Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Sprzęt / Hardware → ZTE MF286R - OpenWrt
Strony Poprzednia 1 … 16 17 18 19 20 … 50 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
Bo tymi diodami steruje sam modem , bez większego udziału routera ( choć jakoś Nightmode można zrobić) , stąd się palą ,jak tylko modem ma SIM , i udało mu się połączyć z siecią.
Bo modem zyje własnym zyciem
Po wpisaniu konfiguracji
config interface 'wan'
option proto '3g'
option device '/dev/ttyACM0'
option apn 'darmowy'
świeci 3g/4g na niebiesko i raz na jakiś czas zielono
ed Mar 16 16:50:25 2022 daemon.notice netifd: Interface 'wan' is now down
Wed Mar 16 16:50:25 2022 daemon.notice netifd: Interface 'wan' is setting up now
Wed Mar 16 16:50:27 2022 daemon.notice pppd[4792]: pppd 2.4.8 started by root, uid 0
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: abort on (BUSY)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: abort on (NO CARRIER)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: abort on (ERROR)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: report (CONNECT)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: timeout set to 10 seconds
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: send (AT&F^M)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: expect (OK)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: AT&F^M^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: OK
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: -- got it
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: send (ATE1^M)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: expect (OK)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: OK
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: -- got it
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: timeout set to 30 seconds
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: expect (OK)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: AT+CGDCONT=1,"IP","darmowy"^M^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: OK
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: -- got it
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: send (ATD*99***1#^M)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: expect (CONNECT)
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: ATD*99***1#^M^M
Wed Mar 16 16:50:28 2022 local2.info chat[4840]: OK^M
Wed Mar 16 16:50:30 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:30 2022 local2.info chat[4840]: +CUSD: 2,"0055006E00650078007000650063007400650064002000440061007400610020005600
Wed Mar 16 16:50:30 2022 local2.info chat[4840]: 61006C00750065", 17^M
Wed Mar 16 16:50:30 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:30 2022 local2.info chat[4840]: +ZNITZ: 2022,03,21,12,49,07,0,0^M
Wed Mar 16 16:50:32 2022 local2.info chat[4840]: ^M
Wed Mar 16 16:50:32 2022 local2.info chat[4840]: +ZNITZ: 2022,03,21,12,49,09,0,0^M
Kluczem zawsze jest czy miga ci lampka WWAN.
chodzi o 3g/4g
tak próbuje coś załapać i zmienia kolor z niebieskiego na zielony
i odświeża pasek poziomu sygnału ale nie tworzy interfejsu
czy układ partycji jest prawidłowy
root@OpenWrt:/# cat /proc/mtd
dev: size erasesize name
mtd0: 000a0000 00020000 "fota-flag"
mtd1: 00080000 00020000 "art"
mtd2: 00080000 00020000 "mac"
mtd3: 01660000 00020000 "ubiconcat0"
mtd4: 00400000 00020000 "kernel"
mtd5: 06400000 00020000 "ubiconcat1"
mtd6: 000a0000 00010000 "u-boot"
mtd7: 00020000 00010000 "u-boot-env"
mtd8: 00140000 00010000 "reserved1"
mtd9: 07a60000 00020000 "ubi"
A co ma być nieprawidłowego? Przecież Ci działa i się uruchomił.
Modem Ci nie będzie działał, nie będzie transmisji. Ledy migają, kolorami oznaczone są poszczególne tryby pracy, ale to jest związane jak modem łapie sygnał operatora a nie czy masz czy nie transmisję.
config interface 'wan'
option proto 'ncm'
option device '/dev/ttyACM0'
option apn 'darmowy'
to otrzymuję (miga na niebiesko wan ale brak utworzonych interfejsów )
Wed Mar 16 17:18:16 2022 daemon.notice netifd: wan (21609): ls: /sys/devices/platform/ahb/1b000000.usb/usb1/1-1/1-1:1.2/../../*/net: No such file or directory
Wed Mar 16 17:18:19 2022 daemon.notice netifd: wan (21609): sending -> AT+CFUN=1
Wed Mar 16 17:18:19 2022 daemon.notice netifd: wan (21609): Configuring modem
Wed Mar 16 17:18:19 2022 daemon.notice netifd: wan (21609): sending -> AT+ZGDCONT=1,"IP","darmowy","",0,0
Wed Mar 16 17:18:21 2022 daemon.notice netifd: wan (21609): sending -> AT+ZGPCOAUTH=1,"","",0
Wed Mar 16 17:18:21 2022 daemon.notice netifd: wan (21609): Starting network wan
Wed Mar 16 17:18:21 2022 daemon.notice netifd: wan (21609): Connecting modem
Tak i na tym modemie nie dochodzi do połączenia. Już nie wiem który raz Ci to napisałem. Masz sprzęt z modemem który nie działa.
Wiem testuję różne ustawienia
@Leo-PL - jak się wymienimy kluczami do wireguard.
Skonfigurował bym u siebie i podłączył pod wan router
@Leo-PL router ma openwrt i podłączony do sieci, teraz tylko zestawić łącze do Ciebie.
Napisałem maila ;-)
wysłałem odp. 
Ok, dostałem się. Będę się bawić jutro, dziś już mam dość i muszę odespać.
@Cezary, czy Twoje aktualne buildy zawierają tego patcha na RNDIS z forum.openwrt.org?
Tak, tylko do MF286R. Normalnie dla innych obrazów on nie jest zrobiony.
Informacyjnie - na kernelu 5.10 z 22.03 modem nadal nie działa. Z łatką jeszcze nie wiem - muszę najpierw to wszystko skompilować.
@Leo-PL miałeś czas zerknąć mój modem od R?
Question: would it be -relatively- safe to install the TMO-PL software (using the tftp method, with root_uImage)?
I would like to test band aggregation and/or bridge mode, which are not available with my operator's software.
@Leo-PL miałeś czas zerknąć mój modem od R?
Jeszcze nie, wskoczyły chwilowo ważniejsze tematy.
Also, I have a question on band lock and aggregation. Locking command for a single band works great, no issue.
I used AT+ZNLOCKBAND=1,0,40,0 to lock to Band 7. The band lock is retained on reboot or power-off, so that is also good.
Coming back to this, does anyone know if intra-band CA can be configured? For example B7+B7 band.
I have tried AT+ZNLOCKBAND=1,0,80,0 but of course this is not working, as it connects me to GSM (2G) network.
Is it possible to configure such a mask?
I have been also trying with AT*BAND command, which returns an output for B7+B20 CA:
*BAND: 6, 10, 129, 0, 524352, 0, 2, 2, 0, 0
but I have not yet found the syntax on how to configure the band through this command.
My MF286R:
at+znlockband=1,0,41,0
OK
at+znlockband?
+ZNLOCKBAND: 41,2000000680380
OKB1 + B7. It works.
For inter-band I can do it too, I have configured B7 + B20 successfully with AT + ZNLOCKBAND = 1,0,80040,0
But is it possible to configure B7 + B7? (I think it is also called CA_7B)
I have read somewhere that the modem supports it, but I can't find it now.
Also, does your modem support the AT + ZULCA command? I get error in every syntax that I have tried.
I don't know. This is not valid CA in Poland.
No, ZULCA is for MF286D.
Siedzę i przeglądam log z włączenia połączenia LTE na oryginalnym oprogramowaniu:
Mam coś takiego może w czymś pomoże:
OnConnectSuccess
RECONNECT_NEW:OnConnectSuccess
RECONNECT_NEW:connected Rndis_RecordTime:Sun Mar 20 00:48:01 2022
Adapter index 6
MAC da:76:63:dd:ab:3d
udhcpc (v1.19.4) started
Executing /etc_ro/udhcpc.sh deconfig
interface=usb0
Entering listen mode: raw
Opening raw socket on ifindex 6
Got raw socket fd 8
Attached filter to raw socket fd 8
Created raw socket
Adapter index 6
MAC da:76:63:dd:ab:3d
Adapter index 6
MAC da:76:63:dd:ab:3d
Adding option: 0x35 01
Adding option: 0x3d 01da7663ddab3d
Adding option: 0x39 0240
Adding option: 0x3c 756468637020312e31392e34
Sending discover...
hlen 6 xid 7714dd23 ciaddr 0 yiaddr 0 siaddr 0 giaddr 0
chaddr da7663ddab3d00000000000000000000
Adapter index 6
MAC da:76:63:dd:ab:3d
Waiting on select...
[ 96.300000]
[ 96.300000] /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/zte_genl_kernel-1.0/zte_genl_kernel_main.c[197]: INFO:Recv from userspace: [1]
Adapter index 6
MAC da:76:63:dd:ab:3d
Adding option: 0x35 01
Adding option: 0x3d 01da7663ddab3d
Adding option: 0x39 0240
Adding option: 0x3c 756468637020312e31392e34
Sending discover...
hlen 6 xid 7714dd23 ciaddr 0 yiaddr 0 siaddr 0 giaddr 0
chaddr da7663ddab3d00000000000000000000
Adapter index 6
MAC da:76:63:dd:ab:3d
Waiting on select...
Got valid DHCP packet
hlen 6 xid 7714dd23 ciaddr 0 yiaddr 6452fd35 siaddr 6452fdca giaddr 0
chaddr da7663ddab3d00000000000000000000
Option found: 0x35 02
Option found: 0x36 6452fdca
Adapter index 6
MAC da:76:63:dd:ab:3d
Adapter index 6
MAC da:76:63:dd:ab:3d
Adding option: 0x35 03
Adding option: 0x3d 01da7663ddab3d
Adding option: 0x32 6452fd35
Adding option: 0x36 6452fdca
Adding option: 0x39 0240
Adding option: 0x3c 756468637020312e31392e34
Sending select for 100.82.253.53...
hlen 6 xid 7714dd23 ciaddr 0 yiaddr 0 siaddr 0 giaddr 0
chaddr da7663ddab3d00000000000000000000
Adapter index 6
MAC da:76:63:dd:ab:3d
Waiting on select...
Got valid DHCP packet
hlen 6 xid 7714dd23 ciaddr 0 yiaddr 6452fd35 siaddr 6452fdca giaddr 0
chaddr da7663ddab3d00000000000000000000
Option found: 0x35 05
Option found: 0x33 00001c20
Lease of 100.82.253.53 obtained, lease time 7200
Option found: 0x01 ffffff00
Option found: 0x03 6452fdca
Option found: 0x06 d4026034d4027ffe
Option found: 0x0f 6c616e
Option found: 0x1c 6452fdff
Option found: 0x33 00001c20
Option found: 0x35 05
Option found: 0x36 6452fdca
Option found: 0x3a 00000e10
Option found: 0x3b 0000189c
Option found: 0x01 ffffff00
Option found: 0x03 6452fdca
Option found: 0x06 d4026034d4027ffe
Option found: 0x0f 6c616e
Option found: 0x1c 6452fdff
Option found: 0x33 00001c20
Option found: 0x36 6452fdca
Option found: 0x35 05
Option found: 0x3a 00000e10
Option found: 0x3b 0000189c
Executing /etc_ro/udhcpc.sh bound
route: SIOCDELRT: No such process
opms_wan_ifname=usb0
LanIfName=br0
#######start the mtu_set.sh##########
#######end the mtu_set.sh##########
sh: !=: unknown operand
sh: !=: unknown operand
interface=usb0
ip=100.82.253.53
subnet=255.255.255.0
mask=24
router=100.82.253.202
dns=212.2.96.52 212.2.127.254
domain=lan
broadcast=100.82.253.255
lease=7200
serverid=100.82.253.202
siaddr=100.82.253.202
opt53=05
opt58=00000e10
opt59=0000189c
Entering listen mode: none
192.168.0.1255.255.255.0init_dns_ip:tmp_byte_netmask is 0
init_dns_ip:tmp_byte_netmask is 255
init_dns_ip:tmp_byte_netmask is 255
init_dns_ip:tmp_byte_netmask is 255
adb shell date
Sun Mar 20 00:48:09 UTC 2022
496 KB/s (20480 bytes in 0.040s)
3 KB/s (154 bytes in 0.042s)
Edit:
Wcześniej rejestracja interfejsów
cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.
[ 16.900000] cdc_acm 1-1:1.2: ttyACM0: USB ACM device
[ 16.900000] usbcore: registered new interface driver cdc_acm
[ 16.910000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 17.000000] usbcore: registered new interface driver usbserial
[ 17.000000] USB Serial support registered for generic
[ 17.010000] usbcore: registered new interface driver usbserial_generic
[ 17.020000] usbserial: USB Serial Driver core
[ 17.070000] Initializing USB Mass Storage driver...
[ 17.080000] usbcore: registered new interface driver usb-storage
[ 17.080000] USB Mass Storage support registered.
[ 17.100000] driver_info->flags 1020 idVendor 19d2 idProduct 1489
[ 17.110000] cdc_ether 1-1:1.6: ecm0: register 'cdc_ether' at usb-ehci-platform.0-1, CDC Ethernet Device, ce:38:27:cb:8f:e4
[ 17.120000] usbcore: registered new interface driver cdc_ether
[ 17.200000] generic_rndis_bind: rx_urb_size: 0x3e80
[ 17.210000] generic_rndis_bind: data zero copy=1
[ 17.210000] driver_info->flags 3238 idVendor 19d2 idProduct 1489
[ 17.220000] rndis_host 1-1:1.0: usb0: register 'rndis_host' at usb-ehci-platform.0-1, RNDIS device, da:76:63:dd:ab:3d
[ 17.230000] usbcore: registered new interface driver rndis_host
[ 17.290000] USB Serial support registered for GSM modem (1-port)
[ 17.300000] usbcore: registered new interface driver option
[ 17.310000] option: v0.7.2:USB Driver for GSM modems
[ 17.370000] fuse init (API version 7.18)
[ 18.160000] yaffs: dev is 32505864 name is "mtdblock8" rw
[ 18.170000] yaffs: passed flags ""
[ 18.510000] yaffs: dev is 32505871 name is "mtdblock15" rw
[ 18.510000] yaffs: passed flags ""
rm: can't remove '/etc_rw/fota/cp_failure_flag': No such file or directory
SOS: FLAG is mtdblock7
SOS: /etc_rw/fota/cfg_partiton_flag has [ 19.890000] yaffs: dev is 32505863 name is "mtdblock7" rw
content
[ 19.900000] yaffs: passed flags ""
space usage of /etc_rw/config is 28%
[ 20.080000] yaffs: dev is 32505866 name is "mtdblock10" rw
[ 20.090000] yaffs: passed flags ""
[ 20.100000] ath79_spinand_read_page ecc err status=0x2
SOS: /etc_rw/config use mtdblock7, /zte_backup use mtdblock10, now doing backup!
rm: can't remove '/zte_backup/lost+found': Directory not empty
[ 22.150000] Load cfg new driver...
[ 22.150000] cfg init, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 578
[ 22.160000]
[ 22.170000] wifi_chip1_ssid2_acc
[ 22.170000] 776966695f63686970315f73736964325f616363
[ 22.270000]
[ 22.270000] cfg init end, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 637
[ 22.290000] cfg init, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 578
[ 22.300000]
[ 22.300000] TESTBITSIGNINFO=0000
[ 22.300000] 544553544249545349474e494e464f3d30303030
[ 22.310000]
[ 22.310000] cfg init end, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 637
[ 22.320000] cfg init, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 578
[ 22.340000] cfg driver error: /etc_rw/inic/cert open failure, file: /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c, line: 857!
[ 22.350000]
[ 22.350000]
[ 22.360000] 0000000000000000000000000000000000000000
[ 22.360000]
[ 22.360000] cfg init end, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 637
[ 22.380000] cfg init, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 578
[ 22.390000] cfg driver error: /etc_rw/inic/wapi open failure, file: /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c, line: 857!
[ 22.400000]
[ 22.410000]
[ 22.410000] 0000000000000000000000000000000000000000
[ 22.410000]
[ 22.410000] cfg init end, /home/scl/ci/workspace/Soft4_MF286R_TMOPL_CPE/qsdk/build_dir/linux-ar71xx_generic/cfg-1.0/cfg_param.c 637
[ 22.450000] usbcore: registered new interface driver cdc_wdm
[ 22.880000] usbcore: registered new interface driver qmi_wwan
Strony Poprzednia 1 … 16 17 18 19 20 … 50 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Sprzęt / Hardware → ZTE MF286R - OpenWrt
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc