1,126 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Wgrałem jeszcze raz z linku który podałeś.
Poszło bez problemu,router się uruchomił uart wypluł:

 Press UP/DOWN to move, ENTER to select, ESC to quit
No size specified -> Using max size (10412032)
Read 10412032 bytes from volume fit to 0000000046000000

## Checking Image at 46000000 ...
   FIT image found
   FIT description: ARM64 OpenWrt FIT (Flattened Image Tree)
    Image 0 (kernel-1)
     Description:  ARM64 OpenWrt Linux-6.6.83
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x46001000
     Data Size:    5635646 Bytes = 5.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   c9adfb50
     Hash algo:    sha1
     Hash value:   3dc15da5660e38b781b48008574fe207928f3880
    Image 1 (fdt-1)
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46561000
     Data Size:    28267 Bytes = 27.6 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   c2be19e4
     Hash algo:    sha1
     Hash value:   ac3ae4949cd90aee05386f42cf4fabdca631d2cf
    Image 2 (rootfs-1)
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod rootfs
     Type:         Filesystem Image
     Compression:  uncompressed
     Data Start:   0x46568000
     Data Size:    4702208 Bytes = 4.5 MiB
     Hash algo:    crc32
     Hash value:   fa350cd6
     Hash algo:    sha1
     Hash value:   af4bb7e68facfe26b5c524065e60a56434ee9620
    Default Configuration: 'config-1'
    Configuration 0 (config-1)
     Description:  OpenWrt xiaomi_mi-router-ax3000t-ubootmod
     Kernel:       kernel-1
     FDT:          fdt-1
     Loadables:    rootfs-1
## Checking hash(es) for FIT Image at 46000000 ...
   Hash(es) for Image 0 (kernel-1): crc32+ sha1+
   Hash(es) for Image 1 (fdt-1): crc32+ sha1+
   Hash(es) for Image 2 (rootfs-1): crc32+ sha1+
## Loading kernel from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.83
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x46001000
     Data Size:    5635646 Bytes = 5.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   c9adfb50
     Hash algo:    sha1
     Hash value:   3dc15da5660e38b781b48008574fe207928f3880
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46561000
     Data Size:    28267 Bytes = 27.6 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   c2be19e4
     Hash algo:    sha1
     Hash value:   ac3ae4949cd90aee05386f42cf4fabdca631d2cf
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x46561000
Working FDT set to 46561000
## Loading loadables from FIT Image at 46000000 ...
   Trying 'rootfs-1' loadables subimage
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod rootfs
     Type:         Filesystem Image
     Compression:  uncompressed
     Data Start:   0x46568000
     Data Size:    4702208 Bytes = 4.5 MiB
     Hash algo:    crc32
     Hash value:   fa350cd6
     Hash algo:    sha1
     Hash value:   af4bb7e68facfe26b5c524065e60a56434ee9620
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Uncompressing Kernel Image to 48000000
   Loading Device Tree to 000000004e7c9000, end 000000004e7d2e6a ... OK
Working FDT set to 4e7c9000
Add 'ramoops@42ff0000' node failed: FDT_ERR_EXISTS

Starting kernel ...

<6>[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
<5>[    0.000000] Linux version 6.6.83 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28563-9e63e2410d) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Wed Mar 19 12:20:21 2025
<6>[    0.000000] Machine model: Xiaomi Mi Router AX3000T (OpenWrt U-Boot layout)
<6>[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
<6>[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
<6>[    0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000
<6>[    0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000
<6>[    0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   DMA      [mem 0x0000000040000000-0x000000004fffffff]
<6>[    0.000000]   DMA32    empty
<6>[    0.000000]   Normal   empty
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
<6>[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
<6>[    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff]
<6>[    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff]
<6>[    0.000000]   node   0: [mem 0x0000000048000000-0x000000004fffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff]
<6>[    0.000000] psci: probing for conduit method from DT.
<6>[    0.000000] psci: PSCIv1.1 detected in firmware.
<6>[    0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
<6>[    0.000000] psci: SMC Calling Convention v1.4
<6>[    0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
<7>[    0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[    0.000000] Detected VIPT I-cache on CPU0
<6>[    0.000000] CPU features: detected: GIC system register CPU interface
<6>[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
<6>[    0.000000] alternatives: applying boot alternatives
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 console_msg_format=syslog root=/dev/fit0 rootwait
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
<6>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64512
<6>[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
<6>[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
<6>[    0.000000] software IO TLB: area num 2.
<6>[    0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 0MB
<6>[    0.000000] software IO TLB: mapped [mem 0x000000004fe41000-0x000000004fec1000] (0MB)
<6>[    0.000000] Memory: 239856K/262144K available (9024K kernel code, 1000K rwdata, 1672K rodata, 448K init, 307K bss, 22288K reserved, 0K cma-reserved)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] rcu: Hierarchical RCU implementation.
<6>[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000]     Tracing variant of Tasks RCU enabled.
<6>[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
<6>[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
<6>[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
<6>[    0.000000] GICv3: 640 SPIs implemented
<6>[    0.000000] GICv3: 0 Extended SPIs implemented
<6>[    0.000000] Root IRQ handler: 0xffffffc080010080
<6>[    0.000000] GICv3: GICv3 features: 16 PPIs
<6>[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
<6>[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
<6>[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
<6>[    0.000080] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
<6>[    0.000088] pid_max: default: 32768 minimum: 301
<6>[    0.002952] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
<6>[    0.002960] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
<4>[    0.005093] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.005621] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
<6>[    0.005759] rcu: Hierarchical SRCU implementation.
<6>[    0.005762] rcu:     Max phase no-delay instances is 1000.
<6>[    0.006209] smp: Bringing up secondary CPUs ...
<6>[    0.006574] Detected VIPT I-cache on CPU1
<6>[    0.006618] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
<6>[    0.006647] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
<6>[    0.006716] smp: Brought up 1 node, 2 CPUs
<6>[    0.006722] SMP: Total of 2 processors activated.
<6>[    0.006725] CPU features: detected: 32-bit EL0 Support
<6>[    0.006728] CPU features: detected: CRC32 instructions
<6>[    0.006759] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
<6>[    0.006762] CPU: All CPU(s) started at EL2
<6>[    0.006764] alternatives: applying system-wide alternatives
<6>[    0.010821] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
<6>[    0.010838] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
<6>[    0.012089] pinctrl core: initialized pinctrl subsystem
<6>[    0.013133] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.013724] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.013751] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.013771] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.014153] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.014157] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.014159] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.014162] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.014243] ASID allocator initialised with 65536 entries
<6>[    0.015164] pstore: Using crash dump compression: deflate
<6>[    0.015169] pstore: Registered ramoops as persistent store backend
<6>[    0.015171] ramoops: using 0x10000@0x42ff0000, ecc: 0
<6>[    0.016961] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
<6>[    0.022663] Modules: 29616 pages in range for non-PLT usage
<6>[    0.022671] Modules: 521136 pages in range for PLT usage
<6>[    0.023627] cryptd: max_cpu_qlen set to 1000
<5>[    0.024733] SCSI subsystem initialized
<7>[    0.024929] libata version 3.00 loaded.
<6>[    0.026468] clocksource: Switched to clocksource arch_sys_counter
<6>[    0.028789] NET: Registered PF_INET protocol family
<6>[    0.028896] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
<6>[    0.030206] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
<6>[    0.030222] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[    0.030231] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[    0.030249] TCP bind hash table entries: 2048 (order: 4, 65536 bytes, linear)
<6>[    0.030299] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    0.030609] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, linear)
<6>[    0.030710] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
<6>[    0.030726] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
<6>[    0.030984] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[    0.031017] PCI: CLS 0 bytes, default 64
<6>[    0.032270] workingset: timestamp_bits=46 max_order=16 bucket_order=0
<6>[    0.037066] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.037074] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.071818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.082274] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[    0.085883] printk: console [ttyS0] disabled
<6>[    0.106250] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2
<6>[    0.106290] printk: console [ttyS0] enabled
<6>[    0.908844] loop: module loaded
<6>[    0.915563] spi-nand spi0.0: calibration result: 0x3
<6>[    0.921147] spi-nand spi0.0: ESMT SPI NAND was found.
<6>[    0.926483] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
<5>[    0.935229] 9 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.942250] Creating 9 MTD partitions on "spi0.0":
<5>[    0.947339] 0x000000000000-0x000000100000 : "BL2"
<5>[    0.953426] 0x000000100000-0x000000140000 : "Nvram"
<5>[    0.959180] 0x000000140000-0x000000180000 : "Bdata"
<5>[    0.964897] 0x000000180000-0x000000380000 : "Factory"
<5>[    0.971917] 0x000000380000-0x000000580000 : "FIP"
<5>[    0.978329] 0x000000580000-0x0000005c0000 : "crash"
<5>[    0.984038] 0x0000005c0000-0x000000600000 : "crash_log"
<5>[    0.990181] 0x000007600000-0x000007640000 : "KF"
<5>[    0.995658] 0x000000600000-0x000007600000 : "ubi"
<5>[    1.053008] ubi0: default fastmap pool size: 40
<5>[    1.057814] ubi0: default fastmap WL pool size: 20
<5>[    1.062858] ubi0: attaching mtd8
<5>[    1.447342] ubi0: scanning is finished
<5>[    1.457426] ubi0: attached mtd8 (name "ubi", size 112 MiB)
<5>[    1.463180] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[    1.470322] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[    1.477372] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[    1.484581] ubi0: good PEBs: 896, bad PEBs: 0, corrupted PEBs: 0
<5>[    1.490840] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
<5>[    1.498313] ubi0: max/mean erase counter: 16/10, WL threshold: 4096, image sequence number: 383316457
<5>[    1.507781] ubi0: available PEBs: 0, total reserved PEBs: 896, PEBs reserved for bad PEB handling: 20
<5>[    1.517260] ubi0: background thread "ubi_bgt0d" started, PID 261
<6>[    1.517971] block ubiblock0_3: created from ubi0:3(fit)
<4>[    2.172112] an8855-switch: probe of an8855-switch.2.auto failed with error -110
<6>[    2.184740] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081780000, irq 75
<6>[    2.194750] i2c_dev: i2c /dev entries driver
<6>[    2.202199] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
<6>[    2.212024] NET: Registered PF_INET6 protocol family
<6>[    2.218276] Segment Routing with IPv6
<6>[    2.222216] In-situ OAM (IOAM) with IPv6
<6>[    2.226430] NET: Registered PF_PACKET protocol family
<6>[    2.231808] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[    2.245287] 8021q: 802.1Q VLAN Support v1.8
<6>[    2.274138] FIT: Detected U-Boot 2024.10-OpenWrt-r28563-9e63e2410d
<6>[    2.280609] FIT: Selected configuration: "config-1" (OpenWrt xiaomi_mi-router-ax3000t-ubootmod)
<6>[    2.289580] FIT:           kernel sub-image 0x00001000..0x00560e3d "kernel-1" (ARM64 OpenWrt Linux-6.6.83)
<6>[    2.299582] FIT:          flat_dt sub-image 0x00561000..0x00567e6a "fdt-1" (ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree blob)
<6>[    2.312618] FIT:       filesystem sub-image 0x00568000..0x009e3fff "rootfs-1" (ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod rootfs)
<6>[    2.325492] block ubiblock0_3: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
<6>[    2.405427] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
<6>[    2.414688] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[    2.425428] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=80)
<6>[    2.447829] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=81)
<6>[    2.470099] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=82)
<6>[    2.492371] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=83)
<6>[    2.504158] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
<6>[    2.511180] DSA: tree 0 setup
<6>[    2.514854] clk: Disabling unused clocks
<6>[    2.523331] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
<6>[    2.530925] Freeing unused kernel memory: 448K
<6>[    2.535685] Run /sbin/init as init process
<7>[    2.540041]   with arguments:
<7>[    2.543257]     /sbin/init
<7>[    2.546211]   with environment:
<7>[    2.549663]     HOME=/
<7>[    2.552272]     TERM=linux
<14>[    2.752985] init: Console is alive
<14>[    2.756940] init: - watchdog -
<14>[    3.104621] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<4>[    3.131663] gpio_button_hotplug: loading out-of-tree module taints kernel.
<14>[    3.141619] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    3.154200] init: - preinit -
<5>[    3.426500] random: crng init done
<6>[    3.482299] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[    3.491052] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[    3.523580] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
<5>[    7.721607] UBIFS (ubi0:4): Mounting in unauthenticated mode
<5>[    7.727644] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 795
<5>[    7.753103] UBIFS (ubi0:4): recovery needed
<5>[    7.855651] UBIFS (ubi0:4): recovery completed
<5>[    7.860426] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "rootfs_data"
<5>[    7.868516] UBIFS (ubi0:4): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>[    7.878680] UBIFS (ubi0:4): FS size: 87613440 bytes (83 MiB, 690 LEBs), max 701 LEBs, journal size 4444160 bytes (4 MiB, 35 LEBs)
<5>[    7.890580] UBIFS (ubi0:4): reserved for root: 4138199 bytes (4041 KiB)
<5>[    7.897445] UBIFS (ubi0:4): media format: w5/r0 (latest is w5/r0), UUID E916D81C-C680-45A1-B453-5EAA24F4675F, small LPT model
<14>[    7.911017] mount_root: switching to ubifs overlay
<4>[    7.921101] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
<15>[    7.935381] urandom-seed: Seeding with /etc/urandom.seed
<14>[    7.988096] procd: - early -
<14>[    7.991386] procd: - watchdog -
<14>[    8.540937] procd: - watchdog -
<14>[    8.544879] procd: - ubus -
<14>[    8.699280] procd: - init -
Please press Enter to activate this console.
<14>[    9.048529] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    9.088005] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
<6>[    9.113102] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
<6>[    9.120888] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
<14>[    9.220222] urngd: v1.0.2 started.
<6>[    9.530118] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823161240a
<6>[    9.530118]
<6>[    9.731325] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823161304
<6>[    9.825710] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823161841
<6>[    9.922916] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
<6>[    9.968331] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
<6>[   10.055704] PPP generic driver version 2.4.2
<6>[   10.061661] NET: Registered PF_PPPOX protocol family
<14>[   10.070648] kmodloader: done loading kernel modules from /etc/modules.d/*
<6>[   13.417964] mtk_soc_eth 15100000.ethernet eth0: Link is Down
<6>[   13.433442] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[   13.442451] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[   13.454873] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
<6>[   13.467625] br-lan: port 1(lan2) entered blocking state
<6>[   13.473119] br-lan: port 1(lan2) entered disabled state
<6>[   13.478705] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
<6>[   13.485261] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
<6>[   13.495231] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
<6>[   13.528594] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
<6>[   13.550476] br-lan: port 2(lan3) entered blocking state
<6>[   13.555974] br-lan: port 2(lan3) entered disabled state
<6>[   13.561558] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
<6>[   13.593046] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
<6>[   13.610897] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
<6>[   13.619949] br-lan: port 3(lan4) entered blocking state
<6>[   13.625443] br-lan: port 3(lan4) entered disabled state
<6>[   13.631025] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode
<6>[   13.640054] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode
<6>[   13.661227] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode
<6>[   16.636778] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   16.636806] br-lan: port 1(lan2) entered blocking state
<6>[   16.650438] br-lan: port 1(lan2) entered forwarding state
<6>[   16.835876] mt7530-mdio mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx

potem wgetem zassałem Twój openwrt-24.10-snapshot-r28529-56559278b7-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb.
sysupgrade -n /tmp/openwrt-24.10-snapshot-r28529-56559278b7-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb.... i to samo wisi, dioda pomarańczowa, uart pluje:

 Press UP/DOWN to move, ENTER to select, ESC to quit
No size specified -> Using max size (5713920)
Read 5713920 bytes from volume fit to 0000000046000000

## Checking Image at 46000000 ...
   FIT image found
   FIT description: ARM64 OpenWrt FIT (Flattened Image Tree)
    Image 0 (kernel-1)
     Description:  ARM64 OpenWrt Linux-6.6.79
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x46001000
     Data Size:    5635303 Bytes = 5.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   0debd3ed
     Hash algo:    sha1
     Hash value:   784c6123e3ee4b887251f391dd0a04db160678a9
    Image 1 (fdt-1)
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46561000
     Data Size:    28061 Bytes = 27.4 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   7df3fae3
     Hash algo:    sha1
     Hash value:   d2b14f1a27c4e0eca3b254a703386b3ea9090769
    Image 2 (rootfs-1)
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod rootfs
     Type:         Filesystem Image
     Compression:  uncompressed
     Data Start:   0x46568000
     Data Size:    0 Bytes = 0 Bytes
     Hash algo:    crc32
     Hash value:   00000000
     Hash algo:    sha1
     Hash value:   da39a3ee5e6b4b0d3255bfef95601890afd80709
    Default Configuration: 'config-1'
    Configuration 0 (config-1)
     Description:  OpenWrt xiaomi_mi-router-ax3000t-ubootmod
     Kernel:       kernel-1
     FDT:          fdt-1
     Loadables:    rootfs-1
## Checking hash(es) for FIT Image at 46000000 ...
   Hash(es) for Image 0 (kernel-1): crc32+ sha1+
   Hash(es) for Image 1 (fdt-1): crc32+ sha1+
   Hash(es) for Image 2 (rootfs-1): crc32+ sha1+
## Loading kernel from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.79
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x46001000
     Data Size:    5635303 Bytes = 5.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   0debd3ed
     Hash algo:    sha1
     Hash value:   784c6123e3ee4b887251f391dd0a04db160678a9
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x46561000
     Data Size:    28061 Bytes = 27.4 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   7df3fae3
     Hash algo:    sha1
     Hash value:   d2b14f1a27c4e0eca3b254a703386b3ea9090769
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x46561000
Working FDT set to 46561000
## Loading loadables from FIT Image at 46000000 ...
   Trying 'rootfs-1' loadables subimage
     Description:  ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod rootfs
     Type:         Filesystem Image
     Compression:  uncompressed
     Data Start:   0x46568000
     Data Size:    0 Bytes = 0 Bytes
     Hash algo:    crc32
     Hash value:   00000000
     Hash algo:    sha1
     Hash value:   da39a3ee5e6b4b0d3255bfef95601890afd80709
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Uncompressing Kernel Image to 48000000
   Loading Device Tree to 000000004e7c9000, end 000000004e7d2d9c ... OK
Working FDT set to 4e7c9000
Add 'ramoops@42ff0000' node failed: FDT_ERR_EXISTS

Starting kernel ...

<6>[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
<5>[    0.000000] Linux version 6.6.79 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28010-49d8f4b833) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Wed Mar  5 08:20:06 2025
<6>[    0.000000] Machine model: Xiaomi Mi Router AX3000T (OpenWrt U-Boot layout)
<6>[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
<6>[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
<6>[    0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000
<6>[    0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000
<6>[    0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   DMA      [mem 0x0000000040000000-0x000000004fffffff]
<6>[    0.000000]   DMA32    empty
<6>[    0.000000]   Normal   empty
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
<6>[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
<6>[    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff]
<6>[    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff]
<6>[    0.000000]   node   0: [mem 0x0000000048000000-0x000000004fffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff]
<6>[    0.000000] psci: probing for conduit method from DT.
<6>[    0.000000] psci: PSCIv1.1 detected in firmware.
<6>[    0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
<6>[    0.000000] psci: SMC Calling Convention v1.4
<6>[    0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
<7>[    0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[    0.000000] Detected VIPT I-cache on CPU0
<6>[    0.000000] CPU features: detected: GIC system register CPU interface
<6>[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
<6>[    0.000000] alternatives: applying boot alternatives
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 console_msg_format=syslog root=/dev/fit0 rootwait
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
<6>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64512
<6>[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
<6>[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
<6>[    0.000000] software IO TLB: area num 2.
<6>[    0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 0MB
<6>[    0.000000] software IO TLB: mapped [mem 0x000000004fe41000-0x000000004fec1000] (0MB)
<6>[    0.000000] Memory: 239856K/262144K available (9024K kernel code, 1000K rwdata, 1672K rodata, 448K init, 307K bss, 22288K reserved, 0K cma-reserved)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] rcu: Hierarchical RCU implementation.
<6>[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000]     Tracing variant of Tasks RCU enabled.
<6>[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
<6>[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
<6>[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
<6>[    0.000000] GICv3: 640 SPIs implemented
<6>[    0.000000] GICv3: 0 Extended SPIs implemented
<6>[    0.000000] Root IRQ handler: 0xffffffc080010080
<6>[    0.000000] GICv3: GICv3 features: 16 PPIs
<6>[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
<6>[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
<6>[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
<6>[    0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
<6>[    0.000087] pid_max: default: 32768 minimum: 301
<6>[    0.002996] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
<6>[    0.003003] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
<4>[    0.005160] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.005697] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
<6>[    0.005837] rcu: Hierarchical SRCU implementation.
<6>[    0.005840] rcu:     Max phase no-delay instances is 1000.
<6>[    0.006279] smp: Bringing up secondary CPUs ...
<6>[    0.006645] Detected VIPT I-cache on CPU1
<6>[    0.006688] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
<6>[    0.006718] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
<6>[    0.006786] smp: Brought up 1 node, 2 CPUs
<6>[    0.006791] SMP: Total of 2 processors activated.
<6>[    0.006794] CPU features: detected: 32-bit EL0 Support
<6>[    0.006798] CPU features: detected: CRC32 instructions
<6>[    0.006831] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
<6>[    0.006834] CPU: All CPU(s) started at EL2
<6>[    0.006836] alternatives: applying system-wide alternatives
<6>[    0.010857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
<6>[    0.010873] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
<6>[    0.012123] pinctrl core: initialized pinctrl subsystem
<6>[    0.013166] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.013754] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.013781] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.013802] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.014190] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.014194] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.014196] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.014199] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.014280] ASID allocator initialised with 65536 entries
<6>[    0.015196] pstore: Using crash dump compression: deflate
<6>[    0.015201] pstore: Registered ramoops as persistent store backend
<6>[    0.015203] ramoops: using 0x10000@0x42ff0000, ecc: 0
<6>[    0.016964] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
<6>[    0.022688] Modules: 29616 pages in range for non-PLT usage
<6>[    0.022696] Modules: 521136 pages in range for PLT usage
<6>[    0.023655] cryptd: max_cpu_qlen set to 1000
<5>[    0.024759] SCSI subsystem initialized
<7>[    0.024963] libata version 3.00 loaded.
<6>[    0.026502] clocksource: Switched to clocksource arch_sys_counter
<6>[    0.028699] NET: Registered PF_INET protocol family
<6>[    0.028802] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
<6>[    0.030144] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
<6>[    0.030162] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[    0.030171] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[    0.030188] TCP bind hash table entries: 2048 (order: 4, 65536 bytes, linear)
<6>[    0.030238] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    0.030560] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, linear)
<6>[    0.030663] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
<6>[    0.030690] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
<6>[    0.030956] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[    0.030981] PCI: CLS 0 bytes, default 64
<6>[    0.032339] workingset: timestamp_bits=46 max_order=16 bucket_order=0
<6>[    0.037141] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.037148] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.070185] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.080790] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[    0.084400] printk: console [ttyS0] disabled
<6>[    0.104785] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2
<6>[    0.104826] printk: console [ttyS0] enabled
<6>[    0.907524] loop: module loaded
<6>[    0.913296] spi-nand spi0.0: ESMT SPI NAND was found.
<6>[    0.918641] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
<5>[    0.927441] 9 fixed-partitions partitions found on MTD device spi0.0
<5>[    0.934303] Creating 9 MTD partitions on "spi0.0":
<5>[    0.939397] 0x000000000000-0x000000100000 : "BL2"
<5>[    0.945406] 0x000000100000-0x000000140000 : "Nvram"
<5>[    0.951156] 0x000000140000-0x000000180000 : "Bdata"
<5>[    0.956917] 0x000000180000-0x000000380000 : "Factory"
<5>[    0.963951] 0x000000380000-0x000000580000 : "FIP"
<5>[    0.970342] 0x000000580000-0x0000005c0000 : "crash"
<5>[    0.976069] 0x0000005c0000-0x000000600000 : "crash_log"
<5>[    0.982191] 0x000007600000-0x000007640000 : "KF"
<5>[    0.987682] 0x000000600000-0x000007600000 : "ubi"
<5>[    1.046373] ubi0: default fastmap pool size: 40
<5>[    1.051191] ubi0: default fastmap WL pool size: 20
<5>[    1.056234] ubi0: attaching mtd8
<5>[    1.442986] ubi0: scanning is finished
<5>[    1.453269] ubi0: attached mtd8 (name "ubi", size 112 MiB)
<5>[    1.459038] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[    1.466162] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[    1.473201] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[    1.480417] ubi0: good PEBs: 896, bad PEBs: 0, corrupted PEBs: 0
<5>[    1.486675] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
<5>[    1.494143] ubi0: max/mean erase counter: 16/10, WL threshold: 4096, image sequence number: 383316457
<5>[    1.503609] ubi0: available PEBs: 0, total reserved PEBs: 896, PEBs reserved for bad PEB handling: 20
<5>[    1.513084] ubi0: background thread "ubi_bgt0d" started, PID 264
<6>[    1.519982] block ubiblock0_3: created from ubi0:3(fit)
<4>[    2.172056] an8855-switch: probe of an8855-switch.2.auto failed with error -110
<6>[    2.184673] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081700000, irq 75
<6>[    2.194681] i2c_dev: i2c /dev entries driver
<6>[    2.201819] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
<6>[    2.211611] NET: Registered PF_INET6 protocol family
<6>[    2.217959] Segment Routing with IPv6
<6>[    2.221899] In-situ OAM (IOAM) with IPv6
<6>[    2.226122] NET: Registered PF_PACKET protocol family
<6>[    2.231483] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[    2.244945] 8021q: 802.1Q VLAN Support v1.8
<6>[    2.270797] FIT: Detected U-Boot 2024.10-OpenWrt-r28563-9e63e2410d
<6>[    2.277263] FIT: Selected configuration: "config-1" (OpenWrt xiaomi_mi-router-ax3000t-ubootmod)
<6>[    2.286221] FIT:           kernel sub-image 0x00001000..0x00560ce6 "kernel-1" (ARM64 OpenWrt Linux-6.6.79)
<6>[    2.296234] FIT:          flat_dt sub-image 0x00561000..0x00567d9c "fdt-1" (ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree blob)
<6>[    2.380829] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
<6>[    2.390090] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[    2.400831] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=80)
<6>[    2.423291] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=81)
<6>[    2.445556] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=82)
<6>[    2.467836] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=83)
<6>[    2.479634] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
<6>[    2.486652] DSA: tree 0 setup
<6>[    2.490225] clk: Disabling unused clocks
<6>[    2.494870] Waiting for root device /dev/fit0...
Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,127 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

4 osoby przyznały sie w statystykach do używania tego dokładnie obrazu. Więc ciekawe dlaczego tak się dzieje w tym przypadku.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,128 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Od lat uzywam Twoich obrazów na różnych routerach nigdy nie było problemu.
Pierwszy sysuprade aktualnego obrazu robiłem mając zainstalowany Twój poprzedni obraz z pierwszego marca i wtedy zawisł poraz  pierwszy.
Nie chcę używać oficjalnych obrazów.....chcę Twoje....nie wiem co robić.Help!

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,129 Odpowiedź przez schrederek

  • Zarejestrowany: 2017-05-29
  • Posty: 25

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

er2de2 napisał/a:

potem wgetem zassałem Twój openwrt-24.10-snapshot-r28529-56559278b7-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb.
sysupgrade -n /tmp/openwrt-24.10-snapshot-r28529-56559278b7-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb.... i to samo wisi,

jestem nowicjuszem ale...do aktualizacji nie powinien być plik https://dl.eko.one.pl/luci/openwrt-24.1 … pgrade.bin o ile ma byc luci
albo https://dl.eko.one.pl/openwrt-24.10/tar … pgrade.bin  bez luci
???

1,130 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Nie powinno być bo kolega ma uboot mod.

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

1,131 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Cezary napisał/a:

4 osoby przyznały sie w statystykach do używania tego dokładnie obrazu. Więc ciekawe dlaczego tak się dzieje w tym przypadku.

Przywróciłem router do życia obrazem z oficjalnego OpenWrt, poczekam na Twój następny build i spróbuje ponownie.
Czy ma to sens nie wiem.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,132 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Nie zrobiłem wiele ax3000t- może 10 w sumie, ale pierwszy raz widzę takie zachowanie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,133 Odpowiedź przez er2de2 (edytowany przez er2de2 2025-03-20 14:55:30)

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Ja też jestem zdziwiony. Upgrade robiłem w niedzielę,router zdechł, pomyślałem,że może zassałem sysupgrade bez ubootmod,że się pomyliłem.
Panika w domu brak neta,na szybko podłączyłem router od operatora i od tego czasu walczę z tym xiaomi.
Problem z cyklu "nie do wiary".

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,134 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Może ma ktoś na dysku kopię obrazu Cezarego z pierwszego marca openwrt-24.10-snapshot-r28521-f3a210b742-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb.?

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,135 Odpowiedź przez er2de2 (edytowany przez er2de2 2025-03-21 08:44:17)

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Cezary update do najnowszego Twojego obrazu z LUCI przechodzi gładko jak po masełku.
Laik ze mnie, może coś jest nie halo z obrazem konsolowym.

BusyBox v1.36.1 (2025-01-04 10:56:06 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------------------------------
 |                                                                           |
 | OpenWrt 24.10-SNAPSHOT, r28529-56559278b7                                 |
 |                                                                           |
 | Build time: 2025-03-05 16:51 UTC                                          |
 | Cezary Jackiewicz, https://eko.one.pl                                     |
 |                                                                           |
 -----------------------------------------------------------------------------
 | Machine: Xiaomi Mi Router AX3000T (OpenWrt U-Boot layout)                 |
 | Uptime: 0d, 00:02:10                                                      |
 | Load: 0.10 0.10 0.04                                                      |
 | Flash: total: 74.8MB, free: 70.9MB, used: 0%                              |
 | Memory: total: 234.7MB, free: 160.5MB, used: 31%                          |
 | Leases: 1                                                                 |
 | lan: static, 192.168.1.1                                                  |
 | wan: dhcp, ?                                                              |
 | wan6: dhcpv6, ?                                                           |
 -----------------------------------------------------------------------------
 | CPU temp: 48.85 C                                                         |
 | Wi-Fi chip temp: 28.00 C, 28.00 C                                         |
 -----------------------------------------------------------------------------
 === WARNING! ================================================================
 There is no root password defined on this device!
 Use the "passwd" command to set up a new password
 in order to prevent unauthorized SSH logins.
 -----------------------------------------------------------------------------

Edit:
Próba wgrania obrazu bez Luci "tradycyjnie" powiesiła router smile

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,136 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Wgraj z luci, wywal pakiety do luci, zainstaluj owuta, zmien serwer aktualizcji na sysupgrade.eko.one.pl i niech zbuduje ci obraz na podstawie tego co masz zainstalowane. Jak się uruchomi poprawnie to naprawdę będą cuda.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,137 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Zrobiłem jak napisałeś.
Wywaliłem wszystko co miało w nazwie luci, potem owut i... uwierzyłem w cuda smile

BusyBox v1.36.1 (2025-01-04 10:56:06 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------------------------------
 |                                                                           |
 | OpenWrt 24.10-SNAPSHOT, r28529-56559278b7                                 |
 |                                                                           |
 | Build time: 2025-03-05 16:51 UTC                                          |
 | Cezary Jackiewicz, https://eko.one.pl                                     |
 |                                                                           |
 -----------------------------------------------------------------------------
 | Machine: Xiaomi Mi Router AX3000T (OpenWrt U-Boot layout)                 |
 | Uptime: 0d, 00:00:48                                                      |
 | Load: 0.30 0.09 0.03                                                      |
 | Flash: total: 75.9MB, free: 71.9MB, used: 0%                              |
 | Memory: total: 234.7MB, free: 162.3MB, used: 30%                          |
 | Leases: 0                                                                 |
 | lan: static, 192.168.1.1                                                  |
 | wan: dhcp, 192.168.2.102                                                  |
 | wan6: dhcpv6, ?                                                           |
 -----------------------------------------------------------------------------
 | CPU temp: 41.86 C                                                         |
 | Wi-Fi chip temp: 21.00 C, 21.00 C                                         |
 -----------------------------------------------------------------------------
 === WARNING! ================================================================
 There is no root password defined on this device!
 Use the "passwd" command to set up a new password
 in order to prevent unauthorized SSH logins.
 -----------------------------------------------------------------------------
root@OpenWrt:~# opkg list-installed
attendedsysupgrade-common - 10
backupandrestore-opkg - 20241128
base-files - 250305.30006~56559278b7
busybox - 1.36.1-r2
ca-bundle - 20240203-r1
ddns-scripts - 2.8.2-r64
ddns-scripts-noip - 2.8.2-r64
ddns-scripts-services - 2.8.2-r64
dnsmasq - 2.90-r4
dropbear - 2024.86-r1
eip197-mini-firmware - 20241110-r1
ekooneplconfigs - 20250212
ekooneplstat - 20150706
firewall4 - 2024.12.18~18fc0ead-r1
fitblk - 2
fstools - 2024.07.14~408c2cc4-r1
fwtool - 2019.11.12~8f7fe925-r1
getrandom - 2024.04.26~85f10530-r1
hostapd-common - 2024.09.15~5ace39b0-r2
ip-tiny - 6.11.0-r1
iw - 6.9-r1
iwinfo - 2024.10.20~b94f066e-r1
jansson4 - 2.14-r3
jshn - 2024.03.29~eb9bcb64-r1
jsonfilter - 2024.01.23~594cfa86-r1
kernel - 6.6.79~328c0b56e8b041f6b23ece8be2a5e074-r1
kmod-asn1-decoder - 6.6.79-r1
kmod-cfg80211 - 6.6.79.6.12.6-r1
kmod-crypto-acompress - 6.6.79-r1
kmod-crypto-aead - 6.6.79-r1
kmod-crypto-authenc - 6.6.79-r1
kmod-crypto-ccm - 6.6.79-r1
kmod-crypto-cmac - 6.6.79-r1
kmod-crypto-crc32c - 6.6.79-r1
kmod-crypto-ctr - 6.6.79-r1
kmod-crypto-des - 6.6.79-r1
kmod-crypto-gcm - 6.6.79-r1
kmod-crypto-geniv - 6.6.79-r1
kmod-crypto-gf128 - 6.6.79-r1
kmod-crypto-ghash - 6.6.79-r1
kmod-crypto-hash - 6.6.79-r1
kmod-crypto-hmac - 6.6.79-r1
kmod-crypto-hw-safexcel - 6.6.79-r1
kmod-crypto-kpp - 6.6.79-r1
kmod-crypto-lib-chacha20 - 6.6.79-r1
kmod-crypto-lib-chacha20poly1305 - 6.6.79-r1
kmod-crypto-lib-curve25519 - 6.6.79-r1
kmod-crypto-lib-poly1305 - 6.6.79-r1
kmod-crypto-manager - 6.6.79-r1
kmod-crypto-md5 - 6.6.79-r1
kmod-crypto-null - 6.6.79-r1
kmod-crypto-rng - 6.6.79-r1
kmod-crypto-seqiv - 6.6.79-r1
kmod-crypto-sha1 - 6.6.79-r1
kmod-crypto-sha256 - 6.6.79-r1
kmod-crypto-sha3 - 6.6.79-r1
kmod-crypto-sha512 - 6.6.79-r1
kmod-gpio-button-hotplug - 6.6.79-r5
kmod-hwmon-core - 6.6.79-r1
kmod-leds-gpio - 6.6.79-r1
kmod-lib-crc-ccitt - 6.6.79-r1
kmod-lib-crc32c - 6.6.79-r1
kmod-lib-lzo - 6.6.79-r1
kmod-lib-textsearch - 6.6.79-r1
kmod-libphy - 6.6.79-r1
kmod-mac80211 - 6.6.79.6.12.6-r1
kmod-mt76-connac - 6.6.79.2025.02.14~e5fef138-r1
kmod-mt76-core - 6.6.79.2025.02.14~e5fef138-r1
kmod-mt7915e - 6.6.79.2025.02.14~e5fef138-r1
kmod-mt7981-firmware - 6.6.79.2025.02.14~e5fef138-r1
kmod-nf-conntrack - 6.6.79-r1
kmod-nf-conntrack-netlink - 6.6.79-r1
kmod-nf-conntrack6 - 6.6.79-r1
kmod-nf-flow - 6.6.79-r1
kmod-nf-log - 6.6.79-r1
kmod-nf-log6 - 6.6.79-r1
kmod-nf-nat - 6.6.79-r1
kmod-nf-nathelper - 6.6.79-r1
kmod-nf-nathelper-extra - 6.6.79-r1
kmod-nf-reject - 6.6.79-r1
kmod-nf-reject6 - 6.6.79-r1
kmod-nfnetlink - 6.6.79-r1
kmod-nft-core - 6.6.79-r1
kmod-nft-fib - 6.6.79-r1
kmod-nft-nat - 6.6.79-r1
kmod-nft-offload - 6.6.79-r1
kmod-ovpn-dco-v2 - 6.6.79.0.2.20240320-r1
kmod-phy-aquantia - 6.6.79-r1
kmod-ppp - 6.6.79-r1
kmod-pppoe - 6.6.79-r1
kmod-pppox - 6.6.79-r1
kmod-slhc - 6.6.79-r1
kmod-thermal - 6.6.79-r1
kmod-tun - 6.6.79-r1
kmod-udptunnel4 - 6.6.79-r1
kmod-udptunnel6 - 6.6.79-r1
libblobmsg-json20240329 - 2024.03.29~eb9bcb64-r1
libc - 1.2.5-r4
libcap-ng - 0.8.4-r1
libgcc1 - 13.3.0-r4
libiwinfo-data - 2024.10.20~b94f066e-r1
libiwinfo20230701 - 2024.10.20~b94f066e-r1
libjson-c5 - 0.18-r1
libjson-script20240329 - 2024.03.29~eb9bcb64-r1
liblua5.1.5 - 5.1.5-r11
liblz4-1 - 1.10.0-r1
libmbedtls21 - 3.6.2-r1
libmnl0 - 1.0.5-r1
libncurses6 - 6.4-r2
libnftnl11 - 1.2.8-r1
libnl-core200 - 3.10.0-r1
libnl-genl200 - 3.10.0-r1
libnl-tiny1 - 2025.03.19~c0df580a-r1
libpthread - 1.2.5-r4
libreadline8 - 8.2-r2
libubox20240329 - 2024.03.29~eb9bcb64-r1
libubus-lua - 2025.01.02~afa57cce-r1
libubus20250102 - 2025.01.02~afa57cce-r1
libuci20250120 - 2025.01.20~16ff0bad-r1
libuclient20201210 - 2024.10.22~88ae8f20-r1
libucode20230711 - 2025.02.10~a8a11aea-r1
libudebug - 2023.12.06~6d3f51f9
libustream-mbedtls20201210 - 2024.07.28~99bd3d2b-r1
logd - 2024.04.26~85f10530-r1
lua - 5.1.5-r11
mt7981-wo-firmware - 20241110-r1
mtd - 26
netifd - 2024.12.17~ea01ed41-r1
nftables-json - 1.1.1-r1
odhcp6c - 2024.09.25~b6ae9ffa-r1
odhcpd-ipv6only - 2024.05.08~a2988231-r1
openvpn-mbedtls - 2.6.13-r1
openwrt-keyring - 2024.11.01~fbae29d7-r2
opkg - 2024.10.16~38eccbb1-r1
owut - 2025.03.14~52e7d44c-r1
ppp - 2.5.1-r1
ppp-mod-pppoe - 2.5.1-r1
procd - 2024.12.22~42d39376-r1
procd-seccomp - 2024.12.22~42d39376-r1
procd-ujail - 2024.12.22~42d39376-r1
px5g-mbedtls - 11
relayd - 2023.01.28~f646ba40-r1
resolveip - 2
rpcd - 2024.09.17~9f4b86e7-r1
rpcd-mod-file - 2024.09.17~9f4b86e7-r1
rpcd-mod-iwinfo - 2024.09.17~9f4b86e7-r1
rpcd-mod-rpcsys - 2024.09.17~9f4b86e7-r1
sysinfo - 20210313
terminfo - 6.4-r2
ubi-utils - 2.2.1-r1
uboot-envtools - 2024.07-r1
ubox - 2024.04.26~85f10530-r1
ubus - 2025.01.02~afa57cce-r1
ubusd - 2025.01.02~afa57cce-r1
uci - 2025.01.20~16ff0bad-r1
uclient-fetch - 2024.10.22~88ae8f20-r1
ucode - 2025.02.10~a8a11aea-r1
ucode-mod-fs - 2025.02.10~a8a11aea-r1
ucode-mod-nl80211 - 2025.02.10~a8a11aea-r1
ucode-mod-rtnl - 2025.02.10~a8a11aea-r1
ucode-mod-ubus - 2025.02.10~a8a11aea-r1
ucode-mod-uci - 2025.02.10~a8a11aea-r1
ucode-mod-uclient - 2024.10.22~88ae8f20-r1
ucode-mod-uloop - 2025.02.10~a8a11aea-r1
uhttpd - 2023.06.25~34a8a74d-r4
uhttpd-mod-ubus - 2023.06.25~34a8a74d-r4
urandom-seed - 3
urngd - 2023.11.01~44365eb1-r1
usign - 2020.05.23~f1f65026-r1
wifi-scripts - 1.0-r1
wireless-regdb - 2025.02.20-r1
wpad-basic-mbedtls - 2024.09.15~5ace39b0-r2

Router łyknął bez problemu obraz z owuta.
Czekam niecierpliwie na Twój kolejny snapshot smile
Dziękuję za pomoc!

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,138 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

A cuda dlatego że to powstaje z tego samego przebiegu co czysty obraz bez luci (w następnym przebiegu z tego powstaje obraz z luci po dołożeniu pakietów specyficznych dla luci). Więc ten teges...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,139 Odpowiedź przez PanPaputek

  • Zarejestrowany: 2024-12-19
  • Posty: 10

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Nlbwmon przy hardware offload działa mi tylko na interfejsie lan, co jest bez sensu dla zliczania użycia internetu. Czy instalacja vnstat2, który ma zbierać tez na eth0 nie rozwali mi routera?

1,140 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Przy offloadingu większość monitorów będzie źle działała, właśnie dlatego że offloading omija większość liczników.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,141 Odpowiedź przez PanPaputek

  • Zarejestrowany: 2024-12-19
  • Posty: 10

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Do tego przy tunelu pppoe to zupełnie trudno. Ale nlbwmon zbiera totalne bzdury (zawyża transfery nawet 10x) a vnstat coś tam pozwala zobaczyć, jest oparty o inne mechanizmy. W każdym razie, przynajmniej pokazuje mi realistyczny download, bo upload jestem pewien w przekłamuje (przy oglądaniu netflixa na tv pokazuje upload~download, co raczej nie ma miejsca w rzeczywistości).

1,142 Odpowiedź przez janusz07

  • Zarejestrowany: 2019-03-03
  • Posty: 176

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

przy zyxel t-56 nawet przy wlączonym offloading HW wszystko pięknie zlicza.
https://i.ibb.co/1t9Yc0ZJ/Zrzut-ekranu-23-3-2025-114354-192-168-1-1.jpg

1,143 Odpowiedź przez PanPaputek (edytowany przez PanPaputek 2025-03-23 12:21:41)

  • Zarejestrowany: 2024-12-19
  • Posty: 10

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

A który interfejs słucha? U mnie na wan i na wan-pppoe niemal żadnego ruchu nie rejestruje. Po wyłączeniu hw off zlicza pięknie, ale za to prędkość spada z 1Gbps do 500Mbps, więc tak nie zostanie. Po włączeniu hw off tylko vnstat, ale tylko na interfejsie eth0 i br-lan (którego słuchać nie mam po co). A przy eth0 pojawiają się kwiatki takie jak ten:
https://i.ibb.co/HfNpwGWj/IMG-2904.jpg

99% ruchu generuje tu tv z netflixem.

1,144 Odpowiedź przez bszmyd

  • bszmyd
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2025-03-22
  • Posty: 6

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Czesc
Mam zainstalowana wersje 24.10 Cezarego. Powiedzcie mi prosze czy da sie zmienic domyslny bootloader na OpenWrt U-Boot wg tego opisu: https://openwrt.org/inbox/toh/xiaomi/ax3000t ? czy trzeba przywrocic oryginalny firmware ? Sa wersje uboot Cezarego ? Ja do tej pory Asusy, Netgeary i Tomato, wiec prosze o wyrozumialosc.
Dzieki
Bogdan

1,145 Odpowiedź przez MiG25 (edytowany przez MiG25 2025-03-25 20:23:55)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,795

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Zmienia się na uboot-mod mając już openwrt , więc do stocka nie trzeba wracać , tylko zacząć stąd:
https://openwrt.org/inbox/toh/xiaomi/ax … wrt_u-boot

EDIT: Tylko może wcześniej porobić backupy wszystkich partycji...

1,146 Odpowiedź przez bszmyd

  • bszmyd
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2025-03-22
  • Posty: 6

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Dzieki, dam rade.

1,147 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Wgrałem najnowszy build Cezarego bez problemu.
Zauważyłem, że sysupgrade z 6 marca ważył 5,5MB a najnowszy 9,6.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

1,148 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Nic się nie zmieniło w obrazach, musiałeś porównywać dwa inne po prostu

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

1,149 Odpowiedź przez kamyrdol32

  • Zarejestrowany: 2025-04-04
  • Posty: 6

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Cześć, nie sądziłem że bede musiał tworzyc tutaj komentarz ale potrzebuje waszej pomocy. Przeczytałem praktycznie wszystkie komentarze, testowałem rozne sposoby ale poległem. Uwaliłem U-Boot'a i nie moge poradzic sobie z wgraniem nowego.

Moj AX3000T:
- MT7981
- 1.0.84 (Miałem juz wcześniej na nim OpenWRT ale coś sobie uszkodziłem i potrzebuje wgrac wszystko od 0)
- Winband
- RD03

W głównej mierze korzystałem z tego polecanego przez was poradnika: https://forum.openwrt.org/t/openwrt-sup … 180490/420

Wszystko działa do czasu az TFTP pobierze plik i zatrzymuje sie na "platform fitbik: deffereed probe pending" (SS)

SS: https://drive.google.com/file/d/11Hfmw5 … sp=sharing

Korzystałem z BL31, BL2 oraz ITB z poradnika. Uznałem ze może wymagana jest inna wersja ze względu ze to jest Windband, wiec przetestowałem pliki BL31 i ITP w wersji 23 oraz 24 (openwrt / immportalOpenWRT itp) i nadal nie udało sie. Aplikacja kończyła żywot na:

ERROR: reserving fdt memory region failed (addr=4fc00000 size=100000 flags=4)

Juz powiem szczerze pogubiłem się, nie mam dużego doświadczenia z tego typu czynnościami. Jakie pliki powinienem użyć w moim przypadku, BL2 powinienem zmieniać czy cały czas korzystać z tego z poradnika?

1,150 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,006

Odp: Xiaomi AX3000T - kiedy wsparcie na eko.one.pl?

Jak klepniesz enter to dalej nic nie ma?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona