51 Odpowiedź przez Leo-PL

  • Leo-PL
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2019-11-05
  • Posty: 502

Odp: ZTE MF286 - Openwrt

er2de2 napisał/a:

Pacjent : MF 286-1.0
Wersja oprogramowania: CR_ENEEUMF286V1.0.0B11
Sieć Orange.
Da się określić czy to 286 ?, czy 286A ?, czy 286R ?

"Zwykły" 286. Mam z tej samej serii, tylko zatrzymał się na starszej wersji softu, bo rozsynchronizował się FW z modemem.
Ma ktoś release B07 lub nowszy?

52 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Dobra wiadomość! W między czasie okazało się,że gość ma do niego baterię w pudełku smile Zakupiony, zapłacony, czekam na kuriera.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

53 Odpowiedź przez piratee

  • Zarejestrowany: 2016-12-08
  • Posty: 628

Odp: ZTE MF286 - Openwrt

Ja już pisze do kilku osób o podanie wersji oprogramowania i modelu z informacji zawartych w systemie i brak odpowiedzi

ZTE MF 286D OpenWrt 23.05-SNAPSHOT r23484-b742216dc8
Zyxel EX5601-T0 ubootmod OpenWrt 24.10-SNAPSHOT, r28432-7609571dcd
TP-LINK Archer C7 v5 - 1.14.0.2 (Built 20231226-1035 git@8e210b77)

54 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: ZTE MF286 - Openwrt

Starą macie tu: https://dl.eko.one.pl/orig/zte_mf286/EEU/

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

55 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

piratee napisał/a:

Ja już pisze do kilku osób o podanie wersji oprogramowania i modelu z informacji zawartych w systemie i brak odpowiedzi

Zajrzyj na OL... sprzedający Barbara z Katowic, ta sama wersja co ja kupiłem, bateria na zdjęciu, cena 159 zł.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

56 Odpowiedź przez er2de2 (edytowany przez er2de2 2022-03-31 16:23:18)

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Panowie pomóżcie....jak zatrzymać bootloader ?
Po " Hit any key to stop autoboot " wciskam enter i zupa startuje tak jakbym nic nie wcisnął.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

57 Odpowiedź przez piratee

  • Zarejestrowany: 2016-12-08
  • Posty: 628

Odp: ZTE MF286 - Openwrt

Startuje U-boot i kilka informacji.(linijek)
Następnie jest linijka z ofliczaniem sekund.
Ja zatrzymuje spacją

ZTE MF 286D OpenWrt 23.05-SNAPSHOT r23484-b742216dc8
Zyxel EX5601-T0 ubootmod OpenWrt 24.10-SNAPSHOT, r28432-7609571dcd
TP-LINK Archer C7 v5 - 1.14.0.2 (Built 20231226-1035 git@8e210b77)

58 Odpowiedź przez pawol

  • pawol
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-09-19
  • Posty: 669

Odp: ZTE MF286 - Openwrt

albo nie dziala ci sygnał Tx

59 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Już ok poszło i śmigam już na mifi od Cezarego.
Nie działał mi sygnał Tx......ręczna robota bez lutowania smile

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

60 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Zauważyłem dziwny problem, gdy w terminalu wydam komendę reboot router wstaje i nie mam internetu dioda 3g/4g świeci na niebiesko,
gdy wyłącze i włącze router wajchą z tyłu wszystko jest ok, mam internet dida mryga.
Log po reboot z konsoli.

root@OpenWrt:~# logread
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.000000] Linux version 5.4.182 (roman@lenovo) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16541-5cf00adf21)) #0 Thu Mar 31 16:07:57 2022
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] printk: bootconsole [early0] enabled
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] MIPS: machine is ZTE MF286
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Fri Apr  1 16:55:59 2022 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Fri Apr  1 16:55:59 2022 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Zone ranges:
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Movable zone start for each node
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Early memory node ranges
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    0.000000]   Normal zone: 288 pages used for memmap
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] Memory: 121920K/131072K available (5521K kernel code, 177K rwdata, 708K rodata, 1200K init, 210K bss, 9152K reserved, 0K cma-reserved)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] NR_IRQS: 51
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x806a4a28 with crng_init=0
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] CPU clock: 775.000 MHz
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.008228] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.046721] pid_max: default: 32768 minimum: 301
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.051725] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.059439] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.071736] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.082023] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.089305] pinctrl core: initialized pinctrl subsystem
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.096042] NET: Registered protocol family 16
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.102406] GPIO line 19 (led:wlan) hogged as output/high
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.133351] clocksource: Switched to clocksource MIPS
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.139584] thermal_sys: Registered thermal governor 'step_wise'
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.139931] NET: Registered protocol family 2
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.151036] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.159383] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.168268] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.176360] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.183805] TCP: Hash tables configured (established 1024 bind 1024)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.190633] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.197575] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.205209] NET: Registered protocol family 1
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.209864] PCI: CLS 0 bytes, default 32
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.217601] workingset: timestamp_bits=14 max_order=15 bucket_order=1
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.230694] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.236884] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.260295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.271462] pinctrl-single 1804002c.pinmux: 544 pins, size 68
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.278539] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.287339] printk: console [ttyS0] disabled
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.291931] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.301040] printk: console [ttyS0] enabled
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.310096] printk: bootconsole [early0] disabled
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.329965] spi-nand spi0.1: GigaDevice SPI NAND was found.
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.335772] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.345256] 6 fixed-partitions partitions found on MTD device spi0.1
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.351868] Creating 6 MTD partitions on "spi0.1":
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.356835] 0x000000000000-0x000000140000 : "fota-flag"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.364537] 0x000000140000-0x000000280000 : "caldata"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.372919] 0x000000280000-0x0000003c0000 : "mac"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.380992] 0x0000003c0000-0x000001300000 : "ubiconcat0"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.405589] 0x000001300000-0x000001700000 : "kernel"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.416987] 0x000001700000-0x000008000000 : "ubiconcat1"
Fri Apr  1 16:55:59 2022 kern.info kernel: [    0.543086] spi-nor spi0.0: mx25l1606e (2048 Kbytes)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.548294] 2 fixed-partitions partitions found on MTD device spi0.0
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.554874] Creating 2 MTD partitions on "spi0.0":
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.559838] 0x000000000000-0x000000080000 : "u-boot"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.565914] 0x000000080000-0x0000000a0000 : "u-boot-env"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.572511] Concatenating MTD devices:
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.576436] (0): "ubiconcat0"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.579501] (1): "ubiconcat1"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.582564] into device "ubi-concat"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.586287] 1 fixed-partitions partitions found on MTD device ubi-concat
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.593213] Creating 1 MTD partitions on "ubi-concat":
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    0.598534] 0x000000000000-0x000007840000 : "ubi"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    1.153343] random: fast init done
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.244774] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.832848] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.844130] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.852661] NET: Registered protocol family 10
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.861760] Segment Routing with IPv6
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.865699] NET: Registered protocol family 17
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.870377] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.883768] 8021q: 802.1Q VLAN Support v1.8
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.890380] PCI host bridge /ahb/pcie-controller@18250000 ranges:
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.896744]  MEM 0x0000000012000000..0x0000000013ffffff
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.902150]   IO 0x0000000000000000..0x0000000000000000
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.907726] PCI host bridge to bus 0000:00
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.911996] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.919100] pci_bus 0000:00: root bus resource [io  0x0000]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.924860] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.931875] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.940092] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.946350] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.953419] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.960423] pci 0000:00:00.0: supports D1
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.964570] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.971535] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.978423] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
Fri Apr  1 16:55:59 2022 kern.info kernel: [    1.986001] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    1.995914] UBI: auto-attach mtd8
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    1.999408] ubi0: attaching mtd8
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.887148] ubi0: scanning is finished
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.916271] ubi0: attached mtd8 (name "ubi", size 120 MiB)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.921998] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.929104] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.936117] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.943310] ubi0: good PEBs: 958, bad PEBs: 4, corrupted PEBs: 0
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.949519] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.956976] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1495995972
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.966411] ubi0: available PEBs: 0, total reserved PEBs: 958, PEBs reserved for bad PEB handling: 15
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.976029] ubi0: background thread "ubi_bgt0d" started, PID 383
Fri Apr  1 16:55:59 2022 kern.info kernel: [    3.984378] block ubiblock0_0: created from ubi0:0(rootfs)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    3.990109] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Fri Apr  1 16:55:59 2022 kern.info kernel: [    4.008668] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Fri Apr  1 16:55:59 2022 kern.info kernel: [    4.022687] Freeing unused kernel memory: 1200K
Fri Apr  1 16:55:59 2022 kern.warn kernel: [    4.027388] This architecture does not have kernel memory protection.
Fri Apr  1 16:55:59 2022 kern.info kernel: [    4.034040] Run /sbin/init as init process
Fri Apr  1 16:55:59 2022 user.info kernel: [    4.653931] init: Console is alive
Fri Apr  1 16:55:59 2022 user.info kernel: [    4.657757] init: - watchdog -
Fri Apr  1 16:55:59 2022 user.info kernel: [    6.527878] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.702738] usbcore: registered new interface driver usbfs
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.708537] usbcore: registered new interface driver hub
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.714123] usbcore: registered new device driver usb
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.773304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    6.788200] SCSI subsystem initialized
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.796483] ehci-fsl: Freescale EHCI Host controller driver
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.804099] ehci-platform: EHCI generic platform driver
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.809786] ehci-platform 1b000000.usb: EHCI Host Controller
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.815696] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.823894] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.845355] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.852514] hub 1-0:1.0: USB hub found
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.856783] hub 1-0:1.0: 1 port detected
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.861507] ehci-platform 1b400000.usb: EHCI Host Controller
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.867412] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.875622] ehci-platform 1b400000.usb: irq 14, io mem 0x1b400000
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.897365] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.904553] hub 2-0:1.0: USB hub found
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.908827] hub 2-0:1.0: 1 port detected
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.919010] usbcore: registered new interface driver usb-storage
Fri Apr  1 16:55:59 2022 kern.info kernel: [    6.927300] usbcore: registered new interface driver uas
Fri Apr  1 16:55:59 2022 user.info kernel: [    6.933599] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Apr  1 16:55:59 2022 user.info kernel: [    6.951486] init: - preinit -
Fri Apr  1 16:55:59 2022 kern.info kernel: [    7.393548] usb 2-1: new high-speed USB device number 2 using ehci-platform
Fri Apr  1 16:55:59 2022 kern.info kernel: [    7.400827] usb 1-1: new high-speed USB device number 2 using ehci-platform
Fri Apr  1 16:55:59 2022 kern.info kernel: [    7.655005] usb-storage 2-1:1.0: USB Mass Storage device detected
Fri Apr  1 16:55:59 2022 kern.info kernel: [    7.764456] scsi host0: usb-storage 2-1:1.0
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    7.771608] random: procd: uninitialized urandom read (4 bytes read)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    8.329031] random: jshn: uninitialized urandom read (4 bytes read)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    8.395825] random: jshn: uninitialized urandom read (4 bytes read)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    8.782515] scsi 0:0:0:0: Direct-Access              silicon-power    PMAP PQ: 0 ANSI: 0 CCS
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    8.810101] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    8.823124] sd 0:0:0:0: [sda] Write Protect is off
Fri Apr  1 16:55:59 2022 kern.debug kernel: [    8.828114] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Fri Apr  1 16:55:59 2022 kern.err kernel: [    8.833394] sd 0:0:0:0: [sda] No Caching mode page found
Fri Apr  1 16:55:59 2022 kern.err kernel: [    8.838910] sd 0:0:0:0: [sda] Assuming drive cache: write through
Fri Apr  1 16:55:59 2022 kern.info kernel: [    8.874073]  sda: sda1
Fri Apr  1 16:55:59 2022 kern.notice kernel: [    8.957748] sd 0:0:0:0: [sda] Attached SCSI removable disk
Fri Apr  1 16:55:59 2022 kern.info kernel: [    9.749447] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
Fri Apr  1 16:55:59 2022 kern.info kernel: [    9.763455] eth0: link up (1000Mbps/Full duplex)
Fri Apr  1 16:55:59 2022 kern.info kernel: [    9.776448] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Apr  1 16:55:59 2022 kern.info kernel: [    9.796886] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Fri Apr  1 16:55:59 2022 user.info kernel: [   13.976809] mount_root: loading kmods from internal overlay
Fri Apr  1 16:55:59 2022 user.info kernel: [   14.012283] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Fri Apr  1 16:55:59 2022 user.info kernel: [   14.020647] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   15.836289] UBIFS (ubi0:1): Mounting in unauthenticated mode
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   15.844418] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 575
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   15.976629] UBIFS (ubi0:1): recovery needed
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.248367] UBIFS (ubi0:1): recovery completed
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.253077] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.261183] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.271425] UBIFS (ubi0:1): FS size: 109834240 bytes (104 MiB, 865 LEBs), journal size 5459968 bytes (5 MiB, 43 LEBs)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.282379] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.289219] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 96CE67AC-3C9C-41D9-B5B1-94A0516EBD90, small LPT model
Fri Apr  1 16:55:59 2022 user.info kernel: [   16.309551] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Fri Apr  1 16:55:59 2022 user.info kernel: [   16.335502] block: extroot: not configured
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.339961] UBIFS (ubi0:1): un-mount UBI device 0
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.344878] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.358898] UBIFS (ubi0:1): Mounting in unauthenticated mode
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.365164] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 578
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.657427] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.665541] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.675781] UBIFS (ubi0:1): FS size: 109834240 bytes (104 MiB, 865 LEBs), journal size 5459968 bytes (5 MiB, 43 LEBs)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.686734] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   16.693574] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 96CE67AC-3C9C-41D9-B5B1-94A0516EBD90, small LPT model
Fri Apr  1 16:55:59 2022 user.info kernel: [   16.716581] mount_root: loading kmods from internal overlay
Fri Apr  1 16:55:59 2022 user.info kernel: [   16.753969] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Fri Apr  1 16:55:59 2022 user.info kernel: [   16.768019] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Fri Apr  1 16:55:59 2022 user.info kernel: [   18.359285] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Fri Apr  1 16:55:59 2022 user.info kernel: [   18.377324] block: extroot: not configured
Fri Apr  1 16:55:59 2022 user.info kernel: [   18.387650] mount_root: switching to ubifs overlay
Fri Apr  1 16:55:59 2022 user.warn kernel: [   18.415676] urandom-seed: Seeding with /etc/urandom.seed
Fri Apr  1 16:55:59 2022 kern.info kernel: [   18.513828] eth0: link down
Fri Apr  1 16:55:59 2022 user.info kernel: [   18.534546] procd: - early -
Fri Apr  1 16:55:59 2022 user.info kernel: [   18.537740] procd: - watchdog -
Fri Apr  1 16:55:59 2022 user.info kernel: [   19.234806] procd: - watchdog -
Fri Apr  1 16:55:59 2022 user.info kernel: [   19.242708] procd: - ubus -
Fri Apr  1 16:55:59 2022 kern.warn kernel: [   19.349559] urandom_read: 3 callbacks suppressed
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   19.349565] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   19.402106] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   19.409577] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Apr  1 16:55:59 2022 user.info kernel: [   19.425288] procd: - init -
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   20.303293] crng init done
Fri Apr  1 16:55:59 2022 kern.notice kernel: [   20.306101] random: 1 urandom warning(s) missed due to ratelimiting
Fri Apr  1 16:55:59 2022 user.info kernel: [   20.909893] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Apr  1 16:55:59 2022 kern.info kernel: [   20.964044] tun: Universal TUN/TAP device driver, 1.6
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.029076] fuse: init (API version 7.31)
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.057928] usbcore: registered new interface driver cdc_wdm
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.077955] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.085860] Backport generated by backports.git v5.10.85-1-0-gf988973f
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.164666] usbcore: registered new interface driver usbserial_generic
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.171553] usbserial: USB Serial support registered for generic
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.230182] xt_time: kernel timezone is -0000
Fri Apr  1 16:55:59 2022 user.info kernel: [   21.335413] urngd: v1.0.2 started.
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.443834] PPP generic driver version 2.4.2
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.462187] NET: Registered protocol family 24
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.487642] qmi_wwan 1-1:1.3: cdc-wdm0: USB WDM device
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.493788] qmi_wwan 1-1:1.3 wwan0: register 'qmi_wwan' at usb-1b000000.usb-1, WWAN/QMI device, da:08:ad:90:60:34
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.504681] usbcore: registered new interface driver qmi_wwan
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.640711] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x3c.
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.678233] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
Fri Apr  1 16:55:59 2022 kern.info kernel: [   21.684888] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Fri Apr  1 16:55:59 2022 kern.info kernel: [   24.440397] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
Fri Apr  1 16:55:59 2022 kern.info kernel: [   24.449984] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Fri Apr  1 16:55:59 2022 kern.info kernel: [   24.462211] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f
Fri Apr  1 16:55:59 2022 kern.info kernel: [   24.716767] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
Fri Apr  1 16:55:59 2022 kern.warn kernel: [   25.614761] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.632708] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.639165] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.647468] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.704418] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.719671] ath10k_pci 0000:00:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   25.832884] ath: EEPROM regdomain sanitized
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   25.832892] ath: EEPROM regdomain: 0x64
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   25.832895] ath: EEPROM indicates we should expect a direct regpair map
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   25.832914] ath: Country alpha2 being used: 00
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   25.832917] ath: Regpair used: 0x64
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.882498] usbcore: registered new interface driver option
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.888388] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.896259] option 1-1:1.0: GSM modem (1-port) converter detected
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.902832] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.910441] option 1-1:1.1: GSM modem (1-port) converter detected
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.917027] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.924623] option 1-1:1.2: GSM modem (1-port) converter detected
Fri Apr  1 16:55:59 2022 kern.info kernel: [   25.931203] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   26.037993] ath: EEPROM regdomain sanitized
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   26.038003] ath: EEPROM regdomain: 0x64
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   26.038007] ath: EEPROM indicates we should expect a direct regpair map
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   26.038025] ath: Country alpha2 being used: 00
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   26.038028] ath: Regpair used: 0x64
Fri Apr  1 16:55:59 2022 kern.debug kernel: [   26.049696] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Fri Apr  1 16:55:59 2022 kern.info kernel: [   26.051572] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
Fri Apr  1 16:55:59 2022 user.info kernel: [   26.113396] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Apr  1 16:55:59 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Apr  1 16:55:59 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: Connected to system UBus
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: started, version 2.85 cachesize 150
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: DNS service limited to local subnets
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: UBus support enabled: connected to system bus
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain test
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain onion
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain localhost
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain local
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain invalid
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain bind
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: using only locally-known addresses for domain lan
Fri Apr  1 16:56:00 2022 daemon.warn dnsmasq[1490]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: read /etc/hosts - 4 addresses
Fri Apr  1 16:56:00 2022 daemon.info dnsmasq[1490]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Apr  1 16:56:00 2022 authpriv.info dropbear[1552]: Not backgrounding
Fri Apr  1 16:56:02 2022 daemon.notice wpa_supplicant[1651]: Successfully initialized wpa_supplicant
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: bonding
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: 8021ad
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: 8021q
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: macvlan
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: veth
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: bridge
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: Network device
Fri Apr  1 16:56:03 2022 user.notice : Added device handler type: tunnel
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.389979] eth0: link up (1000Mbps/Full duplex)
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.404178] br-lan: port 1(eth0.1) entered blocking state
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.409815] br-lan: port 1(eth0.1) entered disabled state
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.415713] device eth0.1 entered promiscuous mode
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.420707] device eth0 entered promiscuous mode
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.426650] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.481519] br-lan: port 1(eth0.1) entered blocking state
Fri Apr  1 16:56:09 2022 kern.info kernel: [   38.487130] br-lan: port 1(eth0.1) entered forwarding state
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'lan' is enabled
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'lan' is setting up now
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'lan' is now up
Fri Apr  1 16:56:09 2022 daemon.notice netifd: bridge 'br-lan' link is up
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Apr  1 16:56:09 2022 daemon.notice netifd: VLAN 'eth0.1' link is up
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'loopback' is enabled
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'loopback' is now up
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'wan' is setting up now
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Network device 'eth0' link is up
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Network device 'lo' link is up
Fri Apr  1 16:56:09 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Apr  1 16:56:10 2022 daemon.notice netifd: wan (1904): Waiting for SIM initialization
Fri Apr  1 16:56:10 2022 kern.info kernel: [   39.418960] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Apr  1 16:56:10 2022 daemon.err odhcpd[1767]: Failed to send to ff02::1%lan@br-lan (Address not available)
Fri Apr  1 16:56:10 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556778] ath: EEPROM regdomain: 0x8268
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556785] ath: EEPROM indicates we should expect a country code
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556791] ath: doing EEPROM country->regdmn map search
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556796] ath: country maps to regdmn code: 0x37
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556801] ath: Country alpha2 being used: PL
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556804] ath: Regpair used: 0x37
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556809] ath: regdomain 0x8268 dynamically updated by user
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556886] ath: EEPROM regdomain: 0x8268
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556889] ath: EEPROM indicates we should expect a country code
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556894] ath: doing EEPROM country->regdmn map search
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556899] ath: country maps to regdmn code: 0x37
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556902] ath: Country alpha2 being used: PL
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556905] ath: Regpair used: 0x37
Fri Apr  1 16:56:12 2022 kern.debug kernel: [   41.556908] ath: regdomain 0x8268 dynamically updated by user
Fri Apr  1 16:56:12 2022 daemon.notice procd: /etc/rc.d/S50minidlna: [2022/04/01 16:56:12] minidlna.c:620: error: Media directory "/mnt/ftp/DLNA" not accessible [No such file or directory]
Fri Apr  1 16:56:13 2022 daemon.notice procd: /etc/rc.d/S50netserver: Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
Fri Apr  1 16:56:14 2022 daemon.notice procd: /etc/rc.d/S90zerotier: disabled in config
Fri Apr  1 16:56:14 2022 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Fri Apr  1 16:56:14 2022 kern.info kernel: [   43.897985] br-lan: port 2(wlan1) entered blocking state
Fri Apr  1 16:56:14 2022 kern.info kernel: [   43.903530] br-lan: port 2(wlan1) entered disabled state
Fri Apr  1 16:56:14 2022 kern.info kernel: [   43.909375] device wlan1 entered promiscuous mode
Fri Apr  1 16:56:14 2022 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Apr  1 16:56:14 2022 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->HT_SCAN
Fri Apr  1 16:56:14 2022 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Fri Apr  1 16:56:16 2022 kern.warn kernel: [   45.542342] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.560336] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.566599] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.575330] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
Fri Apr  1 16:56:16 2022 kern.warn kernel: [   45.662214] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.691150] ath10k_pci 0000:00:00.0: rts threshold -1
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.757131] br-lan: port 3(wlan0) entered blocking state
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.762680] br-lan: port 3(wlan0) entered disabled state
Fri Apr  1 16:56:16 2022 kern.info kernel: [   45.768473] device wlan0 entered promiscuous mode
Fri Apr  1 16:56:16 2022 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Apr  1 16:56:16 2022 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Fri Apr  1 16:56:16 2022 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=13 sec=9 based on overlapping BSSes
Fri Apr  1 16:56:16 2022 daemon.info aria2: Instance "main" disabled.
Fri Apr  1 16:56:16 2022 daemon.notice netifd: Wireless device 'radio1' is now up
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[1490]: exiting on receipt of SIGTERM
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: Connected to system UBus
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: started, version 2.85 cachesize 150
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: DNS service limited to local subnets
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: UBus support enabled: connected to system bus
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq-dhcp[2586]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Apr  1 16:56:17 2022 kern.info kernel: [   46.209992] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Fri Apr  1 16:56:17 2022 kern.info kernel: [   46.216811] br-lan: port 2(wlan1) entered blocking state
Fri Apr  1 16:56:17 2022 kern.info kernel: [   46.222344] br-lan: port 2(wlan1) entered forwarding state
Fri Apr  1 16:56:17 2022 daemon.notice netifd: Network device 'wlan1' link is up
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain test
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain onion
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain localhost
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain local
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain invalid
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain bind
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: using only locally-known addresses for domain lan
Fri Apr  1 16:56:17 2022 daemon.warn dnsmasq[2586]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: read /etc/hosts - 4 addresses
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq-dhcp[2586]: read /etc/ethers - 0 addresses
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: read /etc/hosts - 4 addresses
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq[2586]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Fri Apr  1 16:56:17 2022 daemon.info dnsmasq-dhcp[2586]: read /etc/ethers - 0 addresses
Fri Apr  1 16:56:17 2022 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Fri Apr  1 16:56:17 2022 daemon.notice hostapd: wlan1: AP-ENABLED
Fri Apr  1 16:56:17 2022 daemon.info procd: - init complete -
Fri Apr  1 16:56:18 2022 daemon.notice netifd: Wireless device 'radio0' is now up
Fri Apr  1 16:56:19 2022 kern.info kernel: [   48.880457] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Apr  1 16:56:19 2022 kern.info kernel: [   48.887246] br-lan: port 3(wlan0) entered blocking state
Fri Apr  1 16:56:19 2022 kern.info kernel: [   48.892790] br-lan: port 3(wlan0) entered forwarding state
Fri Apr  1 16:56:19 2022 daemon.notice netifd: Network device 'wlan0' link is up
Fri Apr  1 16:56:19 2022 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Fri Apr  1 16:56:19 2022 daemon.notice hostapd: wlan0: AP-ENABLED
Fri Apr  1 16:56:20 2022 daemon.info hostapd: wlan1: STA 00:0a:f5:7a:0b:08 IEEE 802.11: authenticated
Fri Apr  1 16:56:20 2022 daemon.info hostapd: wlan1: STA 00:0a:f5:7a:0b:08 IEEE 802.11: associated (aid 1)
Fri Apr  1 16:56:20 2022 daemon.notice hostapd: wlan1: AP-STA-CONNECTED 00:0a:f5:7a:0b:08
Fri Apr  1 16:56:20 2022 daemon.info hostapd: wlan1: STA 00:0a:f5:7a:0b:08 WPA: pairwise key handshake completed (RSN)
Fri Apr  1 16:56:20 2022 daemon.info dnsmasq-dhcp[2586]: DHCPREQUEST(br-lan) 192.168.1.240 00:0a:f5:7a:0b:08
Fri Apr  1 16:56:20 2022 daemon.info dnsmasq-dhcp[2586]: DHCPACK(br-lan) 192.168.1.240 00:0a:f5:7a:0b:08 Mi-A2-Lite
Fri Apr  1 16:56:21 2022 daemon.info dnsmasq-dhcp[2586]: DHCPREQUEST(br-lan) 192.168.1.249 f0:76:1c:d4:5b:ee
Fri Apr  1 16:56:21 2022 daemon.info dnsmasq-dhcp[2586]: DHCPACK(br-lan) 192.168.1.249 f0:76:1c:d4:5b:ee lenovo
Fri Apr  1 16:56:22 2022 daemon.info dnsmasq[2586]: read /etc/hosts - 4 addresses
Fri Apr  1 16:56:22 2022 daemon.info dnsmasq[2586]: read /tmp/hosts/odhcpd - 1 addresses
Fri Apr  1 16:56:22 2022 daemon.info dnsmasq[2586]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Fri Apr  1 16:56:22 2022 daemon.info dnsmasq-dhcp[2586]: read /etc/ethers - 0 addresses
Fri Apr  1 16:56:57 2022 daemon.info hostapd: wlan0: STA 54:3a:d6:e5:73:8c IEEE 802.11: authenticated
Fri Apr  1 16:56:57 2022 daemon.info hostapd: wlan0: STA 54:3a:d6:e5:73:8c IEEE 802.11: associated (aid 1)
Fri Apr  1 16:56:57 2022 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 54:3a:d6:e5:73:8c
Fri Apr  1 16:56:57 2022 daemon.info hostapd: wlan0: STA 54:3a:d6:e5:73:8c WPA: pairwise key handshake completed (RSN)
Fri Apr  1 16:56:57 2022 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 54:3a:d6:e5:73:8c 1
Fri Apr  1 16:56:59 2022 authpriv.info dropbear[2712]: Child connection from 192.168.1.249:60778
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPREQUEST(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 16:57:01 2022 daemon.info dnsmasq-dhcp[2586]: DHCPACK(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c Samsung
Fri Apr  1 16:57:03 2022 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 54:3a:d6:e5:73:8c 2
Fri Apr  1 16:57:03 2022 authpriv.notice dropbear[2712]: Password auth succeeded for 'root' from 192.168.1.249:60778
Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

61 Odpowiedź przez Leo-PL (edytowany przez Leo-PL 2022-04-01 18:51:30)

  • Leo-PL
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2019-11-05
  • Posty: 502

Odp: ZTE MF286 - Openwrt

Czy ktoś posiada release (względem wersji routera) EN_EEU_1.0.0B07 lub nowszy - zawierający wersję modemu 1.0.0B03? Potrzebuję takiego, by popchnąć do przodu OTA update modemu do wersji B04, mój modem utknął na B03 przez to, że update routera do B06 nie powiódł się przez wytarty flash, podczas gdy update modemu dał radę.

@Cezary, a propos powyższego, nie brakuje u Ciebie czasem patcha który naprawiał gpio-restart na ath79? Konkretnie, tego: https://github.com/openwrt/openwrt/comm … e2901406ff
Aczkolwiek w tym przypadku mamy do czynienia jeszcze z bugiem w uqmi który warto byłoby załatać.

@er2de2: zrestartuj interfejs WAN ("ifup wan") i zbierz logi z momentu jego wstawania.

62 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: ZTE MF286 - Openwrt

Mam go:

$ ls target/linux/ath79/patches-5.4/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch 
target/linux/ath79/patches-5.4/860-v5.17-MIPS-ath79-drop-_machine_restart-again.patch
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

63 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Leo-PL napisał/a:

@er2de2: zrestartuj interfejs WAN ("ifup wan") i zbierz logi z momentu jego wstawania.

Końcówka loga:

Fri Apr  1 19:26:33 2022 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 54:3a:d6:e5:73:8c 1
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPDISCOVER(br-lan) 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPOFFER(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPREQUEST(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c
Fri Apr  1 19:26:36 2022 daemon.info dnsmasq-dhcp[2579]: DHCPACK(br-lan) 192.168.1.170 54:3a:d6:e5:73:8c Samsung
Fri Apr  1 19:26:37 2022 daemon.notice netifd: wan (2872): Stopping network wan
Fri Apr  1 19:26:37 2022 daemon.notice netifd: wan (2872): Command failed: Permission denied
Fri Apr  1 19:26:37 2022 daemon.notice netifd: Interface 'wan' is now down
Fri Apr  1 19:26:37 2022 daemon.notice netifd: Interface 'wan' is setting up now
Fri Apr  1 19:26:37 2022 daemon.notice netifd: wan (2886): Waiting for SIM initialization
Fri Apr  1 19:26:39 2022 daemon.notice hostapd: wlan0: STA-OPMODE-N_SS-CHANGED 54:3a:d6:e5:73:8c 2
Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

64 Odpowiedź przez Leo-PL (edytowany przez Leo-PL 2022-04-01 22:49:33)

  • Leo-PL
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2019-11-05
  • Posty: 502

Odp: ZTE MF286 - Openwrt

Jak zrestartujesz interfejs jeszcze raz, to wciąż na tym wisi?
Also, jaką masz wersję softu na modemie? Może będziesz mi w stanie pomóc z powyższym ;-)

65 Odpowiedź przez er2de2 (edytowany przez er2de2 2022-04-02 07:16:36)

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Tak po restarcie bez zmian brak wanu > ifup wan > wisi na Waiting for SIM initialization > reboot > nie ma wanu itd.
Tylko pstryczek z tyłu robi robotę.
Czy po reboot z konsoli router powinien "zgasnąć" na chwilę?
U mnie diody się świecą, tylko po aplecie na pasku stanu widzę,że nawiązuje połączenie z routerem.

Mój modem:  Revision: BD_MF286MODULEV1.0.0B04

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

66 Odpowiedź przez Leo-PL

  • Leo-PL
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2019-11-05
  • Posty: 502

Odp: ZTE MF286 - Openwrt

Ok, to masz za nową rewizję modemu dla mnie, do tej chciałem pobić swój.
Tak, diody na przednim panelu mają zgasnąć na chwilę przy reboocie.
Natomiast moim zdaniem, handler protokołu QMI o czymś zapomina, wypadałoby to przeanalizować. Mogę bez większego problemu zasymulować to na swoich urządzeniach, więc easy.

67 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Zauważyłem że po świeżej instalacji konfiguruje połączenie komendami uci...bla,bla,bla >reboot diody gasną na chwilę router wstaje, nawiązuje połączenie, mam internet jest ok.Każdy kolejny reboot to już diody świecą cały czas i mam ten problem.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

68 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: ZTE MF286 - Openwrt

Jak sam się nie chce połączyć pokaż wynik ifstatus wan (lub zmień tą nazwę jeżeli używasz innej sekcji konfiguracyjnej).

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

69 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Swieżo po reboot:


root@OpenWrt:~# ifstatus wan
{
    "up": false,
    "pending": true,
    "available": true,
    "autostart": true,
    "dynamic": false,
    "proto": "qmi",
    "data": {
        
    }
}
Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

70 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: ZTE MF286 - Openwrt

Czyli wszystko czeka na połączenie po prostu. Zrób killall uqmi i zobacz co będzie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

71 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Po killall uqmi dioda zaczęła mrygac,....mam internet, stąd ten post smile

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

72 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: ZTE MF286 - Openwrt

Z magicznego powodu zatrzymuje się u ciebie. Zrób tak:
- jeszcze raz restart aż się nie będzie chciał połączyć
- robisz polecenie ps, patrzysz na czym uqmi wisi. Powiedzmy że będzie to uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"'  czy coś podobnego
- robisz vi /lib/netifd/proto/qmi.sh, znajdujesz linię gdzie to jest i po uqmi dodajesz -t 3000 (timeout 3000ms), czyli ma to wyglądać przykładowo

uqmi -t 3000 -s -d "$device" ... itd

- reboot i powinno działać. Chyba że wisi na czymś innym to też dodajesz ten timeout.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

73 Odpowiedź przez er2de2 (edytowany przez er2de2 2022-04-02 15:02:32)

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Kruca bomba Cezary jesteś Jasnowidz smile
To było to, ten problem "kropka w kropkę" jak w Twoim poście.
Po edycji i reboocie router nadal nie gasi diod, ale nawiązuję połączenie i mam internet.
Dziękuję!

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

74 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 - Openwrt

Cezary da się edytować ten skrypt qmi.sh wcześniej, tzn. na poziomie kompilacji ze źródeł.
Sam sobie kompiluje system z Twoich config.buildinfo dodając pakiety których potrzebuję.

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

75 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,052

Odp: ZTE MF286 - Openwrt

Jak już masz zmieniony plik to w katalogu że źródłami openwrt zrób

mkdir -p files/lib/netifd/proto

i w katalogu files/lib/netifd/proto umieść ten zmodyfikowany qmi.sh. Oczywiście nadaj mu prawa wykonywania. To co jest w files zostanie włączone do obrazu który będziesz kompilował.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona