szukam routera tak aby zminic na nim soft na openWRT(gorgulec LUCI) ,mozna było podpiąc do niego modem E3372 hilink i aby zasię WI-Fi był bardzo dobry tzn tak aby mozna było swobodnie korzystac w całym domu cena max do 400 pln jak sie da to i taniej.
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 2 z 8)
eko.one.pl → Posty przez mrrowek
Znalezione posty: 26 do 50 z 185
26 2015-04-24 17:29:06
Temat: jaki router do Hilinka E3372 LTE z duużym zasięgiem (0 odpowiedzi, napisanych Oprogramowanie / Software)
27 2015-04-24 10:29:13
Odp: znika internet (54 odpowiedzi, napisanych Oprogramowanie / Software)
I jak jest w końcu z tą dzierżawą DHCP? Domyślnie jest na 12 godz. ustawiona
28 2015-04-23 19:31:20
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
ups
mea kulpa
29 2015-04-23 12:39:30
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
modem nie nie wiem jak dysk , ja go mam głównie dla modemu LTE a transfery sa różne max 25MB/s ale to nie ograniczenie routera a sieci i obciązenia, na ułakem sekundy to wskazówka speedtestu wychyla się czasami i 60MB/s
30 2015-04-23 07:21:23
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
w domu jednorodzinnym na poziomie piętra jest ok trochę gorzej na parterze bo inny poziom ,.
31 2015-04-22 16:30:57
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
thx działa
w neonecie jest/była wyprzedaż
32 2015-04-22 11:13:09
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
33 2015-04-22 11:03:39
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
Sat Mar 28 08:57:39 2015 kern.notice kernel: [ 7.270000] SCSI subsystem initialized
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.280000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.290000] ehci-platform: EHCI generic platform driver
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.300000] ehci-platform ehci-platform: EHCI Host Controller
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.300000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.310000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.340000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.340000] hub 1-0:1.0: USB hub found
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.340000] hub 1-0:1.0: 1 port detected
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.350000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.360000] usbcore: registered new interface driver usb-storage
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 7.890000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 8.340000] usb-storage 1-1:1.0: USB Mass Storage device detected
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 8.350000] scsi0 : usb-storage 1-1:1.0
Sat Mar 28 08:57:39 2015 kern.notice kernel: [ 9.350000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Sat Mar 28 08:57:39 2015 kern.notice kernel: [ 9.360000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Sat Mar 28 08:57:39 2015 kern.notice kernel: [ 9.370000] sd 0:0:0:1: [sda] Attached SCSI removable disk
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 11.090000] eth1: link up (1000Mbps/Full duplex)
Sat Mar 28 08:57:39 2015 kern.notice kernel: [ 13.270000] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (1 unchecked, 1 orphan) and 52 of xref (0 dead, 28 orphan) found.
Sat Mar 28 08:57:39 2015 user.info kernel: [ 13.290000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Sat Mar 28 08:57:39 2015 user.err kernel: [ 13.290000] block: unable to load configuration (fstab: Entry not found)
Sat Mar 28 08:57:39 2015 user.info kernel: [ 13.300000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
Sat Mar 28 08:57:39 2015 user.info kernel: [ 13.320000] block: extroot: not configured
Sat Mar 28 08:57:39 2015 kern.notice kernel: [ 13.360000] jffs2: notice: (374) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (1 unchecked, 1 orphan) and 52 of xref (0 dead, 28 orphan) found.
Sat Mar 28 08:57:39 2015 user.info kernel: [ 13.610000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Sat Mar 28 08:57:39 2015 user.err kernel: [ 13.610000] block: unable to load configuration (fstab: Entry not found)
Sat Mar 28 08:57:39 2015 user.info kernel: [ 13.620000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
Sat Mar 28 08:57:39 2015 user.info kernel: [ 13.630000] block: extroot: not configured
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 13.660000] eth1: link down
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 18.310000] NET: Registered protocol family 10
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 18.350000] l2tp_core: L2TP core driver, V2.0
Sat Mar 28 08:57:39 2015 kern.info kernel: [ 18.360000] l2tp_netlink: L2TP netlink interface
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.370000] gre: GRE over IPv4 demultiplexor driver
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.390000] ip_gre: GRE over IPv4 tunneling driver
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.410000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.430000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.470000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.470000] Backport generated by backports.git backports-20140320-37-g5c33da0
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.520000] cfg80211: Calling CRDA to update world regulatory domain
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.520000] cfg80211: World regulatory domain updated:
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.530000] cfg80211: DFS Master region: unset
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.540000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.550000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.560000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.570000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.570000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.580000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.590000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.600000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.720000] u32 classifier
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.720000] input device check on
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.720000] Actions configured
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.730000] Mirror/redirect action on
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.750000] fuse init (API version 7.22)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.820000] usbcore: registered new interface driver cdc_acm
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.820000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.840000] usbcore: registered new interface driver cdc_wdm
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.860000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.920000] usbcore: registered new interface driver usblp
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.960000] usbcore: registered new interface driver usbserial
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.970000] usbcore: registered new interface driver usbserial_generic
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 18.990000] usbserial: USB Serial support registered for generic
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.070000] xt_time: kernel timezone is -0000
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.090000] usbcore: registered new interface driver cdc_ether
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.110000] usbcore: registered new interface driver cdc_ncm
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.130000] usbcore: registered new interface driver huawei_cdc_ncm
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.170000] PPP generic driver version 2.4.2
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.170000] PPP MPPE Compression module registered
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.190000] NET: Registered protocol family 24
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.190000] PPTP driver version 0.8.5
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.210000] usbcore: registered new interface driver qmi_wwan
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.230000] usbcore: registered new interface driver rndis_host
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.230000] usbcore: registered new interface driver sierra
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.250000] usbserial: USB Serial support registered for Sierra USB modem
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.250000] usbcore: registered new interface driver sierra_net
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.290000] ath: EEPROM regdomain: 0x0
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.290000] ath: EEPROM indicates default country code should be used
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.290000] ath: doing EEPROM country->regdmn map search
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.290000] ath: country maps to regdmn code: 0x3a
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.290000] ath: Country alpha2 being used: US
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.290000] ath: Regpair used: 0x3a
Sat Mar 28 08:57:40 2015 kern.debug kernel: [ 19.310000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.310000] cfg80211: Calling CRDA for country: US
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.320000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.330000] cfg80211: Regulatory domain changed to country: US
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.330000] cfg80211: DFS Master region: FCC
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.340000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.340000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.350000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.360000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.370000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.380000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.390000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.410000] usbcore: registered new interface driver option
Sat Mar 28 08:57:40 2015 kern.info kernel: [ 19.410000] usbserial: USB Serial support registered for GSM modem (1-port)
Sat Mar 28 08:57:43 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Sat Mar 28 08:57:43 2015 kern.info kernel: [ 25.220000] usb 1-1: USB disconnect, device number 2
Sat Mar 28 08:57:43 2015 user.err syslog: /dev/mtdblock3 is already mounted
Sat Mar 28 08:57:43 2015 user.emerg syslog: block: /dev/mtdblock3 is already mounted
Sat Mar 28 08:57:43 2015 kern.info kernel: [ 25.800000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Sat Mar 28 08:57:44 2015 kern.info kernel: [ 25.960000] cdc_ether 1-1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Sat Mar 28 08:57:44 2015 kern.info kernel: [ 26.070000] usb-storage 1-1:1.2: USB Mass Storage device detected
Sat Mar 28 08:57:44 2015 kern.info kernel: [ 26.070000] scsi1 : usb-storage 1-1:1.2
Sat Mar 28 08:57:45 2015 kern.notice kernel: [ 27.480000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Sat Mar 28 08:57:45 2015 kern.notice kernel: [ 27.550000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Sat Mar 28 08:57:46 2015 authpriv.info dropbear[1269]: Not backgrounding
Sat Mar 28 08:57:47 2015 user.err syslog: Unkown action change
Sat Mar 28 08:57:47 2015 user.err syslog: Unkown action change
Sat Mar 28 08:57:49 2015 user.err syslog: module is already loaded - xt_multiport
Sat Mar 28 08:57:49 2015 user.err syslog: module is already loaded - xt_comment
Sat Mar 28 08:57:49 2015 user.err syslog: module is already loaded - xt_length
Sat Mar 28 08:57:51 2015 user.err syslog: module is already loaded - xt_multiport
Sat Mar 28 08:57:51 2015 user.err syslog: module is already loaded - xt_comment
Sat Mar 28 08:57:51 2015 user.err syslog: module is already loaded - xt_length
Sat Mar 28 08:57:53 2015 kern.info kernel: [ 35.290000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sat Mar 28 08:57:53 2015 kern.info kernel: [ 35.290000] device eth1 entered promiscuous mode
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'lan' is enabled
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'lan' is setting up now
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'lan' is now up
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'loopback' is enabled
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'loopback' is now up
Sat Mar 28 08:57:53 2015 kern.info kernel: [ 35.310000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sat Mar 28 08:57:53 2015 kern.info kernel: [ 35.320000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'wan' is enabled
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Network device 'lo' link is up
Sat Mar 28 08:57:53 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.520000] cfg80211: Calling CRDA for country: PL
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.520000] cfg80211: Regulatory domain changed to country: PL
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.530000] cfg80211: DFS Master region: ETSI
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.540000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.560000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.570000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Sat Mar 28 08:57:54 2015 kern.info kernel: [ 36.580000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Sat Mar 28 08:57:55 2015 kern.info kernel: [ 36.920000] eth1: link up (1000Mbps/Full duplex)
Sat Mar 28 08:57:55 2015 kern.info kernel: [ 36.920000] br-lan: port 1(eth1) entered forwarding state
Sat Mar 28 08:57:55 2015 kern.info kernel: [ 36.930000] br-lan: port 1(eth1) entered forwarding state
Sat Mar 28 08:57:55 2015 kern.info kernel: [ 36.930000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sat Mar 28 08:57:55 2015 daemon.notice netifd: Network device 'eth1' link is up
Sat Mar 28 08:57:55 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Sat Mar 28 08:57:55 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Mar 28 08:57:55 2015 kern.info kernel: [ 36.960000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sat Mar 28 08:57:55 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Mar 28 08:57:57 2015 kern.info kernel: [ 38.930000] br-lan: port 1(eth1) entered forwarding state
Sat Mar 28 08:57:57 2015 daemon.crit xl2tpd[1728]: setsockopt recvref[30]: Protocol not available
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1728]: Using l2tp kernel support.
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1741]: xl2tpd version xl2tpd-1.3.6 started on OpenWrt PID:1741
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1741]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
Sat Mar 28 08:57:57 2015 kern.info kernel: [ 39.360000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1741]: Forked by Scott Balmos and David Stipp, (C) 2001
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1741]: Inherited by Jeff McAdams, (C) 2002
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1741]: Forked again by Xelerance (www.xelerance.com) (C) 2006
Sat Mar 28 08:57:57 2015 daemon.info xl2tpd[1741]: Listening on IP address 0.0.0.0, port 1701
Sat Mar 28 08:57:57 2015 kern.info kernel: [ 39.390000] device wlan0 entered promiscuous mode
Sat Mar 28 08:57:57 2015 kern.info kernel: [ 39.390000] br-lan: port 2(wlan0) entered forwarding state
Sat Mar 28 08:57:57 2015 kern.info kernel: [ 39.390000] br-lan: port 2(wlan0) entered forwarding state
Sat Mar 28 08:57:57 2015 kern.info kernel: [ 39.660000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Mar 28 08:57:58 2015 daemon.notice netifd: Network device 'wlan0' link is up
Sat Mar 28 08:57:59 2015 kern.info kernel: [ 41.390000] br-lan: port 2(wlan0) entered forwarding state
Sat Mar 28 08:57:59 2015 user.emerg syslog: - init complete -
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq[1832]: started, version 2.71 cachesize 150
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq[1832]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq-dhcp[1832]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq[1832]: using local addresses only for domain lan
Sat Mar 28 08:58:03 2015 daemon.warn dnsmasq[1832]: no servers found in /tmp/resolv.conf.auto, will retry
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq[1832]: read /etc/hosts - 1 addresses
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq[1832]: read /tmp/hosts/dhcp - 1 addresses
Sat Mar 28 08:58:03 2015 daemon.info dnsmasq-dhcp[1832]: read /etc/ethers - 0 addresses
Sat Mar 28 08:58:05 2015 user.notice upnp daemon: external interface not found, not starting
Sat Mar 28 08:58:06 2015 daemon.info dnsmasq-dhcp[1832]: DHCPREQUEST(br-lan) 192.168.1.122 bc:5f:f4:48:81:02
Sat Mar 28 08:58:06 2015 daemon.info dnsmasq-dhcp[1832]: DHCPACK(br-lan) 192.168.1.122 bc:5f:f4:48:81:02 ANdrzej
Sat Mar 28 09:04:01 2015 daemon.notice netifd: Interface 'wan' is disabled
Sat Mar 28 09:04:01 2015 kern.info kernel: [ 403.230000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sat Mar 28 09:04:01 2015 daemon.notice netifd: Interface 'wan' is enabled
Sat Mar 28 09:04:01 2015 daemon.notice netifd: Interface 'wan' is disabled
Sat Mar 28 09:04:01 2015 daemon.notice netifd: Interface 'wan' is enabled
Sat Mar 28 09:04:01 2015 kern.info kernel: [ 403.290000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
34 2015-04-22 11:02:39
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
reset pomógl
zamieszczam log
2014.04 unknown) ) #9 Sat Mar 28 08:55:37 CET 2015
[ 0.000000] MyLoader: sysp=ad2c3173, boardp=242d95ab, parts=ddad436b
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.00 0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-0000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80338b60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR710N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28588k/32768k available (2386k kernel code, 4180k reserved, 620k data, 256k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-WR710N v1
[ 0.550000] bio: create slab <bio-0> at 0
[ 0.560000] Switching to clocksource MIPS
[ 0.570000] NET: Registered protocol family 2
[ 0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.570000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.570000] TCP: Hash tables configured (established 512 bind 512)
[ 0.580000] TCP: reno registered
[ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] NET: Registered protocol family 1
[ 0.600000] PCI: CLS 0 bytes, default 32
[ 0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.640000] msgmni has been set to 55
[ 0.640000] io scheduler noop registered
[ 0.640000] io scheduler deadline registered (default)
[ 0.650000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.670000] console [ttyATH0] enabled, bootconsole disabled
[ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.690000] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.690000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.700000] 5 tp-link partitions found on MTD device spi0.0
[ 0.700000] Creating 5 MTD partitions on "spi0.0":
[ 0.710000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.720000] 0x000000020000-0x00000013031c : "kernel"
[ 0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.730000] 0x00000013031c-0x0000007f0000 : "rootfs"
[ 0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.750000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.760000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.760000] 0x000000670000-0x0000007f0000 : "rootfs_data"
[ 0.770000] 0x0000007f0000-0x000000800000 : "art"
[ 0.770000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.800000] libphy: ag71xx_mdio: probed
[ 1.350000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 1.360000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.910000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
[ 2.950000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.950000] TCP: cubic registered
[ 2.960000] NET: Registered protocol family 17
[ 2.960000] Bridge firewalling registered
[ 2.960000] 8021q: 802.1Q VLAN Support v1.8
[ 2.970000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.980000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.990000] Freeing unused kernel memory: 256K (80350000 - 80390000)
[ 7.210000] usbcore: registered new interface driver usbfs
[ 7.220000] usbcore: registered new interface driver hub
[ 7.220000] usbcore: registered new device driver usb
[ 7.270000] SCSI subsystem initialized
[ 7.280000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.290000] ehci-platform: EHCI generic platform driver
[ 7.300000] ehci-platform ehci-platform: EHCI Host Controller
[ 7.300000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 7.310000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 7.340000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 7.340000] hub 1-0:1.0: USB hub found
[ 7.340000] hub 1-0:1.0: 1 port detected
[ 7.350000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.360000] usbcore: registered new interface driver usb-storage
[ 7.890000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 8.340000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 8.350000] scsi0 : usb-storage 1-1:1.0
[ 9.350000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 9.360000] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 9.370000] sd 0:0:0:1: [sda] Attached SCSI removable disk
[ 11.090000] eth1: link up (1000Mbps/Full duplex)
[ 13.270000] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (1 unchecked, 1 orphan) and 52 of xref (0 dead, 28 orphan) found.
[ 13.290000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 13.290000] block: unable to load configuration (fstab: Entry not found)
[ 13.300000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 13.320000] block: extroot: not configured
[ 13.360000] jffs2: notice: (374) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (1 unchecked, 1 orphan) and 52 of xref (0 dead, 28 orphan) found.
[ 13.610000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 13.610000] block: unable to load configuration (fstab: Entry not found)
[ 13.620000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 13.630000] block: extroot: not configured
[ 13.660000] eth1: link down
[ 18.310000] NET: Registered protocol family 10
[ 18.350000] l2tp_core: L2TP core driver, V2.0
[ 18.360000] l2tp_netlink: L2TP netlink interface
[ 18.370000] gre: GRE over IPv4 demultiplexor driver
[ 18.390000] ip_gre: GRE over IPv4 tunneling driver
[ 18.410000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
[ 18.430000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.470000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 18.470000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 18.520000] cfg80211: Calling CRDA to update world regulatory domain
[ 18.520000] cfg80211: World regulatory domain updated:
[ 18.530000] cfg80211: DFS Master region: unset
[ 18.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.540000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.550000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.560000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.570000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.570000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.580000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.590000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.600000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.720000] u32 classifier
[ 18.720000] input device check on
[ 18.720000] Actions configured
[ 18.730000] Mirror/redirect action on
[ 18.750000] fuse init (API version 7.22)
[ 18.820000] usbcore: registered new interface driver cdc_acm
[ 18.820000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 18.840000] usbcore: registered new interface driver cdc_wdm
[ 18.860000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.920000] usbcore: registered new interface driver usblp
[ 18.960000] usbcore: registered new interface driver usbserial
[ 18.970000] usbcore: registered new interface driver usbserial_generic
[ 18.990000] usbserial: USB Serial support registered for generic
[ 19.070000] xt_time: kernel timezone is -0000
[ 19.090000] usbcore: registered new interface driver cdc_ether
[ 19.110000] usbcore: registered new interface driver cdc_ncm
[ 19.130000] usbcore: registered new interface driver huawei_cdc_ncm
[ 19.170000] PPP generic driver version 2.4.2
[ 19.170000] PPP MPPE Compression module registered
[ 19.190000] NET: Registered protocol family 24
[ 19.190000] PPTP driver version 0.8.5
[ 19.210000] usbcore: registered new interface driver qmi_wwan
[ 19.230000] usbcore: registered new interface driver rndis_host
[ 19.230000] usbcore: registered new interface driver sierra
[ 19.250000] usbserial: USB Serial support registered for Sierra USB modem
[ 19.250000] usbcore: registered new interface driver sierra_net
[ 19.290000] ath: EEPROM regdomain: 0x0
[ 19.290000] ath: EEPROM indicates default country code should be used
[ 19.290000] ath: doing EEPROM country->regdmn map search
[ 19.290000] ath: country maps to regdmn code: 0x3a
[ 19.290000] ath: Country alpha2 being used: US
[ 19.290000] ath: Regpair used: 0x3a
[ 19.310000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.310000] cfg80211: Calling CRDA for country: US
[ 19.320000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 19.330000] cfg80211: Regulatory domain changed to country: US
[ 19.330000] cfg80211: DFS Master region: FCC
[ 19.340000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.340000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.350000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 19.360000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 19.370000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.380000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 19.390000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 19.410000] usbcore: registered new interface driver option
[ 19.410000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 25.220000] usb 1-1: USB disconnect, device number 2
[ 25.800000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 25.960000] cdc_ether 1-1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[ 26.070000] usb-storage 1-1:1.2: USB Mass Storage device detected
[ 26.070000] scsi1 : usb-storage 1-1:1.2
[ 27.480000] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 27.550000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 35.290000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.290000] device eth1 entered promiscuous mode
[ 35.310000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 35.320000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.520000] cfg80211: Calling CRDA for country: PL
[ 36.520000] cfg80211: Regulatory domain changed to country: PL
[ 36.530000] cfg80211: DFS Master region: ETSI
[ 36.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 36.540000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 36.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 36.560000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[ 36.570000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[ 36.580000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 36.920000] eth1: link up (1000Mbps/Full duplex)
[ 36.920000] br-lan: port 1(eth1) entered forwarding state
[ 36.930000] br-lan: port 1(eth1) entered forwarding state
[ 36.930000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 36.960000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 38.930000] br-lan: port 1(eth1) entered forwarding state
[ 39.360000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.390000] device wlan0 entered promiscuous mode
[ 39.390000] br-lan: port 2(wlan0) entered forwarding state
[ 39.390000] br-lan: port 2(wlan0) entered forwarding state
[ 39.660000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.390000] br-lan: port 2(wlan0) entered forwarding state
[ 403.230000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 403.290000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
35 2015-04-22 10:12:53
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
teraz mam juz wiekszy problem
cos poklikałem coś ponaciskalem rozłaczyłem się i nie mogę się zalogować na router
36 2015-04-22 09:36:17
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
ale w jakiej zakladce?
jesli mozna prosic to tak lopatologicznie
37 2015-04-22 09:12:58
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
jak w luci ustawić hilibka w LTE?
zeby działalo tak jak w gorgulcu
38 2015-04-22 07:56:25
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
thx
robi sie to tak samo jak gorgulca?
39 2015-04-21 21:12:47
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
Wersja routera to v.1.2
40 2015-04-20 20:28:15
Odp: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
to wiem ,
jak dotrze to sprawdze
41 2015-04-20 19:02:48
Temat: TP LINK WR710N i LUCI (28 odpowiedzi, napisanych Oprogramowanie / Software)
czy z tej str
http://dl.eko.one.pl/luci/barrier_breaker/ar71xx/
pobiorę pełne Luci do WR710N i czy ma znaczenie v1 czy to v2?
42 2015-04-02 12:50:03
Odp: Dziwne zachowanie modemu zwarcie anten? (2 odpowiedzi, napisanych Oprogramowanie / Software)
mam cos podobnego ale muszę najpierw ustawic ponownie antenę bo mozę przez te wichury co nie co ja obróciło, wcześniej mialem też _51db a terazod 59 do 79-81 db jak złapie mi inny nadajni to mam -59db ale zmienia mi się tylko wspólczynnik RSSI , RSCP mam caly czas staly antena to cybertech 15 (mimo) jak sie zrobi cieplej założe sorensena tez 15 ale juz inne przewody nie H155tylko chyba RF240 jak dobrze pamiętam/. mi nie rzołacza netu
43 2015-01-19 18:50:58
Odp: Rozłączanie WDR4300 (6 odpowiedzi, napisanych Oprogramowanie / Software)
Nawet jak ma kartę Play to co z tego , to że u ciebie nie znaczy że i u niego.
44 2015-01-11 19:26:08
Odp: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
eeh
zostaje wiec 710
45 2015-01-11 19:16:47
Odp: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
Sapido RB-1830
Tp-Link WR1024ND
Asus RT-N10U
Netgear DGN2200
MARKI AIR LIVE 3G
który?
i który z nich ma wsparcie gorgulca?
do wr710n znalazłem gorgulca
46 2015-01-11 16:54:35
Odp: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
a jakie np?
47 2015-01-11 16:44:17
Odp: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
a jakie np?
48 2015-01-11 14:58:13
Odp: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
heheh
nie no myslaem o 50 latach. 100Mbit i tak chyba nie osiągne no chyba ze za te 50 lat.
cosik innego sensownego w tej ceniei z gorgulcem?
49 2015-01-11 14:55:38
Odp: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
chodzi o mały i tani max 100pln
, chodzi głównie o wi-fi bo za pomocą tego bedą się łączyły laptki telefony z siecia.
50 2015-01-11 14:33:57
Temat: TP LINK WR710N i Gorgulec (12 odpowiedzi, napisanych Oprogramowanie / Software)
chcialbym się zapytać zanim zakupie ten router czy po instalacji gorgulca i podpieciu HiLinka 3372 dużo przytnie router po wi-fi LTE? bedzie jakiś znaczy spadek jesli predkości są rzedu 5-27Mb/s w obie strony czyli Download-Upload
Znalezione posty: 26 do 50 z 185
eko.one.pl → Posty przez mrrowek
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc