Reset do ustawień fabrycznych poskutkował.

Poprawiłem już.

Wynik iw/dev

phy#1
        Interface wlan1
                ifindex 24
                wdev 0x100000008
                addr 74:da:88:c7:75:f6
                ssid ArcherC6
                type AP
                channel 7 (2442 MHz), width: 40 MHz, center1: 2432 MHz
                txpower 20.00 dBm
                multicast TXQ:
                        qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol tx-bytes        tx-packets
                        0       0       0       0       0       0       0       0               0
phy#0
        Interface wlan0
                ifindex 11
                wdev 0x2
                addr 74:da:88:c7:75:f5
                ssid ArcherC6_5G
                type AP
                channel 36 (5180 MHz), width: 80 MHz, center1: 5210 MHz
                txpower 23.00 dBm
                multicast TXQ:
                        qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol tx-bytes        tx-packets
                        0       0       9452    0       0       0       0       1287831         9452

Mam taki wynik

43 5 * * * /sbin/stat.sh
echo '* * * * * /usr/bin/wireguard_watchdog' >> /etc/crontabs/root
59 23 * * 7 /etc/init.d/adblock start

Proszę log

root@ArcherC6v2:~# logread
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.000000] Linux version 4.14.202 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 Wed Oct 21 13:34:11 2020
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] MIPS: machine is TP-Link Archer C6 v2
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Determined physical RAM map:
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Fri Oct 30 18:24:22 2020 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Fri Oct 30 18:24:22 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Zone ranges:
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Early memory node ranges
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804fbf70, node_mem_map 81008000
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x804ff740 with crng_init=0
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] Memory: 123300K/131072K available (4034K kernel code, 157K rwdata, 532K rodata, 1220K init, 212K bss, 7772K reserved, 0K cma-reserved)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] NR_IRQS: 51
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] CPU clock: 775.000 MHz
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.008228] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.074771] pid_max: default: 32768 minimum: 301
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.079794] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.086777] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.097662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.108062] futex hash table entries: 256 (order: -1, 3072 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.114554] pinctrl core: initialized pinctrl subsystem
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.122123] NET: Registered protocol family 16
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.129550] PCI host bridge /ahb/pcie-controller@18250000 ranges:
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.136029]  MEM 0x0000000012000000..0x0000000013ffffff
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.141526]   IO 0x0000000000000000..0x0000000000000000
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.161097] PCI host bridge to bus 0000:00
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.165421] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.172706] pci_bus 0000:00: root bus resource [io  0x0000]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.178576] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.185737] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.194112] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.194167] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.194288] pci 0000:00:00.0: PME# supported from D0 D3hot
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.194460] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.194481] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.204769] clocksource: Switched to clocksource MIPS
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.210970] NET: Registered protocol family 2
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.216353] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.223702] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.230453] TCP: Hash tables configured (established 1024 bind 1024)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.237284] UDP hash table entries: 256 (order: 0, 4096 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.243452] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.250322] NET: Registered protocol family 1
Fri Oct 30 18:24:22 2020 kern.debug kernel: [    0.254986] PCI: CLS 0 bytes, default 32
Fri Oct 30 18:24:22 2020 kern.warn kernel: [    0.257500] Crashlog allocated RAM at address 0x3f00000
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.264134] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.275172] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.281316] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.299939] io scheduler noop registered
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.304071] io scheduler deadline registered (default)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.311189] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.319469] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.328233] console [ttyS0] disabled
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.332035] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.341168] console [ttyS0] enabled
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.348733] bootconsole [early0] disabled
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.373976] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.379015] 5 fixed-partitions partitions found on MTD device spi0.0
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.385584] Creating 5 MTD partitions on "spi0.0":
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.390542] 0x000000000000-0x000000020000 : "u-boot"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.396362] 0x000000020000-0x000000030000 : "mac"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.401828] 0x000000030000-0x0000007d0000 : "firmware"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.409571] 2 uimage-fw partitions found on MTD device firmware
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.415736] Creating 2 MTD partitions on "firmware":
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.420870] 0x000000000000-0x000000186320 : "kernel"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.426657] 0x000000186320-0x0000007a0000 : "rootfs"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.432349] mtd: device 4 (rootfs) set to be root filesystem
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.438284] 1 squashfs-split partitions found on MTD device rootfs
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.444671] 0x000000620000-0x0000007a0000 : "rootfs_data"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.450901] 0x0000007d0000-0x0000007f0000 : "tplink"
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    0.456708] 0x0000007f0000-0x000000800000 : "art"
Fri Oct 30 18:24:22 2020 kern.info kernel: [    0.463142] libphy: Fixed MDIO Bus: probed
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.145131] libphy: ag71xx_mdio: probed
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.152084] switch0: Atheros AR8337 rev. 2 switch registered on mdio-bus.0
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.806239] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.817839] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.826524] NET: Registered protocol family 10
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.835960] Segment Routing with IPv6
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.839827] NET: Registered protocol family 17
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.844452] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.857874] 8021q: 802.1Q VLAN Support v1.8
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.863589] hctosys: unable to open rtc device (rtc0)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.874224] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Fri Oct 30 18:24:22 2020 kern.info kernel: [    1.888338] Freeing unused kernel memory: 1220K
Fri Oct 30 18:24:22 2020 kern.warn kernel: [    1.893017] This architecture does not have kernel memory protection.
Fri Oct 30 18:24:22 2020 user.info kernel: [    2.560769] init: Console is alive
Fri Oct 30 18:24:22 2020 user.info kernel: [    2.564478] init: - watchdog -
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    2.574807] random: fast init done
Fri Oct 30 18:24:22 2020 user.info kernel: [    3.835343] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Oct 30 18:24:22 2020 user.info kernel: [    3.878896] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Oct 30 18:24:22 2020 user.info kernel: [    3.896899] init: - preinit -
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    5.010751] random: jshn: uninitialized urandom read (4 bytes read)
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    5.184404] random: jshn: uninitialized urandom read (4 bytes read)
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    5.362288] random: jshn: uninitialized urandom read (4 bytes read)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    6.766164] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Oct 30 18:24:22 2020 kern.info kernel: [    6.772249] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Fri Oct 30 18:24:22 2020 kern.warn kernel: [    6.819917] urandom_read: 4 callbacks suppressed
Fri Oct 30 18:24:22 2020 kern.notice kernel: [    6.819925] random: procd: uninitialized urandom read (4 bytes read)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    7.796097] eth0: link up (1000Mbps/Full duplex)
Fri Oct 30 18:24:22 2020 kern.info kernel: [    7.800955] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Oct 30 18:24:22 2020 kern.info kernel: [    7.807766] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Fri Oct 30 18:24:22 2020 kern.notice kernel: [   10.058046] jffs2: notice: (459) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (2 unchecked, 3 orphan) and 27 of xref (3 dead, 0 orphan) found.
Fri Oct 30 18:24:22 2020 user.info kernel: [   10.075870] mount_root: switching to jffs2 overlay
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   10.114082] overlayfs: upper fs does not support tmpfile.
Fri Oct 30 18:24:22 2020 user.warn kernel: [   10.125993] urandom-seed: Seeding with /etc/urandom.seed
Fri Oct 30 18:24:22 2020 kern.info kernel: [   10.223502] eth0: link down
Fri Oct 30 18:24:22 2020 user.info kernel: [   10.242212] procd: - early -
Fri Oct 30 18:24:22 2020 user.info kernel: [   10.246084] procd: - watchdog -
Fri Oct 30 18:24:22 2020 user.info kernel: [   10.872427] procd: - watchdog -
Fri Oct 30 18:24:22 2020 user.info kernel: [   10.880899] procd: - ubus -
Fri Oct 30 18:24:22 2020 kern.notice kernel: [   10.942509] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Oct 30 18:24:22 2020 kern.notice kernel: [   10.950590] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Oct 30 18:24:22 2020 user.info kernel: [   10.958499] procd: - init -
Fri Oct 30 18:24:22 2020 user.info kernel: [   11.662226] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.686907] tun: Universal TUN/TAP device driver, 1.6
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.712375] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.738359] Netfilter messages via NETLINK v0.30.
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.745466] ip_set: protocol 6
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.809819] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.817785] Backport generated by backports.git v4.19.137-1-0-g60c3a249
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.848562] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Oct 30 18:24:22 2020 kern.info kernel: [   11.873412] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Fri Oct 30 18:24:22 2020 user.info kernel: [   11.981004] urngd: v1.0.2 started.
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.092263] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.101032] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.167999] xt_time: kernel timezone is -0000
Fri Oct 30 18:24:22 2020 kern.notice kernel: [   12.298623] random: crng init done
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.327422] PPP generic driver version 2.4.2
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.345859] NET: Registered protocol family 24
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.407813] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x56.
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   12.425721] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Fri Oct 30 18:24:22 2020 kern.info kernel: [   12.431877] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   12.655194] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   12.666106] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Oct 30 18:24:22 2020 kern.err kernel: [   13.059786] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   13.072184] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/ct-firmware-5.bin failed with error -2
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   13.083552] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Oct 30 18:24:22 2020 kern.err kernel: [   13.455530] firmware ath10k!QCA9888!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   13.470241] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/ct-firmware-2.bin failed with error -2
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   13.481604] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Oct 30 18:24:22 2020 kern.err kernel: [   13.730150] firmware ath10k!QCA9888!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   13.739974] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/firmware-6.bin failed with error -2
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   13.751064] ath10k_pci 0000:00:00.0: Falling back to user helper
Fri Oct 30 18:24:22 2020 kern.err kernel: [   13.926346] firmware ath10k!QCA9888!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Fri Oct 30 18:24:22 2020 kern.info kernel: [   14.518456] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
Fri Oct 30 18:24:22 2020 kern.info kernel: [   14.528025] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Fri Oct 30 18:24:22 2020 kern.info kernel: [   14.548049] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-13-8c5b2baa2 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 cbf49903
Fri Oct 30 18:24:22 2020 kern.err kernel: [   14.883040] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=20 from ath10k/QCA9888/hw2.0/board-2.bin
Fri Oct 30 18:24:22 2020 kern.info kernel: [   14.897124] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id 0:20 crc32 cd8d3504
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   16.949126] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Fri Oct 30 18:24:22 2020 kern.warn kernel: [   16.956902] ath10k_pci 0000:00:00.0: msdu-desc: 2500  skid: 32
Fri Oct 30 18:24:22 2020 kern.info kernel: [   16.987022] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Fri Oct 30 18:24:22 2020 kern.info kernel: [   16.998409] ath10k_pci 0000:00:00.0: wmi print 'free: 114572 iram: 12804 sram: 29508'
Fri Oct 30 18:24:22 2020 kern.info kernel: [   17.207560] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.317595] ath: EEPROM regdomain: 0x0
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.317602] ath: EEPROM indicates default country code should be used
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.317605] ath: doing EEPROM country->regdmn map search
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.317617] ath: country maps to regdmn code: 0x3a
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.317622] ath: Country alpha2 being used: US
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.317625] ath: Regpair used: 0x3a
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.400161] ath: EEPROM regdomain: 0x0
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.400169] ath: EEPROM indicates default country code should be used
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.400172] ath: doing EEPROM country->regdmn map search
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.400185] ath: country maps to regdmn code: 0x3a
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.400190] ath: Country alpha2 being used: US
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.400192] ath: Regpair used: 0x3a
Fri Oct 30 18:24:22 2020 kern.debug kernel: [   17.412940] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Fri Oct 30 18:24:22 2020 kern.info kernel: [   17.414480] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
Fri Oct 30 18:24:22 2020 user.info kernel: [   17.501465] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Oct 30 18:24:23 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Oct 30 18:24:23 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Oct 30 18:24:23 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: started, version 2.80 cachesize 150
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: DNS service limited to local subnets
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain test
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain onion
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain localhost
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain local
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain invalid
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain bind
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: using local addresses only for domain lan
Fri Oct 30 18:24:24 2020 daemon.warn dnsmasq[1023]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: read /etc/hosts - 4 addresses
Fri Oct 30 18:24:24 2020 daemon.info dnsmasq[1023]: read /tmp/hosts/dhcp.cfg01411c - 3 addresses
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: 8021ad
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: 8021q
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: macvlan
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: veth
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: bridge
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: Network device
Fri Oct 30 18:24:26 2020 user.notice : Added device handler type: tunnel
Fri Oct 30 18:24:28 2020 cron.info crond[1255]: crond (busybox 1.30.1) started, log level 5
Fri Oct 30 18:24:28 2020 cron.err crond[1255]: user root: parse error at echo
Fri Oct 30 18:24:28 2020 cron.err crond[1255]: user root: parse error at '*
Fri Oct 30 18:24:28 2020 cron.err crond[1255]: user root: parse error at 7
Fri Oct 30 18:24:28 2020 daemon.info dnsmasq[1023]: exiting on receipt of SIGTERM
Fri Oct 30 18:24:29 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Oct 30 18:24:29 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Oct 30 18:24:29 2020 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Fri Oct 30 18:24:30 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Fri Oct 30 18:24:30 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Fri Oct 30 18:24:30 2020 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Fri Oct 30 18:24:31 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Fri Oct 30 18:24:31 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Fri Oct 30 18:24:31 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Fri Oct 30 18:24:31 2020 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Fri Oct 30 18:24:32 2020 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Fri Oct 30 18:24:32 2020 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Fri Oct 30 18:24:32 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Fri Oct 30 18:24:32 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Fri Oct 30 18:24:33 2020 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.614381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.621883] eth0: link up (1000Mbps/Full duplex)
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.644974] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.666480] br-lan: port 1(eth0.1) entered blocking state
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.672065] br-lan: port 1(eth0.1) entered disabled state
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.678066] device eth0.1 entered promiscuous mode
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.683021] device eth0 entered promiscuous mode
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.769696] br-lan: port 1(eth0.1) entered blocking state
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.775334] br-lan: port 1(eth0.1) entered forwarding state
Fri Oct 30 18:24:33 2020 kern.info kernel: [   30.781273] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'lan' is enabled
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'lan' is setting up now
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'lan' is now up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'loopback' is enabled
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'loopback' is now up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'wan' is enabled
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'wg0' is setting up now
Fri Oct 30 18:24:33 2020 daemon.notice netifd: bridge 'br-lan' link is up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Network device 'eth0' link is up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Network device 'lo' link is up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Oct 30 18:24:33 2020 daemon.notice netifd: VLAN 'eth0.2' link is up
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Fri Oct 30 18:24:33 2020 daemon.notice netifd: Interface 'wan' is setting up now
Fri Oct 30 18:24:34 2020 kern.info kernel: [   31.635119] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Oct 30 18:24:34 2020 daemon.notice netifd: wan (1595): udhcpc: started, v1.30.1
Fri Oct 30 18:24:35 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Oct 30 18:24:35 2020 daemon.notice netifd: wan (1595): udhcpc: sending discover
Fri Oct 30 18:24:35 2020 daemon.notice netifd: wan (1595): udhcpc: sending select for 89.239.82.188
Fri Oct 30 18:24:35 2020 daemon.notice netifd: wan (1595): udhcpc: lease of 89.239.82.188 obtained, lease time 3600
Fri Oct 30 18:24:36 2020 user.notice vpnbypass [1555]: service monitoring interfaces:
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.474476] ath: EEPROM regdomain: 0x8268
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.478670] ath: EEPROM indicates we should expect a country code
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.484974] ath: doing EEPROM country->regdmn map search
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.490458] ath: country maps to regdmn code: 0x37
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.495422] ath: Country alpha2 being used: PL
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.500007] ath: Regpair used: 0x37
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.503610] ath: regdomain 0x8268 dynamically updated by user
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.509634] ath: EEPROM regdomain: 0x8268
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.513768] ath: EEPROM indicates we should expect a country code
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.520075] ath: doing EEPROM country->regdmn map search
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.525574] ath: country maps to regdmn code: 0x37
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.530516] ath: Country alpha2 being used: PL
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.535121] ath: Regpair used: 0x37
Fri Oct 30 18:24:36 2020 kern.debug kernel: [   33.538723] ath: regdomain 0x8268 dynamically updated by user
Fri Oct 30 18:24:36 2020 daemon.notice netifd: Interface 'wan' is now up
Fri Oct 30 18:24:36 2020 daemon.notice netifd: Interface 'wg0' is now down
Fri Oct 30 18:24:36 2020 daemon.notice netifd: Interface 'wg0' is setting up now
Fri Oct 30 18:24:36 2020 daemon.notice netifd: radio0 (1516): command failed: Not supported (-122)
Fri Oct 30 18:24:36 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Fri Oct 30 18:24:37 2020 authpriv.info dropbear[1815]: Not backgrounding
Fri Oct 30 18:24:37 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN
Fri Oct 30 18:24:37 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN
Fri Oct 30 18:24:37 2020 daemon.notice netifd: radio1 (1517): sh: acs_survey: out of range
Fri Oct 30 18:24:38 2020 daemon.notice netifd: radio1 (1517): sh: acs_survey: out of range
Fri Oct 30 18:24:38 2020 daemon.notice netifd: Interface 'wg0' is now up
Fri Oct 30 18:24:38 2020 daemon.notice netifd: Network device 'wg0' link is up
Fri Oct 30 18:24:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Oct 30 18:24:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Fri Oct 30 18:24:40 2020 daemon.info procd: - init complete -
Fri Oct 30 18:24:41 2020 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Fri Oct 30 18:24:42 2020 kern.warn kernel: [   39.551298] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Fri Oct 30 18:24:42 2020 kern.warn kernel: [   39.559105] ath10k_pci 0000:00:00.0: msdu-desc: 2500  skid: 32
Fri Oct 30 18:24:42 2020 kern.info kernel: [   39.589444] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Fri Oct 30 18:24:42 2020 kern.info kernel: [   39.600830] ath10k_pci 0000:00:00.0: wmi print 'free: 114572 iram: 12804 sram: 29508'
Fri Oct 30 18:24:42 2020 kern.warn kernel: [   39.888678] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Fri Oct 30 18:24:42 2020 kern.info kernel: [   39.900248] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Oct 30 18:24:42 2020 kern.info kernel: [   39.923362] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: started, version 2.80 cachesize 150
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: DNS service limited to local subnets
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq-dhcp[2115]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain test
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain onion
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain localhost
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain local
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain invalid
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain bind
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain lan
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: reading /tmp/resolv.conf.auto
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain test
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain onion
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain localhost
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain local
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain invalid
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain bind
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using local addresses only for domain lan
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using nameserver 192.168.2.118#53
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using nameserver 1.1.1.1#53
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using nameserver 8.8.8.8#53
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: using nameserver 8.8.4.4#53
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: read /etc/hosts - 4 addresses
Fri Oct 30 18:24:42 2020 daemon.info dnsmasq[2115]: read /tmp/hosts/dhcp.cfg01411c - 4 addresses
Fri Oct 30 18:24:42 2020 kern.info kernel: [   40.023930] br-lan: port 2(wlan0) entered blocking state
Fri Oct 30 18:24:42 2020 kern.info kernel: [   40.029485] br-lan: port 2(wlan0) entered disabled state
Fri Oct 30 18:24:42 2020 kern.info kernel: [   40.035268] device wlan0 entered promiscuous mode
Fri Oct 30 18:24:42 2020 kern.info kernel: [   40.052553] br-lan: port 3(wlan1) entered blocking state
Fri Oct 30 18:24:42 2020 kern.info kernel: [   40.058120] br-lan: port 3(wlan1) entered disabled state
Fri Oct 30 18:24:42 2020 kern.info kernel: [   40.063876] device wlan1 entered promiscuous mode
Fri Oct 30 18:24:42 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Oct 30 18:24:42 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Fri Oct 30 18:24:42 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Oct 30 18:24:42 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Fri Oct 30 18:24:42 2020 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Fri Oct 30 18:24:42 2020 daemon.notice hostapd: wlan1: ACS-STARTED
Fri Oct 30 18:24:43 2020 daemon.info dnsmasq-dhcp[2115]: read /etc/ethers - 0 addresses
Fri Oct 30 18:24:43 2020 daemon.info dnsmasq-dhcp[2115]: DHCPDISCOVER(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c
Fri Oct 30 18:24:43 2020 daemon.info dnsmasq-dhcp[2115]: DHCPOFFER(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c
Fri Oct 30 18:24:43 2020 daemon.info dnsmasq-dhcp[2115]: DHCPREQUEST(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c
Fri Oct 30 18:24:43 2020 daemon.info dnsmasq-dhcp[2115]: DHCPACK(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c malinka
Fri Oct 30 18:24:43 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 74:da:88:c7:75:f5 and ssid "ArcherC6_5G"
Fri Oct 30 18:24:43 2020 kern.info kernel: [   40.549592] ath10k_pci 0000:00:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
Fri Oct 30 18:24:43 2020 user.notice firewall: Reloading firewall due to ifup of wg0 (wg0)
Fri Oct 30 18:24:44 2020 daemon.notice hostapd: handle_probe_req: send failed
Fri Oct 30 18:24:44 2020 daemon.notice hostapd: handle_probe_req: send failed
Fri Oct 30 18:24:44 2020 user.notice ddns-scripts[2221]: myddns_ipv4: PID '2221' started at 2020-10-30 18:24
Fri Oct 30 18:24:44 2020 kern.info kernel: [   41.755036] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Oct 30 18:24:44 2020 kern.info kernel: [   41.761836] br-lan: port 2(wlan0) entered blocking state
Fri Oct 30 18:24:44 2020 kern.info kernel: [   41.767385] br-lan: port 2(wlan0) entered forwarding state
Fri Oct 30 18:24:44 2020 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Fri Oct 30 18:24:44 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Fri Oct 30 18:24:44 2020 daemon.notice netifd: Network device 'wlan0' link is up
Fri Oct 30 18:24:45 2020 user.warn ddns-scripts[2221]: myddns_ipv4: Service section disabled! - TERMINATE
Fri Oct 30 18:24:45 2020 user.warn ddns-scripts[2221]: myddns_ipv4: PID '2221' exit WITH ERROR '1' at 2020-10-30 18:24
Fri Oct 30 18:24:45 2020 user.info adblock-4.0.7[1155]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Fri Oct 30 18:24:50 2020 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2437 channel=6
Fri Oct 30 18:24:50 2020 daemon.notice hostapd: wlan1: interface state ACS->HT_SCAN
Fri Oct 30 18:24:51 2020 daemon.info dnsmasq-dhcp[2115]: DHCPDISCOVER(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c
Fri Oct 30 18:24:51 2020 daemon.info dnsmasq-dhcp[2115]: DHCPOFFER(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c
Fri Oct 30 18:24:51 2020 daemon.info dnsmasq-dhcp[2115]: DHCPREQUEST(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c
Fri Oct 30 18:24:51 2020 daemon.info dnsmasq-dhcp[2115]: DHCPACK(br-lan) 192.168.2.118 dc:a6:32:ba:a1:0c malinka
Fri Oct 30 18:24:51 2020 daemon.notice hostapd: handle_probe_req: send failed
Fri Oct 30 18:24:52 2020 daemon.notice hostapd: handle_probe_req: send failed
Fri Oct 30 18:24:52 2020 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=6 sec=10 based on overlapping BSSes
Fri Oct 30 18:24:52 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 74:da:88:c7:75:f6 and ssid "ArcherC6"
Fri Oct 30 18:24:52 2020 kern.info kernel: [   49.995597] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Fri Oct 30 18:24:52 2020 kern.info kernel: [   50.002404] br-lan: port 3(wlan1) entered blocking state
Fri Oct 30 18:24:52 2020 kern.info kernel: [   50.007950] br-lan: port 3(wlan1) entered forwarding state
Fri Oct 30 18:24:52 2020 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Fri Oct 30 18:24:52 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Fri Oct 30 18:24:52 2020 daemon.notice netifd: Network device 'wlan1' link is up
Fri Oct 30 18:25:00 2020 cron.err crond[1255]: user root: parse error at echo
Fri Oct 30 18:25:00 2020 cron.err crond[1255]: user root: parse error at '*
Fri Oct 30 18:25:00 2020 cron.err crond[1255]: user root: parse error at 7
Fri Oct 30 18:25:05 2020 daemon.info hostapd: wlan0: STA a4:9b:4f:88:c1:4b IEEE 802.11: authenticated
Fri Oct 30 18:25:05 2020 daemon.info hostapd: wlan0: STA a4:9b:4f:88:c1:4b IEEE 802.11: associated (aid 1)
Fri Oct 30 18:25:05 2020 daemon.notice hostapd: wlan0: AP-STA-CONNECTED a4:9b:4f:88:c1:4b
Fri Oct 30 18:25:05 2020 daemon.info hostapd: wlan0: STA a4:9b:4f:88:c1:4b WPA: pairwise key handshake completed (RSN)
Fri Oct 30 18:25:05 2020 daemon.info dnsmasq-dhcp[2115]: DHCPREQUEST(br-lan) 192.168.2.112 a4:9b:4f:88:c1:4b
Fri Oct 30 18:25:05 2020 daemon.info dnsmasq-dhcp[2115]: DHCPACK(br-lan) 192.168.2.112 a4:9b:4f:88:c1:4b HUAWEI_Mate_20_lite-49d9e
Fri Oct 30 18:25:05 2020 daemon.info dnsmasq-dhcp[2115]: DHCPREQUEST(br-lan) 192.168.2.112 a4:9b:4f:88:c1:4b
Fri Oct 30 18:25:05 2020 daemon.info dnsmasq-dhcp[2115]: DHCPACK(br-lan) 192.168.2.112 a4:9b:4f:88:c1:4b HUAWEI_Mate_20_lite-49d9e
Fri Oct 30 18:25:12 2020 daemon.info hostapd: wlan0: STA 9c:da:3e:02:a5:b7 IEEE 802.11: authenticated
Fri Oct 30 18:25:12 2020 daemon.info hostapd: wlan0: STA 9c:da:3e:02:a5:b7 IEEE 802.11: associated (aid 2)
Fri Oct 30 18:25:12 2020 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 9c:da:3e:02:a5:b7
Fri Oct 30 18:25:12 2020 daemon.info hostapd: wlan0: STA 9c:da:3e:02:a5:b7 WPA: pairwise key handshake completed (WPA)
Fri Oct 30 18:25:12 2020 daemon.info hostapd: wlan0: STA 9c:da:3e:02:a5:b7 WPA: group key handshake completed (WPA)
Fri Oct 30 18:25:12 2020 daemon.info dnsmasq-dhcp[2115]: DHCPREQUEST(br-lan) 192.168.2.116 9c:da:3e:02:a5:b7
Fri Oct 30 18:25:12 2020 daemon.info dnsmasq-dhcp[2115]: DHCPACK(br-lan) 192.168.2.116 9c:da:3e:02:a5:b7 Asus-Laptop
Fri Oct 30 18:25:16 2020 authpriv.info dropbear[2435]: Child connection from 192.168.2.116:57701
Fri Oct 30 18:25:17 2020 authpriv.notice dropbear[2435]: Password auth succeeded for 'root' from 192.168.2.116:57701
Fri Oct 30 18:26:26 2020 kern.info kernel: [  143.552885] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Fri Oct 30 18:26:49 2020 authpriv.info dropbear[2545]: Child connection from 192.168.2.116:57723
Fri Oct 30 18:26:57 2020 authpriv.notice dropbear[2545]: Password auth succeeded for 'root' from 192.168.2.116:57723

Bardzo proszę

config wifi-device 'radio0'
    option type 'mac80211'
    option path 'pci0000:00/0000:00:00.0'
    option country 'PL'
    option hwmode '11a'
    option htmode 'VHT80'
    option channel '36'

config wifi-device 'radio1'
    option type 'mac80211'
    option hwmode '11g'
    option path 'platform/ahb/18100000.wmac'
    option country 'PL'
    option htmode 'HT40'
    option channel 'auto'

config wifi-iface 'wifinet1'
    option ssid 'ArcherC6_5G'
    option device 'radio0'
    option mode 'ap'
    option network 'lan'
    option key '51297572'
    option encryption 'psk-mixed'

config wifi-iface 'wifinet2'
    option ssid 'ArcherC6'
    option encryption 'psk'
    option device 'radio1'
    option mode 'ap'
    option network 'lan'
    option key '51297572'

Udało się rozwiązać problem. W strefie wg0 -> lan/wan, zaznaczyłem "Dostosuj MSS" i zaczęło działać.

"Pod latarnią najciemniej" , korzystałem z tego poradnika ale ominąłem dział Firewall bo wydał mi się nie potrzebny.

Dzięki Cezary.

Nie rozumiem o który port chodzi w tym zdaniu:
''Zmieniamy konfigurację firewalla - otwieramy port na wanie (w tym przykładzie: 55055, musi być taki sam jak w konfiguracji WireGuard)''

Chodzi o ten port który teraz jest otwarty w statusie Wireguard czy o ten port z konfiguracji serwera 51820 w moim przypadku?

Potwierdzę, trzeba switch a później idzie bez problemu

Witam Cezary, udało mi się zainstalować OpenWtr na Archer C6v2 z najnowszym softem od Tp_linka, załadowany przez TFTP tylko że pomiędzy Archer C6v2 a PC musi być dodatkowy switch lub ruter, wtedy zasysa bez problemu. Jakbyś mógł to dodać te info przy obrazach dla tego rutera to byłoły ważne info dla potomnych.

Widzę że pojawiła się aktualizacja repozytoriów, kiedy aktualizacja twoich obrazów?

Z tej strony pobieralem, a nie probowalem wgrać obrazu sysuprgade, spróbować?