SQM rozwiązało problem. Dziękuję!
Strony 1
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
Opcje wyszukiwania
eko.one.pl → Posty przez pierunie
Znalezione posty: 8
1 2020-12-31 13:36:47
Odp: Mikrotik RB750Gr3 - zatkanie przy ściąganiu plików (2 odpowiedzi, napisanych Sprzęt / Hardware)
2 2020-12-16 15:59:24
Temat: Mikrotik RB750Gr3 - zatkanie przy ściąganiu plików (2 odpowiedzi, napisanych Sprzęt / Hardware)
Przy ściąganiu plików, nawet z niepełną prędkością nie mogę przeglądać stron www - przychodzi informacja o niedostępności DNS. Tak jakby transfer plików zatykał resztę transmisji. Czy da się to jakoś dalej zdiagnozować?
3 2019-09-29 17:28:48
Temat: Mikrotik RB750Gr3 + 19.07-SNAPSHOT - restart routera (1 odpowiedzi, napisanych Sprzęt / Hardware)
Router mi się restartuje w losowych momentach.
Zostawiłem "logread -f" na ssh, żeby zobaczyć czy coś będzie w logu, ale nic nie widać. W pewnym momencie pojawiają się poniższe wpisy, ale nie mają korelacji czasowej z restartem. Czasem router włączy się na parę minut, a czasem przez długi czas działa stabilnie. Jakieś pomysły co z tym fantem zrobić? Jak poszerzyć diagnostykę?
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.402270] ------------[ cut here ]------------
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.406908] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2509 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.413864] invalid inflight: 1 state 1 cwnd 10 mss 1388
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.419148] Modules linked in: qcserial pppoe ppp_async option cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.489628] nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt cdc_wdm cdc_acm fuse ledtrig_usbport gpio_beeper input_core xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.561103] sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.572189] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.143 #0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.578264] Stack : 00000000 00000000 00000000 81222398 00000000 00000000 00000000 00000000
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.586600] 00000000 00000000 00000000 00000000 00000000 00000001 8fc0bd30 ac07f596
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.594938] 8fc0bdc8 00000000 00000000 00004f18 00000038 8049db58 00000007 00000000
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.603273] 00000000 80550000 0008bb1d 00000000 8fc0bd10 00000000 80570000 8050c6a0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.611605] 803cc8bc 000009cd 812223d8 81222398 00000000 802af9e8 00000004 805b0004
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.619937] ...
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.622376] Call Trace:
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.622394] [<8049db58>] 0x8049db58
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.628288] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.631755] [<802af9e8>] 0x802af9e8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.635228] [<800101a0>] 0x800101a0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.638699] [<800101a8>] 0x800101a8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.642170] [<80486a9c>] 0x80486a9c
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.645638] [<800758a0>] 0x800758a0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.649107] [<80032588>] 0x80032588
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.652580] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.656052] [<80032610>] 0x80032610
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.659528] [<803cc8bc>] 0x803cc8bc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.663008] [<803cf3d0>] 0x803cf3d0
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.666478] [<8009d750>] 0x8009d750
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.669947] [<803cf7a8>] 0x803cf7a8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.673420] [<8009dd80>] 0x8009dd80
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.676890] [<803cf770>] 0x803cf770
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.680358] [<8008c2cc>] 0x8008c2cc
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.683829] [<80063018>] 0x80063018
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.687300] [<8008c588>] 0x8008c588
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.690768] [<8007cee8>] 0x8007cee8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.694244] [<804a49b8>] 0x804a49b8
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.697717] [<80036f14>] 0x80036f14
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.701185] [<8025d440>] 0x8025d440
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.704662] [<8000b488>] 0x8000b488
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.708131]
Sun Sep 29 18:19:29 2019 kern.warn kernel: [ 226.709665] ---[ end trace 0dde230055179878 ]---edit: przed ostatnim restartem pojawiły się te wpisy:
Sun Sep 29 18:56:25 2019 kern.alert kernel: [ 2442.525228] CPU 1 Unable to handle kernel paging request at virtual address 00000010, epc == 803be4a0, ra == 803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.535821] Oops[#1]:
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.538087] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.14.143 #0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.545363] task: 8fc3be80 task.stack: 8fc5c000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.549869] $ 0 : 00000000 00000001 0000004a 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.555080] $ 4 : 8ea76f3c 00000001 0000d706 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.560290] $ 8 : 00034501 00000321 811d7440 00000322
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.565501] $12 : 8ea22180 8ea22180 8e9a8e00 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.570712] $16 : 8ea76e40 00001204 6375f4c6 ffffffff
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.575923] $20 : 00001204 00000001 00000000 00000002
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.581133] $24 : 00000000 8034b220
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.586344] $28 : 8fc5c000 8fc0bbb8 00000000 803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.591555] Hi : 0000caa1
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.594419] Lo : 47aec5c8
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.597285] epc : 803be4a0 0x803be4a0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.601098] ra : 803c4104 0x803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.604912] Status: 11007c03 KERNEL EXL IE
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.609082] Cause : 40800008 (ExcCode 02)
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.613066] BadVA : 00000010
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.615931] PrId : 0001992f (MIPS 1004Kc)
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.620003] Modules linked in: qcserial pppoe ppp_async option cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT wireguard usbserial usbnet usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.690391] nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt cdc_wdm cdc_acm fuse ledtrig_usbport gpio_beeper input_core xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ip6_udp_tunnel udp_tunnel tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd ehci_platform
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.761710] sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common mii crc32c_generic
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.772740] Process swapper/1 (pid: 0, threadinfo=8fc5c000, task=8fc3be80, tls=00000000)
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.780788] Stack : 00000204 8034def4 8ea76e40 00000000 8ea76e40 8ea76e40 00001204 803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.789123] 8f346480 8056ba00 00000000 8015000a 00018bc3 8fc0bc74 00000004 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.797457] 80550000 8ea76f3c 00000002 00000001 91946e37 00000000 00000018 91946e37
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.805791] 00000000 91946e37 00000000 00000001 80570000 8050c458 00000000 00000002
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.814125] 00018bc3 00000018 8ee92564 8e9a0600 00000000 00000000 00000001 00000000
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.822457] ...
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.824891] Call Trace:
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.824903] [<8034def4>] 0x8034def4
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.830852] [<803c4104>] 0x803c4104
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.834335] [<8015000a>] 0x8015000a
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.837825] [<803c4efc>] 0x803c4efc
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.841318] [<803c6f34>] 0x803c6f34
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.844788] [<803a98a0>] 0x803a98a0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.848313] [<803d1bc0>] 0x803d1bc0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.851802] [<803d2f18>] 0x803d2f18
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.855307] [<8e86426c>] 0x8e86426c [nf_conntrack_ipv4@8e864000+0x1420]
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.861893] [<803a9da0>] 0x803a9da0
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.865406] [<803aa078>] 0x803aa078
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.868887] [<803a9940>] 0x803a9940
Sun Sep 29 18:56:25 2019 kern.warn kernel: [ 2442.872360] [<803a9c10>] 0x803a9c104 2018-04-02 14:14:31
Odp: extroot i E3372 HiLink [CC] (57 odpowiedzi, napisanych Oprogramowanie / Software)
Zrobiłem extroota zgodnie z poradnikiem i wszystko działa do momentu rozłączenia zasilania, bo kiedy zasilanie wraca, to router nie ma połączenia z kartą SD (?) - lampka SYS miga i nic się nie dzieje, a gdy chcę się zalogować po SSH, to wywala błąd.
Router włącza się poprawnie kiedy najpierw zasilę modem, a dopiero po paru sekundach wepnę zasilanie do routera. Próbowałem majstrować przy skrypcie block i zmienić sleep 1 na sleep 5 albo dać sleep 30 przed pętlą - bez rezultatu.
Wygląda to tak, jakby wcześniej włączał się jakiś inny skrypt block:
root@LEDE:~# logread | grep block
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 7.714109] sd 0:0:0:0: [sda] 3842048 512-byte logical blocks: (1.97 GB/1.83 GiB)
Mon Apr 2 13:58:13 2018 user.info kernel: [ 10.126042] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Mon Apr 2 13:58:13 2018 daemon.err block: /dev/sda is already mounted on /overlay
Mon Apr 2 13:58:14 2018 kern.notice kernel: [ 17.499591] random: nonblocking pool is initialized
Mon Apr 2 13:58:16 2018 daemon.notice procd: /etc/rc.d/S40fstab: /sbin/block: line 2: /tmp/overlay/sbin/usbmode: not found
Mon Apr 2 13:58:17 2018 daemon.err block: /dev/mtdblock2 is already mounted on /rom
Mon Apr 2 13:58:17 2018 daemon.err block: /dev/sda is already mounted on /overlay
Cały logread:
root@LEDE:~# logread
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.000000] Linux version 4.4.120 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3785-ceea0ac) ) #0 Sun Mar 11 08:30:28 2018
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=f0f0f0f0, boardp=f0f0f0f0, parts=f0f0f0f0
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] SoC: Atheros AR7241 rev 1
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 0.000000] No valid device tree found, continuing without
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Zone ranges:
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Movable zone start for each node
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Early memory node ranges
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8043a4d0, node_mem_map 81000000
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-MR3420 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Memory: 27416K/32768K available (3126K kernel code, 166K rwdata, 780K rodata, 336K init, 205K bss, 5352K reserved, 0K cma-reserved)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.007893] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.090597] pid_max: default: 32768 minimum: 301
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.095384] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.101992] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.112807] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.122671] futex hash table entries: 256 (order: -1, 3072 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.130546] NET: Registered protocol family 16
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.137117] MIPS: machine is TP-LINK TL-MR3420
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 0.577312] registering PCI controller with io_map_base unset
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.627026] PCI host bridge to bus 0000:00
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.631137] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.638053] pci_bus 0000:00: root bus resource [io 0x0000]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.643611] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.650402] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.658357] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.658394] pci 0000:00:00.0: fixup device configuration
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.665461] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x1000ffff 64bit]
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.665596] pci 0000:00:00.0: supports D1
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.665620] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.665931] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.665978] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.673296] pci 0000:00:00.0: using irq 40 for pin 1
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.679511] clocksource: Switched to clocksource MIPS
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.686431] NET: Registered protocol family 2
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.692184] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.699157] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.705586] TCP: Hash tables configured (established 1024 bind 1024)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.712090] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.717940] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.724635] NET: Registered protocol family 1
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 0.729104] PCI: CLS 0 bytes, default 32
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 0.735632] Crashlog allocated RAM at address 0x1f00000
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.762620] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.768455] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.781915] io scheduler noop registered
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.785846] io scheduler deadline registered (default)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.791411] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.801874] console [ttyS0] disabled
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.825491] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.834194] console [ttyS0] enabled
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.841212] bootconsole [early0] disabled
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 0.856266] m25p80 spi0.0: found w25q32, expected m25p80
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.861710] m25p80 spi0.0: w25q32 (4096 Kbytes)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.867715] 5 tp-link partitions found on MTD device spi0.0
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.873380] Creating 5 MTD partitions on "spi0.0":
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.878210] 0x000000000000-0x000000020000 : "u-boot"
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.885162] 0x000000020000-0x000000170760 : "kernel"
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.892454] 0x000000170760-0x0000003f0000 : "rootfs"
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.899701] mtd: device 2 (rootfs) set to be root filesystem
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.905442] 1 squashfs-split partitions found on MTD device rootfs
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.911708] 0x000000390000-0x0000003f0000 : "rootfs_data"
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.919355] 0x0000003f0000-0x000000400000 : "art"
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 0.926423] 0x000000020000-0x0000003f0000 : "firmware"
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 0.951154] libphy: ag71xx_mdio: probed
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 1.541001] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 1.583072] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.171212] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.181392] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.190475] NET: Registered protocol family 10
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.200336] NET: Registered protocol family 17
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.204917] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.217803] 8021q: 802.1Q VLAN Support v1.8
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.224512] hctosys: unable to open rtc device (rtc0)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.234750] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 2.244639] Freeing unused kernel memory: 336K
Mon Apr 2 13:58:13 2018 user.info kernel: [ 3.528623] init: Console is alive
Mon Apr 2 13:58:13 2018 user.info kernel: [ 3.532404] init: - watchdog -
Mon Apr 2 13:58:13 2018 user.info kernel: [ 5.181790] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.307270] usbcore: registered new interface driver usbfs
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.312979] usbcore: registered new interface driver hub
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.318442] usbcore: registered new device driver usb
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 5.379877] SCSI subsystem initialized
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.391882] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.400733] ehci-platform: EHCI generic platform driver
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.406112] ehci-platform ehci-platform: EHCI Host Controller
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.411997] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.422141] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.439562] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.447106] hub 1-0:1.0: USB hub found
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.451418] hub 1-0:1.0: 1 port detected
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 5.461424] usbcore: registered new interface driver usb-storage
Mon Apr 2 13:58:13 2018 user.info kernel: [ 5.468347] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Apr 2 13:58:13 2018 user.info kernel: [ 5.478204] init: - preinit -
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.099484] usb 1-1: new high-speed USB device number 2 using ehci-platform
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 6.259788] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.269900] hub 1-1:1.0: USB hub found
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.279873] hub 1-1:1.0: 4 ports detected
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.353126] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.569538] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.689745] usb-storage 1-1.1:1.2: USB Mass Storage device detected
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 6.697146] scsi host0: usb-storage 1-1.1:1.2
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 7.701349] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 7.714109] sd 0:0:0:0: [sda] 3842048 512-byte logical blocks: (1.97 GB/1.83 GiB)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 7.722599] sd 0:0:0:0: [sda] Write Protect is off
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 7.727444] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 7.728339] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 7.748217] sd 0:0:0:0: [sda] Attached SCSI removable disk
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 8.450692] eth0: link up (1000Mbps/Full duplex)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 8.455376] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mon Apr 2 13:58:13 2018 user.info kernel: [ 9.667338] mount_root: loading kmods from internal overlay
Mon Apr 2 13:58:13 2018 user.info kernel: [ 9.698838] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Mon Apr 2 13:58:13 2018 user.info kernel: [ 9.707873] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 10.109936] jffs2: notice: (434) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Apr 2 13:58:13 2018 user.info kernel: [ 10.126042] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 10.202986] EXT4-fs (sda): recovery complete
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 10.207358] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts:
Mon Apr 2 13:58:13 2018 user.notice kernel: [ 10.250690] mount_root: switched to extroot
Mon Apr 2 13:58:13 2018 user.warn kernel: [ 10.260241] urandom-seed: Seeding with /etc/urandom.seed
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 10.341319] eth0: link down
Mon Apr 2 13:58:13 2018 user.info kernel: [ 10.363897] procd: - early -
Mon Apr 2 13:58:13 2018 user.info kernel: [ 10.366997] procd: - watchdog -
Mon Apr 2 13:58:13 2018 user.info kernel: [ 11.092752] procd: - watchdog -
Mon Apr 2 13:58:13 2018 user.info kernel: [ 11.096254] procd: - ubus -
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.227833] random: jshn: uninitialized urandom read (4 bytes read, 55 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.360884] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.370354] random: ubus: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.529364] random: jshn: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.542672] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.560115] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.569217] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.580120] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 kern.notice kernel: [ 11.589214] random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
Mon Apr 2 13:58:13 2018 user.info kernel: [ 11.599272] procd: - init -
Mon Apr 2 13:58:13 2018 user.info kernel: [ 12.642928] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.715051] usbcore: registered new interface driver cdc_wdm
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.742274] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.750407] Backport generated by backports.git backports-20160324-13-g24da7d3c
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.799131] nf_conntrack version 0.5.0 (433 buckets, 1732 max)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.904192] usbcore: registered new interface driver usbserial
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.910318] usbcore: registered new interface driver usbserial_generic
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.917013] usbserial: USB Serial support registered for generic
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.975828] xt_time: kernel timezone is -0000
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 12.999002] cdc_ether 1-1.1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1.1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.010556] usbcore: registered new interface driver cdc_ether
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.039950] usbcore: registered new interface driver cdc_ncm
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.111588] usbcore: registered new interface driver huawei_cdc_ncm
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.126659] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.263779] PPP generic driver version 2.4.2
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.281523] NET: Registered protocol family 24
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.374473] usbcore: registered new interface driver option
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.380310] usbserial: USB Serial support registered for GSM modem (1-port)
Mon Apr 2 13:58:13 2018 kern.warn kernel: [ 13.438937] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.449920] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.458514] ath: EEPROM regdomain: 0x0
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.458529] ath: EEPROM indicates default country code should be used
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.458543] ath: doing EEPROM country->regdmn map search
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.458570] ath: country maps to regdmn code: 0x3a
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.458586] ath: Country alpha2 being used: US
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.458600] ath: Regpair used: 0x3a
Mon Apr 2 13:58:13 2018 kern.debug kernel: [ 13.473192] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Apr 2 13:58:13 2018 kern.info kernel: [ 13.481582] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
Mon Apr 2 13:58:13 2018 user.info kernel: [ 13.560026] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Apr 2 13:58:13 2018 daemon.err block: /dev/sda is already mounted on /overlay
Mon Apr 2 13:58:14 2018 kern.notice kernel: [ 17.499591] random: nonblocking pool is initialized
Mon Apr 2 13:58:16 2018 user.notice : Added device handler type: 8021ad
Mon Apr 2 13:58:16 2018 user.notice : Added device handler type: 8021q
Mon Apr 2 13:58:16 2018 user.notice : Added device handler type: macvlan
Mon Apr 2 13:58:16 2018 user.notice : Added device handler type: bridge
Mon Apr 2 13:58:16 2018 user.notice : Added device handler type: Network device
Mon Apr 2 13:58:16 2018 user.notice : Added device handler type: tunnel
Mon Apr 2 13:58:16 2018 daemon.notice procd: /etc/rc.d/S40fstab: /sbin/block: line 2: /tmp/overlay/sbin/usbmode: not found
Mon Apr 2 13:58:17 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Mon Apr 2 13:58:17 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Mon Apr 2 13:58:17 2018 daemon.err block: /dev/mtdblock2 is already mounted on /rom
Mon Apr 2 13:58:17 2018 daemon.err block: /dev/sda is already mounted on /overlay5 2018-03-31 19:19:33
Temat: TL-MR3420v1 minimalizacja mocy WiFi (1 odpowiedzi, napisanych Oprogramowanie / Software)
Chciałbym uzyskać jak najniższy poziom mocy wyjściowej na routerze.
Ustawiłem odpowiednią linijkę txpower w konfiguracji:
root@LEDE:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option channel '2'
option txpower '0'
option hwmode '11g'
option path 'pci0000:00/0000:00:00.0'
option htmode 'HT20'
option disabled '0'
option country 'PL'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'xxx'
option encryption 'psk2'
option key 'xxx'Po zainstalowaniu wireless-tools spróbowałem też komend:
iw phy phy0 set txpower fixed 0
iw dev wlan0 set txpower fixed 0
iwconfig wlan0 txpower 0Nigdy moc nie zeszła do najniższego poziomu:
root@LEDE:~# iwinfo wlan0 txpowerlist
0 dBm ( 1 mW)
1 dBm ( 1 mW)
2 dBm ( 1 mW)
* 3 dBm ( 1 mW)
4 dBm ( 2 mW)
5 dBm ( 3 mW)
6 dBm ( 3 mW)
7 dBm ( 5 mW)
8 dBm ( 6 mW)
9 dBm ( 7 mW)
10 dBm ( 10 mW)
11 dBm ( 12 mW)
12 dBm ( 15 mW)
13 dBm ( 19 mW)
14 dBm ( 25 mW)
15 dBm ( 31 mW)
16 dBm ( 39 mW)
17 dBm ( 50 mW)
18 dBm ( 63 mW)
19 dBm ( 79 mW)
20 dBm ( 100 mW)Czy da się wycisnąć więcej z routera, żeby obniżyć ten poziom czy to jest już faktyczne minimum?
6 2018-03-31 18:58:29
Odp: TP-Link Archer C50 + E3372 nie HiLink (29 odpowiedzi, napisanych Oprogramowanie / Software)
Zmieniłem fw na HiLink i wszystko lata niesamowicie - szybkość netu podbiła mi kilkukrotnie 
7 2018-03-30 23:24:23
Odp: TP-Link Archer C50 + E3372 nie HiLink (29 odpowiedzi, napisanych Oprogramowanie / Software)
AT^SETPORT="A1,A2;10,16,12,1,A1,A2"
ERRORW takim razie spróbuję zmienić firmware.
8 2018-03-30 21:54:26
Odp: TP-Link Archer C50 + E3372 nie HiLink (29 odpowiedzi, napisanych Oprogramowanie / Software)
Hej,
mam identyczny problem na TL-MR3420v1 + LEDE 17.01 snapshot z eko.one.pl + extroot + E3372h-153 (nie hilink)
Modem działa normalnie pod fabrycznym fw na TL-MR3420v2.
Pod LEDE modem przedstawia się tak:
root@LEDE:cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.04
S: Manufacturer=Linux 4.4.120 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev= 7.02
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 1.02
S: Manufacturer=HUAWEI_MOBILE
S: Product=HUAWEI_MOBILE
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125usPróbowałem łączyć się na różne sposoby (ncm/3g) i na różnych dev (ttyUSB0/ttyUSB1/cdc-wdm0). Zawsze wychodzi jakiś błąd.
Przykładowe zrzuty:
3g:
Fri Mar 30 21:47:34 2018 daemon.notice netifd: Interface 'wan' is setting up now
Fri Mar 30 21:47:38 2018 daemon.notice netifd: wan (1896): SIM ready
Fri Mar 30 21:47:38 2018 daemon.notice netifd: wan (1896): PIN set successfully
Fri Mar 30 21:47:38 2018 daemon.notice pppd[1912]: pppd 2.4.7 started by root, uid 0
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: abort on (BUSY)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: abort on (NO CARRIER)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: abort on (ERROR)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: report (CONNECT)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: timeout set to 10 seconds
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: send (AT&F^M)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: expect (OK)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: AT&F^M^M
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: OK
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: -- got it
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: send (ATE1^M)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: expect (OK)
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: ^M
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: ATE1^M^M
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: OK
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: -- got it
Fri Mar 30 21:47:39 2018 local2.info chat[1914]: send (AT+CGDCONT=1,"IP","internet"^M)
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: timeout set to 30 seconds
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: expect (OK)
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: ^M
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: AT+CGDCONT=1,"IP","internet"^M^M
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: OK
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: -- got it
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: send (ATD*99***1#^M)
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: expect (CONNECT)
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: ^M
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: ATD*99***1#^M^M
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: ERROR
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: -- failed
Fri Mar 30 21:47:40 2018 local2.info chat[1914]: Failed (ERROR)
Fri Mar 30 21:47:40 2018 daemon.err pppd[1912]: Connect script failed
Fri Mar 30 21:47:41 2018 daemon.info pppd[1912]: Exit.
Fri Mar 30 21:47:41 2018 daemon.notice netifd: Interface 'wan' is now downncm/cdc-wdm0:
Fri Mar 30 21:59:16 2018 daemon.notice netifd: Interface 'wan' is setting up now
Fri Mar 30 21:59:18 2018 daemon.notice netifd: wan (1403): Starting network wan
Fri Mar 30 21:59:18 2018 daemon.notice netifd: wan (1403): sending ->
Fri Mar 30 21:59:33 2018 daemon.notice netifd: wan (1403): Timeout running AT-command
Fri Mar 30 21:59:33 2018 daemon.notice netifd: wan (1403): Failed to connect
Fri Mar 30 21:59:33 2018 daemon.notice netifd: wan (1430): Stopping network wan
Fri Mar 30 21:59:34 2018 daemon.notice netifd: wan (1430): sending ->
Fri Mar 30 21:59:38 2018 daemon.notice netifd: Interface 'wan' is now downncm/ttyUSB1:
Fri Mar 30 22:00:24 2018 daemon.notice netifd: Interface 'wan' is setting up now
Fri Mar 30 22:00:27 2018 daemon.notice netifd: wan (1107): sending -> AT
Fri Mar 30 22:00:28 2018 daemon.notice netifd: wan (1107): sending -> ATZ
Fri Mar 30 22:00:29 2018 daemon.notice netifd: wan (1107): sending -> ATQ0
Fri Mar 30 22:00:29 2018 daemon.notice netifd: wan (1107): sending -> ATV1
Fri Mar 30 22:00:30 2018 daemon.notice netifd: wan (1107): sending -> ATE1
Fri Mar 30 22:00:30 2018 daemon.notice netifd: wan (1107): sending -> ATS0=0
Fri Mar 30 22:00:31 2018 daemon.notice netifd: wan (1107): sending -> AT+CGDCONT=1,"IP","internet"
Fri Mar 30 22:00:32 2018 daemon.notice netifd: wan (1107): Starting network wan
Fri Mar 30 22:00:32 2018 daemon.notice netifd: wan (1107): sending -> AT^NDISDUP=1,1,"internet"
Fri Mar 30 22:00:33 2018 daemon.notice netifd: wan (1107): Setting up wwan0
Fri Mar 30 22:00:33 2018 daemon.notice netifd: Interface 'wan' is now up
Fri Mar 30 22:00:33 2018 daemon.notice netifd: Network device 'wwan0' link is up
Fri Mar 30 22:00:33 2018 daemon.notice netifd: Network alias 'wwan0' link is up
Fri Mar 30 22:00:33 2018 daemon.notice netifd: Interface 'wan_4' is enabled
Fri Mar 30 22:00:33 2018 daemon.notice netifd: Interface 'wan_4' has link connectivity
Fri Mar 30 22:00:33 2018 daemon.notice netifd: Interface 'wan_4' is setting up now
Fri Mar 30 22:00:33 2018 daemon.notice netifd: wan (1107): Command failed: Unknown error
Fri Mar 30 22:00:33 2018 daemon.notice netifd: wan_4 (1294): udhcpc: started, v1.25.1
Fri Mar 30 22:00:33 2018 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Fri Mar 30 22:00:34 2018 daemon.notice netifd: wan_4 (1294): udhcpc: sending discover
Fri Mar 30 22:00:37 2018 daemon.notice netifd: wan_4 (1294): udhcpc: sending discover
Fri Mar 30 22:00:40 2018 daemon.notice netifd: wan_4 (1294): udhcpc: sending discoverCiekawostka, po wysłaniu picocomem komendy AT+SETPORT="A1,A2;10,16,12,1,A1,A2" otrzymuję odpowiedź: COMMAND NOT SUPPORT.
Znalezione posty: 8
Strony 1
eko.one.pl → Posty przez pierunie
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc