Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez armen10
mr8300 ma 2x wiecej ramu tj 512MB , https://forum.openwrt.org/t/community-b … kages/60/3 , tam watek z zoptymalizowanym obrazem
Kupiłem mr8300, zobaczymy, jak będzie śmigał.
Cześć, czy LINKSYS MR8300 AC2200 ROUTER WIFI na pewno obsłuży openwrt ?
Na wykazie nimby jest "Linksys EA8300", ale wolę się upewnić.
Poszukaj na allegro co jest dostępne i zobacz czy openwrt na to jest. No sorry, sam możesz to zrobić, nie muszę tego robić ja za ciebie.
Ok bardzo Ci dziękuję.
A coś podobnego, dostępnego np. na allegro, coś byś mógł mi zaproponować ? 
Coś do 400zł
Cześć, czy na tym ruterze (Linksys EA7500V3-EU) pójdzie openwrt ?
Znowu mi pomogłeś. Jesteś Wielki !
Wgraj bez zachowania konfiguracji i z wymuszeniem. Dokładnie to opisuje komunikat. Przeczytaj listę zmian w ostatnich wydaniach, publikuję to tutaj:
https://eko.one.pl/forum/viewtopic.php?id=18686
https://eko.one.pl/forum/viewtopic.php?id=20877
https://eko.one.pl/forum/viewtopic.php?id=21964
wooo ale urwał ile to czytania...
A tak w skrócie pobrać Twój obraz do Linksys WRT1900ACSv2 i zrobić: sysupgrade -v --force tak ?
Cześć mam WRT1900ACSv2, który ma stare openwrt i chciałbym wgrać nowe, ale mam coś takiego ?
Co tu trzeba zrobić, aby wgrać najnowszy obraz ?
root@LEDE:/tmp# sysupgrade -n -v luci-22.03-sysupgrade.bin
Device armada-385-linksys-shelby not supported by this image
Supported devices: linksys,wrt1900acs armada-385-linksys-shelby linksys,shelby - Image version mismatch: image 1.1, device 1.0. Please wipe config during upgrade (force required) or reinstall. Reason: Config cannot be migrated from swconfig to DSA
Image check 'fwtool_check_image' failed.
Mój klient wygląda tak, jak poniżej.
Jak wpisałem gatewaya serwera (LANu), to vpn przestał działać.
Server ma LAN 192.168.9.254 i ten adres jest przydzielany jako gateway w urządzeniach, które mają dhcp.
Klient skąd ma adres IP? Z lanu serwera? jeżeli tak to powinien dostać też i dns i gatewaya z serwera, pewnie wskazujące na serwer. Jeżeli klientowi ustawiłeś adres ręcznie to ustaw także gatewaya.
Klient skąd ma adres IP? Z lanu serwera? - klient ma statyczny LAN, DHCP wyłączone
Ok potestuje...
Ok, naprawiłem uff...
Ale nie osiągnąłem tego czego szukam 
Nie wiem, jaki gateway wpisać u klienta. Na serwerze jest sieć LAN i WAN. WAN na gatewaya, LAN nie.
Wpisanie u klienta gatewaya z WAN nic nie dało.
Jak wpisałem na serwerze dla danego peera w allowedips całą podsieć lokalną (192.168.9.0/24), to już nie mogłem się zalogować przez www na adres lokalny serwera 192.168.9.254 tylko mogłem przez adres vpna 10.8.0.1
Na taki jaki masz gateway w sieci lokalnej. Pewnie ten serwer.
Dziwne pytanie w sumie.
Myślę, że nie ma "dziwnych" pytań są tylko mniej lub bardziej doświadczeni 
A jak na serwerze też nie mam ustawionego, a na kliencie w sieci lokalnej podaje IP serwera, to źle ?
Właśnie wpisałem gatewaya na serwerze i już nie mogę na niego wejść... Teraz musze z tym powalczyć...
Zawsze gatewayem był ip serwera i to wystarczyło.
I gdzie giną pakiety? Co się pinguje a co nie? I czy klient w lanie ma gatewaya ustawionego?
Klient nie ma ustawionego gatewaya. A jaki tam powinien być ?
Na kliencie już nic. Na serwerze - dla danego peera w allowedips wstaw adresację sieci lokalnej za serwerem (np. 192.168.1.0/24) oraz zezwól na forwarding pomiędzy sekcją wireguard a siecią lokalną.
Ok dodałem na serwerze, ale coś nie chce zabanglać...
root@OpenWrt_ODDK:~# cat /etc/config/firewall
config forwarding
option src 'wg'
option dest 'wan'
config forwarding
option src 'wan'
option dest 'wg'
config forwarding
option src 'wg'
option dest 'lan'
config forwarding
option src 'lan'
option dest 'wg'SERWER:
config interface 'wg0'
option proto 'wireguard'
option private_key '0OZe1s57/p7dNuzImVObWmtWmDR2Ob9B7Z67SMK0O24='
option listen_port '51820'
list addresses '10.8.0.1/24'
config wireguard_wg0
option public_key 'TsuCSFcMRv/GBqGVoNsh/6nZy5iWqWWUoFddV5k3/2A='
option route_allowed_ips '1'
option persistent_keepalive '25'
option description 'tp-mr3020'
list allowed_ips '10.8.0.4/32'
list allowed_ips '192.168.9.0/24'Ok, super udało się połączyć.
Serwer ma: 10.8.0.1 [sieć vpn]
Klient ma: 10.8.0.4 [sieć vpn]
Po vpnie mam dostęp tylko do sieci vpn
A co ustawić na kliencie (lub serwerze), aby miał dostęp do całej sieci lokalnej serwera ? [Sieć lokalna serwera: 192.168.11.1/24]
Klient:
config interface 'wg0'
option proto 'wireguard'
option private_key 'AKRhzI1PPdV/43I/Ze78RRGozux1DLZUchgbdNdZuUg='
list addresses '10.8.0.4/32'
config wireguard_wg0
option public_key 'D83XmDy5uc3sQaCuWa08hb6ZwR2kMQdoDvZCJRDQ1S4='
option route_allowed_ips '1'
list allowed_ips '0.0.0.0/0'
option endpoint_host '.noip.pl'
option endpoint_port '51820'
option persistent_keepalive '25'
option description 'tl-mr3020'Klucze masz źle wpisane, masz to samo w
option public_key 'D83XmDy5uc3sQaCuWa08hb6ZwR2kMQdoDvZCJRDQ1S4='
w kliencie i na serwerze a maja być klucze publiczne dla peerów i prywatne w interfejsach.
option public_key 'D83XmDy5uc3sQaCuWa08hb6ZwR2kMQdoDvZCJRDQ1S4=' - to klucz publiczny serwera, to źle ?
Cześć mam 2 routery:
- tp-link wdr4300 [server]
- tp-link mr3020 [klient]
Nie mogę sparować tych 2 urządzeń chociaż robię wg poradnika z forum [https://eko.one.pl/?p=openwrt-wireguard]
SERVER
root@OpenWrt_ODDK:~# cat /etc/config/network
config interface 'wg0'
option proto 'wireguard'
option private_key '0OZe1s57/p7dNuzImVObWmtWmDR2Ob9B7Z67SMK0O24='
option listen_port '51820'
list addresses '10.8.0.1/24'
config wireguard_wg0
option public_key 'D83XmDy5uc3sQaCuWa08hb6ZwR2kMQdoDvZCJRDQ1S4='
option route_allowed_ips '1'
list allowed_ips '10.8.0.4/32'
option persistent_keepalive '25'
option description 'tp-mr3020'
option endpoint_host 'xxxxx.noip.pl'KLIENT
root@TL-MR3020:~# cat /etc/config/network
config interface 'wg0'
option proto 'wireguard'
option private_key 'AKRhzI1PPdV/43I/Ze78RRGozux1DLZUchgbdNdZuUg='
list addresses '10.8.0.4/32'
option listen_port '51820'
config wireguard_wg0
option route_allowed_ips '1'
list allowed_ips '0.0.0.0/0'
option endpoint_host 'xxxxx.noip.pl'
option persistent_keepalive '25'
option description 'tl-mr3020'
option endpoint_port '51820'
option public_key 'D83XmDy5uc3sQaCuWa08hb6ZwR2kMQdoDvZCJRDQ1S4='
config interface 'wwan'
option proto 'dhcp'Co tu może być nie tak ?
Z góry bardzo dziękuję za pomoc.
Dziękuję.
Poradziłem sobie tak, że zainstalowałem sobie podstawowe oprogramowanie Luci i zainstalowałem tylko WireGuarda, bo tylko to mi jest potrzebne no i modem i wszystko siedzi.
Tylko przez te oryginalne Openwrt jakoś wolniej net śmiga...
Połączyłem ruter przez wifi do neta i kablem do laptopa i net chodzi bardzo wolno w porównaniu z Twoim OpenWrt, to w Twojej wersji net śmiga jak głupi.
Tak. Obraz z luci jest za duży dla tego modelu i już nie robi się jffs. Użyj obrazu bez luci.
Usunę te obrazy przy okazji.
Bez Luci ? hehe szkoda...
Nie robił ci się jffs? Zrestatuj router i pokaż wyniki
logread
mount
df -h
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.5M 5.5M 0 100% /rom
tmpfs 28.1M 268.0K 27.9M 1% /tmp
tmpfs 28.1M 112.0K 28.0M 0% /tmp/root
overlayfs:/tmp/root 28.1M 112.0K 28.0M 0% /
tmpfs 512.0K 0 512.0K 0% /devroot@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
overlayfs:/tmp/root on / type overlay (rw,noatime,lowerdir=/,upperdir=/tmp/root/upper,workdir=/tmp/root/work)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
none on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)root@OpenWrt:~# logread
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.000000] Linux version 5.10.138 (cezary@eko.one.pl) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19162-a036c1d43b) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Sat Sep 3 18:56:06 2022
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Board has DDR2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Analog PMU set to hw control
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Digital PMU set to hw control
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] printk: bootconsole [early0] enabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] MIPS: machine is TP-Link TL-MR3020 v3
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Zone ranges:
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Movable zone start for each node
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Early memory node ranges
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] Normal zone: 144 pages used for memmap
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Writing ErrCtl register=0004b37a
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Readback ErrCtl register=0004b37a
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] Memory: 56412K/65536K available (5667K kernel code, 618K rwdata, 692K rodata, 1204K init, 210K bss, 9124K reserved, 0K cma-reserved)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] NR_IRQS: 256
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] intc: using register map from devicetree
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] CPU Clock: 580MHz
Sat Sep 3 20:56:19 2022 kern.crit kernel: [ 0.000000] timer_probe: no matching timers found
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.007645] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.073573] pid_max: default: 32768 minimum: 301
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.078209] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.085228] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.095146] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.106621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.116140] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.122793] pinctrl core: initialized pinctrl subsystem
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.132886] NET: Registered protocol family 16
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.138038] thermal_sys: Registered thermal governor 'step_wise'
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.202615] clocksource: Switched to clocksource MIPS
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.214663] NET: Registered protocol family 2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.219118] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.227061] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.235222] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.242581] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.249381] TCP: Hash tables configured (established 1024 bind 1024)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.255683] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.261963] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.269068] NET: Registered protocol family 1
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.273319] PCI: CLS 0 bytes, default 32
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.284982] workingset: timestamp_bits=14 max_order=14 bucket_order=0
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.296585] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.302165] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.314036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.323824] mt7621_gpio 10000600.gpio: registering 32 gpios
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.329390] mt7621_gpio 10000600.gpio: registering 32 gpios
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.335116] mt7621_gpio 10000600.gpio: registering 32 gpios
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.340734] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.349673] printk: console [ttyS0] disabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.353913] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.362647] printk: console [ttyS0] enabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.371037] printk: bootconsole [early0] disabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.382042] spi-mt7621 10000b00.spi: sys_freq: 193333333
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.407505] spi-nor spi0.0: s25fl064k (8192 Kbytes)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.412527] 4 fixed-partitions partitions found on MTD device spi0.0
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.419110] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.426565] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.434417] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.err kernel: [ 0.441856] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.449920] Creating 4 MTD partitions on "spi0.0":
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.454860] 0x000000000000-0x000000020000 : "boot"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.464000] 0x000000020000-0x0000007c0000 : "firmware"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.470650] 2 tplink-fw partitions found on MTD device firmware
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.476763] Creating 2 MTD partitions on "firmware":
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.481806] 0x000000000000-0x0000002182d0 : "kernel"
Sat Sep 3 20:56:19 2022 kern.warn kernel: [ 0.486852] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.498360] 0x0000002182d0-0x0000007a0000 : "rootfs"
Sat Sep 3 20:56:19 2022 kern.warn kernel: [ 0.503488] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.514021] mtd: device 3 (rootfs) set to be root filesystem
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.520855] 1 squashfs-split partitions found on MTD device rootfs
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.527223] 0x000000790000-0x0000007a0000 : "rootfs_data"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.534057] 0x0000007c0000-0x0000007d0000 : "config"
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 0.542106] 0x0000007d0000-0x000000800000 : "factory"
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.600766] rt3050-esw 10110000.esw: mediatek esw at 0xb0110000, irq 25 initialized
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.609474] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.619804] NET: Registered protocol family 10
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.630241] Segment Routing with IPv6
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.634184] NET: Registered protocol family 17
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.638792] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.651966] 8021q: 802.1Q VLAN Support v1.8
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.657002] gpio-export gpio_export: 1 gpio(s) exported
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.670893] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.684923] Freeing unused kernel memory: 1204K
Sat Sep 3 20:56:19 2022 kern.warn kernel: [ 0.689520] This architecture does not have kernel memory protection.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 0.696095] Run /sbin/init as init process
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700242] with arguments:
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700248] /sbin/init
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700252] with environment:
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700257] HOME=/
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 0.700262] TERM=linux
Sat Sep 3 20:56:19 2022 user.info kernel: [ 1.404290] init: Console is alive
Sat Sep 3 20:56:19 2022 user.info kernel: [ 1.408344] init: - watchdog -
Sat Sep 3 20:56:19 2022 user.info kernel: [ 3.400337] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.470320] usbcore: registered new interface driver usbfs
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.476050] usbcore: registered new interface driver hub
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.481566] usbcore: registered new device driver usb
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.544984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 3.561979] SCSI subsystem initialized
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.573896] ehci-fsl: Freescale EHCI Host controller driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.581571] ehci-platform: EHCI generic platform driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.597415] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.604234] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.609531] ehci-platform 101c0000.ehci: EHCI Host Controller
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.615428] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.623635] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.652640] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.660107] hub 1-0:1.0: USB hub found
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.664978] hub 1-0:1.0: 1 port detected
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.677564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.685707] ohci-platform: OHCI generic platform driver
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.691423] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.698422] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.706615] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.787719] hub 2-0:1.0: USB hub found
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.792465] hub 2-0:1.0: 1 port detected
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.810496] usbcore: registered new interface driver usb-storage
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 3.820202] usbcore: registered new interface driver uas
Sat Sep 3 20:56:19 2022 user.info kernel: [ 3.827259] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 3.845285] init: - preinit -
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 4.815936] rt3050-esw 10110000.esw: port 0 link up
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 5.005596] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 5.118375] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 5.224477] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 5.790703] rt3050-esw 10110000.esw: port 0 link down
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 6.043354] random: procd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 9.914031] rt3050-esw 10110000.esw: port 0 link up
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 9.919053] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 9.926026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.330318] mount_root: loading kmods from internal overlay
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.400646] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.415788] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.801060] block: attempting to load /etc/config/fstab
Sat Sep 3 20:56:19 2022 user.err kernel: [ 10.815030] block: unable to load configuration (fstab: Entry not found)
Sat Sep 3 20:56:19 2022 user.err kernel: [ 10.822281] block: no usable configuration
Sat Sep 3 20:56:19 2022 user.notice kernel: [ 10.827825] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Sat Sep 3 20:56:19 2022 user.warn kernel: [ 10.853442] urandom-seed: Seed file not found (/etc/urandom.seed)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.982086] procd: - early -
Sat Sep 3 20:56:19 2022 user.info kernel: [ 10.986299] procd: - watchdog -
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 11.750170] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 11.865815] procd: - watchdog -
Sat Sep 3 20:56:19 2022 user.info kernel: [ 11.873684] procd: - ubus -
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 12.092885] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 12.102354] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 12.128889] procd: - init -
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 13.230967] random: jshn: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 13.401828] random: ubusd: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 13.414519] random: ubus: uninitialized urandom read (4 bytes read)
Sat Sep 3 20:56:19 2022 user.info kernel: [ 14.646267] kmodloader: loading kernel modules from /etc/modules.d/*
Sat Sep 3 20:56:19 2022 user.info kernel: [ 15.614753] urngd: v1.0.2 started.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.701263] fuse: init (API version 7.32)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.795201] usbcore: registered new interface driver cdc_acm
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.800958] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.854445] usbcore: registered new interface driver cdc_wdm
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.884336] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.892033] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 15.997275] usbcore: registered new interface driver usblp
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.046906] usbcore: registered new interface driver usbserial_generic
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.053731] usbserial: USB Serial support registered for generic
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.104722] usbcore: registered new interface driver cdc_ether
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.135786] usbcore: registered new interface driver cdc_ncm
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.333737] usbcore: registered new interface driver huawei_cdc_ncm
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 16.568639] random: crng init done
Sat Sep 3 20:56:19 2022 kern.notice kernel: [ 16.572114] random: 34 urandom warning(s) missed due to ratelimiting
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 16.686812] mt76_wmac 10300000.wmac: ASIC revision: 76280001
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 17.785393] mt76_wmac 10300000.wmac: Firmware Version: 20151201
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 17.791420] mt76_wmac 10300000.wmac: Build Time: 20151201183641
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 17.812622] mt76_wmac 10300000.wmac: firmware init done
Sat Sep 3 20:56:19 2022 kern.debug kernel: [ 17.983658] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.235631] PPP generic driver version 2.4.2
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.248872] NET: Registered protocol family 24
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.266010] usbcore: registered new interface driver qmi_wwan
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.285758] usbcore: registered new interface driver rndis_host
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.305405] usbcore: registered new interface driver sierra
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.311168] usbserial: USB Serial support registered for Sierra USB modem
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.335414] usbcore: registered new interface driver sierra_net
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.417404] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.425455] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.439093] usbcore: registered new interface driver cdc_mbim
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.461576] usbcore: registered new interface driver option
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.467418] usbserial: USB Serial support registered for GSM modem (1-port)
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.504655] usbcore: registered new interface driver qcserial
Sat Sep 3 20:56:19 2022 kern.info kernel: [ 18.510588] usbserial: USB Serial support registered for Qualcomm USB modem
Sat Sep 3 20:56:19 2022 user.info kernel: [ 18.541914] kmodloader: done loading kernel modules from /etc/modules.d/*
Sat Sep 3 20:56:21 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sat Sep 3 20:56:21 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sat Sep 3 20:56:21 2022 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Sep 3 20:56:23 2022 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:56:23 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sat Sep 3 20:56:36 2022 authpriv.info dropbear[1648]: Not backgrounding
Sat Sep 3 20:56:41 2022 daemon.notice wpa_supplicant[1785]: Successfully initialized wpa_supplicant
Sat Sep 3 20:56:41 2022 kern.info kernel: [ 48.220717] rt3050-esw 10110000.esw: port 0 link down
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: bonding
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: 8021ad
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: 8021q
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: macvlan
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: veth
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: bridge
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: Network device
Sat Sep 3 20:56:42 2022 user.notice : Added device handler type: tunnel
Sat Sep 3 20:56:45 2022 kern.info kernel: [ 52.344051] rt3050-esw 10110000.esw: port 0 link up
Sat Sep 3 20:56:47 2022 user.info adblock-4.1.3[1969]: backup directory '/tmp/adblock-Backup' created
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Sat Sep 3 20:56:49 2022 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Sat Sep 3 20:56:49 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Sat Sep 3 20:56:50 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Sat Sep 3 20:56:50 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Sat Sep 3 20:56:51 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Sat Sep 3 20:56:53 2022 daemon.err mount_root: failed - mount -t jffs2 /dev/mtdblock4 /rom/overlay: Not a tty
Sat Sep 3 20:56:53 2022 kern.err kernel: [ 60.303004] Too few erase blocks (1)
Sat Sep 3 20:56:53 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.740902] br-lan: port 1(eth0.1) entered blocking state
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.746656] br-lan: port 1(eth0.1) entered disabled state
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.752516] device eth0.1 entered promiscuous mode
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.757450] device eth0 entered promiscuous mode
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.788012] br-lan: port 1(eth0.1) entered blocking state
Sat Sep 3 20:56:55 2022 kern.info kernel: [ 61.793579] br-lan: port 1(eth0.1) entered forwarding state
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' is enabled
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' is setting up now
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' is now up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: bridge 'br-lan' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' is enabled
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' is now up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Network device 'eth0' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Network device 'lo' link is up
Sat Sep 3 20:56:55 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Sep 3 20:56:55 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Sat Sep 3 20:56:56 2022 kern.info kernel: [ 62.743123] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sat Sep 3 20:56:56 2022 daemon.err odhcpd[2038]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sat Sep 3 20:56:56 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Sep 3 20:57:00 2022 daemon.info urandom_seed[3108]: Seed saved (/etc/urandom.seed)
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Sep 3 20:57:00 2022 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Sep 3 20:57:00 2022 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 1 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 1 addresses
Sat Sep 3 20:57:01 2022 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 74:46:a0:3a:4d:cc
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.1.161 74:46:a0:3a:4d:cc
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.1.161 74:46:a0:3a:4d:cc
Sat Sep 3 20:57:05 2022 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.1.161 74:46:a0:3a:4d:cc HP
Sat Sep 3 20:57:05 2022 daemon.info procd: - init complete -
Sat Sep 3 20:57:23 2022 user.info adblock-4.1.3[1969]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Sat Sep 3 20:57:33 2022 user.info : luci: accepted login on / for root from 192.168.1.161
Sat Sep 3 20:57:45 2022 auth.err passwd: password for root changed by root
Sat Sep 3 20:57:54 2022 authpriv.info dropbear[3871]: Child connection from 192.168.1.161:64202
Sat Sep 3 20:57:59 2022 authpriv.notice dropbear[3871]: Password auth succeeded for 'root' from 192.168.1.161:64202Cześć, mam problem z zapamiętaniem ustawień na ruterze TP-Link TL-MR3020 v3.20.
Po restarcie wracają początkowe (domyślne) ustawienia. Poza tym problemem system OpenWrt działa super i szybko.
Openwrt wgrywałem przez FTP, korzystając z obrazów:
https://dl.eko.one.pl/firmware/?version=luci-22.03-SNAPSHOT&target=ramips%2Fmt76x8&id=tplink_tl-mr3020-v3Najpierw obraz TFTP-RECOVERY potem SYSUPGRADE.
Z góry dziękuję za pomoc
Nie będę już poprawiał pakietu/szukał recepty na błędy. Pakiet wymaga przepisania na nowe LuCI JS, bo już traci/stracił na funkcjonalności.
Czyli projekt nie będzie rozwijany ?
Źle... To nie jest urządzenie qmi tylko ncm.
option proto 'ncm'
option device '/dev/ttyACM0'
option apn 'internet'
A jak dodać nowy interfejs, do którego chciałbym podłączyć kabel z WANem ?
Tak, aby mieć 2 niezależne sieci. WAN z GSM i WAN po kablu.
no ale aby ustawić zewnętrzną trasę, trzeba mieć właśnie jakiegoś vpn'a, tylko jak go skonfigurować i co polecasz?
Ja polecam:
https://eko.one.pl/?p=openwrt-wireguard
lub
https://openwrt.org/docs/guide-user/ser … ard/server
https://openwrt.org/docs/guide-user/ser … ard/client
Moj apel.. jak ktos pobral zrodla / pakiet do instalacji to prosze chociaz o maly komentarz czy dziala, na czym.. moze ktos ma jeszcze jakis pomysl co dodac, jak polepszyc apke.. chce po prostu wiedziec ze ktos jej uzywa, taka mala motywacja dla autora..
Mimo tych błędów wysyłanie i odbieranie działa, ale może dałoby radę te błędy poprawić wtedy byłoby super.
Co do usuwania wiadomości, to mimo usunięcia smsa i odświeżenia listy, to sms ponownie się pokazuje.
Ciekawe jest to, że jak zaznaczę wszystkie smsy, to wszystkie usuwa i nic się nie pokazuje po odświeżeniu listy.
Mój modem to: /dev/ttyACM0 (karta Playa włożona do rutera)
Po instalacji pakietu:
- luci-app-sms-tool_1.9.5-20220816_all.ipk - wyrzuca błędy
root@OpenWrt:~# opkg install luci-app-sms-tool_1.9.5-20220816_all.ipk
Installing luci-app-sms-tool (1.9.5-20220816) to root...
Installing sms-tool (2022-03-21-f07699ab-1) to root...
Downloading https://dl.eko.one.pl/openwrt-22.03/packages/mips_24kc/base/sms-tool_2022-03-21-f07699ab-1_mips_24kc.ipk
Configuring sms-tool.
Configuring luci-app-sms-tool.
//usr/lib/opkg/info/luci-app-sms-tool.postinst: /etc/uci-defaults/start-smsled: line 5: /etc/init.d/smsled: Permission denied
uci: Entry not found
uci: Entry not found
uci: Parse error (invalid command) at line 1, byte 0
uci: Entry not found (invalid command) at line 1, byte 0
//usr/lib/opkg/info/luci-app-sms-tool.postinst: line 301: /etc/init.d/smsled: Permission denied
//usr/lib/opkg/info/luci-app-sms-tool.postinst: line 303: /etc/init.d/smsled: Permission deniedPo instalacji pakietu:
- luci-i18n-sms-tool-pl_unknown_all.ipk - wyrzuca błedy (brak języka PL)
root@OpenWrt:~# opkg install luci-i18n-sms-tool-pl_unknown_all.ipk
Installing luci-i18n-sms-tool-pl (unknown) to root...
Configuring luci-i18n-sms-tool-pl.
uci: Entry not found
uci: Entry not found
uci: Parse error (invalid command) at line 1, byte 0
uci: Entry not found (invalid command) at line 1, byte 0
eko.one.pl → Posty przez armen10
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc