Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → 12.09.01
Strony Poprzednia 1 2 3 4 5 6 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
A czasami nie miałeś tego wcześniej ściągniętego? Ta opcja umask w transmission działa na nowe pobierane, nie na to co już było na dysku.
Możliwe i to nawet pewne, bo jak nadałem ponownie do wybranego konkretnie folderu chmod 777 - to zadziałało
Ale teraz mam takie coś , bo mam skrypt przy logowaniu przez ssh :
May 5 22:20:28 OpenWrt kern.err kernel: [ 1.811947] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
May 5 22:20:28 OpenWrt kern.warn kernel: [ 1.835691] pata_via 0000:00:11.1: can't derive routing for PCI INT A
May 5 22:20:28 OpenWrt kern.warn kernel: [ 2.302297] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 5 22:20:28 OpenWrt kern.warn kernel: [ 6.736235] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
May 5 22:20:28 OpenWrt kern.warn kernel: [ 26.996753] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommendedI tak co któryś raz się wszystko zawiesza przy starcie,
Jak mam zeskanować sda1,2 jeśli są używane i do tego na nich jest właśnie openwrt !? reszty błędów nie rozumiem
Nie możesz. Musisz użyć zewnętrznego nośnika. Resztą na tym poziomie się nie przejmuj.
wrzuciłem od nowa moje ostatnie skompilowane openwrt (bez naprawiania czy tam skanowania plików) ten terminal ma takiee problemy z botowaniem czego kolwiek z usb, że na pare pendrive tylko właściwie jeden czyta, reszta boot error lub się poprostu zawiesza. Wiec spróbowałem tylko nowego openwrt - zobaczymy czy cokolwiek to da 
May 10 18:28:00 OpenWrt user.crit mountd[1545]: mounting /tmp/run/mountd/sda1
May 10 18:28:00 OpenWrt user.crit mountd[1570]: mount -t ext2 -o rw,defaults /dev/sda1 /tmp/run/mountd/sda1
May 10 18:28:00 OpenWrt user.crit mountd[1545]: ----------> mount ret = 0
May 11 15:29:14 OpenWrt user.crit mountd[1545]: /tmp/run/mountd/sda1 has expired... unmounting
May 11 15:29:14 OpenWrt user.crit mountd[1545]: finished unmounting[root@OpenWrt /root]# fdisk -l
Disk /dev/sda: 128 MB, 128188416 bytes
16 heads, 63 sectors/track, 248 cylinders, total 250368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 63 9071 4504+ 83 Linux
/dev/sda2 9135 107855 49360+ 83 Linux
[root@OpenWrt /root]#Czyli znowu zaraz padnie?
Raczej sprawdź system plików po prostu.
jak powinien być prawidłowo sformatowany hdd żeby normalnie mi działa ? bo nie mogę sobie poradzić. Podłaczam karty wifi - wszystko działa . Podłaczam czy to pendrive czy hdd na zasilaczu osobnym - wszystko odrazu mi się wiesza.
Ext2,3,4 i partycja primary/logical?
NIe ma znaczenia i system plików i podział partycji. W każdej sytuacji powinien to rozpoznać.
Czasami nie brakuje Ci zasilania na tym usb?
sam już nie wiem 
Mam hdd 3,5" na osobnym zasilaczu - na pc normalnie działa. Na terminalu chwilkę temu tez działał i to nawet pare dni. Po czasie same problemy, przeformatowałem ponownie i dalej bez zmian- wszystko zawiesza
może ktoś zerknąć, bo co któryś raz nie chce się wcale openwrt właczyć, wyświetla wczytywanie kernelu i tak stoi. Wyłacze terminal na pare minut - włącze ponownie i jest normalnie
Kernel Log
[ 0.000000] Linux version 3.3.8 (root@debian) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #6 Tue Apr 15 19:55:51 CEST 2014
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d6000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xf7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 00F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 7 base 0D8000000 mask 0FC000000 write-combining
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009e000] 9e000 size 4096
[ 0.000000] init_memory_mapping: 0000000000000000-000000000f7f0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000f400000 page 2M
[ 0.000000] 000f400000 - 000f7f0000 page 4k
[ 0.000000] kernel direct mapping tables up to f7f0000 @ 17fb000-1800000
[ 0.000000] ACPI: RSDP 000fa5f0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 0f7f0000 00028 (v01 AMIINT VIA_P6 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 0f7f0030 00081 (v01 AMIINT VIA_P6 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0f7f0120 02E1E (v01 VIA APOLLO-P 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0f7f8000 00040
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7f0000
[ 0.000000] low ram: 0 - 0f7f0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000f7f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000f7f0
[ 0.000000] On node 0 totalpages: 63359
[ 0.000000] free_area_init_node: node 0, pgdat c13f5320, node_mem_map cf600200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 464 pages used for memmap
[ 0.000000] Normal zone: 58912 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] Allocating PCI resources starting at f800000 (gap: f800000:f0780000)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62863
[ 0.000000] Kernel command line: root=/dev/sda2 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8 noinitrd reboot=bios
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 246560k/253888k available (3169k kernel code, 6876k reserved, 900k data, 312k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] vmalloc : 0xcfff0000 - 0xfffa0000 ( 767 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB)
[ 0.000000] .init : 0xc13fa000 - 0xc1448000 ( 312 kB)
[ 0.000000] .data : 0xc1318524 - 0xc13f9840 ( 900 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1318524 (3169 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf006000 soft=cf008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 796.069 MHz processor.
[ 0.030009] Calibrating delay loop (skipped), value calculated using timer frequency.. 1592.13 BogoMIPS (lpj=7960690)
[ 0.050009] pid_max: default: 32768 minimum: 301
[ 0.060224] Mount-cache hash table entries: 512
[ 0.070600] CPU: Centaur VIA Nehemiah stepping 0a
[ 0.093900] ACPI: Core revision 20120111
[ 0.111599] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.121272] Performance Events:
[ 0.130965] NET: Registered protocol family 16
[ 0.141285] ACPI: bus type pci registered
[ 0.153298] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
[ 0.160008] PCI: Using configuration type 1 for base access
[ 0.186186] bio: create slab <bio-0> at 0
[ 0.190453] ACPI: Added _OSI(Module Device)
[ 0.200015] ACPI: Added _OSI(Processor Device)
[ 0.210009] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.220009] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.231465] ACPI: EC: Look up EC in DSDT
[ 0.246035] ACPI: Interpreter enabled
[ 0.250015] ACPI: (supports S0 S5)
[ 0.261807] ACPI: Using PIC for interrupt routing
[ 0.275168] ACPI: Power Resource [URP1] (off)
[ 0.281546] ACPI: Power Resource [URP2] (off)
[ 0.290252] ACPI: Power Resource [FDDP] (off)
[ 0.300233] ACPI: Power Resource [LPTP] (off)
[ 0.315219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.320360] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.330305] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.340013] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.350012] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.360012] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.370012] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffdfffff]
[ 0.390086] PCI host bridge to bus 0000:00
[ 0.400014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.410011] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.420011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.430011] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.440012] pci_bus 0000:00: root bus resource [mem 0x10000000-0xffdfffff]
[ 0.450043] pci 0000:00:00.0: [1106:3123] type 0 class 0x000600
[ 0.450075] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[ 0.450202] pci 0000:00:01.0: [1106:b091] type 1 class 0x000604
[ 0.450278] pci 0000:00:01.0: supports D1
[ 0.450338] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.450406] pci 0000:00:10.0: reg 20: [io 0xec00-0xec1f]
[ 0.450467] pci 0000:00:10.0: supports D1 D2
[ 0.450479] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.450528] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[ 0.450560] pci 0000:00:10.3: reg 10: [mem 0xdfffff00-0xdfffffff]
[ 0.450657] pci 0000:00:10.3: supports D1 D2
[ 0.450669] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.450717] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[ 0.450804] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.460022] pci 0000:00:11.0: quirk: [io 0x0800-0x087f] claimed by vt8235 PM
[ 0.470014] pci 0000:00:11.0: quirk: [io 0x0400-0x040f] claimed by vt8235 SMB
[ 0.480075] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[ 0.480146] pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.480245] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.480278] pci 0000:00:11.5: reg 10: [io 0xe800-0xe8ff]
[ 0.480379] pci 0000:00:11.5: supports D1 D2
[ 0.480421] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.480453] pci 0000:00:12.0: reg 10: [io 0xe400-0xe4ff]
[ 0.480476] pci 0000:00:12.0: reg 14: [mem 0xdffffe00-0xdffffeff]
[ 0.480567] pci 0000:00:12.0: supports D1 D2
[ 0.480578] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.480676] pci 0000:01:00.0: [1106:3122] type 0 class 0x000300
[ 0.480707] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
[ 0.480730] pci 0000:01:00.0: reg 14: [mem 0xde000000-0xdeffffff]
[ 0.480781] pci 0000:01:00.0: reg 30: [mem 0xdfef0000-0xdfefffff pref]
[ 0.480827] pci 0000:01:00.0: supports D1 D2
[ 0.480881] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.490019] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff]
[ 0.490037] pci 0000:00:01.0: bridge window [mem 0xd5d00000-0xddcfffff pref]
[ 0.490060] pci_bus 0000:00: on NUMA node 0
[ 0.490087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.490640] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
[ 0.511549] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.533745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.559889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.572014] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.594629] SCSI subsystem initialized
[ 0.600345] libata version 3.00 loaded.
[ 0.600633] usbcore: registered new interface driver usbfs
[ 0.610150] usbcore: registered new interface driver hub
[ 0.620141] usbcore: registered new device driver usb
[ 0.630438] PCI: Using ACPI for IRQ routing
[ 0.640025] PCI: pci_cache_line_size set to 32 bytes
[ 0.640135] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.640149] reserve RAM buffer: 000000000f7f0000 - 000000000fffffff
[ 0.640863] Switching to clocksource pit
[ 0.650364] pnp: PnP ACPI init
[ 0.659659] ACPI: bus type pnp registered
[ 0.672218] pnp 00:00: [bus 00-ff]
[ 0.672233] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.672246] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.672258] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.672273] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.672286] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.672299] pnp 00:00: [mem 0x10000000-0xffdfffff window]
[ 0.672674] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.672876] pnp 00:01: [dma 4]
[ 0.672888] pnp 00:01: [io 0x0000-0x000f]
[ 0.672900] pnp 00:01: [io 0x0081-0x0083]
[ 0.672910] pnp 00:01: [io 0x0087]
[ 0.672921] pnp 00:01: [io 0x0089-0x008b]
[ 0.672931] pnp 00:01: [io 0x008f]
[ 0.672942] pnp 00:01: [io 0x00c0-0x00df]
[ 0.673147] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.673202] pnp 00:02: [io 0x0070-0x0071]
[ 0.673219] pnp 00:02: [irq 8]
[ 0.673377] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.673421] pnp 00:03: [io 0x0061]
[ 0.673572] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.673618] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.673630] pnp 00:04: [irq 13]
[ 0.673784] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.673938] pnp 00:05: [io 0x0060]
[ 0.673949] pnp 00:05: [io 0x0064]
[ 0.673961] pnp 00:05: [irq 1]
[ 0.674142] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.674420] pnp 00:06: [io 0x03f2-0x03f3]
[ 0.674433] pnp 00:06: [io 0x03f4-0x03f5]
[ 0.674444] pnp 00:06: [io 0x03f7]
[ 0.674456] pnp 00:06: [irq 6]
[ 0.674467] pnp 00:06: [dma 2]
[ 0.674792] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.675316] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.675331] pnp 00:07: [irq 4]
[ 0.675703] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.676726] pnp 00:08: [io 0x0278-0x027f]
[ 0.676739] pnp 00:08: [io 0x0678-0x067b]
[ 0.676752] pnp 00:08: [irq 7]
[ 0.676764] pnp 00:08: [dma 3]
[ 0.677160] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.677706] pnp: PnP ACPI: found 9 devices
[ 0.680169] ACPI: ACPI bus type pnp unregistered
[ 0.738500] Switching to clocksource acpi_pm
[ 0.751500] PCI: max bus depth: 1 pci_try_num: 2
[ 0.751556] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.767360] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff]
[ 0.787816] pci 0000:00:01.0: bridge window [mem 0xd5d00000-0xddcfffff pref]
[ 0.809638] pci 0000:00:01.0: setting latency timer to 64
[ 0.809657] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.809671] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.809685] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809700] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.809715] pci_bus 0000:00: resource 8 [mem 0x10000000-0xffdfffff]
[ 0.809731] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff]
[ 0.809746] pci_bus 0000:01: resource 2 [mem 0xd5d00000-0xddcfffff pref]
[ 0.809935] NET: Registered protocol family 2
[ 0.823287] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.844294] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.865859] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.885456] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.904602] TCP reno registered
[ 0.914142] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.931770] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.951053] NET: Registered protocol family 1
[ 0.964302] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.982212] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.999544] PCI: setting IRQ 11 as level-triggered
[ 0.999840] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.017169] PCI: setting IRQ 10 as level-triggered
[ 1.017292] pci 0000:01:00.0: Boot video device
[ 1.017305] PCI: CLS 32 bytes, default 32
[ 1.017977] scx200: NatSemi SCx200 Driver
[ 1.047319] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.065008] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.094925] msgmni has been set to 481
[ 1.106350] io scheduler noop registered
[ 1.118231] io scheduler deadline registered (default)
[ 1.135059] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.159777] ACPI: Power Button [PWRB]
[ 1.171161] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.195844] ACPI: Sleep Button [SLPB]
[ 1.207202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.229531] ACPI: Power Button [PWRF]
[ 1.241398] isapnp: Scanning for PnP cards...
[ 1.611460] isapnp: No Plug & Play device found
[ 1.625657] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.665654] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.705196] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.723028] Non-volatile memory driver v1.3
[ 1.735746] VIA RNG detected
[ 1.744635] Linux agpgart interface v0.103
[ 1.757266] [drm] Initialized drm 1.1.0 20060810
[ 1.771218] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 1.794923] pata_via 0000:00:11.1: version 0.3.4
[ 1.794973] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 1.816063] scsi0 : pata_via
[ 1.825294] scsi1 : pata_via
[ 1.834340] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.855323] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.877749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.897634] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 1.913458] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 1.935938] ehci_hcd 0000:00:10.3: irq 10, io mem 0xdfffff00
[ 1.970070] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 1.988144] hub 1-0:1.0: USB hub found
[ 1.999531] hub 1-0:1.0: 2 ports detected
[ 2.012021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.030738] Refined TSC clocksource calibration: 796.090 MHz.
[ 2.048078] Switching to clocksource tsc
[ 2.060260] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.079579] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.096356] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.118746] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
[ 2.137656] hub 2-0:1.0: USB hub found
[ 2.149070] hub 2-0:1.0: 2 ports detected
[ 2.161889] ata1.00: ATA-0: EMBEDDISK ID128MB, 3.00, max PIO4
[ 2.179516] ata1.00: 250368 sectors, multi 0: LBA
[ 2.194293] Initializing USB Mass Storage driver...
[ 2.209271] usbcore: registered new interface driver usb-storage
[ 2.227382] USB Mass Storage support registered.
[ 2.241771] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.262222] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.293582] ata1.00: configured for PIO4
[ 2.305856] scsi 0:0:0:0: Direct-Access ATA EMBEDDISK ID128 3.00 PQ: 0 ANSI: 5
[ 2.331242] sd 0:0:0:0: [sda] 250368 512-byte logical blocks: (128 MB/122 MiB)
[ 2.353719] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.369152] sd 0:0:0:0: [sda] Write Protect is off
[ 2.383664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.384214] mousedev: PS/2 mouse device common for all mice
[ 2.401301] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.429407] rtc_cmos 00:02: RTC can wake from S4
[ 2.443879] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.462340] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 2.480816] cpuidle: using governor ladder
[ 2.494391] cpuidle: using governor menu
[ 2.506629] sda: sda1 sda2
[ 2.527343] TCP cubic registered
[ 2.537169] NET: Registered protocol family 17
[ 2.550774] 8021q: 802.1Q VLAN Support v1.8
[ 2.563473] Using IPI Shortcut mode
[ 2.574735] rtc_cmos 00:02: setting system clock to 2014-05-19 18:22:10 UTC (1400523730)
[ 2.600658] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.620315] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.660631] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 2.681931] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 2.702025] Freeing unused kernel memory: 312k freed
[ 6.617774] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 6.644489] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 26.865960] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 27.378031] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
[ 27.402003] Backport generated by backports.git backports-20140124-0-g1256d3e
[ 27.511505] cfg80211: Calling CRDA to update world regulatory domain
[ 27.530748] cfg80211: World regulatory domain updated:
[ 27.546285] cfg80211: DFS Master region: unset
[ 27.559396] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.584712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.608078] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.631450] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.654820] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 27.678188] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 27.701559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 27.777625] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 27.777635] originally by Donald Becker <becker@scyld.com>
[ 27.777641] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 28.232912] usbcore: registered new interface driver rt2800usb
[ 28.293225] PPP generic driver version 2.4.2
[ 28.328849] PPP MPPE Compression module registered
[ 28.386055] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 28.407353] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 28.433306] GRE over IPv4 demultiplexor driver
[ 28.459679] GRE over IPv4 tunneling driver
[ 28.509299] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.627347] NET: Registered protocol family 24
[ 28.666747] nf_conntrack version 0.5.0 (3857 buckets, 15428 max)
[ 28.769653] PPTP driver version 0.8.5
[ 28.890269] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 28.925646] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 28.944122] e100: Copyright(c) 1999-2006 Intel Corporation
[ 28.982272] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 29.019215] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 29.080999] sis900.c: v1.08.10 Apr. 2 2006
[ 29.165243] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 29.190266] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xdffffe00, 44:4d:50:e2:89:4e, IRQ 11
[ 29.217269] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
[ 29.310290] usbcore: registered new interface driver ath9k_htc
[ 29.360607] fuse init (API version 7.18)
[ 31.673369] device eth0 entered promiscuous mode
[ 31.688941] br-lan: port 1(eth0) entered listening state
[ 31.705033] br-lan: port 1(eth0) entered listening state
[ 33.700049] br-lan: port 1(eth0) entered learning state
[ 35.700058] br-lan: topology change detected, propagating
[ 35.716414] br-lan: port 1(eth0) entered forwarding state
[ 42.922751] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 42.971661] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)system log
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.159777] ACPI: Power Button [PWRB]
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.171161] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.195844] ACPI: Sleep Button [SLPB]
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.207202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.229531] ACPI: Power Button [PWRF]
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.241398] isapnp: Scanning for PnP cards...
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.611460] isapnp: No Plug & Play device found
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.625657] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.665654] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.705196] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.723028] Non-volatile memory driver v1.3
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.735746] VIA RNG detected
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.744635] Linux agpgart interface v0.103
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.757266] [drm] Initialized drm 1.1.0 20060810
May 19 20:22:38 OpenWrt kern.err kernel: [ 1.771218] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
May 19 20:22:38 OpenWrt kern.debug kernel: [ 1.794923] pata_via 0000:00:11.1: version 0.3.4
May 19 20:22:38 OpenWrt kern.warn kernel: [ 1.794973] pata_via 0000:00:11.1: can't derive routing for PCI INT A
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.816063] scsi0 : pata_via
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.825294] scsi1 : pata_via
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.834340] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.855323] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.877749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.897634] ehci_hcd 0000:00:10.3: EHCI Host Controller
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.913458] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.935938] ehci_hcd 0000:00:10.3: irq 10, io mem 0xdfffff00
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.970070] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.988144] hub 1-0:1.0: USB hub found
May 19 20:22:38 OpenWrt kern.info kernel: [ 1.999531] hub 1-0:1.0: 2 ports detected
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.012021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.030738] Refined TSC clocksource calibration: 796.090 MHz.
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.048078] Switching to clocksource tsc
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.060260] uhci_hcd: USB Universal Host Controller Interface driver
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.079579] uhci_hcd 0000:00:10.0: UHCI Host Controller
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.096356] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.118746] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.137656] hub 2-0:1.0: USB hub found
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.149070] hub 2-0:1.0: 2 ports detected
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.161889] ata1.00: ATA-0: EMBEDDISK ID128MB, 3.00, max PIO4
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.179516] ata1.00: 250368 sectors, multi 0: LBA
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.194293] Initializing USB Mass Storage driver...
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.209271] usbcore: registered new interface driver usb-storage
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.227382] USB Mass Storage support registered.
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.241771] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
May 19 20:22:38 OpenWrt kern.warn kernel: [ 2.262222] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.293582] ata1.00: configured for PIO4
May 19 20:22:38 OpenWrt kern.notice kernel: [ 2.305856] scsi 0:0:0:0: Direct-Access ATA EMBEDDISK ID128 3.00 PQ: 0 ANSI: 5
May 19 20:22:38 OpenWrt kern.notice kernel: [ 2.331242] sd 0:0:0:0: [sda] 250368 512-byte logical blocks: (128 MB/122 MiB)
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.353719] serio: i8042 KBD port at 0x60,0x64 irq 1
May 19 20:22:38 OpenWrt kern.notice kernel: [ 2.369152] sd 0:0:0:0: [sda] Write Protect is off
May 19 20:22:38 OpenWrt kern.debug kernel: [ 2.383664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.384214] mousedev: PS/2 mouse device common for all mice
May 19 20:22:38 OpenWrt kern.notice kernel: [ 2.401301] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.429407] rtc_cmos 00:02: RTC can wake from S4
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.443879] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.462340] rtc0: alarms up to one year, y3k, 114 bytes nvram
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.480816] cpuidle: using governor ladder
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.494391] cpuidle: using governor menu
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.506629] sda: sda1 sda2
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.527343] TCP cubic registered
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.537169] NET: Registered protocol family 17
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.550774] 8021q: 802.1Q VLAN Support v1.8
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.563473] Using IPI Shortcut mode
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.574735] rtc_cmos 00:02: setting system clock to 2014-05-19 18:22:10 UTC (1400523730)
May 19 20:22:38 OpenWrt kern.notice kernel: [ 2.600658] sd 0:0:0:0: [sda] Attached SCSI disk
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.620315] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.660631] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.681931] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
May 19 20:22:38 OpenWrt kern.info kernel: [ 2.702025] Freeing unused kernel memory: 312k freed
May 19 20:22:38 OpenWrt kern.warn kernel: [ 6.617774] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
May 19 20:22:38 OpenWrt kern.info kernel: [ 6.644489] EXT4-fs (sda2): re-mounted. Opts: (null)
May 19 20:22:38 OpenWrt kern.info kernel: [ 26.865960] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.378031] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.402003] Backport generated by backports.git backports-20140124-0-g1256d3e
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.511505] cfg80211: Calling CRDA to update world regulatory domain
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.530748] cfg80211: World regulatory domain updated:
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.546285] cfg80211: DFS Master region: unset
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.559396] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.584712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.608078] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.631450] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.654820] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.678188] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.701559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.777625] natsemi dp8381x driver, version 2.1, Sept 11, 2006
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.777635] originally by Donald Becker <becker@scyld.com>
May 19 20:22:38 OpenWrt kern.info kernel: [ 27.777641] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.232912] usbcore: registered new interface driver rt2800usb
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.293225] PPP generic driver version 2.4.2
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.328849] PPP MPPE Compression module registered
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.386055] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.407353] e1000: Copyright (c) 1999-2006 Intel Corporation.
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.433306] GRE over IPv4 demultiplexor driver
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.459679] GRE over IPv4 tunneling driver
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.509299] ip_tables: (C) 2000-2006 Netfilter Core Team
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.627347] NET: Registered protocol family 24
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.666747] nf_conntrack version 0.5.0 (3857 buckets, 15428 max)
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.769653] PPTP driver version 0.8.5
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.890269] 8139too: 8139too Fast Ethernet driver 0.9.28
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.925646] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.944122] e100: Copyright(c) 1999-2006 Intel Corporation
May 19 20:22:38 OpenWrt kern.info kernel: [ 28.982272] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.019215] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.080999] sis900.c: v1.08.10 Apr. 2 2006
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.165243] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.190266] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xdffffe00, 44:4d:50:e2:89:4e, IRQ 11
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.217269] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.310290] usbcore: registered new interface driver ath9k_htc
May 19 20:22:38 OpenWrt kern.info kernel: [ 29.360607] fuse init (API version 7.18)
May 19 20:22:39 OpenWrt kern.info kernel: [ 31.673369] device eth0 entered promiscuous mode
May 19 20:22:39 OpenWrt kern.info kernel: [ 31.688941] br-lan: port 1(eth0) entered listening state
May 19 20:22:39 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
May 19 20:22:39 OpenWrt kern.info kernel: [ 31.705033] br-lan: port 1(eth0) entered listening state
May 19 20:22:39 OpenWrt daemon.notice netifd: lan (1048): udhcpc (v1.19.4) started
May 19 20:22:39 OpenWrt daemon.notice netifd: lan (1048): Sending discover...
May 19 20:22:41 OpenWrt kern.info kernel: [ 33.700049] br-lan: port 1(eth0) entered learning state
May 19 20:22:42 OpenWrt daemon.notice netifd: lan (1048): Sending discover...
May 19 20:22:43 OpenWrt kern.info kernel: [ 35.700058] br-lan: topology change detected, propagating
May 19 20:22:43 OpenWrt kern.info kernel: [ 35.716414] br-lan: port 1(eth0) entered forwarding state
May 19 20:22:44 OpenWrt user.info sysinit: PHY for wifi device radio0 not found
May 19 20:22:44 OpenWrt user.info sysinit: PHY for wifi device radio1 not found
May 19 20:22:44 OpenWrt user.info sysinit: PHY for wifi device radio0 not found
May 19 20:22:44 OpenWrt user.info sysinit: PHY for wifi device radio1 not found
May 19 20:22:44 OpenWrt user.info sysinit: PHY for wifi device radio0 not found
May 19 20:22:44 OpenWrt user.info sysinit: PHY for wifi device radio1 not found
May 19 20:22:44 OpenWrt authpriv.info dropbear[1157]: Running in background
May 19 20:22:45 OpenWrt daemon.notice netifd: lan (1048): Sending discover...
May 19 20:22:45 OpenWrt daemon.notice netifd: lan (1048): Sending select for 192.168.1.22...
May 19 20:22:45 OpenWrt daemon.notice netifd: lan (1048): Lease of 192.168.1.22 obtained, lease time 600
May 19 20:22:46 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
May 19 20:22:46 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
May 19 20:22:46 OpenWrt daemon.notice netifd: Interface 'lan' is now up
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: started, version 2.66 cachesize 150
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: using local addresses only for domain lan
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: reading /tmp/resolv.conf.auto
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: using nameserver 192.168.1.1#53
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: using local addresses only for domain lan
May 19 20:22:46 OpenWrt daemon.info dnsmasq[1233]: read /etc/hosts - 1 addresses
May 19 20:22:46 OpenWrt user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
May 19 20:22:46 OpenWrt daemon.info pptpd[1248]: MGR: Maximum of 100 connections reduced to 9, not enough IP addresses given
May 19 20:22:46 OpenWrt daemon.info pptpd[1251]: MGR: Manager process started
May 19 20:22:46 OpenWrt daemon.info pptpd[1251]: MGR: Maximum of 9 connections available
May 19 20:22:48 OpenWrt user.crit mountd[1373]: Starting OpenWrt (auto)mountd V1
May 19 20:22:48 OpenWrt user.crit mountd[1373]: trying to mount /tmp/run/mountd/ as the autofs root
May 19 20:22:49 OpenWrt user.crit mountd[1373]: new mount : Disc-A2 -> sda2 (EXT2)
May 19 20:22:49 OpenWrt user.crit mountd[1373]: mounting /tmp/run/mountd/sda2
May 19 20:22:49 OpenWrt user.crit mountd[1480]: mount -t ext2 -o rw,defaults /dev/sda2 /tmp/run/mountd/sda2
May 19 20:22:49 OpenWrt user.crit mountd[1373]: ----------> mount ret = 255
May 19 20:22:50 OpenWrt user.crit mountd[1373]: new mount : Disc-A1 -> sda1 (EXT2)
May 19 20:22:50 OpenWrt user.crit mountd[1373]: mounting /tmp/run/mountd/sda1
May 19 20:22:50 OpenWrt user.crit mountd[1594]: mount -t ext2 -o rw,defaults /dev/sda1 /tmp/run/mountd/sda1
May 19 20:22:50 OpenWrt kern.info kernel: [ 42.922751] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
May 19 20:22:50 OpenWrt kern.info kernel: [ 42.971661] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
May 19 20:22:50 OpenWrt user.crit mountd[1373]: ----------> mount ret = 0
May 19 20:22:51 OpenWrt daemon.err transmission-daemon[1581]: UDP Failed to set receive buffer: requested 4194304, got 327680 (tr-udp.c:77)
May 19 20:22:51 OpenWrt daemon.err transmission-daemon[1581]: UDP Failed to set send buffer: requested 1048576, got 327680 (tr-udp.c:88)
May 20 17:24:05 OpenWrt user.crit mountd[1373]: /tmp/run/mountd/sda1 has expired... unmounting
May 20 17:24:05 OpenWrt user.crit mountd[1373]: finished unmountingpo podłaczeniu się przez ssh
log powitalny :
May 19 20:22:50 OpenWrt user.crit mountd[1373]: ----------> mount ret = 0
May 19 20:22:51 OpenWrt daemon.err transmission-daemon[1581]: UDP Failed to set receive buffer: requested 4194304, got 327680 (tr-udp.c:77)
May 19 20:22:51 OpenWrt daemon.err transmission-daemon[1581]: UDP Failed to set send buffer: requested 1048576, got 327680 (tr-udp.c:88)
May 20 17:24:05 OpenWrt user.crit mountd[1373]: /tmp/run/mountd/sda1 has expired... unmounting
May 20 17:24:05 OpenWrt user.crit mountd[1373]: finished unmounting
[root@OpenWrt /root]#
Oddaj ten złom do ZUO, szkoda czasu i nerwów.
hmm, jesli nie mogę podłaczyć żadnego urządzenia, może zmapuje przez ftp jako folder na openwrt. Gdzie mam podpięty pendrive pod mój domowy router z tomato.
zamontuje go jako folder i spróbuje używać torrentów? czy takie coś jest bez sensu ?
znalazłem jak montować ftp > http://openrouter.info/index.php?option … ;Itemid=61
na samym dole, lecz jak to zamontować jeśli jest user/hasło?
May 20 17:24:05 OpenWrt user.crit mountd[1373]: /tmp/run/mountd/sda1 has expired... unmounting
Bo przekroczyłeś liczbę montowań bez sprawdzenia? A tak po za tym to powiedź co Cię skłoniło do używania takiego czegoś jak mountd.
Co do pytania: http://linux.die.net/man/1/curlftpfs i przeczytaj manual. Znajdziesz odpowiedź jak to zrobić.
Bo przekroczyłeś liczbę montowań bez sprawdzenia? A tak po za tym to powiedź co Cię skłoniło do używania takiego czegoś jak mountd.Nie rozumiem . coś mam usunąć ? i nie mam jak odpalić innego systemu, bo nie mogę pendrive zbootować.
co do manuala, widzę że użyć proxy, ale nie wiem jak
curlftpfs 192.168.1.1 /mnt i gdzie mam tu niby dać user/hasło ?
curlftpfs 192.168.1.1 user=<user1:hasło1> /mnt , wywala ze nie ma takiej lokalizacji
lub :
curlftpfs user=<user1:hasło1> 192.168.1.1 /mnt - to samo
Ps. czemu nie widzę podmontowanego ftp (bez usera/hasła - anonymous) w miejscu sieciowym ? jak je zamontowąłem pod /mnt/ftp. W miejscu sieciowym i na openwrt tego folderu nie ma. A jak dam w configu samby bezpośredio do niego to nie mogę wejść do folderu
Ehh.... a curlftpfs ftp://użytkownik:hasło@host /coś próbowałeś? A -o user= ... próbowałeś? Nie user= samo. Czytaj ze zrozumieniem...
[root@OpenWrt /root]# curlftpfs ftp://user1:hasło1@192.168.1.1:port /mnt/test
Error connecting to ftp: Couldn't resolve host 'Maniek'
-ash: *@192.168.1.1:port: not found
gdzie na końcu hasła mam * ..
Więc zmień hasło albo zrób chociaż escape przed tą gwiazdką. Kurcze, sam sobie kłopoty sprawiasz a później masz żale na forum.
Cezary masz jakiś zły dzień czy co? próbuje to zrobić , a to że mam trudniejsze hasło niż hasło1 czy 123456 to raczej jest konieczne.
A co do tego że tego folderu zamontowanego , narazie anonimowo przez ftp, nie widzę w miejscu sieciowym?
Tak samo nie mogę użyć
[root@OpenWrt /root]# chmod 777 /mnt/ftp/
chmod: /mnt/ftp/: Operation not permittedJeszcze raz: zanim zadasz kolejne pytanie tego typu, przeczytaj manual od curlftpfs. O uprawnieniach też tam jest.
Udostępniasz w sambie katalog /mnt/ftp/ ?
tak i nie mogę do tego folderu wcale wejść, albo go nie ma, jeśli ustawie folderu /mnt/ w sambie
Cezary możesz mi powiedzieć co ustawić w make menuconfig abym miał maksymalną możliwą pamięć w openwrt , obecnie w zakładce System> software ? mam kartę pamięci 128 mb, jeśli dobrze pamiętam na początku miałem jakoś 30 mb do wykorzystania, a wątpie że cały openwrt waży 128 mb , przydzieliło pewnie jako tmp, a raczej bym potrzebował to do filesystem.
[root@OpenWrt /root]# fdisk -l
Disk /dev/sda: 128 MB, 128188416 bytes
16 heads, 63 sectors/track, 248 cylinders, total 250368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 63 9071 4504+ 83 Linux
/dev/sda2 9135 107855 49360+ 83 LinuxGdzie to ustawić ? i jaka wartość?
Musisz sobie rozszerzyć partycję i system plików.
właczam system gdzie kompiluje sobie openwrt od podstaw, wpisuje make menuconfig i szukam (gdzieś widziałem własnie wielkość pamięci (chyba domyślnie 50 mb ) wiec reszta się marnuje, mogę ustawić max jaki mam czylu 128 mb ?
Możesz, choć prościej jest rozszerzyć później partycję na nośniku.
Strony Poprzednia 1 2 3 4 5 6 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → 12.09.01
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc