan)
Tue Aug  8 13:38:14 2023 user.notice ddns-scripts[7012]: myddns_ipv4: PID '7012' started at 2023-08-08 13:38
Tue Aug  8 13:38:15 2023 user.warn ddns-scripts[7012]: myddns_ipv4: Service section disabled! - TERMINATE
Tue Aug  8 13:38:15 2023 user.warn ddns-scripts[7012]: myddns_ipv4: PID '7012' exit WITH ERROR '1' at 2023-08-08 13:38
Tue Aug  8 13:38:15 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:38:16 2023 user.notice ddns-scripts[7410]: myddns_ipv6: PID '7410' started at 2023-08-08 13:38
Tue Aug  8 13:38:16 2023 authpriv.info dropbear[7479]: Child connection from 192.168.1.2:4274
Tue Aug  8 13:38:16 2023 user.warn ddns-scripts[7410]: myddns_ipv6: Service section disabled! - TERMINATE
Tue Aug  8 13:38:16 2023 user.warn ddns-scripts[7410]: myddns_ipv6: PID '7410' exit WITH ERROR '1' at 2023-08-08 13:38
Tue Aug  8 13:38:17 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Aug  8 13:38:17 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Aug  8 13:38:17 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 4 names
Tue Aug  8 13:38:17 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Aug  8 13:38:22 2023 authpriv.info dropbear[7479]: Exit before auth from <192.168.1.2:4274>: Exited normally
Tue Aug  8 13:38:29 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:39:16 2023 daemon.info hostapd: phy1-ap0: STA 94:17:00:72:bd:e8 IEEE 802.11: authenticated
Tue Aug  8 13:39:16 2023 daemon.notice hostapd: phy1-ap0: STA-OPMODE-N_SS-CHANGED 94:17:00:72:bd:e8 2
Tue Aug  8 13:39:16 2023 daemon.info hostapd: phy1-ap0: STA 94:17:00:72:bd:e8 IEEE 802.11: associated (aid 1)
Tue Aug  8 13:39:16 2023 daemon.notice hostapd: phy1-ap0: AP-STA-CONNECTED 94:17:00:72:bd:e8 auth_alg=open
Tue Aug  8 13:39:16 2023 daemon.info hostapd: phy1-ap0: STA 94:17:00:72:bd:e8 WPA: pairwise key handshake completed (RSN)
Tue Aug  8 13:39:16 2023 daemon.notice hostapd: phy1-ap0: EAPOL-4WAY-HS-COMPLETED 94:17:00:72:bd:e8
Tue Aug  8 13:39:17 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.224 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.224 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.224 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.1.224 94:17:00:72:bd:e8
Tue Aug  8 13:39:19 2023 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.1.224 94:17:00:72:bd:e8
Tue Aug  8 13:40:49 2023 daemon.info hostapd: phy1-ap0: STA 50:5a:65:78:bc:df IEEE 802.11: authenticated
Tue Aug  8 13:40:49 2023 daemon.info hostapd: phy1-ap0: STA 50:5a:65:78:bc:df IEEE 802.11: associated (aid 2)
Tue Aug  8 13:40:49 2023 daemon.notice hostapd: phy1-ap0: AP-STA-CONNECTED 50:5a:65:78:bc:df auth_alg=open
Tue Aug  8 13:40:49 2023 daemon.info hostapd: phy1-ap0: STA 50:5a:65:78:bc:df WPA: pairwise key handshake completed (RSN)
Tue Aug  8 13:40:49 2023 daemon.notice hostapd: phy1-ap0: EAPOL-4WAY-HS-COMPLETED 50:5a:65:78:bc:df
Tue Aug  8 13:40:50 2023 daemon.warn odhcpd[1984]: No default route present, overriding ra_lifetime!
Tue Aug  8 13:40:55 2023 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 50:5a:65:78:bc:df
Tue Aug  8 13:40:55 2023 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.170 50:5a:65:78:bc:df
Tue Aug  8 13:40:56 2023 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.1.170 50:5a:65:78:bc:df
Tue Aug  8 13:40:56 2023 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.1.170 50:5a:65:78:bc:df steamdeck

na 5g te 500Mb/s wyciąga na steamdecku

2023-08-08 13:33:19

Cezary napisał/a:

Wróć do oryginalnego softu i sprawdź czy wifi w ogóle działa.

wgrałem 23.05 z luci i wifi normalnie jest, na gołym wrt nie ma.. albo mi się jakoś nie inicjalizuje ..

2023-08-08 12:41:54

lukasz92 napisał/a:

Cezary napisał/a:
Wg:https://github.com/openwrt/openwrt/commit/23be410b3d1267c752bf9f6e5c8f5a514dc562c4
Known issue:
MT7915 DBDC variant isn't supported yet.
EDIT: ale i tak masz coś mało. Wg openwrt nie ma np.
[    9.678412] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
[    9.683859] pci 0000:00:00.0: enabling device (0004 -> 0007)
[    9.689534] mt7915e_hif 0000:01:00.0: enabling device (0000 -> 0002)
[    9.695600] urngd: v1.0.2 started.
[    9.699749] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24
[    9.705236] pci 0000:00:01.0: enabling device (0004 -> 0007)
[    9.710924] mt7915e 0000:02:00.0: enabling device (0000 -> 0002)
[    9.839407] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20200819112315a
[    9.839407] 
[    9.839846] random: crng init done
[    9.852547] random: 7 urandom warning(s) missed due to ratelimiting
[   10.159988] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20200819112349
[   10.194193] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20200819112407
dbdc normalnie działa od dawna
Co do sprzętu mam jeden który wspiera 2.5G ethernet - https://www.gl-inet.com/products/gl-mt3000/ da się dorwać poniżej 400zł, dokupić by trzeba było modem LTE na USB.
Niedługo OpenWRT powinno dostać wsparcie dla tego modelu: https://www.gl-inet.com/products/gl-x3000/ - będzie 5G, ale będzie też drogo

jak działa to dlaczego nie działa na totolinku ? ;D

2023-08-07 10:51:43

w tej wersji na totolinku X5000R nie ma wifi, brak sekcji w config oraz brak reakcji na "wifi".

[    0.000000] Linux version 5.15.120 (cezary@eko.one.pl) (mipsel-openwrt-linux-                                                                                                                                   musl-gcc (OpenWrt GCC 12.3.0 r23004-7f0db09513) 12.3.0, GNU ld (GNU Binutils) 2.                                                                                                                                   40.0) #0 SMP Thu Jul 27 11:54:55 2023
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is TOTOLINK X5000R
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt                                                                                                                                   es
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] percpu: Embedded 11 pages/cpu s14736 r8192 d22128 u45056
[    0.000000] pcpu-alloc: s14736 r8192 d22128 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,j                                                                                                                                   ffs2
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, l                                                                                                                                   inear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, lin                                                                                                                                   ear)
[    0.000000] Writing ErrCtl register=0003034c
[    0.000000] Readback ErrCtl register=0003034c
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 246628K/262144K available (7292K kernel code, 623K rwdata                                                                                                                                   , 880K rodata, 3736K init, 226K bss, 15516K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif                                                                                                                                   fies.
[    0.000000] NR_IRQS: 256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478ab                                                                                                                                   b4, max_idle_ns: 440795247997 ns
[    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 43980                                                                                                                                   46511103ns
[    0.008042] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.066221] pid_max: default: 32768 minimum: 301
[    0.071683] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea                                                                                                                                   r)
[    0.078895] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,                                                                                                                                    linear)
[    0.090515] rcu: Hierarchical SRCU implementation.
[    0.095993] smp: Bringing up secondary CPUs ...
[    0.101447] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.101473] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt                                                                                                                                   es
[    0.101487] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.101532] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.160772] Synchronize counters for CPU 1: done.
[    0.193311] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.193332] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt                                                                                                                                   es
[    0.193344] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.193372] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.252275] Synchronize counters for CPU 2: done.
[    0.282911] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.282932] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt                                                                                                                                   es
[    0.282943] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.282975] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.337461] Synchronize counters for CPU 3: done.
[    0.367320] smp: Brought up 1 node, 4 CPUs
[    0.376471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                                                                   x_idle_ns: 19112604462750000 ns
[    0.386273] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.393377] pinctrl core: initialized pinctrl subsystem
[    0.400209] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.406825] thermal_sys: Registered thermal governor 'step_wise'
[    0.412818] FPU Affinity set after 11720 emulations
[    0.431519] clocksource: Switched to clocksource GIC
[    0.437801] NET: Registered PF_INET protocol family
[    0.442911] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear                                                                                                                                   )
[    0.451087] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144                                                                                                                                    bytes, linear)
[    0.459399] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,                                                                                                                                    linear)
[    0.467071] TCP established hash table entries: 2048 (order: 1, 8192 bytes, l                                                                                                                                   inear)
[    0.474718] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.481846] TCP: Hash tables configured (established 2048 bind 2048)
[    0.488290] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.494795] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.502126] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.507734] PCI: CLS 0 bytes, default 32
[    0.523290] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.538050] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.543957] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT                                                                                                                                   Y) (c) 2001-2006 Red Hat, Inc.
[    0.555578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                                                                   51)
[    1.010995] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.017130] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.023362] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.029592] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[    1.036374] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000                                                                                                                                   , using [bus 00-ff]
[    1.045271] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff ->                                                                                                                                    0x0060000000
[    1.053477] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff ->                                                                                                                                    0x0000000000
[    1.421533] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    1.428435] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    1.433314] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    1.438132] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    1.445472] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    1.451794] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.457235] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.464128] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.470312] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.476332] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.482623] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.488933] pci 0000:00:00.0: supports D1
[    1.492922] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.499713] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.505812] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.512103] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.518436] pci 0000:00:01.0: supports D1
[    1.522467] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.530632] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), rec                                                                                                                                   onfiguring
[    1.538657] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), rec                                                                                                                                   onfiguring
[    1.546957] pci 0000:01:00.0: [14c3:7916] type 00 class 0x000280
[    1.552962] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref                                                                                                                                   ]
[    1.560116] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref                                                                                                                                   ]
[    1.567317] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref                                                                                                                                   ]
[    1.574625] pci 0000:01:00.0: supports D1 D2
[    1.578811] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.585454] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by                                                                                                                                    2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe                                                                                                                                    x1 link)
[    1.602341] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.607503] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.613580] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.620285] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref                                                                                                                                   ]
[    1.627486] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.634406] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280
[    1.640364] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref                                                                                                                                   ]
[    1.647566] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref                                                                                                                                   ]
[    1.654743] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref                                                                                                                                   ]
[    1.662041] pci 0000:02:00.0: supports D1 D2
[    1.666226] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.672861] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by                                                                                                                                    2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe                                                                                                                                    x1 link)
[    1.689709] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    1.694932] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    1.700940] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.707712] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref                                                                                                                                   ]
[    1.714882] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.721504] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.728028] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.734972] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    1.741531] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.748423] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    1.755203] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x602fffff pref                                                                                                                                   ]
[    1.762369] pci 0000:00:01.0: BAR 8: assigned [mem 0x60300000-0x603fffff]
[    1.769076] pci 0000:00:01.0: BAR 9: assigned [mem 0x60400000-0x605fffff pref                                                                                                                                   ]
[    1.776276] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
[    1.783030] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
[    1.789733] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff]
[    1.795810] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
[    1.801868] pci 0000:01:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bi                                                                                                                                   t pref]
[    1.809534] pci 0000:01:00.0: BAR 2: assigned [mem 0x60200000-0x60203fff 64bi                                                                                                                                   t pref]
[    1.817267] pci 0000:01:00.0: BAR 4: assigned [mem 0x60204000-0x60204fff 64bi                                                                                                                                   t pref]
[    1.824965] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.829844] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.835922] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.842660] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x602fffff pref                                                                                                                                   ]
[    1.849814] pci 0000:02:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bi                                                                                                                                   t pref]
[    1.857537] pci 0000:02:00.0: BAR 2: assigned [mem 0x60500000-0x60503fff 64bi                                                                                                                                   t pref]
[    1.865230] pci 0000:02:00.0: BAR 4: assigned [mem 0x60504000-0x60504fff 64bi                                                                                                                                   t pref]
[    1.872937] pci 0000:00:01.0: PCI bridge to [bus 02]
[    1.877815] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    1.883897] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff]
[    1.890602] pci 0000:00:01.0:   bridge window [mem 0x60400000-0x605fffff pref                                                                                                                                   ]
[    1.900058] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    1.910295] printk: console [ttyS0] disabled
[    1.914686] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud                                                                                                                                    = 3125000) is a 16550A
[    1.923711] printk: console [ttyS0] enabled
[    1.932009] printk: bootconsole [early0] disabled
[    2.183070] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    2.189940] spi-nor spi0.0: en25qh128 (16384 Kbytes)
[    2.195185] 4 fixed-partitions partitions found on MTD device spi0.0
[    2.201664] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitio                                                                                                                                   ns
[    2.209013] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitio                                                                                                                                   ns
[    2.216980] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitio                                                                                                                                   ns
[    2.224397] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitio                                                                                                                                   ns
[    2.232022] Creating 4 MTD partitions on "spi0.0":
[    2.236827] 0x000000000000-0x000000030000 : "u-boot"
[    2.242955] 0x000000030000-0x000000040000 : "u-boot-env"
[    2.249174] 0x000000040000-0x000000050000 : "factory"
[    2.255331] 0x000000050000-0x000001000000 : "firmware"
[    2.394550] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    4.433750] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe                                                                                                                                   100000, irq 21
[    4.445956] mtk_soc_eth 1e100000.ethernet wan: mediatek frame engine at 0xbe1                                                                                                                                   00000, irq 21
[    4.455752] i2c_dev: i2c /dev entries driver
[    4.462630] NET: Registered PF_INET6 protocol family
[    4.471278] Segment Routing with IPv6
[    4.475126] In-situ OAM (IOAM) with IPv6
[    4.479136] NET: Registered PF_PACKET protocol family
[    4.484403] bridge: filtering via arp/ip/ip6tables is no longer available by                                                                                                                                    default. Update your scripts to load br_netfilter if you need this.
[    4.497960] 8021q: 802.1Q VLAN Support v1.8
[    4.508290] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    4.583419] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
[    4.591127] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control r                                                                                                                                   x/tx
[    4.592341] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] d                                                                                                                                   river [MediaTek MT7530 PHY] (irq=23)
[    4.611775] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] d                                                                                                                                   river [MediaTek MT7530 PHY] (irq=24)
[    4.624823] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] d                                                                                                                                   river [MediaTek MT7530 PHY] (irq=25)
[    4.637835] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] d                                                                                                                                   river [MediaTek MT7530 PHY] (irq=26)
[    4.650444] DSA: tree 0 setup
[    4.668354] Freeing unused kernel image (initmem) memory: 3736K
[    4.674389] This architecture does not have kernel memory protection.
[    4.680822] Run /init as init process
[    4.684535]   with arguments:
[    4.684548]     /init
[    4.684556]   with environment:
[    4.684564]     HOME=/
[    4.684572]     TERM=linux
[    5.060196] init: Console is alive
[    5.064742] init: - watchdog -
[    5.078598] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.093306] kmodloader: done loading kernel modules from /etc/modules-boot.d/                                                                                                                                   *
[    5.109445] init: - preinit -
[    5.306353] random: jshn: uninitialized urandom read (4 bytes read)
[    5.384787] random: jshn: uninitialized urandom read (4 bytes read)
[    5.424141] random: jshn: uninitialized urandom read (4 bytes read)
[    5.699537] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii l                                                                                                                                   ink mode
[    5.712390] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flo                                                                                                                                   w control rx/tx
[    5.721182] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[    5.729004] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.867672] procd: - early -
[    7.870788] procd: - watchdog -
[    8.429432] procd: - watchdog -
[    8.433068] procd: - ubus -
[    8.443387] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.486879] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.493817] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.503881] procd: - init -
[    8.849590] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.908954] PPP generic driver version 2.4.2
[    8.915068] NET: Registered PF_PPPOX protocol family
[    8.927684] kmodloader: done loading kernel modules from /etc/modules.d/*
[    9.061520] urngd: v1.0.2 started.
[    9.236167] random: crng init done
[    9.239564] random: 31 urandom warning(s) missed due to ratelimiting
[   56.858556] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   56.887428] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii l                                                                                                                                   ink mode
[   56.895740] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flo                                                                                                                                   w control rx/tx
[   56.908711] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[   56.918428] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   56.926993] br-lan: port 1(lan1) entered blocking state
[   56.932438] br-lan: port 1(lan1) entered disabled state
[   56.940288] device lan1 entered promiscuous mode
[   56.945098] device eth0 entered promiscuous mode
[   56.982331] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[   56.991015] br-lan: port 2(lan2) entered blocking state
[   56.996551] br-lan: port 2(lan2) entered disabled state
[   57.003956] device lan2 entered promiscuous mode
[   57.020949] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[   57.029712] br-lan: port 3(lan3) entered blocking state
[   57.035072] br-lan: port 3(lan3) entered disabled state
[   57.042694] device lan3 entered promiscuous mode
[   57.057163] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[   57.065591] br-lan: port 4(lan4) entered blocking state
[   57.070839] br-lan: port 4(lan4) entered disabled state
[   57.078597] device lan4 entered promiscuous mode
[   57.110742] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [Medi                                                                                                                                   aTek MT7530 PHY] (irq=POLL)
[   57.120410] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link                                                                                                                                    mode
[   59.823252] mt7530-mdio mdio-bus:1f lan4: Link is Up - 1Gbps/Full - flow cont                                                                                                                                   rol off
[   59.831056] br-lan: port 4(lan4) entered blocking state
[   59.836330] br-lan: port 4(lan4) entered forwarding state
[   59.843385] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   60.271735] mtk_soc_eth 1e100000.ethernet wan: Link is Up - 1Gbps/Full - flow                                                                                                                                    control rx/tx
[   60.280130] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready

2023-07-23 21:03:01

a masz tam w ogóle 5V ?

2023-07-03 11:50:46

1. nie potrzebuje tyle miejsca, i jak bym wymieniał to i tak na inny, ten się nie opłaca. Wiec i tak musiałbym korygować layout.
https://www.tme.eu/pl/details/mx30lf1g1 … c-ti-tray/

2. na tym routerze od początku pod openwrt są problemy z kontrolerem nand - takie problemy z uszkodzonymi blokami powinny się korygować same a nie rozwalać system plików. Wymiana na nową kość nic nie zmieni.
3. chce wymienić na spi w 7 egzemplarzach, żeby pozbyć się problemów na dobre i móc ich normalnie użyć na "produkcji", bez strachu że za pół roku znowu się posypie ... Obecnie te routery są dla mnie bezużyteczne.
4. Chciałem spróbować czy sie da, i przy okazji się czegoś nauczyć ;D

jednego i tak pewnie poświęcę dla eksperymentów, na PCB jest wyprowadzone sporo gpio, nawet pcie.

Miałem się tym dalej zająć w weekend, ale nie było czasu :>

2023-06-30 19:31:27

Stary NAND odczytałem w czytniku, miał 657 uszkodzonych bloków.

binwalk -e MX30LF1G18AC@TSOP48.BIN

DECIMAL       HEXADECIMAL     DESCRIPTION
--------------------------------------------------------------------------------
0             0x0             uImage header, header size: 64 bytes, header CRC: 0xEBCCB4B4, created: 2015-09-25 14:29:54, image size: 133648 bytes, Data Address: 0xA0200000, Entry Point: 0xA0200000, data CRC: 0xE36D1B47, OS: Linux, CPU: MIPS, image type: Standalone Program, compression type: none, image name: "NAND Flash I"
112104        0x1B5E8         U-Boot version string, "U-Boot 1.1.3 (Sep 25 2015 - 10:29:47)"
270250        0x41FAA         Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x50, starting code segment: 0x0, code size: 0x7300
2162688       0x210000        uImage header, header size: 64 bytes, header CRC: 0xE4A0869B, created: 2021-07-29 04:21:28, image size: 2444390 bytes, Data Address: 0x80001000, Entry Point: 0x80001000, data CRC: 0xF44CAF37, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: none, image name: "MIPS X-WRT Linux-5.4.134"
2168332       0x21160C        Copyright string: "Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>"

WARNING: Extractor.execute failed to run external extractor 'ubireader_extract_files -o 'ubifs-root' '%e'': [Errno 2] No such file or directory: 'ubireader_extract_files', 'ubireader_extract_files -o 'ubifs-root' '%e'' might not be installed correctly
6488064       0x630000        UBI erase count header, version: 1, EC: 0x1, VID header offset: 0x800, data offset: 0x1000
38928384      0x2520000       Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x38, starting code segment: 0x0, code size: 0x7300
38928512      0x2520080       Zip archive data, at least v2.0 to extract, compressed size: 25033, uncompressed size: 156925, name: ui.xml
38954386      0x2526592       Zip archive data, at least v2.0 to extract, compressed size: 14039, uncompressed size: 85312, name: msg.xml
38968915      0x2529E53       Zip archive data, at least v2.0 to extract, compressed size: 51390, uncompressed size: 229831, name: hlp.js
39022174      0x2536E5E       End of Zip archive, footer length: 22
41091072      0x2730000       Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x38, starting code segment: 0x0, code size: 0x7300
41091200      0x2730080       Zip archive data, at least v2.0 to extract, compressed size: 24545, uncompressed size: 160540, name: ui.xml
41116570      0x273639A       Zip archive data, at least v2.0 to extract, compressed size: 13863, uncompressed size: 87931, name: msg.xml
41130923      0x2739BAB       Zip archive data, at least v2.0 to extract, compressed size: 51206, uncompressed size: 222300, name: hlp.js
43253760      0x2940000       Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x38, starting code segment: 0x0, code size: 0x7300
43253888      0x2940080       Zip archive data, at least v2.0 to extract, compressed size: 23293, uncompressed size: 155641, name: ui.xml
43277958      0x2945E86       Zip archive data, at least v2.0 to extract, compressed size: 13132, uncompressed size: 84206, name: msg.xml
43291564      0x29493AC       Zip archive data, at least v2.0 to extract, compressed size: 49396, uncompressed size: 212810, name: hlp.js
43342765      0x2955BAD       End of Zip archive, footer length: 22
45416448      0x2B50000       Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x64, starting code segment: 0x0, code size: 0x7300
45416576      0x2B50080       Zip archive data, at least v2.0 to extract, compressed size: 23158, uncompressed size: 154016, name: ui.xml
45440511      0x2B55DFF       Zip archive data, at least v2.0 to extract, compressed size: 12975, uncompressed size: 82672, name: msg.xml
45453960      0x2B59288       Zip archive data, at least v2.0 to extract, compressed size: 48387, uncompressed size: 204492, name: hlp.js
45504120      0x2B65678       End of Zip archive, footer length: 22
47579136      0x2D60000       Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x38, starting code segment: 0x0, code size: 0x7300
47579264      0x2D60080       Zip archive data, at least v2.0 to extract, compressed size: 32248, uncompressed size: 214147, name: ui.xml
47612577      0x2D682A1       Zip archive data, at least v2.0 to extract, compressed size: 15888, uncompressed size: 102428, name: msg.xml
47629019      0x2D6C2DB       Zip archive data, at least v2.0 to extract, compressed size: 61937, uncompressed size: 350912, name: hlp.js
47693145      0x2D7BD59       End of Zip archive, footer length: 22
64880640      0x3DE0000       Sercomm firmware signature, version control: 256, download control: 0, hardware ID: "AYA", hardware version: 0x4100, firmware version: 0x86, starting code segment: 0x0, code size: 0x7300
64880768      0x3DE0080       Zip archive data, at least v2.0 to extract, compressed size: 28140, uncompressed size: 169074, name: ui.xml
64909845      0x3DE7215       Zip archive data, at least v2.0 to extract, compressed size: 13945, uncompressed size: 87210, name: msg.xml
64924280      0x3DEAA78       Zip archive data, at least v2.0 to extract, compressed size: 53082, uncompressed size: 216721, name: hlp.js
64979279      0x3DF814F       End of Zip archive, footer length: 22
69206067      0x4200033       Sercomm firmware signature, version control: 19280, download control: 1027, hardware ID: "", hardware version: 0x9, firmware version: 0x100, starting code segment: 0x4, code size: 0x0
69206074      0x420003A       Zip archive data, at least v1.0 to extract, name: keys/
69206137      0x4200079       Zip archive data, at least v2.0 to extract, compressed size: 206, uncompressed size: 245, name: keys/dh1024.pem
69206416      0x4200190       Zip archive data, at least v1.0 to extract, compressed size: 21, uncompressed size: 21, name: keys/index.txt.attr
69206632      0x4200268       Zip archive data, at least v2.0 to extract, compressed size: 110, uncompressed size: 220, name: keys/index.txt
69206814      0x420031E       Zip archive data, at least v2.0 to extract, compressed size: 95, uncompressed size: 110, name: keys/index.txt.old
69206985      0x42003C9       Zip archive data, at least v1.0 to extract, compressed size: 3, uncompressed size: 3, name: keys/serial
69207073      0x4200421       Zip archive data, at least v1.0 to extract, compressed size: 3, uncompressed size: 3, name: keys/serial.old
69207149      0x420046D       Zip archive data, at least v2.0 to extract, compressed size: 1980, uncompressed size: 3806, name: keys/02.pem
69209262      0x4200CAE       Zip archive data, at least v2.0 to extract, compressed size: 1980, uncompressed size: 3806, name: keys/client.crt
69211379      0x42014F3       Zip archive data, at least v2.0 to extract, compressed size: 518, uncompressed size: 688, name: keys/client.csr
69211986      0x4201752       Zip archive data, at least v2.0 to extract, compressed size: 718, uncompressed size: 916, name: keys/client.key
69212793      0x4201A79       Zip archive data, at least v2.0 to extract, compressed size: 1958, uncompressed size: 3928, name: keys/01.pem
69214884      0x42022A4       Zip archive data, at least v2.0 to extract, compressed size: 1958, uncompressed size: 3928, name: keys/server.crt
69216979      0x4202AD3       Zip archive data, at least v2.0 to extract, compressed size: 517, uncompressed size: 688, name: keys/server.csr
69218404      0x4203064       Zip archive data, at least v2.0 to extract, compressed size: 756, uncompressed size: 1265, name: keys/ca.crt
69219261      0x42033BD       Zip archive data, at least v2.0 to extract, compressed size: 714, uncompressed size: 912, name: keys/ca.key
69221622      0x4203CF6       End of Zip archive, footer length: 22

aczkolwiek chyba szybciej jak sobie skopiuje z innego r6220 aniżeli wygrzebie z tego ...

2023-06-30 19:14:53

Cześć, jak już kiedyś wspominałem - wiaderko z popsutymi r6220 mi rośnie i rośnie, wszystkiego powodem jest zdychający po pewnym czasie flash.
Przy okazji posprzątania stanowiska z hotair - postanowiłem w jednym wymienić go na SPI i sprawdzić co się stanie ;D
Egzemplarz ten już nawet nie dawał się postawić nmrpflashem.
[spoiler]

[   33.506653] SQUASHFS error: xz decompression failed, data probably corrupt
[   33.520398] SQUASHFS error: squashfs_read_data failed to read block 0xa363a2
[   33.534586] SQUASHFS error: Unable to read fragment cache entry [a363a2]
[   33.548012] SQUASHFS error: Unable to read page, block a363a2, size 1419c
[   33.561311] SQUASHFS error: xz decompression failed, data probably corrupt
[   33.561590] SQUASHFS error: Unable to read fragment cache entry [a363a2]
[   33.575208] SQUASHFS error: squashfs_read_data failed to read block 0x55f06e
[   33.588554] SQUASHFS error: Unable to read page, block a363a2, size 1419c
[   33.602613] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[   33.629527] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
[   33.646763] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[   33.660223] SQUASHFS error: Unable to read page, block 55f06e, size 9f18

===================================================================
                MT7621   stage1 code 13:15:05 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL3 FB_DL: 0x5, 1/0 = 549/475 15000000
PLL4 FB_DL: 0x10, 1/0 = 528/496 41000000
PLL2 FB_DL: 0x15, 1/0 = 548/476 55000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0
===================================================================
                MT7621   stage1 code 13:15:05 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL3 FB_DL: 0x6, 1/0 = 738/286 19000000
PLL4 FB_DL: 0x10, 1/0 = 573/451 41000000
PLL2 FB_DL: 0x15, 1/0 = 558/466 55000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000E:|    0    0    0    0    0    0    0    0    0    0    1    1    1    1    1    1
000F:|    0    0    0    0    0    1    1    1    1    1    1    1    1    1    0    0
0010:|    1    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0
0011:|    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 16
rank 0 fine = 32
B:|    0    0    0    0    0    0    0    0    0    0    1    1    1    0    0    0
opt_dle value:11
DRAMC_R0DELDLY[018]=00001E1F
==================================================================
                RX      DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    13 9 13 9 13 6 13 6 3 11
10 |    5 11 7 11 6 10
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =31 DQS1 = 30
==================================================================
bit     DQS0     bit      DQS1
0  (1~60)30  8  (1~56)28
1  (1~58)29  9  (1~58)29
2  (1~60)30  10  (1~58)29
3  (1~58)29  11  (1~55)28
4  (1~58)29  12  (1~58)29
5  (1~60)30  13  (1~58)29
6  (1~60)30  14  (1~59)30
7  (1~61)31  15  (1~57)29
==================================================================
3.dq delay value last
==================================================================
bit|    0  1  2  3  4  5  6  7  8   9
--------------------------------------
0 |    14 11 14 11 15 7 14 6 5 12
10 |    6 13 8 12 6 11
==================================================================
==================================================================
     TX  perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2
DQ loop=15, cmp_err_1 = ffff05aa
DQ loop=14, cmp_err_1 = ffff01aa
DQ loop=13, cmp_err_1 = ffff00a2
dqs_perbyte_dly.last_dqdly_pass[1]=13,  finish count=1
DQ loop=12, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=12,  finish count=2
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(9,8)
20,data:99
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done
                CPU=50000000 HZ BUS=16666666 HZ
===================================================================


U-Boot 1.1.3 (Sep 25 2015 - 10:29:47)

Board: Ralink APSoC DRAM:  128 MB
relocate_code Pointer at: 87fac000

Config XHCI 40M PLL
Allocate 16 byte aligned buffer: 87fe1bb0
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 F1 80 95 02]
Device found in MTK table, ID: c2f1, EXT_ID: 809502
Support this Device in MTK table! c2f1
select_chip
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Signature matched and data read!
load_fact_bbt success 1023
load fact bbt success
[mtk_nand] probe successfully!
mtd->writesize=2048 mtd->oobsize=64,    mtd->erasesize=131072  devinfo.iowidth=8
Env addr : 0x100000
.*** Warning - bad CRC, using default environment

============================================
Ralink UBoot Version: 4.2.1.0
--------------------------------------------
ASIC MT7621AS (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection
DRAM_TYPE: DDR3
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: NAND Flash
Date:Sep 25 2015  Time:10:29:47
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 880 MHZ ####
 estimate memory size =128 Mbytes

Reset switch ...
#Reset_MT7530
set LAN/WAN LLLLW
..Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, cmd
1, 0x0000000D
cmd : 0x0000000D


Press Ctrl+C to Enter the Main loop...
Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, cmd
1, 0x0000000F
cmd : 0x0000000F
Enter NMRP_main
Flash Sector Number : 1024.
Bad block detected at 0x3c20000, oob_buf[0] is 0x0
NAND Section 18, has bad block at address c3820000, Image Offset 3c20000
NAND Section 18, has bad block count 1
Bad block detected at 0x6e00000, oob_buf[0] is 0x0
NAND Section 21, has bad block at address c6a00000, Image Offset 6e00000
NAND Section 21, has bad block count 1

 NetTxPacket = 0x87FE5B40

 KSEG1ADDR(NetTxPacket) = 0xA7FE5B40

 NetLoop,call eth_halt !

 NetLoop,call eth_init !
Trying Eth0 (10/100-M)

 Waitting for RX_DMA_BUSY status Start... done


 ETH_STATE_ACTIVE!!
NMRP_FLASH_SIZE_buffer --> a1000000.
NMRP:LISTENING
### No NMRP Server found ###

 KSEG1ADDR(NetTxPacket) = 0xA7FE5B40

 NetLoop,call eth_halt !

 NetLoop,call eth_init !
Trying Eth0 (10/100-M)

 ETH_STATE_ACTIVE!!
STANDALONE_LOAD_ADDR is 0xa0600000
Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, boot
Flash Sector Number : 1024.
Bad block detected at 0x3c20000, oob_buf[0] is 0x0
NAND Section 18, has bad block at address c3820000, Image Offset 3c20000
NAND Section 18, has bad block count 1
Bad block detected at 0x6e00000, oob_buf[0] is 0x0
NAND Section 21, has bad block at address c6a00000, Image Offset 6e00000
NAND Section 21, has bad block count 1

***************************************************
    Sercomm Boot Version 1.19.0

***************************************************
Upgrade flag check pass!Entering Firmware : Everything is OK.
kernel addr :0xbfe00000

 System Boot system code via Flash.
## Booting image at bfe00000 ...
   Image Name:   MIPS X-WRT Linux-5.4.134
   Image Type:   MIPS Linux Kernel Image (uncompressed)
   Data Size:    2444390 Bytes =  2.3 MB
   Load Address: 80001000
   Entry Point:  80001000
......................................   Verifying Checksum ... OK
OK



commandline in boot is : <NULL>  !!!!



No initrd
## Transferring control to Linux (at address 80001000) ...
## Giving linux memsize in MB, 128

Starting kernel ...



OpenWrt kernel loader for MIPS based SoC
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Decompressing kernel... done!
Starting kernel at 80001000...

[    0.000000] Linux version 5.4.134 (ptpt52@SC-GAME) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r17137+1-81482e9286)) #0 SMP Thu Jul 29 04:21:28 2021
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Netgear R6220
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2} total 2
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] percpu: Embedded 14 pages/cpu s26224 r8192 d22928 u57344
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=000734ec
[    0.000000] Readback ErrCtl register=000734ec
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 120376K/131072K available (5851K kernel code, 229K rwdata, 1272K rodata, 1272K init, 232K bss, 10696K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x364/0x54c with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015487] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.087785] pid_max: default: 32768 minimum: 301
[    0.097071] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.111471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.128758] rcu: Hierarchical SRCU implementation.
[    0.138605] smp: Bringing up secondary CPUs ...
[    8.304447] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    8.304455] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    8.304467] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    8.304564] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.198349] Synchronize counters for CPU 1: done.
[    0.257983] smp: Brought up 1 node, 2 CPUs
[    0.266582] devtmpfs: initialized
[    0.276823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.296268] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.309861] pinctrl core: initialized pinctrl subsystem
[    0.321534] NET: Registered protocol family 16
[    0.344054] pstore: Registered ramoops as persistent store backend
[    0.356275] ramoops: using 0x80000@0x3f00000, ecc: 0
[    0.385853] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.406765] clocksource: Switched to clocksource GIC
[    0.420287] thermal_sys: Registered thermal governor 'step_wise'
[    0.420752] NET: Registered protocol family 2
[    0.441365] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.456121] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.472622] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.487820] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.501807] TCP: Hash tables configured (established 1024 bind 1024)
[    0.514527] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.527410] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.541451] NET: Registered protocol family 1
[    0.550007] PCI: CLS 0 bytes, default 32
[    0.796720] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    0.808166] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.832170] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.843703] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.866585] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.878208] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.889646] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.901858] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.916403] printk: console [ttyS0] disabled
[    0.924919] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 15, base_baud = 3125000) is a 16550A
[    0.942817] printk: console [ttyS0] enabled
[    0.942817] printk: console [ttyS0] enabled
[    0.959365] printk: bootconsole [early0] disabled
[    0.959365] printk: bootconsole [early0] disabled
[    0.980151] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[    0.994994] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    1.007644] nand: Macronix MX30LF1G18AC
[    1.015262] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.030338] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    1.043372] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    1.057926] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[    1.072479] Scanning device for bad blocks
[    1.688412] Bad eraseblock 481 at 0x000003c20000
[    2.200670] Bad eraseblock 880 at 0x000006e00000
[    2.390423] 6 fixed-partitions partitions found on MTD device mt7621-nand
[    2.403931] Creating 6 MTD partitions on "mt7621-nand":
[    2.414343] 0x000000000000-0x000000100000 : "u-boot"
[    2.425888] 0x000000100000-0x000000200000 : "SC PID"
[    2.437509] 0x000000200000-0x000000600000 : "kernel"
[    2.449219] 0x000000600000-0x000002200000 : "ubi"
[    2.460467] 0x000002e00000-0x000002f00000 : "factory"
[    2.472180] 0x000004200000-0x000007e00000 : "reserved"
[    2.485755] libphy: Fixed MDIO Bus: probed
[    2.560646] libphy: mdio: probed
[    3.968886] ralink_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    3.988778] ralink_soc_eth 1e100000.ethernet: PPE started
[    4.000439] ralink_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 17
[    4.019963] mt7621-pci 1e140000.pcie: Parsing DT failed
[    4.030437] random: fast init done
[    4.033075] NET: Registered protocol family 10
[    4.047937] Segment Routing with IPv6
[    4.055316] NET: Registered protocol family 17
[    4.064296] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.090380] 8021q: 802.1Q VLAN Support v1.8
[    4.102215] pstore: Using crash dump compression: deflate
[    4.114484] rt2880-pinmux pinctrl: pcie is already enabled
[    4.125584] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    4.140524] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    4.255269] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    4.266375] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    4.377400] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
[    4.391264] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    4.400969] mt7621-pci 1e140000.pcie: PCIE2 enabled
[    4.410686] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    4.429397] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    4.442067] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    4.455759] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    4.469452] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.480407] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    4.492397] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    4.504873] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    4.517421] pci 0000:00:00.0: supports D1
[    4.525388] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    4.537259] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    4.549254] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    4.561736] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    4.574277] pci 0000:00:01.0: supports D1
[    4.582255] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    4.595176] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    4.611133] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    4.627284] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    4.639308] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    4.652864] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    4.666305] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    4.679929] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    4.690347] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    4.702480] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    4.715998] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    4.730386] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    4.743768] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[    4.755775] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    4.768396] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    4.782016] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    4.792433] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    4.804566] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    4.818085] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    4.832469] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    4.845687] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    4.858856] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    4.872719] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    4.885882] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    4.899746] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    4.913264] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    4.927650] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    4.941169] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    4.955550] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    4.969078] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    4.982592] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    4.996109] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    5.009638] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    5.024197] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    5.038583] pci 0000:00:00.0: PCI bridge to [bus 01]
[    5.048470] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    5.061981] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    5.075495] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    5.089886] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[    5.103399] pci 0000:00:01.0: PCI bridge to [bus 02]
[    5.113285] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    5.126804] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    5.140319] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    5.156185] UBI: auto-attach mtd3
[    5.162891] ubi0: attaching mtd3
[    5.452718] ubi0: scanning is finished
[    5.476689] ubi0: attached mtd3 (name "ubi", size 28 MiB)
[    5.487524] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.501218] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.514727] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.528589] ubi0: good PEBs: 224, bad PEBs: 0, corrupted PEBs: 0
[    5.540550] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    5.554932] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1627532488
[    5.573115] ubi0: available PEBs: 0, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20
[    5.591494] ubi0: background thread "ubi_bgt0d" started, PID 436
[    5.605174] block ubiblock0_0: created from ubi0:0(rootfs)
[    5.616127] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    5.629998] hctosys: unable to open rtc device (rtc0)
[    5.647585] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[    5.666045] devtmpfs: mounted
[    5.676269] Freeing unused kernel memory: 1272K
[    5.685321] This architecture does not have kernel memory protection.
[    5.698142] Run /sbin/init as init process
[    6.268239] init: Console is alive
[    6.275230] init: - watchdog -
[    7.508221] SQUASHFS error: xz decompression failed, data probably corrupt
[    7.521933] SQUASHFS error: squashfs_read_data failed to read block 0x20eb56
[    7.535975] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.549323] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.562711] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.576051] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.589417] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.602758] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.616115] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.629462] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.642817] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.656158] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.669529] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.682870] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.696251] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.709599] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.722959] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.736299] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.749661] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.763002] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.776365] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.789712] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.803069] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.816410] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.829774] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.843116] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.856473] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.869825] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.883183] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.896523] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.909890] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.923232] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.936603] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[    7.949949] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[    7.967169] init: - preinit -
[    8.906066] random: jshn: uninitialized urandom read (4 bytes read)
[    8.975609] random: jshn: uninitialized urandom read (4 bytes read)
[   33.506653] SQUASHFS error: xz de[    9.128270] random: jshn: uninitialized urandom read (4 bytes read)
co[    9.141658] ttyS ttyS0: 1 input overrun(s)
mpression failed, datad_data failed to read b6] SQUASHFS error: Unable to read fragment cache entry [a363a2]
[   33.548012] SQUASHFS error: Unable to read page, block a363a2, size 1419c
[   33.561311] SQUASHFS error: xz decompression failed, data probably corrupt
[   33.561590] SQUASHFS error: Unable to read fragment cache entry [a363a2]
[   33.575208] SQUASHFS error: squashfs_read_data failed to read block 0x55f06e
[   33.588554] SQUASHFS error: Unable to read page, block a363a2, size 1419c
[   33.602613] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[   33.629527] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
[   33.646763] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[   33.660223] SQUASHFS error: Unable to read page, block 55f06e, size 9f18

===================================================================
                MT7621   stage1 code 13:15:05 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL3 FB_DL: 0x5, 1/0 = 549/475 15000000
PLL4 FB_DL: 0x10, 1/0 = 528/496 41000000
PLL2 FB_DL: 0x15, 1/0 = 548/476 55000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    [    9.587536] SQUASHFS error: xz decompression failed, data probably corrupt

000B:|    0
==[    9.603495] SQUASHFS error: squashfs_read_data failed to read block 0x55f06e
================[    9.620306] SQUASHFS error: Unable to read fragment cache entry [55f06e]
================[    9.636434] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
=========[    9.652604] SQUASHFS error: Unable to read fragment cache entry [55f06e]
================[    9.667535] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
======PU=5000000[    9.683681] SQUASHFS error: Unable to read fragment cache entry [55f06e]
0 HZ BUS=1666
C[    9.699788] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
hange MPLL sourc[    9.715923] SQUASHFS error: Unable to read fragment cache entry [55f06e]
e frode + Extern[    9.732030] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
al loopback
0[    9.748195] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[    9.763925] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
0000
PLL4 FB_DL: 0x10, 0
do DDR setting..[00320   32   40   48   56   ------------------------   0    0    0    0      0    0    0    0    0 0   Error loading shared library libnl-tiny.so: I/O error (needed by /sbin/swconfig) 0    0    0    0
  0    0    0    0    0  0    0    0    0    0    0    0    0    0
0005:|    0[    9.832961] SQUASHFS error: Unable to read fragment cache entry [55f06e]
    0    0    0 [    9.847087] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
   0    0    0    0    0    0    0    0    0    0    0    0
000[    9.872620] SQUASHFS error: Unable to read fragment cache entry [55f06e]
6:|    0    0   [    9.887625] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
 0    0    0    0    0    0    0    0    0    0 [    9.911782] SQUASHFS error: Unable to read fragment cache entry [55f06e]
   0    0    0  [    9.925504] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
  0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0   Error relocating /sbin/swconfig: nl_socket_free: symbol not found
Error relocating /sbin/swconfig: nlmsg_alloc: symbol not found
Error relocating /sbin/swconfig: genlmsg_put: symbol not found
Error relocating /sbin/swconfig: nl_object_free: symbol not found
Error relocating /sbin/swconfig: nl_socket_alloc: symbol not found
Error relocating /sbin/swconfig: nla_parse: symbol not found
Error relocating /sbin/swconfig: nl_perror: symbol not found
Error relocating /sbin/swconfig: nl_recvmsgs: symbol not found
Error relocating /sbin/swconfig: nl_cb_alloc: symbol not found
Error relocating /sbin/swconfig: nl_cb_set: symbol not found
Error relocating /sbin/swconfig: nla_put: symbol not found
Error relocating /sbin/swconfig: nl_wait_for_ack: symbol not found
Error relocating /sbin/swconfig: nla_next: symbol not found
Error relocating /sbin/swconfig: nl_cb_put: symbol not found
Error relocating /sbin/swconfig: genlmsg_attrlen: symbol not found
Error relocating /sbin/swconfig: genl_connect: symbol not found
Error relocating /sbin/swconfig: nl_cache_free: symbol not found
Error relocating /sbin/swconfig: nlmsg_free: symbol not found
Error relocating /sbin/swconfig: nl_send_auto_complete: symbol not found
Error relocating /sbin/swconfig: genl_ctrl_search_by_name: symbol not found
Error relocating /sbin/swconfig: genl_ctrl_alloc_cache: symbol not found
Error relocating /sbin/swconfig: genlmsg_attrdata: symbol not found
Error relocating /sbin/swconfig: nla_ok: symbol not found
 0    0    0
0008:|    0    0    0    0    0    0  0    0    0    0    0  Error loading shared library libnl-tiny.so: I/O error (needed by /sbin/swconfig)
Error relocating /sbin/swconfig: nl_socket_free: symbol not found
Error relocating /sbin/swconfig: nlmsg_alloc: symbol not found
Error relocating /sbin/swconfig: genlmsg_put: symbol not found
Error relocating /sbin/swconfig: nl_object_free: symbol not found
Error relocating /sbin/swconfig: nl_socket_alloc: symbol not found
Error relocating /sbin/swconfig: nla_parse: symbol not found
Error relocating /sbin/swconfig: nl_perror: symbol not found
Error relocating /sbin/swconfig: nl_recvmsgs: symbol not found
Error relocating /sbin/swconfig: nl_cb_alloc: symbol not found
Error relocating /sbin/swconfig: nl_cb_set: symbol not found
Error relocating /sbin/swconfig: nla_put: symbol not found
Error relocating /sbin/swconfig: nl_wait_for_ack: symbol not found
Error relocating /sbin/swconfig: nla_next: symbol not found
Error relocating /sbin/swconfig: nl_cb_put: symbol not found
Error relocating /sbin/swconfig: genlmsg_attrlen: symbol not found
Error reloc[   10.410277] urandom_read: 6 callbacks suppressed
ating /sbin/swco[   10.410289] random: procd: uninitialized urandom read (4 bytes read)
nfig: genl_connect: symbol not found
Error relocating /sbin/swconfig: nl_cache_free: symbol not found
Error relocating /sbin/swconfig: nlmsg_free: symbol not found    0    0
  Error relocating /sbin/swconfig: nl_send_auto_complete: symbol not found
Error relocating /sbin/swconfig: genl_ctrl_search_by_name: symbol not found
Error relocating /sbin/swconfig: genl_ctrl_alloc_cache: symbol not found
Error relocating /sbin/swconfig: genlmsg_attrdata: symbol not found
Error relocating /sbin/swconfig: nla_ok: symbol not found
  0    0    0    0    0    0    0    0    0    0    0    0 0    0    0    0
Error loading shared library libnl-tiny.so: I/O error (needed by /sbin/swconfig)000C:
Error relocating /sbin/swconfig: nl_socket_free: symbol not found
Error relocating /sbin/swconfig: nlmsg_alloc: symbol not found
Error relocating /sbin/swconfig: genlmsg_put: symbol not found
Error relocating /sbin/swconfig: nl_object_free: symbol not found
Error relocating /sbin/swconfig: nl_socket_alloc: symbol not found
Error relocating /sbin/swconfig: nla_parse: symbol not found
Error relocating /sbin/swconfig: nl_perror: symbol not found
Error relocating /sbin/swconfig: nl_recvmsgs: symbol not found
Error relocating /sbin/swconfig: nl_cb_alloc: symbol not found
Error relocating /sbin/swconfig: 0[   10.661653] ttyS ttyS0: 20 input overrun(s)
    0    0
000D:|    0    0    0    0    0    0    0    0    0       0    0    0    0      1    1    1    1    1    1    1    1    1    0    0
0010:|    1    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0
0011:|    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 16
rank 0 fine = 32
B:|    0    0    0    0    0    0    0    0    0    0    1    1    1    0    0    0
opt_dle value:11
DRAMC_R0DELDLY[018]=00001E1F
==================================================================
                RX      DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    13 9 13 9 13 6 13 6 3 11
10 |    5 11 7 11 6 10
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =31 DQS1 = 30
==================================================================
bit     DQS0     bit      DQS1
0  (1~60)30  8  (1~56)28
1  (1~58)29  9  (1~58)29
2  (1~60)30  10  (1~58)29
3  (1~58)29  11  (1~55)28
4  (1~58)29  12  (1~58)29
5  (1~60)30  13  (1~58)29
6  (1~60)30  14  (1~59)30
7  (1~61)31  15  (1~57)29
==================================================================
3.dq delay value last
==================================================================
bit-----------------------=============================================================
==================================================================
     TX  perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2
DQ loop=15, cmp_err_1 = ffff05aa
DQ loop=14, cmp_err_1 = ffff01aa
DQ loop=13, cmp_err_1 = ffff00a2
dqs_perbyte_dly.last_dqdly_pass[1]=13,  finish count=1
DQ loop=12, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=12,  finish count=2
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(9,8)
20,data:99
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done
                CPU=50000000 HZ BUS=16666666 HZ
===================================================================


U-Boot 1.1.3 (Sep 25 2015 - 10:29:47)

Board: Ralink APSoC DRAM:  128 MB
relocate_code Pointer at: 87fac000

Config XHCI 40M PLL
Allocate 16 byte aligned buffer: 87fe1bb0
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 F1 80 95 02]
Device found in MTK table, ID: c2f1, EXT_ID: 809502
Support this Device in MTK table! c2f1
select_chip
[NAND]select ecc bit:4, sparesize :64 sata read!
load_fact_bbt success 1023
load fact bbt success
[mtk_nand] probe successfully!
mtd->writesize=2048 mtd->oobsize=64,    mtd->erasesize=131072  devinfo.iowidth=8
Env addr : 0x100000
.*** Warning - bad CRC, using default environment

============================================
Ralink UBoot Version: 4.2.1.0
--------------------------------------------
ASIC MT7621AS (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection
DRAM_TYPE: DDR3
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: NAND Flash
Date:Sep 25 2015  Time:10:29:47
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 880 MHZ ####
 estimate memory size =128 Mbytes

Reset switch ...
#Reset_MT7530
set LAN/WAN LLLLW
..Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, cmd
1, 0x0000000D
cmd : 0x0000000D


Press Ctrl+C to Enter the Main loop...
Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, cmd
1, 0x0000000F
cmd : 0x0000000F
Enter NMRP_main
Flash Sector Number : 1024.
Bad block detected at 0x3c20000, oob_buf[0] is 0x0
NAND Section 18, has bad block at address c3820000, Image Offset 3c20000
NAND Section 18, has bad block count 1
Bad block detected at 0x6e00000, oob_buf[0] is 0x0
NAND Section 21, has bad block at address c6a00000, Image Offset 6e00000
NAND Section 21, has bad block count 1

 NetTxPacket = 0x87FE5B40

 KSEG1ADDR(NetTxPacket) = 0xA7FE5B40

 NetLoop,call eth_halt !

 NetLoop,call eth_init !
Trying Eth0 (10/100-M)

 Waitting for RX_DMA_BUSY status Start... done


 ETH_STATE_ACTIVE!!
NMRP_FLASH_SIZE_buffer --> a1000000.
NMRP:LISTENING
### No NMRP Server found ###

 KSEG1ADDR(NetTxPacket) = 0xA7FE5B40

 NetLoop,call eth_halt !

 NetLoop,call eth_init !
Trying Eth0 (10/100-M)

 ETH_STATE_ACTIVE!!
STANDALONE_LOAD_ADDR is 0xa0600000
Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, boot
Flash Sector Number : 1024.
Bad block detected at 0x3c20000, oob_buf[0] is 0x0
NAND Section 18, has bad block at address c3820000, Image Offset 3c20000
NAND Section 18, has bad block count 1
Bad block detected at 0x6e00000, oob_buf[0] is 0x0
NAND Section 21, has bad block at address c6a00000, Image Offset 6e00000
NAND Section 21, has bad block count 1

***************************************************
    Sercomm Boot Version 1.19.0

***************************************************
Upgrade flag check pass!Entering Firmware : Everything is OK.
kernel addr :0xbfe00000

 System Boot system code via Flash.
## Booting image at bfe00000 ...
[   33.506653] SQUASHFS error: xz decompression failed, data probably corrupt
[   33.520398] SQUASHFS error: squashfs_read_data failed to read block 0xa363a2
[   33.534586] SQUASHFS error: Unable to read fragment cache entry [a363a2]
[   33.548012] SQUASHFS error: Unable to read page, block a363a2, size 1419c
[   33.561311] SQUASHFS error: xz decompression failed, data probably corrupt
[   33.561590] SQUASHFS error: Unable to read fragment cache entry [a363a2]
[   33.575208] SQUASHFS error: squashfs_read_data failed to read block 0x55f06e
[   33.588554] SQUASHFS error: Unable to read page, block a363a2, size 1419c
[   33.602613] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[   33.629527] SQUASHFS error: Unable to read page, block 55f06e, size 9f18
[   33.646763] SQUASHFS error: Unable to read fragment cache entry [55f06e]
[   33.660223] SQUASHFS error: Unable to read page, block 55f06e, size 9f18

===================================================================
                MT7621   stage1 code 13:15:05 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL3 FB_DL: 0x5, 1/0 = 549/475 15000000
PLL4 FB_DL: 0x10, 1/0 = 528/496 41000000
PLL2 FB_DL: 0x15, 1/0 = 548/476 55000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0
===================================================================
                MT7621   stage1 code 13:15:05 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL3 FB_DL: 0x6, 1/0 = 738/286 19000000
PLL4 FB_DL: 0x10, 1/0 = 573/451 41000000
PLL2 FB_DL: 0x15, 1/0 = 558/466 55000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0[   12.647359] mount_root: loading kmods from internal overlay
    0    0    0 [   12.659508] ttyS ttyS0: 4 input overrun(s)
   0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0 [   12.730586] SQUASHFS error: xz decompression failed, data probably corrupt
   0    0
000B:[   12.744935] SQUASHFS error: squashfs_read_data failed to read block 0x20eb56
|    0    0    0[   12.761762] SQUASHFS error: Unable to read fragment cache entry [20eb56]
    0    0    0 [   12.777883] SQUASHFS error: Unable to read page, block 20eb56, size fb64
   0    0    0  [   12.794059] SQUASHFS error: Unable to read fragment cache entry [20eb56]
  0    0    0   [   12.810122] SQUASHFS error: Unable to read page, block 20eb56, size fb64
 0    0    0    [   12.826998] mount_root: failed to launch kmodloader from internal overlay
0
000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000E:|    0    0    0    0    0    0    0    0    0    0    1    1    1    1    1    1
000F:|    0    0    0    0    0    1    1    1    1    1    1    1    1    1    0    0
0010:|    1    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0
0011:|    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    [   13.023391] UBIFS (ubi0:1): Mounting in unauthenticated mode
0
0018:|    0  [   13.036569] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 907
  0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0 [   13.122434] UBIFS (ubi0:1): recovery needed
   0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 16
rank 0 fine = 32
B:|    0    0    0    0    0    0    0    0    0    0    1    1    1    0    0    0
opt_dle value:11
DRAMC_R0DELDLY[018]=00001E1F
==================================================================
                RX      DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    13 9 13 9 13 6 13 6 3 11
10 |    5 11 7 11 6 10
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =31 DQS1 = 30
==================================================================
bit     DQS0     bit      DQS1
[   13.338604] UBIFS (ubi0:1): recovery completed
0  (1~60)30  8  [   13.349886] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
(1~56)28
1  (1~[   13.368114] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
58)29  9  (1~58)[   13.390620] UBIFS (ubi0:1): FS size: 12697600 bytes (12 MiB, 100 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
29
2  (1~60)30 [   13.413980] UBIFS (ubi0:1): reserved for root: 599739 bytes (585 KiB)
 10  (1~58)29
3[   13.429579] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 72C09BC6-B63C-4B3B-8835-A57DCC3A1B11, small LPT model
  (1~58)29  11  [   13.457199] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
(1~55)28
4  (1~58)29  12  (1~58)29
5  (1~60)30  13  (1~58)29
6  (1~60)30  14 [   13.483838] block: extroot: not configured
 (1~59)30
7  (1[   13.493804] UBIFS (ubi0:1): un-mount UBI device 0
~61)31  15  (1~5[   13.505656] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
7)29
==========================================[   13.526833] UBIFS (ubi0:1): Mounting in unauthenticated mode
================[   13.540475] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 910
========
3.dq delay value last
==================================================================
bit|    0  1  2  3  4  5  6  7  8   9
--------------------------------------
0 |    14 11 14 11 15 7 14 6 5 12
10 |    6 13 8 12 6 11
==================================================================
==================================================================
     TX  perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2
DQ loop=15, cmp_err_1 = ffff05aa
DQ loop=14, cmp_err_1 = ffff01aa
DQ loop=13, cmp_err_1 = ffff00a2
dqs_perbyte_dly.last_dqdly_pass[1]=13,  finish count=1
DQ loop=12, cmp_err_1 = ffff0000
dqs_perbyte_dly.[   13.699041] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
last_dqdly_pass[[   13.716695] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
0]=12,  finish c[   13.739211] UBIFS (ubi0:1): FS size: 12697600 bytes (12 MiB, 100 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
ount=2
byte:0, [   13.762567] UBIFS (ubi0:1): reserved for root: 599739 bytes (585 KiB)
(DQS,DQ)=(9,8)
[   13.778176] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 72C09BC6-B63C-4B3B-8835-A57DCC3A1B11, small LPT model
byte:1, (DQS,DQ)=(9,8)
20,data:99
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done
                CPU=50000000 HZ BUS=16666666 HZ
======================1.3 (Sep 25 2015 - 10:2
relocate_code Pointer at: 87fac000

Config XHCI 40M PLL
Allocate 16 byte aligned buffer: 87fe1bb0
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 F1 80 95 02]
Device found in MTK table, ID: c2f1, EXT_ID: 809502
Support this Device in MTK table! c2f1
select_chip
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Signature matched and data read!
load_faccessfully!
mtd->writesiddr : 0x100000
.*** War=================
Ralin
ASIC MT7621AS (MAC to M16 bit
Xtal Mode=3 OCP =======================dcache: sets:256, ways:4, linesz:32 ,total:327[   13.949393] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
68

 ##### The CPU freq = 880 MHZ ####
 estimate memory size [   13.974471] block: extroot: not configured
=128 Mbytes

R[   13.984826] mount_root: switching to ubifs overlay
eset switch ...
#Reset_MT7530
set LAN/WAN LLLLW
..Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, cmd
1, 0x0000000D
cm[   14.037687] urandom-seed: Seeding with /etc/urandom.seed
d : 0x0000000D


Press Ctrl+C to Enter the Main loop...
Example expects ABI version 2
Actual U-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0, cmd
1, 0x0000000F
cmd : 0x0000000F
Enter NMRP_main
Flash Sector Number : 1024.
Bad block detected at 0x3c20000, oob_buf[0] is 0x0
NAND Section 18, has bad block at address c3820000, Image Offset 3c20000
NAND Section 18, has bad block count 1
Bad block detected at 0x6e00000, oob_buf[0] is 0x0
NAND Section 21, has bad block at address c6a00000, Image Offset 6e00000
NAND Section 21, has bad block count 1

 NetTxPacket = 0x87FE5B40

 KSEG1ADDR(NetTxPacket) = 0x !
Trying Eth0 (10/100-RP_FLASH_SIZE_buffer --> a1000000.
NMRP:LISTENING
### No NMRP Server found ###

 KSEG1ADDR(NetTxPacket) = 0xA7FE5B40

 NetLoop,call eth_halt !

 NetLoop,call eth_init !
Trying Eth0 (10/100-M)

 ETH_STATE_ACTIVE!!
STANDALONE_LOAD_ADDR is 0xa0600000
Example expects ABI ver[   14.224540] procd: - early -
sion 2
Actual U[   14.233090] procd: - watchdog -
-Boot ABI version 2

******************************************
    Uboot StandAlone Entry
******************************************
0ock detected at 0x3c20000, oob_buf[0] is 0x0
NAND Section 18, has bad block at address c3820000, Image Offset 3c20000
NAND Section 18, has bad block count 1
Bad block detected [   14.867094] procd: - watchdog -
[   14.882631] procd: - ubus -
[   15.061208] procd: - init -
at 0x6e00000, oob_buf[0] is 0x0
NAND Section 21, has bad block at address c6a00000, Image Offset 6e00000
NAND Section 21, has bad block count 1

***************************************************
    Sercomm Boot Version 1.19.0

***************************************************
Upgrade flag check pass!Entering Firmware : Everything is OK.
kernel addr :0xbfe00000

 System Boot system code via Flash.
## Booting image at bfe00000 ...
[   33.506653] SQUASHFS error: xz decompression failed, data probably corrupt
[   33.520398] SQUASHFS error: squashfs_read_data failed to read block 0xa363a2
[   33.534586] SQUASHFS error: UnPlease press Enter to activate this console.
able to read fragment cach(none) login: ade flag check pass!Entering Firmware : Everything is OK.
kernelPassword:
System Boot system code via Flash.
## Booting image at bfe00000 ...
[   16.163074] SQUASHFS error: xz decompression failed, data probably corrupt
[   16.176793] SQUASHFS error: squashfs_read_data failed to read block 0x20eb56
[   16.190831] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[   16.204171] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[   16.217591] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[   16.230934] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[   16.356895] urngd: v1.0.2 started.
[   16.589906] random: crng init done
[   17.962066] SQUASHFS error: xz decompression failed, data probably corrupt
[   17.975773] SQUASHFS error: squashfs_read_data failed to read block 0x20eb56
[   17.989806] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[   18.003143] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[   18.016527] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[   18.029869] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[   18.182635] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[   18.195995] SQUASHFS error: Unable to read page, block 20eb56, size fb64
[   18.209357] SQUASHFS error: Unable to read fragment cache entry [20eb56]
[   18.222688] SQUASHFS error: Unable to read page, block 20eb56, size fb64

[/spoiler]

tak więc:

1. wylutowałem NAND
2. Pobrałem BREED dla Nefi D1
3. Wgrałem całość na WINBOND W25Q64, mam ich całe pudełko :>
4. Wlutowałem w miejsce pod SPI FLASH, przelutowałem rezystory R50 na R51 oraz R48 na R46 (najtrudniejsze w tej całej operacji)
5. Poskładałem do kupy, podłączyłem port szeregowy z predkoscia 115200

i TADAM

Boot and Recovery Environment for Embedded Devices
Copyright (C) 2021 HackPascal <hackpascal@gmail.com>
Build date 2021-12-15 [git-f9b74d0]
Version 1.1 (r1337)

DRAM: 128MB
Platform: MediaTek MT7621S ver 1, eco 3
Board: Newifi D1
Clocks: CPU: 880MHz, DDR: 1040MHz, Bus: 220MHz, Ref: 40MHz
Flash: Winbond W25Q64 (8MB) on mt7621-spi.0
rt2880-eth: MAC address from EEPROM is invalid, using default settings.
rt2880-eth: Using MAC address 00:0c:43:00:00:01
eth0: MediaTek MT7530 Gigabit switch

Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

Press any key to interrupt autoboot ... 0

Unable to locate firmware.

Starting breed built-in shell

breed> d
Unrecognised command: d
Type 'help' to get available commands.

breed> help
Available commands:
about    - About this bootloader
abstatus - Interrupt status of autoboot
arp      - Display ARP table
autoboot - Detect firmware type and boot automatically
boot     - Boot firmware
btntst   - Test GPIO of buttons
dhcp     - Display DHCP leases
env      - Environment variables utility
envconf  - Configure environment variable block
exit     - Exit from telnet
flash    - Flash utility
gpio     - GPIO utilities
help     - Show available commands
mdio     - MDIO utility
mem      - Memory operation utilities
net      - Network control
netstat  - Display network state
reset    - Restart device
setbrg   - Set baudrate
spi      - SPI utility
sysinfo  - Display system information
thread   - Display all threads
wget     - Retrieval file through HTTP

i z tego punktu mam problem, bo muszę teraz:

1. Przygotować obraz openwrt z ustawieniami pod 8MB SPI (nigdy nie miałem okazji nawet zbudować Openwrt, nie wspominając o konfiguracji pod router)
2. Wgrać ART, bo nie mam MAC adresów.

2023-06-10 15:09:17

Cezary napisał/a:

Nadal - to jest DSA. Tyle że akurat na MT7621 zrobili jeszcze jedną fajną poprawkę: https://github.com/openwrt/openwrt/pull/10238

ale nie nie zadziała na r6220, to ma 7621ST, a to "pół" 7621

2023-06-09 11:27:08

ambrozy5 napisał/a:

A czemu nie używasz wireguard?

właśnie będę się przepinał, ale został mi jeden punkt na ovpn jeszcze, z porąbanymi trasami

2023-06-08 23:51:39

huh zrobiłem upgrade z 21 na 23, ale za cholere nie moge postawić serwera ovpn - pamiętającego jeszcze gorgyle z BB

Options error: --ipchange cannot be used with --mode server (use --client-connect instead)

nie uzywam nigdzie tej opcji...

update:
hmm openvpn odpalany z luci sie sypie jw.
jak odpalam z konsoli openvpn server.conf
to śmiga jak ta lala ...

dziwne, co za polecenie startu skleja luci ?
na razie dodałem openvpn do autostartu ...

2023-05-26 20:52:25

O, albo puszcze ze spi
https://github.com/updateing/openwrt-r6220/issues/6

2023-05-26 20:10:00

wczoraj część urządzeń z esp mi przestała działać, się okazało że mam jeszcze jeden 6220 na poddaszu myślałem że wszystkich się już pozbyłem.
Oczywiście klasycznie - żył sobie w trybie zombie do czasu aż zresetowałem główny router (xiaomi 4 giga z xwrt, uptime 675dni )
od tej chwili utracił kontakt ze światem zarówno po lan jak i wifi, po próbie restartu - błąd jak w pierwszym poście, nie wstaje.
5/6 moich 6220 tak skończyło, różne wersje openwrt. Aż dziw mnie bierze Cezary że z twoim nie było takiego problemu
Po drugim razie już ich nawet nie stawiam, mają odemnie flagę "unreliable", nie warte używania na "produkcji"

Może z jednego poświęcę na testy czy z exroota też problem kiedyś wystąpi.

2023-03-08 12:06:32

jak router z modemem to nie potrzeba USB, tylko wifi.
gdzieś opisywałem tutaj jak robiłem to u siebie w sklepie,
na routerze mwan3, jeden wan po kablu, drugi AP client dla określonej sieci wifi (u nas komórka sklepowa z pakietem internetu).
jak wan1 pada to przełącza się na hotspota z telefonu.

2023-03-04 00:02:33

szyper napisał/a:

Ej no nie przesadzaj ;-) 6gen jedynie niestety standardowo...bez modyfikacji biosu...

dlatego napisałem coffetime

2023-03-03 20:51:19

szyper napisał/a:

Celeron G3900 mostek h110
zastanawiam sie co ma tutaj najwiekszy wplyw, irqbalance jest wlaczony. Netdata pokazuje mizerne statystyki przerwan itp.
Na Zyxelu 32% obciazenia w zakladce NAT.

to jak byś chciał się bawić to @coffetime i do przodu ;p Wsadzisz wszystko co wyszło pod tą podstawkę, 5-9gen.

2023-03-03 11:46:38

na jakim mostku masz tego celerona ? rozważ wymianę na coffe, sporo zyskuje a teraz są tanie jak barszcz
https://eko.one.pl/forum/viewtopic.php? … 13#p239513

2023-02-27 11:28:40

Cezary napisał/a:

- nie kupujesz vps'a a korzystasz np. z zerotier: https://eko.one.pl/?p=openwrt-zerotier wtedy trochę j/w - r6220 łączy się do zerotier, ty z komputera łączysz się do zerotier i możesz skorzystać z jego zasobów. To nie jest wystawione w bezpośrednio w internecie więc aby dostać się do r6220 musisz mieć każdorazowo zestawiony zerotier.

btw, bo mam to rozwiazanie w routerach porozkładanych po rodzinie. Mam z nimi problem, ponieważ po bliżej nieokreślonym czasie tracą one połaczenie z zerotier i same go nie wznawiają - dopiero restart serwisu pomaga ... W tym czasie oczywiście router działa i ma połaczenie z internetem.

2023-01-28 22:09:59

Cybe napisał/a:

sdd napisał/a:
Dopisałem dwie linijki w /etc/config/firewall
w sekcji defaults
option flow_offloading 1
option flow_offloading_hw 1
HW nic ci nie da – tam masz Atherosa 9344, a HW jest od MT7621.

w sumie to od i do MT7621 ;D

ale generalnie jak coś tylko nie musi ci pracować na routerze - to wyłączaj. Każde obciążenie CPU ci ogranicza prędkosć natowania.

Teoretycznie mógłbyś jeszcze sprawdzić czy ktoś nie buduje obrazów z FastForwarding, na atherosach był sporo szybszy i stabilniejszy niż offload z oficjalnego repo.

2023-01-28 15:42:42

włączyłeś flow offload ?

system się wczytuje do ramu, z pamięci trwałej korzysta tylko przy zapisie konfiguracji etc.
W ogóle co tam masz uruchomione ze potrzebujesz exroota ? obsługa USB też zrzera zasoby które mogły byc przeznaczone na NATowanie.

2023-01-22 11:54:08

dobra, na ta chwilę straciłem połączenie z routerem. Zerotier jak straci połączenie z internetem to za każdym razem muszę restartować usługę żeby się znowu połączył ?? co to za badziew ...

Po odpięciu i podłączeniu ponownym kabla lan z netem (router robi za dummy AP) - zerotier nie wznawia połaczenia.
Trzeba restartować usługę...

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 7 z 16)

Znalezione posty: 151 do 175 z 399

151 Odpowiedź przez chemik89 2023-08-13 23:03:58

Odp: wn841 v13 + LTE + USB (90 odpowiedzi, napisanych Oprogramowanie / Software)

152 Odpowiedź przez chemik89 2023-08-13 19:51:50

Odp: wn841 v13 + LTE + USB (90 odpowiedzi, napisanych Oprogramowanie / Software)

153 Odpowiedź przez chemik89 2023-08-13 18:38:42

Odp: wn841 v13 + LTE + USB (90 odpowiedzi, napisanych Oprogramowanie / Software)

154 Temat przez chemik89 2023-08-13 18:25:35

Temat: wn841 v13 + LTE + USB (90 odpowiedzi, napisanych Oprogramowanie / Software)

155 Odpowiedź przez chemik89 2023-08-08 13:45:57

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

156 Odpowiedź przez chemik89 2023-08-08 13:33:19

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

157 Odpowiedź przez chemik89 2023-08-08 12:41:54

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

158 Odpowiedź przez chemik89 2023-08-07 10:51:43

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

159 Odpowiedź przez chemik89 2023-07-23 21:03:01

Odp: NetGear R6220 i mod miniPCIe (22 odpowiedzi, napisanych Oprogramowanie / Software)

160 Odpowiedź przez chemik89 2023-07-03 11:50:46

Odp: NETGEAR R6220 - Wymiana FLASH NAND na SPI (61 odpowiedzi, napisanych Sprzęt / Hardware)

161 Odpowiedź przez chemik89 2023-06-30 19:31:27

Odp: NETGEAR R6220 - Wymiana FLASH NAND na SPI (61 odpowiedzi, napisanych Sprzęt / Hardware)

162 Temat przez chemik89 2023-06-30 19:14:53

Temat: NETGEAR R6220 - Wymiana FLASH NAND na SPI (61 odpowiedzi, napisanych Sprzęt / Hardware)

163 Odpowiedź przez chemik89 2023-06-10 15:09:17

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

164 Odpowiedź przez chemik89 2023-06-09 11:27:08

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

165 Odpowiedź przez chemik89 2023-06-08 23:51:39

Odp: Zmiany w wydaniu OpenWrt 23.05 (860 odpowiedzi, napisanych Oprogramowanie / Software)

166 Odpowiedź przez chemik89 2023-05-26 20:52:25

Odp: r6220, błędy SQUASHFS (13 odpowiedzi, napisanych Oprogramowanie / Software)

167 Odpowiedź przez chemik89 2023-05-26 20:10:00

Odp: r6220, błędy SQUASHFS (13 odpowiedzi, napisanych Oprogramowanie / Software)

168 Odpowiedź przez chemik89 2023-03-08 12:06:32

Odp: Zasilanie awaryjne dla internetu po kablu (2 odpowiedzi, napisanych Sprzęt / Hardware)

169 Odpowiedź przez chemik89 2023-03-04 00:02:33

Odp: openwrt - prędkości, dużo użytkowników i światłowód (21 odpowiedzi, napisanych Sprzęt / Hardware)

170 Odpowiedź przez chemik89 2023-03-03 20:51:19

Odp: openwrt - prędkości, dużo użytkowników i światłowód (21 odpowiedzi, napisanych Sprzęt / Hardware)

171 Odpowiedź przez chemik89 2023-03-03 11:46:38

Odp: openwrt - prędkości, dużo użytkowników i światłowód (21 odpowiedzi, napisanych Sprzęt / Hardware)

172 Odpowiedź przez chemik89 2023-02-27 11:28:40

Odp: R6220 dostęp z zewnatrz bez publicznego IP (25 odpowiedzi, napisanych Oprogramowanie / Software)

173 Odpowiedź przez chemik89 2023-01-28 22:09:59

Odp: Światłowód 600/300 jaki polecacie router pod OpenWRT (przewodowo) (8 odpowiedzi, napisanych Sprzęt / Hardware)

174 Odpowiedź przez chemik89 2023-01-28 15:42:42

Odp: Światłowód 600/300 jaki polecacie router pod OpenWRT (przewodowo) (8 odpowiedzi, napisanych Sprzęt / Hardware)

175 Odpowiedź przez chemik89 2023-01-22 11:54:08

Odp: Serwer Proxy na openwrt (7 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 151 do 175 z 399