FAQ o OpenWrt | Sprzedam różne routery | Oddam

2020-02-26 20:40:30

Te gotowe na usb chciałem podejrzeć ile to kosztuje itp, jak tego szukać. Z kompilacją to jeszcze poczekam ale nie mówię nie

2020-02-26 19:55:34

Tak? Ledy w zasadzie nie są mi do niczego potrzebne r6220 jest w pracowni a tu wygląd jego jest mało ważny.
Dałbyś jakiś link który działa przy r6220? Czy nie testowałeś takich gotowych? Drogie to?

2020-02-26 19:39:37

Witam

Czy w tym sprzęcie możliwe jest wlutowanie się gdzieś aby sterować pinami?

2020-02-24 07:28:39

Sprawdzę, na pewno ma ustawiony start przy podaniu zasilania bo tak muszę mieć ustawione. Może podłączę mu lan na usb i zobaczę jak wtedy będzie.

2020-02-23 18:22:57

ad2014 napisał/a:

co znaczy właczam kompa podłaczonego pod pod r6220 ? jestes podłaczony kablem lan przez eth ?

Dokładnie tak.

Na logu widać gdy link up to rozłącza hub. Ciekawe dlaczego. Mam w pracy inne huby i sprawdzę z nimi.

Wczoraj podłączyłem bardzo starego huba bez zasilania i też było to samo.

2020-02-23 16:42:41

Właśnie przyszedłem do pracowni, włączyłem kompa i dwie kamery padły z takim logiem.

Sun Feb 23 15:50:22 2020 daemon.notice netifd: wwan (3226): udhcpc: lease of 192.168.1.69 obtained, lease time 3600
Sun Feb 23 16:20:22 2020 daemon.notice netifd: wwan (3226): udhcpc: sending renew to 192.168.1.1
Sun Feb 23 16:20:23 2020 daemon.notice netifd: wwan (3226): udhcpc: lease of 192.168.1.69 obtained, lease time 3600
Sun Feb 23 16:29:23 2020 daemon.warn dnsmasq-dhcp[3440]: no address range available for DHCP request via wlan0
Sun Feb 23 16:36:30 2020 kern.info kernel: [15429.267540] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
Sun Feb 23 16:36:30 2020 kern.warn kernel: [15429.280902] xhci-mtk 1e1c0000.xhci: ERROR unknown event type 37
Sun Feb 23 16:36:30 2020 kern.info kernel: [15429.293511] usb 1-2: USB disconnect, device number 6
Sun Feb 23 16:36:30 2020 kern.info kernel: [15429.303889] usb 1-2.1: USB disconnect, device number 7
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314519] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314568] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314623] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314666] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314742] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314855] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314901] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314945] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.314989] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.315035] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.315156] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.315203] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.315249] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.315294] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.err kernel: [15429.315339] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 16:36:30 2020 kern.info kernel: [15429.480061] usb 1-2.2: USB disconnect, device number 8
Sun Feb 23 16:36:30 2020 kern.info kernel: [15429.493829] usb 1-2.4: USB disconnect, device number 9
Sun Feb 23 16:36:30 2020 kern.warn kernel: [15429.782530] ------------[ cut here ]------------
Sun Feb 23 16:36:30 2020 kern.warn kernel: [15429.791990] WARNING: CPU: 1 PID: 4626 at fs/sysfs/group.c:237 0x8018a108
Sun Feb 23 16:36:30 2020 kern.warn kernel: [15429.805384] sysfs group 'id' not found for kobject 'input3'
Sun Feb 23 16:36:30 2020 kern.warn kernel: [15429.816530] Modules linked in: qcserial pppoe ppp_async option cdc_mbim uvcvideo usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm gspca_main cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard videobuf2_v4l2 usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4
Sun Feb 23 16:36:30 2020 kern.info kernel: [15429.958067] usb 1-2: new high-speed USB device number 10 using xhci-mtk
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15429.971667]  nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables input_core crc_ccitt compat cdc_wdm cdc_acm fuse videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev i2c_dev ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.114354]  ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 dma_shared_buffer uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.166553] CPU: 1 PID: 4626 Comm: mjpg_streamer Tainted: G        W       4.14.169 #0
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.182323] Stack : 00000000 00000000 00000000 80550000 00000000 00000000 00000000 00000000
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.198988]         00000000 00000000 00000000 00000000 00000000 00000001 85429a98 53261648
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.215629]         85429b30 00000000 00000000 000111e0 00000038 8049b958 00000007 00000000
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.232272]         00000000 80550000 00028a99 00000000 85429a78 80000000 00000000 804e4ea8
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.248916]         8018a108 000000ed 86f5d820 80550000 00000001 802ac7e0 00000004 806b0004
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.265560]         ...
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.270420] Call Trace:
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.270445] [<8049b958>] 0x8049b958
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.282227] [<8018a108>] 0x8018a108
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.289236] [<802ac7e0>] 0x802ac7e0
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.296170] [<8000c1a0>] 0x8000c1a0
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.303102] [<8000c1a8>] 0x8000c1a8
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.310036] [<804847d4>] 0x804847d4
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.316982] [<80071a10>] 0x80071a10
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.323915] [<8002e5f8>] 0x8002e5f8
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.330848] [<8018a108>] 0x8018a108
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.337792] [<8002e680>] 0x8002e680
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.344729] [<80189d2c>] 0x80189d2c
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.351668] [<8018a108>] 0x8018a108
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.358624] [<8018a250>] 0x8018a250
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.365554] [<802bd7a0>] 0x802bd7a0
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.372499] [<802b727c>] 0x802b727c
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.379431] [<802b766c>] 0x802b766c
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.386386] [<802b877c>] 0x802b877c
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.393334] [<86480000>] 0x86480000 [input_core@86480000+0x6190]
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.405291] [<800677ac>] 0x800677ac
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.412224] [<80088398>] 0x80088398
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.419220] [<864829f8>] 0x864829f8 [input_core@86480000+0x6190]
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.431171] [<8664020c>] 0x8664020c [uvcvideo@86640000+0x10500]
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.442957] [<802b7420>] 0x802b7420
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.449919] [<877c8be4>] 0x877c8be4 [videodev@877c0000+0x1a540]
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.461705] [<80489898>] 0x80489898
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.468669] [<877c0454>] 0x877c0454 [videodev@877c0000+0x1a540]
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.480483] [<801197d4>] 0x801197d4
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.487452] [<8004a564>] 0x8004a564
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.494399] [<80030ca4>] 0x80030ca4
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.501363] [<800320fc>] 0x800320fc
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.508296] [<8003d27c>] 0x8003d27c
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.515232] [<8000ab04>] 0x8000ab04
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.522166] [<8012ef3c>] 0x8012ef3c
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.529104] [<80130304>] 0x80130304
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.536051] [<8000b840>] 0x8000b840
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.542984] [<800070b0>] 0x800070b0
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.549917] [<8049b5e4>] 0x8049b5e4
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.556858]
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.561019] ---[ end trace 33bbe51e99827653 ]---
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.570334] ------------[ cut here ]------------
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.579632] WARNING: CPU: 1 PID: 4626 at fs/sysfs/group.c:237 0x8018a108
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.593070] sysfs group 'capabilities' not found for kobject 'input3'
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.605957] Modules linked in: qcserial pppoe ppp_async option cdc_mbim uvcvideo usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm gspca_main cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard videobuf2_v4l2 usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4
Sun Feb 23 16:36:31 2020 kern.info kernel: [15430.609500] hub 1-2:1.0: USB hub found
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.747899]  nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables input_core crc_ccitt compat cdc_wdm cdc_acm fuse videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev i2c_dev ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.897928]  ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 dma_shared_buffer uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.950031] CPU: 1 PID: 4626 Comm: mjpg_streamer Tainted: G        W       4.14.169 #0
Sun Feb 23 16:36:31 2020 kern.info kernel: [15430.952183] hub 1-2:1.0: 4 ports detected
Sun Feb 23 16:36:31 2020 kern.warn kernel: [15430.965790] Stack : 00000000 00000000 00000000 80550000 00000000 00000000 00000000 00000000
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15430.965824]         00000000 00000000 00000000 00000000 00000000 00000001 85429a98 53261648
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.007044]         85429b30 00000000 00000000 00000124 00000038 8049b958 20202020 2e342020
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.023693]         854298e4 80550000 000e7f0f 00000000 85429a78 80000000 00000000 804e4ea8
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.040341]         8018a108 000000ed 86f5d820 80550000 00000001 802ac7e0 00000004 806b0004
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.056985]         ...
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.061845] Call Trace:
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.061871] [<8049b958>] 0x8049b958
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.073651] [<8018a108>] 0x8018a108
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.080662] [<802ac7e0>] 0x802ac7e0
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.087596] [<8000c1a0>] 0x8000c1a0
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.094528] [<8000c1a8>] 0x8000c1a8
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.101461] [<804847d4>] 0x804847d4
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.108404] [<80071a10>] 0x80071a10
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.115337] [<8002e5f8>] 0x8002e5f8
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.122270] [<8018a108>] 0x8018a108
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.129214] [<8002e680>] 0x8002e680
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.136151] [<80189d2c>] 0x80189d2c
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.143090] [<8018a108>] 0x8018a108
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.150049] [<8018a250>] 0x8018a250
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.156979] [<802bd7a0>] 0x802bd7a0
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.163923] [<802b727c>] 0x802b727c
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.170856] [<802b766c>] 0x802b766c
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.177812] [<802b877c>] 0x802b877c
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.184759] [<86480000>] 0x86480000 [input_core@86480000+0x6190]
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.196714] [<800677ac>] 0x800677ac
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.203648] [<80088398>] 0x80088398
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.210645] [<864829f8>] 0x864829f8 [input_core@86480000+0x6190]
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.222597] [<8664020c>] 0x8664020c [uvcvideo@86640000+0x10500]
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.234383] [<802b7420>] 0x802b7420
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.241347] [<877c8be4>] 0x877c8be4 [videodev@877c0000+0x1a540]
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.253131] [<80489898>] 0x80489898
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.260097] [<877c0454>] 0x877c0454 [videodev@877c0000+0x1a540]
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.271913] [<801197d4>] 0x801197d4
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.278879] [<8004a564>] 0x8004a564
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.285827] [<80030ca4>] 0x80030ca4
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.292790] [<800320fc>] 0x800320fc
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.299721] [<8003d27c>] 0x8003d27c
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.306656] [<8000ab04>] 0x8000ab04
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.313591] [<8012ef3c>] 0x8012ef3c
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.320530] [<80130304>] 0x80130304
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.327476] [<8000b840>] 0x8000b840
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.334409] [<800070b0>] 0x800070b0
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.341345] [<8049b5e4>] 0x8049b5e4
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.348287]
Sun Feb 23 16:36:32 2020 kern.warn kernel: [15431.352621] ---[ end trace 33bbe51e99827654 ]---
Sun Feb 23 16:36:32 2020 kern.info kernel: [15431.570088] usb 1-2.2: new high-speed USB device number 11 using xhci-mtk
Sun Feb 23 16:36:32 2020 kern.info kernel: [15431.941222] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
Sun Feb 23 16:36:32 2020 kern.info kernel: [15431.984576] input: UVC Camera (046d:0809) as /devices/platform/1e1c0000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/input/input6
Sun Feb 23 16:36:33 2020 kern.info kernel: [15432.110163] usb 1-2.4: new high-speed USB device number 12 using xhci-mtk
Sun Feb 23 16:36:33 2020 kern.info kernel: [15432.272539] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-3000 (045e:0779)
Sun Feb 23 16:36:33 2020 kern.info kernel: [15432.308152] input: Microsoft® LifeCam HD-3000: Mi as /devices/platform/1e1c0000.xhci/usb1/1-2/1-2.4/1-2.4:1.0/input/input7
Sun Feb 23 16:36:33 2020 kern.info kernel: [15432.630104] usb 1-2.1: new high-speed USB device number 13 using xhci-mtk
Sun Feb 23 16:36:33 2020 kern.info kernel: [15432.772881] uvcvideo: Found UVC 1.00 device AN-VC500 Camera (043e:3012)
Sun Feb 23 16:36:33 2020 kern.info kernel: [15432.787723] input: AN-VC500 Camera as /devices/platform/1e1c0000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input8
Sun Feb 23 16:36:35 2020 user.info MJPG-streamer [3722]: Error grabbing frames
Sun Feb 23 16:36:35 2020 user.info MJPG-streamer [3722]: cleaning up resources allocated by input thread
Sun Feb 23 16:36:35 2020 user.info MJPG-streamer [3705]: Error grabbing frames
Sun Feb 23 16:36:35 2020 user.info MJPG-streamer [3705]: cleaning up resources allocated by input thread
Sun Feb 23 16:36:35 2020 kern.info kernel: [15434.806281] mtk_soc_eth 1e100000.ethernet eth0: port 2 link down
Sun Feb 23 16:36:38 2020 user.info MJPG-streamer [7325]: starting application
Sun Feb 23 16:36:38 2020 user.info MJPG-streamer [7325]: MJPG Streamer Version.: 2.0
Sun Feb 23 16:36:38 2020 user.info MJPG-streamer [7325]: Using V4L2 device.: /dev/video0
Sun Feb 23 16:36:38 2020 user.info MJPG-streamer [7325]: Desired Resolution: 640 x 480
Sun Feb 23 16:36:38 2020 user.info MJPG-streamer [7325]: Frames Per Second.: 10\

Ktoś, coś?

edit.

Wystarczy, że odpalę polecenie

 /etc/init.d/mjpg-streamer restart | /etc/init.d/mjpg-streamer2 restart | /etc/init.d/mjpg-streamer3 restart | /etc/init.d/mjpg-streamer4 restart | /etc/init.d/mjpg-streamer5 restart

i kamery działają ale 0,3,4

2020-02-23 12:18:14

Tak, tylko koledze wyżej piszę, że można na nim więcej osiągnąć tzn na tym padavanie. Powoli przekonuję się do openwrt i mój mir3g dostanie go w niedalekiej przyszłości.

2020-02-23 11:32:21

Mój mir3g z padavanem 3.4.3.9-099_dff9a34 wyciąga czasami ponad 400. Teraz sprawdzałem na zwykłym speed teście i jest 360 także na padavanie on w miarę ładnie trzyma.

2020-02-23 11:20:27

Witam

Walczę z trzema kamerami podłączonymi przez hub usb unitek Y-3197

Obecnie mam taki problem, że rozłącza mi huba (tak to wynika z logów) Pytanie dlaczego?

Hub podłączyłem przez zasilacz i pobór pokazuje mi max 400mA przy włączonym podglądzie.

Problem jest w tym, że gdy wszystko działa to gdy włączam kompa podłączonego pod r6220 rozłącza mi huba i znika obraz z dwóch kamer. Z /dev/video1 i /dev/video2 robią mi się /dev/video3 i 4 i tak już zostają. Muszę dać restart mjpg i dopiero jest obraz ale na kolejnych już portach bo w zapasie zrobiłem sobie mjpg-streamer2,3,4,5

Ustawienia mam takie jak w tym temacie tylko, że dodałem kolejne dla video3 i 4. https://eko.one.pl/forum/viewtopic.php?id=19537

moje kamery

root@OpenWrt:~# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso= 15
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.14
S:  Manufacturer=Linux 4.14.169 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=1e1c0000.xhci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 14 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=02 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0610 Rev=92.24
S:  Manufacturer=GenesysLogic
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=01 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=02 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=14 Port=00 Cnt=01 Dev#= 15 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=043e ProdID=3012 Rev=11.15
S:  Manufacturer=LGE
S:  Product=AN-VC500 Camera
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
A:  FirstIf#= 2 IfCount= 2 Cls=01(audio) Sub=02 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=16ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I:* If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=3048 Ivl=125us
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I:  If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=05(Isoc) MxPS= 512 Ivl=1ms

T:  Bus=01 Lev=02 Prnt=14 Port=01 Cnt=02 Dev#= 16 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=046d ProdID=0809 Rev= 0.10
S:  SerialNumber=ACA12FA9
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
A:  FirstIf#= 2 IfCount= 2 Cls=01(audio) Sub=02 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E:  Ad=87(I) Atr=03(Int.) MxPS=  16 Ivl=16ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I:  If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 192 Ivl=125us
I:* If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 384 Ivl=125us
I:  If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us
I:  If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 640 Ivl=125us
I:  If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 800 Ivl=125us
I:  If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 944 Ivl=125us
I:  If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1280 Ivl=125us
I:  If#= 1 Alt= 8 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1600 Ivl=125us
I:  If#= 1 Alt= 9 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1984 Ivl=125us
I:  If#= 1 Alt=10 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=2688 Ivl=125us
I:  If#= 1 Alt=11 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=3060 Ivl=125us
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I:  If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS=  68 Ivl=1ms
I:  If#= 3 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS= 100 Ivl=1ms
I:  If#= 3 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS= 132 Ivl=1ms
I:  If#= 3 Alt= 4 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS= 196 Ivl=1ms

T:  Bus=01 Lev=02 Prnt=14 Port=03 Cnt=03 Dev#= 17 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=045e ProdID=0779 Rev= 1.06
S:  Manufacturer=Microsoft
S:  Product=Microsoft® LifeCam HD-3000
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
A:  FirstIf#= 2 IfCount= 2 Cls=01(audio) Sub=02 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=16ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I:  If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us
I:  If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 256 Ivl=125us
I:  If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us
I:  If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us
I:* If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us
I:  If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I:  If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=05(Isoc) MxPS= 256 Ivl=1ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 4.14
S:  Manufacturer=Linux 4.14.169 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=1e1c0000.xhci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

Zastanawiam się czy w konfiguracji mjpg w init.d nie dałoby się zmienić tak aby device2 było rozpoznawane np po nr seryjnym lub innej stałej wartości?

Obecnie w init.d mjpg dla kolejnych kamer wygląda następująco, zmieniają się tylko device port i video

#!/bin/sh /etc/rc.common
# Copyright (C) 2009-2014 OpenWrt.org

START=90
STOP=10

USE_PROCD=1
PROG=/usr/bin/mjpg_streamer

error() {
    echo "${initscript}:" "$@" 1>&2
}

start_instance() {
    local s="$1"

    config_get_bool enabled "$1" 'enabled' 0
    [ $enabled -eq 0 ] && return

    config_get input "$s" 'input'
    if [ -z "$input" ]; then
        error "in section '$s' option input is missing"
        return 1
    fi

    config_get output "$s" 'output'
    if [ -z "$output" ]; then
        error "in section '$s' option output is missing"
        return 1
    fi

    local input_arg
    if [ "x$input" = 'xuvc' ]; then
        input_arg="input_uvc.so"

        device2=/dev/video1
        input_arg="${input_arg} --device $device2"

        config_get fps "$s" 'fps'
        [ -n "$fps" ] && input_arg="${input_arg} --fps $fps"

        config_get_bool yuv "$s" 'yuv' 0
        if [ $yuv -ne 0 ]; then
            input_arg="${input_arg} --yuv"
            config_get quality "$s" 'quality'
            [ -n "$quality" ] && input_arg="${input_arg} --quality $quality"
        fi

        config_get resolution "$s" 'resolution'
        [ -n "$resolution" ] && input_arg="${input_arg} --resolution $resolution"

        config_get led "$s" 'led'
        [ -n "$led" ] && input_arg="${input_arg} --led $led"
    fi

    if [ -z "$input_arg" ]; then
        error "unsuported input option '$input' in section '$s'"
        return 1
    fi

    local output_arg
    if [ "x$output" = 'xhttp' ]; then
        output_arg="output_http.so"

        port2=9091
        [ -n "$port2" ] && output_arg="${output_arg} --port $port2"

        config_get listen_ip "$s" 'listen_ip'
        [ -n "$listen_ip" ] && output_arg="${output_arg} --listen $listen_ip"

        config_get www "$s" 'www'
        [ -n "$www" ] && output_arg="${output_arg} --www $www"

        config_get username "$s" 'username'
        config_get password "$s" 'password'
        [ -n "$username" ] && [ -n "$password" ] && output_arg="${output_arg} --credentials $username:$password"
    fi

    if [ "x$output" = 'xfile' ]; then
        output_arg="output_file.so"

        config_get folder "$s" 'folder'
        [ -n "$folder" ] && output_arg="${output_arg} --folder $folder"

        config_get delay "$s" 'delay'
        [ -n "$delay" ] && output_arg="${output_arg} --delay $delay"

        config_get link "$s" 'link'
        [ -n "$link" ] && output_arg="${output_arg} --link $link"

        config_get ringbuffer "$s" 'ringbuffer'
        [ -n "$ringbuffer" ] && output_arg="${output_arg} --size $ringbuffer"

        config_get exceed "$s" 'exceed'
        [ -n "$exceed" ] && output_arg="${output_arg} --exceed $exceed"

        config_get command "$s" 'command'
        [ -n "$command" ] && output_arg="${output_arg} --command $command"

    fi

    if [ -z "$output_arg" ]; then
        error "unsuported output option '$output' in section '$s'"
        return 1
    fi

    procd_open_instance
    procd_set_param command "$PROG" --input "$input_arg" --output "$output_arg"
    [ "x$output" = 'xhttp' ] && procd_add_mdns "http" "tcp" "$port" "daemon=mjpg-streamer"
    procd_close_instance
}

start_service() {
    config_load 'mjpg-streamer'
    config_foreach start_instance 'mjpg-streamer'
}

service_triggers() {
    procd_add_reload_trigger 'mjpg-streamer'
}

Podczas reboot wywołanym ręcznie raz video startuje 0,1,2 a czasami 0,3,4. Dodam, że 0 zawsze startuje zmieniają się tylko 2,3 na 3,4. To też jest loteria jak wystartują.

Teraz np mam podgląd z 3 kamer bez problemu ale wystarczy, że pójdę do pracowni i włączę kompa i dupa, dwie znikają a log z tego jest taki.

Sun Feb 23 09:08:28 2020 kern.info kernel: [41373.497931] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
Sun Feb 23 09:08:28 2020 kern.warn kernel: [41373.510802] xhci-mtk 1e1c0000.xhci: ERROR unknown event type 37
Sun Feb 23 09:08:33 2020 kern.info kernel: [41378.242456] mtk_soc_eth 1e100000.ethernet eth0: port 2 link down
Sun Feb 23 09:08:33 2020 kern.warn kernel: [41378.256036] xhci-mtk 1e1c0000.xhci: ERROR unknown event type 37
Sun Feb 23 09:08:38 2020 kern.info kernel: [41383.177861] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
Sun Feb 23 09:08:38 2020 kern.warn kernel: [41383.191306] xhci-mtk 1e1c0000.xhci: ERROR unknown event type 37
Sun Feb 23 09:08:42 2020 daemon.info dnsmasq[3171]: read /etc/hosts - 4 addresses
Sun Feb 23 09:08:42 2020 daemon.info dnsmasq[3171]: read /tmp/hosts/odhcpd - 0 addresses
Sun Feb 23 09:08:42 2020 daemon.info dnsmasq[3171]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Feb 23 09:08:42 2020 daemon.info dnsmasq-dhcp[3171]: read /etc/ethers - 0 addresses
Sun Feb 23 09:08:56 2020 kern.info kernel: [41401.388018] mtk_soc_eth 1e100000.ethernet eth0: port 2 link down
Sun Feb 23 09:08:56 2020 kern.warn kernel: [41401.401491] xhci-mtk 1e1c0000.xhci: ERROR unknown event type 37
Sun Feb 23 09:09:02 2020 kern.info kernel: [41407.582576] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
Sun Feb 23 09:09:02 2020 kern.warn kernel: [41407.595731] xhci-mtk 1e1c0000.xhci: ERROR unknown event type 37
Sun Feb 23 09:09:02 2020 kern.info kernel: [41407.608259] usb 1-2: USB disconnect, device number 2
Sun Feb 23 09:09:02 2020 kern.info kernel: [41407.618669] usb 1-2.1: USB disconnect, device number 4
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629299] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629334] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629366] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629397] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629429] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629466] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629497] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629530] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629563] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629595] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629670] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629702] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629734] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629767] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.err kernel: [41407.629799] uvcvideo: Failed to resubmit video URB (-19).
Sun Feb 23 09:09:02 2020 kern.info kernel: [41407.796564] usb 1-2.2: USB disconnect, device number 5
Sun Feb 23 09:09:02 2020 kern.info kernel: [41407.812889] usb 1-2.3: USB disconnect, device number 6
Sun Feb 23 09:09:03 2020 daemon.info dnsmasq-dhcp[3171]: DHCPREQUEST(br-lan) 22.22.22.160 78:45:c4:43:ab:19
Sun Feb 23 09:09:03 2020 daemon.info dnsmasq-dhcp[3171]: DHCPACK(br-lan) 22.22.22.160 78:45:c4:43:ab:19 xxx
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.087942] ------------[ cut here ]------------
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.097233] WARNING: CPU: 0 PID: 4011 at fs/sysfs/group.c:237 0x8018a108
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.110659] sysfs group 'id' not found for kobject 'input0'
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.121836] Modules linked in: qcserial pppoe ppp_async option cdc_mbim uvcvideo usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm gspca_main cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard videobuf2_v4l2 usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.263220]  nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables input_core crc_ccitt compat cdc_wdm cdc_acm fuse videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev i2c_dev ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.405406]  ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 dma_shared_buffer uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.457267] CPU: 0 PID: 4011 Comm: mjpg_streamer Not tainted 4.14.169 #0
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.470618] Stack : 00000000 00000000 00000000 80550000 00000000 00000000 00000000 00000000
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.487286]         00000000 00000000 00000000 00000000 00000000 00000001 845cda98 53261648
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.503929]         845cdb30 00000000 00000000 00008420 00000038 8049b958 00000007 00000000
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.520576]         00000000 80550000 0006fa33 00000000 845cda78 80000000 00000000 804e4ea8
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.537217]         8018a108 000000ed 87c06e20 80550000 00000003 802ac7e0 00000000 806b0000
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.553859]         ...
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.558717] Call Trace:
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.558741] [<8049b958>] 0x8049b958
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.570521] [<8018a108>] 0x8018a108
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.577528] [<802ac7e0>] 0x802ac7e0
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.584460] [<8000c1a0>] 0x8000c1a0
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.591391] [<8000c1a8>] 0x8000c1a8
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.598327] [<804847d4>] 0x804847d4
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.605284] [<80071a10>] 0x80071a10
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.612218] [<8002e5f8>] 0x8002e5f8
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.619150] [<8018a108>] 0x8018a108
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.626140] [<8002e680>] 0x8002e680
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.633079] [<80189d2c>] 0x80189d2c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.640016] [<8018a108>] 0x8018a108
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.647022] [<8018a250>] 0x8018a250
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.653964] [<802bd7a0>] 0x802bd7a0
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.660952] [<802b727c>] 0x802b727c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.667896] [<802b766c>] 0x802b766c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.674876] [<802b877c>] 0x802b877c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.681826] [<877a0000>] 0x877a0000 [videodev@877a0000+0x1a540]
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.693621] [<800677ac>] 0x800677ac
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.700575] [<80088398>] 0x80088398
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.707646] [<8779a9f8>] 0x8779a9f8 [input_core@87798000+0x6190]
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.719642] [<8662020c>] 0x8662020c [uvcvideo@86620000+0x10500]
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.731487] [<802b7420>] 0x802b7420
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.738435] [<877a8be4>] 0x877a8be4 [videodev@877a0000+0x1a540]
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.750239] [<80489898>] 0x80489898
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.757226] [<877a0454>] 0x877a0454 [videodev@877a0000+0x1a540]
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.769046] [<801197d4>] 0x801197d4
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.776030] [<8004a564>] 0x8004a564
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.783013] [<80030ca4>] 0x80030ca4
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.789973] [<800320fc>] 0x800320fc
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.796931] [<8003d27c>] 0x8003d27c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.803895] [<8000ab04>] 0x8000ab04
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.810846] [<80054b10>] 0x80054b10
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.817779] [<8003ac6c>] 0x8003ac6c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.824738] [<8003d50c>] 0x8003d50c
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.831672] [<80130304>] 0x80130304
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.838602] [<8003d858>] 0x8003d858
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.845534] [<8000b840>] 0x8000b840
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.852465] [<800070b0>] 0x800070b0
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.859407]
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.862692] ---[ end trace 9d4da5f3ba837da6 ]---
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.871951] ------------[ cut here ]------------
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.881248] WARNING: CPU: 0 PID: 4011 at fs/sysfs/group.c:237 0x8018a108
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.894674] sysfs group 'capabilities' not found for kobject 'input0'
Sun Feb 23 09:09:03 2020 kern.warn kernel: [41408.907589] Modules linked in: qcserial pppoe ppp_async option cdc_mbim uvcvideo usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm gspca_main cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard videobuf2_v4l2 usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.049006]  nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables input_core crc_ccitt compat cdc_wdm cdc_acm fuse videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev i2c_dev ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.191207]  ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 dma_shared_buffer uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.243034] CPU: 0 PID: 4011 Comm: mjpg_streamer Tainted: G        W       4.14.169 #0
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.258808] Stack : 00000000 00000000 00000000 80550000 00000000 00000000 00000000 00000000
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.275479]         00000000 00000000 00000000 00000000 00000000 00000001 845cda98 53261648
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.292121]         845cdb30 00000000 00000000 00009610 00000038 8049b958 00000007 00000000
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.308762]         00000000 80550000 0003b55a 00000000 845cda78 80000000 00000000 804e4ea8
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.325406]         8018a108 000000ed 87c06e20 80550000 00000001 802ac7e0 00000000 806b0000
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.342054]         ...
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.346912] Call Trace:
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.346937] [<8049b958>] 0x8049b958
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.358715] [<8018a108>] 0x8018a108
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.365723] [<802ac7e0>] 0x802ac7e0
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.372656] [<8000c1a0>] 0x8000c1a0
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.379587] [<8000c1a8>] 0x8000c1a8
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.386517] [<804847d4>] 0x804847d4
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.393462] [<80071a10>] 0x80071a10
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.400394] [<8002e5f8>] 0x8002e5f8
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.407324] [<8018a108>] 0x8018a108
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.414316] [<8002e680>] 0x8002e680
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.421265] [<80189d2c>] 0x80189d2c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.428206] [<8018a108>] 0x8018a108
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.435214] [<8018a250>] 0x8018a250
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.442156] [<802bd7a0>] 0x802bd7a0
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.449145] [<802b727c>] 0x802b727c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.456088] [<802b766c>] 0x802b766c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.463067] [<802b877c>] 0x802b877c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.470018] [<877a0000>] 0x877a0000 [videodev@877a0000+0x1a540]
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.481811] [<800677ac>] 0x800677ac
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.488753] [<80088398>] 0x80088398
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.495820] [<8779a9f8>] 0x8779a9f8 [input_core@87798000+0x6190]
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.507814] [<8662020c>] 0x8662020c [uvcvideo@86620000+0x10500]
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.519669] [<802b7420>] 0x802b7420
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.526625] [<877a8be4>] 0x877a8be4 [videodev@877a0000+0x1a540]
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.538430] [<80489898>] 0x80489898
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.545418] [<877a0454>] 0x877a0454 [videodev@877a0000+0x1a540]
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.557238] [<801197d4>] 0x801197d4
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.564225] [<8004a564>] 0x8004a564
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.571208] [<80030ca4>] 0x80030ca4
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.578169] [<800320fc>] 0x800320fc
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.585127] [<8003d27c>] 0x8003d27c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.592077] [<8000ab04>] 0x8000ab04
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.599021] [<80054b10>] 0x80054b10
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.605951] [<8003ac6c>] 0x8003ac6c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.612911] [<8003d50c>] 0x8003d50c
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.619843] [<80130304>] 0x80130304
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.626780] [<8003d858>] 0x8003d858
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.633718] [<8000b840>] 0x8000b840
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.640649] [<800070b0>] 0x800070b0
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.647591]
Sun Feb 23 09:09:04 2020 kern.warn kernel: [41409.650874] ---[ end trace 9d4da5f3ba837da7 ]---
Sun Feb 23 09:09:04 2020 kern.info kernel: [41409.731201] usb 1-2: new high-speed USB device number 7 using xhci-mtk
Sun Feb 23 09:09:05 2020 kern.info kernel: [41409.949205] hub 1-2:1.0: USB hub found
Sun Feb 23 09:09:05 2020 kern.info kernel: [41409.968501] hub 1-2:1.0: 4 ports detected
Sun Feb 23 09:09:05 2020 kern.info kernel: [41410.321224] usb 1-2.1: new high-speed USB device number 8 using xhci-mtk
Sun Feb 23 09:09:05 2020 kern.info kernel: [41410.701267] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
Sun Feb 23 09:09:05 2020 kern.info kernel: [41410.732516] input: UVC Camera (046d:0809) as /devices/platform/1e1c0000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
Sun Feb 23 09:09:05 2020 kern.info kernel: [41410.851216] usb 1-2.2: new high-speed USB device number 9 using xhci-mtk
Sun Feb 23 09:09:06 2020 kern.info kernel: [41411.020866] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-3000 (045e:0779)
Sun Feb 23 09:09:06 2020 kern.info kernel: [41411.083852] input: Microsoft® LifeCam HD-3000: Mi as /devices/platform/1e1c0000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/input/input4
Sun Feb 23 09:09:06 2020 kern.info kernel: [41411.251149] usb 1-2.3: new high-speed USB device number 10 using xhci-mtk
Sun Feb 23 09:09:06 2020 kern.info kernel: [41411.424507] uvcvideo: Found UVC 1.00 device AN-VC500 Camera (043e:3012)
Sun Feb 23 09:09:06 2020 kern.info kernel: [41411.440776] input: AN-VC500 Camera as /devices/platform/1e1c0000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/input/input5
Sun Feb 23 09:09:07 2020 user.info MJPG-streamer [3911]: Error grabbing frames
Sun Feb 23 09:09:07 2020 user.info MJPG-streamer [3911]: cleaning up resources allocated by input thread
Sun Feb 23 09:09:07 2020 user.info MJPG-streamer [3921]: Error grabbing frames
Sun Feb 23 09:09:07 2020 user.info MJPG-streamer [3921]: cleaning up resources allocated by input thread
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: starting application
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: MJPG Streamer Version.: 2.0
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: Using V4L2 device.: /dev/video0
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: Desired Resolution: 640 x 480
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: Frames Per Second.: 10
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: Format............: JPEG
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: TV-Norm...........: DEFAULT
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: www-folder-path......: /www/webcam/
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: HTTP TCP port........: 9090
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: HTTP Listen Address..: (null)
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: username:password....: xxxxxx
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: commands.............: enabled
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: starting input plugin input_uvc.so
Sun Feb 23 09:09:11 2020 user.info MJPG-streamer [6163]: starting output plugin: output_http.so (ID: 00)
Sun Feb 23 09:09:37 2020 authpriv.info dropbear[7159]: Child connection from 22.22.22.160:59953
Sun Feb 23 09:09:42 2020 authpriv.notice dropbear[7159]: Password auth succeeded for 'root' from 22.22.22.160:59953
root@OpenWrt:~# ls -al /dev/video*
crw-------    1 root     root       81,   0 Feb 23 09:09 /dev/video0
crw-------    1 root     root       81,   3 Feb 23 09:09 /dev/video3
crw-------    1 root     root       81,   4 Feb 23 09:09 /dev/video4

Jutro kolega ma przynieść mi garść kamer do pracy bo ja już nie mam żadnej i będę próbował z innymi.

Dodam, że gdy są dwie to działa bez problemu i zawsze startują i nie resetują się.

Jeśli dałoby się to wolałbym mieć 3 kamery ale jak nie to zostanę przy dwóch.

Ktoś ma jakiś pomysł? Może wyłączę flow offloading? Bo i tak mi zbędny jest.

2020-02-20 06:16:30

Nawet widać leży obok na stole czujnik zegarowy, cały stół idealnie prosty. Będę zmieniał jeszcze płytę i założę auto czujnik. Jak na razie drukuje całkiem fajnie. Tu na stole petg wydrukowany. Chyba mi się trafiła dobra sztuka. Ważne jest też dobre jej złożenie i wykasowanie luzów.

Można powiedzieć, że mój r6220 jest w pełni wykorzystany, oczywiście obraz od Cezarego
No i co najważniejsze. Działa non stop z openvpn jako klient. Ostatnio 2tyg bez przerwy, bez rozłączania.

2020-02-19 22:14:55

Jednak udało się podłączyć trzecią ????

Niestety wszystkie działają na 10fps i 640x480

Mi to wystarcza.

Właśnie mocowanie do trzeciej się drukowało

Wszystko na jednej stronie.

2020-02-15 20:08:18

Dokładnie tak, działa Jeszcze tylko muszę to ładnie ustawić dzięki

2020-02-15 18:31:05

Czy istnieje możliwość podglądu z dwóch kamer na jednej stronie www? Jeden obraz pod drugim.

2020-02-15 13:54:48

Mówi się trudno. W sumie 2 mi wystarczą do podglądu.

https://youtu.be/HBor3HCnQMs

2020-02-15 13:17:08

Witam

Po próbie konfiguracji kilku kamer w motion wracam do MJPG-streamer. W motion nie potrafię włączyć kilku kamer. Nie znalazłem też poradnika jak to zrobić

W MJPG-streamer udało mi się podłączyć 2 kamery które działają bez problemu. W motion strasznie obraz był przycinany. Tu działa jak należy.

Obecnie przy próbie podłączenia trzeciej kamery nie działa ona po prostu i zastanawiam się gdzie mogę mieć złe ustawienia.

Konfiguracja init.d

mjpg-streamer

#!/bin/sh /etc/rc.common
# Copyright (C) 2009-2014 OpenWrt.org

START=90
STOP=10

USE_PROCD=1
PROG=/usr/bin/mjpg_streamer

error() {
    echo "${initscript}:" "$@" 1>&2
}

start_instance() {
    local s="$1"

    config_get_bool enabled "$1" 'enabled' 0
    [ $enabled -eq 0 ] && return

    config_get input "$s" 'input'
    if [ -z "$input" ]; then
        error "in section '$s' option input is missing"
        return 1
    fi

    config_get output "$s" 'output'
    if [ -z "$output" ]; then
        error "in section '$s' option output is missing"
        return 1
    fi

    local input_arg
    if [ "x$input" = 'xuvc' ]; then
        input_arg="input_uvc.so"

        config_get device "$s" 'device'
        if [ ! -c "$device" ]; then
            error "device '$device' does not exist"
            return 1
        fi
        input_arg="${input_arg} --device $device"

        config_get fps "$s" 'fps'
        [ -n "$fps" ] && input_arg="${input_arg} --fps $fps"

        config_get_bool yuv "$s" 'yuv' 0
        if [ $yuv -ne 0 ]; then
            input_arg="${input_arg} --yuv"
            config_get quality "$s" 'quality'
            [ -n "$quality" ] && input_arg="${input_arg} --quality $quality"
        fi

        config_get resolution "$s" 'resolution'
        [ -n "$resolution" ] && input_arg="${input_arg} --resolution $resolution"

        config_get led "$s" 'led'
        [ -n "$led" ] && input_arg="${input_arg} --led $led"
    fi

    if [ -z "$input_arg" ]; then
        error "unsuported input option '$input' in section '$s'"
        return 1
    fi

    local output_arg
    if [ "x$output" = 'xhttp' ]; then
        output_arg="output_http.so"

        config_get port "$s" 'port'
        [ -n "$port" ] && output_arg="${output_arg} --port $port"

        config_get listen_ip "$s" 'listen_ip'
        [ -n "$listen_ip" ] && output_arg="${output_arg} --listen $listen_ip"

        config_get www "$s" 'www'
        [ -n "$www" ] && output_arg="${output_arg} --www $www"

        config_get username "$s" 'username'
        config_get password "$s" 'password'
        [ -n "$username" ] && [ -n "$password" ] && output_arg="${output_arg} --credentials $username:$password"
    fi

    if [ "x$output" = 'xfile' ]; then
        output_arg="output_file.so"

        config_get folder "$s" 'folder'
        [ -n "$folder" ] && output_arg="${output_arg} --folder $folder"

        config_get delay "$s" 'delay'
        [ -n "$delay" ] && output_arg="${output_arg} --delay $delay"

        config_get link "$s" 'link'
        [ -n "$link" ] && output_arg="${output_arg} --link $link"

        config_get ringbuffer "$s" 'ringbuffer'
        [ -n "$ringbuffer" ] && output_arg="${output_arg} --size $ringbuffer"

        config_get exceed "$s" 'exceed'
        [ -n "$exceed" ] && output_arg="${output_arg} --exceed $exceed"

        config_get command "$s" 'command'
        [ -n "$command" ] && output_arg="${output_arg} --command $command"

    fi

    if [ -z "$output_arg" ]; then
        error "unsuported output option '$output' in section '$s'"
        return 1
    fi

    procd_open_instance
    procd_set_param command "$PROG" --input "$input_arg" --output "$output_arg"
    [ "x$output" = 'xhttp' ] && procd_add_mdns "http" "tcp" "$port" "daemon=mjpg-streamer"
    procd_close_instance
}

start_service() {
    config_load 'mjpg-streamer'
    config_foreach start_instance 'mjpg-streamer'
}

service_triggers() {
    procd_add_reload_trigger 'mjpg-streamer'
}

mjpg-streamer2

#!/bin/sh /etc/rc.common
# Copyright (C) 2009-2014 OpenWrt.org

START=90
STOP=10

USE_PROCD=1
PROG=/usr/bin/mjpg_streamer

error() {
    echo "${initscript}:" "$@" 1>&2
}

start_instance() {
    local s="$1"

    config_get_bool enabled "$1" 'enabled' 0
    [ $enabled -eq 0 ] && return

    config_get input "$s" 'input'
    if [ -z "$input" ]; then
        error "in section '$s' option input is missing"
        return 1
    fi

    config_get output "$s" 'output'
    if [ -z "$output" ]; then
        error "in section '$s' option output is missing"
        return 1
    fi

    local input_arg
    if [ "x$input" = 'xuvc' ]; then
        input_arg="input_uvc.so"

        device2=/dev/video1
        input_arg="${input_arg} --device $device2"

        config_get fps "$s" 'fps'
        [ -n "$fps" ] && input_arg="${input_arg} --fps $fps"

        config_get_bool yuv "$s" 'yuv' 0
        if [ $yuv -ne 0 ]; then
            input_arg="${input_arg} --yuv"
            config_get quality "$s" 'quality'
            [ -n "$quality" ] && input_arg="${input_arg} --quality $quality"
        fi

        config_get resolution "$s" 'resolution'
        [ -n "$resolution" ] && input_arg="${input_arg} --resolution $resolution"

        config_get led "$s" 'led'
        [ -n "$led" ] && input_arg="${input_arg} --led $led"
    fi

    if [ -z "$input_arg" ]; then
        error "unsuported input option '$input' in section '$s'"
        return 1
    fi

    local output_arg
    if [ "x$output" = 'xhttp' ]; then
        output_arg="output_http.so"

        port2=9091
        [ -n "$port2" ] && output_arg="${output_arg} --port $port2"

        config_get listen_ip "$s" 'listen_ip'
        [ -n "$listen_ip" ] && output_arg="${output_arg} --listen $listen_ip"

        config_get www "$s" 'www'
        [ -n "$www" ] && output_arg="${output_arg} --www $www"

        config_get username "$s" 'username'
        config_get password "$s" 'password'
        [ -n "$username" ] && [ -n "$password" ] && output_arg="${output_arg} --credentials $username:$password"
    fi

    if [ "x$output" = 'xfile' ]; then
        output_arg="output_file.so"

        config_get folder "$s" 'folder'
        [ -n "$folder" ] && output_arg="${output_arg} --folder $folder"

        config_get delay "$s" 'delay'
        [ -n "$delay" ] && output_arg="${output_arg} --delay $delay"

        config_get link "$s" 'link'
        [ -n "$link" ] && output_arg="${output_arg} --link $link"

        config_get ringbuffer "$s" 'ringbuffer'
        [ -n "$ringbuffer" ] && output_arg="${output_arg} --size $ringbuffer"

        config_get exceed "$s" 'exceed'
        [ -n "$exceed" ] && output_arg="${output_arg} --exceed $exceed"

        config_get command "$s" 'command'
        [ -n "$command" ] && output_arg="${output_arg} --command $command"

    fi

    if [ -z "$output_arg" ]; then
        error "unsuported output option '$output' in section '$s'"
        return 1
    fi

    procd_open_instance
    procd_set_param command "$PROG" --input "$input_arg" --output "$output_arg"
    [ "x$output" = 'xhttp' ] && procd_add_mdns "http" "tcp" "$port" "daemon=mjpg-streamer"
    procd_close_instance
}

start_service() {
    config_load 'mjpg-streamer'
    config_foreach start_instance 'mjpg-streamer'
}

service_triggers() {
    procd_add_reload_trigger 'mjpg-streamer'
}

mjpg-streamer3

#!/bin/sh /etc/rc.common
# Copyright (C) 2009-2014 OpenWrt.org

START=90
STOP=10

USE_PROCD=1
PROG=/usr/bin/mjpg_streamer

error() {
    echo "${initscript}:" "$@" 1>&2
}

start_instance() {
    local s="$1"

    config_get_bool enabled "$1" 'enabled' 0
    [ $enabled -eq 0 ] && return

    config_get input "$s" 'input'
    if [ -z "$input" ]; then
        error "in section '$s' option input is missing"
        return 1
    fi

    config_get output "$s" 'output'
    if [ -z "$output" ]; then
        error "in section '$s' option output is missing"
        return 1
    fi

    local input_arg
    if [ "x$input" = 'xuvc' ]; then
        input_arg="input_uvc.so"

        device3=/dev/video2
        input_arg="${input_arg} --device $device3"

        config_get fps "$s" 'fps'
        [ -n "$fps" ] && input_arg="${input_arg} --fps $fps"

        config_get_bool yuv "$s" 'yuv' 0
        if [ $yuv -ne 0 ]; then
            input_arg="${input_arg} --yuv"
            config_get quality "$s" 'quality'
            [ -n "$quality" ] && input_arg="${input_arg} --quality $quality"
        fi

        config_get resolution "$s" 'resolution'
        [ -n "$resolution" ] && input_arg="${input_arg} --resolution $resolution"

        config_get led "$s" 'led'
        [ -n "$led" ] && input_arg="${input_arg} --led $led"
    fi

    if [ -z "$input_arg" ]; then
        error "unsuported input option '$input' in section '$s'"
        return 1
    fi

    local output_arg
    if [ "x$output" = 'xhttp' ]; then
        output_arg="output_http.so"

        port3=9092
        [ -n "$port3" ] && output_arg="${output_arg} --port $port3"

        config_get listen_ip "$s" 'listen_ip'
        [ -n "$listen_ip" ] && output_arg="${output_arg} --listen $listen_ip"

        config_get www "$s" 'www'
        [ -n "$www" ] && output_arg="${output_arg} --www $www"

        config_get username "$s" 'username'
        config_get password "$s" 'password'
        [ -n "$username" ] && [ -n "$password" ] && output_arg="${output_arg} --credentials $username:$password"
    fi

    if [ "x$output" = 'xfile' ]; then
        output_arg="output_file.so"

        config_get folder "$s" 'folder'
        [ -n "$folder" ] && output_arg="${output_arg} --folder $folder"

        config_get delay "$s" 'delay'
        [ -n "$delay" ] && output_arg="${output_arg} --delay $delay"

        config_get link "$s" 'link'
        [ -n "$link" ] && output_arg="${output_arg} --link $link"

        config_get ringbuffer "$s" 'ringbuffer'
        [ -n "$ringbuffer" ] && output_arg="${output_arg} --size $ringbuffer"

        config_get exceed "$s" 'exceed'
        [ -n "$exceed" ] && output_arg="${output_arg} --exceed $exceed"

        config_get command "$s" 'command'
        [ -n "$command" ] && output_arg="${output_arg} --command $command"

    fi

    if [ -z "$output_arg" ]; then
        error "unsuported output option '$output' in section '$s'"
        return 1
    fi

    procd_open_instance
    procd_set_param command "$PROG" --input "$input_arg" --output "$output_arg"
    [ "x$output" = 'xhttp' ] && procd_add_mdns "http" "tcp" "$port" "daemon=mjpg-streamer"
    procd_close_instance
}

start_service() {
    config_load 'mjpg-streamer'
    config_foreach start_instance 'mjpg-streamer'
}

service_triggers() {
    procd_add_reload_trigger 'mjpg-streamer'
}

Konfiguracja config

mjpg-streamer

config mjpg-streamer 'core'
    option quality '80'
    option www '/www/webcam'
    option port '9090'
    option led 'blink'
    option enable_auth '1'
    option username 'xxx'
    option password 'xxx'
    option device '/dev/video0'
    option resolution '1280x720'
    option fps '10'
    option enabled '1'
    option input 'uvc'
    option output 'http'

mjpg-streamer2

config mjpg-streamer 'core'
    option quality '80'
    option www '/www/webcam'
    option port '9091'
    option led 'blink'
    option enable_auth '1'
    option username 'xxx'
    option password 'xxx'
    option device '/dev/video1'
    option resolution '1280x720'
    option fps '10'
    option enabled '1'
    option input 'uvc'
    option output 'http'

mjpg-streamer3

config mjpg-streamer 'core'
    option quality '80'
    option www '/www/webcam'
    option port '9092'
    option led 'blink'
    option enable_auth '1'
    option username 'xxx'
    option password 'xxx'
    option device '/dev/video2'
    option resolution '1280x720'
    option fps '10'
    option enabled '1'
    option input 'uvc'
    option output 'http'

2020-02-14 13:26:31

Dźwięk mi zbędny obraz na drukarkę 3D chciałbym mieć z dwóch kamer

2020-02-13 23:18:36

Używam mjpg-streamer i z tego co widziałem to jest to to zrobienia.

Może ktoś robił już coś takiego?

2020-02-13 21:21:53

Powiedz mi proszę jeszcze tylko czy da się podłączyć dwie kamery i mieć do nich dostęp bez przełączania po prostu na innych portach?

2020-02-13 20:42:33

Witam

Podłączyłem taką kamerę ale chyba nie ma wszystkich sterowników. Dostępne są bo jakoś nie mogę namierzyć. Niby obraz działa ale chciałbym się upewnić, że wszystko jest dobrze zainstalowane. Dźwięk też powinien być? Na tej liście jej nie ma https://eko.one.pl/?p=openwrt-webcam

 T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=046d ProdID=0809 Rev= 0.10
S:  SerialNumber=ACA12FA9
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
A:  FirstIf#= 2 IfCount= 2 Cls=01(audio) Sub=02 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E:  Ad=87(I) Atr=03(Int.) MxPS=  16 Ivl=16ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I:  If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 192 Ivl=125us
I:  If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 384 Ivl=125us
I:  If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us
I:* If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 640 Ivl=125us
I:  If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 800 Ivl=125us
I:  If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS= 944 Ivl=125us
I:  If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1280 Ivl=125us
I:  If#= 1 Alt= 8 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1600 Ivl=125us
I:  If#= 1 Alt= 9 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=1984 Ivl=125us
I:  If#= 1 Alt=10 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=2688 Ivl=125us
I:  If#= 1 Alt=11 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=05(Isoc) MxPS=3060 Ivl=125us
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I:  If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS=  68 Ivl=1ms
I:  If#= 3 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS= 100 Ivl=1ms
I:  If#= 3 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS= 132 Ivl=1ms
I:  If#= 3 Alt= 4 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E:  Ad=86(I) Atr=05(Isoc) MxPS= 196 Ivl=1ms

2020-01-30 12:07:18

Adres serwera mam po ddns i jest publiczny.

Wydaje mi się, że fotrinet który mamy w pracy blokuje wszystko bo czasami nawet jak wchodzę przez ddns na swój router to albo puści albo nie, loteria. Zauważyłem, że z laptopa firmowego też czasami mam problem. Ogólnie temat do odpuszczenia bo docelowo tu nie będzie działać.

Aby nie zakładać nowego tematu. Wireguard dużo potrzebuje miejsca w zasobach? Na routerze z flash 4MB ruszy?

2020-01-29 14:27:45

R6220 działa jako klient. Certyfikat zaciągałem przez luci z rozszerzeniem .ovpn

Bez zmiany czegokolwiek podaję mu internet z czystego UPC robiąc klienta po 2.4GHz i wszystko się łączy.

Ten sam certyfikat podaję w openvpn gui i wszystko jest ok.

Pliki .ovpn generuję z mir3g (padavan)

2020-01-29 14:11:10

Taki log wypluwa, cały czas się zapętla

Wed Jan 29 14:02:10 2020 daemon.notice openvpn(openwrt)[2623]: SIGUSR1[soft,tls-error] received, process restarting
Wed Jan 29 14:02:10 2020 daemon.notice openvpn(openwrt)[2623]: Restart pause, 10 second(s)
Wed Jan 29 14:02:20 2020 daemon.warn openvpn(openwrt)[2623]: WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.
Wed Jan 29 14:02:20 2020 daemon.notice openvpn(openwrt)[2623]: TCP/UDP: Preserving recently used remote address: [AF_INET]xxxxxx:1194
Wed Jan 29 14:02:20 2020 daemon.notice openvpn(openwrt)[2623]: Socket Buffers: R=[163840->163840] S=[163840->163840]
Wed Jan 29 14:02:20 2020 daemon.notice openvpn(openwrt)[2623]: UDP link local: (not bound)
Wed Jan 29 14:02:20 2020 daemon.notice openvpn(openwrt)[2623]: UDP link remote: [AF_INET]xxxxxxxx:1194
Wed Jan 29 14:02:22 2020 daemon.err openvpn(openwrt)[2623]: TLS Error: Unroutable control packet received from [AF_INET]xxxxxx:1194 (si=3 op=P_ACK_V1)
Wed Jan 29 14:02:26 2020 daemon.err openvpn(openwrt)[2623]: TLS Error: Unroutable control packet received from [AF_INET]xxxxxx:1194 (si=3 op=P_ACK_V1)
Wed Jan 29 14:02:34 2020 daemon.err openvpn(openwrt)[2623]: TLS Error: Unroutable control packet received from [AF_INET]xxxxxx:1194 (si=3 op=P_ACK_V1)
Wed Jan 29 14:03:21 2020 daemon.err openvpn(openwrt)[2623]: TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Wed Jan 29 14:03:21 2020 daemon.err openvpn(openwrt)[2623]: TLS Error: TLS handshake failed
Wed Jan 29 14:03:21 2020 daemon.notice openvpn(openwrt)[2623]: SIGUSR1[soft,tls-error] received, process restarting
Wed Jan 29 14:03:21 2020 daemon.notice openvpn(openwrt)[2623]: Restart pause, 20 second(s)

2020-01-29 12:01:31

Docelowo i tak nie będzie podłączony do firmowej sieci. Spojrzę później i dam znać

2020-01-29 11:20:26

Tak tak z tym luci to wiem. Konsoli też używam

Zastanawia mnie tylko jeszcze jedna rzecz. Laptop mam w firmie podłączony do firmowej sieci lan. Aplikacja na nim zainstalowana openvpn gui łączy mnie bez problemu. R6220 podłączony do tej samej sieci przez wan już się nie łączy. Co może być przyczyną?

2020-01-29 09:28:59

Dopytam jeszcze jedną rzecz.

Czy client openvpn (w tym przypadku R6220) po rozłączeniu sieci połączy się ponownie? W luci nie widzę konfiguracji do tego. Da się ustalić ile razy ma próbować ponownie? Czy jest to jakoś z automatu?

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Opcje wyszukiwania (Strona 21 z 24)

Znalezione posty: 501 do 525 z 599

501 Odpowiedź przez palibrzuch 2020-02-26 20:40:30

Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)

502 Odpowiedź przez palibrzuch 2020-02-26 19:55:34

Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)

503 Odpowiedź przez palibrzuch 2020-02-26 19:39:37

Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)

504 Odpowiedź przez palibrzuch 2020-02-24 07:28:39

Odp: dziwny problem z hubem i kamerami na r6220 (6 odpowiedzi, napisanych Oprogramowanie / Software)

505 Odpowiedź przez palibrzuch 2020-02-23 18:22:57

Odp: dziwny problem z hubem i kamerami na r6220 (6 odpowiedzi, napisanych Oprogramowanie / Software)

506 Odpowiedź przez palibrzuch 2020-02-23 16:42:41

Odp: dziwny problem z hubem i kamerami na r6220 (6 odpowiedzi, napisanych Oprogramowanie / Software)

507 Odpowiedź przez palibrzuch 2020-02-23 12:18:14

Odp: Wykorzystanie łącza gigabit (48 odpowiedzi, napisanych Oprogramowanie / Software)

508 Odpowiedź przez palibrzuch 2020-02-23 11:32:21

Odp: Wykorzystanie łącza gigabit (48 odpowiedzi, napisanych Oprogramowanie / Software)

509 Temat przez palibrzuch 2020-02-23 11:20:27

Temat: dziwny problem z hubem i kamerami na r6220 (6 odpowiedzi, napisanych Oprogramowanie / Software)

510 Odpowiedź przez palibrzuch 2020-02-20 06:16:30

Odp: MJPG-streamer kilka kamer (10 odpowiedzi, napisanych Oprogramowanie / Software)

511 Odpowiedź przez palibrzuch 2020-02-19 22:14:55

Odp: MJPG-streamer kilka kamer (10 odpowiedzi, napisanych Oprogramowanie / Software)

512 Odpowiedź przez palibrzuch 2020-02-15 20:08:18

Odp: MJPG-streamer kilka kamer (10 odpowiedzi, napisanych Oprogramowanie / Software)

513 Odpowiedź przez palibrzuch 2020-02-15 18:31:05

Odp: MJPG-streamer kilka kamer (10 odpowiedzi, napisanych Oprogramowanie / Software)

514 Odpowiedź przez palibrzuch 2020-02-15 13:54:48

Odp: MJPG-streamer kilka kamer (10 odpowiedzi, napisanych Oprogramowanie / Software)

515 Temat przez palibrzuch 2020-02-15 13:17:08

Temat: MJPG-streamer kilka kamer (10 odpowiedzi, napisanych Oprogramowanie / Software)

516 Odpowiedź przez palibrzuch 2020-02-14 13:26:31

Odp: 046d:0809 Logitech Webcam Pro 9000 Logitech (7 odpowiedzi, napisanych Sprzęt / Hardware)

517 Odpowiedź przez palibrzuch 2020-02-13 23:18:36

Odp: 046d:0809 Logitech Webcam Pro 9000 Logitech (7 odpowiedzi, napisanych Sprzęt / Hardware)

518 Odpowiedź przez palibrzuch 2020-02-13 21:21:53

Odp: 046d:0809 Logitech Webcam Pro 9000 Logitech (7 odpowiedzi, napisanych Sprzęt / Hardware)

519 Temat przez palibrzuch 2020-02-13 20:42:33

Temat: 046d:0809 Logitech Webcam Pro 9000 Logitech (7 odpowiedzi, napisanych Sprzęt / Hardware)

520 Odpowiedź przez palibrzuch 2020-01-30 12:07:18

Odp: openvpn problem (18 odpowiedzi, napisanych Oprogramowanie / Software)

521 Odpowiedź przez palibrzuch 2020-01-29 14:27:45

Odp: openvpn problem (18 odpowiedzi, napisanych Oprogramowanie / Software)

522 Odpowiedź przez palibrzuch 2020-01-29 14:11:10

Odp: openvpn problem (18 odpowiedzi, napisanych Oprogramowanie / Software)

523 Odpowiedź przez palibrzuch 2020-01-29 12:01:31

Odp: openvpn problem (18 odpowiedzi, napisanych Oprogramowanie / Software)

524 Odpowiedź przez palibrzuch 2020-01-29 11:20:26

Odp: openvpn problem (18 odpowiedzi, napisanych Oprogramowanie / Software)

525 Odpowiedź przez palibrzuch 2020-01-29 09:28:59

Odp: openvpn problem (18 odpowiedzi, napisanych Oprogramowanie / Software)

Znalezione posty: 501 do 525 z 599