Jak skasowałem plik wireless to nie mam w ogole radia3
Strony Poprzednia 1 2 3 4 Następna
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez marek445
Strony Poprzednia 1 2 3 4 Następna
Jak skasowałem plik wireless to nie mam w ogole radia3
kontynuacja loga
Tue Nov 7 19:53:13 2023 daemon.notice ksmbd: Starting Ksmbd userspace service.
Tue Nov 7 19:53:13 2023 daemon.notice hostapd: Set new config for phy phy0: /var/run/hostapd-phy0.conf
Tue Nov 7 19:53:13 2023 daemon.notice hostapd: Restart interface for phy phy0
Tue Nov 7 19:53:13 2023 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=US ieee80211d=1 hw_mode=g supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 120 240 beacon_int=100 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] channel=acs_survey interface=phy0-ap0 bssid=64:64:4a:a0:7c:dc ctrl_interface=/var/run/hostapd ap_isolate=1 bss_load_update_period=60 chan_util_avg_period=600 disassoc_low_ack=1 skip_inactivity_poll=0 preamble=1 wmm_enabled=1 ignore_broadcast_ssid=0 uapsd_advertisement_enabled=1 utf8_ssid=1 multi_ap=0 wpa_passphrase=gutek_45 wpa_psk_file=/var/run/hostapd-phy0-ap0.psk eapol_version=1 auth_algs=1 wpa=3 wpa_pairwise=CCMP ssid=DomN bridge=br-lan wds_bridge= snoop_iface=br-lan wpa_disable_eapol_key_retries=0 wpa_key_mgmt=WPA-PSK okc=0 disable_pmksa_caching=1 dynamic_vlan=0 vlan_naming=1 vlan_no_bridge=1 vlan_file=/
Tue Nov 7 19:53:13 2023 kern.info kernel: [ 16.906659] br-lan: port 6(phy0-ap0) entered blocking state
Tue Nov 7 19:53:13 2023 kern.info kernel: [ 16.906703] br-lan: port 6(phy0-ap0) entered disabled state
Tue Nov 7 19:53:13 2023 kern.info kernel: [ 16.911250] device phy0-ap0 entered promiscuous mode
Tue Nov 7 19:53:14 2023 kern.warn kernel: [ 17.895873] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.902871] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410'
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.902913] ath10k_pci 0001:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.908629] ath10k_pci 0001:01:00.0: wmi print 'alloc rem: 25560 iram: 24780'
Tue Nov 7 19:53:14 2023 kern.warn kernel: [ 17.956297] ath10k_pci 0001:01:00.0: pdev param 0 not supported by firmware
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.961378] ath10k_pci 0001:01:00.0: rts threshold -1
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.962346] br-lan: port 6(phy0-ap0) entered blocking state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.967292] br-lan: port 6(phy0-ap0) entered forwarding state
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy0-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy0-ap0: interface state COUNTRY_UPDATE->ACS
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy0-ap0: ACS-STARTED
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.973046] br-lan: port 6(phy0-ap0) entered disabled state
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: Restart interface for phy phy1
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=US ieee80211d=1 ieee80211h=1 hw_mode=a beacon_int=100 tx_queue_data2_burst=2.0 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=-6 vht_capab=[RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][SOUNDING-DIMENSION-4][BF-ANTENNA-4][VHT160-80PLUS80][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7] channel=acs_survey interface=phy1-ap0 bssid=64:64:4a:a0:7c:d9 ctrl_interface=/var/run/hostapd ap_isolate=1 bss_load_update_period=60 chan_util_avg_period=600 disassoc_low_ack=1 skip_inactivity_poll=0 preamble=1 wmm_enabled=1 ignore_broadcast_ssid=0 uapsd_advertisement_enabled=1 utf8_ssid=1 multi_ap=0 wpa_passph
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.005524] br-lan: port 7(phy1-ap0) entered blocking state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.005561] br-lan: port 7(phy1-ap0) entered disabled state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.010131] device phy1-ap0 entered promiscuous mode
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.029161] br-lan: port 7(phy1-ap0) entered blocking state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.029209] br-lan: port 7(phy1-ap0) entered forwarding state
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy1-ap0: interface state COUNTRY_UPDATE->ACS
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy1-ap0: ACS-STARTED
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: Set new config for phy phy2: /var/run/hostapd-phy2.conf
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: Restart interface for phy phy2
Tue Nov 7 19:53:14 2023 daemon.notice netifd: bridge 'br-lan' link is up
Tue Nov 7 19:53:14 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.034968] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=US ieee80211d=1 hw_mode=g supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 120 240 beacon_int=100 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] ieee80211ax=1 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_info_txop_request=0 he_mu_edca_ac_be_aifsn=8 he_mu_edca_ac_be_aci=0 he_mu_edca_ac_be_ecwmin=9 he_mu_edca_ac_be_ecwmax=10 he_mu_edca_ac_be_timer=255 he_mu_edca_ac_bk_aifsn=15 he_mu_edca_ac_bk_aci=1 he_mu_edca_ac_bk_ecwmin=9 he_mu_edca_ac_bk_ecwmax=10 he_mu_edca_ac_bk_timer=255 he_mu_edca_ac_vi_ecwmin=5 he_mu_edca_ac_vi_ecwmax=7 he_mu_edca_ac_vi_aifsn=5 he
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.057354] br-lan: port 8(phy2-ap0) entered blocking state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.057395] br-lan: port 8(phy2-ap0) entered disabled state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.061966] device phy2-ap0 entered promiscuous mode
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy2-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.076654] br-lan: port 8(phy2-ap0) entered blocking state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.076699] br-lan: port 8(phy2-ap0) entered forwarding state
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy2-ap0: interface state COUNTRY_UPDATE->ACS
Tue Nov 7 19:53:14 2023 daemon.notice hostapd: phy2-ap0: ACS-STARTED
Tue Nov 7 19:53:14 2023 daemon.notice netifd: Wireless device 'radio0' is now up
Tue Nov 7 19:53:14 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Tue Nov 7 19:53:14 2023 daemon.notice netifd: Wireless device 'radio2' is now up
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.314117] nss-dp 3a001800.dp5 wan: PHY Link up speed: 1000
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.314203] br-lan: port 5(wan) entered blocking state
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 18.318858] br-lan: port 5(wan) entered forwarding state
Tue Nov 7 19:53:14 2023 daemon.notice netifd: Network device 'wan' link is up
Tue Nov 7 19:53:15 2023 kern.info kernel: [ 19.032922] br-lan: port 7(phy1-ap0) entered disabled state
Tue Nov 7 19:53:15 2023 kern.info kernel: [ 19.033256] br-lan: port 8(phy2-ap0) entered disabled state
Tue Nov 7 19:53:15 2023 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Tue Nov 7 19:53:15 2023 daemon.notice ksmbd: Starting Ksmbd userspace service.
Tue Nov 7 19:53:15 2023 kern.warn kernel: [ 19.316067] ksmbd: The ksmbd server is experimental, use at your own risk.
Tue Nov 7 19:53:16 2023 user.info adblock-4.1.5[2559]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Tue Nov 7 19:53:16 2023 kern.info kernel: [ 20.165817] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 1000
Tue Nov 7 19:53:16 2023 kern.info kernel: [ 20.165902] br-lan: port 1(lan1) entered blocking state
Tue Nov 7 19:53:16 2023 kern.info kernel: [ 20.170555] br-lan: port 1(lan1) entered forwarding state
Tue Nov 7 19:53:16 2023 daemon.notice netifd: Network device 'lan1' link is up
Tue Nov 7 20:16:46 2023 daemon.notice netifd: Network device 'lan1' link is down
Tue Nov 7 20:16:46 2023 kern.info kernel: [ 21.194329] nss-dp 3a001600.dp4 lan1: PHY Link is down
Tue Nov 7 20:16:46 2023 kern.info kernel: [ 21.194595] br-lan: port 1(lan1) entered disabled state
Tue Nov 7 20:16:47 2023 kern.info kernel: [ 22.235376] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 10
Tue Nov 7 20:16:47 2023 kern.info kernel: [ 22.235471] br-lan: port 1(lan1) entered blocking state
Tue Nov 7 20:16:47 2023 kern.info kernel: [ 22.239793] br-lan: port 1(lan1) entered forwarding state
Tue Nov 7 20:16:47 2023 daemon.notice netifd: Network device 'lan1' link is up
Tue Nov 7 20:16:48 2023 daemon.info procd: - init complete -
Tue Nov 7 20:16:48 2023 daemon.notice hostapd: phy1-ap0: ACS-COMPLETED freq=5785 channel=157
Tue Nov 7 20:16:48 2023 daemon.notice hostapd: phy1-ap0: interface state ACS->HT_SCAN
Tue Nov 7 20:16:48 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:16:48 2023 kern.info kernel: [ 23.073462] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
Tue Nov 7 20:16:48 2023 kern.info kernel: [ 23.073640] br-lan: port 7(phy1-ap0) entered blocking state
Tue Nov 7 20:16:48 2023 kern.info kernel: [ 23.078894] br-lan: port 7(phy1-ap0) entered forwarding state
Tue Nov 7 20:16:48 2023 daemon.notice netifd: Network device 'phy1-ap0' link is up
Tue Nov 7 20:16:48 2023 daemon.notice hostapd: phy1-ap0: interface state HT_SCAN->ENABLED
Tue Nov 7 20:16:48 2023 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Tue Nov 7 20:16:52 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:16:54 2023 daemon.notice hostapd: phy2-ap0: ACS-COMPLETED freq=2437 channel=6
Tue Nov 7 20:16:54 2023 daemon.notice hostapd: phy2-ap0: interface state ACS->HT_SCAN
Tue Nov 7 20:16:56 2023 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=6 sec=10 based on overlapping BSSes
Tue Nov 7 20:16:56 2023 daemon.notice hostapd: Fallback to 20 MHz
Tue Nov 7 20:16:56 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:16:56 2023 kern.info kernel: [ 30.861783] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
Tue Nov 7 20:16:56 2023 kern.info kernel: [ 30.861966] br-lan: port 8(phy2-ap0) entered blocking state
Tue Nov 7 20:16:56 2023 kern.info kernel: [ 30.867238] br-lan: port 8(phy2-ap0) entered forwarding state
Tue Nov 7 20:16:56 2023 daemon.notice netifd: Network device 'phy2-ap0' link is up
Tue Nov 7 20:16:56 2023 daemon.notice hostapd: phy2-ap0: interface state HT_SCAN->ENABLED
Tue Nov 7 20:16:56 2023 daemon.notice hostapd: phy2-ap0: AP-ENABLED
Tue Nov 7 20:16:57 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 7 20:16:57 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 7 20:16:57 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Nov 7 20:16:57 2023 daemon.info hostapd: phy2-ap0: STA a0:36:bc:0d:62:3f IEEE 802.11: authenticated
Tue Nov 7 20:16:57 2023 daemon.info hostapd: phy2-ap0: STA a0:36:bc:0d:62:3f IEEE 802.11: associated (aid 1)
Tue Nov 7 20:16:58 2023 daemon.notice hostapd: phy2-ap0: AP-STA-CONNECTED a0:36:bc:0d:62:3f auth_alg=open
Tue Nov 7 20:16:58 2023 daemon.info hostapd: phy2-ap0: STA a0:36:bc:0d:62:3f WPA: pairwise key handshake completed (RSN)
Tue Nov 7 20:16:58 2023 daemon.notice hostapd: phy2-ap0: EAPOL-4WAY-HS-COMPLETED a0:36:bc:0d:62:3f
Tue Nov 7 20:16:58 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 7 20:16:58 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 7 20:16:58 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 7 20:16:59 2023 kern.info kernel: [ 33.752838] l11: disabling
Tue Nov 7 20:17:00 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:17:02 2023 daemon.notice hostapd: phy0-ap0: ACS-COMPLETED freq=2442 channel=7
Tue Nov 7 20:17:02 2023 daemon.notice hostapd: phy0-ap0: interface state ACS->HT_SCAN
Tue Nov 7 20:17:05 2023 daemon.info hostapd: phy2-ap0: STA 7c:a7:b0:15:d5:18 IEEE 802.11: authenticated
Tue Nov 7 20:17:05 2023 daemon.info hostapd: phy2-ap0: STA 7c:a7:b0:15:d5:18 IEEE 802.11: associated (aid 2)
Tue Nov 7 20:17:05 2023 daemon.notice hostapd: phy2-ap0: AP-STA-CONNECTED 7c:a7:b0:15:d5:18 auth_alg=open
Tue Nov 7 20:17:05 2023 daemon.info hostapd: phy2-ap0: STA 7c:a7:b0:15:d5:18 WPA: pairwise key handshake completed (RSN)
Tue Nov 7 20:17:05 2023 daemon.notice hostapd: phy2-ap0: EAPOL-4WAY-HS-COMPLETED 7c:a7:b0:15:d5:18
Tue Nov 7 20:17:06 2023 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=7 sec=11 based on overlapping BSSes
Tue Nov 7 20:17:06 2023 daemon.notice hostapd: Fallback to 20 MHz
Tue Nov 7 20:17:06 2023 kern.info kernel: [ 40.483689] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
Tue Nov 7 20:17:06 2023 kern.info kernel: [ 40.483874] br-lan: port 6(phy0-ap0) entered blocking state
Tue Nov 7 20:17:06 2023 kern.info kernel: [ 40.489131] br-lan: port 6(phy0-ap0) entered forwarding state
Tue Nov 7 20:17:06 2023 daemon.notice netifd: Network device 'phy0-ap0' link is up
Tue Nov 7 20:17:06 2023 daemon.notice hostapd: phy0-ap0: interface state HT_SCAN->ENABLED
Tue Nov 7 20:17:06 2023 daemon.notice hostapd: phy0-ap0: AP-ENABLED
Tue Nov 7 20:17:38 2023 daemon.info hostapd: phy1-ap0: STA 12:a4:3f:54:f4:dc IEEE 802.11: authenticated
Tue Nov 7 20:17:38 2023 daemon.info hostapd: phy1-ap0: STA 12:a4:3f:54:f4:dc IEEE 802.11: associated (aid 1)
Tue Nov 7 20:17:38 2023 daemon.notice hostapd: phy1-ap0: STA-OPMODE-SMPS-MODE-CHANGED 12:a4:3f:54:f4:dc off
Tue Nov 7 20:17:38 2023 daemon.notice hostapd: phy1-ap0: AP-STA-CONNECTED 12:a4:3f:54:f4:dc auth_alg=open
Tue Nov 7 20:17:38 2023 daemon.info hostapd: phy1-ap0: STA 12:a4:3f:54:f4:dc WPA: pairwise key handshake completed (RSN)
Tue Nov 7 20:17:38 2023 daemon.notice hostapd: phy1-ap0: EAPOL-4WAY-HS-COMPLETED 12:a4:3f:54:f4:dc
Tue Nov 7 20:17:38 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:17:41 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:17:41 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:17:41 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:17:42 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:17:43 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:17:44 2023 daemon.info hostapd: phy1-ap0: STA b8:3b:cc:51:95:6b IEEE 802.11: authenticated
Tue Nov 7 20:17:44 2023 daemon.info hostapd: phy1-ap0: STA b8:3b:cc:51:95:6b IEEE 802.11: associated (aid 2)
Tue Nov 7 20:17:44 2023 daemon.notice hostapd: phy1-ap0: AP-STA-CONNECTED b8:3b:cc:51:95:6b auth_alg=open
Tue Nov 7 20:17:44 2023 daemon.info hostapd: phy1-ap0: STA b8:3b:cc:51:95:6b WPA: pairwise key handshake completed (RSN)
Tue Nov 7 20:17:44 2023 daemon.notice hostapd: phy1-ap0: EAPOL-4WAY-HS-COMPLETED b8:3b:cc:51:95:6b
Tue Nov 7 20:17:44 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:17:46 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:17:48 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:17:51 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:18:06 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:18:52 2023 daemon.info hostapd: phy1-ap0: STA 02:8c:52:fb:7c:84 IEEE 802.11: authenticated
Tue Nov 7 20:18:52 2023 daemon.info hostapd: phy1-ap0: STA 02:8c:52:fb:7c:84 IEEE 802.11: associated (aid 3)
Tue Nov 7 20:18:52 2023 daemon.notice hostapd: phy1-ap0: AP-STA-CONNECTED 02:8c:52:fb:7c:84 auth_alg=open
Tue Nov 7 20:18:52 2023 daemon.info hostapd: phy1-ap0: STA 02:8c:52:fb:7c:84 WPA: pairwise key handshake completed (RSN)
Tue Nov 7 20:18:52 2023 daemon.notice hostapd: phy1-ap0: EAPOL-4WAY-HS-COMPLETED 02:8c:52:fb:7c:84
Tue Nov 7 20:18:53 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:19:06 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:20:21 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:20:31 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:20:43 2023 daemon.err uhttpd[2847]: [info] luci: accepted login on /admin/network/wireless for root from 192.168.1.126
Tue Nov 7 20:21:22 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:21:41 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:22:34 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:24:45 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.box
Tue Nov 7 20:26:04 2023 daemon.warn odhcpd[2636]: No default route present, overriding ra_lifetime!
Tue Nov 7 20:28:57 2023 authpriv.info dropbear[4747]: Child connection from 192.168.1.126:52777
Tue Nov 7 20:29:02 2023 authpriv.notice dropbear[4747]: Password auth succeeded for 'root' from 192.168.1.126:52777
Tue Nov 7 20:29:06 2023 daemon.warn dnsmasq[1]: possible DNS-rebind attack detected: wpad.fritz.boxTo cały log
kontynuacja loga
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.878883] usbcore: registered new interface driver sierra
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.883981] usbserial: USB Serial support registered for Sierra USB modem
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.888203] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.898061] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.905230] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.920540] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x50.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.921976] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.923155] ath10k_pci 0001:01:00.0: enabling device (0000 -> 0002)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.939795] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.954984] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.981664] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.007983] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.034475] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.060787] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.086409] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.115625] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.147248] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.176216] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.208571] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.235384] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.263965] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.296088] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 10.327705] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 10.748489] ath10k_pci 0001:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 10.748541] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 10.756802] ath10k_pci 0001:01:00.0: firmware ver 10.1-ct-87-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 61a92df5
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 10.792136] ath10k_pci 0001:01:00.0: Loading BDF type 0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 10.792340] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id N/A crc32 dfee0d28
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 11.662764] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.669782] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410'
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.669901] ath10k_pci 0001:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.675639] ath10k_pci 0001:01:00.0: wmi print 'alloc rem: 25560 iram: 24780'
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.723214] ath10k_pci 0001:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal nvmem max-sta 128 raw 0 hwcrypto 1
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.723549] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 11.836427] ath: EEPROM regdomain: 0x0
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 11.836444] ath: EEPROM indicates default country code should be used
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 11.836447] ath: doing EEPROM country->regdmn map search
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 11.836452] ath: country maps to regdmn code: 0x3a
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 11.836456] ath: Country alpha2 being used: US
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 11.836460] ath: Regpair used: 0x3a
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.847178] ath11k c000000.wifi: ipq8074 hw2.0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.847212] ath11k c000000.wifi: FW memory mode: 0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.850786] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 11.855441] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 12.997736] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.001227] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.004298] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.012379] ath11k_pci 0000:01:00.0: MSI vectors: 16
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.018118] ath11k_pci 0000:01:00.0: qcn9074 hw1.0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.023303] ath11k_pci 0000:01:00.0: FW memory mode: 2
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 13.042508] ath11k c000000.wifi: qmi ignore invalid mem req type 3
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.048961] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.048991] ath11k c000000.wifi: fw_version 0x290c84a5 fw_build_timestamp 2023-03-25 07:34 fw_build_id WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.185113] mhi mhi0: Requested to power ON
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.185381] mhi mhi0: Power on setup success
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 13.369728] ath11k c000000.wifi: htt event 48 not handled
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.812837] mhi mhi0: Wait for device to enter SBL or Mission mode
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.863758] usbcore: registered new interface driver cdc_mbim
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.866167] usbcore: registered new interface driver option
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.868557] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.876724] usbcore: registered new interface driver qcserial
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.880938] usbserial: USB Serial support registered for Qualcomm USB modem
Tue Nov 7 19:53:10 2023 user.info kernel: [ 13.887206] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.894844] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 13.900442] ath11k_pci 0000:01:00.0: fw_version 0x290c8569 fw_build_timestamp 2023-03-25 06:50 fw_build_id
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 13.966813] ath11k_pci 0000:01:00.0: failed to fetch board data for bus=pci,qmi-chip-id=0,qmi-board-id=255,variant=Xiaomi-AX9000 from ath11k/QCN9074/hw1.0/board-2.bin
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 13.966874] ath11k_pci 0000:01:00.0: failed to fetch board data for bus=pci,qmi-chip-id=0,qmi-board-id=255 from ath11k/QCN9074/hw1.0/board-2.bin
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 13.980657] ath11k_pci 0000:01:00.0: failed to fetch board.bin from QCN9074/hw1.0
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 13.993752] ath11k_pci 0000:01:00.0: qmi failed to fetch board file: -12
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 14.001067] ath11k_pci 0000:01:00.0: failed to load board data file: -12
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 14.111002] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf
Tue Nov 7 19:53:10 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating providers.cnf
Tue Nov 7 19:53:10 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Nov 7 19:53:10 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Nov 7 19:53:11 2023 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Nov 7 19:53:11 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 7 19:53:11 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 7 19:53:11 2023 authpriv.info dropbear[2186]: Not backgrounding
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: bonding
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: 8021ad
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: 8021q
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: macvlan
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: veth
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: bridge
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: Network device
Tue Nov 7 19:53:11 2023 user.notice : Added device handler type: tunnel
Tue Nov 7 19:53:11 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: uci: Entry not found
Tue Nov 7 19:53:11 2023 daemon.notice wpa_supplicant[2321]: Successfully initialized wpa_supplicant
Tue Nov 7 19:53:12 2023 user.info adblock-4.1.5[2559]: backup directory '/tmp/adblock-Backup' created
Tue Nov 7 19:53:12 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 15.995031] br-lan: port 1(lan1) entered blocking state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 15.995081] br-lan: port 1(lan1) entered disabled state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 15.999310] device lan1 entered promiscuous mode
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'lan' is enabled
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'lan' is setting up now
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'lan' is now up
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.014172] br-lan: port 2(lan2) entered blocking state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.014216] br-lan: port 2(lan2) entered disabled state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.018445] device lan2 entered promiscuous mode
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.030460] br-lan: port 3(lan3) entered blocking state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.030502] br-lan: port 3(lan3) entered disabled state
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.034795] device lan3 entered promiscuous mode
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.046818] br-lan: port 4(lan4) entered blocking state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.046862] br-lan: port 4(lan4) entered disabled state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.051083] device lan4 entered promiscuous mode
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Tue Nov 7 19:53:12 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Nov 7 19:53:12 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.272664] br-lan: port 5(wan) entered blocking state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.272706] br-lan: port 5(wan) entered disabled state
Tue Nov 7 19:53:12 2023 kern.info kernel: [ 16.277011] device wan entered promiscuous mode
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'loopback' is enabled
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'loopback' is now up
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Network device 'lo' link is up
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio1 (3361): WARNING: Variable 'data' does not exist or is not an array/object
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio2 (3362): WARNING: Variable 'data' does not exist or is not an array/object
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio0 (3360): WARNING: Variable 'data' does not exist or is not an array/object
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio3 (3364): WARNING: Variable 'data' does not exist or is not an array/object
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio3 (3364): Phy not found
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio3 (3364): Could not find PHY for device 'radio3'
Tue Nov 7 19:53:12 2023 daemon.notice hostapd: Set new config for phy phy2:
Tue Nov 7 19:53:12 2023 daemon.notice wpa_supplicant[2321]: Set new config for phy phy2
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Wireless device 'radio3' set retry=0
Tue Nov 7 19:53:12 2023 daemon.crit netifd: Wireless device 'radio3' setup failed, retry=0
Tue Nov 7 19:53:12 2023 daemon.notice hostapd: Set new config for phy phy1:
Tue Nov 7 19:53:12 2023 daemon.notice wpa_supplicant[2321]: Set new config for phy phy1
Tue Nov 7 19:53:12 2023 daemon.notice hostapd: Set new config for phy phy0:
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio3 (3425): WARNING: Variable 'data' does not exist or is not an array/object
Tue Nov 7 19:53:12 2023 daemon.notice netifd: radio3 (3425): Bug: PHY is undefined for device 'radio3'
Tue Nov 7 19:53:12 2023 daemon.notice netifd: Wireless device 'radio3' is now down
Tue Nov 7 19:53:12 2023 daemon.notice wpa_supplicant[2321]: Set new config for phy phy0
Tue Nov 7 19:53:12 2023 daemon.notice ksmbd: Stopping Ksmbd userspace service.
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using nameserver 192.168.1.1#53
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 7 19:53:13 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 7 19:53:13 2023 daemon.notice netifd: radio2 (3362): sh: acs_survey: out of range
Tue Nov 7 19:53:13 2023 daemon.notice netifd: radio0 (3360): sh: acs_survey: out of range
Tue Nov 7 19:53:13 2023 daemon.notice netifd: radio0 (3360): sh: acs_survey: out of range
Tue Nov 7 19:53:13 2023 daemon.notice netifd: radio2 (3362): sh: acs_survey: out of range
Tue Nov 7 19:53:13 2023 daemon.notice wpa_supplicant[2321]: Set new config for phy phy1
Tue Nov 7 19:53:13 2023 daemon.notice wpa_supplicant[2321]: Set new config for phy phy0
Tue Nov 7 19:53:13 2023 kern.warn kernel: [ 16.860695] ksmbd: The ksmbd server is experimental, use at your own risk.
Tue Nov 7 19:53:13 2023 daemon.notice wpa_supplicant[2321]: Set new config for phy phy2
Tue Nov 7 19:53:13 2023 daemon.notice ksmbd: Starting Ksmbd userspace service.
Tue Nov 7 19:53:13 2023 daemon.notice hostapd: Set new config for phy phy0: /var/run/hostapd-phy0.conf
Tue Nov 7 19:53:13 2023 daemon.notice hostapd: Restart interface for phy phy0
Tue Nov 7 19:53:13 2023 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=US ieee80211d=1 hw_mode=g supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 120 240 beacon_int=100 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] channel=acs_survey interface=phy0-ap0 bssid=64:64:4a:a0:7c:dc ctrl_interface=/var/run/hostapd ap_isolate=1 bss_load_update_period=60 chan_util_avg_period=600 disassoc_low_ack=1 skip_inactivity_poll=0 preamble=1 wmm_enabled=1 ignore_broadcast_ssid=0 uapsd_advertisement_enabled=1 utf8_ssid=1 multi_ap=0 wpa_passphrase=gutek_45 wpa_psk_file=/var/run/hostapd-phy0-ap0.psk eapol_version=1 auth_algs=1 wpa=3 wpa_pairwise=CCMP ssid=DomN bridge=br-lan wds_bridge= snoop_iface=br-lan wpa_disable_eapol_key_retries=0 wpa_key_mgmt=WPA-PSK okc=0 disable_pmksa_caching=1 dynamic_vlan=0 vlan_naming=1 vlan_no_bridge=1 vlan_file=/
Tue Nov 7 19:53:13 2023 kern.info kernel: [ 16.906659] br-lan: port 6(phy0-ap0) entered blocking state
Tue Nov 7 19:53:13 2023 kern.info kernel: [ 16.906703] br-lan: port 6(phy0-ap0) entered disabled state
Tue Nov 7 19:53:13 2023 kern.info kernel: [ 16.911250] device phy0-ap0 entered promiscuous mode
Tue Nov 7 19:53:14 2023 kern.warn kernel: [ 17.895873] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
Tue Nov 7 19:53:14 2023 kern.info kernel: [ 17.902871] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410'kontynuacja loga
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.100985] sdhci: Secure Digital Host Controller Interface driver
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.101025] sdhci: Copyright(c) Pierre Ossman
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.106096] sdhci-pltfm: SDHCI platform and OF driver helper
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.114042] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.119009] NET: Registered PF_INET6 protocol family
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.122977] Segment Routing with IPv6
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.127101] In-situ OAM (IOAM) with IPv6
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.130695] NET: Registered PF_PACKET protocol family
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.134683] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.139715] 8021q: 802.1Q VLAN Support v1.8
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.170571] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.170899] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.176918] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.183308] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.190960] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.198475] cpr3_mem_acc_init: apc: not using memory accelerator regulator
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.207610] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 712000 uV
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.214559] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 848000 uV
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.224540] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 912000 uV
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.234350] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1000000 uV
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.244208] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 658, quot_offset[ 7]= 0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.253969] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 907, quot_offset[ 7]= 245
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.264820] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1010, quot_offset[ 7]= 100
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.275756] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1161, quot_offset[ 7]= 150
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.286833] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.289569] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.305494] remoteproc remoteproc0: cd00000.q6v5_wcss is available
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 2.315508] ubi0: attaching mtd21
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 2.942803] random: crng init done
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.134725] ubi0: scanning is finished
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.141437] ubi0: attached mtd21 (name "rootfs", size 182 MiB)
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.141476] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.146177] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.153028] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.159881] ubi0: good PEBs: 1460, bad PEBs: 0, corrupted PEBs: 0
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.166654] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.172907] ubi0: max/mean erase counter: 10/2, WL threshold: 4096, image sequence number: 1996085608
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.180025] ubi0: available PEBs: 0, total reserved PEBs: 1460, PEBs reserved for bad PEB handling: 40
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 3.189325] ubi0: background thread "ubi_bgt0d" started, PID 545
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 3.199066] block ubiblock0_0: created from ubi0:0(rootfs)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 3.207838] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 3.208233] Freeing unused kernel memory: 1280K
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 3.262985] Run /sbin/init as init process
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 3.263006] with arguments:
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 3.263009] /sbin/init
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 3.263012] with environment:
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 3.263015] HOME=/
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 3.263017] TERM=linux
Tue Nov 7 19:53:10 2023 kern.debug kernel: [ 3.263020] uart_en=1
Tue Nov 7 19:53:10 2023 user.info kernel: [ 3.425860] init: Console is alive
Tue Nov 7 19:53:10 2023 user.info kernel: [ 3.425987] init: - watchdog -
Tue Nov 7 19:53:10 2023 user.info kernel: [ 4.114856] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.223861] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.223975] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.230334] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.236346] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.243619] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.251078] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0xb
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.257762] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xc
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.263231] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xff
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.269143] ssdk_dt_parse_phy_info[716]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.274811] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.282291] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC 64:64:4a:a0:7c:d8
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.287855] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC 64:64:4a:a0:7c:d8
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.294442] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC 64:64:4a:a0:7c:d8
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.300946] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC 64:64:4a:a0:7c:d8
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.307461] ssdk_dt_parse_intf_mac[942]:INFO:dp5 MAC 64:64:4a:59:5a:68
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.313983] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.433794] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.436409] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.485927] qca808x_phy_api_ops_init[2566]:INFO:qca probe qca808x phy driver succeeded!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.496682] regi_init[3953]:INFO:Initializing HPPE!!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.732797] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 4.736298] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.438920] adpt_hppe_port_mux_mac_type_set[2787]:WARN:port 6 need not to configure mux and mac type
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.438984] ssdk_switch_register[2017]:INFO:Chip version 0x1500
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.447126] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.452755] ssdk_switch_register[2043]:INFO:polling is selected
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.461096] regi_init[3957]:INFO:Initializing HPPE Done!!
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.466813] ssdk_genl_init[211]:INFO:ssdk genl family register success.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 5.472289] regi_init[4020]:INFO:qca-ssdk module init succeeded!
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.480934] EDMA ver 1 hw init
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.485207] EDMA HW Reset completed succesfully
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.487850] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.492245] RxDesc:1 (15-15) RxFill:1 (7-7)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.498551] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.502179] nss-dp 3a001000.dp1 lan4: Registered netdev lan4(qcom-id:1)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.512210] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.518314] nss-dp 3a001200.dp2 lan3: Registered netdev lan3(qcom-id:2)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.528294] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.534438] nss-dp 3a001400.dp3 lan2: Registered netdev lan2(qcom-id:3)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.544437] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.550532] nss-dp 3a001600.dp4 lan1: Registered netdev lan1(qcom-id:4)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.766117] QCA808X ethernet 90000.mdio-1:18: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:18, irq=POLL)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.766667] nss-dp 3a001800.dp5 wan: Registered netdev wan(qcom-id:5)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.775172] **********************************************************
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.781519] * NSS Data Plane driver
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.787946] **********************************************************
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.799673] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.799727] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.804233] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.811651] xhci-hcd xhci-hcd.1.auto: irq 92, io mem 0x08a00000
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.821093] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.826897] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.832449] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.840339] hub 1-0:1.0: USB hub found
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.846668] hub 1-0:1.0: 1 port detected
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.850667] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.854856] hub 2-0:1.0: USB hub found
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.862513] hub 2-0:1.0: 1 port detected
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.868590] usbcore: registered new interface driver usb-storage
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 5.870713] usbcore: registered new interface driver uas
Tue Nov 7 19:53:10 2023 user.info kernel: [ 5.876348] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Nov 7 19:53:10 2023 user.info kernel: [ 5.882803] init: - preinit -
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 7.273924] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 1000
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 7.274003] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.293736] mount_root: loading kmods from internal overlay
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.304864] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.305884] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 8.313544] nss-dp 3a001600.dp4 lan1: PHY Link is down
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 8.345212] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.416448] UBIFS (ubi0:1): Mounting in unauthenticated mode
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.416575] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 794
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.450522] UBIFS (ubi0:1): recovery needed
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.524815] UBIFS (ubi0:1): recovery completed
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.524928] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.528159] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.536078] UBIFS (ubi0:1): FS size: 165449728 bytes (157 MiB, 1303 LEBs), max 1315 LEBs, journal size 8253440 bytes (7 MiB, 65 LEBs)
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.545970] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.557941] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 34B9092A-6DA6-4797-964F-2D5B6FAAA865, small LPT model
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.565283] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.580302] block: extroot: not configured
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.582700] UBIFS (ubi0:1): un-mount UBI device 0
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.586896] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.594337] UBIFS (ubi0:1): Mounting in unauthenticated mode
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.597690] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 797
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.664500] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.664543] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.671323] UBIFS (ubi0:1): FS size: 165449728 bytes (157 MiB, 1303 LEBs), max 1315 LEBs, journal size 8253440 bytes (7 MiB, 65 LEBs)
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.681237] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 8.693198] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 34B9092A-6DA6-4797-964F-2D5B6FAAA865, small LPT model
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.702952] mount_root: loading kmods from internal overlay
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.720209] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.721311] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 8.731141] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.755203] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.757712] block: extroot: not configured
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.762389] mount_root: switching to ubifs overlay
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 8.770651] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Tue Nov 7 19:53:10 2023 user.warn kernel: [ 8.773941] urandom-seed: Seeding with /etc/urandom.seed
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.812962] procd: - early -
Tue Nov 7 19:53:10 2023 user.info kernel: [ 8.813070] procd: - watchdog -
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.339491] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 user.info kernel: [ 9.350695] procd: - watchdog -
Tue Nov 7 19:53:10 2023 user.info kernel: [ 9.352439] procd: - ubus -
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.375722] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.404623] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 user.info kernel: [ 9.405299] procd: - init -
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.443225] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.511067] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.549382] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.577848] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.610679] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.638643] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 user.info kernel: [ 9.647215] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.667203] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.684552] tun: Universal TUN/TAP device driver, 1.6
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.689416] ksmbd: The ksmbd server is experimental, use at your own risk.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.691527] ntfs3: Max link count 4000
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.695526] ntfs3: Enabled Linux POSIX ACLs support
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.698307] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.704085] usbcore: registered new interface driver cdc_acm
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.712922] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.719721] usbcore: registered new interface driver cdc_wdm
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.727227] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.728653] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.732427] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
Tue Nov 7 19:53:10 2023 user.info kernel: [ 9.745534] urngd: v1.0.2 started.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.762489] NET: Registered PF_QIPCRTR protocol family
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.765671] usbcore: registered new interface driver usblp
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.768817] usbcore: registered new interface driver usbserial_generic
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.772064] usbserial: USB Serial support registered for generic
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.776230] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.784980] usbcore: registered new interface driver cdc_ether
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.794377] usbcore: registered new interface driver cdc_ncm
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.820566] usbcore: registered new interface driver huawei_cdc_ncm
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.830095] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.855161] PPP generic driver version 2.4.2
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.856040] NET: Registered PF_PPPOX protocol family
Tue Nov 7 19:53:10 2023 kern.warn kernel: [ 9.858143] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.863836] usbcore: registered new interface driver qmi_wwan
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 9.873245] usbcore: registered new interface driver rndis_hostTak chodzi mi o radio3
root@OpenWrt:~# logread
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.619117] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622397] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622421] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622436] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622450] pci 0000:00:00.0: BAR 7: assigned [io 0x10000-0x10fff]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622467] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622521] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622533] pci 0000:00:00.0: bridge window [io 0x10000-0x10fff]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622546] pci 0000:00:00.0: bridge window [mem 0x20400000-0x205fffff]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.622558] pci 0000:00:00.0: bridge window [mem 0x20600000-0x207fffff 64bit pref]
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.624228] pcieport 0000:00:00.0: PME: Signaling with IRQ 84
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.624541] pcieport 0000:00:00.0: AER: enabled with IRQ 84
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 0.626363] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 0.626387] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.630567] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.632592] msm_serial 78b3000.serial: msm_serial: detected port #0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.632641] msm_serial 78b3000.serial: uartclk = 3686400
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.632691] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 0.632724] msm_serial: console setup on port #0
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.642082] printk: console [ttyMSM0] enabled
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.647240] msm_serial: driver initialized
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.655490] loop: module loaded
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.655561] Loading iSCSI transport class v2.0-870.
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.659992] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.662926] nand: Winbond W29N02GZ
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.669499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.673020] 22 fixed-partitions partitions found on MTD device qcom_nand.0
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 1.680303] OF: Bad cell count for /soc/nand-controller@79b0000/nand@0/partitions
Tue Nov 7 19:53:10 2023 kern.err kernel: [ 1.687202] OF: Bad cell count for /soc/nand-controller@79b0000/nand@0/partitions
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.695462] Creating 22 MTD partitions on "qcom_nand.0":
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.702146] 0x000000000000-0x000000100000 : "0:sbl1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.708987] 0x000000100000-0x000000200000 : "0:mibib"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.713740] 0x000000200000-0x000000280000 : "0:bootconfig"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.718255] 0x000000280000-0x000000300000 : "0:bootconfig1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.723657] 0x000000300000-0x000000600000 : "0:qsee"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.731045] 0x000000600000-0x000000900000 : "0:qsee_1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.736295] 0x000000900000-0x000000980000 : "0:devcfg"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.739248] 0x000000980000-0x000000a00000 : "0:devcfg_1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.744393] 0x000000a00000-0x000000a80000 : "0:apdp"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.749852] 0x000000a80000-0x000000b00000 : "0:apdp_1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.754793] 0x000000b00000-0x000000b80000 : "0:rpm"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.759725] 0x000000b80000-0x000000c00000 : "0:rpm_1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.764519] 0x000000c00000-0x000000c80000 : "0:cdt"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.769720] 0x000000c80000-0x000000d00000 : "0:cdt_1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.774418] 0x000000d00000-0x000000d80000 : "0:appsblenv"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.779618] 0x000000d80000-0x000000e80000 : "0:appsbl"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.785420] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.790408] 0x000000f80000-0x000001000000 : "0:art"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.795608] 0x000001000000-0x000001080000 : "bdata"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.800111] 0x000001080000-0x000001180000 : "pstore"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.805358] 0x000001180000-0x000004980000 : "ubi_kernel"
Tue Nov 7 19:53:10 2023 kern.notice kernel: [ 1.853532] 0x000004980000-0x000010000000 : "rootfs"
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 1.995970] mtd: setting mtd21 (rootfs) as root device
Tue Nov 7 19:53:10 2023 kern.alert kernel: [ 1.996272] mtdsplit: no squashfs found in "rootfs"
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.007895] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.011090] s1: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.012837] s2: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.016802] vdd_s3: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.021133] vdd_s4: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.025675] s5: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.030007] l1: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.034148] l2: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.038348] l3: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.042503] l4: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.046691] l5: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.050799] l6: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.055047] l7: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.059148] l8: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.063332] l9: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.067630] l11: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.071666] l12: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.076205] l13: supplied by regulator-dummy
Tue Nov 7 19:53:10 2023 kern.info kernel: [ 2.095562] i2c_dev: i2c /dev entries driverNie wydaje mi się. bo żadne urządzenie nie znajduje tego sidd. A w interfejsie mam WYłączony Sidd:
Jak wejdę w edycje to nie mogę zmienić częstotliwości, kanału itd.
root@OpenWrt:~# iw dev
phy#2
Interface phy2-ap0
ifindex 14
wdev 0x200000002
addr 64:64:4a:a0:7c:da
ssid Dom
type AP
channel 6 (2437 MHz), width: 20 MHz, center1: 2437 MHz
txpower 30.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcoltx-bytes tx-packets
0 0 1711 0 0 0 0 210958 1711
phy#1
Interface phy1-ap0
ifindex 12
wdev 0x100000002
addr 64:64:4a:a0:7c:d9
ssid Dom_5G
type AP
channel 153 (5765 MHz), width: 80 MHz, center1: 5775 MHz
txpower 30.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcoltx-bytes tx-packets
0 0 1482 0 0 0 0 186265 1482
phy#0
Interface phy0-ap0
ifindex 13
wdev 0x2
addr 64:64:4a:a0:7c:dc
ssid DomN
type AP
channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
txpower 30.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcoltx-bytes tx-packets
0 0 0 0 0 0 0 00root@OpenWrt:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.path='soc/10000000.pci/pci0001:00/0001:00:00.0/0001:01:00.0'
wireless.radio0.channel='auto'
wireless.radio0.band='2g'
wireless.radio0.htmode='HT40'
wireless.radio0.country='US'
wireless.radio0.cell_density='0'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='DomN'
wireless.default_radio0.encryption='psk-mixed'
wireless.default_radio0.key='gutek_45'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.path='platform/soc/c000000.wifi'
wireless.radio1.htmode='VHT80'
wireless.radio1.country='US'
wireless.radio1.cell_density='0'
wireless.radio1.band='5g'
wireless.radio1.channel='auto'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.network='lan'
wireless.default_radio1.mode='ap'
wireless.default_radio1.ssid='Dom_5G'
wireless.default_radio1.encryption='psk-mixed'
wireless.default_radio1.key='gutek_45'
wireless.radio2=wifi-device
wireless.radio2.type='mac80211'
wireless.radio2.path='platform/soc/c000000.wifi+1'
wireless.radio2.channel='auto'
wireless.radio2.band='2g'
wireless.radio2.htmode='HE40'
wireless.radio2.country='US'
wireless.radio2.cell_density='0'
wireless.default_radio2=wifi-iface
wireless.default_radio2.device='radio2'
wireless.default_radio2.network='lan'
wireless.default_radio2.mode='ap'
wireless.default_radio2.ssid='Dom'
wireless.default_radio2.encryption='psk-mixed'
wireless.default_radio2.key='gutek_45'
wireless.radio3=wifi-device
wireless.radio3.type='mac80211'
wireless.radio3.path='soc/20000000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
wireless.radio3.country='PL'
wireless.radio3.cell_density='0'
wireless.default_radio3=wifi-iface
wireless.default_radio3.device='radio3'
wireless.default_radio3.network='lan'
wireless.default_radio3.mode='ap'
wireless.default_radio3.ssid='Dom_G_Game'
wireless.default_radio3.encryption='psk-mixed'
wireless.default_radio3.key='gutek_45'Zrobiłem wszystko według instrukcji i webif mam
radio3 Generic unknow
Urządzenie nieaktywne
Najwidoczniej nie mam bo wywala m i coś takiego:
-ash: base64: not found
Walczę z uruchomieniem tego radia, ale nie wiem gdzie mam wkleić ten skrypt: https://textbin.net/ekk9nz46lw żeby wygenerowało mi pliki archiwum .tar.gz.
Zrobiłem tak jak napisałeś i wszystko chodzi jak trzeba. Dzięki wielkie.
Witam. Na razie odpuszczam sobie radia. Próbuję uruchomić neta po porcie wan. Tzn. mam główny router który rozgłasza internet i przydziela adresy DHCP. Ten główny router chce potępiać do portu wan ax9000. Chcę żeby router ax9000 tylko pełnił funkcję AP żeby ax9000 nie przydzielał adresów DHCP, tylko żeby robił to ten główny router. Zrobiłem to podłączając główny router do portu lan1 w ax9000, ale potrzebuje wszystkie 4 porty w ax9000. Próbuję to zrobić ale nie daje rady.
Wszystko śmiga super ale nie mogę się połączyć z radiem3. Czy mógłby ktoś podesłać mi konfigurację radiów która chodzi najlepiej? U mnie radio0 ma bardzo słaby zasięg. Na początku jak się łączy to mam transfer 433 mb/s ale po sekundzie zasięg mi spada i jest tylko 50 mb. Najlepszy zasięg mam na radiu2 i działa najstabilniej ale z prędkością 144 mb/s. Jest jakaś rada na to?
Ok dziękuję ślicznie za pomoc. Wszystko jest tak jak powinno być. Wgrałem twoją kompilacje z luci. Mam webif, wszystko gra tak jak należy. Jeszcze raz dziękuję ślicznie.
Udało mi się skopiować ten plik, w SSH robie:
cd /tmp
sysupgrade -n sysupgrade.bin
I wyskakuje mi coś takiego:
Sat Oct 28 09:22:02 CEST 2023 upgrade: Commencing upgrade. Closing all Shell sessions.
Command failed: Connection failed
Komputer pinguje.mi adres 192.168.1.1
Ok, to nie możesz mieć telnetu. Tam nie ma telnetu.
Zrób ifconfig zobacz czy masz adres 192.168.1.1. Jeżeli tak to zobacz czy z poziomu komputera możesz ten adres pingować.
Łączę się do SSH adresem 192.168.1.1 czyli router jest na adresie 192.168.1.1
Jak próbuję się połączyć winscp żeby skopiować plik sysupgrade.bin to wyskakuje mi taki błąd:
Połączenie zerwano niespodziewanie
Serwer wysłał kod wykonania polecenia 127
Nie można zainicjować protokołu sftp. Czy na hoście dzialaserwer sftp?
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='23.05-SNAPSHOT'
DISTRIB_REVISION='r23551-5368066e9b'
DISTRIB_TARGET='ipq807x/generic'
DISTRIB_ARCH='aarch64_cortex-a53'
DISTRIB_DESCRIPTION='OpenWrt 23.05-SNAPSHOT r23551-5368066e9b'
DISTRIB_TAINTS=''
Jest zainstalowane openwrt. Połączyłem się terminalem SSH i jest root@openwrt: ale za nic nie mogę skopiować pliku sysupgrade.bin bo nie mogę się połączyć winscp
Teraz mam problem z skopiowaniem pliku sysupgrade.bin do katalogu /tmp. Używam winscp ale nie mogę się połączyć. Do terminala telnet SSH normalnie się łączę pod adresem 192.168.1.1 a w winscp nie mogę sobie poradzic
TTT oznacza timeout i są to kłopoty z połączeniem. Sam plik powinien się załadować w kilka sekund ale jak masz timeouty to nie widaomo ile to będzie trwało. Trzeba było wyłączyć inne sieci, antywirusy, firewalle i co tam jeszcze masz ciekawego.
Wyłączyłem wifi i poszło od razu.
Długo trwa to ładowanie tego pliku z rozszerzeniem itb ? Bo mi już z jakieś 5 min idzie. Jak ładuje to mam takie znaki #####. Na zamianę z T T T T T. Tak ma być?
Nie przerwałeś ładowania bootloadera. To jest polecenie bootloadera, nie systemu operacyjnego.
Jak przerwać ładowanie bootloadera?
Strony Poprzednia 1 2 3 4 Następna
eko.one.pl → Posty przez marek445
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc