26 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

http://eko.one.pl/forum/viewtopic.php?pid=50461#p50461 ?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

27 Odpowiedź przez Kamil10p

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Po wpisaniu vi /usr/lib/cups/backend/usb
--------------------------------------------

DEBUG: list_devices
DEBUG: usb_find_busses=1
DEBUG: usb_find_devices=5

Zrobiłem chmod i odinstalowałem p910nd i dalej to samo...

28 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

Ale nie miałeś tego tam wpisywać... To program który się wykonuje. Zobacz ten wskazany post.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

29 Odpowiedź przez Kamil10p (edytowany przez Kamil10p 2012-10-10 19:56:00)

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Po wpisaniu /usr/lib/cups/backend/usb nadal to samo...
A po wpisaniu:
/usr/lib/cups/backend/parallel
--------------------------------------------

DEBUG: list_devices
DEBUG: usb_find_busses=1
DEBUG: usb_find_devices=6

30 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

Masz na forum osobę która bawiła się cupsem, więc po prostu spytaj się co i jak.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

31 Odpowiedź przez Kamil10p

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Narazie doszedłem do tego, że router widzi drukarke:
cat /proc/bus/usb/devices
--------------------------------------------


T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=77.63
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0715 Rev=94.07
S:  Manufacturer=Genesys
S:  Product=USB Reader
S:  SerialNumber=000000009407
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04e8 ProdID=3313 Rev= 1.00
S:  Manufacturer=Samsung Electronics Co., Ltd.
S:  Product=ML-1670 Series
S:  SerialNumber=Z6ENBKDB502711Y.
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=1250us
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0204 ProdID=6025 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=058f ProdID=6387 Rev= 1.04
S:  SerialNumber=12071808050868
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

32 Odpowiedź przez Kamil10p (edytowany przez Kamil10p 2012-10-11 18:18:24)

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Co do osoby, to wysłałem jej wiadomość na poczte ale nie odpisuje....
A to jest log systemowy z instalacji cupsa:
Sep  8 17:44:08 OpenWrt kern.debug kernel: [    0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
Sep  8 17:44:08 OpenWrt kern.debug kernel: [    0.570000] pci 0000:00:00.0: supports D1
Sep  8 17:44:08 OpenWrt kern.debug kernel: [    0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Sep  8 17:44:08 OpenWrt kern.info kernel: [   11.640000] hub 1-0:1.0: 1 port detected
Sep  8 17:44:08 OpenWrt kern.info kernel: [   11.720000] Initializing USB Mass Storage driver...
Sep  8 17:44:08 OpenWrt kern.info kernel: [   11.730000] usbcore: registered new interface driver usb-storage
Sep  8 17:44:08 OpenWrt kern.info kernel: [   11.730000] USB Mass Storage support registered.
Sep  8 17:44:08 OpenWrt kern.info kernel: [   11.980000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.130000] hub 1-1:1.0: USB hub found
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.130000] hub 1-1:1.0: 4 ports detected
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.420000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.540000] scsi0 : usb-storage 1-1.1:1.0
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.630000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.820000] usb 1-1.3: new full-speed USB device number 5 using ehci-platform
Sep  8 17:44:08 OpenWrt kern.info kernel: [   12.980000] usb 1-1.3: new high-speed USB device number 6 using ehci-platform
Sep  8 17:44:08 OpenWrt kern.info kernel: [   13.090000] scsi1 : usb-storage 1-1.3:1.0
Sep  8 17:44:08 OpenWrt kern.notice kernel: [   13.550000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9407 PQ: 0 ANSI: 0
Sep  8 17:44:08 OpenWrt kern.notice kernel: [   13.570000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Sep  8 17:44:08 OpenWrt kern.notice kernel: [   14.090000] scsi 1:0:0:0: Direct-Access     USB2.0   Flash Disk       2.00 PQ: 0 ANSI: 2
Sep  8 17:44:08 OpenWrt kern.notice kernel: [   14.100000] sd 1:0:0:0: [sdb] 516608 512-byte logical blocks: (264 MB/252 MiB)
Sep  8 17:44:08 OpenWrt kern.notice kernel: [   14.100000] sd 1:0:0:0: [sdb] Write Protect is off
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   14.110000] sd 1:0:0:0: [sdb] Mode Sense: 0b 00 00 08
Sep  8 17:44:08 OpenWrt kern.err kernel: [   14.110000] sd 1:0:0:0: [sdb] No Caching mode page present
Sep  8 17:44:08 OpenWrt kern.err kernel: [   14.120000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Sep  8 17:44:08 OpenWrt kern.err kernel: [   14.130000] sd 1:0:0:0: [sdb] No Caching mode page present
Sep  8 17:44:08 OpenWrt kern.err kernel: [   14.130000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Sep  8 17:44:08 OpenWrt kern.info kernel: [   14.140000]  sdb: sdb1
Sep  8 17:44:08 OpenWrt kern.err kernel: [   14.150000] sd 1:0:0:0: [sdb] No Caching mode page present
Sep  8 17:44:08 OpenWrt kern.err kernel: [   14.150000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Sep  8 17:44:08 OpenWrt kern.notice kernel: [   14.160000] sd 1:0:0:0: [sdb] Attached SCSI removable disk
Sep  8 17:44:08 OpenWrt kern.info kernel: [   32.400000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Sep  8 17:44:08 OpenWrt kern.info kernel: [   32.640000] eth0: link down
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.620000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.630000] Backport based on wireless-testing.git master-2012-09-07
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.640000] compat.git: wireless-testing.git
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.680000] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.680000] cfg80211: World regulatory domain updated:
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.690000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.690000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.700000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.710000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.720000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 17:44:08 OpenWrt kern.info kernel: [   34.730000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 17:44:08 OpenWrt kern.warn kernel: [   35.610000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.620000] ath: EEPROM regdomain: 0x0
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.620000] ath: EEPROM indicates default country code should be used
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.620000] ath: doing EEPROM country->regdmn map search
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.620000] ath: country maps to regdmn code: 0x3a
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.620000] ath: Country alpha2 being used: US
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.620000] ath: Regpair used: 0x3a
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.630000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sep  8 17:44:08 OpenWrt kern.debug kernel: [   35.630000] Registered led device: ath9k-phy0
Sep  8 17:44:08 OpenWrt kern.info kernel: [   35.630000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
Sep  8 17:44:08 OpenWrt kern.info kernel: [   35.640000] cfg80211: Calling CRDA for country: US
Sep  8 17:44:11 OpenWrt user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Sep  8 17:44:11 OpenWrt user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB2.0_Hub Serial=?
Sep  8 17:44:11 OpenWrt user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=Genesys Product=USB_Reader Serial=000000009407
Sep  8 17:44:11 OpenWrt user.notice usb-modeswitch: 1-1.2:1.0: Manufacturer=Samsung_Electronics_Co.,_Ltd. Product=ML-1670_Series Serial=Z6ENBKDB502711Y.
Sep  8 17:44:12 OpenWrt user.notice usb-modeswitch: 1-1.3:1.0: Manufacturer=? Product=? Serial=?
Sep  8 17:44:12 OpenWrt kern.info kernel: [   45.860000] device eth0 entered promiscuous mode
Sep  8 17:44:12 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Sep  8 17:44:12 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Sep  8 17:44:12 OpenWrt daemon.notice netifd: wan (909): udhcpc (v1.19.4) started
Sep  8 17:44:12 OpenWrt daemon.notice netifd: wan (909): Sending discover...
Sep  8 17:44:12 OpenWrt kern.info kernel: [   46.460000] eth0: link up (1000Mbps/Full duplex)
Sep  8 17:44:12 OpenWrt kern.info kernel: [   46.460000] br-lan: port 1(eth0) entered forwarding state
Sep  8 17:44:12 OpenWrt kern.info kernel: [   46.470000] br-lan: port 1(eth0) entered forwarding state
Sep  8 17:44:13 OpenWrt user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Sep  8 17:44:13 OpenWrt user.info sysinit: 'radio0' is disabled
Sep  8 17:44:14 OpenWrt user.info sysinit: 'radio0' is disabled
Sep  8 17:44:14 OpenWrt user.info sysinit: 'radio0' is disabled
Sep  8 17:44:14 OpenWrt kern.info kernel: [   48.470000] br-lan: port 1(eth0) entered forwarding state
Sep  8 17:44:14 OpenWrt kern.info kernel: [   48.540000] eth1: link up (100Mbps/Full duplex)
Sep  8 17:44:15 OpenWrt daemon.notice netifd: wan (909): Sending discover...
Sep  8 17:44:15 OpenWrt daemon.notice netifd: wan (909): Sending select for 192.168.2.100...
Sep  8 17:44:15 OpenWrt daemon.notice netifd: wan (909): Lease of 192.168.2.100 obtained, lease time 172800
Sep  8 17:44:16 OpenWrt daemon.notice netifd: Interface 'wan' is now up
Sep  8 17:44:17 OpenWrt user.info sysinit: Loading defaults
Sep  8 17:44:18 OpenWrt user.info sysinit: Loading synflood protection
Sep  8 17:44:18 OpenWrt user.info syslog: SNet version started
Sep  8 17:44:18 OpenWrt daemon.notice miniupnpd[1254]: HTTP listening on port 5000
Sep  8 17:44:18 OpenWrt daemon.notice miniupnpd[1254]: Listening for NAT-PMP traffic on port 5351
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt daemon.err miniupnpd[1254]: sendto(udp_notify=10, 192.168.1.1): Operation not permitted
Sep  8 17:44:18 OpenWrt user.info sysinit: Adding custom chains
Sep  8 17:44:19 OpenWrt user.info sysinit: Loading zones
Sep  8 17:44:19 OpenWrt user.notice ifup: Allowing Router Advertisements on wan (eth1)
Sep  8 17:44:22 OpenWrt user.info sysinit: Loading forwardings
Sep  8 17:44:22 OpenWrt user.info sysinit: Loading rules
Sep  8 17:44:22 OpenWrt daemon.notice miniupnpd[1254]: received signal 15, good-bye
Sep  8 17:44:23 OpenWrt user.info sysinit: Loading redirects
Sep  8 17:44:23 OpenWrt user.info sysinit: Loading includes
Sep  8 17:44:23 OpenWrt user.info sysinit: Optimizing conntrack
Sep  8 17:44:23 OpenWrt user.info sysinit: Loading interfaces
Sep  8 17:44:23 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Sep  8 17:44:24 OpenWrt user.info syslog: SNet version started
Sep  8 17:44:24 OpenWrt daemon.notice miniupnpd[1725]: HTTP listening on port 5000
Sep  8 17:44:24 OpenWrt daemon.notice miniupnpd[1725]: Listening for NAT-PMP traffic on port 5351
Sep  8 17:44:25 OpenWrt user.info firewall: adding wan (eth1) to zone wan
Sep  8 17:44:25 OpenWrt user.notice ifup: Enabling Router Solicitations on loopback (lo)
Sep  8 17:44:26 OpenWrt user.notice miniupnpd: adding firewall rules for eth1 to zone wan
Sep  8 17:44:26 OpenWrt cron.info crond[1888]: crond: crond (busybox 1.19.4) started, log level 5
Sep  8 17:44:28 OpenWrt user.info sysinit: Generating RSA private key, 1024 bit long modulus
Sep  8 17:44:34 OpenWrt authpriv.info dropbear[2022]: Running in background
Sep  8 17:44:35 OpenWrt user.info sysinit: Generating selfsigned certificate with subject 'C=PL;ST=Warsaw;L=Warsaw;CN=OpenWrt;' and validity 2011-09-08 15:44:28-2013-09-07 15:44:28
Sep  8 17:44:37 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sep  8 17:44:37 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: started, version 2.62 cachesize 150
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq-dhcp[2063]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: using local addresses only for domain lan
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: reading /tmp/resolv.conf.auto
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: using nameserver 192.168.2.1#53
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: using local addresses only for domain lan
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq[2063]: read /etc/hosts - 1 addresses
Sep  8 17:44:40 OpenWrt daemon.info dnsmasq-dhcp[2063]: read /etc/ethers - 0 addresses
Sep  8 17:44:41 OpenWrt daemon.info dnsmasq-dhcp[2063]: DHCPREQUEST(br-lan) 192.168.1.174 00:1f:d0:69:b0:ce
Sep  8 17:44:41 OpenWrt daemon.info dnsmasq-dhcp[2063]: DHCPACK(br-lan) 192.168.1.174 00:1f:d0:69:b0:ce kamil-komputer
Sep  8 17:44:42 OpenWrt user.info sysinit: setting up led USB
Sep  8 17:44:42 OpenWrt user.info watchcat: starting all tasks
Sep  8 17:44:42 OpenWrt user.info wathchat: started task (mode=ping;period=21600;pinghosts=8.8.8.8;pingperiod=1080;forcedelay=30)
Sep  8 17:44:42 OpenWrt user.info watchcat: all tasks started
Sep  8 17:44:45 OpenWrt daemon.info dnsmasq-dhcp[2063]: DHCPINFORM(br-lan) 192.168.1.174 00:1f:d0:69:b0:ce
Sep  8 17:44:45 OpenWrt daemon.info dnsmasq-dhcp[2063]: DHCPACK(br-lan) 192.168.1.174 00:1f:d0:69:b0:ce kamil-komputer
Oct 11 19:00:57 OpenWrt cron.err crond[1888]: time disparity of 574636 minutes detected
Oct 11 19:03:01 OpenWrt cron.info crond[1888]: crond: USER root pid 2138 cmd /sbin/3gtester
Oct 11 19:06:01 OpenWrt cron.info crond[1888]: crond: USER root pid 2341 cmd /sbin/3gtester
Oct 11 19:07:39 OpenWrt user.info syslog: Listening to :::631 (IPv6)
Oct 11 19:07:39 OpenWrt user.info syslog: Listening to 0.0.0.0:631 (IPv4)
Oct 11 19:07:39 OpenWrt user.warn syslog: "AuthClass System" is deprecated; consider using "Require user @SYSTEM" on line 44.
Oct 11 19:07:39 OpenWrt user.info syslog: Remote access is enabled.
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Loaded configuration file "/etc/cups/cupsd.conf"
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Configured for up to 100 clients.
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Allowing up to 100 client connections per host.
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Creating CUPS default administrative policy:
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: <Policy default>
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: <Limit Send-Document Send-URI Cancel-Job Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Susp
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Order Deny,Allow
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Require user @OWNER @SYSTEM
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: </Limit>
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: <Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Pri
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Order Deny,Allow
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: AuthType Default
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Require user @SYSTEM
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: </Limit>
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: <Limit All>
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Order Deny,Allow
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: </Limit>
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: </Policy>
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Full reload is required.
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 39 filters...
Oct 11 19:07:39 OpenWrt lpr.err cupsd[2393]: cupsdLoadBanners: Unable to open banner directory "/usr/share/cups/banners": No such file or directory
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Generating printcap /etc/printcap...
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Full reload complete.
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Cleaning out old files in "/var/cups"...
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Cleaning out old files in "/var/cache/cups"...
Oct 11 19:07:39 OpenWrt lpr.err cupsd[2393]: Unable to open listen socket for address :::631 - Address family not supported by protocol.
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Listening to 0.0.0.0:631 on fd 4...
Oct 11 19:07:39 OpenWrt lpr.info cupsd[2393]: Resuming new connection processing...
Oct 11 19:08:10 OpenWrt lpr.info cupsd[2393]: Saving printers.conf...
Oct 11 19:09:01 OpenWrt cron.info crond[1888]: crond: USER root pid 2410 cmd /sbin/3gtester

33 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

Cups się uruchamia...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

34 Odpowiedź przez Kamil10p (edytowany przez Kamil10p 2012-10-11 19:02:09)

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Tylko dlaczego nie wykrywa drukarki...
Może dodać ją ręcznie? Tylko jakie ustawienia dać?
To jest plik konfiguracyjny cupsa:
AccessLog syslog
ErrorLog syslog
# Show troubleshooting information in error_log.
LogLevel debug
PageLog syslog
PreserveJobHistory No
PreserveJobFiles No
AutoPurgeJobs Yes
MaxJobs 25
MaxPrinterHistory 10
RequestRoot /var/cups
User root
Group root
RIPCache 512k
TempDir /var/cups
# Allow remote access
Port 631
HostNameLookups Off
KeepAlive On
# Enable printer sharing and shared printers.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseRemoteProtocols CUPS
BrowseAddress @LOCAL
BrowseLocalProtocols CUPS
BrowseProtocols cups
<Location />
  # Allow shared printing and remote administration...
  Order allow,deny
  Allow @LOCAL
</Location>
<Location /admin>
  AuthType Basic
  AuthClass System
  # Allow remote administration...
  Order allow,deny
  Allow @LOCAL
</Location>
# Allow remote access to the configuration files...
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
  Allow @LOCAL
</Location>

35 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

W printers.conf patrz. Tam masz zdefiniowaną jedną drukarkę usb i jedną lpt.

PS. kmod-usb-printer zainstalowałeś?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

36 Odpowiedź przez Kamil10p (edytowany przez Kamil10p 2012-10-11 20:25:39)

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

kmod usb printer jest domyślnie zainstalowane w twoim openwrt (trunk)...
Przeinstalowywałem go nawet, ale to nic nie dało.

vi /etc/cups/printers.conf
--------------------------------------------


# Printer configuration file for CUPS v1.4.4

# Written by cupsd on 2012-10-11 19:24

# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING

<Printer LP>

Info Parallel Port Printer

DeviceURI parallel:/dev/printers/0

State Idle

StateTime 1349975259

Type 4

Accepting Yes

Shared Yes

JobSheets none none

QuotaPeriod 0

PageLimit 0

KLimit 0

OpPolicy default

ErrorPolicy stop-printer

</Printer>

<DefaultPrinter USB>

Info USB Printer

DeviceURI usb:/dev/usb/lp0

State Idle

StateTime 1349975259- /etc/cups/printers.conf 1/33 3%vi: can't read user input

37 Odpowiedź przez Kamil10p

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Da się jakoś sprawdzić gdzie router zapisał tą drukarkę- /dev/ i gdzie właśnie?

38 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

/dev/lp0

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

39 Odpowiedź przez Kamil10p

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

Zauważyłem,że drukarka potrzebuje sterownika kmod-usb-lp... Tylko skąd go pobrać

40 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

Nie istnieje taki dla aktualnych kerneli. kmod-usb-printer jest od tego.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

41 Odpowiedź przez Kamil10p (edytowany przez Kamil10p 2012-10-12 13:30:18)

  • Zarejestrowany: 2012-10-06
  • Posty: 196

Odp: Drukarka usb nie działa na open wrt

A on obsluguje sterownik usb-lp?

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04e8 ProdID=3313 Rev= 1.00
S:  Manufacturer=Samsung Electronics Co., Ltd.
S:  Product=ML-1670 Series
S:  SerialNumber=Z6ENBKDB502711Y.
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=1250us
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

42 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,075

Odp: Drukarka usb nie działa na open wrt

Widzisz że tak.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona