76 Odpowiedź przez Scotch

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

@geos zgadzam się z Tobą, że nie należy zmieniać zbyt wielu rzeczy naraz.
Myślałem, że kudlaty499 ma domyślną konfiguracje i modyfikuje jedynie sekcje 'wan' i 'dsl'

77 Odpowiedź przez kudlaty499

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

zrobilem restart do fabrycznych i bez wrzucania pliku vds.bin tez jest synchronizacja dsl

78 Odpowiedź przez Scotch (edytowany przez Scotch 2015-08-14 21:10:02)

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

To ciekawe, bo masz plik z firmware adsl/vdsl dla aneksu A

Edit: upewnij się co do parametrów Twojej linii u dostawcy, bo inaczej blądzimy

79 Odpowiedź przez Scotch

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Wg. ostatniego postu w tym wątku: http://www.elektroda.pl/rtvforum/topic2332192.html
parametry dla dialogu są nastepujace:
VPI: 8
VCI: 35
VLAN ID: 35

Więc ustawienia, które podałem Ci tu: http://eko.one.pl/forum/viewtopic.php?p … 01#p145301 są poprawne

80 Odpowiedź przez kudlaty499

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

czy VLAN ID: wpisuje sie gdzies?

81 Odpowiedź przez Scotch (edytowany przez Scotch 2015-08-14 21:31:11)

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

W tym przypadku VLAN ID = VCI (option ifname 'ptm8.35')

82 Odpowiedź przez Scotch

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Taka ciekawostka, wrzyciłem do swojego Tp-linka TD-W8970 (ma ten sam modem) firmware vdsl.bin dla aneksu B
Okazuje, się że również działa na linii vdsl Orange (przy ustawieniach, jak dla aneksu A). Jest synchronizacja, otrzymałem DNSy i IP - mam neta wink

83 Odpowiedź przez kudlaty499

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Dzwoniac do operatora dowiedzialem sie jakie parametry ma moja linia i tak:

VPI 8
VCI 35

PPPOE LLC

I pan powiedzial ze annex nie gra roli dlatego ze to polaczenie VDSL  co na to powiedza znawcy.

84 Odpowiedź przez Scotch

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Właśnie sprawę aneksu przetestowałem.
Więc nie musisz zamieniać pliku vdsl.bin
Ustaw jedynie, tak jak Ci wcześniej poleciłem.
P.S. Gdybyś to zrobił od razu, a nie wpisywał wadliwe parametry oszczędzilibyśmy sobie wszyscy czasu.

85 Odpowiedź przez geos (edytowany przez geos 2015-08-14 22:19:23)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: zyxel p-2812hnu-f3 POMOC!!!!

to wszystko jest bardzo ciekawe smile mam nadzieję, że już teraz będzie z górki smile

86 Odpowiedź przez kudlaty499

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

moje próby niestety nie dały żadnego rezultatu konfiguracja 'atm' czy 'ptm nie zadziałała.nie wiem co robić

87 Odpowiedź przez Scotch (edytowany przez Scotch 2015-08-15 07:37:53)

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Ok. Na początek ustaw sekcje 'wan' i 'dsl' w pliku network tak:

config interface 'wan'
        option ifname 'ptm8.35'
        option proto 'pppoe'
        option username 'login'
        option password 'hasło'
        option ipv6 '0'

config vdsl 'dsl'
        option annex 'b'
        option firmware '/lib/firmware/vdsl.bin'
        option tone 'bv' 
        option xfer_mode 'ptm'

Sekcję 'atm' usuń, tak jak w poradniku wiki.

Po restarcie routera pokaż wynik polecenia ifconfig i zawartość pliku /etc/config/network

88 Odpowiedź przez kudlaty499 (edytowany przez kudlaty499 2015-08-15 09:52:49)

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fdad:a645:1a67::/48'

config interface 'lan'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ifname 'eth0.1'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '0 1 2 4 5 6t'

#config atm-bridge 'atm'
#       option vpi '1'
#       option vci '32'
#       option encaps 'llc'
#       option payload 'bridged'

config interface 'wan'
        option ifname 'pttm8.35'
        option proto 'pppoe'
        option username 'xxxxxxxxxxxxxxxxxxxxxxxxx'
        option password 'xxxxxxxxxxxxxxxxxxxxxxxxx'
        option ipv6 '0'

config interface 'wan6'
        option ifname '@wan'
        option proto 'dhcpv6'

config vdsl 'dsl'
        option annex 'b'
        option firmware '/lib/firmware/vdsl.bin'
        option tone 'bv'
        option xfer_mode 'ptm'

root@OpenWrt:~# ifconfig
br-lan    Link encap:Ethernet  HWaddr 9A:24:98:DD:BD:56
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fdad:a645:1a67::1/60 Scope:Global
          inet6 addr: fe80::9824:98ff:fedd:bd56/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5509 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4915 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:481359 (470.0 KiB)  TX bytes:706119 (689.5 KiB)

eth0      Link encap:Ethernet  HWaddr 9A:24:98:DD:BD:56
          inet6 addr: fe80::9824:98ff:fedd:bd56/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6269 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4931 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:797505 (778.8 KiB)  TX bytes:746834 (729.3 KiB)

eth0.1    Link encap:Ethernet  HWaddr 9A:24:98:DD:BD:56
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6243 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4924 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:631750 (616.9 KiB)  TX bytes:704276 (687.7 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:4769 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4769 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:331020 (323.2 KiB)  TX bytes:331020 (323.2 KiB)

89 Odpowiedź przez geos (edytowany przez geos 2015-08-15 09:42:03)

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: zyxel p-2812hnu-f3 POMOC!!!!

option ifname 'pttm8.35' -> option ifname 'ptm8.35'

może usuń stąd hasło i usera, no chyba, że nie są prawdziwe.

90 Odpowiedź przez kudlaty499 (edytowany przez kudlaty499 2015-08-15 09:51:31)

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fdad:a645:1a67::/48'

config interface 'lan'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ifname 'eth0.1'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '0 1 2 4 5 6t'

#config atm-bridge 'atm'
#       option vpi '1'
#       option vci '32'
#       option encaps 'llc'
#       option payload 'bridged'

config interface 'wan'
        option ifname 'ptm8.35'
        option proto 'pppoe'
        option username 'xxxxxxxxxxxxxxxxxxxxxxxx'
        option password 'xxxxxxxxxxxxxxxxxxxxxxxx'
        option ipv6 '0'

config interface 'wan6'
        option ifname '@wan'
        option proto 'dhcpv6'

config vdsl 'dsl'
        option annex 'b'
        option firmware '/lib/firmware/vdsl.bin'
        option tone 'bv'
        option xfer_mode 'ptm'

91 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: zyxel p-2812hnu-f3 POMOC!!!!

wyłącz i włącz ruter i po uruchomieniu dla pewności wklej wynik poleceń uci show network.dsl oraz uci show network.wan

92 Odpowiedź przez Scotch

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Edytuj poprzednie posty i wykasuj dane do logowania!!!
Pozatym brakuje mi w ifconfig, tego co najważniejsze tj. interface'ow: ptm8, ptm8.35
Zrób restart routera i pokaż cały wynik polecenia: ifconfig -a (najlepiej wstaw pomiędzy znaczniki 

...

93 Odpowiedź przez kudlaty499 (edytowany przez kudlaty499 2015-08-15 09:54:48)

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

network.dsl=vdsl
network.dsl.annex='b'
network.dsl.firmware='/lib/firmware/vdsl.bin'
network.dsl.tone='bv'
network.dsl.xfer_mode='ptm'
root@OpenWrt:~# uci show network.wan
network.wan=interface
network.wan.ifname='ptm8.35'
network.wan.proto='pppoe'
network.wan.username='xxxxxxxxxx'
network.wan.password='xxxxxxxxxx'
network.wan.ipv6='0'

94 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: zyxel p-2812hnu-f3 POMOC!!!!

i jeszcze ifconfig -a

95 Odpowiedź przez kudlaty499 (edytowany przez kudlaty499 2015-08-15 10:12:30)

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

root@OpenWrt:~# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr A6:01:F5:4F:26:F4
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fdad:a645:1a67::1/60 Scope:Global
          inet6 addr: fe80::a401:f5ff:fe4f:26f4/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:419 errors:0 dropped:0 overruns:0 frame:0
          TX packets:250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:36382 (35.5 KiB)  TX bytes:31934 (31.1 KiB)

eth0      Link encap:Ethernet  HWaddr A6:01:F5:4F:26:F4
          inet6 addr: fe80::a401:f5ff:fe4f:26f4/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:672 errors:0 dropped:0 overruns:0 frame:0
          TX packets:282 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:117847 (115.0 KiB)  TX bytes:37232 (36.3 KiB)

eth0.1    Link encap:Ethernet  HWaddr A6:01:F5:4F:26:F4
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:640 errors:0 dropped:0 overruns:0 frame:0
          TX packets:275 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:97654 (95.3 KiB)  TX bytes:33964 (33.1 KiB)

gre0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-44-00-00-00-00-00-00-00-00
          NOARP  MTU:1476  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gretap0   Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1462  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb0      Link encap:Ethernet  HWaddr BE:57:15:C4:45:6D
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb1      Link encap:Ethernet  HWaddr E2:56:DE:C2:B5:1B
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:192 errors:0 dropped:0 overruns:0 frame:0
          TX packets:192 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:13728 (13.4 KiB)  TX bytes:13728 (13.4 KiB)

ptm0      Link encap:Ethernet  HWaddr 00:20:DA:86:23:75
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

teql0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:0C:43:30:92:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

bez podpietej linji dsl

96 Odpowiedź przez kudlaty499 (edytowany przez kudlaty499 2015-08-15 10:13:21)

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

root@OpenWrt:~#  ifconfig -a
br-lan    Link encap:Ethernet  HWaddr A6:01:F5:4F:26:F4
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fdad:a645:1a67::1/60 Scope:Global
          inet6 addr: fe80::a401:f5ff:fe4f:26f4/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:999 errors:0 dropped:0 overruns:0 frame:0
          TX packets:727 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:75758 (73.9 KiB)  TX bytes:78061 (76.2 KiB)

eth0      Link encap:Ethernet  HWaddr A6:01:F5:4F:26:F4
          inet6 addr: fe80::a401:f5ff:fe4f:26f4/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1433 errors:0 dropped:0 overruns:0 frame:0
          TX packets:767 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:215807 (210.7 KiB)  TX bytes:87987 (85.9 KiB)

eth0.1    Link encap:Ethernet  HWaddr A6:01:F5:4F:26:F4
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1401 errors:0 dropped:0 overruns:0 frame:0
          TX packets:760 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:175828 (171.7 KiB)  TX bytes:80659 (78.7 KiB)

gre0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-44-00-00-00-00-00-00-00-00
          NOARP  MTU:1476  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gretap0   Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1462  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb0      Link encap:Ethernet  HWaddr BE:57:15:C4:45:6D
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb1      Link encap:Ethernet  HWaddr E2:56:DE:C2:B5:1B
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1140 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1140 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:80640 (78.7 KiB)  TX bytes:80640 (78.7 KiB)

ptm0      Link encap:Ethernet  HWaddr 00:20:DA:86:23:75
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

teql0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:0C:43:30:92:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

z podpieta linja dsl

97 Odpowiedź przez kudlaty499

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Dane dla lini telefonicznych Netii

Enkapsulacja PPPoE     LLC
VPI    8
VCI    35
ATM class    UBR

98 Odpowiedź przez Scotch

  • Scotch
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-12-05
  • Posty: 334

Odp: zyxel p-2812hnu-f3 POMOC!!!!

Jesteś pewien, że login i hasło dla połączenia masz OK?
Możesz to zweryfikować?

Jeżeli tak, to musisz poczekać do jutra, bo dopiero w nocy mogę sprawdzić mojego Zyxela na linii - może coś nie tak z najnowszym buildem.

P.S. Możesz jeszcze zerknąć w logi systemu i zobaczyć, na czym kończy się próba połączenia z netem - jaki błąd wywala

99 Odpowiedź przez geos

  • geos
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-17
  • Posty: 489

Odp: zyxel p-2812hnu-f3 POMOC!!!!

czy na tym urządzeniu, które używasz obecnie jest zapisany jakiś adres mac? może trzeba ustawić taki sam w openwrt....?
i drugie pytanie: jakie to jest urządzenie, którego używasz? może dałoby się ugryźć temat przez google od strony urządzenia poprawnie działającego z netią...

100 Odpowiedź przez kudlaty499

  • Zarejestrowany: 2015-08-07
  • Posty: 90

Odp: zyxel p-2812hnu-f3 POMOC!!!!

tak na starym routerze jest polaczenie

Sat Aug 15 11:07:12 2015 kern.info kernel: [    4.436000] eth0: port 4 got link
Sat Aug 15 11:07:12 2015 kern.notice kernel: [    4.628000] SCSI subsystem initialized
Sat Aug 15 11:07:12 2015 kern.info kernel: [    4.640000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Aug 15 11:07:12 2015 kern.info kernel: [    4.644000] ehci-platform: EHCI generic platform driver
Sat Aug 15 11:07:12 2015 kern.info kernel: [    4.656000] dwc2 1e101000.ifxhcd: requested GPIO 489
Sat Aug 15 11:07:12 2015 kern.info kernel: [    5.516000] dwc2 1e101000.ifxhcd: DWC OTG Controller
Sat Aug 15 11:07:12 2015 kern.info kernel: [    5.516000] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Sat Aug 15 11:07:12 2015 kern.info kernel: [    5.524000] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Sat Aug 15 11:07:12 2015 kern.err kernel: [    5.532000] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Sat Aug 15 11:07:12 2015 kern.err kernel: [    5.532000] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Sat Aug 15 11:07:12 2015 kern.info kernel: [    5.544000] hub 1-0:1.0: USB hub found
Sat Aug 15 11:07:12 2015 kern.info kernel: [    5.548000] hub 1-0:1.0: 1 port detected
Sat Aug 15 11:07:12 2015 kern.info kernel: [    6.412000] dwc2 1e106000.ifxhcd: DWC OTG Controller
Sat Aug 15 11:07:12 2015 kern.info kernel: [    6.412000] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Sat Aug 15 11:07:12 2015 kern.info kernel: [    6.420000] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Sat Aug 15 11:07:12 2015 kern.err kernel: [    6.428000] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Sat Aug 15 11:07:12 2015 kern.err kernel: [    6.428000] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Sat Aug 15 11:07:12 2015 kern.info kernel: [    6.440000] hub 2-0:1.0: USB hub found
Sat Aug 15 11:07:12 2015 kern.info kernel: [    6.444000] hub 2-0:1.0: 1 port detected
Sat Aug 15 11:07:12 2015 kern.info kernel: [    6.452000] usbcore: registered new interface driver usb-storage
Sat Aug 15 11:07:12 2015 user.info kernel: [    6.740000] init: - preinit -
Sat Aug 15 11:07:12 2015 kern.notice kernel: [    7.208000] random: procd urandom read with 111 bits of entropy available
Sat Aug 15 11:07:12 2015 user.info kernel: [   10.512000] mount_root: loading kmods from internal overlay
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.800000] UBIFS: background thread "ubifs_bgt0_1" started, PID 322
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.828000] UBIFS: recovery needed
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.928000] UBIFS: recovery completed
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.932000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.936000] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.948000] UBIFS: FS size: 119476224 bytes (113 MiB, 926 LEBs), journal size 5935104 bytes (5 MiB, 46 LEBs)
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.956000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.964000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2CF3950F-AD16-44CD-B246-5A2730EFA399, small LPT model
Sat Aug 15 11:07:12 2015 user.info kernel: [   10.976000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sat Aug 15 11:07:12 2015 user.info kernel: [   10.984000] block: extroot: not configured
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.988000] UBIFS: un-mount UBI device 0, volume 1
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   10.992000] UBIFS: background thread "ubifs_bgt0_1" stops
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.024000] UBIFS: background thread "ubifs_bgt0_1" started, PID 324
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.100000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.104000] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.112000] UBIFS: FS size: 119476224 bytes (113 MiB, 926 LEBs), journal size 5935104 bytes (5 MiB, 46 LEBs)
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.124000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.128000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2CF3950F-AD16-44CD-B246-5A2730EFA399, small LPT model
Sat Aug 15 11:07:12 2015 user.info kernel: [   11.276000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sat Aug 15 11:07:12 2015 user.info kernel: [   11.284000] block: extroot: not configured
Sat Aug 15 11:07:12 2015 user.info kernel: [   11.288000] mount_root: switching to jffs2 overlay
Sat Aug 15 11:07:12 2015 user.info kernel: [   11.308000] procd: - early -
Sat Aug 15 11:07:12 2015 user.info kernel: [   11.308000] procd: - watchdog -
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   11.752000] random: nonblocking pool is initialized
Sat Aug 15 11:07:12 2015 user.info kernel: [   12.180000] procd: - ubus -
Sat Aug 15 11:07:12 2015 user.info kernel: [   13.208000] procd: - init -
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.512000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.512000]
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.540000] NET: Registered protocol family 10
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.552000] NET: Registered protocol family 8
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.556000] NET: Registered protocol family 20
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.580000] gre: GRE over IPv4 demultiplexor driver
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.584000] ip_gre: GRE over IPv4 tunneling driver
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.596000] PPP generic driver version 2.4.2
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.612000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.652000] MEI CPE Driver, Version 1.2.0
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.652000]
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.656000] (c) Copyright 2009, Infineon Technologies AG
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.656000]
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.664000]
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.664000]
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.664000] Lantiq CPE API Driver version: DSL CPE API V4.11.4
Sat Aug 15 11:07:12 2015 kern.warn kernel: [   14.688000]
Sat Aug 15 11:07:12 2015 kern.warn kernel: [   14.688000] Predefined debug level: 2
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.856000] u32 classifier
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.856000]     input device check on
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.860000]     Actions configured
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.868000] Mirror/redirect action on
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.968000] netem: version 1.3
Sat Aug 15 11:07:12 2015 kern.info kernel: [   14.984000] fuse init (API version 7.23)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.008000] usbcore: registered new interface driver cdc_acm
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.012000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.024000] usbcore: registered new interface driver cdc_wdm
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.032000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.036000] Backport generated by backports.git backports-20150129-0-gdd4a670
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.052000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.068000] Infineon Technologies DEU driver version 2.0.0
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.076000] IFX DEU DES initialized (multiblock).
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.084000] IFX DEU AES initialized (multiblock).
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.104000] IFX DEU ARC4 initialized (multiblock).
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.104000] IFX DEU SHA1 initialized.
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.108000] IFX DEU MD5 initialized.
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.120000] IFX DEU SHA1_HMAC initialized.
Sat Aug 15 11:07:12 2015 kern.notice kernel: [   15.120000] IFX DEU MD5_HMAC initialized.
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.136000] nf_conntrack version 0.5.0 (1952 buckets, 7808 max)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.172000] PPP MPPE Compression module registered
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.180000] NET: Registered protocol family 24
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.184000] PPTP driver version 0.8.5
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.188000] usbcore: registered new interface driver usblp
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.212000] usbcore: registered new interface driver usbserial
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.216000] usbcore: registered new interface driver usbserial_generic
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.220000] usbserial: USB Serial support registered for generic
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.316000] xt_time: kernel timezone is -0000
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.324000] usbcore: registered new interface driver cdc_ether
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.332000] usbcore: registered new interface driver cdc_ncm
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.392000] cfg80211: Calling CRDA to update world regulatory domain
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.400000] cfg80211: World regulatory domain updated:
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.404000] cfg80211:  DFS Master region: unset
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.408000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.416000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.424000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.432000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.440000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.448000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.460000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.468000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.476000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.512000] usbcore: registered new interface driver huawei_cdc_ncm
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.660000] usbcore: registered new interface driver qmi_wwan
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.668000] usbcore: registered new interface driver rndis_host
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.688000] usbcore: registered new interface driver sierra
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.692000] usbserial: USB Serial support registered for Sierra USB modem
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.700000] usbcore: registered new interface driver sierra_net
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.712000] usbcore: registered new interface driver cdc_mbim
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.720000] usbcore: registered new interface driver option
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.724000] usbserial: USB Serial support registered for GSM modem (1-port)
Sat Aug 15 11:07:12 2015 kern.warn kernel: [   15.752000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Sat Aug 15 11:07:12 2015 kern.err kernel: [   15.756000] rt2800pci 0000:02:00.0: failed to load eeprom property
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.760000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3092.eeprom'.
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.856000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
Sat Aug 15 11:07:12 2015 kern.info kernel: [   15.864000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
Sat Aug 15 11:07:12 2015 kern.debug kernel: [   15.868000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Aug 15 11:07:14 2015 user.emerg syslog: 'radio0' is disabled
Sat Aug 15 11:07:14 2015 user.emerg syslog: 'radio0' is disabled
Sat Aug 15 11:07:16 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Sat Aug 15 11:07:16 2015 daemon.err block: /dev/ubi0_1 is already mounted
Sat Aug 15 11:07:16 2015 kern.info kernel: [   23.084000] PTM 1.0.27    PTM (E1) firmware version 0.30
Sat Aug 15 11:07:16 2015 kern.warn kernel: [   23.088000] ifxmips_ptm: PTM init succeed
Sat Aug 15 11:07:19 2015 authpriv.info dropbear[1132]: Not backgrounding
Sat Aug 15 11:07:19 2015 user.emerg syslog: SQM: Trying to start/stop SQM on all interfaces.
Sat Aug 15 11:07:19 2015 user.notice SQM: Trying to start/stop SQM on all interfaces.
Sat Aug 15 11:07:19 2015 user.emerg syslog: SQM: /usr/lib/sqm/run.sh SQM for interface eth1 is not enabled, skipping over...
Sat Aug 15 11:07:19 2015 user.notice SQM: /usr/lib/sqm/run.sh SQM for interface eth1 is not enabled, skipping over...
Sat Aug 15 11:07:22 2015 kern.info kernel: [   29.008000] device eth0.1 entered promiscuous mode
Sat Aug 15 11:07:22 2015 kern.info kernel: [   29.008000] device eth0 entered promiscuous mode
Sat Aug 15 11:07:22 2015 kern.info kernel: [   29.028000] br-lan: port 1(eth0.1) entered forwarding state
Sat Aug 15 11:07:22 2015 kern.info kernel: [   29.032000] br-lan: port 1(eth0.1) entered forwarding state
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'lan' is enabled
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'lan' is setting up now
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'lan' is now up
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'loopback' is enabled
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'loopback' is now up
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Network device 'eth0' link is up
Sat Aug 15 11:07:22 2015 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Network device 'lo' link is up
Sat Aug 15 11:07:22 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Aug 15 11:07:23 2015 user.notice SQM: Trying to start/stop SQM on interface br-lan
Sat Aug 15 11:07:23 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Aug 15 11:07:24 2015 kern.info kernel: [   31.036000] br-lan: port 1(eth0.1) entered forwarding state
Sat Aug 15 11:07:25 2015 daemon.warn odhcpd[1058]: DHCPV6 SOLICIT IA_NA from 000100011cc6eea5e811327852a0 on br-lan: ok fdad:a645:1a67::928/128
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led internet
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led power
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led power2
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led wireless_green
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led dsl
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led dsl2
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led internet2
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led phone1
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led phone1warn
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led phone2
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led phone2warn
Sat Aug 15 11:07:25 2015 user.emerg syslog: setting up led wireless_red
Sat Aug 15 11:07:26 2015 daemon.warn odhcpd[1058]: DHCPV6 SOLICIT IA_NA from 000100011cc6eea5e811327852a0 on br-lan: ok fdad:a645:1a67::928/128
Sat Aug 15 11:07:26 2015 daemon.info procd: - init complete -
Sat Aug 15 11:07:28 2015 daemon.warn odhcpd[1058]: DHCPV6 SOLICIT IA_NA from 000100011cc6eea5e811327852a0 on br-lan: ok fdad:a645:1a67::928/128
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: started, version 2.73 cachesize 150
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: DNS service limited to local subnets
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq-dhcp[1461]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: using local addresses only for domain lan
Sat Aug 15 11:07:29 2015 daemon.warn dnsmasq[1461]: no servers found in /tmp/resolv.conf.auto, will retry
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: read /etc/hosts - 1 addresses
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: read /tmp/hosts/odhcpd - 0 addresses
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq[1461]: read /tmp/hosts/dhcp - 1 addresses
Sat Aug 15 11:07:29 2015 daemon.info dnsmasq-dhcp[1461]: read /etc/ethers - 0 addresses
Sat Aug 15 11:07:30 2015 daemon.info dnsmasq-dhcp[1461]: DHCPREQUEST(br-lan) 192.168.1.248 e8:11:32:78:52:a0
Sat Aug 15 11:07:30 2015 user.notice SQM: Trying to start/stop SQM on interface lo
Sat Aug 15 11:07:30 2015 daemon.info dnsmasq-dhcp[1461]: DHCPACK(br-lan) 192.168.1.248 e8:11:32:78:52:a0 Pietro-Komputer
Sat Aug 15 11:07:32 2015 daemon.warn odhcpd[1058]: DHCPV6 SOLICIT IA_NA from 000100011cc6eea5e811327852a0 on br-lan: ok fdad:a645:1a67::928/128
Sat Aug 15 11:07:40 2015 daemon.warn odhcpd[1058]: DHCPV6 SOLICIT IA_NA from 000100011cc6eea5e811327852a0 on br-lan: ok fdad:a645:1a67::928/128
Sat Aug 15 11:07:54 2015 kern.warn kernel: [   60.476000] enter showtime
Sat Aug 15 11:07:54 2015 kern.warn kernel: [   60.480000] enter showtime
Sat Aug 15 11:07:56 2015 daemon.warn odhcpd[1058]: DHCPV6 SOLICIT IA_NA from 000100011cc6eea5e811327852a0 on br-lan: ok fdad:a645:1a67::928/128