WR710n v1.2 wesja z 8Mb Flash

root@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/up                            per,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 4.8M      4.8M         0 100% /rom
tmpfs                    13.6M    928.0K     12.7M   7% /tmp
/dev/mtdblock3            1.8M      1.0M    752.0K  58% /overlay
overlayfs:/overlay        1.8M      1.0M    752.0K  58% /
tmpfs                   512.0K         0    512.0K   0% /dev
root@OpenWrt:~#

jak podam mu plik sysupgrade z gargoile to i tak wstaje mi z luci, a jak próbowałem programatorem plikiem factory to stawał mi podczas przenoszenia z ramu do flash i wisiał.

Co robię, źle?

t 1.1.4 (Apr 19 2013 - 15:56:20)

AP121 (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 8388608, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... Stream with EOS marker is not supportedLZMA ERROR 1 - must RESET

U-Boot 1.1.4 (Apr 19 2013 - 15:56:20)

AP121 (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 8388608, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... Stream with EOS marker is not supportedLZMA ERROR 1 - must RESET

U-Boot 1.1.4 (Apr 19 2013 - 15:56:20)

AP121 (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 8388608, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup
eth1 up
eth0, eth1
Autobooting in 1 seconds
hornet> erase 09f020000 +0x7C0000

First 0x2 last 0x7d sector size 0x10000                                      125
Erased 124 sectors
hornet> tftpboot 0x81000000 code1.bin
eth1 link down
dup 1 speed 100
Using eth0 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.111
Filename 'code1.bin'.
Load address: 0x81000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ############################
done
Bytes transferred = 8126464 (7c0000 hex)
hornet> cp.b 0x81000000 0x9f020000 0x7C0000
Copy to Flash... write addr: 9f020000
done
hornet> bootm 0x9f020000
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 4.9.152 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7549-217219e) ) #0 Mon Jan 28 08:54:32 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR710N  console=ttyATH0,115200 rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 27540K/32768K available (3388K kernel code, 175K rwdata, 448K rodata, 268K init, 211K bss, 5228K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.007580] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.088748] pid_max: default: 32768 minimum: 301
[    0.093335] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.099504] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.110234] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.118273] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.125953] NET: Registered protocol family 16
[    0.130893] MIPS: machine is TP-LINK TL-WR710N v1
[    0.656523] Can't analyze schedule() prologue at 803ab684
[    0.678364] clocksource: Switched to clocksource MIPS
[    0.683315] NET: Registered protocol family 2
[    0.687516] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.692870] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.698929] TCP: Hash tables configured (established 1024 bind 1024)
[    0.705108] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.710595] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.716838] NET: Registered protocol family 1
[    0.725816] Crashlog allocated RAM at address 0x1f00000
[    0.731083] workingset: timestamp_bits=30 max_order=13 bucket_order=0
[    0.746257] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.750513] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.772985] io scheduler noop registered
[    0.775349] io scheduler deadline registered (default)
[    0.780899] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.790367] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.798142] console [ttyATH0] enabled
[    0.798142] console [ttyATH0] enabled
[    0.805057] bootconsole [early0] disabled
[    0.805057] bootconsole [early0] disabled
[    0.821178] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.837075] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.840806] 5 tp-link partitions found on MTD device spi0.0
[    0.845961] Creating 5 MTD partitions on "spi0.0":
[    0.850796] 0x000000000000-0x000000020000 : "u-boot"
[    0.858452] 0x000000020000-0x000000170364 : "kernel"
[    0.864830] 0x000000170364-0x0000007f0000 : "rootfs"
[    0.870701] mtd: device 2 (rootfs) set to be root filesystem
[    0.874943] 1 squashfs-split partitions found on MTD device rootfs
[    0.881164] 0x0000003c0000-0x0000007f0000 : "rootfs_data"
[    0.889613] 0x0000007f0000-0x000000800000 : "art"
[    0.895757] 0x000000020000-0x0000007f0000 : "firmware"
[    0.903838] libphy: Fixed MDIO Bus: probed
[    0.926100] libphy: ag71xx_mdio: probed
[    1.560075] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.568841] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.199847] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
[    2.241936] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.248836] NET: Registered protocol family 10
[    2.256638] NET: Registered protocol family 17
[    2.259787] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.272746] 8021q: 802.1Q VLAN Support v1.8
[    2.279106] hctosys: unable to open rtc device (rtc0)
[    2.289722] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.297357] Freeing unused kernel memory: 268K
[    2.300397] This architecture does not have kernel memory protection.
[    2.538378] random: fast init done
[    3.211744] init: Console is alive
[    3.213990] init: - watchdog -
[    4.480003] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.569334] usbcore: registered new interface driver usbfs
[    4.573484] usbcore: registered new interface driver hub
[    4.578859] usbcore: registered new device driver usb
[    4.591286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.598577] ehci-platform: EHCI generic platform driver
[    4.602459] ehci-platform ehci-platform: EHCI Host Controller
[    4.608146] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    4.618175] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    4.648424] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    4.654514] hub 1-0:1.0: USB hub found
[    4.657411] hub 1-0:1.0: 1 port detected
[    4.662127] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.678772] init: - preinit -
[    5.801968] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    5.835590] random: procd: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    9.135676] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    9.176806] urandom-seed: Seed file not found (/etc/urandom.seed)
[    9.462928] procd: - early -
[    9.464489] procd: - watchdog -
[   10.145137] procd: - watchdog -
[   10.147205] procd: - ubus -
[   10.287158] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.361659] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.367202] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.374340] procd: - init -
Please press Enter to activate this console.
[   10.848717] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.860250] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.879876] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   10.886429] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   10.897340] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.913213] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[   10.997081] xt_time: kernel timezone is -0000
[   11.077322] PPP generic driver version 2.4.2
[   11.083783] NET: Registered protocol family 24
[   11.161872] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   11.205031] kmodloader: done loading kernel modules from /etc/modules.d/*
[   12.571376] urandom_read: 5 callbacks suppressed
[   12.571388] random: jshn: uninitialized urandom read (4 bytes read)
[   31.624295] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   31.654609] jffs2_build_filesystem(): unlocking the mtd device... [   31.669485] done.
[   31.669972] jffs2_build_filesystem(): erasing all blocks after the end marker... [   32.673209] br-lan: port 1(eth1) entered blocking state
[   32.676994] br-lan: port 1(eth1) entered disabled state
[   32.682813] device eth1 entered promiscuous mode
[   32.745846] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   32.865455] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   34.969935] eth0: link up (100Mbps/Full duplex)
[   34.973056] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   54.288475] done.
[   54.289006] jffs2: notice: (1141) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  128.638446] random: crng init done

Dzięki za informację. Na razie mam 710N, którego chciał bym wskrzesić, tam chyba nie trzeba wylutowywać żeby wgrać boot, chyba, że się mylę ?

TL-WR841N v13
Wszystkie modele 841 mają anteny na stałe.

Witam, A jest w ogóle jakaś alternatywa na ten router w wersji v13. Z tego co się orientuje to jest na procesorze Mediatek i 8mb Flash.

Dzięki za info, ale ja mam ten config jakoś inaczej skonstruowany
P.S. Instalujesz softy  na win 7?

Tak tylko nie wiem czym ( jakim programem mam mu podać na rs ).

Upgrade firmware options:
   e - upgrade firmware over ethernet
   s - upgrade firmware over serial port
your choice: e - upgrade firmware over ethernet

trying dhcp protocol...... OK
resolved mac address 6C:3B:6B:7D:F5:22
Gateway: 192.168.2.1
********************************************************************************                               ********************************************************************************                                      falling back to small packet size

A da się wgrać po serial porcie? Jeżeli tak to jakim programem jestem w stanie to zrobić w windowsie?

Kombinuję jak koń pod górę Udało mi sie odpalić jakieś tam openwrt jako metarouter, i chciałbym teraz w grać do flash na stałe obraz LEDE zamiast oryginalnego oprogramowania MT. Jestem w stanie to zrobić z poziomu metaroutera? Bo za żadne światy nie chce mi zassać softu w trybie serwisowym.