Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → TL-WR1043ND brak internetu, problem z dostepem do konfiguracji
Strony Poprzednia 1 2 3 4 5 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
sprawdziłem na lapku przez kabel to samo, zastosowałem też inny kabel i nadal max 300kb/s, sprawdziłem jeszcze transfer na lapa@wifi w tym samy pomieszczeniu co router osiągam nawet 6mb/s czyli dysk ok problem tkwi w samym lanie, ale z drugiej strony mam łacze 6mb i pliki z ftp (internet) ściągam bez problemu z prędkością 600-700kb/s (transmission zainstalowany na routerze też takie wartości bez problemu osiąga)
To sprawdź ustawienia karty sieciowej w komputerze. Czy nie masz wymuszonego jakiegoś trybu pracy.
zarówno na lapie jak i stacjonarnym "szybkość i dupleks auto negocjacja", w połączeniu sieciowym pokazuje prędkość 1gb, przy pingowaniu routera nie gubi pakietów, także połączenie jest ok
To teraz zrób zwykły test wydajności iperfem i zobacz. A może switch w ruterze masz poprzestawiany 
chętnie bym sprawdził prędkość jak bym mógł dostać tego iprefa dla openwrt
przecież jest w paczkach w repo...
mój bład zrobiłem literówkę przy instalacji i nie miało co pobrać
root@OpenWrt:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.1.1 port 5001 connected with 192.168.1.197 port 58811
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.1 sec 11.0 MBytes 9.21 Mbits/sec
w drugą stronę
root@OpenWrt:~# iperf -c 192.168.1.197
------------------------------------------------------------
Client connecting to 192.168.1.197, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.1.1 port 47951 connected with 192.168.1.197 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.4 sec 1.74 MBytes 1.41 Mbits/sec
a po wifi wyglada to tak (sygnał średni w innym pokoju siedzę)
root@OpenWrt:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.1.1 port 5001 connected with 192.168.1.226 port 1045
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 29.7 MBytes 24.8 Mbits/sec
i jeszcze miedzy -komp-ruter-komp- transfer 46.2mb
bandwidth 38.7Mbits/sec
dobranoc
ps.kompletne dane wyślij na email
Ciekawe masz te transfery. Nadal bym stawiał na padnięty port/kartę sieciową kabel.
transfer na laptopie po kablu (oryginalny kabel fabryczny podłączony pod inne gniazdo w routerze)
root@OpenWrt:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.1.1 port 5001 connected with 192.168.1.200 port 3904
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.9 sec 9.05 MBytes 6.94 Mbits/sec
może to pomoże
root@OpenWrt:~# dmesg
Linux version 2.6.32.10 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #1 Tue Jul 27 23:31:18 CEST 2010
prom: fw_arg0=00000007, fw_arg1=a1f77fb0, fw_arg2=a1f78440, fw_arg3=00000008
MyLoader: sysp=ff00ff80, boardp=ff00df00, parts=ff00df00
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00002000
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat 802cc490, node_mem_map 81000000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29332k/32768k available (2088k kernel code, 3436k reserved, 395k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
yaffs Jul 27 2010 23:27:48 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
spi0.0: searching for MyLoader partition table at offset 0x10000
spi0.0: searching for MyLoader partition table at offset 0x20000
spi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=390000, len=460000
0x000000390000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.2
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
gpio-buttons driver version 0.1.2
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access WDC WD32 00BEVT-22ZCT0 PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1a000000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2010-07-13-3-g1a05138
Backport based on wireless-2.6.git v2.6.35-rc5-47599-ge69e378
cfg80211: Calling CRDA to update world regulatory domain
phy0: Selected rate control algorithm 'minstrel_ht'
phy0: Atheros AR9100 MAC/BB Rev:0 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (460 buckets, 1840 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
fuse init (API version 7.13)
Adding 96348k swap on /dev/sda1. Priority:-1 extents:1 across:96348k
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ar71xx-wdt: enabling watchdog timer
logread
168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:45 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168. 1.200 00:21:85:4e:0f:ce ptys-56aa9f3e
Aug 2 19:08:49 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192. 168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:49 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168. 1.200 00:21:85:4e:0f:ce ptys-56aa9f3e
Aug 2 19:08:52 OpenWrt daemon.info transmission-daemon: Port Forwarding State c hanged from "Not forwarded" to "Starting" (port-forwarding.c:87)
Aug 2 19:08:57 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192. 168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:57 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168. 1.200 00:21:85:4e:0f:ce ptys-56aa9f3e
Aug 2 19:09:12 OpenWrt daemon.info transmission-daemon: Searching for web inter face file "//.local/share/transmission/web/javascript/transmission.js" (platform .c:524)
Aug 2 19:09:13 OpenWrt daemon.info transmission-daemon: Searching for web inter face file "/usr/share/transmission/web/javascript/transmission.js" (platform.c:5 24)
Aug 2 19:09:14 OpenWrt daemon.info transmission-daemon: DHT Attempting bootstra p from dht.transmissionbt.com (tr-dht.c:234)
Aug 2 19:09:17 OpenWrt daemon.info transmission-daemon: Port Forwarding State c hanged from "Starting" to "???" (port-forwarding.c:87)
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPDISCOVER(br-lan) 00: 16:b6:5f:3e:30
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPOFFER(br-lan) 192.16 8.1.126 00:16:b6:5f:3e:30
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192. 168.1.126 00:16:b6:5f:3e:30
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168. 1.126 00:16:b6:5f:3e:30 LinksysPAP
Aug 2 19:09:41 OpenWrt authpriv.info dropbear[1320]: Child connection from 192. 168.1.200:3859
Aug 2 19:09:46 OpenWrt authpriv.notice dropbear[1320]: password auth succeeded for 'root' from 192.168.1.200:3859
Aug 2 19:10:44 OpenWrt authpriv.info dropbear[1320]: exit after auth (root): Ex ited normally
Aug 2 19:11:41 OpenWrt authpriv.info dropbear[1327]: Child connection from 192. 168.1.200:3902
Aug 2 19:11:45 OpenWrt authpriv.notice dropbear[1327]: password auth succeeded for 'root' from 192.168.1.200:3902
Aug 2 19:14:37 OpenWrt authpriv.info dropbear[1327]: exit after auth (root): Ex ited normally
Aug 2 19:14:46 OpenWrt authpriv.info dropbear[1334]: Child connection from 192. 168.1.200:3909
Aug 2 19:14:50 OpenWrt authpriv.notice dropbear[1334]: password auth succeeded for 'root' from 192.168.1.200:3909
Aug 2 19:17:53 OpenWrt authpriv.info dropbear[1334]: exit after auth (root): Ex ited normally
Aug 2 19:18:04 OpenWrt authpriv.info dropbear[1342]: Child connection from 192. 168.1.200:3924
Aug 2 19:18:08 OpenWrt authpriv.notice dropbear[1342]: password auth succeeded for 'root' from 192.168.1.200:3924
root@OpenWrt:~# logread
Jan 1 01:00:30 OpenWrt user.info kernel: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:30 OpenWrt user.info kernel: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 01:00:30 OpenWrt user.warn kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan 1 01:00:30 OpenWrt user.warn kernel: Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 01:00:30 OpenWrt user.info kernel: Writing ErrCtl register=00000000
Jan 1 01:00:30 OpenWrt user.info kernel: Readback ErrCtl register=00000000
Jan 1 01:00:30 OpenWrt user.info kernel: Memory: 29332k/32768k available (2088k kernel code, 3436k reserved, 395k data, 152k init, 0k highmem)
Jan 1 01:00:30 OpenWrt user.info kernel: SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan 1 01:00:30 OpenWrt user.info kernel: Hierarchical RCU implementation.
Jan 1 01:00:30 OpenWrt user.info kernel: NR_IRQS:56
Jan 1 01:00:30 OpenWrt user.info kernel: Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Jan 1 01:00:30 OpenWrt user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:30 OpenWrt user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:30 OpenWrt user.notice kernel: MIPS: machine is TP-LINK TL-WR1043ND
Jan 1 01:00:30 OpenWrt user.warn kernel: bio: create slab <bio-0> at 0
Jan 1 01:00:30 OpenWrt user.info kernel: Switching to clocksource MIPS
Jan 1 01:00:30 OpenWrt user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:30 OpenWrt user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:30 OpenWrt user.info kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan 1 01:00:30 OpenWrt user.info kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:30 OpenWrt user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)
Jan 1 01:00:30 OpenWrt user.info kernel: TCP reno registered
Jan 1 01:00:30 OpenWrt user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:30 OpenWrt user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 01:00:30 OpenWrt user.warn kernel: Registering mini_fo version $Id$
Jan 1 01:00:30 OpenWrt user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
Jan 1 01:00:30 OpenWrt user.warn kernel: yaffs Jul 27 2010 23:27:48 Installing.
Jan 1 01:00:30 OpenWrt user.info kernel: msgmni has been set to 57
Jan 1 01:00:30 OpenWrt user.info kernel: io scheduler noop registered
Jan 1 01:00:30 OpenWrt user.info kernel: io scheduler deadline registered (default)
Jan 1 01:00:30 OpenWrt user.info kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 01:00:30 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan 1 01:00:30 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:30 OpenWrt user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 2
Jan 1 01:00:30 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:30 OpenWrt user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:30 OpenWrt user.debug kernel: usb-storage: device found at 2
Jan 1 01:00:30 OpenWrt user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 01:00:30 OpenWrt user.notice kernel: scsi 0:0:0:0: Direct-Access WDC WD32 00BEVT-22ZCT0 PQ: 0 ANSI: 2
Jan 1 01:00:30 OpenWrt user.debug kernel: usb-storage: device scan complete
Jan 1 01:00:30 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Jan 1 01:00:30 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:30 OpenWrt user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
Jan 1 01:00:30 OpenWrt user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:30 OpenWrt user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:30 OpenWrt user.info kernel: sda: sda1 sda2
Jan 1 01:00:30 OpenWrt user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:30 OpenWrt user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 1 01:00:30 OpenWrt user.info kernel: kjournald starting. Commit interval 5 seconds
Jan 1 01:00:30 OpenWrt user.info kernel: EXT3 FS on sda2, internal journal
Jan 1 01:00:30 OpenWrt user.info kernel: EXT3-fs: mounted filesystem with writeback data mode.
Jan 1 01:00:30 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 01:00:30 OpenWrt user.info kernel: mini_fo: using storage directory: /overlay
Jan 1 01:00:30 OpenWrt user.info kernel: eth0: link down
Jan 1 01:00:31 OpenWrt user.debug kernel: ar71xx: pll_reg 0xb8050014: 0x1a000000
Jan 1 01:00:31 OpenWrt user.info kernel: eth0: link up (1000Mbps/Full duplex)
Jan 1 01:00:31 OpenWrt user.info kernel: device eth0.1 entered promiscuous mode
Jan 1 01:00:31 OpenWrt user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:31 OpenWrt user.info kernel: br-lan: port 1(eth0.1) entering forwarding state
Jan 1 01:00:31 OpenWrt user.info kernel: Compat-wireless backport release: compat-wireless-2010-07-13-3-g1a05138
Jan 1 01:00:31 OpenWrt user.info kernel: Backport based on wireless-2.6.git v2.6.35-rc5-47599-ge69e378
Jan 1 01:00:32 OpenWrt user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
Jan 1 01:00:32 OpenWrt user.info sysinit: 0.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:32 OpenWrt user.info sysinit: 1.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:32 OpenWrt user.info sysinit: 2.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:32 OpenWrt user.info sysinit: 3.openwrt.pool.ntp.org: Unknown host
Jan 1 01:00:34 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 01:00:34 OpenWrt user.info kernel: phy0: Atheros AR9100 MAC/BB Rev:0 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan 1 01:00:35 OpenWrt user.info kernel: cfg80211: World regulatory domain updated:
Jan 1 01:00:35 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:35 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:35 OpenWrt user.info kernel: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:35 OpenWrt user.info kernel: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:35 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:35 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 01:00:35 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:36 OpenWrt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 01:00:36 OpenWrt user.info kernel: NET: Registered protocol family 24
Jan 1 01:00:36 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (460 buckets, 1840 max)
Jan 1 01:00:36 OpenWrt user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jan 1 01:00:36 OpenWrt user.warn kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jan 1 01:00:36 OpenWrt user.warn kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 1 01:00:37 OpenWrt user.info kernel: fuse init (API version 7.13)
Jan 1 01:00:37 OpenWrt user.info kernel: Adding 96348k swap on /dev/sda1. Priority:-1 extents:1 across:96348k
Jan 1 01:00:38 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: PL
Jan 1 01:00:38 OpenWrt user.info kernel: cfg80211: Regulatory domain changed to country: PL
Jan 1 01:00:38 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:00:38 OpenWrt user.info kernel: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:38 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:38 OpenWrt user.info kernel: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:00:38 OpenWrt user.info kernel: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 1 01:00:39 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Jan 1 01:00:39 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 1 01:00:40 OpenWrt user.notice root: starting ntpclient
Aug 2 19:08:36 OpenWrt user.notice rdate: Failed to sync with ptbtime3.ptb.de
Aug 2 19:08:36 OpenWrt user.notice rdate: Synced with ntp.itl.waw.pl
Aug 2 19:08:37 OpenWrt user.info kernel: device wlan0 left promiscuous mode
Aug 2 19:08:37 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering disabled state
Aug 2 19:08:37 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Aug 2 19:08:37 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Aug 2 19:08:37 OpenWrt user.info sysinit: Loading defaults
Aug 2 19:08:37 OpenWrt user.info sysinit: Loading synflood protection
Aug 2 19:08:37 OpenWrt user.info sysinit: Adding custom chains
Aug 2 19:08:38 OpenWrt user.info sysinit: Loading zones
Aug 2 19:08:38 OpenWrt user.info sysinit: Loading forwarding
Aug 2 19:08:38 OpenWrt user.info sysinit: Loading redirects
Aug 2 19:08:38 OpenWrt user.info sysinit: Loading rules
Aug 2 19:08:38 OpenWrt user.info sysinit: iptables v1.4.6: option `-j' requires an argument
Aug 2 19:08:38 OpenWrt user.info sysinit: Try `iptables -h' or 'iptables --help' for more information.
Aug 2 19:08:38 OpenWrt user.info sysinit: iptables v1.4.6: option `-j' requires an argument
Aug 2 19:08:38 OpenWrt user.info sysinit: Try `iptables -h' or 'iptables --help' for more information.
Aug 2 19:08:38 OpenWrt user.info sysinit: iptables v1.4.6: option `-j' requires an argument
Aug 2 19:08:38 OpenWrt user.info sysinit: Try `iptables -h' or 'iptables --help' for more information.
Aug 2 19:08:38 OpenWrt user.info sysinit: iptables v1.4.6: option `-j' requires an argument
Aug 2 19:08:38 OpenWrt user.info sysinit: Try `iptables -h' or 'iptables --help' for more information.
Aug 2 19:08:38 OpenWrt user.info sysinit: Loading includes
Aug 2 19:08:38 OpenWrt user.info sysinit: Loading zone defaults
Aug 2 19:08:38 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan
Aug 2 19:08:39 OpenWrt user.notice root: adding wan (eth0.2) to firewall zone wan
Aug 2 19:08:39 OpenWrt authpriv.info dropbear[1244]: Running in background
Aug 2 19:08:40 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: started, version 2.55 cachesize 150
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: using local addresses only for domain lan
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: reading /tmp/resolv.conf.auto
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: using nameserver 62.21.99.95#53
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: using local addresses only for domain lan
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq[1271]: read /etc/hosts - 1 addresses
Aug 2 19:08:43 OpenWrt daemon.info dnsmasq-dhcp[1271]: read /etc/ethers - 0 addresses
Aug 2 19:08:43 OpenWrt user.info sysinit: setting up led WLAN
Aug 2 19:08:43 OpenWrt user.debug kernel: ar71xx-wdt: enabling watchdog timer
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: Transmission 1.92 (10363) started (session.c:612)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:772)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: RPC Server Adding address to whitelist: 192.168.1.* (rpc-server.c:772)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: RPC Server Serving RPC and Web requests on port 9091 (rpc-server.c:945)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: RPC Server Whitelist enabled (rpc-server.c:949)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: DHT Generating new id (tr-dht.c:369)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: Using settings from "/dysk/torrent" (daemon.c:423)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: Saved "/dysk/torrent/settings.json" (bencode.c:1645)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:67)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:67)
Aug 2 19:08:45 OpenWrt daemon.info transmission-daemon: Loaded 3 torrents (session.c:1661)
Aug 2 19:08:45 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPDISCOVER(br-lan) 192.168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:45 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPOFFER(br-lan) 192.168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:45 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192.168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:45 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168.1.200 00:21:85:4e:0f:ce ptys-56aa9f3e
Aug 2 19:08:49 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192.168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:49 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168.1.200 00:21:85:4e:0f:ce ptys-56aa9f3e
Aug 2 19:08:52 OpenWrt daemon.info transmission-daemon: Port Forwarding State changed from "Not forwarded" to "Starting" (port-forwarding.c:87)
Aug 2 19:08:57 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192.168.1.200 00:21:85:4e:0f:ce
Aug 2 19:08:57 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168.1.200 00:21:85:4e:0f:ce ptys-56aa9f3e
Aug 2 19:09:12 OpenWrt daemon.info transmission-daemon: Searching for web interface file "//.local/share/transmission/web/javascript/transmission.js" (platform.c:524)
Aug 2 19:09:13 OpenWrt daemon.info transmission-daemon: Searching for web interface file "/usr/share/transmission/web/javascript/transmission.js" (platform.c:524)
Aug 2 19:09:14 OpenWrt daemon.info transmission-daemon: DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:234)
Aug 2 19:09:17 OpenWrt daemon.info transmission-daemon: Port Forwarding State changed from "Starting" to "???" (port-forwarding.c:87)
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPDISCOVER(br-lan) 00:16:b6:5f:3e:30
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPOFFER(br-lan) 192.168.1.126 00:16:b6:5f:3e:30
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPREQUEST(br-lan) 192.168.1.126 00:16:b6:5f:3e:30
Aug 2 19:09:20 OpenWrt daemon.info dnsmasq-dhcp[1271]: DHCPACK(br-lan) 192.168.1.126 00:16:b6:5f:3e:30 LinksysPAP
Aug 2 19:09:41 OpenWrt authpriv.info dropbear[1320]: Child connection from 192.168.1.200:3859
Aug 2 19:09:46 OpenWrt authpriv.notice dropbear[1320]: password auth succeeded for 'root' from 192.168.1.200:3859
Aug 2 19:10:44 OpenWrt authpriv.info dropbear[1320]: exit after auth (root): Exited normally
Aug 2 19:11:41 OpenWrt authpriv.info dropbear[1327]: Child connection from 192.168.1.200:3902
Aug 2 19:11:45 OpenWrt authpriv.notice dropbear[1327]: password auth succeeded for 'root' from 192.168.1.200:3902
Aug 2 19:14:37 OpenWrt authpriv.info dropbear[1327]: exit after auth (root): Exited normally
Aug 2 19:14:46 OpenWrt authpriv.info dropbear[1334]: Child connection from 192.168.1.200:3909
Aug 2 19:14:50 OpenWrt authpriv.notice dropbear[1334]: password auth succeeded for 'root' from 192.168.1.200:3909
Aug 2 19:17:53 OpenWrt authpriv.info dropbear[1334]: exit after auth (root): Exited normally
Aug 2 19:18:04 OpenWrt authpriv.info dropbear[1342]: Child connection from 192.168.1.200:3924
Aug 2 19:18:08 OpenWrt authpriv.notice dropbear[1342]: password auth succeeded for 'root' from 192.168.1.200:3924
root@OpenWrt:~# cat /etc/config/network
config 'interface' 'loopback'
option 'ifname' 'lo'
option 'proto' 'static'
option 'ipaddr' '127.0.0.1'
option 'netmask' '255.0.0.0'
config 'interface' 'lan'
option 'ifname' 'eth0.1'
option 'type' 'bridge'
option 'proto' 'static'
option 'ipaddr' '192.168.1.1'
option 'netmask' '255.255.255.0'
config 'interface' 'wan'
option 'ifname' 'eth0.2'
option 'proto' 'dhcp'
config 'switch'
option 'name' 'rtl8366rb'
option 'reset' '1'
option 'enable_vlan' '1'
config 'switch_vlan'
option 'device' 'rtl8366rb'
option 'vlan' '1'
option 'ports' '1 2 3 4 5t'
config 'switch_vlan'
option 'device' 'rtl8366rb'
option 'vlan' '2'
option 'ports' '0 5t'
dzisiejszy rekord po wifi
root@OpenWrt:~# iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.1.1 port 5001 connected with 192.168.1.226 port 1262
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.1 sec 37.9 MBytes 31.4 Mbits/sec
dodam na konieć że zrobiłem update sterów radia do najnowszych z twojej stronki, ale chyba to nie ma żadnego wpływu na lan, jak to jest że po wifi mam więcej jak po lan-ie, z drugiej strony transfer po lanie za pośrednictwem routera nie jest zły, tylko router-komp po lan-ie jakoś mizernie idzie
Napewno kopiujesz po ftp, nie po scp(fish)?
100% ftp, takim znowu durniem nie jestem
może spróbować update driverów https://dev.openwrt.org/changeset/21914 ??
To nie update, inaczej zrobione struktury. Ale - SOA#1 - u mnie działa.
Cezary co to to Soa daj bezpośredniego linka do instalacji, tak w ogóle masz jakąś wizję na rozwiązanie mojego problemu
http://www.i-slownik.pl/1,2271,soa.html
jajcarz ale ja naprawdę nie wiem jak to instalować wklep z łaski swojej jak to zrobić opkg install ............ czy w ogóle to może pomóc ??
No ale co chcesz instalować? Sterownik switcha odpowiada tylko za możliwość zabawy z vlanami. Kiedyś go nie było i cały switch (5 portów) była jednością. I też działało, z dobrą wydajnością jak jest teraz.
to co jest uwalone że u mnie nie działa jak należy, czy mogę wykonać testy iperf na dir-300 z ddwrt (mam takiego na staniu), najlepsze jest to że ściągając plik z internetu robię to szybciej niż z domowego ftp
Switch działa poprawnie. I u mnie i u innych, wielokrotnie to było testowane. Masz ten sam soft, więc odpowiedz sobie gdzie jest problem.
Tak, możesz to zrobić na dd-wrt, o ile znajdziesz wersję iperfa która pod dd-wrt zadziała.
czyli uszkodzony switch w tplinku 
czeka mnie gwarancja, ale z drugiej strony transfer komputer komputer przy pomocy routera jest chyba ok, więc nie switch to co ???
Cezary zajrzy do tego postu http://eko.one.pl/forum/viewtopic.php?id=728 też mam wgrana tą wersję openwrt
ja mam na ostatnim z 27.07 backfire, nówkę dysk ext2 i transfery po lanie na poziomie 400 kb/s, po wifi nawet 7mb/s. Nie wiem co jest grane. Wróciłem do ostatniego backfire Obsego z kwietnia. Na nim mam dobre transfery po lanie i wifi. z Tym jednak, że czasami wyrzuca mi po wifi.
Mira444 jak robiłeś downgrade z nowego firmware do tego z kwietnia to ustawiałeś wszystko od nowa czy zachowałeś opcje konfiguracyjne, zapodaj linka z tym obrazem z kwietnia, co do radia to zainstaluj ten sterownik http://ecco.selfip.net/tl-wr1043nd-luci … ar71xx.ipk u mnie w miarę działa i ładne transfery po nim (instalacja przez opkg install http://ecco.selfip.net/tl-wr1043nd-luci … ar71xx.ipk )
ja mam kopię plików conf. tylko najważniejszych i cały czas ich używam. Używam tego backfire http://openwrt.groov.pl/WR1043NDv1/ . Zrezygnowałem z Obsego i przeszedłem na Shibbiego, mniej wyrzuca mi wifi. Z kopiami configów uważaj, bo jeżeli zajdą duże zmiany w backfire to router Ci się nie podniesie.
Strony Poprzednia 1 2 3 4 5 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → TL-WR1043ND brak internetu, problem z dostepem do konfiguracji
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc