576

(388 odpowiedzi, napisanych Oprogramowanie / Software)

root@OpenWrt:~# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Marvell Orion EHCI
S:  SerialNumber=orion-ehci.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=77.63
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0606 Rev= 7.02
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=03 Prnt=03 Port=01 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=13fe ProdID=1d00 Rev= 1.00
S:  Manufacturer=
S:  Product=USB DISK 2.0
S:  SerialNumber=07741E4102DB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=03 Prnt=03 Port=03 Cnt=02 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0d8c ProdID=000e Rev= 1.00
S:  Product=Generic USB Audio Device
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I:* If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=01(O) Atr=09(Isoc) MxPS= 200 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=82(I) Atr=05(Isoc) MxPS= 100 Ivl=1ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   4 Ivl=32ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=048d ProdID=9006 Rev= 2.00
S:  Manufacturer=ITE Technologies, Inc.
S:  Product=MT4171 DVB-T STICK
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=64ms

577

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Cześć, załadowałem moduły tak jak na eko i dalej na dmesg'u i logread'zie ciemno. Czyżby brakowało czegoś w obrazie?

578

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Najpierw ładuje rc-core, później dvb-core a na końcu dvb-usb. Po takiej kolejności brak błędów, lecz nie mam katalogu dvb w dev a logread i dmesg nic nie wypisują na temat dvb. Czegoś mi brakuje jeszcze?

579

(388 odpowiedzi, napisanych Oprogramowanie / Software)

A u mnie

[  393.128154] dvb_usb: Unknown symbol rc_register_device (err 0)
[  393.134204] dvb_usb: Unknown symbol rc_free_device (err 0)
[  393.139862] dvb_usb: Unknown symbol rc_allocate_device (err 0)
[  393.145810] dvb_usb: Unknown symbol rc_unregister_device (err 0)

lsmod

root@OpenWrt:/lib/modules/3.3.8# lsmod
Module                  Size  Used by    Not tainted
dvb_usb                16080  0
rc_core                 8688  1 dvb_usb
dvb_core               69436  1 dvb_usb
snd_usb_audio          67184  0
snd_usbmidi_lib        12588  1 snd_usb_audio
rtc_mv                  2188  0
gpio_keys               4004  0
evdev                   6584  0
lm85                   12872  0
i2c_mv64xxx             3308  0
i2c_dev                 4380  0
i2c_core               13532  4 dvb_usb,lm85,i2c_mv64xxx,i2c_dev
r8169                  34544  0
ledtrig_usbdev          1728  0
ledtrig_heartbeat        768  0
nf_nat_irc               760  0
nf_conntrack_irc        2364  1 nf_nat_irc
nf_nat_ftp               968  0
nf_conntrack_ftp        4348  1 nf_nat_ftp
ipt_MASQUERADE           916  1
iptable_nat             2328  1
nf_nat                  9534  4 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
xt_conntrack            2204  3
xt_CT                   1172  0
xt_NOTRACK               476  0
iptable_raw              552  1
xt_state                 612  0
nf_conntrack_ipv4       4416  6 iptable_nat,nf_nat
nf_defrag_ipv4           628  1 nf_conntrack_ipv4
nf_conntrack           36208 12 nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_conntrack,xt_CT,xt_NOTRACK,xt_state,nf_conntrack_ipv4
hwmon_vid               1516  1 lm85
ipt_REJECT              1540  2
xt_TCPMSS               2388  0
ipt_LOG                 5996  0
xt_comment               396 18
xt_multiport            1168  0
xt_mac                   548  0
xt_limit                1020  1
iptable_mangle           700  1
iptable_filter           584  1
ip_tables               9120  4 iptable_nat,iptable_raw,iptable_mangle,iptable_filter
xt_tcpudp               1628  3
x_tables                8648 18 ipt_MASQUERADE,iptable_nat,xt_conntrack,xt_CT,xt_NOTRACK,iptable_raw,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_comment,xt_multiport,xt_mac,xt_limit,iptable_mangle,iptable_filter,ip_tables,xt_tcpudp
hwmon                    676  1 lm85
snd_pcm_oss            29444  0
snd_mixer_oss          10828  1 snd_pcm_oss
snd_pcm                46968  2 snd_usb_audio,snd_pcm_oss
snd_timer              13256  1 snd_pcm
snd_rawmidi            12768  1 snd_usbmidi_lib
snd_seq_device          3536  1 snd_rawmidi
snd_hwdep               3936  1 snd_usb_audio
snd_page_alloc          3784  1 snd_pcm
snd                    31772  9 snd_usb_audio,snd_usbmidi_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
soundcore               3332  1 snd
vfat                    7336  0
fat                    39104  1 vfat
nls_iso8859_1           2812  0
nls_cp437               4340  0
crc_ccitt                896  0
input_core             18680  6 dvb_usb,rc_core,gpio_keys,evdev,snd
mv_cesa                 7224  0
aes_generic            32820  1 mv_cesa
crypto_blkcipher        9266  1 mv_cesa
cryptomgr               1628  0
aead                    3564  1 cryptomgr
sata_mv                19676  1
libata                110916  1 sata_mv
crypto_hash             7556  1 mv_cesa
crypto_algapi           8556  6 mv_cesa,aes_generic,crypto_blkcipher,cryptomgr,aead,crypto_hash

580

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Coś mam nie tak z tymi plikami. Te inne patche również nie działają:

Applying patch platform/it913x-backports-from-kernel-3.4.patch
patching file drivers/media/dvb/dvb-usb/it913x.c
patch: **** malformed patch at line 32:  struct it913x_state {

Patch platform/it913x-backports-from-kernel-3.4.patch does not apply (enforce with -f)
make[4]: *** [/opt/attitude_adjustment/build_dir/linux-kirkwood/linux-3.3.8/.quilt_checked] Error 1
make[4]: Leaving directory `/opt/attitude_adjustment/target/linux/kirkwood'
make[3]: *** [compile] Error 2
make[3]: Leaving directory `/opt/attitude_adjustment/target/linux'
make[2]: *** [target/linux/compile] Error 2
make[2]: Leaving directory `/opt/attitude_adjustment'
make[1]: *** [/opt/attitude_adjustment/staging_dir/target-arm_v5te_uClibc-0.9.33.2_eabi/stamp/.target_compile] Error 2
make[1]: Leaving directory `/opt/attitude_adjustment'
make: *** [world] Błąd 2
bartekdebian2@debian2:/opt/attitude_adjustment$ 

581

(388 odpowiedzi, napisanych Oprogramowanie / Software)

4 związane z it913x i właśnie ten dvb_usb_disable_rc_polling.patch, a po co ja go tam dałem to nawet nie wiem big_smile

582

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Jeden patch coś niewspółgra

Applying patch platform/dvb_usb_disable_rc_polling.patch
patching file drivers/media/dvb/dvb-usb/dvb-usb-init.c
patch: **** malformed patch at line 6:  module_param_named(debug, dvb_usb_debug, int, 0644);

Patch platform/dvb_usb_disable_rc_polling.patch does not apply (enforce with -f)
make[4]: *** [/opt/attitude_adjustment/build_dir/linux-kirkwood/linux-3.3.8/.quilt_checked] Error 1
make[4]: Leaving directory `/opt/attitude_adjustment/target/linux/kirkwood'
make[3]: *** [compile] Error 2
make[3]: Leaving directory `/opt/attitude_adjustment/target/linux'
make[2]: *** [target/linux/compile] Error 2
make[2]: Leaving directory `/opt/attitude_adjustment'
make[1]: *** [/opt/attitude_adjustment/staging_dir/target-arm_v5te_uClibc-0.9.33.2_eabi/stamp/.target_compile] Error 2
make[1]: Leaving directory `/opt/attitude_adjustment'
make: *** [world] Błąd 2

583

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Super. Zabieram się do pracy.

PS Trochę wstyd pytać, ale w jaki sposób ściągnąć plik z githuba z tym patchem?

584

(388 odpowiedzi, napisanych Oprogramowanie / Software)

I to się robi na tej samej zasadzie, co tamte patche dla nsa310 aplikowałem, tak?

585

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Wymodzisz takie coś dla kirkwooda, albo jakiś tutorial?

586

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Mi też znajduje 2 frontendy, ale nie zwracam na to uwagi. Wybierasz ten w porządku i chodzi.

587

(321 odpowiedzi, napisanych Oprogramowanie / Software)

No nie znalazłem tego hmm

588

(321 odpowiedzi, napisanych Oprogramowanie / Software)

Możesz podpowiedzieć, gdzie te liby od alsy do kernela można wkompilować? Nigdzie tego nie mogę znaleźć. Jedynie alse mogę w obraz wrzucić, ale libów nie ma sad

589

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Więc jeśli Ci działa to po Ci te moduły? Ich na AA nie uzyskasz, a mówiłeś że na BB chodzi w porządku.

590

(27 odpowiedzi, napisanych Oprogramowanie / Software)

Tak nie na temat, ale czy mógłbyś podać link, gdzie można kupić te 305m za 90zł?

591

(388 odpowiedzi, napisanych Oprogramowanie / Software)

Cezary ma rację, gdybyś dokładnie przeczytał informację z linku, którego Ci kiedyś wstawiłem przeczytałbyś iż te moduły kompilowane dla BB. Ja również mam problemy z dvbt na AA, lecz niestety trunk u mnie nie działa więc na dzień dzisiejszy muszę darować sobie telewizję.

592

(321 odpowiedzi, napisanych Oprogramowanie / Software)

Ale jak pamiętam na Twoim AA wszystko chodziło, a przecież config mam od Ciebie. Jutro się za to zabiorę, dzięki za wskazówki.

593

(321 odpowiedzi, napisanych Oprogramowanie / Software)

Bardziej prawdopodobne, że oss, bo gdy zmienię z alsy na oss to normalnie chodzi, tylko że strasznie długo trwa ściszanie muzyki. Mówisz, że trzeba by dorzucić alse do kernela, tak?

594

(321 odpowiedzi, napisanych Oprogramowanie / Software)

Zmieniłem to, teraz jest tak:

root@OpenWrt:~# /etc/init.d/mpd start
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch pswitch-joined penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 151
  Mono:
  Front Left: Playback 40 [26%] [-20.88dB] [on]
  Front Right: Playback 40 [26%] [-20.88dB] [on]
BusyBox v1.19.4 (2014-03-30 16:38:34 CEST) multi-call binary.

Usage: nice [-n ADJUST] [PROG ARGS]

Change scheduling priority, run PROG

        -n ADJUST       Adjust priority by ADJUST

Failed to load database: Database corrupted
output: line 9: No such audio output plugin: alsa

Ciągle brakuje tej biblioteki, ale przecież mam ją zainstalowaną hmm

595

(321 odpowiedzi, napisanych Oprogramowanie / Software)

Pomoże ktoś?

root@OpenWrt:/mnt/sdb1/home/dlna# /etc/init.d/mpd start
amixer: Unable to find simple control 'PCM',0

BusyBox v1.19.4 (2014-03-30 16:38:34 CEST) multi-call binary.

Usage: nice [-n ADJUST] [PROG ARGS]

Change scheduling priority, run PROG

        -n ADJUST       Adjust priority by ADJUST

Failed to load database: Database corrupted
output: line 9: No such audio output plugin: alsa
root@OpenWrt:/mnt/sdb1/home/dlna# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Device [Generic USB Audio Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
root@OpenWrt:/mnt/sdb1/home/dlna# amixer
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch pswitch-joined penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 151
  Mono:
  Front Left: Playback 150 [99%] [0.25dB] [on]
  Front Right: Playback 150 [99%] [0.25dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pvolume-joined cvolume cvolume-joined pswitch pswitch-joined cswitch cswitch-joined penum
  Playback channels: Mono
  Capture channels: Mono
  Limits: Playback 0 - 32 Capture 0 - 16
  Mono: Playback 23 [72%] [34.36dB] [off] Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Auto Gain Control',0
  Capabilities: pswitch pswitch-joined penum
  Playback channels: Mono
  Mono: Playback [on]
root@OpenWrt:/mnt/sdb1/home/dlna# cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Marvell Orion EHCI
S:  SerialNumber=orion-ehci.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=77.63
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0606 Rev= 7.02
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=03 Prnt=03 Port=01 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=13fe ProdID=1d00 Rev= 1.00
S:  Manufacturer=
S:  Product=USB DISK 2.0
S:  SerialNumber=07741E4102DB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=03 Prnt=03 Port=03 Cnt=02 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0d8c ProdID=000e Rev= 1.00
S:  Product=Generic USB Audio Device
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I:* If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=01(O) Atr=09(Isoc) MxPS= 200 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E:  Ad=82(I) Atr=05(Isoc) MxPS= 100 Ivl=1ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   4 Ivl=32ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=048d ProdID=9006 Rev= 2.00
S:  Manufacturer=ITE Technologies, Inc.
S:  Product=MT4171 DVB-T STICK
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=64ms
   music_directory "/mnt/sdb1/home/dlna/"
    playlist_directory "/mnt/sdc1/"
    db_file "/mnt/sdc1/database"
    pid_file "/mnt/sdc1/pid"
    state_file "/mnt/sdc1/state"
    input {
        plugin "curl"
    }
   audio_output {
        type            "alsa"
        name            "alsa"
        device          "hw:0,0"
        bufer_time      "5"
        mixer_type      "hardware"
        mixer_control   "Speaker"
}

Alsa utils,lib zainstalowane. Reszta sterowników też.

596

(25 odpowiedzi, napisanych Oprogramowanie / Software)

Od nowa wszystko pościągałem, skompilowałem i chodzi jak marzenie.

597

(25 odpowiedzi, napisanych Oprogramowanie / Software)

Dalej nie wykrywa tego.

## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-3.3.8
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1187176 Bytes = 1.1 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.3.8 (bartekdebian2@debian2) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #9 Sat Mar 29 12:17:07 CET 2014
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: ZyXEL NSA-310
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=5
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 256420k/256420k available, 5724k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc02f2000   (2984 kB)
[    0.000000]       .init : 0xc02f2000 - 0xc0311000   ( 124 kB)
[    0.000000]       .data : 0xc0312000 - 0xc0330380   ( 121 kB)
[    0.000000]        .bss : 0xc03303a4 - 0xc035acd0   ( 171 kB)
[    0.000000] NR_IRQS:114
[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
[    0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1
[    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[   12.161820] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[   12.251801] pid_max: default: 32768 minimum: 301
[   12.251951] Mount-cache hash table entries: 512
[   12.252264] CPU: Testing write buffer coherency: ok
[   12.252520] Setting up static identity map for 0x28f320 - 0x28f35c
[   12.254273] NET: Registered protocol family 16
[   12.256497] Kirkwood: MV88F6281-A1, TCLK=200000000.
[   12.256512] Feroceon L2: Enabling L2
[   12.256549] Feroceon L2: Cache support initialised.
[   12.258562] Kirkwood PCIe port 0:
[   12.258569] link up
[   12.258577] PCI: bus0 uses PCIe port 0
[   12.258722] PCI host bridge to bus 0000:00
[   12.258737] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[   12.258748] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   12.259080] PCI: bus0: Fast back to back transfers disabled
[   12.259417] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
[   12.259435] pci 0000:00:01.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
[   12.259455] pci 0000:00:01.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
[   12.259472] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x10ff]
[   12.265265] bio: create slab <bio-0> at 0
[   12.266167] SCSI subsystem initialized
[   12.266726] usbcore: registered new interface driver usbfs
[   12.266958] usbcore: registered new interface driver hub
[   12.267110] usbcore: registered new device driver usb
[   12.268211] Switching to clocksource orion_clocksource
[   12.269762] NET: Registered protocol family 2
[   12.269918] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   12.270202] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   12.270385] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[   12.270480] TCP: Hash tables configured (established 8192 bind 8192)
[   12.270490] TCP reno registered
[   12.270500] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   12.270522] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   12.270699] NET: Registered protocol family 1
[   12.272256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   12.272270] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   12.272606] msgmni has been set to 500
[   12.272806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   12.272820] io scheduler noop registered
[   12.272828] io scheduler deadline registered (default)
[   12.339408] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[   12.362125] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[   12.761385] console [ttyS0] enabled
[   12.766392] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
[   12.775071] Scanning device for bad blocks
[   12.779437] Bad eraseblock 2 at 0x000000040000
[   12.783948] Bad eraseblock 3 at 0x000000060000
[   12.884302] Creating 9 MTD partitions on "orion_nand":
[   12.889488] 0x000000000000-0x000000100000 : "uboot"
[   12.895284] 0x000000100000-0x000000180000 : "uboot_env"
[   12.901391] 0x000000180000-0x000000200000 : "key_store"
[   12.907425] 0x000000200000-0x000000280000 : "info"
[   12.913048] 0x000000280000-0x000000c80000 : "etc"
[   12.918588] 0x000000c80000-0x000001680000 : "kernel_1"
[   12.924553] 0x000001680000-0x000004640000 : "rootfs1"
[   12.930501] 0x000004640000-0x000005040000 : "kernel_2"
[   12.936474] 0x000005040000-0x000008000000 : "rootfs2"
[   12.942893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.949750] Initializing USB Mass Storage driver...
[   12.954789] usbcore: registered new interface driver usb-storage
[   12.960836] USB Mass Storage support registered.
[   12.965615] usbcore: registered new interface driver libusual
[   12.971673] cpuidle: using governor ladder
[   12.978139] TCP cubic registered
[   12.981410] NET: Registered protocol family 17
[   12.985945] Bridge firewalling registered
[   12.990158] 8021q: 802.1Q VLAN Support v1.8
[   12.994594] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   13.001262] Waiting 5sec before mounting root device...
[   18.008359] VFS: Cannot open root device "sda1" or unknown-block(0,0)
[   18.014828] Please append a correct "root=" boot option; here are the available partitions:
[   18.023241] 1f00            1024 mtdblock0  (driver?)
[   18.028332] 1f01             512 mtdblock1  (driver?)
[   18.033414] 1f02             512 mtdblock2  (driver?)
[   18.038508] 1f03             512 mtdblock3  (driver?)
[   18.043591] 1f04           10240 mtdblock4  (driver?)
[   18.048683] 1f05           10240 mtdblock5  (driver?)
[   18.053767] 1f06           48896 mtdblock6  (driver?)
[   18.058860] 1f07           10240 mtdblock7  (driver?)
[   18.063943] 1f08           48896 mtdblock8  (driver?)
[   18.069034] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

598

(25 odpowiedzi, napisanych Oprogramowanie / Software)

Byłem tam, ale niestety nie wiem co tam pozaznaczać.

599

(25 odpowiedzi, napisanych Oprogramowanie / Software)

A gdzie niby mogę to w kernel wkompilować?

600

(25 odpowiedzi, napisanych Oprogramowanie / Software)

Jest na 100%

PunBB bbcode test