Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Posty przez jevga
Już pomijając fakt ,że to nielegalne , po co chcesz zmieniać numer imei ? Modem ma pewnie nalepke i tak z prawidłowym.
t-mobile, filter po modelam urządzeń, tz na taryfie L jest dozwolony tylko tablety albo smartphony, tu i pomysł na zmiana IMEI z dlinka na samsung i td.
coś takiego znalazłem, ale to ogólne:
CHECK IMEI CODE:
AT*MRD_IMEI?
CHANGE IMEI CODE:
AT*PROD=2
AT*MRD_IMEI=D
AT*MRD_IMEI=W,0101,01NOV2012,351708070642486
AT*PROD=0
AT*MODEMRESET
AT+ZRESET
Dzień dobry,
Czy z AT komendą to jest możliwa?
Pytam dla tego że t-mobile założyli blokada no korzystanie z routerów lub modemów.
Dziękuje i pozdrawiam,
Jevgenij
Witam,
ktoś jescze ma takie coś?
Mam wyluzowana soc8 i jest uszkodzona.
Dziękuje.
dziekuje 
Cie,
ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:1C:23:3E:E4:F2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
Dzien dobry Cezary,
lspci -n
00:00.0 0600: 8086:27a0 (rev 03)
00:02.0 0300: 8086:27a2 (rev 03)
00:02.1 0380: 8086:27a6 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 01)
00:1c.0 0604: 8086:27d0 (rev 01)
00:1c.1 0604: 8086:27d2 (rev 01)
00:1c.2 0604: 8086:27d4 (rev 01)
00:1d.0 0c03: 8086:27c8 (rev 01)
00:1d.1 0c03: 8086:27c9 (rev 01)
00:1d.2 0c03: 8086:27ca (rev 01)
00:1d.3 0c03: 8086:27cb (rev 01)
00:1d.7 0c03: 8086:27cc (rev 01)
00:1e.0 0604: 8086:2448 (rev e1)
00:1f.0 0601: 8086:27b9 (rev 01)
00:1f.1 0101: 8086:27df (rev 01)
00:1f.3 0c05: 8086:27da (rev 01)
02:01.0 0607: 1180:0476 (rev b4)
02:01.1 0c00: 1180:0552 (rev 09)
02:01.2 0805: 1180:0822 (rev 18)
09:00.0 0200: 14e4:1600 (rev 02)
0b:00.0 0280: 168c:002a (rev 01)
0c:00.0 0280: 168c:0024 (rev 01)
kmod-tg3 - tego nie probowalem
Witam,
mam problem z konfiguracja eth0
czy jest firmware dla:
lspci
09:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02)
0b:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
0c:00.0 Network controller: Qualcomm Atheros AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn]
dmesg | grep Ethernet
[ 5.018929] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 5.060725] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lsmod
ath 24576 5 ath9k,ath9k_common,ath9k_hw,ath5k,ath10k_core
ath10k_core 249856 1 ath10k_pci
ath10k_pci 36864 0
ath5k 147456 0
ath9k 94208 0
ath9k_common 20480 1 ath9k
ath9k_hw 335872 2 ath9k,ath9k_common
b44 32768 0
bcm_phy_lib 12288 1 broadcom
bluetooth 249856 9 rfcomm,hidp,hci_uart,btusb,btintel,bnep
bnep 16384 0
bnx2 69632 0
broadcom 16384 0
btintel 12288 1 btusb
btusb 32768 0
button_hotplug 12288 0
cfg80211 221184 7 ath9k,ath9k_common,ath5k,ath10k_core,ath,rtl8187,mac80211
cmac 12288 0
compat 12288 7 ath9k,ath9k_common,ath5k,ath10k_pci,rtl8187,mac80211,cfg80211
crc_ccitt 12288 1 ppp_async
crypto_acompress 12288 1 lzo
e1000 90112 0
e1000e 147456 0
ecdh_generic 20480 1 bluetooth
eeprom_93cx6 12288 1 rtl8187
ehci_platform 12288 0
evdev 16384 0
fat 49152 1 vfat
hci_uart 20480 0
hidp 20480 0
i2c_algo_bit 12288 1 igb
i2c_dev 12288 0
igb 131072 0
ip_tables 16384 4 iptable_nat,iptable_mangle,iptable_filter
ip6_tables 16384 24 ip6table_mangle,ip6table_filter
ip6t_REJECT 12288 2
ip6table_filter 12288 1
ip6table_mangle 12288 1
ipt_ECN 12288 0
ipt_MASQUERADE 12288 1
ipt_REJECT 12288 2
iptable_filter 12288 1
iptable_mangle 12288 1
iptable_nat 12288 1
irqbypass 12288 1 kvm
kpp 12288 2 bluetooth,ecdh_generic
kvm 290816 1 kvm_intel
kvm_intel 176128 0
ledtrig_usbport 12288 0
libphy 32768 3 b44,broadcom,bcm_phy_lib
lzo 8192 0
lzo_compress 12288 1 lzo
lzo_decompress 12288 1 lzo
mac80211 397312 4 ath9k,ath5k,ath10k_core,rtl8187
mii 12288 2 r8169,b44
nf_conntrack 65536 13 nf_conntrack_ipv6,ipt_MASQUERADE,xt_state,xt_nat,xt_conntrack,xt_REDIRECT,xt_CT,nf_nat_masquerade_ipv4,nf_conntrack_ipv4,nf_nat_ipv4,nf_nat,nf_flow_table,nf_conntrack_rtcache
nf_conntrack_ipv4 12288 11
nf_conntrack_ipv6 12288 5
nf_conntrack_rtcache 12288 0
nf_defrag_ipv4 12288 1 nf_conntrack_ipv4
nf_defrag_ipv6 12288 1 nf_conntrack_ipv6
nf_flow_table 20480 2 xt_FLOWOFFLOAD,nf_flow_table_hw
nf_flow_table_hw 12288 1
nf_log_common 12288 2 nf_log_ipv4,nf_log_ipv6
nf_log_ipv4 12288 0
nf_log_ipv6 12288 0
nf_nat 20480 4 xt_nat,nf_nat_redirect,nf_nat_masquerade_ipv4,nf_nat_ipv4
nf_nat_ipv4 12288 1 iptable_nat
nf_nat_masquerade_ipv4 12288 1 ipt_MASQUERADE
nf_nat_redirect 12288 1 xt_REDIRECT
nf_reject_ipv4 12288 1 ipt_REJECT
nf_reject_ipv6 12288 1 ip6t_REJECT
nls_cp437 16384 0
nls_iso8859_1 12288 0
nls_utf8 12288 0
pcmcia 32768 0
pcmcia_core 16384 1 pcmcia
ppp_async 16384 0
ppp_generic 28672 4 pppoe,ppp_async,pppox,ppp_mppe
ppp_mppe 12288 0
pppoe 16384 0
pppox 12288 1 pppoe
pps_core 12288 1 ptp
ptp 16384 2 e1000e,igb
r8169 65536 0
regmap_mmio 12288 0
rfcomm 32768 0
rtl8187 36864 0
sha1_generic 12288 1 sha1_ssse3
sha1_ssse3 28672 0
slhc 12288 1 ppp_generic
snd 49152 9 snd_pcsp,snd_compress,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
snd_compress 16384 0
snd_hwdep 12288 0
snd_mixer_oss 20480 1 snd_pcm_oss
snd_pcm 61440 2 snd_pcsp,snd_pcm_oss
snd_pcm_oss 36864 0
snd_pcsp 12288 0
snd_rawmidi 20480 0
snd_seq_device 12288 1 snd_rawmidi
snd_timer 24576 1 snd_pcm
soundcore 12288 1 snd
ssb 36864 1 b44
uas 16384 0
vfat 16384 0
x_tables 20480 34 xt_tcpmss,xt_statistic,xt_length,xt_hl,xt_ecn,xt_dscp,xt_HL,xt_DSCP,xt_CLASSIFY,ipt_ECN,ipt_REJECT,ipt_MASQUERADE,xt_time,xt_tcpudp,xt_state,xt_nat,xt_multiport,xt_mark,xt_mac,xt_limit,xt_conntrack,xt_comment,xt_TCPMSS,xt_REDIRECT,xt_LOG,xt_FLOWOFFLOAD,xt_CT,iptable_mangle,iptable_filter,ip_tables,ip6t_REJECT,ip6table_mangle,ip6table_filter,ip6_tables
xhci_plat_hcd 12288 0
xt_CLASSIFY 8192 0
xt_CT 12288 0
xt_DSCP 12288 0
xt_FLOWOFFLOAD 12288 0
xt_HL 12288 0
xt_LOG 12288 0
xt_REDIRECT 12288 0
xt_TCPMSS 12288 2
xt_comment 8192125
xt_conntrack 12288 14
xt_dscp 12288 0
xt_ecn 12288 0
xt_hl 8192 0
xt_length 8192 0
xt_limit 12288 20
xt_mac 8192 0
xt_mark 8192 0
xt_multiport 8192 0
xt_nat 12288 0
xt_state 12288 0
xt_statistic 12288 0
xt_tcpmss 8192 0
xt_tcpudp 8192 10
xt_time 12288 0
lsusb/lspci:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 001 Device 007: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
Bus 001 Device 005: ID 04b3:301b IBM Corp. SK-8815 Keyboard
Bus 001 Device 004: ID 04b3:301a IBM Corp. 2-port low-power hub
Bus 001 Device 003: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0f)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0f)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0f)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0f)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0f)
dmesg:
[ 0.000000] Linux version 4.9.0-8-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000037a76fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037a77000-0x0000000037a7ffff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000037a80000-0x0000000037afffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b00000-0x000000003bb27fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003bb28000-0x000000003bb87fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000003bb88000-0x000000003bda7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003bda8000-0x000000003bda8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003bda9000-0x000000003bda9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003bdaa000-0x000000003bdabfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003bdac000-0x000000003bdacfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003bdad000-0x000000003c7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003cc00000-0x000000003cc3afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003cc3b000-0x000000003cc46fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003cc47000-0x000000003ccb6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ccb7000-0x000000003ccf6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ccf7000-0x000000003ccfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x3ccf6014 ESRT=0x3bc98010 SMBIOS=0x3bd5f000
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3cd00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFD00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 3 base 03D000000 mask FFF000000 uncachable
[ 0.000000] 4 base 03CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 03CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] esrt: Reserving ESRT space from 0x000000003bc98010 to 0x000000003bc98048.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0edfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] BRK [0x0e9c8000, 0x0e9c8fff] PGTABLE
[ 0.000000] BRK [0x0e9c9000, 0x0e9cafff] PGTABLE
[ 0.000000] BRK [0x0e9cb000, 0x0e9cbfff] PGTABLE
[ 0.000000] BRK [0x0e9cc000, 0x0e9ccfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35e7b000-0x36f34fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003CCF6014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000003CCCE188 0000E4 (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000003CCEF000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000003CCDA000 00F0C9 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000003CCF5000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: TCPA 0x000000003CCF4000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000003CCF3000 000055 (v03 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000003CCF2000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: OEM0 0x000000003CCF1000 000084 (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x000000003CCF0000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000003CCEE000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000003CCED000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000003CCEC000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000003CCEB000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000003CCEA000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD9000 000603 (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD6000 00249C (v01 INSYDE DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD5000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD4000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD3000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x000000003CCD2000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD1000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCD0000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000003CCCF000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000003CCCD000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000003CCCC000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000003CCCB000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 83MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000003ccfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000037a76fff]
[ 0.000000] node 0: [mem 0x0000000037b00000-0x000000003bb27fff]
[ 0.000000] node 0: [mem 0x000000003bda8000-0x000000003bda8fff]
[ 0.000000] node 0: [mem 0x000000003bdaa000-0x000000003bdabfff]
[ 0.000000] node 0: [mem 0x000000003bdad000-0x000000003c7fffff]
[ 0.000000] node 0: [mem 0x000000003cc00000-0x000000003cc3afff]
[ 0.000000] node 0: [mem 0x000000003ccf7000-0x000000003ccfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ccfffff]
[ 0.000000] On node 0 totalpages: 246485
[ 0.000000] free_area_init_node: node 0, pgdat ce7fd880, node_mem_map f716a024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 19259 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics memory at 0x000000003cf00000-0x000000003eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f7117000 s50828 r0 d31092 u81920
[ 0.000000] pcpu-alloc: s50828 r0 d31092 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 244482
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686-pae root=UUID=9769a69f-4659-4a00-9738-a4c0200d7e79 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003cd00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 923244K/985940K available (5895K kernel code, 662K rwdata, 1724K rodata, 760K init, 456K bss, 62696K reserved, 0K cma-reserved, 51488K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xce81a000 - 0xce8d8000 ( 760 kB)
.data : 0xce5c22b0 - 0xce818b00 (2394 kB)
.text : 0xce000000 - 0xce5c22b0 (5896 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:1024 0
[ 0.000000] CPU 0 irqstacks, hard=f582e000 soft=f5830000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Detected 1332.800 MHz processor
[ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[ 0.000050] pid_max: default: 32768 minimum: 301
[ 0.000105] ACPI: Core revision 20160831
[ 0.037524] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.038719] Security Framework initialized
[ 0.038724] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.038739] AppArmor: AppArmor disabled by boot time parameter
[ 0.038784] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.038789] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.039352] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.039354] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.039365] mce: CPU supports 6 MCE banks
[ 0.039376] CPU0: Thermal monitoring enabled (TM1)
[ 0.039384] process: using mwait in idle threads
[ 0.039394] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.039398] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.039403] Spectre V2 : Mitigation: Full generic retpoline
[ 0.039404] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.039805] Freeing SMP alternatives memory: 24K
[ 0.042751] ftrace: allocating 24134 entries in 48 pages
[ 0.076810] smpboot: Max logical packages: 1
[ 0.076821] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.076874] TSC deadline timer enabled
[ 0.076878] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[ 0.076889] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.076914] ... version: 3
[ 0.076916] ... bit width: 40
[ 0.076917] ... generic registers: 2
[ 0.076920] ... value mask: 000000ffffffffff
[ 0.076922] ... max period: 0000007fffffffff
[ 0.076923] ... fixed-purpose events: 3
[ 0.076925] ... event mask: 0000000700000003
[ 0.078684] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.079149] CPU 1 irqstacks, hard=f5a06000 soft=f5a08000
[ 0.079152] x86: Booting SMP configuration:
[ 0.079155] .... node #0, CPUs: #1
[ 0.079349] Initializing CPU#1
[ 0.081958] CPU 2 irqstacks, hard=f5a3c000 soft=f5a3e000
[ 0.081962] #2
[ 0.082017] Initializing CPU#2
[ 0.084612] CPU 3 irqstacks, hard=f5a92000 soft=f5a94000
[ 0.084615] #3
[ 0.084668] Initializing CPU#3
[ 0.086889] x86: Booted up 1 node, 4 CPUs
[ 0.086895] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[ 0.088068] devtmpfs: initialized
[ 0.088577] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.088582] PM: Registering ACPI NVS region [mem 0x3cc47000-0x3ccb6fff] (458752 bytes)
[ 0.088750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.088759] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.088874] pinctrl core: initialized pinctrl subsystem
[ 0.089206] NET: Registered protocol family 16
[ 0.101513] cpuidle: using governor ladder
[ 0.113526] cpuidle: using governor menu
[ 0.113615] ACPI: bus type PCI registered
[ 0.113619] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.113777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.113782] PCI: not using MMCONFIG
[ 0.113784] PCI: Using configuration type 1 for base access
[ 0.125914] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.126747] ACPI: Added _OSI(Module Device)
[ 0.126751] ACPI: Added _OSI(Processor Device)
[ 0.126754] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.126757] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154612] ACPI: Dynamic OEM Table Load:
[ 0.154637] ACPI: SSDT 0x00000000F5A9C800 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.155445] ACPI: Dynamic OEM Table Load:
[ 0.155467] ACPI: SSDT 0x00000000F5A9C000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.157103] ACPI: Dynamic OEM Table Load:
[ 0.157123] ACPI: SSDT 0x00000000F5A9EE00 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.157850] ACPI: Dynamic OEM Table Load:
[ 0.157870] ACPI: SSDT 0x00000000F5B23000 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.162612] ACPI: Interpreter enabled
[ 0.162657] ACPI: (supports S0 S5)
[ 0.162661] ACPI: Using IOAPIC for interrupt routing
[ 0.162757] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.171374] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[ 0.171379] PCI: not using MMCONFIG
[ 0.171389] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174851] ACPI: Power Resource [USBC] (on)
[ 0.175863] ACPI: Power Resource [WWPR] (off)
[ 0.184843] ACPI: Power Resource [PLPE] (on)
[ 0.195762] ACPI: Power Resource [CLK0] (on)
[ 0.196044] ACPI: Power Resource [P28P] (off)
[ 0.196187] ACPI: Power Resource [P18P] (off)
[ 0.199585] ACPI: Power Resource [CLK0] (on)
[ 0.199724] ACPI: Power Resource [CLK1] (on)
[ 0.208663] ACPI: Power Resource [P28X] (off)
[ 0.208807] ACPI: Power Resource [P18X] (off)
[ 0.208965] ACPI: Power Resource [P28T] (off)
[ 0.209116] ACPI: Power Resource [P18T] (off)
[ 0.209258] ACPI: Power Resource [P1XT] (off)
[ 0.220647] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.220661] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.220805] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.220815] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.221617] PCI host bridge to bus 0000:00
[ 0.221625] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.221630] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.221635] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.221639] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.221644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.221649] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.221653] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.221658] pci_bus 0000:00: root bus resource [mem 0x48c00000-0x48ffffff window]
[ 0.221662] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000 window]
[ 0.221667] pci_bus 0000:00: root bus resource [mem 0x40000000-0x488ffffe window]
[ 0.221671] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.221677] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.221703] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.221932] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.221953] pci 0000:00:02.0: reg 0x10: [mem 0x48000000-0x483fffff]
[ 0.221970] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x47ffffff pref]
[ 0.221986] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.222237] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.222263] pci 0000:00:14.0: reg 0x10: [mem 0x48800000-0x4880ffff 64bit]
[ 0.222346] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.222556] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.222582] pci 0000:00:1a.0: reg 0x10: [mem 0x48700000-0x487fffff]
[ 0.222597] pci 0000:00:1a.0: reg 0x14: [mem 0x48600000-0x486fffff]
[ 0.222701] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.222913] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.223184] pci_bus 0000:00: on NUMA node 0
[ 0.224214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.224438] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.224658] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.224880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.225101] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.225322] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.225543] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.225764] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.247519] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.247524] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.247528] vgaarb: loaded
[ 0.247530] vgaarb: bridge control possible 0000:00:02.0
[ 0.247660] Registered efivars operations
[ 0.254504] PCI: Using ACPI for IRQ routing
[ 0.254511] PCI: pci_cache_line_size set to 64 bytes
[ 0.254542] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.254551] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.254555] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.254559] e820: reserve RAM buffer [mem 0x37a77000-0x37ffffff]
[ 0.254562] e820: reserve RAM buffer [mem 0x3bb28000-0x3bffffff]
[ 0.254567] e820: reserve RAM buffer [mem 0x3bda9000-0x3bffffff]
[ 0.254570] e820: reserve RAM buffer [mem 0x3bdac000-0x3bffffff]
[ 0.254574] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
[ 0.254580] e820: reserve RAM buffer [mem 0x3cc3b000-0x3fffffff]
[ 0.254586] e820: reserve RAM buffer [mem 0x3cd00000-0x3fffffff]
[ 0.255087] clocksource: Switched to clocksource refined-jiffies
[ 0.275469] VFS: Disk quotas dquot_6.6.0
[ 0.275518] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.275734] pnp: PnP ACPI init
[ 0.275901] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.276103] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.276109] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.276115] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.276120] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.276125] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.276135] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.276489] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.281183] pnp: PnP ACPI: found 3 devices
[ 0.281188] PnPBIOS: Disabled
[ 0.287549] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.287555] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.287559] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.287564] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.287569] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.287574] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.287579] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.287584] pci_bus 0000:00: resource 11 [mem 0x48c00000-0x48ffffff window]
[ 0.287588] pci_bus 0000:00: resource 12 [mem 0x3cf00001-0x3ef00000 window]
[ 0.287593] pci_bus 0000:00: resource 13 [mem 0x40000000-0x488ffffe window]
[ 0.287598] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[ 0.287805] NET: Registered protocol family 2
[ 0.288277] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.288316] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.288375] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288416] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288539] NET: Registered protocol family 1
[ 0.288573] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.288992] PCI: CLS 64 bytes, default 64
[ 0.289125] Unpacking initramfs...
[ 1.078521] Freeing initrd memory: 17128K
[ 1.079704] audit: initializing netlink subsys (disabled)
[ 1.079740] audit: type=2000 audit(1544474233.004:1): initialized
[ 1.080618] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.080717] zbud: loaded
[ 1.082575] bounce: pool size: 64 pages
[ 1.082615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.082708] io scheduler noop registered
[ 1.082711] io scheduler deadline registered
[ 1.082758] io scheduler cfq registered (default)
[ 1.082954] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.082971] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.083052] efifb: probing for efifb
[ 1.083089] efifb: framebuffer at 0x40000000, using 2432k, total 2432k
[ 1.083092] efifb: mode is 1024x600x32, linelength=4096, pages=1
[ 1.083094] efifb: scrolling: redraw
[ 1.083098] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.092810] Console: switching to colour frame buffer device 128x37
[ 1.102114] fb0: EFI VGA frame buffer device
[ 1.102139] intel_idle: MWAIT substates: 0x33000020
[ 1.102143] intel_idle: v0.4.1 model 0x37
[ 1.102637] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.107732] GHES: HEST is not enabled!
[ 1.108592] isapnp: Scanning for PnP cards...
[ 1.463414] isapnp: No Plug & Play device found
[ 1.463808] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.484090] 00:02: ttyS0 at I/O 0x3f8 (irq = 201, base_baud = 115200) is a 16550A
[ 1.506002] 80860F0A:00: ttyS1 at MMIO 0x4891b000 (irq = 191, base_baud = 2764800) is a 16550A
[ 1.528830] 80860F0A:01: ttyS2 at MMIO 0x4891d000 (irq = 192, base_baud = 2764800) is a 16550A
[ 1.529699] hpet: number irqs doesn't agree with number of timers
[ 1.529786] Linux agpgart interface v0.103
[ 1.531564] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.566503] i8042: No controller found
[ 2.567017] mousedev: PS/2 mouse device common for all mice
[ 2.567319] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.567334] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[ 2.567358] intel_pstate: Intel P-state driver initializing
[ 2.570354] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.573871] NET: Registered protocol family 10
[ 2.576172] mip6: Mobile IPv6
[ 2.576185] NET: Registered protocol family 17
[ 2.576224] mpls_gso: MPLS GSO support
[ 2.578069] microcode: sig=0x30678, pf=0x2, revision=0x82b
[ 2.579159] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.579179] Using IPI No-Shortcut mode
[ 2.581602] registered taskstats version 1
[ 2.581701] zswap: loaded using pool lzo/zbud
[ 2.583217] ima: No TPM chip found, activating TPM-bypass!
[ 2.583231] ima: Allocated hash algorithm: sha256
[ 2.585242] rtc_cmos 00:00: setting system clock to 2018-12-10 20:37:14 UTC (1544474234)
[ 2.585435] PM: Hibernation image not present or could not be loaded.
[ 2.586348] Freeing unused kernel memory: 760K
[ 2.587008] Write protecting the kernel text: 5900k
[ 2.587650] Write protecting the kernel read-only data: 1728k
[ 2.587652] NX-protecting the kernel data: 4340k
[ 2.588138] ------------[ cut here ]------------
[ 2.588147] WARNING: CPU: 3 PID: 1 at /build/linux-QmD0TC/linux-4.9.130/arch/x86/mm/dump_pagetables.c:227 note_page+0x692/0x860
[ 2.588151] x86/mm: Found insecure W+X mapping at address f8230000/0xf8230000
[ 2.588153] Modules linked in:
[ 2.588160] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.9.0-8-686-pae #1 Debian 4.9.130-2
[ 2.588162] Hardware name: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[ 2.588165] f58f5ecc ce2fd562 f58f5ee0 00000000 ce06944a ce6b12f4 f58f5f00 00000001
[ 2.588175] ce6b132c 000000e3 ce060ac2 000000e3 00000009 ce060ac2 00000002 f58f5f64
[ 2.588184] 00000000 f58f5eec ce0694b6 00000009 00000000 f58f5ee0 ce6b12f4 f58f5f00
[ 2.588193] Call Trace:
[ 2.588200] [<ce2fd562>] ? dump_stack+0x55/0x73
[ 2.588205] [<ce06944a>] ? __warn+0xea/0x110
[ 2.588209] [<ce060ac2>] ? note_page+0x692/0x860
[ 2.588212] [<ce060ac2>] ? note_page+0x692/0x860
[ 2.588216] [<ce0694b6>] ? warn_slowpath_fmt+0x46/0x60
[ 2.588220] [<ce060ac2>] ? note_page+0x692/0x860
[ 2.588224] [<ce060f55>] ? ptdump_walk_pgd_level_core+0x2c5/0x300
[ 2.588230] [<ce5b8020>] ? rest_init+0x70/0x70
[ 2.588234] [<ce5b804c>] ? kernel_init+0x2c/0x100
[ 2.588239] [<ce093701>] ? schedule_tail+0x11/0x50
[ 2.588242] [<ce5b8020>] ? rest_init+0x70/0x70
[ 2.588246] [<ce5bf13c>] ? ret_from_fork+0x30/0x3c
[ 2.588249] ---[ end trace 1e2512a4c0e4f63a ]---
[ 2.588381] x86/mm: Checked W+X mappings: FAILED, 105 W+X pages found.
[ 2.682205] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.682912] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.690044] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.777011] sdhci: Secure Digital Host Controller Interface driver
[ 2.777015] sdhci: Copyright(c) Pierre Ossman
[ 2.803802] [Firmware Bug]: No valid trip found
[ 2.807882] ACPI: bus type USB registered
[ 2.807949] usbcore: registered new interface driver usbfs
[ 2.807980] usbcore: registered new interface driver hub
[ 2.808070] usbcore: registered new device driver usb
[ 2.810879] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.810896] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.812011] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 2.812020] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.812264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.812269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.812272] usb usb1: Product: xHCI Host Controller
[ 2.812275] usb usb1: Manufacturer: Linux 4.9.0-8-686-pae xhci-hcd
[ 2.812278] usb usb1: SerialNumber: 0000:00:14.0
[ 2.812651] hub 1-0:1.0: USB hub found
[ 2.812676] hub 1-0:1.0: 6 ports detected
[ 2.813968] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 2.839145] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 2.864391] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 2.948626] mmc0: new high speed SDIO card at address 0001
[ 3.027392] [Firmware Bug]: No valid trip found
[ 3.138928] mmc2: new high speed SDHC card at address aaaa
[ 3.141276] mmcblk2: mmc2:aaaa SL32G 28.8 GiB
[ 3.154727] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[ 3.155192] clocksource: Switched to clocksource tsc
[ 3.169561] mmc1: new HS200 MMC card at address 0001
[ 3.171993] mmcblk1: mmc1:0001 NCard 14.5 GiB
[ 3.172779] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
[ 3.173755] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
[ 3.174700] mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB
[ 3.179372] mmcblk2: p1
[ 3.181951] random: fast init done
[ 3.182209] mmcblk1: p1 p2 p3
[ 3.379827] ------------[ cut here ]------------
[ 3.379857] WARNING: CPU: 0 PID: 95 at /build/linux-QmD0TC/linux-4.9.130/drivers/pinctrl/intel/pinctrl-baytrail.c:987 byt_gpio_request_enable+0x92/0xc0
[ 3.379862] Modules linked in: mmc_block crc32c_intel aesni_intel xts aes_i586 lrw gf128mul ablk_helper cryptd xhci_pci(+) xhci_hcd usbcore usb_common thermal sdhci_acpi i2c_designware_platform sdhci i2c_designware_core mmc_core
[ 3.379952] CPU: 0 PID: 95 Comm: systemd-udevd Tainted: G W 4.9.0-8-686-pae #1 Debian 4.9.130-2
[ 3.379958] Hardware name: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[ 3.379965] f52eb2a4 ce2fd562 00000000 00000000 ce06944a ce6b7c14 00000000 0000005f
[ 3.379996] ce7062e8 000003db ce334902 000003db 00000009 ce334902 f5a9f80c 00000064
[ 3.380026] f5a9f8dc f52eb2b8 ce06955a 00000009 00000000 00000000 f52eb2e4 ce334902
[ 3.380055] Call Trace:
[ 3.380076] [<ce2fd562>] ? dump_stack+0x55/0x73
[ 3.380092] [<ce06944a>] ? __warn+0xea/0x110
[ 3.380107] [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[ 3.380119] [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[ 3.380133] [<ce06955a>] ? warn_slowpath_null+0x2a/0x30
[ 3.380146] [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[ 3.380160] [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[ 3.380172] [<ce331445>] ? pin_request+0x155/0x2b0
[ 3.380185] [<ce30d313>] ? kvasprintf+0x43/0x90
[ 3.380198] [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[ 3.380210] [<ce331c1c>] ? pinmux_request_gpio+0x4c/0x80
[ 3.380223] [<ce32ee78>] ? pinctrl_request_gpio+0xf8/0x180
[ 3.380236] [<ce338a34>] ? __gpiod_request+0x64/0xe0
[ 3.380247] [<ce339026>] ? gpiochip_request_own_desc+0x36/0x70
[ 3.380261] [<ce33f650>] ? acpi_gpio_adr_space_handler+0x150/0x300
[ 3.380276] [<ce33f500>] ? acpi_can_fallback_to_crs.part.5+0xd0/0xd0
[ 3.380289] [<ce3a47bb>] ? acpi_ev_address_space_dispatch+0x1d0/0x224
[ 3.380302] [<ce33f500>] ? acpi_can_fallback_to_crs.part.5+0xd0/0xd0
[ 3.380316] [<ce3a7eed>] ? acpi_ex_access_region+0x18d/0x1e7
[ 3.380329] [<ce3a7cfc>] ? acpi_ex_write_data_to_field+0x188/0x1ec
[ 3.380343] [<ce3aba0e>] ? acpi_ex_store_object_to_node+0x127/0x14b
[ 3.380356] [<ce3abae1>] ? acpi_ex_store+0xaf/0x20c
[ 3.380369] [<ce3a9779>] ? acpi_ex_opcode_1A_1T_1R+0x486/0x59b
[ 3.380385] [<ce3a19ca>] ? acpi_ds_exec_end_op+0xbd/0x37d
[ 3.380397] [<ce3b30d3>] ? acpi_ps_parse_loop+0x48b/0x4ed
[ 3.380410] [<ce3b3acf>] ? acpi_ps_parse_aml+0x8a/0x23d
[ 3.380423] [<ce3b4232>] ? acpi_ps_execute_method+0x12d/0x15d
[ 3.380434] [<ce3aeeb5>] ? acpi_ns_evaluate+0x193/0x21a
[ 3.380446] [<ce3b1873>] ? acpi_evaluate_object+0x121/0x205
[ 3.380459] [<ce39bbe4>] ? acpi_power_on_unlocked.part.2+0x24/0x40
[ 3.380470] [<ce39bc47>] ? acpi_power_on+0x47/0x60
[ 3.380482] [<ce39bd26>] ? acpi_power_on_list+0x26/0x60
[ 3.380494] [<ce39c47f>] ? acpi_power_transition+0xcf/0x110
[ 3.380508] [<ce38aa45>] ? acpi_os_signal_semaphore+0x45/0x50
[ 3.380521] [<ce38dec9>] ? acpi_device_set_power+0x249/0x2b0
[ 3.380533] [<ce390970>] ? acpi_initialize_hp_context+0x50/0x50
[ 3.380546] [<ce38df60>] ? acpi_bus_set_power+0x30/0x50
[ 3.380584] [<f86cd88b>] ? usb_acpi_set_power_state+0x4b/0xf0 [usbcore]
[ 3.380598] [<ce391245>] ? acpi_get_device_data.constprop.10+0x25/0x60
[ 3.380622] [<f8703a2b>] ? xhci_hub_control+0xb6b/0x1890 [xhci_hcd]
[ 3.380644] [<f8703a2b>] ? xhci_hub_control+0xb6b/0x1890 [xhci_hcd]
[ 3.380666] [<f8704276>] ? xhci_hub_control+0x13b6/0x1890 [xhci_hcd]
[ 3.380680] [<ce09ceaf>] ? set_next_entity+0x28f/0x740
[ 3.380693] [<ce1c4aa0>] ? __kmalloc+0xc0/0x4f0
[ 3.380707] [<ce5bf0f3>] ? __switch_to_asm+0x33/0x4c
[ 3.380717] [<ce5bf0e7>] ? __switch_to_asm+0x27/0x4c
[ 3.380729] [<ce5b0003>] ? packet_sendmsg+0xac3/0x1280
[ 3.380765] [<f86bb6a7>] ? usb_hcd_submit_urb+0x197/0xad0 [usbcore]
[ 3.380789] [<f8702ec0>] ? xhci_test_and_clear_bit+0x30/0x30 [xhci_hcd]
[ 3.380823] [<f86bb77d>] ? usb_hcd_submit_urb+0x26d/0xad0 [usbcore]
[ 3.380835] [<ce021f36>] ? __switch_to+0x106/0x540
[ 3.380852] [<ce5bb011>] ? _cond_resched+0x31/0x40
[ 3.380863] [<ce5bb7ac>] ? wait_for_completion_timeout+0x2c/0x100
[ 3.380899] [<f86bd993>] ? usb_start_wait_urb+0x53/0x150 [usbcore]
[ 3.380912] [<ce09b693>] ? check_preempt_wakeup+0x183/0x230
[ 3.380948] [<f86bdb54>] ? usb_control_msg+0xc4/0x120 [usbcore]
[ 3.380979] [<f86b0d10>] ? set_port_feature+0x50/0x60 [usbcore]
[ 3.381011] [<f86b44bd>] ? hub_power_on+0x4d/0x100 [usbcore]
[ 3.381043] [<f86b49f3>] ? hub_activate+0x483/0x650 [usbcore]
[ 3.381065] [<f86f75ca>] ? xhci_update_hub_device+0x1a/0x470 [xhci_hcd]
[ 3.381079] [<ce442702>] ? rpm_idle+0x182/0x260
[ 3.381114] [<f86b89f2>] ? hub_probe+0x872/0xdc0 [usbcore]
[ 3.381131] [<ce44398b>] ? __pm_runtime_set_status+0x1bb/0x280
[ 3.381144] [<ce4422c9>] ? pm_runtime_enable+0x19/0x80
[ 3.381178] [<f86c21b4>] ? usb_probe_interface+0x144/0x2d0 [usbcore]
[ 3.381190] [<ce259bc5>] ? sysfs_create_link+0x25/0x50
[ 3.381204] [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[ 3.381216] [<ce438bd7>] ? __device_attach_driver+0x87/0x110
[ 3.381229] [<ce5b7a66>] ? klist_next+0x16/0xf0
[ 3.381241] [<ce438b50>] ? __driver_attach+0xf0/0xf0
[ 3.381252] [<ce4366a2>] ? bus_for_each_drv+0x52/0x90
[ 3.381264] [<ce4384a5>] ? __device_attach+0xc5/0x140
[ 3.381275] [<ce438b50>] ? __driver_attach+0xf0/0xf0
[ 3.381288] [<ce3009c0>] ? kobj_ns_drop+0x50/0x50
[ 3.381300] [<ce4377e7>] ? bus_probe_device+0x77/0x90
[ 3.381311] [<ce435690>] ? device_add+0x390/0x600
[ 3.381346] [<f86bdb6c>] ? usb_control_msg+0xdc/0x120 [usbcore]
[ 3.381381] [<f86c00ae>] ? usb_set_configuration+0x47e/0x8c0 [usbcore]
[ 3.381417] [<f86cacdc>] ? generic_probe+0x2c/0x90 [usbcore]
[ 3.381429] [<ce437da2>] ? driver_sysfs_add+0x62/0x80
[ 3.381441] [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[ 3.381453] [<ce438bd7>] ? __device_attach_driver+0x87/0x110
[ 3.381466] [<ce5b7a66>] ? klist_next+0x16/0xf0
[ 3.381477] [<ce438b50>] ? __driver_attach+0xf0/0xf0
[ 3.381488] [<ce4366a2>] ? bus_for_each_drv+0x52/0x90
[ 3.381500] [<ce4384a5>] ? __device_attach+0xc5/0x140
[ 3.381511] [<ce438b50>] ? __driver_attach+0xf0/0xf0
[ 3.381523] [<ce3009c0>] ? kobj_ns_drop+0x50/0x50
[ 3.381536] [<ce4377e7>] ? bus_probe_device+0x77/0x90
[ 3.381546] [<ce435690>] ? device_add+0x390/0x600
[ 3.381580] [<f86b579d>] ? usb_new_device+0x1dd/0x4a0 [usbcore]
[ 3.381612] [<f86b581b>] ? usb_new_device+0x25b/0x4a0 [usbcore]
[ 3.381647] [<f86bf127>] ? usb_get_device_descriptor+0x67/0x90 [usbcore]
[ 3.381680] [<f86bb0cd>] ? usb_add_hcd+0x51d/0x960 [usbcore]
[ 3.381715] [<f86ccb4a>] ? usb_hcd_pci_probe+0x1fa/0x5b0 [usbcore]
[ 3.381731] [<ce257625>] ? kernfs_add_one+0xf5/0x160
[ 3.381750] [<f872c990>] ? trace_xhci_dbg_quirks+0x60/0x60 [xhci_pci]
[ 3.381765] [<f872c9bd>] ? xhci_pci_probe+0x2d/0x22a [xhci_pci]
[ 3.381781] [<f872c990>] ? trace_xhci_dbg_quirks+0x60/0x60 [xhci_pci]
[ 3.381795] [<ce34dd18>] ? pci_device_probe+0x88/0x100
[ 3.381806] [<ce259bc5>] ? sysfs_create_link+0x25/0x50
[ 3.381820] [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[ 3.381833] [<ce34d9de>] ? pci_match_device+0xde/0x100
[ 3.381845] [<ce438b49>] ? __driver_attach+0xe9/0xf0
[ 3.381856] [<ce436d00>] ? unbind_store+0x110/0x110
[ 3.381869] [<ce5b7a66>] ? klist_next+0x16/0xf0
[ 3.381881] [<ce438a60>] ? driver_probe_device+0x460/0x460
[ 3.381892] [<ce4365ea>] ? bus_for_each_dev+0x5a/0xa0
[ 3.381904] [<ce437fee>] ? driver_attach+0x1e/0x20
[ 3.381915] [<ce438a60>] ? driver_probe_device+0x460/0x460
[ 3.381926] [<ce437abf>] ? bus_add_driver+0x17f/0x270
[ 3.381940] [<ce43945d>] ? driver_register+0x5d/0xf0
[ 3.381950] [<f8731000>] ? 0xf8731000
[ 3.381962] [<ce002195>] ? do_one_initcall+0x45/0x180
[ 3.381974] [<ce4f240b>] ? netlink_broadcast_filtered+0x11b/0x380
[ 3.381988] [<ce16b714>] ? do_init_module+0x21/0x1c7
[ 3.381999] [<ce16b743>] ? do_init_module+0x50/0x1c7
[ 3.382011] [<ce0f6e3a>] ? load_module+0x209a/0x26e0
[ 3.382030] [<ce0f76a0>] ? SyS_finit_module+0xb0/0x100
[ 3.382046] [<ce003728>] ? do_fast_syscall_32+0x98/0x160
[ 3.382059] [<ce5bf1c2>] ? sysenter_past_esp+0x47/0x75
[ 3.382069] ---[ end trace 1e2512a4c0e4f63b ]---
[ 3.382085] byt_gpio INT33FC:00: pin 100 forcibly re-configured as GPIO
[ 3.383326] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.383356] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.383770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.383784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.383795] usb usb2: Product: xHCI Host Controller
[ 3.383805] usb usb2: Manufacturer: Linux 4.9.0-8-686-pae xhci-hcd
[ 3.383815] usb usb2: SerialNumber: 0000:00:14.0
[ 3.385121] hub 2-0:1.0: USB hub found
[ 3.385187] hub 2-0:1.0: 1 port detected
[ 3.502004] PM: Starting manual resume from disk
[ 3.502021] PM: Hibernation image partition 179:258 present
[ 3.502027] PM: Looking for hibernation image.
[ 3.503120] PM: Image not found (code -22)
[ 3.503124] PM: Hibernation image not present or could not be loaded.
[ 3.707419] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.762693] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.849543] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.849555] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.849563] usb 1-1: Product: USB2.0 Hub
[ 3.850731] hub 1-1:1.0: USB hub found
[ 3.851125] hub 1-1:1.0: 4 ports detected
[ 4.098367] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.139305] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 4.154727] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.155507] systemd[1]: Detected architecture x86.
[ 4.156076] systemd[1]: Set hostname to <debian>.
[ 4.382919] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.383705] systemd[1]: Created slice System Slice.
[ 4.385766] systemd[1]: Mounting Huge Pages File System...
[ 4.387957] systemd[1]: Mounting Debug File System...
[ 4.388387] systemd[1]: Listening on Journal Audit Socket.
[ 4.388504] systemd[1]: Reached target User and Group Name Lookups.
[ 4.388728] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.451465] EXT4-fs (mmcblk1p3): re-mounted. Opts: errors=remount-ro
[ 4.496543] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0119
[ 4.496550] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.496553] usb 1-1.1: Product: USB2.0-CRW
[ 4.496557] usb 1-1.1: Manufacturer: Generic
[ 4.496560] usb 1-1.1: SerialNumber: 20090815198100000
[ 4.540637] systemd-journald[211]: Received request to flush runtime journal from PID 1
[ 4.579103] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd
[ 4.680344] usb 1-1.2: New USB device found, idVendor=04b3, idProduct=301a
[ 4.680350] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.680354] usb 1-1.2: Product: USB 1.1 2port downstream low power hub
[ 4.680357] usb 1-1.2: Manufacturer: Lite-On Technology
[ 4.681639] hub 1-1.2:1.0: USB hub found
[ 4.681818] hub 1-1.2:1.0: 3 ports detected
[ 4.717041] SCSI subsystem initialized
[ 4.727399] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 4.734802] scsi host0: usb-storage 1-1.1:1.0
[ 4.735045] usbcore: registered new interface driver usb-storage
[ 4.738042] usbcore: registered new interface driver uas
[ 4.749749] ACPI: AC Adapter [ADP1] (off-line)
[ 4.776699] ACPI: Battery Slot [BMBT] (battery present)
[ 4.803412] ------------[ cut here ]------------
[ 4.803424] WARNING: CPU: 2 PID: 260 at /build/linux-QmD0TC/linux-4.9.130/drivers/pinctrl/intel/pinctrl-baytrail.c:987 byt_gpio_request_enable+0x92/0xc0
[ 4.803426] Modules linked in: bmc150_accel_i2c(+) soc_button_array(+) processor_thermal_device snd_pcm(+) bmc150_accel_core int3403_thermal acpi_thermal_rel intel_soc_dts_iosf int340x_thermal_zone industrialio_triggered_buffer kfifo_buf snd_timer battery dptf_power industrialio snd soundcore acpi_pad ac uas usb_storage scsi_mod rtlwifi mac80211 cfg80211 rfkill efivarfs ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb mbcache mmc_block crc32c_intel aesni_intel xts aes_i586 lrw gf128mul ablk_helper cryptd xhci_pci xhci_hcd usbcore usb_common thermal sdhci_acpi i2c_designware_platform sdhci i2c_designware_core mmc_core
[ 4.803500] CPU: 2 PID: 260 Comm: systemd-udevd Tainted: G W 4.9.0-8-686-pae #1 Debian 4.9.130-2
[ 4.803502] Hardware name: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[ 4.803505] f6917b3c ce2fd562 00000000 00000000 ce06944a ce6b7c14 00000002 00000104
[ 4.803516] ce7062e8 000003db ce334902 000003db 00000009 ce334902 f5bc670c 00000015
[ 4.803525] f5bc67dc f6917b50 ce06955a 00000009 00000000 00000000 f6917b7c ce334902
[ 4.803534] Call Trace:
[ 4.803544] [<ce2fd562>] ? dump_stack+0x55/0x73
[ 4.803551] [<ce06944a>] ? __warn+0xea/0x110
[ 4.803555] [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[ 4.803559] [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[ 4.803564] [<ce06955a>] ? warn_slowpath_null+0x2a/0x30
[ 4.803568] [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[ 4.803572] [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[ 4.803576] [<ce331445>] ? pin_request+0x155/0x2b0
[ 4.803581] [<ce30d313>] ? kvasprintf+0x43/0x90
[ 4.803586] [<ce33f1ac>] ? acpi_get_gpiod_by_index+0x9c/0x160
[ 4.803589] [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[ 4.803593] [<ce331c1c>] ? pinmux_request_gpio+0x4c/0x80
[ 4.803598] [<ce32ee78>] ? pinctrl_request_gpio+0xf8/0x180
[ 4.803602] [<ce33fc26>] ? acpi_find_gpio+0x176/0x1d0
[ 4.803606] [<ce338a34>] ? __gpiod_request+0x64/0xe0
[ 4.803610] [<ce33c44a>] ? gpiod_request+0xfa/0x170
[ 4.803615] [<ce33d0fe>] ? gpiod_get_index+0x18e/0x320
[ 4.803620] [<ce43c14f>] ? devres_add+0x2f/0x40
[ 4.803628] [<f8f9c0ff>] ? soc_button_probe+0xcf/0x257 [soc_button_array]
[ 4.803632] [<ce43a955>] ? platform_drv_probe+0x35/0x90
[ 4.803636] [<ce437da2>] ? driver_sysfs_add+0x62/0x80
[ 4.803640] [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[ 4.803646] [<ce38ff82>] ? acpi_driver_match_device+0x22/0x70
[ 4.803650] [<ce438b49>] ? __driver_attach+0xe9/0xf0
[ 4.803654] [<ce436d00>] ? unbind_store+0x110/0x110
[ 4.803658] [<ce5b7a66>] ? klist_next+0x16/0xf0
[ 4.803662] [<ce5b7ac0>] ? klist_next+0x70/0xf0
[ 4.803666] [<ce438a60>] ? driver_probe_device+0x460/0x460
[ 4.803669] [<ce4365ea>] ? bus_for_each_dev+0x5a/0xa0
[ 4.803673] [<ce437fee>] ? driver_attach+0x1e/0x20
[ 4.803677] [<ce438a60>] ? driver_probe_device+0x460/0x460
[ 4.803680] [<ce437abf>] ? bus_add_driver+0x17f/0x270
[ 4.803684] [<f8fa1000>] ? 0xf8fa1000
[ 4.803688] [<ce43945d>] ? driver_register+0x5d/0xf0
[ 4.803691] [<f8fa1000>] ? 0xf8fa1000
[ 4.803695] [<ce002195>] ? do_one_initcall+0x45/0x180
[ 4.803701] [<ce16b714>] ? do_init_module+0x21/0x1c7
[ 4.803704] [<ce16b743>] ? do_init_module+0x50/0x1c7
[ 4.803709] [<ce0f6e3a>] ? load_module+0x209a/0x26e0
[ 4.803715] [<ce0f76a0>] ? SyS_finit_module+0xb0/0x100
[ 4.803719] [<ce00314f>] ? syscall_trace_enter+0x16f/0x260
[ 4.803724] [<ce003728>] ? do_fast_syscall_32+0x98/0x160
[ 4.803728] [<ce5bf1c2>] ? sysenter_past_esp+0x47/0x75
[ 4.803732] ---[ end trace 1e2512a4c0e4f63c ]---
[ 4.803739] byt_gpio INT33FC:02: pin 21 forcibly re-configured as GPIO
[ 4.859598] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 4.881506] [drm] Initialized
[ 4.901479] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 4.948349] EFI Variables Facility v0.08 2004-May-17
[ 4.955732] [drm] Memory usable by graphics device = 2048M
[ 4.955741] checking generic (40000000 260000) vs hw (40000000 8000000)
[ 4.955744] fb: switching to inteldrmfb from EFI VGA
[ 4.955838] Console: switching to colour dummy device 80x25
[ 4.962992] [drm] Replacing VGA console driver
[ 4.963570] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.963572] [drm] Driver supports precise vblank timestamp query.
[ 4.964386] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.964889] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
[ 4.967106] usb 1-1.2.1: new full-speed USB device number 5 using xhci_hcd
[ 4.969073] pstore: using zlib compression
[ 4.969099] pstore: Registered efi as persistent store backend
[ 4.979341] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[ 4.979553] intel_sst_acpi 80860F28:00: LPE base: 0x48a00000 size:0x200000
[ 4.979557] intel_sst_acpi 80860F28:00: IRAM base: 0x48ac0000
[ 4.979584] intel_sst_acpi 80860F28:00: DRAM base: 0x48b00000
[ 4.979595] intel_sst_acpi 80860F28:00: SHIM base: 0x48b40000
[ 4.979607] intel_sst_acpi 80860F28:00: Mailbox base: 0x48b44000
[ 4.979617] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[ 4.985646] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[ 4.991754] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 5.005240] intel_sst_acpi 80860F28:00: firmware: direct-loading firmware intel/fw_sst_0f28.bin
[ 5.035837] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.037284] acpi device:21: registered as cooling_device7
[ 5.037463] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 5.038921] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 5.042808] Adding 2999292k swap on /dev/mmcblk1p2. Priority:-1 extents:1 across:2999292k SSFS
[ 5.068548] usb 1-1.2.1: New USB device found, idVendor=04b3, idProduct=301b
[ 5.068555] usb 1-1.2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 5.068558] usb 1-1.2.1: Product: USB Productivity Option Keyboard( has the hub in # 1 )
[ 5.068562] usb 1-1.2.1: Manufacturer: Lite-On Technology
[ 5.071876] intel_rapl: Found RAPL domain package
[ 5.071882] intel_rapl: Found RAPL domain core
[ 5.123913] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input2
[ 5.124128] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input3
[ 5.129469] iTCO_vendor_support: vendor-support=0
[ 5.142362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.142469] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 5.147332] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.158794] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 5.158800] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[ 5.158803] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF2 enabled
[ 5.158806] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 5.158813] bytcr_rt5640 bytcr_rt5640: Failed to get MCLK from pmc_plt_clk_3: -2
[ 5.158839] bytcr_rt5640: probe of bytcr_rt5640 failed with error -2
[ 5.189221] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.198653] usbcore: registered new interface driver usbhid
[ 5.198663] usbhid: USB HID core driver
[ 5.205293] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:04B3:301B.0001/input/input4
[ 5.263876] hid-generic 0003:04B3:301B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:14.0-1.2.1/input0
[ 5.264394] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:04B3:301B.0002/input/input5
[ 5.323743] hid-generic 0003:04B3:301B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:14.0-1.2.1/input1
[ 5.432227] fbcon: inteldrmfb (fb0) is primary device
[ 5.752098] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 5.764187] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.566322] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
[ 6.566761] sd 0:0:0:0: [sda] Write Protect is off
[ 6.566777] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 6.567265] sd 0:0:0:0: [sda] No Caching mode page found
[ 6.567276] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.574594] sda: sda1 sda2
[ 6.576911] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.938764] Console: switching to colour frame buffer device 128x37
[ 6.972767] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.964282] random: crng init done
[ 14.964294] random: 7 urandom warning(s) missed due to ratelimiting
[ 29.235201] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 29.254804] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 29.267411] ISO 9660 Extensions: RRIP_1991A
[ 29.286985] fuse init (API version 7.26)
[ 41.511666] usb 1-1.4: new low-speed USB device number 6 using xhci_hcd
[ 41.617907] usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=0005
[ 41.617925] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 41.617936] usb 1-1.4: Product: USB Optical Mouse
[ 41.627651] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1BCF:0005.0003/input/input6
[ 41.629874] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1.4/input0
[ 54.827697] usb 1-1.3: new high-speed USB device number 7 using xhci_hcd
[ 54.937529] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0119
[ 54.937547] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 54.937558] usb 1-1.3: Product: USB2.0-CRW
[ 54.937568] usb 1-1.3: Manufacturer: Generic
[ 54.937578] usb 1-1.3: SerialNumber: 20090815198100000
[ 54.941692] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 54.942281] scsi host1: usb-storage 1-1.3:1.0
[ 55.959746] scsi 1:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 55.963898] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 56.626858] sd 1:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.97 GB/3.69 GiB)
[ 56.629342] sd 1:0:0:0: [sdb] Write Protect is off
[ 56.629362] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 56.629930] sd 1:0:0:0: [sdb] No Caching mode page found
[ 56.629955] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 56.641007] sdb: sdb1
[ 56.644949] sd 1:0:0:0: [sdb] Attached SCSI removable disk
UPDATE. mam na eksperymenty 4 ustrojstwa
Witam,
pod Windowsem:
do I2C controller jest połączeni:
1 camera OV2680
2 camera + Realtek I2S Audio codec
3 BMA2x2 accelerometer
4 KMDF HID Touch I2C Device
5 Battery ACPI + Intel battery management + Intel Power Management IC
Do host Intel SD:
1 NCard
2 RTL8723BS
3 Generic SD Card
UART Controller:
Reaktek Bluetooth UART BUS driver -> Bluetooth
Pod androidem 4.4.4 r5 i 7.1 r2
Dzilala touch screen, wifi, BT, audio (speaker only), screen rotation.
FW /system/lib/fimeware
*******************************************************************************
Na Debiane nie działa:
touch screen, wifi, BT, audio, acpi (power)
*******************************************************************************
Czy da się wykorzystać android image 7.1 jego FW dla Debiana?
Czy jest jakiś sposób na uruchomienie ww urządzeń po Debianem?
lscpi i lsusb dmesg nic czekawego nie pokazuja ( przynajmej mi ).
Dziekuje,
BR,
Zenia
dziękuje, ssh to host only
dziekuje Cezary
Witam,
uzywam kali/debian/ubuntu dla audyta biezpieczenstwa zaspbow sieciowych firmy "iis, apache ssl / non ssl" mysql, oracleDB, F5, checkpoint.
client <-> server
na chipy altheros jest instalki dsniff / mitmproxy, czy moge poprosic o dokompilowania ich to x86 gerneric?
czy dasie zainstalowac prosty Xorg, intel i915/945?
Dziekuje,
BR,
Jevgenij
Witam,
nie znalazlem nic na necie, a wiec pytam.
Mam openwrt (generic) na eeepc 1000h, i potrzebuje prezelaczac konsole jak w debiane/ubuntu. Czy dasie to wlaczyc?
Dziekuje,
BR,
Jevgenij
Witam,
Wymontawalem ogniwa z 1 rocznej baterii 1x2 1x2 1x2 = 11.1 4400mah
napiecze na parach:
1p - 3,73
2p - 3,50
3p - 2,55 !
przyliutowalem do docelowej elektroniki
p - para
k - (-/+(minus/plus kontrolny) miezy napiecze pomiedzy parami)
+(1p)(-k)(2p)(+k)(3p)-
(4.2 volt max, ladowanie li-ion ogniw)
do 3p podlaczylem napiecze na 5v 1A na 1 godzina. (sprawdzam miernikiem napieczie rosnie po ~0.1 volt od 2,56 i w gore)
do 2p podlaczylem napiecze na 5v 1A na 15 min, napieczie rosnie.
1p - 3,73
2p - 3,70
3p - 3,69
laptop widzi napieczie ogniw ktora powoli spada,
start:
11.125 volt
~15 min
11.9 volt
----------------------------------------------------
test na innych (starych) pojedynczych
1 - 1 - 1 = 11,1 2200mah
napieczy rosnie:
start:
9,97 volt
~30 min
10.9 volt
----------------------------------------------------
Pytanie, kontynuowac zabawa:
Spadek napieczia, why?
Kupic 3x ext ladowarka do li-ion i sprobawac naladowac (ogniwa).
Kupic nowe ogniwa (od 15zł za sztuka).
Poddac sie:
Kupuc nowy akumulator s nieznanymi ogniwami, zamiennik kosztuje od 100 zł
BR,
Jevgenij
dip:x:30:jevga
jestem, ale
pod userem:
pon vpn
ping 192.168.5.70 - timeout
druga konsola (root):
ifconfig - brak ppp0
/etc/init.d/cron reload - brak efektu ppp0.
tcpdump icmp - widze ze cron dziala pod userem 
reboot?! + google
pod userem
/bin/vpn.sh
pod rootem
widze icpm, ifconfig - brak ppp0
chmod ustawien pptp?
chmod 755 /etc/ppp/peers/vpn - to samo
Dziala tylko pod rootem
tz
root:
chmod 755 /bin/vpn.sh
user:
crontab -e
*/5 * * * * /bin/pingj.sh
*/5 * * * * /bin/vpn.sh
reboot, login gui / ssh as user = crontab run?
pod userem:
Error: only members of the 'dip' group can use this command.
google mowi:
adduser USERNAME dip
ale jaki jest user (system)
adduser sys dip
Witam.
Dziekuje,
pod rootem
crontab -l
*/5 * * * * /bin/vpn.sh
cat /bin/vpn.sh
#!/bin/sh
if ! ping -q -c 1 -W 10 192.168.5.70 > /dev/null; then
(pon vpn) &
fi
z tcpdump icmp pingi widze, ifconfig - brak ppp0
z pod roota manualnie /bin/vpn.sh - connection up
Przepisz sobie dropbeara żeby logował dane.
dzieki, milego
BR,
Jevgenij
Nie. arp ma wszystko - nawet to co próbowałeś pingować, co ma statyczny adres, to z czego przyszedł jakiś zabłądzony pakiet. A leases tylko to co zażądało adresu po dhcp.
dzieki,
mam czekawostka
Fri Oct 6 11:55:04 2017 authpriv.warn dropbear[20894]: Login attempt for nonexistent user from 36.33.24.70:27524
Fri Oct 6 11:55:04 2017 authpriv.warn dropbear[20894]: Login attempt for nonexistent user from 36.33.24.70:27524
Fri Oct 6 11:55:05 2017 authpriv.warn dropbear[20894]: Login attempt for nonexistent user from 36.33.24.70:27524
mozna jakis skript napisac, z jakim userem i haslem sie loguja?
nc -l -p 22 > /mnt/sda1/22.txt
sshd mam na innym porcie.
Witam,
router 192.168.10.145
mam sie martwic? < 1/2 tego mam w dhcp.leases, reszta jest nie wiem z kat.
192.168.10.68 0x1 0x0 60:21:c0:6f:93:93 * br-lan
192.168.10.77 0x1 0x2 68:9c:5e:e8:c6:fb * br-lan
192.168.10.86 0x1 0x0 68:9c:5e:22:ff:fc * br-lan
192.168.10.46 0x1 0x0 68:9c:5e:ae:c8:fc * br-lan
100.114.10.88 0x1 0x2 60:21:c0:6f:93:93 * br-lan
10.81.125.255 0x1 0x2 60:21:c0:6f:93:93 * br-lan
192.168.10.15 0x1 0x2 d8:90:e8:79:18:a4 * br-lan
192.168.10.64 0x1 0x2 68:9c:5e:de:f2:fc * br-lan
192.168.10.24 0x1 0x0 00:19:66:ff:34:66 * br-lan
192.168.10.73 0x1 0x0 84:3a:4b:4d:64:50 * br-lan
192.168.10.33 0x1 0x2 00:25:d3:63:87:37 * br-lan
192.168.10.2 0x1 0x0 68:9c:5e:ee:ca:fb * br-lan
192.168.10.60 0x1 0x0 68:9c:5e:ca:eb:fe * br-lan
192.168.10.11 0x1 0x0 68:9c:5e:f0:5d:fd * br-lan
192.168.10.78 0x1 0x0 08:2e:5f:30:61:25 * br-lan
192.168.10.87 0x1 0x2 00:08:22:2e:61:f1 * br-lan
192.168.10.38 0x1 0x0 68:9c:5e:de:b1:fc * br-lan
192.168.10.47 0x1 0x2 08:2e:5f:2f:da:d1 * br-lan
192.168.10.96 0x1 0x0 68:9c:5e:88:74:fe * br-lan
192.168.10.74 0x1 0x0 84:3a:4b:4d:64:50 * br-lan
192.168.10.34 0x1 0x0 00:1b:63:05:92:78 * br-lan
192.168.10.43 0x1 0x0 68:9c:5e:30:6e:fd * br-lan
192.168.10.48 0x1 0x2 00:08:22:08:74:fc * br-lan
192.168.10.17 0x1 0x2 00:08:22:b0:e5:fb * br-lan
192.168.10.26 0x1 0x0 1c:cb:99:6c:43:5c * br-lan
192.168.10.35 0x1 0x0 80:86:f2:af:72:c9 * br-lan
192.168.10.53 0x1 0x2 00:22:68:c9:d1:af * br-lan
192.168.10.22 0x1 0x0 f8:d1:11:0c:f3:6c * br-lan
192.168.10.89 0x1 0x0 74:c6:3b:84:dc:23 * br-lan
192.168.10.49 0x1 0x2 68:9c:5e:e0:14:fc * br-lan
192.168.10.9 0x1 0x0 68:9c:5e:5a:d2:fb * br-lan
100.115.254.162 0x1 0x2 60:21:c0:6f:93:93 * br-lan
192.168.10.18 0x1 0x0 00:21:9b:62:ad:14 * br-lan
192.168.10.254 0x1 0x2 28:10:7b:ce:f4:fa * br-lan
192.168.10.76 0x1 0x0 90:18:7c:4f:8d:5e * br-lan
192.168.10.27 0x1 0x0 68:9c:5e:2c:05:fc * br-lan
192.168.10.45 0x1 0x2 68:9c:5e:e0:c9:fb * br-lan
192.168.10.14 0x1 0x2 3c:bd:d8:f0:97:ad * br-lan
192.168.10.41 0x1 0x0 00:08:22:44:64:07 * br-lan
192.168.10.1 0x1 0x2 68:9c:5e:26:c5:fb * br-lan
192.168.10.50 0x1 0x0 68:9c:5e:32:90:fc * br-lan
BR,
Jevgenij
Nie działa. Na aukcji w której kupiłeś było wyraźnie napisane że wifi nie działa na ten płytce
widze ze nie ja jedem poluje na atherosy
czekawie to ze on to widzi
ok, dziekuje Cie
Witam,
root@OpenWrt:/# cat /proc/cpuinfo
system type : Atheros AR7240 rev 2
machine : TP-LINK TL-MR3420
processor : 0
cpu model : MIPS 24Kc V7.4
BogoMIPS : 265.42
wait instruction : yes
microsecond timers : yes
tlb_entries : 16
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
root@OpenWrt:/#
router ma 1 wan, 1 lan, 1 usb i wifi na mainboardzie AR9285.
64MB ram, 16MB spi
root@OpenWrt:/# lspci
00:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
root@OpenWrt:/# wifi detect > /etc/config/wireleass
root@OpenWrt:/# cat /etc/config/wireleass
root@OpenWrt:/#
nuby art jest ok, wifi na pci widzi ale....
sterowniki mam dla ath9k zainstalowany.
firmware:
http://dl.eko.one.pl/chaos_calmer/ar71x … actory.bin
Czy jest jakis pomysly jak to podniesc?
Dziekuje,
Pozdrawiam,
Jevgenij
eko.one.pl → Posty przez jevga
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc