1,276 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Cezary napisał/a:

https://openwrt.org/inbox/toh/xiaomi/ax3000t#debricking

Udało mi sie przez TFTP przywrócic do stockfirmware, lecz teraz , mam chinskie znaczki  i interfejs pod 192.168.31.1.

Jak teraz wgrac openwrt ?

1,277 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Akapit dalej w tym samym linku - po prostu wgraj przez tftp openwrt teraz, tak samo jak byś miał router wyjęty z pudełka.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,278 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

na twojej stronie jest do pobrania wersja zwykła oraz wersja uboot, która wybrać ? standardowo traktuje to jako pierwsza instalacja czyli wersja factory ?
Plik factory ma rozszerzenie .ubi , przez wrzuceniem do folderu TFTP mam zmienic jego nazwe i rozszerzenie ? jezeli tak to na jaką?

Moja wersja routera to RD03 czyli Chińska.

1,279 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Uruchomił ci się z oryginalnym softem, więc nie masz bootloadera zmodyfikowanego przez openwrt. Masz sprzęt tak jak po wyjściu z fabryki. To czy wgrasz zwykłe czy z ubootmodem to już od ciebie zależy co zrobisz.

Masz opisane: https://openwrt.org/inbox/toh/xiaomi/ax … stallation więc po prostu postępuj po kolei. Nawet tam bez tftp sobie poradzisz. Albo nawet z wykorzystaniem XMiR-Patchera

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,280 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

spróbuje przez TFTP , tylko czy zmienic nazwe pliku na factory.bin czy miwifi_stock.bin

1,281 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Jak ręcznie podajesz co ma zaciągać to podajesz nawę, więc obojętnie jak się będzie nazywał. aaa też będzie dobry. I nie factory - initramfs uruchom a z niego zrób aktualizację normalnym sysupgrade.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,282 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Czyli ta srodkowa wersja z roszerzeniem .bin z opisiem - Jądro Linuksa z minimalnym systemem plików. Przydatne do pierwszej instalacji lub odzyskiwania ? pierwszy raz jej bede uzywał

1,283 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Użyj może jednak XMiR-Patchera?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,284 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

do xmir-patcher wersja intramfs-factory.ubi ?

1,285 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

tak

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,286 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Dziekuje Cezary za pomoc, poszło bez problemu/

Użyłem XmiR-Patchera na podstawie tego filmu z YT, może komuś sie przyda
https://www.youtube.com/watch?v=JnpEvV2Z4lw

Najpierw wersja intramfs-factory.ubi , a pozniej przez interfejs Sysupgrade.

Mam jeszcze jedno pytanie
Teraz aby przez przez na Gargoyle , mam wgrac przez luci która wersje ?

Chyba Garogoyle bedzie łatwiejszy dla kolegi

1,287 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

sysupgrade - ale zastanów się czy to zrobić, bo gargoyle opera się na openwrt 23, który nie ma wszystkich łatek, np. do pamięci. Więc zależy co masz w routerze.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,288 Odpowiedź przez pazdzioch (edytowany przez pazdzioch 2025-08-16 11:16:52)

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

On tylko używał VPN bo dawał mu adres ipv4, wcześniej miał problemy z usługami z pracy bo Play dawał ipv6, ale zauważyl że od pewnego czasu ma ciągle ipv4, więc korzysta z głównego routera Routera od Play, a ten będzie używał jako punkt dostepowy na parterze, wie myślę że Garogyle mu wystarczy

1,289 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

To nie chodzi o to czy wystarczy czy nie tylko że openwrt 23 nie obsługuje nowych chipów pamięci które mogą być w sprzęcie (i switcha).

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,290 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

No dobra, to zsotawiam.
On zrobił reset przyciskiem , bo nie mogl sie dostac do interfejsu, zapomniał hasło, i po tym zabiegu router mu migałcały czas na pomarańczowo jest to możliwe ?

1,291 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Ale nie "to zostawiam" tylko sprawdź w logach co jest sprzęcie - jak standardowa pamięć ESMT i nie masz switcha Airoha to możesz to wgrywać.

Zresztą - przecież umiesz go reanimować. Co złego może się stać?

Wciśnij reset i przekonaj się co będzie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,292 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

zrobilem reset i wstaje bez problemu, nie wiem co on musial zrobic, wczesniej było Openwrt 23, moze sie wysypało tak jak pisałes.

Mam Airoha

Tue Jul 29 23:18:49 2025 kern.info kernel: [    2.994039] an8855-switch an8855-switch.2.auto: Link is Up - 2.5Gbps/Full - flow control rx/tx
Tue Jul 29 23:18:49 2025 kern.info kernel: [    3.069635] an8855-switch an8855-switch.2.auto wan (uninitialized): PHY [mdio_an8855-1:01] driver [Airoha AN8855 internal PHY] (irq=POLL)
Tue Jul 29 23:18:49 2025 kern.info kernel: [    3.159635] an8855-switch an8855-switch.2.auto lan2 (uninitialized): PHY [mdio_an8855-1:02] driver [Airoha AN8855 internal PHY] (irq=POLL)
Tue Jul 29 23:18:49 2025 kern.info kernel: [    3.249630] an8855-switch an8855-switch.2.auto lan3 (uninitialized): PHY [mdio_an8855-1:03] driver [Airoha AN8855 internal PHY] (irq=POLL)
Tue Jul 29 23:18:49 2025 kern.info kernel: [    3.339630] an8855-switch an8855-switch.2.auto lan4 (uninitialized): PHY [mdio_an8855-1:04] driver [Airoha AN8855 internal PHY] (irq=POLL

1,293 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Więc nie, nie możesz wgrać gargoyle, nie możesz tez nic starszego niż 24.10.0

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,294 Odpowiedź przez pazdzioch

  • Zarejestrowany: 2018-05-25
  • Posty: 494

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

tak teraz zalogowałem sie na mojego AX  i z logów wychodzi ze u mnie jest ESMT  i brak switcha Airoha, wiec chyba zamienie z kolegą routery.
Jak możesz zerknąc Cezary to potwierdz moją teorie smile

Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.000000] Linux version 6.6.100 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Tue Jul 29 21:18:45 2025
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Machine model: Xiaomi Mi Router AX3000T
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Zone ranges:
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   DMA      [mem 0x0000000040000000-0x000000004fffffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   DMA32    empty
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   Normal   empty
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Movable zone start for each node
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Early memory node ranges
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000048000000-0x000000004fffffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] psci: probing for conduit method from DT.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] psci: PSCIv1.1 detected in firmware.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] psci: Using standard PSCI v0.2 function IDs
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] psci: SMC Calling Convention v1.2
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] percpu: Embedded 18 pages/cpu s35624 r8192 d29912 u73728
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    0.000000] pcpu-alloc: s35624 r8192 d29912 u73728 alloc=18*4096
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Detected VIPT I-cache on CPU0
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] CPU features: detected: GIC system register CPU interface
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] alternatives: applying boot alternatives
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 swiotlb=512 rootfstype=squashfs firmware=0 mtd=ubi uart_en=1
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.000000] Unknown kernel command line parameters "firmware=0 mtd=ubi uart_en=1", will be passed to user space.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64512
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] software IO TLB: area num 2.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] software IO TLB: mapped [mem 0x000000004f900000-0x000000004fa00000] (1MB)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Memory: 239272K/262144K available (9088K kernel code, 1000K rwdata, 1676K rodata, 448K init, 307K bss, 22872K reserved, 0K cma-reserved)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000]     Tracing variant of Tasks RCU enabled.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] GICv3: 640 SPIs implemented
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] GICv3: 0 Extended SPIs implemented
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] Root IRQ handler: 0xffffffc080010080
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] GICv3: GICv3 features: 16 PPIs
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000081] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.000089] pid_max: default: 32768 minimum: 301
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.002959] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.002967] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.warn kernel: [    0.005115] cacheinfo: Unable to detect cache hierarchy for CPU 0
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.005659] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.005800] rcu: Hierarchical SRCU implementation.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.005802] rcu:     Max phase no-delay instances is 1000.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006249] smp: Bringing up secondary CPUs ...
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006616] Detected VIPT I-cache on CPU1
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006661] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006691] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006757] smp: Brought up 1 node, 2 CPUs
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006763] SMP: Total of 2 processors activated.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006767] CPU features: detected: 32-bit EL0 Support
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006770] CPU features: detected: CRC32 instructions
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006801] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006805] CPU: All CPU(s) started at EL2
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.006806] alternatives: applying system-wide alternatives
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.010920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.010937] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.012194] pinctrl core: initialized pinctrl subsystem
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.013331] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.013729] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.013754] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.013774] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.014183] thermal_sys: Registered thermal governor 'fair_share'
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.014187] thermal_sys: Registered thermal governor 'bang_bang'
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.014190] thermal_sys: Registered thermal governor 'step_wise'
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.014192] thermal_sys: Registered thermal governor 'user_space'
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.014287] ASID allocator initialised with 65536 entries
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.015219] pstore: Using crash dump compression: deflate
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.015223] pstore: Registered ramoops as persistent store backend
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.015226] ramoops: using 0x10000@0x42ff0000, ecc: 0
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.017005] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.022779] Modules: 29600 pages in range for non-PLT usage
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.022788] Modules: 521120 pages in range for PLT usage
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.023758] cryptd: max_cpu_qlen set to 1000
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.024863] SCSI subsystem initialized
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    0.025075] libata version 3.00 loaded.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.026809] clocksource: Switched to clocksource arch_sys_counter
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.029014] NET: Registered PF_INET protocol family
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.029122] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030442] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030456] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030465] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030484] TCP bind hash table entries: 2048 (order: 4, 65536 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030538] TCP: Hash tables configured (established 2048 bind 2048)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030857] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030958] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.030973] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.031176] NET: Registered PF_UNIX/PF_LOCAL protocol family
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.031200] PCI: CLS 0 bytes, default 64
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.032799] workingset: timestamp_bits=46 max_order=16 bucket_order=0
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.037657] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.037666] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.093874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.104532] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.108320] printk: console [ttyS0] disabled
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.128718] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.128759] printk: console [ttyS0] enabled
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.897232] loop: module loaded
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.903612] spi-nand spi0.0: calibration result: 0x3
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.909063] spi-nand spi0.0: ESMT SPI NAND was found.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.914114] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.922578] Signature found at block 1023 [0x07fe0000]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.927739] NMBM management region starts at block 960 [0x07800000]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.935738] First info table with writecount 0 found in block 960
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.944574] Second info table with writecount 0 found in block 963
Sat Aug 16 22:20:37 2025 kern.info kernel: [    0.950775] NMBM has been successfully attached
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.955650] 10 fixed-partitions partitions found on MTD device spi0.0
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.962105] Creating 10 MTD partitions on "spi0.0":
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.966978] 0x000000000000-0x000000100000 : "BL2"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.972666] 0x000000100000-0x000000140000 : "Nvram"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.978165] 0x000000140000-0x000000180000 : "Bdata"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.983675] 0x000000180000-0x000000380000 : "Factory"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.990478] 0x000000380000-0x000000580000 : "FIP"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    0.996649] 0x000000580000-0x0000005c0000 : "crash"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    1.002166] 0x0000005c0000-0x000000600000 : "crash_log"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    1.008033] 0x000007600000-0x000007640000 : "KF"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    1.013252] 0x000000600000-0x000002800000 : "ubi_kernel"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    1.035373] 0x000002800000-0x000007600000 : "ubi"
Sat Aug 16 22:20:37 2025 kern.warn kernel: [    1.722620] an8855-switch: probe of an8855-switch.2.auto failed with error -110
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.735373] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081680000, irq 75
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.745146] i2c_dev: i2c /dev entries driver
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.752398] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.762234] NET: Registered PF_INET6 protocol family
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.768421] Segment Routing with IPv6
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.772118] In-situ OAM (IOAM) with IPv6
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.776075] NET: Registered PF_PACKET protocol family
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.781178] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.794397] 8021q: 802.1Q VLAN Support v1.8
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.898072] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.906816] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.917856] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=80)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.940045] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=81)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.962178] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=82)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.984297] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=83)
Sat Aug 16 22:20:37 2025 kern.info kernel: [    1.995907] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
Sat Aug 16 22:20:37 2025 kern.info kernel: [    2.002681] DSA: tree 0 setup
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.006138] UBI: auto-attach mtd9
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.009487] ubi0: default fastmap pool size: 30
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.014007] ubi0: default fastmap WL pool size: 15
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.018796] ubi0: attaching mtd9
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.284633] ubi0: scanning is finished
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.294267] ubi0: attached mtd9 (name "ubi", size 78 MiB)
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.299690] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.306553] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.313335] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.320290] ubi0: good PEBs: 624, bad PEBs: 0, corrupted PEBs: 0
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.326284] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.333495] ubi0: max/mean erase counter: 9/3, WL threshold: 4096, image sequence number: 860925485
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.342527] ubi0: available PEBs: 0, total reserved PEBs: 624, PEBs reserved for bad PEB handling: 19
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.351741] ubi0: background thread "ubi_bgt0d" started, PID 653
Sat Aug 16 22:20:37 2025 kern.info kernel: [    2.352501] block ubiblock0_0: created from ubi0:0(rootfs)
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    2.363235] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Sat Aug 16 22:20:37 2025 kern.info kernel: [    2.370310] clk: Disabling unused clocks
Sat Aug 16 22:20:37 2025 kern.info kernel: [    2.378725] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    2.386052] Freeing unused kernel memory: 448K
Sat Aug 16 22:20:37 2025 kern.info kernel: [    2.390617] Run /sbin/init as init process
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.394703]   with arguments:
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.397685]     /sbin/init
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.400381]   with environment:
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.403508]     HOME=/
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.405856]     TERM=linux
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.408554]     firmware=0
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.411248]     mtd=ubi
Sat Aug 16 22:20:37 2025 kern.debug kernel: [    2.413682]     uart_en=1
Sat Aug 16 22:20:37 2025 user.info kernel: [    2.618947] init: Console is alive
Sat Aug 16 22:20:37 2025 user.info kernel: [    2.622473] init: - watchdog -
Sat Aug 16 22:20:37 2025 user.info kernel: [    3.029072] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sat Aug 16 22:20:37 2025 kern.warn kernel: [    3.051281] gpio_button_hotplug: loading out-of-tree module taints kernel.
Sat Aug 16 22:20:37 2025 user.info kernel: [    3.060991] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sat Aug 16 22:20:37 2025 user.info kernel: [    3.069934] init: - preinit -
Sat Aug 16 22:20:37 2025 kern.info kernel: [    3.452051] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
Sat Aug 16 22:20:37 2025 kern.info kernel: [    3.460552] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
Sat Aug 16 22:20:37 2025 kern.info kernel: [    3.481162] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    4.426810] random: crng init done
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.690193] UBIFS (ubi0:1): Mounting in unauthenticated mode
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.695937] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 786
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.768693] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.776524] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.786447] UBIFS (ubi0:1): FS size: 68059136 bytes (64 MiB, 536 LEBs), max 546 LEBs, journal size 3428352 bytes (3 MiB, 27 LEBs)
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.798089] UBIFS (ubi0:1): reserved for root: 3214600 bytes (3139 KiB)
Sat Aug 16 22:20:37 2025 kern.notice kernel: [    7.804689] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 7CB7E06B-51E8-48D5-8F26-436AC8DDE187, small LPT model
Sat Aug 16 22:20:37 2025 user.info kernel: [    7.817375] mount_root: overlay filesystem has not been fully initialized yet
Sat Aug 16 22:20:37 2025 user.info kernel: [    7.825353] mount_root: switching to ubifs overlay
Sat Aug 16 22:20:37 2025 kern.warn kernel: [    7.833952] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Sat Aug 16 22:20:37 2025 user.debug kernel: [    8.047225] urandom-seed: Seed file not found (/etc/urandom.seed)
Sat Aug 16 22:20:37 2025 user.info kernel: [    8.098716] procd: - early -
Sat Aug 16 22:20:37 2025 user.info kernel: [    8.101662] procd: - watchdog -
Sat Aug 16 22:20:37 2025 user.info kernel: [    8.643745] procd: - watchdog -
Sat Aug 16 22:20:37 2025 user.info kernel: [    8.647082] procd: - ubus -
Sat Aug 16 22:20:37 2025 user.info kernel: [    8.801155] procd: - init -
Sat Aug 16 22:20:37 2025 user.info kernel: [    9.118876] kmodloader: loading kernel modules from /etc/modules.d/*
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.156444] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.166992] tun: Universal TUN/TAP device driver, 1.6
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.175405] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.213671] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.221171] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
Sat Aug 16 22:20:37 2025 user.info kernel: [    9.306997] urngd: v1.0.2 started.
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.587365] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823161240a
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.587365]
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.788640] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823161304
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.884810] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823161841
Sat Aug 16 22:20:37 2025 kern.info kernel: [    9.982293] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
Sat Aug 16 22:20:37 2025 kern.info kernel: [   10.038899] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
Sat Aug 16 22:20:37 2025 kern.info kernel: [   10.144394] PPP generic driver version 2.4.2
Sat Aug 16 22:20:37 2025 kern.info kernel: [   10.150471] NET: Registered PF_PPPOX protocol family
Sat Aug 16 22:20:37 2025 kern.info kernel: [   10.157955] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Sat Aug 16 22:20:37 2025 kern.info kernel: [   10.165784] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sat Aug 16 22:20:37 2025 user.info kernel: [   10.179004] kmodloader: done loading kernel modules from /etc/modules.d/*
Sat Aug 16 22:20:37 2025 kern.warn kernel: [   10.526755] mtdblock: MTD device 'Bdata' is NAND, please consider using UBI block devices instead.
Sat Aug 16 22:20:37 2025 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sat Aug 16 22:20:37 2025 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Aug 16 22:20:38 2025 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Sat Aug 16 22:20:38 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Sat Aug 16 22:20:38 2025 authpriv.info dropbear[2010]: Not backgrounding
Sat Aug 16 22:20:39 2025 daemon.notice procd: /etc/rc.d/S25packet_steering: pid 393's current affinity list: 0-1
Sat Aug 16 22:20:39 2025 daemon.notice procd: /etc/rc.d/S25packet_steering: pid 393's new affinity list: 0
Sat Aug 16 22:20:39 2025 daemon.notice procd: /etc/rc.d/S25packet_steering: pid 394's current affinity list: 0-1
Sat Aug 16 22:20:39 2025 daemon.notice procd: /etc/rc.d/S25packet_steering: pid 394's new affinity list: 0
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: vrf
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: bonding
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: 8021ad
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: 8021q
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: macvlan
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: veth
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: bridge
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: Network device
Sat Aug 16 22:20:39 2025 user.notice : Added device handler type: tunnel
Sat Aug 16 22:20:39 2025 daemon.notice wpa_supplicant[2166]: Successfully initialized wpa_supplicant
Sat Aug 16 22:20:40 2025 cron.info crond[2528]: crond (busybox 1.36.1) started, log level 5
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.577537] mtk_soc_eth 15100000.ethernet eth0: Link is Down
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.599172] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.609929] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.622714] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.634000] br-lan: port 1(lan2) entered blocking state
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.639295] br-lan: port 1(lan2) entered disabled state
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.644544] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.650826] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.660595] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'lan' is enabled
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'lan' is setting up now
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'lan' is now up
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.679983] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.691155] br-lan: port 2(lan3) entered blocking state
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.696391] br-lan: port 2(lan3) entered disabled state
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.701693] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.709714] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.725877] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.737481] br-lan: port 3(lan4) entered blocking state
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.742717] br-lan: port 3(lan4) entered disabled state
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.748025] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.756374] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'loopback' is enabled
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'loopback' is now up
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'wan' is enabled
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'wan6' is enabled
Sat Aug 16 22:20:40 2025 kern.info kernel: [   15.774689] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode
Sat Aug 16 22:20:40 2025 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Network device 'eth0' link is up
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Network device 'lo' link is up
Sat Aug 16 22:20:40 2025 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Aug 16 22:20:40 2025 daemon.notice netifd: radio0 (2711): WARNING: Variable 'data' does not exist or is not an array/object
Sat Aug 16 22:20:40 2025 daemon.notice netifd: radio1 (2712): WARNING: Variable 'data' does not exist or is not an array/object
Sat Aug 16 22:20:41 2025 daemon.err nlbwmon[2741]: The netlink receive buffer size of 524288 bytes will be capped to 212992 bytes
Sat Aug 16 22:20:41 2025 daemon.err nlbwmon[2741]: by the kernel. The net.core.rmem_max sysctl limit needs to be raised to
Sat Aug 16 22:20:41 2025 daemon.err nlbwmon[2741]: at least 524288 in order to sucessfully set the desired receive buffer size!
Sat Aug 16 22:20:41 2025 user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan)
Sat Aug 16 22:20:42 2025 daemon.err collectd[2978]: configfile: stat (/tmp/collectd.conf) failed: No such file or directory
Sat Aug 16 22:20:42 2025 daemon.err collectd[2978]: Configuration file /tmp/collectd.conf is empty.
Sat Aug 16 22:20:42 2025 daemon.err collectd[2978]: Error: Parsing the config file failed!
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "cpu" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "interface" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "iwinfo" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "load" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "memory" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "rrdtool" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: rrdtool plugin: RRASingle = true: creating only AVERAGE RRAs
Sat Aug 16 22:20:42 2025 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Sat Aug 16 22:20:42 2025 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: plugin_load: plugin "sensors" successfully loaded.
Sat Aug 16 22:20:42 2025 daemon.err collectd[3126]: Initialization complete, entering read-loop.
Sat Aug 16 22:20:42 2025 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Sat Aug 16 22:20:42 2025 daemon.notice hostapd: Set new config for phy phy0:
Sat Aug 16 22:20:42 2025 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Sat Aug 16 22:20:42 2025 daemon.notice wpa_supplicant[2166]: Set new config for phy phy0
Sat Aug 16 22:20:42 2025 daemon.notice hostapd: Set new config for phy phy1:
Sat Aug 16 22:20:42 2025 daemon.notice wpa_supplicant[2166]: Set new config for phy phy1
Sat Aug 16 22:20:42 2025 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Sat Aug 16 22:20:42 2025 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Sat Aug 16 22:20:43 2025 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Sat Aug 16 22:20:43 2025 daemon.notice wpa_supplicant[2166]: Set new config for phy phy0
Sat Aug 16 22:20:43 2025 daemon.notice wpa_supplicant[2166]: Set new config for phy phy1
Sat Aug 16 22:20:43 2025 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: Set new config for phy phy0: /var/run/hostapd-phy0.conf
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: Restart interface for phy phy0
Sat Aug 16 22:20:43 2025 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Sat Aug 16 22:20:43 2025 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Sat Aug 16 22:20:43 2025 user.notice nlbwmon: Reloading nlbwmon due to ifup of loopback (lo)
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=PL ieee80211d=1 hw_mode=g supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 120 240 beacon_int=100 stationary_ap=1 chanlist=1 #num_global_macaddr=1 #macaddr_base= ieee80211n=1 ht_coex=0 ht_capab=[LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935] ieee80211ax=1 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_info_txop_request=0 he_mu_edca_ac_be_aifsn=8 he_mu_edca_ac_be_aci=0 he_mu_edca_ac_be_ecwmin=9 he_mu_edca_ac_be_ecwmax=10 he_mu_edca_ac_be_timer=255 he_mu_edca_ac_bk_aifsn=15 he_mu_edca_ac_bk_aci=1 he_mu_edca_ac_bk_ecwmin=9 he_mu_edca_ac_bk_ecwmax=10 he_mu_edca_ac_bk_timer=255 he_mu_edca_ac_vi_ecwmin=5 he_mu_edca_ac_v
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.271448] br-lan: port 4(phy0-ap0) entered blocking state
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.277051] br-lan: port 4(phy0-ap0) entered disabled state
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.282648] mt798x-wmac 18000000.wifi phy0-ap0: entered allmulticast mode
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.289692] mt798x-wmac 18000000.wifi phy0-ap0: entered promiscuous mode
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: phy0-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.484298] br-lan: port 4(phy0-ap0) entered blocking state
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.489932] br-lan: port 4(phy0-ap0) entered forwarding state
Sat Aug 16 22:20:43 2025 daemon.notice netifd: Network device 'phy0-ap0' link is up
Sat Aug 16 22:20:43 2025 daemon.notice netifd: bridge 'br-lan' link is up
Sat Aug 16 22:20:43 2025 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: phy0-ap0: interface state COUNTRY_UPDATE->ENABLED
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: phy0-ap0: AP-ENABLED
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: Restart interface for phy phy1
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=PL ieee80211d=1 ieee80211h=1 hw_mode=a beacon_int=100 stationary_ap=1 chanlist=40 tx_queue_data2_burst=2.0 #num_global_macaddr=1 #macaddr_base= ieee80211n=1 ht_coex=0 ht_capab=[HT40-][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7] ieee80211ax=1 he_oper_chwidth=1 he_oper_centr_freq_seg0_idx=42 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_q
Sat Aug 16 22:20:43 2025 daemon.notice netifd: Wireless device 'radio0' is now up
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.752369] br-lan: port 5(phy1-ap0) entered blocking state
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.758076] br-lan: port 5(phy1-ap0) entered disabled state
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.763697] mt798x-wmac 18000000.wifi phy1-ap0: entered allmulticast mode
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.770746] mt798x-wmac 18000000.wifi phy1-ap0: entered promiscuous mode
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.777709] br-lan: port 5(phy1-ap0) entered blocking state
Sat Aug 16 22:20:43 2025 kern.info kernel: [   18.783279] br-lan: port 5(phy1-ap0) entered forwarding state
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Aug 16 22:20:43 2025 daemon.notice hostapd: phy1-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Sat Aug 16 22:20:43 2025 daemon.notice netifd: Wireless device 'radio1' is now up
Sat Aug 16 22:20:44 2025 kern.info kernel: [   18.955713] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
Sat Aug 16 22:20:44 2025 kern.info kernel: [   18.962199] br-lan: port 1(lan2) entered blocking state
Sat Aug 16 22:20:44 2025 daemon.notice netifd: Network device 'lan2' link is up
Sat Aug 16 22:20:44 2025 kern.info kernel: [   18.968898] br-lan: port 1(lan2) entered forwarding state
Sat Aug 16 22:20:44 2025 user.notice root: bootcount: rd03 model detected, exit
Sat Aug 16 22:20:44 2025 daemon.notice hostapd: Switch own primary and secondary channel to get secondary channel with no Beacons from other BSSes
Sat Aug 16 22:20:44 2025 daemon.info procd: - init complete -
Sat Aug 16 22:20:44 2025 daemon.info urandom_seed[4127]: Seed saved (/etc/urandom.seed)
Sat Aug 16 22:20:44 2025 kern.info kernel: [   19.276871] br-lan: port 5(phy1-ap0) entered disabled state
Sat Aug 16 22:20:44 2025 kern.info kernel: [   19.527283] br-lan: port 5(phy1-ap0) entered blocking state
Sat Aug 16 22:20:44 2025 kern.info kernel: [   19.532868] br-lan: port 5(phy1-ap0) entered forwarding state
Sat Aug 16 22:20:44 2025 daemon.notice netifd: Network device 'phy1-ap0' link is up
Sat Aug 16 22:20:44 2025 daemon.notice hostapd: phy1-ap0: interface state HT_SCAN->ENABLED
Sat Aug 16 22:20:44 2025 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Sat Aug 16 22:20:45 2025 user.info adblock-4.4.2-r3[2365]: adblock instance started ::: action: boot, priority: 0, pid: 2365
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.9.100 -- 192.168.9.249, lease time 12h
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Aug 16 22:20:45 2025 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 names
Sat Aug 16 22:20:45 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Aug 16 22:20:46 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Sat Aug 16 22:20:46 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 names
Sat Aug 16 22:20:46 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Aug 16 22:20:46 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad IEEE 802.11: authenticated
Sat Aug 16 22:20:46 2025 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.9.134 f8:75:a4:3a:f7:b0
Sat Aug 16 22:20:46 2025 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.9.134 f8:75:a4:3a:f7:b0 Lenovo-ThinkCentre
Sat Aug 16 22:20:50 2025 daemon.info hostapd: phy0-ap0: STA 7c:dd:90:aa:2f:0c IEEE 802.11: authenticated
Sat Aug 16 22:20:50 2025 daemon.info hostapd: phy0-ap0: STA 7c:dd:90:aa:2f:0c IEEE 802.11: associated (aid 1)
Sat Aug 16 22:20:50 2025 daemon.notice hostapd: phy0-ap0: AP-STA-CONNECTED 7c:dd:90:aa:2f:0c auth_alg=open
Sat Aug 16 22:20:50 2025 daemon.info hostapd: phy0-ap0: STA 7c:dd:90:aa:2f:0c WPA: pairwise key handshake completed (RSN)
Sat Aug 16 22:20:50 2025 daemon.notice hostapd: phy0-ap0: EAPOL-4WAY-HS-COMPLETED 7c:dd:90:aa:2f:0c
Sat Aug 16 22:20:51 2025 user.info adblock-4.4.2-r3[2365]: download of 'adguard' failed, url: https://adguardteam.github.io/AdGuardSD … ilter.txt, rule: BEGIN{FS="[|^]"}/^\|\|([[:alnum:]_-]{1,63}\.)+[[:alpha:]]+\^(\$third-party)?$/{print tolower($3)}, categories: -, rc: 4
Sat Aug 16 22:20:51 2025 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Sat Aug 16 22:20:52 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad IEEE 802.11: associated (aid 2)
Sat Aug 16 22:20:52 2025 daemon.notice hostapd: phy0-ap0: AP-STA-CONNECTED 38:a5:c9:f0:5c:ad auth_alg=sae
Sat Aug 16 22:20:52 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad WPA: pairwise key handshake completed (RSN)
Sat Aug 16 22:20:52 2025 daemon.notice hostapd: phy0-ap0: EAPOL-4WAY-HS-COMPLETED 38:a5:c9:f0:5c:ad
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: started, version 2.90 cachesize 1000
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: DNS service limited to local subnets
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.9.100 -- 192.168.9.249, lease time 12h
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for test
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for local
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Sat Aug 16 22:20:54 2025 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 names
Sat Aug 16 22:20:54 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Aug 16 22:20:56 2025 user.info adblock-4.4.2-r3[2365]: blocklist with overall 0 blocked domains loaded successfully (Xiaomi Mi Router AX3000T, mediatek/filogic, OpenWrt 24.10-SNAPSHOT r28784-155eea44e7 )
Sat Aug 16 22:20:56 2025 daemon.notice hostapd: phy0-ap0: AP-STA-DISCONNECTED 38:a5:c9:f0:5c:ad
Sat Aug 16 22:20:57 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad IEEE 802.11: authenticated
Sat Aug 16 22:20:57 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad IEEE 802.11: associated (aid 2)
Sat Aug 16 22:20:57 2025 daemon.notice hostapd: phy0-ap0: AP-STA-CONNECTED 38:a5:c9:f0:5c:ad auth_alg=open
Sat Aug 16 22:20:57 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad WPA: pairwise key handshake completed (RSN)
Sat Aug 16 22:20:57 2025 daemon.notice hostapd: phy0-ap0: EAPOL-4WAY-HS-COMPLETED 38:a5:c9:f0:5c:ad
Sat Aug 16 22:21:00 2025 daemon.warn odhcpd[2451]: No default route present, overriding ra_lifetime to 0!
Sat Aug 16 22:21:03 2025 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 38:a5:c9:f0:5c:ad
Sat Aug 16 22:21:03 2025 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.9.141 38:a5:c9:f0:5c:ad
Sat Aug 16 22:21:03 2025 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.9.141 38:a5:c9:f0:5c:ad
Sat Aug 16 22:21:03 2025 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.9.141 38:a5:c9:f0:5c:ad wlan0
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: srrd_create: rrd_create (/tmp/rrd/OpenWrt/cpu-0/percent-interrupt.rrd) failed: can't parse argument '/tmp/rrd/OpenWrt/cpu-0/percent-interrupt.rrd'
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: cu_rrd_create_file: srrd_create (/tmp/rrd/OpenWrt/cpu-0/percent-interrupt.rrd) returned status -1.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: cu_rrd_create_file (/tmp/rrd/OpenWrt/cpu-0/percent-interrupt.rrd) failed.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: Filter subsystem: Built-in target `write': Dispatching value to all write plugins failed with status -1.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: Filter subsystem: Built-in target `write': Some write plugin is back to normal operation. `write' succeeded.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: srrd_create: rrd_create (/tmp/rrd/OpenWrt/cpu-0/percent-steal.rrd) failed: step size should be no less than one second
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: cu_rrd_create_file: srrd_create (/tmp/rrd/OpenWrt/cpu-0/percent-steal.rrd) returned status -1.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: cu_rrd_create_file (/tmp/rrd/OpenWrt/cpu-0/percent-steal.rrd) failed.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: Filter subsystem: Built-in target `write': Dispatching value to all write plugins failed with status -1.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: Filter subsystem: Built-in target `write': Some write plugin is back to normal operation. `write' succeeded.
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: rrd_update_r failed: /tmp/rrd/OpenWrt/iwinfo-phy0-ap0/signal_quality.rrd: opening '/tmp/rrd/OpenWrt/iwinfo-phy0-ap0/signal_quality.rrd': No such file or directory
Sat Aug 16 22:21:13 2025 daemon.err collectd[3126]: rrdtool plugin: rrd_update_r failed: /tmp/rrd/OpenWrt/iwinfo-phy1-ap0/bitrate.rrd: expected 1 data source readings (got 0) from /tmp/rrd/OpenWrt/iwinfo-phy1-ap0/bitrate.rrd:...
Sat Aug 16 22:21:16 2025 daemon.warn odhcpd[2451]: No default route present, overriding ra_lifetime to 0!
Sat Aug 16 22:21:32 2025 daemon.warn odhcpd[2451]: No default route present, overriding ra_lifetime to 0!
Sat Aug 16 22:25:56 2025 daemon.notice hostapd: phy0-ap0: AP-STA-DISCONNECTED 38:a5:c9:f0:5c:ad
Sat Aug 16 22:25:57 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad IEEE 802.11: authenticated
Sat Aug 16 22:25:57 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad IEEE 802.11: associated (aid 2)
Sat Aug 16 22:25:57 2025 daemon.notice hostapd: phy0-ap0: AP-STA-CONNECTED 38:a5:c9:f0:5c:ad auth_alg=open
Sat Aug 16 22:25:57 2025 daemon.info hostapd: phy0-ap0: STA 38:a5:c9:f0:5c:ad WPA: pairwise key handshake completed (RSN)
Sat Aug 16 22:25:57 2025 daemon.notice hostapd: phy0-ap0: EAPOL-4WAY-HS-COMPLETED 38:a5:c9:f0:5c:ad
Sat Aug 16 22:25:59 2025 daemon.info dnsmasq-dhcp[1]: DHCPDISCOVER(br-lan) 38:a5:c9:f0:5c:ad
Sat Aug 16 22:25:59 2025 daemon.info dnsmasq-dhcp[1]: DHCPOFFER(br-lan) 192.168.9.141 38:a5:c9:f0:5c:ad
Sat Aug 16 22:25:59 2025 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.9.141 38:a5:c9:f0:5c:ad
Sat Aug 16 22:25:59 2025 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.9.141 38:a5:c9:f0:5c:ad wlan0
Sat Aug 16 22:26:00 2025 daemon.err uhttpd[2603]: [info] luci: accepted login on /admin/system/flash for root from 192.168.9.134
Sat Aug 16 22:28:00 2025 daemon.notice netifd: Interface 'ProtonVPN' is setting up now
Sat Aug 16 22:28:00 2025 daemon.notice netifd: Interface 'ProtonVPN' is now down
Sat Aug 16 22:28:01 2025 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Sat Aug 16 22:28:01 2025 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 2 names
Sat Aug 16 22:28:01 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Sat Aug 16 22:28:02 2025 daemon.warn odhcpd[2451]: No default route present, overriding ra_lifetime to 0

1,295 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Chyba tak, możesz zamienić.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,296 Odpowiedź przez spamsool (edytowany przez spamsool 2025-08-18 19:36:57)

  • Zarejestrowany: 2013-06-08
  • Posty: 503

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

W końcu się wziąłem za robotę i wyciągnałem i odpaczkowałem z szuflady Xiaomi AX3000t zakupiony prawie półtora roku temu dokładnie 24 marca 2024 smile
Wgranie OpenWRT 24 za pomocą xmir-patcher poszło gładko. SSH, backup factory i od razu xmir-pacherem wgrałem mu od Cezarego obraz luci-24.10-snapshot-r28784-155eea44e7-mediatek-filogic-xiaomi_mi-router-ax3000t-initramfs-factory i potem nadgrałem sysupgrade w tej samej wersji, w sumie nie wiem czy to jest konieczny krok?

Ale to okazała się wersja 1.0.47 z flash ESMT i switch MediaTek MT7531AE więc to chyba najbardziej bezproblemowy model. Może nawet wgram mu Gargoyle. Na pudełku data produkcji 2023.11

Mam też kolejny do roboty jeszcze nie odpakowany, na pudełku data produkcji 2024.02 - ciekawe czy będzie już inny hw w środku?

[Edit]
Działa ok na obrazie od Cezarego, prędkość osiąga w zasadzie kablową, poniższy wynik 974/950 jest przy ustawieniu pasma na 80Mhz, bez WED, nie wiem czy zmiana na 160Mhz jest istotna, czy by dała cokolwiek?


https://imgur.com/a/2A4gKDL

1,297 Odpowiedź przez colin_net

  • Zarejestrowany: 2020-06-12
  • Posty: 106

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Jak zmienić soft z openwrt cezarego na wersję uboot ?

1,298 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

colin_net napisał/a:

Jak zmienić soft z openwrt cezarego na wersję uboot ?

https://openwrt.org/inbox/toh/xiaomi/ax … wrt_u-boot

Tylko zastanów się czy koniecznie przyniesie ci to jakieś korzyści.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,299 Odpowiedź przez spamsool (edytowany przez spamsool 2025-08-27 11:10:05)

  • Zarejestrowany: 2013-06-08
  • Posty: 503

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Cezary napisał/a:
colin_net napisał/a:

Jak zmienić soft z openwrt cezarego na wersję uboot ?

https://openwrt.org/inbox/toh/xiaomi/ax … wrt_u-boot

Tylko zastanów się czy koniecznie przyniesie ci to jakieś korzyści.

Czy ten uboot do wgrania na ax3000t to jest ten opisany pod linkiem?
Czy posiada jakieś web gui do awaryjnego flashowania?

https://openwrt.org/docs/techref/bootloader/uboot

1,300 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,319

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

To ogólny opis uboota. Na wiki openwrt o ax3000t masz info że uboot nasłuchuje na tftp określonego pliku dzięki czemu możliwe jest recovery bez uart'a

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona