Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez uwarowit
Tez odgrzeje...
gnuplot z wlasciwego miejsca, pango rowniez, reszta w/g przepisu.
Placka niestety nie mam.
root@Gargoyle:/# iwlist wlan0 scan
wlan0 No scan results
lub:
root@Gargoyle:/# wifianalyzer.sh
plot '/tmp/dane.txt' every ::1::1 using 1:2:3 w labels center offset 0,1 notitle
^
"/tmp/gnuplot_cmd", line 12: warning: Skipping data file with no valid pointsTabelka (png) powstaje, jest pusta.
2011-03-25 01:29:18 w czasie startu owfs server system wykrywa mi to co trzeba
Jak widac w moich logach:
DEFAULT: owlib.c:LibStart(54) No valid 1-wire buses foundu mnie niewiele wykrywa. Wywolywanie z linii na teraz prawdopodobne nie da nic.
Z danych w plikach mam nadzieje korzystac w systemie sterowania domem => C.O., SOLAR, REKUPERATOR i temu podobne.
OWFS prawdopodobnie to potrafi.
Jak na teraz mam absolutny brak pomyslu na dalsze poszukiwanie przyczyn klopotow.
Cezary - dziekuje!
wymienilem kompletny pakiet owfs z biblioteka libow z http://downloads.openwrt.org/backfire/1 … /packages/
i:
root@Gargoyle:/# owfs --debug -p /dev/ttyUSB0 /tmp/owfs
CONNECT: owfs.c:main(123) fuse mount point: /tmp/owfs
CONNECT: ow_avahi_link.c:OW_Load_avahi_library(74) No Avahi support. Library libavahi-client couldn't be loaded
CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is disabled since dnssd library isn't found
CALL: ow_parsename.c:FS_ParsedName_anywhere(90) path=[]
DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C (for simulated adapters)
DEFAULT: owlib.c:LibStart(54) No valid 1-wire buses found
DEBUG: owfs.c:ow_exit(31) owfs: ow_exit(1)rece opadaja
przynajmniej mnie staremu
To jest wiadomosc!!!!!
Swietnie. Skad zatem pobierac jesli nie ma w: http://ecco.selfip.net/backfire/packages/ ?
Absolutnie che ograniczyc zrodla pobierania wlasnie ze wzgledu na ew. niezgodnosci.
Prosze wziac pod uwage moja absolutna niewiedze w zakresie ptasim (pingwin) jak i wiek (skleroza).
zagladam do:
http://ecco.selfip.net/backfire/packages/
http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/wyjatkiem byl digitemp od arq'a
arteq - dzieki za zainteresowanie.
root@Gargoyle:/# mkdir -p /tmp/owfs
root@Gargoyle:/# ls /tmp
TZ mounted_usb_storage.tab smb.conf
cached_basic_vars new_cron state
data nfs tmp.cron
dhcp.leases opkg-lists tmp_exports
do_bw_backup.sh overlay usb_mount
drives_found.txt owfs usr
fstab resolv.conf vsftpd
lock resolv.conf.auto
log run
root@Gargoyle:/# owfs -d /dev/ttyUSB0 /tmp/owfs
Segmentation faultjakos chyba wrocilem do poczatku....
zreszta
Segmentation faultpojawia sie przy motion, przy gnuplot.
jakis wszechobecny ten Segmentation fault - podobny do niebieskiego ekranu.
Zaczynam sie zastanawiac czy nie wyjac z zapasow T5500 i nie postawic tego wszystkiego na windzie....
Chyba dawno by toto chodzilo a ja bym sie zajal czyms pozytecznym.
Np. dokonczenie budowy domu, choc OWFS ma swoje zalety i w sterowaniu domem bylby pomocny.
ftp://artekw.cerbero.pl/openwrt/OpenWrt … ar71xx.ipk
arteq -> dziękuje! Działa - co widać na początku postu.
Do rzeczy jednak:
root@Gargoyle:/# owfs --debug -p /dev/ttyUSB0 /overlay/owfs
CONNECT: owfs.c:main(123) fuse mount point: /overlay/owfs
CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support. Library libavahi-client couldn't be loaded
CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is disabled since dnssd library isn't found
CALL: ow_parsename.c:FS_ParsedName_anywhere(90) path=[]
DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C (for simulated adapters)
DEFAULT: owlib.c:LibStart(54) No valid 1-wire buses found
DEBUG: owfs.c:ow_exit(31) owfs: ow_exit(1)Co z tym fantem poczac dalej?
Tak dla pewnosci:
root@Gargoyle:~# /usr/bin/digitemp_DS9097U -i -a -s /dev/ttyUSB0 /home -q
2879370E0200009F : DS18B20 Temperature Sensor
ROM #0 : 2879370E0200009F
Mar 23 20:15:51 Sensor 0 C: 22.56 F: 72.61czyli dziala.
root@Gargoyle:~# /usr/bin/owhttpd --debug -d /dev/ttyUSB0 -p 4444
CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support. Library libavahi-client couldn't be loaded
CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is disabled since dnssd library isn't found
CALL: ow_parsename.c:FS_ParsedName_anywhere(90) path=[]
DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C (for simulated adapters)
DEBUG: ow_ds9097U.c:DS2480_initialize_repeatedly(259) Attempt #0 to initialize the DS9097U
DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(337) Send the initial reset to the bus master.
Segmentation faultCosik mi sie widzi ze czegos chyba brak...
driver kamerke chyba zlokalizowal bo zapalil sie LED
od resetu (wylaczenie zasilania) update nie bylo
jasne.
driver do kamerkisie zainstalowal.DZIEKUJE!
co zrobic z tym:
root@Gargoyle:~# opkg install http://ecco.selfip.net/backfire/packages/kmod-vide
o-core_2.6.32.27-1cj_ar71xx.ipk
Downloading http://ecco.selfip.net/backfire/packages/kmod-video-core_2.6.32.27-1cj_ar71xx.ipk.
Multiple packages (kmod-video-core and kmod-video-core) providing same name marked HOLD or PREFER. Using latest.
Installing kmod-video-core (2.6.32.27-1cj) to root...
Collected errors:
* opkg_install_pkg: Package kmod-video-core md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
* opkg_install_cmd: Cannot install package kmod-video-core.rozumiem - nadal jednak nie wiem jaki ma byc prawidlowy url.
tak - biore z tego url.
ma byc inny?
prosze zwroc tez uwage na "md5sum mismatch" we wszystkich pobieranych pakietach
"pełny" to jest jaki?
Przy probie instalacji modulow wystapily u mnie nastepujace klopoty:
root@Gargoyle:~# opkg update
Downloading http://ecco.selfip.net/gargoyle-pl/ar71xx/packages/Packages.gz.
Inflating http://ecco.selfip.net/gargoyle-pl/ar71xx/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/gargoylepl.
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc4/ar71xx/packages/Packages.gz.
Inflating http://downloads.openwrt.org/backfire/10.03.1-rc4/ar71xx/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/packages.
root@Gargoyle:~#
root@Gargoyle:~# opkg install http://ecco.selfip.net/backfire/packages/kmod-video-core_2.6.32.27-1cj_ar71xx.ipk
Downloading http://ecco.selfip.net/backfire/packages/kmod-video-core_2.6.32.27-1cj_ar71xx.ipk.
Multiple packages (kmod-video-core and kmod-video-core) providing same name marked HOLD or PREFER. Using latest.
Installing kmod-video-core (2.6.32.27-1cj) to root...
Collected errors:
* opkg_install_pkg: Package kmod-video-core md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
* opkg_install_cmd: Cannot install package kmod-video-core.
root@Gargoyle:~# opkg install http://ecco.self.net/backfire/packages/kmod-video-
gspca-core_2.6.32.27-1cj_ar71xx.ipk
Downloading http://ecco.self.net/backfire/packages/kmod-video-gspca-core_2.6.32.27-1cj_ar71xx.ipk.
Collected errors:
* deb_extract: /tmp/opkg-bDpkpW/kmod-video-gspca-core_2.6.32.27-1cj_ar71xx.ipk: invalid magic
* pkg_init_from_file: Failed to extract control file from /tmp/opkg-bDpkpW/kmod-video-gspca-core_2.6.32.27-1cj_ar71xx.ipk.
root@Gargoyle:~#
root@Gargoyle:~# opkg install http://ecco.selfip.net/backfire/packages/kmod-vide
o-gspca-ov519_2.6.32.27-1cj_ar71xx.ipk
Downloading http://ecco.selfip.net/backfire/packages/kmod-video-gspca-ov519_2.6.32.27-1cj_ar71xx.ipk.
Multiple packages (kmod-video-gspca-ov519 and kmod-video-gspca-ov519) providing same name marked HOLD or PREFER. Using latest.
Installing kmod-video-gspca-ov519 (2.6.32.27-1cj) to root...
Collected errors:
* opkg_install_pkg: Package kmod-video-gspca-ov519 md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
* opkg_install_cmd: Cannot install package kmod-video-gspca-ov519.
root@Gargoyle:~#
root@Gargoyle:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 4096 4096 0 100% /rom
tmpfs 14720 1764 12956 12% /tmp
tmpfs 512 0 512 0% /dev
/dev/mtdblock3 2688 1616 1072 60% /overlay
mini_fo:/overlay 4096 4096 0 100% /Prosze uprzejmie o pomoc
Cezary - DZIĘKUJE!!!
Przy okazji nasunął mi się pewien drobny pomysł:
"Status połączenia 3G"
Może przydatny by był nieco bardziej rozbudowany przycisk Połącz.
Rozbudowany o wybór rodzaju połączenia GPRS, EDGE, UMTS, HSDPA, HSPA+, LTE, wymuszający tryb pracy modemu.
Robiłem - skutek żaden.
Co gorsza obecnie nie udostępnia karty uSD w modemie.
Bylo - nie ma.
Modemy HUAWEI E1750 oraz E1752 to praktycznie to samo. Nawet firmware jest identyczne.
rmmod option
insmod option
logread
Mar 12 18:21:01 Gargoyle cron.err crond[2058]: USER root pid 10625 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Mar 12 18:21:42 Gargoyle user.info kernel: usbcore: deregistering interface driver option
Mar 12 18:21:42 Gargoyle user.info kernel: USB Serial deregistering driver GSM modem (1-port)
Mar 12 18:22:07 Gargoyle user.info kernel: USB Serial support registered for GSM modem (1-port)
Mar 12 18:22:07 Gargoyle user.info kernel: usbcore: registered new interface driver option
Mar 12 18:22:07 Gargoyle user.info kernel: option: v0.7.2:USB Driver for GSM modemsecho "0x12d1 0x141b" > /sys/bus/usb-serial/drivers/option1/new_id
cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 1/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.32.27 ehci_hcd
S: Product=Atheros AR91xx built-in EHCI controller
S: SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=141b Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0msCzy mam rozumieć ze nici z tej konfiguracji?
root@Gargoyle:~# usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446
Warning: TargetProductList overrides TargetProduct!
Looking for target devices ...
Found devices in target mode or class (1)
Looking for default devices ...
No devices in default mode or class found. Nothing to do. Bye.Rozumiem ze się pytasz o zawartość pliku /etc/usb_modeswitch.conf
W /etc/usb_modeswitch.d/12d1:1446 jest jakby zawartość.
Przykłady brałem tez z innych opisów na http://eko.one.pl/forum
root@Gargoyle:~# echo "0x12d1 0x141b" > /sys/bus/usb-serial/drivers/option1/new_id
root@Gargoyle:~# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 1/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.32.27 ehci_hcd
S: Product=Atheros AR91xx built-in EHCI controller
S: SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=141b Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0mslogread
Mar 12 13:41:01 Gargoyle cron.err crond[2058]: USER root pid 10388 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1wyplul z siebie 1 linijke
root@Gargoyle:~# echo "0x12d1 0x141b" > /sys/bus/usb-serial/drivers/option1/new_
id
root@Gargoyle:~#cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 1/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.32.27 ehci_hcd
S: Product=Atheros AR91xx built-in EHCI controller
S: SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=141b Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0mseko.one.pl → Posty przez uwarowit
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc