Szefie będziesz robił swoje obrazy na 19.07 ?
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania (Strona 1 z 2)
eko.one.pl → Posty przez karolinka
Znalezione posty: 1 do 25 z 30
2 2019-06-11 14:51:31
Odp: Openwrt-19.07 (53 odpowiedzi, napisanych Oprogramowanie / Software)
Ok, tak zrobię.
Mój config.seed bazował na Twoim Cezary dla tego routera plus moduły do obsługi hilinka plus vsftpd i openssh-sftp-server.
CONFIG OPENSSL na 18.06 nie było,teraz to wygląda tak:
CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7621=y
CONFIG_TARGET_ramips_mt7621_DEVICE_r6220=y
CONFIG_ALL_KMODS=y
CONFIG_BUILD_PATENTED=y
CONFIG_IMAGEOPT=y
# CONFIG_KERNEL_KALLSYMS is not set
CONFIG_OPENSSL_ENGINE=y
CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM=y
CONFIG_OPENSSL_WITH_ASM=y
CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y
CONFIG_OPENSSL_WITH_CMS=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_EC=y
CONFIG_OPENSSL_WITH_ERROR_MESSAGES=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_OPENSSL_WITH_TLS13=y
CONFIG_PACKAGE_block-mount=y
CONFIG_PACKAGE_e2fsprogs=y
CONFIG_PACKAGE_ip6tables-extra=m
CONFIG_PACKAGE_ip6tables-mod-nat=m
CONFIG_PACKAGE_iptables-mod-account=m
CONFIG_PACKAGE_iptables-mod-chaos=m
CONFIG_PACKAGE_iptables-mod-checksum=m
CONFIG_PACKAGE_iptables-mod-cluster=m
CONFIG_PACKAGE_iptables-mod-clusterip=m
CONFIG_PACKAGE_iptables-mod-condition=m
CONFIG_PACKAGE_iptables-mod-conntrack-extra=m
CONFIG_PACKAGE_iptables-mod-delude=m
CONFIG_PACKAGE_iptables-mod-dhcpmac=m
CONFIG_PACKAGE_iptables-mod-dnetmap=m
CONFIG_PACKAGE_iptables-mod-extra=m
CONFIG_PACKAGE_iptables-mod-filter=m
CONFIG_PACKAGE_iptables-mod-fuzzy=m
CONFIG_PACKAGE_iptables-mod-geoip=m
CONFIG_PACKAGE_iptables-mod-hashlimit=m
CONFIG_PACKAGE_iptables-mod-iface=m
CONFIG_PACKAGE_iptables-mod-ipmark=m
CONFIG_PACKAGE_iptables-mod-ipopt=m
CONFIG_PACKAGE_iptables-mod-ipp2p=m
CONFIG_PACKAGE_iptables-mod-iprange=m
CONFIG_PACKAGE_iptables-mod-ipsec=m
CONFIG_PACKAGE_iptables-mod-ipv4options=m
CONFIG_PACKAGE_iptables-mod-led=m
CONFIG_PACKAGE_iptables-mod-length2=m
CONFIG_PACKAGE_iptables-mod-logmark=m
CONFIG_PACKAGE_iptables-mod-lscan=m
CONFIG_PACKAGE_iptables-mod-lua=m
CONFIG_PACKAGE_iptables-mod-nat-extra=m
CONFIG_PACKAGE_iptables-mod-nflog=m
CONFIG_PACKAGE_iptables-mod-nfqueue=m
CONFIG_PACKAGE_iptables-mod-physdev=m
CONFIG_PACKAGE_iptables-mod-psd=m
CONFIG_PACKAGE_iptables-mod-quota2=m
CONFIG_PACKAGE_iptables-mod-rpfilter=m
CONFIG_PACKAGE_iptables-mod-sysrq=m
CONFIG_PACKAGE_iptables-mod-tarpit=m
CONFIG_PACKAGE_iptables-mod-tee=m
CONFIG_PACKAGE_iptables-mod-tproxy=m
CONFIG_PACKAGE_iptables-mod-trace=m
CONFIG_PACKAGE_iptables-mod-u32=m
CONFIG_PACKAGE_iptables-mod-ulog=m
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-fs-exfat=m
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-fs-vfat=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-mii=y
CONFIG_PACKAGE_kmod-nls-cp437=y
CONFIG_PACKAGE_kmod-nls-iso8859-1=y
CONFIG_PACKAGE_kmod-nls-utf8=y
CONFIG_PACKAGE_kmod-scsi-core=y
CONFIG_PACKAGE_kmod-usb-ehci=y
CONFIG_PACKAGE_kmod-usb-net=y
CONFIG_PACKAGE_kmod-usb-net-cdc-ether=y
CONFIG_PACKAGE_kmod-usb-storage=y
CONFIG_PACKAGE_kmod-usb-storage-uas=y
CONFIG_PACKAGE_kmod-usb2=y
CONFIG_PACKAGE_libatomic=m
CONFIG_PACKAGE_libblkid=y
CONFIG_PACKAGE_libcomerr=y
CONFIG_PACKAGE_libext2fs=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_librt=y
CONFIG_PACKAGE_libss=y
CONFIG_PACKAGE_libstdcpp=m
CONFIG_PACKAGE_libusb-1.0=y
CONFIG_PACKAGE_libuuid=y
CONFIG_PACKAGE_openssh-sftp-server=y
CONFIG_PACKAGE_sysinfo=y
CONFIG_PACKAGE_usb-modeswitch=y
CONFIG_PACKAGE_vsftpd=y
CONFIG_PACKAGE_zlib=y
CONFIG_VERSIONOPT=y3 2019-06-11 14:39:50
Temat: Openwrt-19.07 (53 odpowiedzi, napisanych Oprogramowanie / Software)
Pojawiła się "gałąź" openwrt-19.07.
Pobrałam źródła,skompilowałam środowisko, a następnie obraz do Netgear R6220.
Pliki wynikowe:
openwrt-19.07-snapshot-r10195-b344ca9ca6-ramips-mt7621-r6220-initramfs-kernel.bin
openwrt-19.07-snapshot-r10195-b344ca9ca6-ramips-mt7621-r6220-squashfs-kernel.bin
openwrt-19.07-snapshot-r10195-b344ca9ca6-ramips-mt7621-r6220-squashfs-rootfs.bin
openwrt-19.07-snapshot-r10195-b344ca9ca6-ramips-mt7621-r6220-squashfs-sysupgrade.bin
Plik sysupgrade ma rozszerzenie BIN...na 18.06 było TAR.
Czy przywrócić orginalny firmware, a potem squashfs-kernel.bin i squashfs-rootfs.bin, czy może wystarczy sysupgrade.bin???
Jestem na openwrt-18.06-snapshot-r7779-5dbac47426
4 2019-04-01 20:27:04
Temat: Toto Link A2000UA (0 odpowiedzi, napisanych Inne)
Ktoś z Was mial do czynienia z tą kartą??
Chcę kupić kartę ac1200 na usb do pceta, budżet kiepski do 100 zł.
Co polecacie do tej kwoty?
5 2019-04-01 17:47:14
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Jeszcze raz dziękuję.
Jeszcze jedna kwestia, nie mogę ustawić wyższego kanału niż 48 na 5ghz.
Jeśli ustawię kanał np 100, nie mam radia 5ghz
root@OpenWrt:~# iw phy1 info
Wiphy phy1
max # scan SSIDs: 4
max scan IEs length: 2247 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
Band 2:
Capabilities: 0x1ff
RX LDPC
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT TX/RX MCS rate indexes supported: 0-15
VHT Capabilities (0x018001b0):
Max MPDU length: 3895
Supported Channel Width: neither 160 nor 80+80
RX LDPC
short GI (80 MHz)
TX STBC
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5180 MHz [36] (20.0 dBm)
* 5200 MHz [40] (20.0 dBm)
* 5220 MHz [44] (20.0 dBm)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (radar detection)
* 5280 MHz [56] (20.0 dBm) (radar detection)
* 5300 MHz [60] (20.0 dBm) (radar detection)
* 5320 MHz [64] (20.0 dBm) (radar detection)
* 5500 MHz [100] (27.0 dBm) (radar detection)
* 5520 MHz [104] (27.0 dBm) (radar detection)
* 5540 MHz [108] (27.0 dBm) (radar detection)
* 5560 MHz [112] (27.0 dBm) (radar detection)
* 5580 MHz [116] (27.0 dBm) (radar detection)
* 5600 MHz [120] (27.0 dBm) (radar detection)
* 5620 MHz [124] (27.0 dBm) (radar detection)
* 5640 MHz [128] (27.0 dBm) (radar detection)
* 5660 MHz [132] (27.0 dBm) (radar detection)
* 5680 MHz [136] (27.0 dBm) (radar detection)
* 5700 MHz [140] (27.0 dBm) (radar detection)
* 5745 MHz [149] (disabled)
* 5765 MHz [153] (disabled)
* 5785 MHz [157] (disabled)
* 5805 MHz [161] (disabled)
* 5825 MHz [165] (disabled)
valid interface combinations:
* #{ IBSS } <= 1, #{ managed, AP, mesh point } <= 8,
total <= 8, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz }
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports VHT-IBSS.config wifi-device 'radio1'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'VHT80'
option disabled '0'
option country 'PL'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'Netgear_R6220'
option encryption 'psk2'6 2019-04-01 17:40:00
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Napisałam tak, bo jestem zielona..... napisałam na tej podstawie......proszę się nie śmiać:)
root@OpenWrt:~# logread | grep err
Mon Apr 1 15:51:52 2019 kern.err kernel: [ 2.759002] cacheinfo: Failed to find cpu0 device node
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.782346] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Mon Apr 1 15:51:56 2019 daemon.err block: /dev/ubiblock0_0 is already mounted on /rom
Mon Apr 1 15:51:56 2019 daemon.err block: /dev/ubi0_1 is already mounted on /overlay
Mon Apr 1 15:51:58 2019 kern.err kernel: [ 22.984038] cdc_ether 1-2.2:1.0 eth1: kevent 12 may have been dropped
Mon Apr 1 15:51:58 2019 kern.err kernel: [ 22.985403] cdc_ether 1-2.2:1.0 eth1: kevent 11 may have been dropped
Mon Apr 1 15:51:58 2019 daemon.err odhcp6c[1495]: Failed to send RS (Address not available)
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Using interface wlan0 with hwaddr 9c:3d:cf:c7:16:18 and ssid "Netgear_R6220"
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Using interface wlan1 with hwaddr 9c:3d:cf:c7:16:1c and ssid "Netgear_R6220"7 2019-04-01 17:34:12
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Wszystko ok, naczytałam się o problemach z wifi, o problemach z podziałem partycji itd,itd, dlatego wrzucilam te logi,żeby kompetentna osoba
sprawdziła, czy wszystko gra.
Teraz wiem, że jest ok. Dziękuję szefie:)
8 2019-04-01 17:27:06
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Przepraszam....moja wina i brak wiedzy.
Rzuć proszę okiem na to:
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 4.14.109 (er2de2@Lenovo) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7628-61323d22c0)) #0 SMP Fri Mar 29 17:04:39 2019
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Netgear R6220
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2} total 2
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 80552020, node_mem_map 81003000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from 0x80555740 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu @8110f000 s26256 r8192 d22896 u57344
[ 0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00041450
[ 0.000000] Readback ErrCtl register=00041450
[ 0.000000] Memory: 123780K/131072K available (4639K kernel code, 236K rwdata, 572K rodata, 236K init, 254K bss, 7292K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.015491] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.087799] pid_max: default: 32768 minimum: 301
[ 0.097097] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.110114] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.125634] Hierarchical SRCU implementation.
[ 0.134886] smp: Bringing up secondary CPUs ...
[ 0.144363] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.144372] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.144383] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.144513] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.204377] Synchronize counters for CPU 1: done.
[ 0.264040] smp: Brought up 1 node, 2 CPUs
[ 0.275507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.294976] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.307195] pinctrl core: initialized pinctrl subsystem
[ 0.318117] NET: Registered protocol family 16
[ 0.333538] FPU Affinity set after 11720 emulations
[ 0.334367] pull PCIe RST: RALINK_RSTCTRL = 0
[ 0.643319] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.653392] ***** Xtal 40MHz *****
[ 0.660115] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.670323] Port 0 N_FTS = 1b105000
[ 0.677218] Port 1 N_FTS = 1b102800
[ 0.684143] Port 2 N_FTS = 1b105000
[ 1.842597] PCIE1 no card, disable it(RST&CLK)
[ 1.851289] -> 12007f2
[ 1.856105] PCIE0 enabled
[ 1.861302] PCIE2 enabled
[ 1.866484] PCI host bridge /pcie@1e140000 ranges:
[ 1.876013] MEM 0x0000000060000000..0x000000006fffffff
[ 1.886366] IO 0x000000001e160000..0x000000001e16ffff
[ 1.896737] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[ 1.922704] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.934178] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.945392] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.957709] PCI host bridge to bus 0000:00
[ 1.965736] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 1.979389] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 1.991126] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 2.004608] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 2.020377] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 2.020418] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.020430] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[ 2.020493] pci 0000:00:00.0: supports D1
[ 2.020502] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.020781] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 2.020819] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.020840] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[ 2.020911] pci 0000:00:01.0: supports D1
[ 2.020925] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 2.021432] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[ 2.021501] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.021559] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 2.021658] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.021863] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.022114] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[ 2.022175] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.022322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.022549] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.022573] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 2.022648] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.035678] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.049493] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.062624] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.076453] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.089927] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 2.104271] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 2.117752] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[ 2.131231] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[ 2.144727] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 2.159234] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 2.173561] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.183402] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.196893] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 2.211238] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[ 2.224715] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.234548] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 2.249625] clocksource: Switched to clocksource GIC
[ 2.261039] NET: Registered protocol family 2
[ 2.270416] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 2.284152] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 2.296762] TCP: Hash tables configured (established 1024 bind 1024)
[ 2.309481] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.320977] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.333612] NET: Registered protocol family 1
[ 2.342191] PCI: CLS 0 bytes, default 32
[ 2.579572] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.590625] Crashlog allocated RAM at address 0x3f00000
[ 2.601243] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 2.622256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.633758] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.657025] io scheduler noop registered
[ 2.664763] io scheduler deadline registered (default)
[ 2.675928] gpio-export gpio_export: 1 gpio(s) exported
[ 2.687121] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.703517] console [ttyS0] disabled
[ 2.710600] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 14, base_baud = 3125000) is a 16550A
[ 2.728505] console [ttyS0] enabled
[ 2.742301] bootconsole [early0] disabled
[ 2.759002] cacheinfo: Failed to find cpu0 device node
[ 2.769282] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.782346] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.796338] Enable NFI Clock
[ 2.802115] # MTK NAND # : Use HW ECC
[ 2.809407] Device not found, ID: c2f1
[ 2.816861] Not Support this Device!
[ 2.824321] chip_mode=00000001
[ 2.830399] Support this Device in MTK table! c2f1
[ 2.840288] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[ 2.853153] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 2.865795] nand: Macronix NAND 128MiB 3,3V 8-bit
[ 2.875156] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.890240] Scanning device for bad blocks
[ 3.064211] Bad eraseblock 700 at 0x000005780000
[ 3.149929] 6 fixed-partitions partitions found on MTD device MT7621-NAND
[ 3.163439] Creating 6 MTD partitions on "MT7621-NAND":
[ 3.173844] 0x000000000000-0x000000100000 : "u-boot"
[ 3.184871] 0x000000100000-0x000000200000 : "SC PID"
[ 3.195790] 0x000000200000-0x000000600000 : "kernel"
[ 3.206765] 0x000000600000-0x000002200000 : "ubi"
[ 3.217357] 0x000002e00000-0x000002f00000 : "factory"
[ 3.228484] 0x000004200000-0x000007e00000 : "reserved"
[ 3.240281] [mtk_nand] probe successfully!
[ 3.249128] Signature matched and data read!
[ 3.257626] load_fact_bbt success 1023
[ 3.265852] libphy: Fixed MDIO Bus: probed
[ 3.342186] libphy: mdio: probed
[ 4.748220] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.760752] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 16
[ 4.780138] NET: Registered protocol family 10
[ 4.790363] Segment Routing with IPv6
[ 4.797729] NET: Registered protocol family 17
[ 4.806698] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.832493] 8021q: 802.1Q VLAN Support v1.8
[ 4.844050] UBI: auto-attach mtd3
[ 4.850696] ubi0: attaching mtd3
[ 5.114374] ubi0: scanning is finished
[ 5.136911] ubi0: attached mtd3 (name "ubi", size 28 MiB)
[ 5.147685] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.161375] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.174883] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.188741] ubi0: good PEBs: 224, bad PEBs: 0, corrupted PEBs: 0
[ 5.200701] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 5.215076] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2007613359
[ 5.233258] ubi0: available PEBs: 0, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20
[ 5.251631] ubi0: background thread "ubi_bgt0d" started, PID 354
[ 5.253471] block ubiblock0_0: created from ubi0:0(rootfs)
[ 5.274549] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 5.288419] hctosys: unable to open rtc device (rtc0)
[ 5.305053] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 5.319963] Freeing unused kernel memory: 236K
[ 5.328810] This architecture does not have kernel memory protection.
[ 5.381201] random: fast init done
[ 5.880221] init: Console is alive
[ 5.887238] init: - watchdog -
[ 6.436424] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
[ 6.860048] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.958954] usbcore: registered new interface driver usbfs
[ 6.970075] usbcore: registered new interface driver hub
[ 6.980801] usbcore: registered new device driver usb
[ 7.014696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.033982] SCSI subsystem initialized
[ 7.044786] ehci-platform: EHCI generic platform driver
[ 7.062902] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.073575] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 7.099812] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 7.118133] xhci-mtk 1e1c0000.xhci: irq 15, io mem 0x1e1c0000
[ 7.130625] hub 1-0:1.0: USB hub found
[ 7.138164] hub 1-0:1.0: 2 ports detected
[ 7.146811] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.157444] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 7.172374] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 7.185387] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.202420] hub 2-0:1.0: USB hub found
[ 7.209989] hub 2-0:1.0: 1 port detected
[ 7.223581] usbcore: registered new interface driver usb-storage
[ 7.237029] usbcore: registered new interface driver uas
[ 7.247879] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.280084] init: - preinit -
[ 7.799743] usb 1-2: new high-speed USB device number 2 using xhci-mtk
[ 8.013696] mtk_soc_eth 1e100000.ethernet: PPE started
[ 8.099450] hub 1-2:1.0: USB hub found
[ 8.107609] hub 1-2:1.0: 4 ports detected
[ 8.118293] random: procd: uninitialized urandom read (4 bytes read)
[ 8.439622] usb 1-2.2: new high-speed USB device number 3 using xhci-mtk
[ 8.657510] usb-storage 1-2.2:1.2: USB Mass Storage device detected
[ 8.670520] scsi host0: usb-storage 1-2.2:1.2
[ 9.750922] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 9.769471] sd 0:0:0:0: [sda] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
[ 9.786324] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 11.263674] mount_root: loading kmods from internal overlay
[ 11.293273] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.308542] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 11.728367] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 500
[ 11.801263] UBIFS (ubi0:1): recovery needed
[ 11.951326] UBIFS (ubi0:1): recovery completed
[ 11.960325] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.975914] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.995655] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[ 12.016258] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
[ 12.029086] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1679E461-F1D6-472C-A4F1-2503CE2778B6, small LPT model
[ 12.053645] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.076367] block: extroot: not configured
[ 12.129856] UBIFS (ubi0:1): un-mount UBI device 0
[ 12.139236] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 12.157567] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 503
[ 12.328569] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 12.344220] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.363964] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[ 12.384567] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
[ 12.397396] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1679E461-F1D6-472C-A4F1-2503CE2778B6, small LPT model
[ 12.629316] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.650946] block: extroot: not configured
[ 12.702428] mount_root: switching to ubifs overlay
[ 12.739376] urandom-seed: Seeding with /etc/urandom.seed
[ 12.821973] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[ 12.843681] procd: - early -
[ 12.849508] procd: - watchdog -
[ 13.315666] random: jshn: uninitialized urandom read (4 bytes read)
[ 13.475919] random: jshn: uninitialized urandom read (4 bytes read)
[ 13.529903] procd: - watchdog -
[ 13.536554] procd: - ubus -
[ 13.557364] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.604113] procd: - init -
[ 14.162766] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.193721] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.215983] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 14.232031] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 14.248117] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.268433] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 14.341071] xt_time: kernel timezone is -0000
[ 14.382970] cdc_ether 1-2.2:1.0 eth1: register 'cdc_ether' at usb-1e1c0000.xhci-2.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[ 14.405679] usbcore: registered new interface driver cdc_ether
[ 14.500173] bus=0x2, slot = 0x1, irq=0xff
[ 14.508391] mt7603e 0000:02:00.0: ASIC revision: 76030010
[ 15.550877] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[ 15.562053] mt7603e 0000:02:00.0: Build Time: 20160107100755
[ 15.609625] mt7603e 0000:02:00.0: firmware init done
[ 15.784950] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.803002] bus=0x1, slot = 0x0, irq=0xff
[ 15.811294] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 16.480218] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[ 16.495919] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 16.506875] mt76x2e 0000:01:00.0: Build: 1
[ 16.515033] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[ 16.549629] mt76x2e 0000:01:00.0: Firmware running!
[ 16.560704] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 16.572747] PPP generic driver version 2.4.2
[ 16.584326] NET: Registered protocol family 24
[ 16.597343] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 22.853029] mtk_soc_eth 1e100000.ethernet: PPE started
[ 22.869444] device eth0 entered promiscuous mode
[ 22.885951] br-lan: port 1(eth0.1) entered blocking state
[ 22.897148] br-lan: port 1(eth0.1) entered disabled state
[ 22.908416] device eth0.1 entered promiscuous mode
[ 22.924588] br-lan: port 1(eth0.1) entered blocking state
[ 22.935432] br-lan: port 1(eth0.1) entered forwarding state
[ 22.946969] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 22.984038] cdc_ether 1-2.2:1.0 eth1: kevent 12 may have been dropped
[ 22.985403] cdc_ether 1-2.2:1.0 eth1: kevent 11 may have been dropped
[ 23.910213] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 26.477503] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 26.499012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.511381] br-lan: port 2(wlan1) entered blocking state
[ 26.522158] br-lan: port 2(wlan1) entered disabled state
[ 26.533344] device wlan1 entered promiscuous mode
[ 26.548659] br-lan: port 3(wlan0) entered blocking state
[ 26.559363] br-lan: port 3(wlan0) entered disabled state
[ 26.570594] device wlan0 entered promiscuous mode
[ 26.580402] br-lan: port 3(wlan0) entered blocking state
[ 26.591060] br-lan: port 3(wlan0) entered forwarding state
[ 27.002521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.667200] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 27.680181] br-lan: port 2(wlan1) entered blocking state
[ 27.690810] br-lan: port 2(wlan1) entered forwarding state
[ 61.595656] random: crng init done
[ 61.602437] random: 6 urandom warning(s) missed due to ratelimiting9 2019-04-01 17:14:16
Odp: Netgear R6220 instalacje OpenWrt (634 odpowiedzi, napisanych Oprogramowanie / Software)
Witam.
Zakupiłam ten router ze słynnej aukcji za 99 zł-wgrany najnowszy 18.06-SNAPSHOT.
Niby wszystko gra, jest internet po wifi i po kablu.
Niestety są też błędy w logach.
"Bać się ich, czy zignorować?
root@OpenWrt:~# logread
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 0.000000] Linux version 4.14.109 (er2de2@Lenovo) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7628-61323d22c0)) #0 SMP Fri Mar 29 17:04:39 2019
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] MIPS: machine is Netgear R6220
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Determined physical RAM map:
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] VPE topology {2} total 2
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Zone ranges:
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] HighMem empty
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Movable zone start for each node
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Early memory node ranges
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 80552020, node_mem_map 81003000
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 0.000000] random: get_random_bytes called from 0x80555740 with crng_init=0
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] percpu: Embedded 14 pages/cpu @8110f000 s26256 r8192 d22896 u57344
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Writing ErrCtl register=00041450
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Readback ErrCtl register=00041450
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Memory: 123780K/131072K available (4639K kernel code, 236K rwdata, 572K rodata, 236K init, 254K bss, 7292K reserved, 0K cma-reserved, 0K highmem)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] NR_IRQS: 256
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.015491] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.087799] pid_max: default: 32768 minimum: 301
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.097097] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.110114] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.125634] Hierarchical SRCU implementation.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.134886] smp: Bringing up secondary CPUs ...
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.144363] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.144372] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.144383] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.144513] CPU1 revision is: 0001992f (MIPS 1004Kc)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.204377] Synchronize counters for CPU 1: done.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.264040] smp: Brought up 1 node, 2 CPUs
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.275507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.294976] futex hash table entries: 512 (order: 2, 16384 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.307195] pinctrl core: initialized pinctrl subsystem
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 0.318117] NET: Registered protocol family 16
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 0.333538] FPU Affinity set after 11720 emulations
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.334367] pull PCIe RST: RALINK_RSTCTRL = 0
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.643319] release PCIe RST: RALINK_RSTCTRL = 7000000
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.653392] ***** Xtal 40MHz *****
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.660115] release PCIe RST: RALINK_RSTCTRL = 7000000
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.670323] Port 0 N_FTS = 1b105000
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.677218] Port 1 N_FTS = 1b102800
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 0.684143] Port 2 N_FTS = 1b105000
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 1.842597] PCIE1 no card, disable it(RST&CLK)
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 1.851289] -> 12007f2
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 1.856105] PCIE0 enabled
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 1.861302] PCIE2 enabled
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.866484] PCI host bridge /pcie@1e140000 ranges:
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.876013] MEM 0x0000000060000000..0x000000006fffffff
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.886366] IO 0x000000001e160000..0x000000001e16ffff
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 1.896737] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.922704] mt7621_gpio 1e000600.gpio: registering 32 gpios
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.934178] mt7621_gpio 1e000600.gpio: registering 32 gpios
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.945392] mt7621_gpio 1e000600.gpio: registering 32 gpios
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.957709] PCI host bridge to bus 0000:00
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.965736] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.979389] pci_bus 0000:00: root bus resource [io 0xffffffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 1.991126] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.004608] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020377] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020418] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020430] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020493] pci 0000:00:00.0: supports D1
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020502] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020781] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020819] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020840] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020911] pci 0000:00:01.0: supports D1
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.020925] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.021432] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.021501] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.021559] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.021658] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.021863] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.022114] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.022175] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.022322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.022549] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.022573] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.022648] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.035678] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.049493] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.062624] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.076453] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.089927] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.104271] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.117752] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.131231] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.144727] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.159234] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.173561] pci 0000:00:00.0: PCI bridge to [bus 01]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.183402] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.196893] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.211238] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.224715] pci 0000:00:01.0: PCI bridge to [bus 02]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.234548] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.249625] clocksource: Switched to clocksource GIC
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.261039] NET: Registered protocol family 2
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.270416] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.284152] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.296762] TCP: Hash tables configured (established 1024 bind 1024)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.309481] UDP hash table entries: 256 (order: 1, 8192 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.320977] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.333612] NET: Registered protocol family 1
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 2.342191] PCI: CLS 0 bytes, default 32
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.579572] 4 CPUs re-calibrate udelay(lpj = 2924544)
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.590625] Crashlog allocated RAM at address 0x3f00000
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.601243] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.622256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.633758] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.657025] io scheduler noop registered
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.664763] io scheduler deadline registered (default)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.675928] gpio-export gpio_export: 1 gpio(s) exported
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.687121] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.703517] console [ttyS0] disabled
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.710600] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 14, base_baud = 3125000) is a 16550A
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.728505] console [ttyS0] enabled
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.742301] bootconsole [early0] disabled
Mon Apr 1 15:51:52 2019 kern.err kernel: [ 2.759002] cacheinfo: Failed to find cpu0 device node
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.769282] cacheinfo: Unable to detect cache hierarchy for CPU 0
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.782346] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.796338] Enable NFI Clock
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.802115] # MTK NAND # : Use HW ECC
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.809407] Device not found, ID: c2f1
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.816861] Not Support this Device!
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.824321] chip_mode=00000001
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.830399] Support this Device in MTK table! c2f1
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 2.840288] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.853153] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.865795] nand: Macronix NAND 128MiB 3,3V 8-bit
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.875156] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 2.890240] Scanning device for bad blocks
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 3.064211] Bad eraseblock 700 at 0x000005780000
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.149929] 6 fixed-partitions partitions found on MTD device MT7621-NAND
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.163439] Creating 6 MTD partitions on "MT7621-NAND":
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.173844] 0x000000000000-0x000000100000 : "u-boot"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.184871] 0x000000100000-0x000000200000 : "SC PID"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.195790] 0x000000200000-0x000000600000 : "kernel"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.206765] 0x000000600000-0x000002200000 : "ubi"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.217357] 0x000002e00000-0x000002f00000 : "factory"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 3.228484] 0x000004200000-0x000007e00000 : "reserved"
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 3.240281] [mtk_nand] probe successfully!
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 3.249128] Signature matched and data read!
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 3.257626] load_fact_bbt success 1023
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 3.265852] libphy: Fixed MDIO Bus: probed
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 3.342186] libphy: mdio: probed
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.748220] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.760752] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 16
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.780138] NET: Registered protocol family 10
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.790363] Segment Routing with IPv6
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.797729] NET: Registered protocol family 17
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.806698] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 4.832493] 8021q: 802.1Q VLAN Support v1.8
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 4.844050] UBI: auto-attach mtd3
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 4.850696] ubi0: attaching mtd3
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.114374] ubi0: scanning is finished
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.136911] ubi0: attached mtd3 (name "ubi", size 28 MiB)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.147685] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.161375] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.174883] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.188741] ubi0: good PEBs: 224, bad PEBs: 0, corrupted PEBs: 0
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.200701] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.215076] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2007613359
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.233258] ubi0: available PEBs: 0, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.251631] ubi0: background thread "ubi_bgt0d" started, PID 354
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 5.253471] block ubiblock0_0: created from ubi0:0(rootfs)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.274549] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 5.288419] hctosys: unable to open rtc device (rtc0)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 5.305053] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 5.319963] Freeing unused kernel memory: 236K
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 5.328810] This architecture does not have kernel memory protection.
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 5.381201] random: fast init done
Mon Apr 1 15:51:52 2019 user.info kernel: [ 5.880221] init: Console is alive
Mon Apr 1 15:51:52 2019 user.info kernel: [ 5.887238] init: - watchdog -
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 6.436424] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
Mon Apr 1 15:51:52 2019 user.info kernel: [ 6.860048] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 6.958954] usbcore: registered new interface driver usbfs
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 6.970075] usbcore: registered new interface driver hub
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 6.980801] usbcore: registered new device driver usb
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.014696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 7.033982] SCSI subsystem initialized
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.044786] ehci-platform: EHCI generic platform driver
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.062902] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.073575] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.099812] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.118133] xhci-mtk 1e1c0000.xhci: irq 15, io mem 0x1e1c0000
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.130625] hub 1-0:1.0: USB hub found
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.138164] hub 1-0:1.0: 2 ports detected
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.146811] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.157444] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.172374] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.185387] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.202420] hub 2-0:1.0: USB hub found
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.209989] hub 2-0:1.0: 1 port detected
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.223581] usbcore: registered new interface driver usb-storage
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.237029] usbcore: registered new interface driver uas
Mon Apr 1 15:51:52 2019 user.info kernel: [ 7.247879] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Apr 1 15:51:52 2019 user.info kernel: [ 7.280084] init: - preinit -
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 7.799743] usb 1-2: new high-speed USB device number 2 using xhci-mtk
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 8.013696] mtk_soc_eth 1e100000.ethernet: PPE started
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 8.099450] hub 1-2:1.0: USB hub found
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 8.107609] hub 1-2:1.0: 4 ports detected
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 8.118293] random: procd: uninitialized urandom read (4 bytes read)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 8.439622] usb 1-2.2: new high-speed USB device number 3 using xhci-mtk
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 8.657510] usb-storage 1-2.2:1.2: USB Mass Storage device detected
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 8.670520] scsi host0: usb-storage 1-2.2:1.2
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 9.750922] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 9.769471] sd 0:0:0:0: [sda] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 9.786324] sd 0:0:0:0: [sda] Attached SCSI removable disk
Mon Apr 1 15:51:52 2019 user.info kernel: [ 11.263674] mount_root: loading kmods from internal overlay
Mon Apr 1 15:51:52 2019 user.info kernel: [ 11.293273] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Mon Apr 1 15:51:52 2019 user.info kernel: [ 11.308542] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 11.728367] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 500
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 11.801263] UBIFS (ubi0:1): recovery needed
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 11.951326] UBIFS (ubi0:1): recovery completed
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 11.960325] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 11.975914] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 11.995655] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.016258] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.029086] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1679E461-F1D6-472C-A4F1-2503CE2778B6, small LPT model
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.053645] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.076367] block: extroot: not configured
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.129856] UBIFS (ubi0:1): un-mount UBI device 0
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.139236] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.157567] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 503
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.328569] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.344220] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.363964] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.384567] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 12.397396] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1679E461-F1D6-472C-A4F1-2503CE2778B6, small LPT model
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.629316] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.650946] block: extroot: not configured
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.702428] mount_root: switching to ubifs overlay
Mon Apr 1 15:51:52 2019 user.warn kernel: [ 12.739376] urandom-seed: Seeding with /etc/urandom.seed
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 12.821973] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.843681] procd: - early -
Mon Apr 1 15:51:52 2019 user.info kernel: [ 12.849508] procd: - watchdog -
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 13.315666] random: jshn: uninitialized urandom read (4 bytes read)
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 13.475919] random: jshn: uninitialized urandom read (4 bytes read)
Mon Apr 1 15:51:52 2019 user.info kernel: [ 13.529903] procd: - watchdog -
Mon Apr 1 15:51:52 2019 user.info kernel: [ 13.536554] procd: - ubus -
Mon Apr 1 15:51:52 2019 kern.notice kernel: [ 13.557364] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Apr 1 15:51:52 2019 user.info kernel: [ 13.604113] procd: - init -
Mon Apr 1 15:51:52 2019 user.info kernel: [ 14.162766] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.193721] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.215983] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.232031] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.248117] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.268433] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.341071] xt_time: kernel timezone is -0000
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.382970] cdc_ether 1-2.2:1.0 eth1: register 'cdc_ether' at usb-1e1c0000.xhci-2.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.405679] usbcore: registered new interface driver cdc_ether
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 14.500173] bus=0x2, slot = 0x1, irq=0xff
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 14.508391] mt7603e 0000:02:00.0: ASIC revision: 76030010
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 15.550877] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 15.562053] mt7603e 0000:02:00.0: Build Time: 20160107100755
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 15.609625] mt7603e 0000:02:00.0: firmware init done
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 15.784950] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Apr 1 15:51:52 2019 kern.warn kernel: [ 15.803002] bus=0x1, slot = 0x0, irq=0xff
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 15.811294] mt76x2e 0000:01:00.0: ASIC revision: 76120044
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.480218] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.495919] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.506875] mt76x2e 0000:01:00.0: Build: 1
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.515033] mt76x2e 0000:01:00.0: Build Time: 201507311614____
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.549629] mt76x2e 0000:01:00.0: Firmware running!
Mon Apr 1 15:51:52 2019 kern.debug kernel: [ 16.560704] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.572747] PPP generic driver version 2.4.2
Mon Apr 1 15:51:52 2019 kern.info kernel: [ 16.584326] NET: Registered protocol family 24
Mon Apr 1 15:51:52 2019 user.info kernel: [ 16.597343] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Apr 1 15:51:53 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Apr 1 15:51:53 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: started, version 2.80 cachesize 150
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: DNS service limited to local subnets
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain test
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain onion
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain localhost
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain local
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain invalid
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain bind
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain lan
Mon Apr 1 15:51:53 2019 daemon.warn dnsmasq[1170]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: read /etc/hosts - 4 addresses
Mon Apr 1 15:51:53 2019 daemon.info dnsmasq[1170]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Apr 1 15:51:53 2019 authpriv.info dropbear[1197]: Not backgrounding
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: tunnel
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: Network device
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: bridge
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: veth
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: macvlan
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: 8021ad
Mon Apr 1 15:51:55 2019 user.notice : Added device handler type: 8021q
Mon Apr 1 15:51:56 2019 daemon.err block: /dev/ubiblock0_0 is already mounted on /rom
Mon Apr 1 15:51:56 2019 daemon.err block: /dev/ubi0_1 is already mounted on /overlay
Mon Apr 1 15:51:57 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Mon Apr 1 15:51:57 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Mon Apr 1 15:51:57 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Mon Apr 1 15:51:57 2019 kern.info kernel: [ 22.853029] mtk_soc_eth 1e100000.ethernet: PPE started
Mon Apr 1 15:51:57 2019 kern.info kernel: [ 22.869444] device eth0 entered promiscuous mode
Mon Apr 1 15:51:58 2019 kern.info kernel: [ 22.885951] br-lan: port 1(eth0.1) entered blocking state
Mon Apr 1 15:51:58 2019 kern.info kernel: [ 22.897148] br-lan: port 1(eth0.1) entered disabled state
Mon Apr 1 15:51:58 2019 kern.info kernel: [ 22.908416] device eth0.1 entered promiscuous mode
Mon Apr 1 15:51:58 2019 kern.info kernel: [ 22.924588] br-lan: port 1(eth0.1) entered blocking state
Mon Apr 1 15:51:58 2019 kern.info kernel: [ 22.935432] br-lan: port 1(eth0.1) entered forwarding state
Mon Apr 1 15:51:58 2019 kern.info kernel: [ 22.946969] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'lan' is enabled
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'lan' is setting up now
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'lan' is now up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' is enabled
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' is now up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'wan' is enabled
Mon Apr 1 15:51:58 2019 kern.err kernel: [ 22.984038] cdc_ether 1-2.2:1.0 eth1: kevent 12 may have been dropped
Mon Apr 1 15:51:58 2019 kern.err kernel: [ 22.985403] cdc_ether 1-2.2:1.0 eth1: kevent 11 may have been dropped
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'wan6' is enabled
Mon Apr 1 15:51:58 2019 daemon.notice netifd: bridge 'br-lan' link is up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Network device 'eth0' link is up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Network device 'lo' link is up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'wan' is setting up now
Mon Apr 1 15:51:58 2019 daemon.notice netifd: VLAN 'eth0.2' link is up
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'wan6' has link connectivity
Mon Apr 1 15:51:58 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Mon Apr 1 15:51:58 2019 daemon.notice netifd: wan (1491): udhcpc: started, v1.28.4
Mon Apr 1 15:51:58 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Apr 1 15:51:58 2019 daemon.err odhcp6c[1495]: Failed to send RS (Address not available)
Mon Apr 1 15:51:59 2019 kern.info kernel: [ 23.910213] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Apr 1 15:51:59 2019 daemon.notice netifd: wan (1491): udhcpc: sending discover
Mon Apr 1 15:51:59 2019 daemon.info procd: - init complete -
Mon Apr 1 15:51:59 2019 daemon.notice netifd: wan (1491): udhcpc: sending select for 192.168.8.100
Mon Apr 1 15:51:59 2019 daemon.notice netifd: wan (1491): udhcpc: lease of 192.168.8.100 obtained, lease time 86400
Mon Apr 1 15:51:59 2019 daemon.notice netifd: Interface 'wan' is now up
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: reading /tmp/resolv.conf.auto
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain test
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain onion
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain localhost
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain local
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain invalid
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain bind
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain lan
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using nameserver 8.8.8.8#53
Mon Apr 1 15:51:59 2019 daemon.info dnsmasq[1170]: using nameserver 8.8.4.4#53
Mon Apr 1 15:52:00 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Apr 1 15:52:00 2019 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Mon Apr 1 15:52:00 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.477503] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.499012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.511381] br-lan: port 2(wlan1) entered blocking state
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.522158] br-lan: port 2(wlan1) entered disabled state
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.533344] device wlan1 entered promiscuous mode
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.548659] br-lan: port 3(wlan0) entered blocking state
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.559363] br-lan: port 3(wlan0) entered disabled state
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.570594] device wlan0 entered promiscuous mode
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.580402] br-lan: port 3(wlan0) entered blocking state
Mon Apr 1 15:52:01 2019 kern.info kernel: [ 26.591060] br-lan: port 3(wlan0) entered forwarding state
Mon Apr 1 15:52:01 2019 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Apr 1 15:52:01 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Apr 1 15:52:01 2019 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->HT_SCAN
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Using interface wlan0 with hwaddr 9c:3d:cf:c7:16:18 and ssid "Netgear_R6220"
Mon Apr 1 15:52:01 2019 daemon.err hostapd: Using interface wlan1 with hwaddr 9c:3d:cf:c7:16:1c and ssid "Netgear_R6220"
Mon Apr 1 15:52:02 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Mon Apr 1 15:52:02 2019 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Apr 1 15:52:02 2019 kern.info kernel: [ 27.002521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Apr 1 15:52:02 2019 daemon.notice netifd: Network device 'wlan0' link is up
Mon Apr 1 15:52:02 2019 kern.info kernel: [ 27.667200] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Mon Apr 1 15:52:02 2019 kern.info kernel: [ 27.680181] br-lan: port 2(wlan1) entered blocking state
Mon Apr 1 15:52:02 2019 kern.info kernel: [ 27.690810] br-lan: port 2(wlan1) entered forwarding state
Mon Apr 1 15:52:02 2019 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Mon Apr 1 15:52:02 2019 daemon.notice hostapd: wlan1: AP-ENABLED
Mon Apr 1 15:52:02 2019 daemon.notice netifd: Network device 'wlan1' link is up
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[1170]: exiting on receipt of SIGTERM
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: started, version 2.80 cachesize 150
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: DNS service limited to local subnets
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq-dhcp[2130]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain test
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain onion
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain localhost
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain local
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain invalid
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain bind
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain lan
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: reading /tmp/resolv.conf.auto
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain test
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain onion
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain localhost
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain local
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain invalid
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain bind
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain lan
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using nameserver 8.8.8.8#53
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: using nameserver 8.8.4.4#53
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: read /etc/hosts - 4 addresses
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq-dhcp[2130]: read /etc/ethers - 0 addresses
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: read /etc/hosts - 4 addresses
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq[2130]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Mon Apr 1 17:50:19 2019 daemon.info dnsmasq-dhcp[2130]: read /etc/ethers - 0 addresses
Mon Apr 1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPDISCOVER(br-lan) 192.168.2.249 f0:76:1c:d4:5b:ee
Mon Apr 1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPOFFER(br-lan) 192.168.2.100 f0:76:1c:d4:5b:ee
Mon Apr 1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPREQUEST(br-lan) 192.168.2.100 f0:76:1c:d4:5b:ee
Mon Apr 1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPACK(br-lan) 192.168.2.100 f0:76:1c:d4:5b:ee Lenovo
Mon Apr 1 17:50:26 2019 daemon.info hostapd: wlan1: STA f4:60:e2:cb:e6:de IEEE 802.11: authenticated
Mon Apr 1 17:50:26 2019 daemon.info hostapd: wlan1: STA f4:60:e2:cb:e6:de IEEE 802.11: associated (aid 1)
Mon Apr 1 17:50:26 2019 daemon.notice hostapd: wlan1: AP-STA-CONNECTED f4:60:e2:cb:e6:de
Mon Apr 1 17:50:26 2019 daemon.info hostapd: wlan1: STA f4:60:e2:cb:e6:de WPA: pairwise key handshake completed (RSN)
Mon Apr 1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPDISCOVER(br-lan) f4:60:e2:cb:e6:de
Mon Apr 1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPOFFER(br-lan) 192.168.2.142 f4:60:e2:cb:e6:de
Mon Apr 1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPREQUEST(br-lan) 192.168.2.142 f4:60:e2:cb:e6:de
Mon Apr 1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPACK(br-lan) 192.168.2.142 f4:60:e2:cb:e6:de
Mon Apr 1 17:50:42 2019 authpriv.info dropbear[2186]: Child connection from 192.168.2.100:44313
Mon Apr 1 17:50:49 2019 authpriv.notice dropbear[2186]: Password auth succeeded for 'root' from 192.168.2.100:44313
Mon Apr 1 17:50:52 2019 kern.notice kernel: [ 61.595656] random: crng init done
Mon Apr 1 17:50:52 2019 kern.notice kernel: [ 61.602437] random: 6 urandom warning(s) missed due to ratelimiting10 2019-01-15 15:09:21
Odp: przenośny router w podróż czyli co kupić stare pytanie (12 odpowiedzi, napisanych Sprzęt / Hardware)
Cezary napisał/a:
Kup gl-inet....
Czy ktoś zna stronę w "polskim internecie", gdzie można kupić sprzęty tej firmy?
11 2018-05-03 18:48:32
Odp: Edycja plików w linuksie. (5 odpowiedzi, napisanych Inne)
Cezary pytam o edycję pod linuksem.
13 2018-05-03 12:18:38
Temat: Edycja plików w linuksie. (5 odpowiedzi, napisanych Inne)
Witam wszystkich.
Zastanawiam się czy można po przesłaniu pliku z routera poprzez scp do laptopa np. pliku wireless z lokalizacji /etc/config/ edytować ten plik w laptopie i przesłać go ponownie do routera.
Edycja w putty poprzez vi nie jest jakaś super trudna, tak tylko się zastanawiam.
W laptopie mam elementary os "loki" (ubuntu 16.04.lts).Domyślny edytor plików to scratch.
14 2018-04-30 18:18:25
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary dobry człowieku gdyby nie Ty to ....
Dziękuję poszło 
Limit działa.Jeszcze raz wielkie dziękuję.
Udanej majówki dla wszystkich.
15 2018-04-30 18:03:14
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary napisał/a:
A teraz sprawdź czy faktycznie działa.
Witam ponownie
Chciałam sprawdzić czy działa i jak zwykle u mnie kłopot.
Na próbę utworzyłam regułę:
RULE=test
PKTS=$(awk '/'$RULE'/{print $2}' /etc/quotas)
BYTES=$(awk '/'$RULE'/{print $3}' /etc/quotas)
IP=$(awk '/01:02:03:04:05:06/{print $1}' /etc/ethers)
QUOTA=$((10 * 1024))
iptables -N $RULE
iptables -A $RULE -m quota --quota $QUOTA -j ACCEPT
iptables -A $RULE -j REJECT
iptables -A forwarding_rule -j $RULE -s $IP
iptables -A forwarding_rule -j $RULE -d $IPPotem /etc/init.d/firewall restart
Wypluwa coś takiego :
iptables v1.4.21: host/network '01:02:03:04:05:06' not found
Try'iptables -h' or 'iptables --help' for more information.
iptables v1.4.21: host/network '01:02:03:04:05:06' not found
Try'iptables -h' or 'iptables --help' for more information.
! Failed with exit code 2
Pomocy
16 2018-04-30 10:10:28
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Kłopot z logicznym myśleniem,to mój znak rozpoznawczy
Dziękuje za pomoc i cierpliwość.
17 2018-04-30 09:45:51
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
RULE=limit2gb
PKTS=$(awk '/'$RULE'/{print $2}' /etc/quotas)
BYTES=$(awk '/'$RULE'/{print $3}' /etc/quotas)
IP=$(awk '/01:02:03:04:05:06/{print $1}' /etc/ethers)
IP=$(awk '/07:08:09:10:11:12/{print $1}' /etc/ethers)
QUOTA=$((2048 * 1024 * 1024))
iptables -N $RULE
iptables -A $RULE -m quota --quota $QUOTA -j ACCEPT
iptables -A $RULE -j REJECT
iptables -A forwarding_rule -j $RULE -s $IP
iptables -A forwarding_rule -j $RULE -d $IP
iptables -A forwarding_rule -j $RULE -s $IP
iptables -A forwarding_rule -j $RULE -d $IPPoprawka reguły, jeśli dobrze to dam wszystkim spokój
18 2018-04-30 08:11:21
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
po porannej burzy mózgu zabrałam się do "pracy"
Mój cel to ustanowienie limitu transferu 2gb dziennie dla dwóch statycznych ip (down+up liczone razem).
Po przekroczeniu limitu,przekierowanie na lokalną stronę z informacją o jego przekroczeniu.
Serwer www utthpd zainstalowany z postu Cezarego.
Statyczne ip ustanowione poleceniem:
echo "01:02:03:04:05:06 192.168.2.200" >> /etc/ethers
echo "07:08:09:10:11:12 192.168.2.220" >> /etc/ethersZawartość pliku /etc/firewall.user:
RULE=limit2gb
PKTS=$(awk '/'$RULE'/{print $2}' /etc/quotas)
BYTES=$(awk '/'$RULE'/{print $3}' /etc/quotas)
IP=$(awk '/01:02:03:04:05:06/{print $1}' /proc/net/arp)
IP=$(awk '/07:08:09:10:11:12/{print $1}' /proc/net/arp)
QUOTA=$((2048 * 1024 * 1024))
iptables -N $RULE
iptables -A $RULE -m quota --quota $QUOTA -j ACCEPT
iptables -A $RULE -j REJECT
iptables -A forwarding_rule -j $RULE -s $IP
iptables -A forwarding_rule -j $RULE -d $IPZawartość skryptu quotas-backup.sh:
#!/bin/sh
RULE=limit2gb
O=$(iptables -vxnL $RULE 2>/dev/null)
PKTS=0
BYTES=0
if [ -n "$O" ]; then
PKTS=$(iptables -vxnL $RULE | awk '/quota:/{print $1}')
[ -z "$PKTS" ] && PKTS=0
BYTES=$(iptables -vxnL $RULE | awk '/quota:/{print $2}')
[ -z "$BYTES" ] && BYTES=0
fi
FBACKUP=/etc/quotas
touch $FBACKUP
sed -i '/'$RULE'/d' $FBACKUP
echo "$RULE $PKTS $BYTES" >> $FBACKUP
QUOTA=$((2047 * 1024 * 1024))
if [ $BYTES -gt $QUOTA ]; then
iptables -t nat -C prerouting_rule -m mac --mac-source 01:02:03:04:05:06 -p tcp --dport 80 -j REDIRECT --to-port 33333 || iptables -t nat -A prerouting_rule -m mac --mac-source 01:02:03:04:05:06 -p tcp --dport 80 -j REDIRECT --to-port 33333
iptables -t nat -C prerouting_rule -m mac --mac-source 07:08:09:10:11:12 -p tcp --dport 80 -j REDIRECT --to-port 33333 || iptables -t nat -A prerouting_rule -m mac --mac-source 07:08:09:10:11:12 -p tcp --dport 80 -j REDIRECT --to-port 33333
else
iptables -t nat -D prerouting_rule -m mac --mac-source 01:02:03:04:05:06 -p tcp --dport 80 -j REDIRECT --to-port 33333 > /dev/null 2>&1
iptables -t nat -D prerouting_rule -m mac --mac-source 07:08:09:10:11:12 -p tcp --dport 80 -j REDIRECT --to-port 33333 > /dev/null 2>&1
fi
exit 0Jak zwykle bardzo proszę o ocenę mojej "pracy"
19 2018-04-30 06:10:51
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
@mar_w
No to ręce mi opadły po Twoim poście 
Mój "plan" zakładał dla dwóch adresów mac łącznie ustanowić dzienny limit 2 gb transferu danych (pobieranie i wysyłanie liczone razem)
20 2018-04-29 19:02:46
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Jeszcze raz dziękuje.
21 2018-04-29 18:41:15
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Dopytam jeszcze czy dobrze rozumiem.
Limit transferu 2gb dziennie dla dwóch adresów mac łącznie.
Po przekroczeniu limitu przekierowanie na stronę z komunikatem o jego przekroczeniu.
Instaluję serwer uhttpd i konfiguruję według Twojego postu powyżej.
Zawartość pliku /etc/firewall.user:
RULE=limit2gb
PKTS=$(awk '/'$RULE'/{print $2}' /etc/quotas)
BYTES=$(awk '/'$RULE'/{print $3}' /etc/quotas)
QUOTA=$((2048 * 1024 * 1024))
iptables -N $RULE
iptables -A $RULE -m quota --quota $QUOTA --set-counters $PKTS $BYTES -j ACCEPT
iptables -A $RULE -j REJECT
iptables -A forwarding_rule -j $RULE -m mac --mac-source 01:02:03:04:05;06
iptables -A forwarding_rule -j $RULE -m mac --mac-source 07:08:09:10:11:12Zawartość skryptu quotas-backup.sh:
#!/bin/sh
RULE=limit2gb
O=$(iptables -vxnL $RULE 2>/dev/null)
PKTS=0
BYTES=0
if [ -n "$O" ]; then
PKTS=$(iptables -vxnL $RULE | awk '/quota:/{print $1}')
[ -z "$PKTS" ] && PKTS=0
BYTES=$(iptables -vxnL $RULE | awk '/quota:/{print $2}')
[ -z "$BYTES" ] && BYTES=0
fi
FBACKUP=/etc/quotas
touch $FBACKUP
sed -i '/'$RULE'/d' $FBACKUP
echo "$RULE $PKTS $BYTES" >> $FBACKUP
QUOTA=$((2047 * 1024 * 1024))
if [ $BYTES -gt $QUOTA ]; then
iptables -t nat -C prerouting_rule -m mac --mac-source 01:02:03:04:05:06 -p tcp --dport 80 -j REDIRECT --to-port 33333 || iptables -t nat -A prerouting_rule -m mac --mac-source 01:02:03:04:05:06 -p tcp --dport 80 -j REDIRECT --to-port 33333
iptables -t nat -C prerouting_rule -m mac --mac-source 07:08:09:10:11:12 -p tcp --dport 80 -j REDIRECT --to-port 33333 || iptables -t nat -A prerouting_rule -m mac --mac-source 07:08:09:10:11:12 -p tcp --dport 80 -j REDIRECT --to-port 33333
else
iptables -t nat -D prerouting_rule -m mac --mac-source 01:02:03:04:05:06 -p tcp --dport 80 -j REDIRECT --to-port 33333 > /dev/null 2>&1
iptables -t nat -D prerouting_rule -m mac --mac-source 07:08:09:10:11:12 -p tcp --dport 80 -j REDIRECT --to-port 33333 > /dev/null 2>&1
fi
exit 0Proszę rzuć fachowym okiem czy nie błądze we mgle
22 2018-04-29 16:34:48
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Dziękuję bardzo za "gotowca podanego na tacy".Prawdę mówiąc brak mi słów by wyrazić podziw dla wiedzy jaką posiadasz i chęci podzielenia się nią z ludzmi. Wielki Szacunek.
23 2018-04-29 14:17:21
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Cezary wspomniałeś na końcu poradnika o lokalnej stronie www z informacją o wykorzystaniu limitu.Jeśli możesz, to poprosze o wskazówki jak się za to zabrać.
24 2018-04-28 11:57:31
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Dziękuję bardzo za poradnik
25 2018-04-28 11:49:44
Odp: Lede-limit pobierania (51 odpowiedzi, napisanych Oprogramowanie / Software)
Przeczytałam dzisiejszy poradnik Cezarego na stronie głównej o blokowaniu użytkowników.
Wypocilam następującą regułę która ma ustanowić limit dzienny transferu 2gb dla dwóch adresów mac łącznie.
# QUOTA=$((2048 * 1024 * 1024))
# iptables -N oliwka_limit2gb
# iptables -A oliwka_limit2gb -m quota --quota $QUOTA -j ACCEPT
# iptables -A oliwka_limit2gb -j REJECT
# iptables -A forwarding_rule -j oliwka_limit2gb -m mac --mac-source 01:02:03:04:05:06
# iptables -A forwarding_rule -j oliwka_limit2gb -m mac --mac-source 07:08:09:10:11:12
Nieśmiało zapytam czy jest dobrze?
Znalezione posty: 1 do 25 z 30
eko.one.pl → Posty przez karolinka
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc