1 Odpowiedź przez owca_zz

(341 odpowiedzi, napisanych Sprzęt / Hardware)

To proszę o radę, wymienić router, modem, czy też jedno i drugie?

Idź do forum: Sprzęt / Hardware

2 Odpowiedź przez owca_zz

(341 odpowiedzi, napisanych Sprzęt / Hardware)

Cezary napisał/a:

I nie pojawi się, /proc/bus/usb był 10 lat temu w starych kernelach. W hibernacji byłeś.

Do niczego on nie jest Ci potrzebny, a tym bardziej nie do tego żeby modem działał. We współczesnych kernelach jest to /sys/kernel/debug/usb/devices

Czyli pokaż wynik polecenia cat /sys/kernel/debug/usb/devices

Ok, ale na większości przewodników na stronie, opisy wskazywały na  /proc/bus/usb .
O to wynik.

# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.14
S:  Manufacturer=Linux 4.14.48 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=101c0000.ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 4.14
S:  Manufacturer=Linux 4.14.48 ohci_hcd
S:  Product=Generic Platform OHCI controller
S:  SerialNumber=101c1000.ohci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

modem to e3276, mam z nim problem taki że modem łączy się i pracuje poprawnie z routerem ale po czasie coś się dzieje, albo rozłącza go i mruga dioda na modemie, albo modem świeci ciągłym światłem ale nie ma połączenia z internetem.

# 3ginfo test

+CSQ: 28,99
^SYSINFOEX:2,3,0,1,,6,"LTE",101,"LTE"
^CSNR: -145,-32
^LTERSRP:-89,-7
^HCSQ:"LTE",60,52,216,26
^SYSINFO:2,3,0,5,1,,4
+COPS: 0,2,"26001",7
+CREG: 2,1,"5232","0066BD03"
+CGREG: 2,1,"5232","0066BD03"
+CEREG: 2,1,"5232","0066BD03"
+CGEQNEG: 1,2,64000,256000,0,0,0,1500,"1E3","1E5",0,100,2
DEVICE:huawei E3276
---------------------------------------------------------------
/dev/tty      /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9
/dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7    /dev/ttyUSB0
---------------------------------------------------------------

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.14
S:  Manufacturer=Linux 4.14.48 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=101c0000.ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 4.14
S:  Manufacturer=Linux 4.14.48 ohci_hcd
S:  Product=Generic Platform OHCI controller
S:  SerialNumber=101c1000.ohci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
---------------------------------------------------------------
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port='81'
3ginfo.@3ginfo[0].language='pl'
3ginfo.@3ginfo[0].network='wan'
3ginfo.@3ginfo[0].device='/dev/ttyUSB0'

dodawałem Automatyczny restart połączenia, cały czas ten sam problem. 
Konfigurowałem według instrukcji

 # opkg install chat comgt-ncm kmod-usb-net-huawei-cdc-ncm 
    # uci del network.wan
    # uci set network.wan=interface
    # uci set network.wan.proto=ncm
    # uci set network.wan.device=/dev/cdc-wdm0
    # uci set network.wan.pincode=1234
    # uci set network.wan.apn=internet
    # uci commit network
    # reboot

Idź do forum: Sprzęt / Hardware

3 Odpowiedź przez owca_zz

(341 odpowiedzi, napisanych Sprzęt / Hardware)

Hej,

mam problem z tym z uruchomienie na tym routerze modemów Huawei E3276 oraz Huawei E5573.

 BusyBox v1.28.3 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------------------------------
 |                                                                           |
 | LEDE SNAPSHOT, r6807-58f7b5b                                              |
 |                                                                           |
 | Build time: 2018-05-03 08:30 CEST                                         |
 | Cezary Jackiewicz (obsy), http://eko.one.pl                               |
 |                                                                           |
 -----------------------------------------------------------------------------
 | Machine: D-Link DWR-118 A2                                                |
 | Uptime: 0d, 00:02:53                                                      |
 | Load: 0.21 0.21 0.09                                                      |
 | Flash: total: 9.6MB, free: 8.8MB, used: 9%                                |
 | Memory: total: 122.1MB, free: 104.6MB, used: 14%                          |
 | WAN:                                                                      |
 | LAN: 192.168.1.1, leases: 1                                               |
 -----------------------------------------------------------------------------

===

# lsusb -v

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.14
  iManufacturer           3 Linux 4.14.37 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 101c0000.ehci
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             1
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
Device Status:     0x0001
  Self Powered

  ==============================
  root@OpenWrt:~# ls -la /proc/bus/
dr-xr-xr-x    3 root     root             0 Jun 16 13:30 .
dr-xr-xr-x   47 root     root             0 Jan  1  1970 ..
dr-xr-xr-x    4 root     root             0 Jun 16 13:30 pci

nie pojawia się /proc/bus/usb

proszę o jakieś wskazówki jak uruchomić te modemy.
Nad Huawei E3276 panuje, wgrywałem  mu oprogramowanie HiLink i bez HiLink cały czas taki sam wynik.
brak  /proc/bus/usb który jest wymagany jak czytam poradniki.

Idź do forum: Sprzęt / Hardware