Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez Jimmy
Zrobiliście aktualizacje z zachowaniem konfiguracji, prawda?
Wiem że pewnie to źle zrobiłem, bo aktualizacje zrobiłem z poziomu luci bez zachowania konfiguracji, a powinien to zrobić w konsoli za pomocą sysupgrade -n *.tar...
Mi Gargoyle 1.11 nie chce się łączyć z netem(modem lte e3372h) i krzyczy w ustawieniach wifi, że nie wybrałem regionu i wybrało domyślne Świat, zamiast Polska. Podłaczam i ustawiam jak zawsze modem rndis i wifi. Strony nie chcą się ładować. Wróciłem do Openwrt Luci i działa wszystko.
U mnie jest to samo, na routerze jest internet tj przez konsole pinguje np. 8.8.8.8 ale już po kablu czy wifi nie ma, nie pinguje modemu tj 192.168.8.1... adres wan routera pinguje tj 192.168.8.100. dylemat ????
Default router w telefonie zmień na ten co masz w danej lokalizacji, sprawdź routing czy w tablicy routingu masz wszystkie sieci...
@sty wyprzedziłeś mnie 
odnośnie tego /tmp # mtd_write write /tmp/firmware.bin Firmware_Stub
ja to zrobiłem tak: pod Padavan uruchomiłem ssh, firmware połączyłem Cezarego konkretnie LEDE+luci, następnie
/tmp # mtd_write write /tmp/firmware.bin Firmware_Stub
i udało się zainstalować LEDE pod padavan.
Log z podłączonym modemem hilink
Jan 1 00:00:02 syslogd started: BusyBox v1.24.2
Jan 1 00:00:03 MI-R3G: firmware version: 3.4.3.9-099_dff9a34
Jan 1 00:00:03 kernel: klogd started: BusyBox v1.24.2 (2017-11-16 11:43:52 CET)
Jan 1 00:00:03 kernel: Linux version 3.4.113 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 SMP Thu Nov 16 11:35:20 CET 2017
Jan 1 00:00:03 kernel: MediaTek SoC: MT7621A, RevID: 0103, RAM: DDR3, XTAL: 40MHz
Jan 1 00:00:03 kernel: CPU/OCP/SYS frequency: 900/225/225 MHz
Jan 1 00:00:03 kernel: CPU sleep mode: ON
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Determined physical RAM map:
Jan 1 00:00:03 kernel: memory: 10000000 @ 00000000 (usable)
Jan 1 00:00:03 kernel: Zone PFN ranges:
Jan 1 00:00:03 kernel: Normal 0x00000000 -> 0x00010000
Jan 1 00:00:03 kernel: Movable zone start PFN for each node
Jan 1 00:00:03 kernel: Early memory PFN ranges
Jan 1 00:00:03 kernel: 0: 0x00000000 -> 0x00010000
Jan 1 00:00:03 kernel: On node 0 totalpages: 65536
Jan 1 00:00:03 kernel: free_area_init_node: node 0, pgdat 803a1ee0, node_mem_map 81000000
Jan 1 00:00:03 kernel: Normal zone: 512 pages used for memmap
Jan 1 00:00:03 kernel: Normal zone: 0 pages reserved
Jan 1 00:00:03 kernel: Normal zone: 65024 pages, LIFO batch:15
Jan 1 00:00:03 kernel: Detected 3 available secondary CPU(s)
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: PERCPU: Embedded 7 pages/cpu @81203000 s5760 r8192 d14720 u32768
Jan 1 00:00:03 kernel: pcpu-alloc: s5760 r8192 d14720 u32768 alloc=8*4096
Jan 1 00:00:03 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Jan 1 00:00:03 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Jan 1 00:00:03 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
Jan 1 00:00:03 kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:03 kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:03 kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 00:00:03 kernel: Writing ErrCtl register=00005000
Jan 1 00:00:03 kernel: Readback ErrCtl register=00005000
Jan 1 00:00:03 kernel: Memory: 255676k/262144k available (3224k kernel code, 6468k reserved, 493k data, 244k init, 0k highmem)
Jan 1 00:00:03 kernel: Hierarchical RCU implementation.
Jan 1 00:00:03 kernel: NR_IRQS:72
Jan 1 00:00:03 kernel: MIPS GIC RevID: 3.0
Jan 1 00:00:03 kernel: Setting up vectored interrupts
Jan 1 00:00:03 kernel: console [ttyS0] enabled
Jan 1 00:00:03 kernel: Calibrating delay loop... 598.01 BogoMIPS (lpj=299008)
Jan 1 00:00:03 kernel: pid_max: default: 32768 minimum: 301
Jan 1 00:00:03 kernel: Mount-cache hash table entries: 512
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Synchronize counters for CPU 1: done.
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Synchronize counters for CPU 2: done.
Jan 1 00:00:03 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan 1 00:00:03 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan 1 00:00:03 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan 1 00:00:03 kernel: Synchronize counters for CPU 3: done.
Jan 1 00:00:03 kernel: Brought up 4 CPUs
Jan 1 00:00:03 kernel: NET: Registered protocol family 16
Jan 1 00:00:03 kernel: FPU Affinity set after 116 emulations
Jan 1 00:00:03 kernel: bio: create slab <bio-0> at 0
Jan 1 00:00:03 kernel: SCSI subsystem initialized
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usbfs
Jan 1 00:00:03 kernel: usbcore: registered new interface driver hub
Jan 1 00:00:03 kernel: usbcore: registered new device driver usb
Jan 1 00:00:03 kernel: PCI host bridge to bus 0000:00
Jan 1 00:00:03 kernel: pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Jan 1 00:00:03 kernel: pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
Jan 1 00:00:03 kernel: pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Jan 1 00:00:03 kernel: pci 0000:00:00.0: supports D1
Jan 1 00:00:03 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Jan 1 00:00:03 kernel: pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Jan 1 00:00:03 kernel: pci 0000:00:01.0: supports D1
Jan 1 00:00:03 kernel: pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Jan 1 00:00:03 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan 1 00:00:03 kernel: pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan 1 00:00:03 kernel: pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
Jan 1 00:00:03 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Jan 1 00:00:03 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Jan 1 00:00:03 kernel: pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
Jan 1 00:00:03 kernel: pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Jan 1 00:00:03 kernel: pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Jan 1 00:00:03 kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Jan 1 00:00:03 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Jan 1 00:00:03 kernel: pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
Jan 1 00:00:03 kernel: pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
Jan 1 00:00:03 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
Jan 1 00:00:03 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
Jan 1 00:00:03 kernel: pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
Jan 1 00:00:03 kernel: pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
Jan 1 00:00:03 kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
Jan 1 00:00:03 kernel: pci 0000:00:01.0: PCI bridge to [bus 02-02]
Jan 1 00:00:03 kernel: pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
Jan 1 00:00:03 kernel: pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref]
Jan 1 00:00:03 kernel: PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: Switching to clocksource Ralink Systick Timer
Jan 1 00:00:03 kernel: NET: Registered protocol family 2
Jan 1 00:00:03 kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 00:00:03 kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jan 1 00:00:03 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan 1 00:00:03 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jan 1 00:00:03 kernel: TCP: reno registered
Jan 1 00:00:03 kernel: UDP hash table entries: 128 (order: 0, 4096 bytes)
Jan 1 00:00:03 kernel: NET: Registered protocol family 1
Jan 1 00:00:03 kernel: PCI: CLS 32 bytes, default 32
Jan 1 00:00:03 kernel: 4 CPUs re-calibrate udelay (lpj = 296960)
Jan 1 00:00:03 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 00:00:03 kernel: msgmni has been set to 499
Jan 1 00:00:03 kernel: io scheduler noop registered (default)
Jan 1 00:00:03 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 00:00:03 kernel: serial8250: ttyS0 at MMIO 0x1e000c00 (irq = 34) is a 16550A
Jan 1 00:00:03 kernel: Ralink GPIO driver initialized. Number of GPIO: 64, GPIO mode: 000A85AC
Jan 1 00:00:03 kernel: loop: module loaded
Jan 1 00:00:03 kernel: MediaTek NAND driver init, version v2.1
Jan 1 00:00:03 kernel: MTK NFI: NAND ID [C8 D1, 80 95 40 7F]
Jan 1 00:00:03 kernel: MTK NFI: NAND chip with device ID c8d1 is not found in MTK table!
Jan 1 00:00:03 kernel: MTK NFI: try detect NAND chip from bootstrap mode (01)
Jan 1 00:00:03 kernel: NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (ESMT NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
Jan 1 00:00:03 kernel: Scanning device for bad blocks
Jan 1 00:00:03 kernel: MTK NFI: success load FACT_BBT from block 1023
Jan 1 00:00:03 kernel: Creating 9 MTD partitions on "MT7621-NAND":
Jan 1 00:00:03 kernel: 0x000000000000-0x000000080000 : "Bootloader"
Jan 1 00:00:03 kernel: 0x000000080000-0x000000100000 : "BootEnv"
Jan 1 00:00:03 kernel: 0x000000100000-0x000000600000 : "Factory"
Jan 1 00:00:03 kernel: 0x000000600000-0x000000760000 : "Kernel"
Jan 1 00:00:03 kernel: 0x000000760000-0x000001a00000 : "RootFS"
Jan 1 00:00:03 kernel: 0x000001a00000-0x000001b00000 : "Config"
Jan 1 00:00:03 kernel: 0x000001b00000-0x000001f00000 : "Storage"
Jan 1 00:00:03 kernel: 0x000001f00000-0x000007f80000 : "RWFS"
Jan 1 00:00:03 kernel: 0x000000600000-0x000001a00000 : "Firmware_Stub"
Jan 1 00:00:03 kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:03 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 00:00:03 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
Jan 1 00:00:03 kernel: raeth: PDMA RX ring 512, QDMA TX pool 1024. Max packet size 1536
Jan 1 00:00:03 kernel: raeth: NAPI & GRO support, weight 64
Jan 1 00:00:03 kernel: raeth: Byte Queue Limits (BQL) support
Jan 1 00:00:03 kernel: PPP generic driver version 2.4.2
Jan 1 00:00:03 kernel: PPP MPPE Compression module registered
Jan 1 00:00:03 kernel: NET: Registered protocol family 24
Jan 1 00:00:03 kernel: PPTP driver version 0.8.5
Jan 1 00:00:03 kernel: usbcore: registered new interface driver libusual
Jan 1 00:00:03 kernel: nf_conntrack version 0.5.0 (32768 buckets, 32768 max)
Jan 1 00:00:03 kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:03 kernel: Bridge firewalling registered
Jan 1 00:00:03 kernel: gre: GRE over IPv4 demultiplexor driver
Jan 1 00:00:03 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:03 kernel: TCP: cubic registered
Jan 1 00:00:03 kernel: NET: Registered protocol family 10
Jan 1 00:00:03 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:03 kernel: IPv6 over IPv4 tunneling driver
Jan 1 00:00:03 kernel: NET: Registered protocol family 17
Jan 1 00:00:03 kernel: L2TP core driver, V2.0
Jan 1 00:00:03 kernel: PPPoL2TP kernel driver, V2.0
Jan 1 00:00:03 kernel: 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:03 kernel: ASUS NVRAM, v0.08. Available space: 131072. Integrity: OK
Jan 1 00:00:03 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Jan 1 00:00:03 kernel: Freeing unused kernel memory: 244k freed
Jan 1 00:00:03 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 00:00:03 kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: MT76x2 AP Driver version: 3.0.5.0
Jan 1 00:00:03 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Jan 1 00:00:03 kernel: MT7603 AP Driver version: 4.1.0.0_pre
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usblp
Jan 1 00:00:03 kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usb-storage
Jan 1 00:00:03 kernel: USB Mass Storage support registered.
Jan 1 00:00:03 kernel: usbcore: registered new interface driver cdc_ether
Jan 1 00:00:03 kernel: usbcore: registered new interface driver rndis_host
Jan 1 00:00:03 kernel: usbcore: registered new interface driver cdc_wdm
Jan 1 00:00:03 kernel: usbcore: registered new interface driver qmi_wwan
Jan 1 00:00:03 kernel: usbcore: registered new interface driver cdc_ncm
Jan 1 00:00:03 kernel: usbcore: registered new interface driver huawei_cdc_ncm
Jan 1 00:00:03 kernel: usbcore: registered new interface driver cdc_mbim
Jan 1 00:00:03 kernel: usbcore: registered new interface driver sierra_net
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usbserial
Jan 1 00:00:03 kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 00:00:03 kernel: USB Serial support registered for generic
Jan 1 00:00:03 kernel: usbserial: USB Serial Driver core
Jan 1 00:00:03 kernel: usbcore: registered new interface driver qcserial
Jan 1 00:00:03 kernel: USB Serial support registered for Qualcomm USB modem
Jan 1 00:00:03 kernel: usbcore: registered new interface driver sierra
Jan 1 00:00:03 kernel: USB Serial support registered for Sierra USB modem
Jan 1 00:00:03 kernel: usbcore: registered new interface driver option
Jan 1 00:00:03 kernel: USB Serial support registered for GSM modem (1-port)
Jan 1 00:00:03 kernel: U2PHY P0 set SRCTRL calibration value: 3
Jan 1 00:00:03 kernel: U2PHY P1 set SRCTRL calibration value: 3
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: irq 30, io mem 0x1e1c0000
Jan 1 00:00:03 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 1 00:00:03 kernel: usb usb1: Product: xHCI Host Controller
Jan 1 00:00:03 kernel: usb usb1: Manufacturer: Linux 3.4.113 xhci-hcd
Jan 1 00:00:03 kernel: usb usb1: SerialNumber: xhci-hcd
Jan 1 00:00:03 kernel: xHCI xhci_add_endpoint called for root hub
Jan 1 00:00:03 kernel: xHCI xhci_check_bandwidth called for root hub
Jan 1 00:00:03 kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:03 kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
Jan 1 00:00:03 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
Jan 1 00:00:03 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
Jan 1 00:00:03 kernel: usb usb2: Product: xHCI Host Controller
Jan 1 00:00:03 kernel: usb usb2: Manufacturer: Linux 3.4.113 xhci-hcd
Jan 1 00:00:03 kernel: usb usb2: SerialNumber: xhci-hcd
Jan 1 00:00:03 kernel: xHCI xhci_add_endpoint called for root hub
Jan 1 00:00:03 kernel: xHCI xhci_check_bandwidth called for root hub
Jan 1 00:00:03 kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:03 kernel: hub 2-0:1.0: 1 port detected
Jan 1 00:00:03 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Jan 1 00:00:03 kernel: raeth: HW VLAN RX offload enabled
Jan 1 00:00:03 kernel: raeth: HW VLAN TX offload enabled
Jan 1 00:00:03 kernel: raeth: HW Scatter/Gather TX offload enabled
Jan 1 00:00:03 kernel: raeth: HW TCP segmentation offload (TSO) enabled
Jan 1 00:00:03 kernel: mtk_esw - hw bridge: W|LLLL
Jan 1 00:00:03 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
Jan 1 00:00:03 kernel: device eth2 entered promiscuous mode
Jan 1 00:00:05 kernel: =====================================================
Jan 1 00:00:05 kernel: Channel 36 : Dirty = 0, False CCA = 47, Busy Time = 0, Skip Channel = FALSE
Jan 1 00:00:05 kernel: Channel 40 : Dirty = 0, False CCA = 1313, Busy Time = 0, Skip Channel = FALSE
Jan 1 00:00:05 kernel: Channel 44 : Dirty = 0, False CCA = 47, Busy Time = 0, Skip Channel = FALSE
Jan 1 00:00:05 kernel: Channel 48 : Dirty = 0, False CCA = 54, Busy Time = 0, Skip Channel = FALSE
Jan 1 00:00:05 kernel: =====================================================
Jan 1 00:00:05 kernel: Rule 2 CCA value : Min False CCA value ==> Select Channel 40, min falsecca = 1461
Jan 1 00:00:05 kernel: device rai0 entered promiscuous mode
Jan 1 00:00:06 kernel: MT7603 Andes FW Version: ap_pcie
Jan 1 00:00:06 kernel: MT7603 Andes FW Build Date: 20160107100755
Jan 1 00:00:09 kernel: ch1 bssid=fc:94:e3:3f:55:42
Jan 1 00:00:09 kernel: ch1 bssid=fe:94:e3:3f:55:44
Jan 1 00:00:09 kernel: ch1 bssid=5c:f9:6a:58:8c:f3
Jan 1 00:00:09 kernel: ch1 bssid=e8:de:27:30:60:a3
Jan 1 00:00:09 kernel: ch4 bssid=1c:5f:2b:eb:a2:6c
Jan 1 00:00:09 kernel: ch6 bssid=b0:c2:87:82:f3:05
Jan 1 00:00:09 kernel: ch6 bssid=b2:c2:87:82:f3:07
Jan 1 00:00:09 kernel: ch9 bssid=38:f8:89:03:c6:dc
Jan 1 00:00:09 kernel: ch11 bssid=e4:6f:13:26:87:ce
Jan 1 00:00:09 kernel: ch11 bssid=64:7c:34:9f:34:c6
Jan 1 00:00:09 kernel: ch11 bssid=90:5c:44:7c:2f:cb
Jan 1 00:00:09 kernel: ch11 bssid=06:7c:34:9f:34:c6
Jan 1 00:00:09 kernel: ch11 bssid=c6:27:95:bb:fd:cf
Jan 1 00:00:09 kernel: ch11 bssid=c4:27:95:bb:fd:cd
Jan 1 00:00:09 kernel: =====================================================
Jan 1 00:00:09 kernel: Channel 1 : Dirty = 334, False CCA = 0, Busy Time = 4281, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 2 : Dirty = 196, False CCA = 0, Busy Time = 3271, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 3 : Dirty = 192, False CCA = 0, Busy Time = 3942, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 4 : Dirty = 232, False CCA = 0, Busy Time = 6217, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 5 : Dirty = 196, False CCA = 0, Busy Time = 29511, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 6 : Dirty = 212, False CCA = 0, Busy Time = 24756, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 7 : Dirty = 236, False CCA = 0, Busy Time = 13499, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 8 : Dirty = 252, False CCA = 0, Busy Time = 36117, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 9 : Dirty = 296, False CCA = 0, Busy Time = 31556, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 10 : Dirty = 264, False CCA = 0, Busy Time = 26764, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 11 : Dirty = 498, False CCA = 0, Busy Time = 12319, Skip Channel = FALSE
Jan 1 00:00:09 kernel: Channel 12 : Dirty = 216, False CCA = 0, Busy Time = 3498, Skip Channel = TRUE
Jan 1 00:00:09 kernel: Channel 13 : Dirty = 188, False CCA = 0, Busy Time = 9227, Skip Channel = TRUE
Jan 1 00:00:09 kernel: =====================================================
Jan 1 00:00:09 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 2
Jan 1 00:00:09 kernel: Min Dirty = 1224
Jan 1 00:00:09 kernel: ExChannel = 0 , 0
Jan 1 00:00:09 kernel: BW = 40
Jan 1 00:00:09 kernel: device ra0 entered promiscuous mode
Jan 1 00:00:10 kernel: br0: port 3(ra0) entered forwarding state
Jan 1 00:00:10 kernel: br0: port 2(rai0) entered forwarding state
Jan 1 00:00:10 kernel: br0: port 1(eth2) entered forwarding state
Jan 1 00:00:10 kernel: mtk_esw - software IGMP/MLD snooping: 1
Jan 1 00:00:10 dnsmasq[545]: started, version 2.78 cachesize 1536
Jan 1 00:00:10 dnsmasq[545]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan 1 00:00:10 dnsmasq-dhcp[545]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Jan 1 00:00:10 dnsmasq-dhcp[545]: DHCP, sockets bound exclusively to interface br0
Jan 1 00:00:10 dnsmasq[545]: read /etc/hosts - 3 addresses
Jan 1 00:00:10 dnsmasq[545]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan 1 00:00:10 dnsmasq-dhcp[545]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:00:10 kernel: eth3: ===> VirtualIF_open
Jan 1 00:00:10 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Jan 1 00:00:10 MI-R3G: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Jan 1 00:00:10 MI-R3G: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Jan 1 00:00:10 MI-R3G: Hardware NAT/Routing: IPv6 routes offload - OFF
Jan 1 00:00:10 DHCP WAN Client: starting on eth3 ...
Jan 1 00:00:11 httpd[574]: Server listening port 80 (HTTP).
Jan 1 00:00:11 miniupnpd[580]: version 2.0 starting UPnP-IGD ext if eth3 BOOTID=1420066811
Jan 1 00:00:11 miniupnpd[580]: HTTP listening on port 55156
Jan 1 00:00:12 kernel: br0: port 3(ra0) entered forwarding state
Jan 1 00:00:12 kernel: br0: port 2(rai0) entered forwarding state
Jan 1 00:00:12 kernel: br0: port 1(eth2) entered forwarding state
Jan 1 00:01:15 kernel: usb 1-1: new high-speed USB device number 2 using xhci-hcd
Jan 1 00:01:15 kernel: usb 1-1: New USB device found, idVendor=12d1, idProduct=1f01
Jan 1 00:01:15 kernel: usb 1-1: Product: HUAWEI Mobile
Jan 1 00:01:15 kernel: usb 1-1: Manufacturer: HUAWEI Technology
Jan 1 00:01:15 kernel: usb 1-1: SerialNumber: FFFFFFFFFFFFFFFF
Jan 1 00:01:15 kernel: scsi0 : usb-storage 1-1:1.0
Jan 1 00:01:18 kernel: scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Jan 1 00:01:18 kernel: scsi 0:0:0:0: Attached scsi generic sg0 type 5
Jan 1 00:01:18 usb_modeswitch: switch device 12d1:1f01 on 001/002
Jan 1 00:01:18 kernel: usb 1-1: USB disconnect, device number 2
Jan 1 00:01:19 kernel: usb 1-1: new high-speed USB device number 3 using xhci-hcd
Jan 1 00:01:19 kernel: usb 1-1: New USB device found, idVendor=12d1, idProduct=14db
Jan 1 00:01:19 kernel: usb 1-1: Product: HUAWEI Mobile
Jan 1 00:01:19 kernel: usb 1-1: Manufacturer: HUAWEI Technology
Jan 1 00:01:19 kernel: cdc_ether 1-1:1.0: weth0: register 'cdc_ether' at usb-xhci-hcd-1, CDC Ethernet Device, 58:2c:80:13:92:63
Jan 1 00:01:24 USB hotplug: try start USB Modem as WAN connection...
Jan 1 00:01:25 kernel: eth3: ===> VirtualIF_close
Jan 1 00:01:25 kernel: eth3: ===> VirtualIF_open
Jan 1 00:01:25 MI-R3G: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Jan 1 00:01:25 MI-R3G: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Jan 1 00:01:25 MI-R3G: Hardware NAT/Routing: IPv6 routes offload - OFF
Jan 1 00:01:25 dnsmasq[545]: read /etc/hosts - 3 addresses
Jan 1 00:01:25 dnsmasq[545]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan 1 00:01:25 dnsmasq-dhcp[545]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:01:25 dnsmasq[545]: using nameserver 8.8.8.8#53
Jan 1 00:01:25 miniupnpd[580]: shutting down MiniUPnPd
Jan 1 00:01:25 kernel: cdc_ether 1-1:1.0: weth0: kevent 12 may have been dropped
Jan 1 00:01:25 DHCP WAN Client: starting on weth0 ...
Jan 1 00:01:28 DHCP WAN Client: bound (weth0), IP: 192.168.8.100, GW: 192.168.8.1, lease time: 86400
Jan 1 00:01:28 MI-R3G: WAN up (weth0)
Jan 1 00:01:28 dnsmasq[545]: read /etc/hosts - 3 addresses
Jan 1 00:01:28 dnsmasq[545]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan 1 00:01:28 dnsmasq-dhcp[545]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 1 00:01:28 dnsmasq[545]: using nameserver 192.168.8.1#53
Jan 1 00:01:28 miniupnpd[719]: version 2.0 starting UPnP-IGD ext if weth0 BOOTID=1420066888
Jan 1 00:01:28 miniupnpd[719]: HTTP listening on port 3342
Jan 1 00:01:29 dnsmasq[545]: nameserver 192.168.8.1 refused to do a recursive query
Jan 1 00:01:31 dnsmasq[545]: nameserver 192.168.8.1 refused to do a recursive query
Jan 1 00:01:36 NTP Client: Synchronizing time to pool.ntp.org.
Jan 1 00:02:01 NTP Client: Synchronizing time to time.nist.gov.
Nov 20 19:33:53 NTP Client: System time changed, offset: 91135911.336052sPo połączeniu tych plików
cp lede-ramips-mt7621-mir3g-initramfs-kernel.bin firmware.bin && truncate --size 4194304 firmware.bin && cat lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin >> firmware.bini firmware Cezarego a konkretnie luci, następnie wgranie go pod breed, następnie router cały czas się resetuje...
W padavan po podłączeniu modemu mogę zestawić połączenie poprzez ndis, i mogę później wejść na stronę modemu 192.168.8.1, więc jaki to jest modem... Hilink czy nie...
Ja mam modem huawei e3276 hilink i zestawiam połączenie przez NDIS bo tylko takie mam (tylko takie jest do LTE). Chodzi to połączenie bez problemu, ale szkoda że niema hilink.
poradziłem sobie, jeśli ktoś chce z breeda wrzucać lede to trzeba przygotować firmware :
cp lede-ramips-mt7621-mir3g-initramfs-kernel.bin firmware.bin && truncate --size 4194304 firmware.bin && cat lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin >> firmware.bin
Tylko gdzie w breede to zrobić??
Fajny ten padavan, ale on chyba nie obsluguje modemow hilink, chyba ze sie myle. Z poziomu padavana lub breeda da sie wgrac lede? Czy poprostu musze OFW wgrac aby lede zainstalowac.
Mógłby ktoś udostępnić soft padavan do tego routera? Bo podczas kompilacji nie wiem co mam zaznaczać...
Z oryginalnego.
To szkoda... A jest możliwość z poziomu lede korzystać z tych komend:
mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
nvram set flag_try_sys1_failed=1
nvram commit
reboot
https://forum.lede-project.org/t/xiaomi … er-3g/5377
tylko zamiast tych plików lede mieć już skompilowany padavan? Tak jak jest w tym filmie
https://m.youtube.com/watch?v=z11cNlA8OdI
padavan-a mogę wgrać z poziomu lede (sysupgrade)? Czy tylko z orginalnego softu?
Ma ktoś może firmware padvan do routera taki jak w temacie? Będzie na nim działał modem hilink? Mam zainstalowane lede, padvana mogę zainstalować przez sysupgrade?
Dzięki działa
Aby wgrać LEDE korzystać z tego poradnika ?
https://forum.lede-project.org/t/xiaomi … er-3g/5377
Czy macie może inny poradnik ?
Musiałem zmienić firmware i webgui, wgrałem taki sam jak kolega @mar_w i wszystko ładnie chodzi . Ale mam jeszcze pytanie co polecacie do modemu e3372 aby kody ussd działały?
dokładnie mam wymuszony tryb 4g, po południu sprawdzę, ale na 100% przez to mi nie działa, dziękuję za pomoc
Komuś się udało wysyłać kody USSD gdy modem jest hilink? Bo mam zmieniony soft taki jak w pierwszym poscie ale strona z kodami ussd chodzi ale wysyłać kodów się już nie da... Da się coś z tym zrobić, aby było można wysyłać kody ussd w trybie hilink?
Ja się zastanawiałem czy się gołe lede z obsługą modemu hilink Huawei zmieści się na router z 4 MB flash... Tylko na tym mi zależy sama konsola i obsługa modemu. Co o tym myślicie?
Podmieniłem kartę wifi na inną i działa bez problemu. Nie ma blokady regionalnej.
Dzięki za podpowiedz
Wpisywałem iw reg set PL i nie wyświetlają się kanały.
Podejrzewam że karta tego nie wspiera...
Mam problem o odblokowaniem kanału 13 na karcie wifi, domyślnie są odblokowane kanały od 1 do 12.
0c:00.0 Unclassified device [0033]: Qualcomm Atheros AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) (rev 8c)iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Device supports AP-side u-APSD.
Device supports T-DLS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
* 00-0f-ac:10
* GCMP (00-0f-ac:8)
* 00-0f-ac:9
Available Antennas: TX 0x3 RX 0x7
Configured Antennas: TX 0x3 RX 0x7
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
* P2P-client
* P2P-GO
* Unknown mode (11)
Band 1:
Capabilities: 0x104e
HT20/HT40
SM Power Save disabled
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (17.0 dBm)
* 2417 MHz [2] (17.0 dBm)
* 2422 MHz [3] (17.0 dBm)
* 2427 MHz [4] (17.0 dBm)
* 2432 MHz [5] (17.0 dBm)
* 2437 MHz [6] (17.0 dBm)
* 2442 MHz [7] (17.0 dBm)
* 2447 MHz [8] (17.0 dBm)
* 2452 MHz [9] (17.0 dBm)
* 2457 MHz [10] (17.0 dBm)
* 2462 MHz [11] (17.0 dBm)
* 2467 MHz [12] (17.0 dBm)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x104e
HT20/HT40
SM Power Save disabled
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (13.0 dBm) (no IR)
* 5200 MHz [40] (17.0 dBm) (no IR)
* 5220 MHz [44] (17.0 dBm) (no IR)
* 5240 MHz [48] (17.0 dBm) (no IR)
* 5260 MHz [52] (17.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5280 MHz [56] (17.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5300 MHz [60] (17.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5320 MHz [64] (17.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
DFS state: usable (for 295 sec)
DFS CAC time: 60000 ms
* 5745 MHz [149] (disabled)
* 5765 MHz [153] (disabled)
* 5785 MHz [157] (disabled)
* 5805 MHz [161] (disabled)
* 5825 MHz [165] (disabled)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* tdls_mgmt
* tdls_oper
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* channel_switch
* Unknown command (104)
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
* #{ WDS } <= 2048,
total <= 2048, #channels <= 1, STA/AP BI must match
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
P2P GO supports CT window setting
Driver supports a userspace MPM
Device supports active monitor (which will ACK incoming frames)
Driver/device bandwidth changes during BSS lifetime (AP/GO mode)Linux Mint 18 Cinnamon 32-bit
Linux local 4.4.0-36-generic #55-Ubuntu SMP Thu Aug 11 18:00:59 UTC 2016 i686 i686 i686 GNU/LinuxJeśli ktoś wie jak to odblokować to będę wdzięczny
Mi chodzi o to gdy modem hilink jest trybie lte to aby wyswietlał bts. Wgetnossl mam zainstalowane.
Bo signal korzysta w gcomu (czyli wymaga interfejsu szeregowego) do odczytu. Z hlinkiem nie działa. I tak samo nie działa z hilinkiem gnokii i ussd.
A czy jest wogóle możliwe aby zmusić 3ginfo do pracy z hilink lte aby poprawnie wyświetlało wartości np. bts?
@qbicone Teraz jest za 121.45zł...
eko.one.pl → Posty przez Jimmy
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc