Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → Instalacja pluginów dla routerów z 4MB flash i USB
Strony Poprzednia 1 2 3 4 5 6 7 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
Zainstalowałem dzisiaj wersję 1.6.0.4 na MR13u z rozszerzonym flashem. I po wykonaniu kroku usunięcia haser1 mam taki komunikat
opkg remove haserl
Removing package haserl from root...
Collected errors:
* pkg_get_installed_files: Failed to open //usr/lib/opkg/info/wol.list: No such file or directory.Tak po za tym, czy mogę wgrać "powiększony" obraz od MR-3040 do MR13u?
A masz tam więcej flash żeby wgrać taki obraz?
Zrób touch /usr/lib/opkg/info/wol.list
Też tu utknąłem...
Po pomyślnej sekwencji:
opkg install opkg
opkg remove haserl # (choć raportuje, że nie ma co usuwać, ale może tak ma być w obecnym 1.6.0.4)
opkg install haserl-i18n
opkg install --nodeps gargoyle-i18nto już tego:
root@Gargoyle:~# opkg install plugin-gargoyle-i18n-English-EN
Installing plugin-gargoyle-i18n-English-EN (1.0.0-1) to root...
Downloading http://ecco.selfip.net/gargoyle-pl/attitude_adjustment/ar71xx/plugins/plugin-gargoyle-i18n-English-EN_1.0.0-1_all.ipk
Installing gargoyle (1.6.0.4-6) to root...
Collected errors:
* opkg_download_pkg: Package gargoyle is not available from any configured src.
* opkg_install_pkg: Failed to download gargoyle. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package plugin-gargoyle-i18n-English-EN.mimo tego
root@Gargoyle:~# cat /etc/opkg.conf
src/gz attitude_adjustment http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages
src/gz gargoylepl_plugins http://ecco.selfip.net/gargoyle-pl/attitude_adjustment/ar71xx/plugins
src/gz gargoylepl_packages http://ecco.selfip.net/gargoyle-pl/attitude_adjustment/ar71xx/packages
dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlaynie wiem jak przeskoczyć...
opkg install gargoyle zrób
Też nie bangla:
Installing gargoyle (1.6.0.4-6) to root...
Collected errors:
* opkg_download_pkg: Package gargoyle is not available from any configured src.
* opkg_install_pkg: Failed to download gargoyle. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package gargoyle.opkg update, a wcześniej opkg install opkg bez zgrzytów
Sciągnij z repo sam plik gargoyle i zainstaluj go lokalnie.
Tak poszło.
root@Gargoyle:/tmp# opkg install /tmp/gargoyle_1.6.0.4-6_ar71xx.ipk
Installing gargoyle (1.0.0-6) to root...
Configuring gargoyle.
I teraz ten krok?
opkg install plugin-gargoyle-i18n-English-EN
Itd, tak.
Oj, też coś grymasi:
root@Gargoyle:/tmp# opkg install plugin-gargoyle-i18n-English-EN
Installing plugin-gargoyle-i18n-English-EN (1.0.0-1) to root...
Downloading http://ecco.selfip.net/gargoyle-pl/atti … -1_all.ipk.
Configuring plugin-gargoyle-i18n-English-EN.
//usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst: exit: line 129: Illegal number: -1
Collected errors:
* pkg_run_script: package "plugin-gargoyle-i18n-English-EN" postinst script returned status 2.
* opkg_configure: plugin-gargoyle-i18n-English-EN.postinst returned 2.
Z tym ze postinst nie ma linii 129...
Zrób cat /usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst
ale tu:
/usr/lib/gargoyle/i18nServices.sh
pewnie by się znalazła 
EDIT: ale wygląda na pustą..
więc wykaszania się na - restart_lang_services ?
Więc gargoyle-i18n nie zainstalowałeś? W ogóle jakieś dziwne problemy masz.
Skądże - wszystkie po kolei wedle Igo postu tego wątku. Polecę jeszcze raz:
root@Gargoyle:~# opkg install opkg
Package opkg (618-3) installed in root is up to date.
root@Gargoyle:~# opkg remove haserl
No packages removed.
root@Gargoyle:~# opkg install haserl-i18n
Installing haserl-i18n (0.9.26-1) to root...
Downloading http://ecco.selfip.net/gargoyle-pl/atti … ar71xx.ipk.
Configuring haserl-i18n.
root@Gargoyle:~# opkg install --nodeps gargoyle-i18n
Installing gargoyle-i18n (0.2.1-1) to root...
Downloading http://ecco.selfip.net/gargoyle-pl/atti … -1_all.ipk.
Configuring gargoyle-i18n.
root@Gargoyle:~# opkg install plugin-gargoyle-i18n-English-EN
Installing plugin-gargoyle-i18n-English-EN (1.0.0-1) to root...
Downloading http://ecco.selfip.net/gargoyle-pl/atti … -1_all.ipk.
Configuring plugin-gargoyle-i18n-English-EN.
//usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst: exit: line 129: Illegal number: -1
Collected errors:
* pkg_run_script: package "plugin-gargoyle-i18n-English-EN" postinst script returned status 2.
* opkg_configure: plugin-gargoyle-i18n-English-EN.postinst returned 2.
EDIT:
Wybrnąć udaje się przechodząc mimo to do dalszych kroków:
# opkg install --force-reinstall ddns-gargoyle (choć to też tylko z pobranego .ipk)
i dalej
# uci set gargoyle.global.fallback_lang=English-EN
# uci set gargoyle.global.language=Polish-PL
# uci set gargoyle.global.theme='Blue Ice'
# uci commit gargoyle
# for i in /rom/etc/uci-defaults/plugin-gargoyle*; do sh $i; done
# reboot
W Najnowszym Gargoyle występują problemy z instalacją :
| Gargoyle PL 1.6.0.5 (bb2b1ed)
| OpenWrt Attitude Adjustment 12.09.1 (r40431)
| Build time: 2014-04-11 12:35 CEST
|
| Cezary Jackiewicz (obsy), http://eko.one.pl
|
----------------------------------------------------------------
| Machine: TP-Link TL-MR3220 v1
| Uptime: 0d, 00:10:59
| Load: 0.02 0.12 0.12
| Flash: total: 1.8GB, free: 1.7GB, used: 0%
| Memory: total: 28.5MB, free: 16.0MB, used: 43%
| WAN: 192.168.100.105, proto: dhcp
| LAN: 192.168.167.1
| WLAN: mode: ap, ssid: Gargoyle, channel: 11, conn: 0
----------------------------------------------------------------
root@TL-MR3220 v1:~# echo "src/gz gargoylepl_plugins http://dl.eko.one.pl/gargoy
le-pl/attitude_adjustment/ar71xx/plugins" >> /etc/opkg.conf
root@TL-MR3220 v1:~# opkg update
Downloading package list for attitude_adjustment source...
Package list for attitude_adjustment downloaded successfully.
Downloading package list for eko1 source...
Package list for eko1 downloaded successfully.
Downloading package list for gargoylepl_plugins source...
Package list for gargoylepl_plugins downloaded successfully.
Downloading package list for gargoylepl_packages source...
Package list for gargoylepl_packages downloaded successfully.
root@TL-MR3220 v1:~# opkg install opkg
Preparing to install the following packages, which will require 57027 bytes:
opkg
Preparing to install package opkg...
Downloading...
Downloaded opkg successfully.
Installing opkg...
Successfully installed opkg.
Installation of packages successful.
root@TL-MR3220 v1:~# opkg remove haserl
Removing package haserl from root...
root@TL-MR3220 v1:~# opkg install haserl-i18n
Installing haserl-i18n (0.9.26-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitu … x/plugins/ haserl-i18n_0.9.26-1_ar71xx.ipk.
Configuring haserl-i18n.
root@TL-MR3220 v1:~# opkg install --nodeps gargoyle-i18n
Installing gargoyle-i18n (0.2.1-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitu … x/plugins/ gargoyle-i18n_0.2.1-1_all.ipk.
Configuring gargoyle-i18n.
root@TL-MR3220 v1:~# opkg install plugin-gargoyle-i18n-English-EN
Installing plugin-gargoyle-i18n-English-EN (1.0.0-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitu … x/plugins/ plugin-gargoyle-i18n-English-EN_1.0.0-1_all.ipk.
Configuring plugin-gargoyle-i18n-English-EN.
//usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst: exit: line 129: Il legal number: -1
Collected errors:
* pkg_run_script: package "plugin-gargoyle-i18n-English-EN" postinst script ret urned status 2.
* opkg_configure: plugin-gargoyle-i18n-English-EN.postinst returned 2.
root@TL-MR3220 v1:~# opkg install plugin-gargoyle-i18n-Polish-PL
Installing plugin-gargoyle-i18n-Polish-PL (1.0.0-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitu … x/plugins/ plugin-gargoyle-i18n-Polish-PL_1.0.0-1_all.ipk.
Configuring plugin-gargoyle-i18n-Polish-PL.
uci: Entry not found
uci: Entry not found
//usr/lib/opkg/info/plugin-gargoyle-i18n-Polish-PL.postinst: exit: line 129: Ill egal number: -1
Configuring plugin-gargoyle-i18n-English-EN.
//usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst: exit: line 129: Il legal number: -1
Collected errors:
* pkg_run_script: package "plugin-gargoyle-i18n-Polish-PL" postinst script retu rned status 2.
* opkg_configure: plugin-gargoyle-i18n-Polish-PL.postinst returned 2.
* pkg_run_script: package "plugin-gargoyle-i18n-English-EN" postinst script ret urned status 2.
* opkg_configure: plugin-gargoyle-i18n-English-EN.postinst returned 2.
root@TL-MR3220 v1:~# opkg install --force-reinstall gargoyle
Removing package gargoyle from root...
Installing gargoyle (1.6.0.5-6) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitu … x/plugins/ gargoyle_1.6.0.5-6_ar71xx.ipk.
Configuring gargoyle.
Configuring plugin-gargoyle-i18n-Polish-PL.
uci: Entry not found
uci: Entry not found
//usr/lib/opkg/info/plugin-gargoyle-i18n-Polish-PL.postinst: exit: line 129: Ill egal number: -1
Configuring plugin-gargoyle-i18n-English-EN.
//usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst: exit: line 129: Il legal number: -1
Collected errors:
* pkg_run_script: package "plugin-gargoyle-i18n-Polish-PL" postinst script retu rned status 2.
* opkg_configure: plugin-gargoyle-i18n-Polish-PL.postinst returned 2.
* pkg_run_script: package "plugin-gargoyle-i18n-English-EN" postinst script ret urned status 2.
* opkg_configure: plugin-gargoyle-i18n-English-EN.postinst returned 2.
root@TL-MR3220 v1:~# opkg install --force-reinstall ddns-gargoyle
Removing package ddns-gargoyle from root...
Installing ddns-gargoyle (1.6.0.5-1) to root...
Configuring plugin-gargoyle-i18n-Polish-PL.
//usr/lib/opkg/info/plugin-gargoyle-i18n-Polish-PL.postinst: exit: line 129: Ill egal number: -1
Configuring plugin-gargoyle-i18n-English-EN.
//usr/lib/opkg/info/plugin-gargoyle-i18n-English-EN.postinst: exit: line 129: Il legal number: -1
Collected errors:
* opkg_download_pkg: Package ddns-gargoyle is not available from any configured src.
* opkg_install_pkg: Failed to download ddns-gargoyle. Perhaps you need to run ' opkg update'?
* opkg_install_cmd: Cannot install package ddns-gargoyle.
* pkg_run_script: package "plugin-gargoyle-i18n-Polish-PL" postinst script retu rned status 2.
* opkg_configure: plugin-gargoyle-i18n-Polish-PL.postinst returned 2.
* pkg_run_script: package "plugin-gargoyle-i18n-English-EN" postinst script ret urned status 2.
* opkg_configure: plugin-gargoyle-i18n-English-EN.postinst returned 2.
Języki trzeba teraz uzupełnić, zmodyfikowałem poradnik
Pokusiłem się o update do 1.6.0.5. Na nowo utworzyłem exroot'a wg
http://eko.one.pl/forum/viewtopic.php?pid=21214#p21214
a następnie instalację pluginów jak w tym poscie i niestety mam problem bo gui nie widzi montowanych nośników USB.
BLKID:
root@Gargoyle:~# blkid
/dev/mtdblock2: TYPE="squashfs"
/dev/sda1: UUID="7bb59496-3e9b-44f4-abfd-ec38322ea384" TYPE="ext2"
/dev/sdb1: LABEL="PRZYJAZNY P" UUID="CC63-4B1B" TYPE="vfat"GUI:
"Nie wykryto żadnego zamontowanego nośnika USB"Log:
Apr 25 21:28:07 Gargoyle kern.info kernel: [ 1799.110000] usb 1-1.6: new high-speed USB device number 5 using ehci-platform
Apr 25 21:28:07 Gargoyle kern.info kernel: [ 1799.220000] scsi2 : usb-storage 1-1.6:1.0
Apr 25 21:28:07 Gargoyle user.notice usb-modeswitch: 1-1.6:1.0: Manufacturer=Kingston Product=DataTraveler_2.0 Serial=5B731C9F662B
Apr 25 21:28:08 Gargoyle kern.notice kernel: [ 1800.230000] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
Apr 25 21:28:09 Gargoyle kern.notice kernel: [ 1800.810000] sd 2:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
Apr 25 21:28:09 Gargoyle kern.notice kernel: [ 1800.820000] sd 2:0:0:0: [sdb] Write Protect is off
Apr 25 21:28:09 Gargoyle kern.debug kernel: [ 1800.820000] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
Apr 25 21:28:09 Gargoyle kern.err kernel: [ 1800.830000] sd 2:0:0:0: [sdb] No Caching mode page present
Apr 25 21:28:09 Gargoyle kern.err kernel: [ 1800.830000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Apr 25 21:28:09 Gargoyle kern.err kernel: [ 1800.840000] sd 2:0:0:0: [sdb] No Caching mode page present
Apr 25 21:28:09 Gargoyle kern.err kernel: [ 1800.850000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Apr 25 21:28:09 Gargoyle kern.info kernel: [ 1800.860000] sdb: sdb1
Apr 25 21:28:09 Gargoyle kern.err kernel: [ 1800.860000] sd 2:0:0:0: [sdb] No Caching mode page present
Apr 25 21:28:09 Gargoyle kern.err kernel: [ 1800.870000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Apr 25 21:28:09 Gargoyle kern.notice kernel: [ 1800.880000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Apr 25 21:28:11 Gargoyle user.notice fstab: NTFS signature is missing.
Apr 25 21:28:11 Gargoyle user.notice fstab: Failed to mount '/dev/sdb1': Invalid argument
Apr 25 21:28:11 Gargoyle user.notice fstab: The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Apr 25 21:28:11 Gargoyle user.notice fstab: Maybe the wrong device is used? Or the whole disk instead of a
Apr 25 21:28:11 Gargoyle user.notice fstab: partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Apr 25 21:28:11 Gargoyle kern.warn kernel: [ 1802.980000] busybox: sending ioctl 5310 to a partition!
Apr 25 21:28:11 Gargoyle kern.warn kernel: [ 1802.980000] busybox: sending ioctl 5310 to a partition!Czy podczas instalacji niektóre pliki pobrane z innego repozytorium mogły namieszać?:
Configuring share-users.
root@Gargoyle:~# opkg install vsftpd
Installing vsftpd (3.0.2-2) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/plugins/vsftpd_3.0.2-2_ar71xx.ipk.
Configuring vsftpd.
root@Gargoyle:~# opkg install samba36-server
Installing samba36-server (3.6.5-3) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/plugins/samba36-server_3.6.5-3_ar71xx.ipk.
Configuring samba36-server.
root@Gargoyle:~# opkg install nfs-kernel-server
Installing nfs-kernel-server (1.2.6-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/plugins/nfs-kernel-server_1.2.6-1_ar71xx.ipk.
Multiple packages (kmod-fs-nfsd and kmod-fs-nfsd) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfsd and kmod-fs-nfsd) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfs-common and kmod-fs-nfs-common) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfs-common and kmod-fs-nfs-common) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-exportfs and kmod-fs-exportfs) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-exportfs and kmod-fs-exportfs) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfs and kmod-fs-nfs) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfs and kmod-fs-nfs) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfs-common and kmod-fs-nfs-common) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-nfs-common and kmod-fs-nfs-common) providing same name marked HOLD or PREFER. Using latest.
Installing libwrap (7.6-1) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/libwrap_7.6-1_ar71xx.ipk.
Installing libblkid (2.21.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/libblkid_2.21.2-1_ar71xx.ipk.
Installing libuuid (2.21.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/libuuid_2.21.2-1_ar71xx.ipk.
Installing librpc (0.9.32-rc2-0a2179bbc0844928f2a0ec01dba93d9b5d6d41a7) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/librpc_0.9.32-rc2-0a2179bbc0844928f2a0ec01dba93d9b5d6d41a7_ar71xx.ipk.
Installing kmod-fs-nfsd (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-nfsd_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-fs-nfs-common (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-nfs-common_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-fs-exportfs (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-exportfs_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-fs-nfs (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-nfs_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing portmap (6.0-3) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/portmap_6.0-3_ar71xx.ipk.
Configuring kmod-fs-nfs-common.
Configuring kmod-fs-exportfs.
Configuring kmod-fs-nfsd.
Configuring libuuid.
Configuring libblkid.
Configuring libwrap.
Configuring librpc.
Configuring portmap.
Configuring kmod-fs-nfs.
Configuring nfs-kernel-server.
root@Gargoyle:~# opkg install nfs-kernel-server-utils
Installing nfs-kernel-server-utils (1.2.6-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/plugins/nfs-kernel-server-utils_1.2.6-1_ar71xx.ipk.
Configuring nfs-kernel-server-utils.
root@Gargoyle:~# opkg install disktype
Installing disktype (9-2) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/plugins/disktype_9-2_ar71xx.ipk.
Configuring disktype.
root@Gargoyle:~# /etc/init.d/vsftpd enable
root@Gargoyle:~# /etc/init.d/samba enable
root@Gargoyle:~# /etc/init.d/portmap enable
root@Gargoyle:~# /etc/init.d/nfsd enable
root@Gargoyle:~# rm -f /sbin/blkid
root@Gargoyle:~# rm -f /lib/modules/3.3.8/sierra.ko
root@Gargoyle:~# rm -f /sbin/swapoff
root@Gargoyle:~# rm -f /sbin/swapon
root@Gargoyle:~# opkg install plugin-gargoyle-usb-storage
Installing plugin-gargoyle-usb-storage (1.6.0.5-1) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/plugins/plugin-gargoyle-usb-storage_1.6.0.5-1_all.ipk.
Multiple packages (kmod-usb-acm and kmod-usb-acm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-option and kmod-usb-serial-option) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-qualcomm and kmod-usb-serial-qualcomm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-qualcomm and kmod-usb-serial-qualcomm) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-wwan and kmod-usb-serial-wwan) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial-sierrawireless and kmod-usb-serial-sierrawireless) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-serial and kmod-usb-serial) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-net and kmod-usb-net) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-storage and kmod-usb-storage) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-storage-extras and kmod-usb-storage-extras) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-storage-extras and kmod-usb-storage-extras) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-usb-storage and kmod-usb-storage) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-ext4 and kmod-fs-ext4) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-msdos and kmod-fs-msdos) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-msdos and kmod-fs-msdos) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-vfat and kmod-fs-vfat) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-vfat and kmod-fs-vfat) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-hfsplus and kmod-fs-hfsplus) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fs-hfsplus and kmod-fs-hfsplus) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-utf8 and kmod-nls-utf8) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-utf8 and kmod-nls-utf8) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp1250 and kmod-nls-cp1250) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp1250 and kmod-nls-cp1250) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp1251 and kmod-nls-cp1251) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp1251 and kmod-nls-cp1251) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp437 and kmod-nls-cp437) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp437 and kmod-nls-cp437) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp775 and kmod-nls-cp775) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp775 and kmod-nls-cp775) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp850 and kmod-nls-cp850) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp850 and kmod-nls-cp850) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp852 and kmod-nls-cp852) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp852 and kmod-nls-cp852) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp866 and kmod-nls-cp866) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-cp866 and kmod-nls-cp866) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-1 and kmod-nls-iso8859-1) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-1 and kmod-nls-iso8859-1) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-13 and kmod-nls-iso8859-13) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-13 and kmod-nls-iso8859-13) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-15 and kmod-nls-iso8859-15) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-15 and kmod-nls-iso8859-15) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-2 and kmod-nls-iso8859-2) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-iso8859-2 and kmod-nls-iso8859-2) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-koi8r and kmod-nls-koi8r) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-koi8r and kmod-nls-koi8r) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-base and kmod-nls-base) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-utf8 and kmod-nls-utf8) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-nls-utf8 and kmod-nls-utf8) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fuse and kmod-fuse) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fuse and kmod-fuse) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fuse and kmod-fuse) providing same name marked HOLD or PREFER. Using latest.
Multiple packages (kmod-fuse and kmod-fuse) providing same name marked HOLD or PREFER. Using latest.
Installing fdisk (2.21.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/fdisk_2.21.2-1_ar71xx.ipk.
Installing blkid (2.21.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/blkid_2.21.2-1_ar71xx.ipk.
Installing dosfsck (3.0.12-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/dosfsck_3.0.12-1_ar71xx.ipk.
Installing kmod-usb-serial-qualcomm (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-usb-serial-qualcomm_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-usb-sierrawireless-directip (3.3.8-10-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-usb-sierrawireless-directip_3.3.8-10-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing e2fsprogs (1.42.4-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/e2fsprogs_1.42.4-1_ar71xx.ipk.
Installing libext2fs (1.42.4-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/libext2fs_1.42.4-1_ar71xx.ipk.
Installing libcom_err (1.42.4-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/libcom_err_1.42.4-1_ar71xx.ipk.
Installing libpthread (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/libpthread_0.9.33.2-1_ar71xx.ipk.
Installing kmod-usb-storage-extras (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-usb-storage-extras_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing swap-utils (2.21.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/swap-utils_2.21.2-1_ar71xx.ipk.
Installing nfs-utils (1.2.6-1) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/nfs-utils_1.2.6-1_ar71xx.ipk.
Installing libevent (1.4.14b-2) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/libevent_1.4.14b-2_ar71xx.ipk.
Installing librt (0.9.33.2-1) to root...
Downloading http://dl.eko.one.pl/attitude_adjustment/ar71xx/packages/librt_0.9.33.2-1_ar71xx.ipk.
Installing badblocks (1.42.4-1) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/badblocks_1.42.4-1_ar71xx.ipk.
Installing kmod-fs-msdos (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-msdos_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-fs-vfat (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-vfat_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-fs-hfsplus (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fs-hfsplus_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-utf8 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-utf8_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp1250 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp1250_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp1251 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp1251_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp437 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp437_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp775 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp775_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp850 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp850_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp852 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp852_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-cp866 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-cp866_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-iso8859-1 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-iso8859-1_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-iso8859-13 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-iso8859-13_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-iso8859-15 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-iso8859-15_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-iso8859-2 (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-iso8859-2_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-nls-koi8r (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-nls-koi8r_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing kmod-fuse (3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844) to root...
Downloading http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/packages/kmod-fuse_3.3.8-1-3b70fc7d412617eb97c6bdc7d8fb7844_ar71xx.ipk.
Installing ntfs-3g (2011.4.12-1-fuseint) to root...
Downloading http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages/ntfs-3g_2011.4.12-1-fuseint_ar71xx.ipk.
Configuring libpthread.
Configuring libcom_err.
Configuring kmod-nls-utf8.
Configuring kmod-fs-hfsplus.
Configuring kmod-fs-msdos.
Configuring kmod-usb-serial-qualcomm.
Configuring kmod-nls-cp1250.
Configuring kmod-nls-cp1251.
Configuring kmod-fs-vfat.
Configuring dosfsck.
Configuring librt.
Configuring libevent.
Configuring nfs-utils.
Configuring kmod-nls-cp437.
Configuring fdisk.
Configuring blkid.
Configuring kmod-usb-sierrawireless-directip.
Configuring libext2fs.
Configuring e2fsprogs.
Configuring kmod-usb-storage-extras.
Configuring swap-utils.
Configuring badblocks.
Configuring kmod-nls-cp775.
Configuring kmod-nls-cp850.
Configuring kmod-nls-cp852.
Configuring kmod-nls-cp866.
Configuring kmod-nls-iso8859-1.
Configuring kmod-nls-iso8859-13.
Configuring kmod-nls-iso8859-15.
Configuring kmod-nls-iso8859-2.
Configuring kmod-nls-koi8r.
Configuring kmod-fuse.
Configuring ntfs-3g.
Create '/etc/filesystems'.
Add 'ntfs-3g' to known filesystems.
Configuring plugin-gargoyle-usb-storage.
root@Gargoyle:~# /etc/init.d/usb_storage startwynik polecenia mount pokaż.
mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14616k)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/sda1 on /overlay type ext2 (rw,noatime,user_xattr,barrier=1)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
/dev/sdb1 on /mnt/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)Więc nie, nie zrobiłeś dokładnie tak jak jest napisane w poradnikach. To czego nie zrobiłeś to wyłączenie w fstabie żeby sam montował nośniki. Teraz fstab zamontował nośnik, więc plugin go nie widzi. Albo fstab albo plugin gargoyle. http://eko.one.pl/?p=gargoyle-fstab#int … racjarczna polecam uwadze.
Oczywiście masz rację. Dzięki.
jakiś pomysł co to może być ?
Jul 17 20:32:14 Gargoyle kern.info kernel: [34897.550000] usb 1-1.1: USB disconnect, device number 6
Jul 17 20:32:14 Gargoyle kern.info kernel: [34897.560000] scsi 4:0:0:0: [sdd] killing request
Jul 17 20:32:14 Gargoyle kern.info kernel: [34897.560000] scsi 4:0:0:0: [sdd] Unhandled error code
Jul 17 20:32:14 Gargoyle kern.info kernel: [34897.570000] scsi 4:0:0:0: [sdd] Result: hostbyte=0x01 driverbyte=0x00
Jul 17 20:32:14 Gargoyle kern.info kernel: [34897.570000] scsi 4:0:0:0: [sdd] CDB: cdb[0]=0x28: 28 00 00 01 29 08 00 00 08 00
Jul 17 20:32:14 Gargoyle kern.err kernel: [34897.580000] end_request: I/O error, dev sdd, sector 76040
Jul 17 20:32:14 Gargoyle kern.crit kernel: [34897.590000] EXT4-fs error (device sdd1): ext4_find_entry:935: inode #2: comm smbd: reading directory lblock 0
Jul 17 20:32:14 Gargoyle kern.alert kernel: [34898.210000] Write-error on swap-device (8:0:16)
Jul 17 20:32:15 Gargoyle kern.alert kernel: [34898.610000] Write-error on swap-device (8:0:24)wynik df -h
Filesystem Size Used Available Use% Mounted on
rootfs 1.9G 16.3M 1.9G 1% /
/dev/root 2.8M 2.8M 0 100% /rom
tmpfs 14.3M 540.0K 13.7M 4% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/sdb1 1.9G 16.3M 1.9G 1% /overlay
overlayfs:/overlay 1.9G 16.3M 1.9G 1% /
/dev/sdd1 418.7G 14.9G 382.9G 4% /tmp/usb_mount/40b9f49c-9972-4044-b0c3-19447d80ae63Usb ci rozłączyło. Albo hub do kitu, albo gniazda luźne, albo ten dysk kompletnie się do niczego nie nadaje. Lub po prostu brakuje mu zasilania
sporo tych albo... ;-)
jeśli dysk nie ma możliwości podłączenia dodatkowego zasilania to da coś podłączenie do huba drugiego huba z zasilaczem i do niego wpięcie tylko dysku a na tym pierwszym zostawienie samego modemu (E398) i pendriva na extroota ?
I tego pierwszego nie masz z własnym zasilaniem? Chcesz powiedzieć że masz hub pasywny z E398 i jeszcze dyskiem?
pierwszy ma oczywiście zasilanie - tylko skoro E398 jest prądożerne to pomyślałem o drugim zasilaczu
Strony Poprzednia 1 2 3 4 5 6 7 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → Instalacja pluginów dla routerów z 4MB flash i USB
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc